You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@oodt.apache.org by "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov> on 2016/02/11 07:39:20 UTC
Balance profile module question
Good Evening Andrew Hart,
I was referred by Chris Mattman from JPL to consult you regarding an issue I’m having with the Balance profile module. I was wondering if you can help me?
I am currently working for JPL Data Sicence and Technology division. We are trying to deploy the ECAS system which uses various OODT’s modules including Balance profile module(https://github.com/apache/oodt/tree/master/balance/modules/profile). The instructions to install the Balance profile module states that I should copy paste the profile folder into my balance web application’s module folder (which is currently in /usr/local/ecas/ui/modules). However, after restarting apache, I’m still getting 404 when I visit my locally hosted web application url: http://localhost/ecas/profile/login (screenshot below). The url to my balance web application http://localhost/ecas works fine however.
[cid:91BEB018-C24B-4B6E-AA6B-97717DD95113]
This issue seems to indicate that I haven’t successfully installed profile. Is there another step to installing profile other than copying pasting the profile folder into my web app’s module folder?
I’m also wondering if it’s my apache conf file which I customized for the ECAS web application as well.
Thanks so much for your guidance!
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
David L.
Data Scientist
Data Science and Technology
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Re: Balance profile module question
Posted by "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>.
Thanks Chris and Tom!
I will make sure to continue to email through this thread:)
I will also definitely email the solution I find to this mailing list as well!
Kind Regards,
David
> On Feb 23, 2016, at 2:02 PM, Tom Barber <to...@meteorite.bi> wrote:
>
> I didn't diss the contribution, the more languages covered the better in
> fact!
>
> Everyone is allowed an opinion on programming language, no matter how
> tongue in cheek the comment may be.... there are many people who wouldn't
> write data processing engines in Java because its "sub optimal" doesn't
> mean that we listen to them, no does it stop me programming or contributing
> code in Java :)
>
> Anyway, that's all by the by. David, if you do fathom it out by yourself or
> with the help of Andrew, the other part of mailing list etiquette is to
> make sure you post the solution of whatever it was in case someone else
> hits the same blocker! :)
>
> Tom
>
> On Tue, Feb 23, 2016 at 9:52 PM, Chris Mattmann <ch...@gmail.com>
> wrote:
>
>> Or realize denigrating a language and contribution that
>> we have code to maintain in is not uber welcoming and
>> actually detracts people from contributing..but that’s just me.
>>
>> —
>> Chris Mattmann
>> chris.mattmann@gmail.com
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Tom Barber <to...@meteorite.bi>
>> Reply-To: <de...@oodt.apache.org>
>> Date: Tuesday, February 23, 2016 at 1:44 PM
>> To: "dev@oodt.apache.org" <de...@oodt.apache.org>
>> Subject: Re: Balance profile module question
>>
>>> (Or wait a few weeks, realise PHP is evil and go another route ;) )
>>>
>>> On Tue, Feb 23, 2016 at 9:43 PM, Chris Mattmann <chris.mattmann@gmail.com
>>>
>>> wrote:
>>>
>>>> Hi David,
>>>>
>>>> I would just send to dev@oodt.apache.org. That benefits
>>>> the community and ahart@apache.org (Andrew) is also subscribed
>>>> to the list. Thanks for asking these questions and for contributing
>>>> to the Apache community.
>>>>
>>>> Appreciate it and keep sending your questions! :) Andrew or whomever
>>>> can try to answer them and help out if they have the time, or at
>>>> least it’s out there if you figure out the answer you can also try
>>>> and start helping and answering too.
>>>>
>>>> Cheers,
>>>> Chris
>>>>
>>>> —
>>>> Chris Mattmann
>>>> chris.mattmann@gmail.com
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
>>>> Reply-To: <de...@oodt.apache.org>
>>>> Date: Tuesday, February 23, 2016 at 1:42 PM
>>>> To: jpluser <ch...@jpl.nasa.gov>
>>>> Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
>>>> (398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J
>>>> (3902)"
>>>> <da...@jpl.nasa.gov>
>>>> Subject: Re: Balance profile module question
>>>>
>>>>> Hi Chris,
>>>>>
>>>>> Thanks for the info! I subscribed to
>>>>> dev@oodt.apache.org<ma...@oodt.apache.org>.
>>>>>
>>>>> From now on, do I just send emails to directly to
>>>>> dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea
>> to
>>>>> send emails to andrew directly
>>>> ahart@apache.org<ma...@apache.org>?
>>>>>
>>>>> I’m trying to figure out the etiquette behind these mailing lists.
>>>>>
>>>>> Kind Regards!
>>>>> David
>>>>>
>>>>> On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
>>>>> <ch...@jpl.nasa.gov>>
>>>>> wrote:
>>>>>
>>>>> David, you need to subscribe - I had to moderate this message
>>>>> through.
>>>>>
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> Chris Mattmann, Ph.D.
>>>>> Chief Architect
>>>>> Instrument Software and Science Data Systems Section (398)
>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>> Office: 168-519, Mailstop: 168-527
>>>>> Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
>>>>> WWW: http://sunset.usc.edu/~mattmann/
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> Adjunct Associate Professor, Computer Science Department
>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: "Liu, David (3902-Affiliate)"
>>>>> <Da...@jpl.nasa.gov>>
>>>>> Date: Wednesday, February 10, 2016 at 10:39 PM
>>>>> To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
>>>>> <de...@oodt.apache.org>>
>>>>> Cc: jpluser
>>>>> <ch...@jpl.nasa.gov>>,
>>>>> "Kelly, Sean C
>>>>> (398G-Affiliate)"
>>>>> <se...@jpl.nasa.gov>>
>>>>> Subject: Balance profile module question
>>>>>
>>>>> Good Evening Andrew Hart,
>>>>>
>>>>>
>>>>> I was referred by Chris Mattman from JPL to consult you regarding an
>>>>> issue I’m having with the Balance profile module. I was wondering if
>>>> you
>>>>> can help me?
>>>>>
>>>>>
>>>>> I am currently working for JPL Data Sicence and Technology division. We
>>>>> are trying to deploy the ECAS system which uses various OODT’s modules
>>>>> including Balance profile
>>>>
>>>>> module(
>> https://github.com/apache/oodt/tree/master/balance/modules/profil
>>>>> e
>>>> )
>>>>> .
>>>>> The instructions to install the Balance profile module states that I
>>>>> should copy paste the profile folder into my balance web application’s
>>>>> module folder (which is currently in /usr/local/ecas/ui/modules).
>>>>> However, after restarting apache, I’m still getting 404 when I visit my
>>>>> locally hosted web application url:
>>>>> http://localhost/ecas/profile/login (screenshot below). The url to my
>>>>> balance web application http://localhost/ecas works fine however.
>>>>>
>>>>>
>>>>> PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This
>>>> issue
>>>>> seems to indicate that I haven’t successfully installed profile. Is
>>>> there
>>>>> another step to installing profile other than copying pasting the
>>>> profile
>>>>> folder into
>>>>> my web app’s module folder?
>>>>>
>>>>>
>>>>> I’m also wondering if it’s my apache conf file which I customized for
>>>> the
>>>>> ECAS web application as well.
>>>>>
>>>>>
>>>>> Thanks so much for your guidance!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> David L.
>>>>> Data Scientist
>>>>> Data Science and Technology
>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>
>>>>
>>>>
>>>>
>>
>>
>>
Re: Balance profile module question
Posted by Chris Mattmann <ch...@gmail.com>.
Right, regardless, I just don’t like to see the language
bashing on the list..despite my own opinions (which you’ll
find difficult to discern from the public Internet, but not
from say a pub chat..)
—
Chris Mattmann
chris.mattmann@gmail.com
-----Original Message-----
From: Tom Barber <to...@meteorite.bi>
Reply-To: <de...@oodt.apache.org>
Date: Tuesday, February 23, 2016 at 2:02 PM
To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Subject: Re: Balance profile module question
>I didn't diss the contribution, the more languages covered the better in
>fact!
>
>Everyone is allowed an opinion on programming language, no matter how
>tongue in cheek the comment may be.... there are many people who wouldn't
>write data processing engines in Java because its "sub optimal" doesn't
>mean that we listen to them, no does it stop me programming or
>contributing
>code in Java :)
>
>Anyway, that's all by the by. David, if you do fathom it out by yourself
>or
>with the help of Andrew, the other part of mailing list etiquette is to
>make sure you post the solution of whatever it was in case someone else
>hits the same blocker! :)
>
>Tom
>
>On Tue, Feb 23, 2016 at 9:52 PM, Chris Mattmann <ch...@gmail.com>
>wrote:
>
>> Or realize denigrating a language and contribution that
>> we have code to maintain in is not uber welcoming and
>> actually detracts people from contributing..but that’s just me.
>>
>> —
>> Chris Mattmann
>> chris.mattmann@gmail.com
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Tom Barber <to...@meteorite.bi>
>> Reply-To: <de...@oodt.apache.org>
>> Date: Tuesday, February 23, 2016 at 1:44 PM
>> To: "dev@oodt.apache.org" <de...@oodt.apache.org>
>> Subject: Re: Balance profile module question
>>
>> >(Or wait a few weeks, realise PHP is evil and go another route ;) )
>> >
>> >On Tue, Feb 23, 2016 at 9:43 PM, Chris Mattmann
>><chris.mattmann@gmail.com
>> >
>> >wrote:
>> >
>> >> Hi David,
>> >>
>> >> I would just send to dev@oodt.apache.org. That benefits
>> >> the community and ahart@apache.org (Andrew) is also subscribed
>> >> to the list. Thanks for asking these questions and for contributing
>> >> to the Apache community.
>> >>
>> >> Appreciate it and keep sending your questions! :) Andrew or whomever
>> >> can try to answer them and help out if they have the time, or at
>> >> least it’s out there if you figure out the answer you can also try
>> >> and start helping and answering too.
>> >>
>> >> Cheers,
>> >> Chris
>> >>
>> >> —
>> >> Chris Mattmann
>> >> chris.mattmann@gmail.com
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> -----Original Message-----
>> >> From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
>> >> Reply-To: <de...@oodt.apache.org>
>> >> Date: Tuesday, February 23, 2016 at 1:42 PM
>> >> To: jpluser <ch...@jpl.nasa.gov>
>> >> Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
>> >> (398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J
>> >>(3902)"
>> >> <da...@jpl.nasa.gov>
>> >> Subject: Re: Balance profile module question
>> >>
>> >> >Hi Chris,
>> >> >
>> >> >Thanks for the info! I subscribed to
>> >> >dev@oodt.apache.org<ma...@oodt.apache.org>.
>> >> >
>> >> >From now on, do I just send emails to directly to
>> >> >dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea
>> to
>> >> >send emails to andrew directly
>> >>ahart@apache.org<ma...@apache.org>?
>> >> >
>> >> >I’m trying to figure out the etiquette behind these mailing lists.
>> >> >
>> >> >Kind Regards!
>> >> >David
>> >> >
>> >> >On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
>> >>
>>><ch...@jpl.nasa.gov>>
>> >> >wrote:
>> >> >
>> >> >David, you need to subscribe - I had to moderate this message
>> >> >through.
>> >> >
>> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >> >Chris Mattmann, Ph.D.
>> >> >Chief Architect
>> >> >Instrument Software and Science Data Systems Section (398)
>> >> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> >> >Office: 168-519, Mailstop: 168-527
>> >> >Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
>> >> >WWW: http://sunset.usc.edu/~mattmann/
>> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >> >Adjunct Associate Professor, Computer Science Department
>> >> >University of Southern California, Los Angeles, CA 90089 USA
>> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >-----Original Message-----
>> >> >From: "Liu, David (3902-Affiliate)"
>> >> ><Da...@jpl.nasa.gov>>
>> >> >Date: Wednesday, February 10, 2016 at 10:39 PM
>> >> >To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
>> >> ><de...@oodt.apache.org>>
>> >> >Cc: jpluser
>> >>
>>><ch...@jpl.nasa.gov>>,
>> >> >"Kelly, Sean C
>> >> >(398G-Affiliate)"
>> >> ><se...@jpl.nasa.gov>>
>> >> >Subject: Balance profile module question
>> >> >
>> >> >Good Evening Andrew Hart,
>> >> >
>> >> >
>> >> >I was referred by Chris Mattman from JPL to consult you regarding an
>> >> >issue I’m having with the Balance profile module. I was wondering if
>> >>you
>> >> >can help me?
>> >> >
>> >> >
>> >> >I am currently working for JPL Data Sicence and Technology
>>division. We
>> >> >are trying to deploy the ECAS system which uses various OODT’s
>>modules
>> >> >including Balance profile
>> >>
>> >>>module(
>> https://github.com/apache/oodt/tree/master/balance/modules/profil
>> >>>e
>> >> )
>> >> >.
>> >> >The instructions to install the Balance profile module states that I
>> >> >should copy paste the profile folder into my balance web
>>application’s
>> >> >module folder (which is currently in /usr/local/ecas/ui/modules).
>> >> >However, after restarting apache, I’m still getting 404 when I
>>visit my
>> >> >locally hosted web application url:
>> >> >http://localhost/ecas/profile/login (screenshot below). The url to
>>my
>> >> >balance web application http://localhost/ecas works fine however.
>> >> >
>> >> >
>> >> >PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This
>> >>issue
>> >> >seems to indicate that I haven’t successfully installed profile. Is
>> >>there
>> >> >another step to installing profile other than copying pasting the
>> >>profile
>> >> >folder into
>> >> >my web app’s module folder?
>> >> >
>> >> >
>> >> >I’m also wondering if it’s my apache conf file which I customized
>>for
>> >>the
>> >> >ECAS web application as well.
>> >> >
>> >> >
>> >> >Thanks so much for your guidance!
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >> >David L.
>> >> >Data Scientist
>> >> >Data Science and Technology
>> >> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> >> >
>> >>
>> >>
>> >>
>>
>>
>>
Re: Balance profile module question
Posted by Tom Barber <to...@meteorite.bi>.
I didn't diss the contribution, the more languages covered the better in
fact!
Everyone is allowed an opinion on programming language, no matter how
tongue in cheek the comment may be.... there are many people who wouldn't
write data processing engines in Java because its "sub optimal" doesn't
mean that we listen to them, no does it stop me programming or contributing
code in Java :)
Anyway, that's all by the by. David, if you do fathom it out by yourself or
with the help of Andrew, the other part of mailing list etiquette is to
make sure you post the solution of whatever it was in case someone else
hits the same blocker! :)
Tom
On Tue, Feb 23, 2016 at 9:52 PM, Chris Mattmann <ch...@gmail.com>
wrote:
> Or realize denigrating a language and contribution that
> we have code to maintain in is not uber welcoming and
> actually detracts people from contributing..but that’s just me.
>
> —
> Chris Mattmann
> chris.mattmann@gmail.com
>
>
>
>
>
>
> -----Original Message-----
> From: Tom Barber <to...@meteorite.bi>
> Reply-To: <de...@oodt.apache.org>
> Date: Tuesday, February 23, 2016 at 1:44 PM
> To: "dev@oodt.apache.org" <de...@oodt.apache.org>
> Subject: Re: Balance profile module question
>
> >(Or wait a few weeks, realise PHP is evil and go another route ;) )
> >
> >On Tue, Feb 23, 2016 at 9:43 PM, Chris Mattmann <chris.mattmann@gmail.com
> >
> >wrote:
> >
> >> Hi David,
> >>
> >> I would just send to dev@oodt.apache.org. That benefits
> >> the community and ahart@apache.org (Andrew) is also subscribed
> >> to the list. Thanks for asking these questions and for contributing
> >> to the Apache community.
> >>
> >> Appreciate it and keep sending your questions! :) Andrew or whomever
> >> can try to answer them and help out if they have the time, or at
> >> least it’s out there if you figure out the answer you can also try
> >> and start helping and answering too.
> >>
> >> Cheers,
> >> Chris
> >>
> >> —
> >> Chris Mattmann
> >> chris.mattmann@gmail.com
> >>
> >>
> >>
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
> >> Reply-To: <de...@oodt.apache.org>
> >> Date: Tuesday, February 23, 2016 at 1:42 PM
> >> To: jpluser <ch...@jpl.nasa.gov>
> >> Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
> >> (398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J
> >>(3902)"
> >> <da...@jpl.nasa.gov>
> >> Subject: Re: Balance profile module question
> >>
> >> >Hi Chris,
> >> >
> >> >Thanks for the info! I subscribed to
> >> >dev@oodt.apache.org<ma...@oodt.apache.org>.
> >> >
> >> >From now on, do I just send emails to directly to
> >> >dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea
> to
> >> >send emails to andrew directly
> >>ahart@apache.org<ma...@apache.org>?
> >> >
> >> >I’m trying to figure out the etiquette behind these mailing lists.
> >> >
> >> >Kind Regards!
> >> >David
> >> >
> >> >On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
> >> ><ch...@jpl.nasa.gov>>
> >> >wrote:
> >> >
> >> >David, you need to subscribe - I had to moderate this message
> >> >through.
> >> >
> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> >Chris Mattmann, Ph.D.
> >> >Chief Architect
> >> >Instrument Software and Science Data Systems Section (398)
> >> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >> >Office: 168-519, Mailstop: 168-527
> >> >Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
> >> >WWW: http://sunset.usc.edu/~mattmann/
> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> >Adjunct Associate Professor, Computer Science Department
> >> >University of Southern California, Los Angeles, CA 90089 USA
> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >-----Original Message-----
> >> >From: "Liu, David (3902-Affiliate)"
> >> ><Da...@jpl.nasa.gov>>
> >> >Date: Wednesday, February 10, 2016 at 10:39 PM
> >> >To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
> >> ><de...@oodt.apache.org>>
> >> >Cc: jpluser
> >> ><ch...@jpl.nasa.gov>>,
> >> >"Kelly, Sean C
> >> >(398G-Affiliate)"
> >> ><se...@jpl.nasa.gov>>
> >> >Subject: Balance profile module question
> >> >
> >> >Good Evening Andrew Hart,
> >> >
> >> >
> >> >I was referred by Chris Mattman from JPL to consult you regarding an
> >> >issue I’m having with the Balance profile module. I was wondering if
> >>you
> >> >can help me?
> >> >
> >> >
> >> >I am currently working for JPL Data Sicence and Technology division. We
> >> >are trying to deploy the ECAS system which uses various OODT’s modules
> >> >including Balance profile
> >>
> >>>module(
> https://github.com/apache/oodt/tree/master/balance/modules/profil
> >>>e
> >> )
> >> >.
> >> >The instructions to install the Balance profile module states that I
> >> >should copy paste the profile folder into my balance web application’s
> >> >module folder (which is currently in /usr/local/ecas/ui/modules).
> >> >However, after restarting apache, I’m still getting 404 when I visit my
> >> >locally hosted web application url:
> >> >http://localhost/ecas/profile/login (screenshot below). The url to my
> >> >balance web application http://localhost/ecas works fine however.
> >> >
> >> >
> >> >PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This
> >>issue
> >> >seems to indicate that I haven’t successfully installed profile. Is
> >>there
> >> >another step to installing profile other than copying pasting the
> >>profile
> >> >folder into
> >> >my web app’s module folder?
> >> >
> >> >
> >> >I’m also wondering if it’s my apache conf file which I customized for
> >>the
> >> >ECAS web application as well.
> >> >
> >> >
> >> >Thanks so much for your guidance!
> >> >
> >> >
> >> >
> >> >
> >> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> >David L.
> >> >Data Scientist
> >> >Data Science and Technology
> >> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >> >
> >>
> >>
> >>
>
>
>
Re: Balance profile module question
Posted by Chris Mattmann <ch...@gmail.com>.
Or realize denigrating a language and contribution that
we have code to maintain in is not uber welcoming and
actually detracts people from contributing..but that’s just me.
—
Chris Mattmann
chris.mattmann@gmail.com
-----Original Message-----
From: Tom Barber <to...@meteorite.bi>
Reply-To: <de...@oodt.apache.org>
Date: Tuesday, February 23, 2016 at 1:44 PM
To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Subject: Re: Balance profile module question
>(Or wait a few weeks, realise PHP is evil and go another route ;) )
>
>On Tue, Feb 23, 2016 at 9:43 PM, Chris Mattmann <ch...@gmail.com>
>wrote:
>
>> Hi David,
>>
>> I would just send to dev@oodt.apache.org. That benefits
>> the community and ahart@apache.org (Andrew) is also subscribed
>> to the list. Thanks for asking these questions and for contributing
>> to the Apache community.
>>
>> Appreciate it and keep sending your questions! :) Andrew or whomever
>> can try to answer them and help out if they have the time, or at
>> least it’s out there if you figure out the answer you can also try
>> and start helping and answering too.
>>
>> Cheers,
>> Chris
>>
>> —
>> Chris Mattmann
>> chris.mattmann@gmail.com
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
>> Reply-To: <de...@oodt.apache.org>
>> Date: Tuesday, February 23, 2016 at 1:42 PM
>> To: jpluser <ch...@jpl.nasa.gov>
>> Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
>> (398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J
>>(3902)"
>> <da...@jpl.nasa.gov>
>> Subject: Re: Balance profile module question
>>
>> >Hi Chris,
>> >
>> >Thanks for the info! I subscribed to
>> >dev@oodt.apache.org<ma...@oodt.apache.org>.
>> >
>> >From now on, do I just send emails to directly to
>> >dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea to
>> >send emails to andrew directly
>>ahart@apache.org<ma...@apache.org>?
>> >
>> >I’m trying to figure out the etiquette behind these mailing lists.
>> >
>> >Kind Regards!
>> >David
>> >
>> >On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
>> ><ch...@jpl.nasa.gov>>
>> >wrote:
>> >
>> >David, you need to subscribe - I had to moderate this message
>> >through.
>> >
>> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >Chris Mattmann, Ph.D.
>> >Chief Architect
>> >Instrument Software and Science Data Systems Section (398)
>> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> >Office: 168-519, Mailstop: 168-527
>> >Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
>> >WWW: http://sunset.usc.edu/~mattmann/
>> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >Adjunct Associate Professor, Computer Science Department
>> >University of Southern California, Los Angeles, CA 90089 USA
>> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >
>> >
>> >
>> >
>> >
>> >-----Original Message-----
>> >From: "Liu, David (3902-Affiliate)"
>> ><Da...@jpl.nasa.gov>>
>> >Date: Wednesday, February 10, 2016 at 10:39 PM
>> >To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
>> ><de...@oodt.apache.org>>
>> >Cc: jpluser
>> ><ch...@jpl.nasa.gov>>,
>> >"Kelly, Sean C
>> >(398G-Affiliate)"
>> ><se...@jpl.nasa.gov>>
>> >Subject: Balance profile module question
>> >
>> >Good Evening Andrew Hart,
>> >
>> >
>> >I was referred by Chris Mattman from JPL to consult you regarding an
>> >issue I’m having with the Balance profile module. I was wondering if
>>you
>> >can help me?
>> >
>> >
>> >I am currently working for JPL Data Sicence and Technology division. We
>> >are trying to deploy the ECAS system which uses various OODT’s modules
>> >including Balance profile
>>
>>>module(https://github.com/apache/oodt/tree/master/balance/modules/profil
>>>e
>> )
>> >.
>> >The instructions to install the Balance profile module states that I
>> >should copy paste the profile folder into my balance web application’s
>> >module folder (which is currently in /usr/local/ecas/ui/modules).
>> >However, after restarting apache, I’m still getting 404 when I visit my
>> >locally hosted web application url:
>> >http://localhost/ecas/profile/login (screenshot below). The url to my
>> >balance web application http://localhost/ecas works fine however.
>> >
>> >
>> >PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This
>>issue
>> >seems to indicate that I haven’t successfully installed profile. Is
>>there
>> >another step to installing profile other than copying pasting the
>>profile
>> >folder into
>> >my web app’s module folder?
>> >
>> >
>> >I’m also wondering if it’s my apache conf file which I customized for
>>the
>> >ECAS web application as well.
>> >
>> >
>> >Thanks so much for your guidance!
>> >
>> >
>> >
>> >
>> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >David L.
>> >Data Scientist
>> >Data Science and Technology
>> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> >
>>
>>
>>
Re: Balance profile module question
Posted by Tom Barber <to...@meteorite.bi>.
(Or wait a few weeks, realise PHP is evil and go another route ;) )
On Tue, Feb 23, 2016 at 9:43 PM, Chris Mattmann <ch...@gmail.com>
wrote:
> Hi David,
>
> I would just send to dev@oodt.apache.org. That benefits
> the community and ahart@apache.org (Andrew) is also subscribed
> to the list. Thanks for asking these questions and for contributing
> to the Apache community.
>
> Appreciate it and keep sending your questions! :) Andrew or whomever
> can try to answer them and help out if they have the time, or at
> least it’s out there if you figure out the answer you can also try
> and start helping and answering too.
>
> Cheers,
> Chris
>
> —
> Chris Mattmann
> chris.mattmann@gmail.com
>
>
>
>
>
>
> -----Original Message-----
> From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
> Reply-To: <de...@oodt.apache.org>
> Date: Tuesday, February 23, 2016 at 1:42 PM
> To: jpluser <ch...@jpl.nasa.gov>
> Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
> (398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J (3902)"
> <da...@jpl.nasa.gov>
> Subject: Re: Balance profile module question
>
> >Hi Chris,
> >
> >Thanks for the info! I subscribed to
> >dev@oodt.apache.org<ma...@oodt.apache.org>.
> >
> >From now on, do I just send emails to directly to
> >dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea to
> >send emails to andrew directly ahart@apache.org<ma...@apache.org>?
> >
> >I’m trying to figure out the etiquette behind these mailing lists.
> >
> >Kind Regards!
> >David
> >
> >On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
> ><ch...@jpl.nasa.gov>>
> >wrote:
> >
> >David, you need to subscribe - I had to moderate this message
> >through.
> >
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >Chris Mattmann, Ph.D.
> >Chief Architect
> >Instrument Software and Science Data Systems Section (398)
> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >Office: 168-519, Mailstop: 168-527
> >Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
> >WWW: http://sunset.usc.edu/~mattmann/
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >Adjunct Associate Professor, Computer Science Department
> >University of Southern California, Los Angeles, CA 90089 USA
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >
> >
> >
> >
> >
> >-----Original Message-----
> >From: "Liu, David (3902-Affiliate)"
> ><Da...@jpl.nasa.gov>>
> >Date: Wednesday, February 10, 2016 at 10:39 PM
> >To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
> ><de...@oodt.apache.org>>
> >Cc: jpluser
> ><ch...@jpl.nasa.gov>>,
> >"Kelly, Sean C
> >(398G-Affiliate)"
> ><se...@jpl.nasa.gov>>
> >Subject: Balance profile module question
> >
> >Good Evening Andrew Hart,
> >
> >
> >I was referred by Chris Mattman from JPL to consult you regarding an
> >issue I’m having with the Balance profile module. I was wondering if you
> >can help me?
> >
> >
> >I am currently working for JPL Data Sicence and Technology division. We
> >are trying to deploy the ECAS system which uses various OODT’s modules
> >including Balance profile
> >module(https://github.com/apache/oodt/tree/master/balance/modules/profile
> )
> >.
> >The instructions to install the Balance profile module states that I
> >should copy paste the profile folder into my balance web application’s
> >module folder (which is currently in /usr/local/ecas/ui/modules).
> >However, after restarting apache, I’m still getting 404 when I visit my
> >locally hosted web application url:
> >http://localhost/ecas/profile/login (screenshot below). The url to my
> >balance web application http://localhost/ecas works fine however.
> >
> >
> >PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This issue
> >seems to indicate that I haven’t successfully installed profile. Is there
> >another step to installing profile other than copying pasting the profile
> >folder into
> >my web app’s module folder?
> >
> >
> >I’m also wondering if it’s my apache conf file which I customized for the
> >ECAS web application as well.
> >
> >
> >Thanks so much for your guidance!
> >
> >
> >
> >
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >David L.
> >Data Scientist
> >Data Science and Technology
> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >
>
>
>
Re: Balance profile module question
Posted by Lewis John Mcgibbney <le...@gmail.com>.
ACK
On Tue, Feb 23, 2016 at 1:43 PM, Chris Mattmann <ch...@gmail.com>
wrote:
> Hi David,
>
> I would just send to dev@oodt.apache.org. That benefits
> the community and ahart@apache.org (Andrew) is also subscribed
> to the list. Thanks for asking these questions and for contributing
> to the Apache community.
>
> Appreciate it and keep sending your questions! :) Andrew or whomever
> can try to answer them and help out if they have the time, or at
> least it’s out there if you figure out the answer you can also try
> and start helping and answering too.
>
> Cheers,
> Chris
>
> —
> Chris Mattmann
> chris.mattmann@gmail.com
>
>
>
>
>
>
> -----Original Message-----
> From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
> Reply-To: <de...@oodt.apache.org>
> Date: Tuesday, February 23, 2016 at 1:42 PM
> To: jpluser <ch...@jpl.nasa.gov>
> Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
> (398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J (3902)"
> <da...@jpl.nasa.gov>
> Subject: Re: Balance profile module question
>
> >Hi Chris,
> >
> >Thanks for the info! I subscribed to
> >dev@oodt.apache.org<ma...@oodt.apache.org>.
> >
> >From now on, do I just send emails to directly to
> >dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea to
> >send emails to andrew directly ahart@apache.org<ma...@apache.org>?
> >
> >I’m trying to figure out the etiquette behind these mailing lists.
> >
> >Kind Regards!
> >David
> >
> >On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
> ><ch...@jpl.nasa.gov>>
> >wrote:
> >
> >David, you need to subscribe - I had to moderate this message
> >through.
> >
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >Chris Mattmann, Ph.D.
> >Chief Architect
> >Instrument Software and Science Data Systems Section (398)
> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >Office: 168-519, Mailstop: 168-527
> >Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
> >WWW: http://sunset.usc.edu/~mattmann/
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >Adjunct Associate Professor, Computer Science Department
> >University of Southern California, Los Angeles, CA 90089 USA
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >
> >
> >
> >
> >
> >-----Original Message-----
> >From: "Liu, David (3902-Affiliate)"
> ><Da...@jpl.nasa.gov>>
> >Date: Wednesday, February 10, 2016 at 10:39 PM
> >To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
> ><de...@oodt.apache.org>>
> >Cc: jpluser
> ><ch...@jpl.nasa.gov>>,
> >"Kelly, Sean C
> >(398G-Affiliate)"
> ><se...@jpl.nasa.gov>>
> >Subject: Balance profile module question
> >
> >Good Evening Andrew Hart,
> >
> >
> >I was referred by Chris Mattman from JPL to consult you regarding an
> >issue I’m having with the Balance profile module. I was wondering if you
> >can help me?
> >
> >
> >I am currently working for JPL Data Sicence and Technology division. We
> >are trying to deploy the ECAS system which uses various OODT’s modules
> >including Balance profile
> >module(https://github.com/apache/oodt/tree/master/balance/modules/profile
> )
> >.
> >The instructions to install the Balance profile module states that I
> >should copy paste the profile folder into my balance web application’s
> >module folder (which is currently in /usr/local/ecas/ui/modules).
> >However, after restarting apache, I’m still getting 404 when I visit my
> >locally hosted web application url:
> >http://localhost/ecas/profile/login (screenshot below). The url to my
> >balance web application http://localhost/ecas works fine however.
> >
> >
> >PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This issue
> >seems to indicate that I haven’t successfully installed profile. Is there
> >another step to installing profile other than copying pasting the profile
> >folder into
> >my web app’s module folder?
> >
> >
> >I’m also wondering if it’s my apache conf file which I customized for the
> >ECAS web application as well.
> >
> >
> >Thanks so much for your guidance!
> >
> >
> >
> >
> >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >David L.
> >Data Scientist
> >Data Science and Technology
> >NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >
>
>
>
--
*Lewis*
Re: Balance profile module question
Posted by Chris Mattmann <ch...@gmail.com>.
Hi David,
I would just send to dev@oodt.apache.org. That benefits
the community and ahart@apache.org (Andrew) is also subscribed
to the list. Thanks for asking these questions and for contributing
to the Apache community.
Appreciate it and keep sending your questions! :) Andrew or whomever
can try to answer them and help out if they have the time, or at
least it’s out there if you figure out the answer you can also try
and start helping and answering too.
Cheers,
Chris
—
Chris Mattmann
chris.mattmann@gmail.com
-----Original Message-----
From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
Reply-To: <de...@oodt.apache.org>
Date: Tuesday, February 23, 2016 at 1:42 PM
To: jpluser <ch...@jpl.nasa.gov>
Cc: "dev@oodt.apache.org" <de...@oodt.apache.org>, "Kelly, Sean C
(398G-Affiliate)" <se...@jpl.nasa.gov>, "Crichton, Daniel J (3902)"
<da...@jpl.nasa.gov>
Subject: Re: Balance profile module question
>Hi Chris,
>
>Thanks for the info! I subscribed to
>dev@oodt.apache.org<ma...@oodt.apache.org>.
>
>From now on, do I just send emails to directly to
>dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea to
>send emails to andrew directly ahart@apache.org<ma...@apache.org>?
>
>I’m trying to figure out the etiquette behind these mailing lists.
>
>Kind Regards!
>David
>
>On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980)
><ch...@jpl.nasa.gov>>
>wrote:
>
>David, you need to subscribe - I had to moderate this message
>through.
>
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>Chris Mattmann, Ph.D.
>Chief Architect
>Instrument Software and Science Data Systems Section (398)
>NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>Office: 168-519, Mailstop: 168-527
>Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
>WWW: http://sunset.usc.edu/~mattmann/
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>Adjunct Associate Professor, Computer Science Department
>University of Southern California, Los Angeles, CA 90089 USA
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
>
>-----Original Message-----
>From: "Liu, David (3902-Affiliate)"
><Da...@jpl.nasa.gov>>
>Date: Wednesday, February 10, 2016 at 10:39 PM
>To: "dev@oodt.apache.org<ma...@oodt.apache.org>"
><de...@oodt.apache.org>>
>Cc: jpluser
><ch...@jpl.nasa.gov>>,
>"Kelly, Sean C
>(398G-Affiliate)"
><se...@jpl.nasa.gov>>
>Subject: Balance profile module question
>
>Good Evening Andrew Hart,
>
>
>I was referred by Chris Mattman from JPL to consult you regarding an
>issue I’m having with the Balance profile module. I was wondering if you
>can help me?
>
>
>I am currently working for JPL Data Sicence and Technology division. We
>are trying to deploy the ECAS system which uses various OODT’s modules
>including Balance profile
>module(https://github.com/apache/oodt/tree/master/balance/modules/profile)
>.
>The instructions to install the Balance profile module states that I
>should copy paste the profile folder into my balance web application’s
>module folder (which is currently in /usr/local/ecas/ui/modules).
>However, after restarting apache, I’m still getting 404 when I visit my
>locally hosted web application url:
>http://localhost/ecas/profile/login (screenshot below). The url to my
>balance web application http://localhost/ecas works fine however.
>
>
>PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This issue
>seems to indicate that I haven’t successfully installed profile. Is there
>another step to installing profile other than copying pasting the profile
>folder into
>my web app’s module folder?
>
>
>I’m also wondering if it’s my apache conf file which I customized for the
>ECAS web application as well.
>
>
>Thanks so much for your guidance!
>
>
>
>
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>David L.
>Data Scientist
>Data Science and Technology
>NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>
Re: Balance profile module question
Posted by "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>.
Hi Chris,
Thanks for the info! I subscribed to dev@oodt.apache.org<ma...@oodt.apache.org>.
From now on, do I just send emails to directly to dev@oodt.apache.org<ma...@oodt.apache.org>, or is it a bad idea to send emails to andrew directly ahart@apache.org<ma...@apache.org>?
I’m trying to figure out the etiquette behind these mailing lists.
Kind Regards!
David
On Feb 10, 2016, at 10:52 PM, Mattmann, Chris A (3980) <ch...@jpl.nasa.gov>> wrote:
David, you need to subscribe - I had to moderate this message
through.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Chris Mattmann, Ph.D.
Chief Architect
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 168-519, Mailstop: 168-527
Email: chris.a.mattmann@nasa.gov<ma...@nasa.gov>
WWW: http://sunset.usc.edu/~mattmann/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Adjunct Associate Professor, Computer Science Department
University of Southern California, Los Angeles, CA 90089 USA
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-----Original Message-----
From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>>
Date: Wednesday, February 10, 2016 at 10:39 PM
To: "dev@oodt.apache.org<ma...@oodt.apache.org>" <de...@oodt.apache.org>>
Cc: jpluser <ch...@jpl.nasa.gov>>, "Kelly, Sean C
(398G-Affiliate)" <se...@jpl.nasa.gov>>
Subject: Balance profile module question
Good Evening Andrew Hart,
I was referred by Chris Mattman from JPL to consult you regarding an
issue I’m having with the Balance profile module. I was wondering if you
can help me?
I am currently working for JPL Data Sicence and Technology division. We
are trying to deploy the ECAS system which uses various OODT’s modules
including Balance profile
module(https://github.com/apache/oodt/tree/master/balance/modules/profile)
.
The instructions to install the Balance profile module states that I
should copy paste the profile folder into my balance web application’s
module folder (which is currently in /usr/local/ecas/ui/modules).
However, after restarting apache, I’m still getting 404 when I visit my
locally hosted web application url:
http://localhost/ecas/profile/login (screenshot below). The url to my
balance web application http://localhost/ecas works fine however.
PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This issue
seems to indicate that I haven’t successfully installed profile. Is there
another step to installing profile other than copying pasting the profile
folder into
my web app’s module folder?
I’m also wondering if it’s my apache conf file which I customized for the
ECAS web application as well.
Thanks so much for your guidance!
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
David L.
Data Scientist
Data Science and Technology
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Re: Balance profile module question
Posted by "Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov>.
David, you need to subscribe - I had to moderate this message
through.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Chris Mattmann, Ph.D.
Chief Architect
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 168-519, Mailstop: 168-527
Email: chris.a.mattmann@nasa.gov
WWW: http://sunset.usc.edu/~mattmann/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Adjunct Associate Professor, Computer Science Department
University of Southern California, Los Angeles, CA 90089 USA
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-----Original Message-----
From: "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
Date: Wednesday, February 10, 2016 at 10:39 PM
To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Cc: jpluser <ch...@jpl.nasa.gov>, "Kelly, Sean C
(398G-Affiliate)" <se...@jpl.nasa.gov>
Subject: Balance profile module question
>Good Evening Andrew Hart,
>
>
>I was referred by Chris Mattman from JPL to consult you regarding an
>issue I’m having with the Balance profile module. I was wondering if you
>can help me?
>
>
>I am currently working for JPL Data Sicence and Technology division. We
>are trying to deploy the ECAS system which uses various OODT’s modules
>including Balance profile
>module(https://github.com/apache/oodt/tree/master/balance/modules/profile)
>.
> The instructions to install the Balance profile module states that I
>should copy paste the profile folder into my balance web application’s
>module folder (which is currently in /usr/local/ecas/ui/modules).
> However, after restarting apache, I’m still getting 404 when I visit my
>locally hosted web application url:
>http://localhost/ecas/profile/login (screenshot below). The url to my
>balance web application http://localhost/ecas works fine however.
>
>
>PastedGraphic-1.tiff <cid:91BEB018-C24B-4B6E-AA6B-97717DD95113>This issue
>seems to indicate that I haven’t successfully installed profile. Is there
>another step to installing profile other than copying pasting the profile
>folder into
> my web app’s module folder?
>
>
>I’m also wondering if it’s my apache conf file which I customized for the
>ECAS web application as well.
>
>
>Thanks so much for your guidance!
>
>
>
>
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>David L.
>Data Scientist
>Data Science and Technology
>NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>
Re: Balance profile module question
Posted by Andrew Hart <ah...@apache.org>.
Hi David,
There are any number of possible reasons for this. Most of them,
unfortunately are environment specific and difficult to diagnose
remotely. I just created a new Balance site from scratch on a clean
machine, and was able to get to the point where the profile module
loaded correctly using just the copy-and-paste method from the
instructions, so I think there's something going on with your local
environment (mod-rewrite? permissions? difficult to say without more
information). I've compiled each step I took into a gist, linked below.
If you still have difficulties, please write again, and I'll be glad to
help you investigate further.
https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
Best,
Andrew.
On 2/10/16 10:39 PM, Liu, David (3902-Affiliate) wrote:
> Good Evening Andrew Hart,
>
> I was referred by Chris Mattman from JPL to consult you regarding an
> issue I’m having with the Balance profile module. I was wondering if
> you can help me?
>
> I am currently working for JPL Data Sicence and Technology division.
> We are trying to deploy the ECAS system which uses various OODT’s
> modules including Balance profile
> module(https://github.com/apache/oodt/tree/master/balance/modules/profile).
> The instructions to install the Balance profile module states that I
> should copy paste the profile folder into my balance web application’s
> module folder (which is currently in /usr/local/ecas/ui/modules).
> However, after restarting apache, I’m still getting 404 when I visit
> my locally hosted web application url:
> http://localhost/ecas/profile/login (screenshot below). The url to my
> balance web application http://localhost/ecas works fine however.
> This issue seems to indicate that I haven’t successfully installed
> profile. Is there another step to installing profile other than
> copying pasting the profile folder into my web app’s module folder?
>
> I’m also wondering if it’s my apache conf file which I customized for
> the ECAS web application as well.
>
> Thanks so much for your guidance!
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> David L.
> Data Scientist
> Data Science and Technology
> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>
--
Andrew Hart
Member, Apache Software Foundation
w: http://people.apache.org/~ahart
e: ahart@apache.org
Re: Balance profile module question
Posted by Tom Barber <to...@meteorite.bi>.
Hey David
Thanks for the update, glad you made progress. We all learnt something
new, you learnt to check the logs and I learnt if I mock programming
languages I'll incur the wrath of Chris Mattmann ; )
If there are things we should be doing documentation or tutorial-wise feel
free to offer up suggestions or, in keeping with community stuff , let us
know and we'll get you wiki access so you can improve it yourself!
Any other OODT based questions, just ask away on the list , that's what
we're here for.
Tom
On 29 Feb 2016 16:17, "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>
wrote:
> Thanks Tom,
>
> Indeed, after taking a more careful look at the apache errors/php errors,
> I realized that I had multiple copies of the profile login module which
> made it difficult to figure out which code was the actual code running.
>
> One copy of my code was running with jpl's implementation of
> authentication while the other was Apache’s.
>
> So I changed all of my code to point from Jpl’s into Apache’s and now the
> login works!
>
> If there is a lesson that I learned, it’s not be a noob and look more
> carefully at all possible error logs…
>
> Thanks guys for all your help! Now I have to go bother Chris Mattman
> specifically now.
>
> Cheers,
> David
>
> > On Feb 23, 2016, at 3:33 PM, Tom Barber <to...@meteorite.bi> wrote:
> >
> > I'm not a PHP dev(you might have fathomed), but knowing what my brother
> > does, just get it to dump them to the page and you will be able to see if
> > its throwing up over the OODT code or lack of import or something.
> >
> > On Tue, Feb 23, 2016 at 11:30 PM, Liu, David (3902-Affiliate) <
> > David.Liu@jpl.nasa.gov> wrote:
> >
> >> Sigh, silly me, that probably should have been the first or second
> thing I
> >> should have been doing. I was just looking at apache error logs the
> whole
> >> time.
> >>
> >> Thanks Tom!
> >> David
> >>
> >>> On Feb 23, 2016, at 3:26 PM, Tom Barber <to...@meteorite.bi>
> wrote:
> >>>
> >>> Might be a silly question, but have you switched on the PHP error logs
> in
> >>> php.ini to see what errors its spewing out?
> >>>
> >>> Tom
> >>>
> >>> On Tue, Feb 23, 2016 at 11:20 PM, Liu, David (3902-Affiliate) <
> >>> David.Liu@jpl.nasa.gov> wrote:
> >>>
> >>>> Hi Andrew,
> >>>>
> >>>> I’m sending you this email through formalized channel instead of your
> >>>> private email box!
> >>>>
> >>>> I tried following your instructions (
> >>>> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4)
> >>>> and was successful for the most part. However, when I got to the end
> >>>> following copying pasting the profile module, I tried visiting the
> >>>> http://balance-test/profile/login
> >>>> and got the following error on my console:
> >>>> The webpage shows up blank. However, http://balance-test works
> >> perfectly
> >>>> fine!
> >>>>
> >>>> I’ll continue to investigate but maybe it’s some issues with my local
> >>>> environment.
> >>>>
> >>>> Kind Regards,
> >>>> David
> >>>>
> >>>> On 2/12/16 11:00 AM, "Andrew Hart" <ah...@apache.org> wrote:
> >>>>
> >>>> Hi David,
> >>>>
> >>>> There are any number of possible reasons for this. Most of them,
> >>>> unfortunately are environment specific and difficult to diagnose
> >>>> remotely. I just created a new Balance site from scratch on a clean
> >>>> machine, and was able to get to the point where the profile module
> >>>> loaded correctly using just the copy-and-paste method from the
> >>>> instructions, so I think there's something going on with your local
> >>>> environment (mod-rewrite? permissions? difficult to say without more
> >>>> information). I've compiled each step I took into a gist, linked
> below.
> >>>> If you still have difficulties, please write again, and I'll be glad
> to
> >>>> help you investigate further.
> >>>>
> >>>> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
> >>>>
> >>>> Best,
> >>>> Andrew.
> >>>>
> >>>>
> >>>>
> >>>> On Feb 10, 2016, at 10:51 PM, Liu, David (398G-Affiliate) <
> >>>> yuliu@jpl.nasa.gov> wrote:
> >>>>
> >>>> Good Evening Andrew Hart,
> >>>>
> >>>> I was referred by Chris Mattman from JPL to consult you regarding an
> >>>> issue I’m having with the Balance profile module. I was wondering if
> you
> >>>> can help me?
> >>>>
> >>>> I am currently working for JPL Data Sicence and Technology division.
> We
> >>>> are trying to deploy the ECAS system which uses various OODT’s modules
> >>>> including Balance profile module(
> >>>> https://github.com/apache/oodt/tree/master/balance/modules/profile).
> >> The
> >>>> instructions to install the Balance profile module states that I
> should
> >>>> copy paste the profile folder into my balance web application’s module
> >>>> folder (which is currently in /usr/local/ecas/ui/modules). However,
> >> after
> >>>> restarting apache, I’m still getting 404 when I visit my locally
> hosted
> >> web
> >>>> application url: http://localhost/ecas/profile/login (screenshot
> >> below).
> >>>> The url to my balance web application http://localhost/ecas works
> fine
> >>>> however.
> >>>> <PastedGraphic-1.tiff>
> >>>> This issue seems to indicate that I haven’t successfully installed
> >>>> profile. Is there another step to installing profile other than
> copying
> >>>> pasting the profile folder into my web app’s module folder?
> >>>>
> >>>> I’m also wondering if it’s my apache conf file which I customized for
> >> the
> >>>> ECAS web application as well.
> >>>>
> >>>> Thanks so much for your guidance!
> >>>>
> >>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>> David L.
> >>>> Data Scientist
> >>>> Data Science and Technology
> >>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >>>>
> >>>>
> >>>>
> >>
> >>
>
>
Re: Balance profile module question
Posted by "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>.
Thanks Tom,
Indeed, after taking a more careful look at the apache errors/php errors, I realized that I had multiple copies of the profile login module which made it difficult to figure out which code was the actual code running.
One copy of my code was running with jpl's implementation of authentication while the other was Apache’s.
So I changed all of my code to point from Jpl’s into Apache’s and now the login works!
If there is a lesson that I learned, it’s not be a noob and look more carefully at all possible error logs…
Thanks guys for all your help! Now I have to go bother Chris Mattman specifically now.
Cheers,
David
> On Feb 23, 2016, at 3:33 PM, Tom Barber <to...@meteorite.bi> wrote:
>
> I'm not a PHP dev(you might have fathomed), but knowing what my brother
> does, just get it to dump them to the page and you will be able to see if
> its throwing up over the OODT code or lack of import or something.
>
> On Tue, Feb 23, 2016 at 11:30 PM, Liu, David (3902-Affiliate) <
> David.Liu@jpl.nasa.gov> wrote:
>
>> Sigh, silly me, that probably should have been the first or second thing I
>> should have been doing. I was just looking at apache error logs the whole
>> time.
>>
>> Thanks Tom!
>> David
>>
>>> On Feb 23, 2016, at 3:26 PM, Tom Barber <to...@meteorite.bi> wrote:
>>>
>>> Might be a silly question, but have you switched on the PHP error logs in
>>> php.ini to see what errors its spewing out?
>>>
>>> Tom
>>>
>>> On Tue, Feb 23, 2016 at 11:20 PM, Liu, David (3902-Affiliate) <
>>> David.Liu@jpl.nasa.gov> wrote:
>>>
>>>> Hi Andrew,
>>>>
>>>> I’m sending you this email through formalized channel instead of your
>>>> private email box!
>>>>
>>>> I tried following your instructions (
>>>> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4)
>>>> and was successful for the most part. However, when I got to the end
>>>> following copying pasting the profile module, I tried visiting the
>>>> http://balance-test/profile/login
>>>> and got the following error on my console:
>>>> The webpage shows up blank. However, http://balance-test works
>> perfectly
>>>> fine!
>>>>
>>>> I’ll continue to investigate but maybe it’s some issues with my local
>>>> environment.
>>>>
>>>> Kind Regards,
>>>> David
>>>>
>>>> On 2/12/16 11:00 AM, "Andrew Hart" <ah...@apache.org> wrote:
>>>>
>>>> Hi David,
>>>>
>>>> There are any number of possible reasons for this. Most of them,
>>>> unfortunately are environment specific and difficult to diagnose
>>>> remotely. I just created a new Balance site from scratch on a clean
>>>> machine, and was able to get to the point where the profile module
>>>> loaded correctly using just the copy-and-paste method from the
>>>> instructions, so I think there's something going on with your local
>>>> environment (mod-rewrite? permissions? difficult to say without more
>>>> information). I've compiled each step I took into a gist, linked below.
>>>> If you still have difficulties, please write again, and I'll be glad to
>>>> help you investigate further.
>>>>
>>>> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
>>>>
>>>> Best,
>>>> Andrew.
>>>>
>>>>
>>>>
>>>> On Feb 10, 2016, at 10:51 PM, Liu, David (398G-Affiliate) <
>>>> yuliu@jpl.nasa.gov> wrote:
>>>>
>>>> Good Evening Andrew Hart,
>>>>
>>>> I was referred by Chris Mattman from JPL to consult you regarding an
>>>> issue I’m having with the Balance profile module. I was wondering if you
>>>> can help me?
>>>>
>>>> I am currently working for JPL Data Sicence and Technology division. We
>>>> are trying to deploy the ECAS system which uses various OODT’s modules
>>>> including Balance profile module(
>>>> https://github.com/apache/oodt/tree/master/balance/modules/profile).
>> The
>>>> instructions to install the Balance profile module states that I should
>>>> copy paste the profile folder into my balance web application’s module
>>>> folder (which is currently in /usr/local/ecas/ui/modules). However,
>> after
>>>> restarting apache, I’m still getting 404 when I visit my locally hosted
>> web
>>>> application url: http://localhost/ecas/profile/login (screenshot
>> below).
>>>> The url to my balance web application http://localhost/ecas works fine
>>>> however.
>>>> <PastedGraphic-1.tiff>
>>>> This issue seems to indicate that I haven’t successfully installed
>>>> profile. Is there another step to installing profile other than copying
>>>> pasting the profile folder into my web app’s module folder?
>>>>
>>>> I’m also wondering if it’s my apache conf file which I customized for
>> the
>>>> ECAS web application as well.
>>>>
>>>> Thanks so much for your guidance!
>>>>
>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>> David L.
>>>> Data Scientist
>>>> Data Science and Technology
>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>
>>>>
>>>>
>>
>>
Re: Balance profile module question
Posted by Tom Barber <to...@meteorite.bi>.
I'm not a PHP dev(you might have fathomed), but knowing what my brother
does, just get it to dump them to the page and you will be able to see if
its throwing up over the OODT code or lack of import or something.
On Tue, Feb 23, 2016 at 11:30 PM, Liu, David (3902-Affiliate) <
David.Liu@jpl.nasa.gov> wrote:
> Sigh, silly me, that probably should have been the first or second thing I
> should have been doing. I was just looking at apache error logs the whole
> time.
>
> Thanks Tom!
> David
>
> > On Feb 23, 2016, at 3:26 PM, Tom Barber <to...@meteorite.bi> wrote:
> >
> > Might be a silly question, but have you switched on the PHP error logs in
> > php.ini to see what errors its spewing out?
> >
> > Tom
> >
> > On Tue, Feb 23, 2016 at 11:20 PM, Liu, David (3902-Affiliate) <
> > David.Liu@jpl.nasa.gov> wrote:
> >
> >> Hi Andrew,
> >>
> >> I’m sending you this email through formalized channel instead of your
> >> private email box!
> >>
> >> I tried following your instructions (
> >> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4)
> >> and was successful for the most part. However, when I got to the end
> >> following copying pasting the profile module, I tried visiting the
> >> http://balance-test/profile/login
> >> and got the following error on my console:
> >> The webpage shows up blank. However, http://balance-test works
> perfectly
> >> fine!
> >>
> >> I’ll continue to investigate but maybe it’s some issues with my local
> >> environment.
> >>
> >> Kind Regards,
> >> David
> >>
> >> On 2/12/16 11:00 AM, "Andrew Hart" <ah...@apache.org> wrote:
> >>
> >> Hi David,
> >>
> >> There are any number of possible reasons for this. Most of them,
> >> unfortunately are environment specific and difficult to diagnose
> >> remotely. I just created a new Balance site from scratch on a clean
> >> machine, and was able to get to the point where the profile module
> >> loaded correctly using just the copy-and-paste method from the
> >> instructions, so I think there's something going on with your local
> >> environment (mod-rewrite? permissions? difficult to say without more
> >> information). I've compiled each step I took into a gist, linked below.
> >> If you still have difficulties, please write again, and I'll be glad to
> >> help you investigate further.
> >>
> >> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
> >>
> >> Best,
> >> Andrew.
> >>
> >>
> >>
> >> On Feb 10, 2016, at 10:51 PM, Liu, David (398G-Affiliate) <
> >> yuliu@jpl.nasa.gov> wrote:
> >>
> >> Good Evening Andrew Hart,
> >>
> >> I was referred by Chris Mattman from JPL to consult you regarding an
> >> issue I’m having with the Balance profile module. I was wondering if you
> >> can help me?
> >>
> >> I am currently working for JPL Data Sicence and Technology division. We
> >> are trying to deploy the ECAS system which uses various OODT’s modules
> >> including Balance profile module(
> >> https://github.com/apache/oodt/tree/master/balance/modules/profile).
> The
> >> instructions to install the Balance profile module states that I should
> >> copy paste the profile folder into my balance web application’s module
> >> folder (which is currently in /usr/local/ecas/ui/modules). However,
> after
> >> restarting apache, I’m still getting 404 when I visit my locally hosted
> web
> >> application url: http://localhost/ecas/profile/login (screenshot
> below).
> >> The url to my balance web application http://localhost/ecas works fine
> >> however.
> >> <PastedGraphic-1.tiff>
> >> This issue seems to indicate that I haven’t successfully installed
> >> profile. Is there another step to installing profile other than copying
> >> pasting the profile folder into my web app’s module folder?
> >>
> >> I’m also wondering if it’s my apache conf file which I customized for
> the
> >> ECAS web application as well.
> >>
> >> Thanks so much for your guidance!
> >>
> >> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> David L.
> >> Data Scientist
> >> Data Science and Technology
> >> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> >>
> >>
> >>
>
>
Re: Balance profile module question
Posted by "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>.
Sigh, silly me, that probably should have been the first or second thing I should have been doing. I was just looking at apache error logs the whole time.
Thanks Tom!
David
> On Feb 23, 2016, at 3:26 PM, Tom Barber <to...@meteorite.bi> wrote:
>
> Might be a silly question, but have you switched on the PHP error logs in
> php.ini to see what errors its spewing out?
>
> Tom
>
> On Tue, Feb 23, 2016 at 11:20 PM, Liu, David (3902-Affiliate) <
> David.Liu@jpl.nasa.gov> wrote:
>
>> Hi Andrew,
>>
>> I’m sending you this email through formalized channel instead of your
>> private email box!
>>
>> I tried following your instructions (
>> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4)
>> and was successful for the most part. However, when I got to the end
>> following copying pasting the profile module, I tried visiting the
>> http://balance-test/profile/login
>> and got the following error on my console:
>> The webpage shows up blank. However, http://balance-test works perfectly
>> fine!
>>
>> I’ll continue to investigate but maybe it’s some issues with my local
>> environment.
>>
>> Kind Regards,
>> David
>>
>> On 2/12/16 11:00 AM, "Andrew Hart" <ah...@apache.org> wrote:
>>
>> Hi David,
>>
>> There are any number of possible reasons for this. Most of them,
>> unfortunately are environment specific and difficult to diagnose
>> remotely. I just created a new Balance site from scratch on a clean
>> machine, and was able to get to the point where the profile module
>> loaded correctly using just the copy-and-paste method from the
>> instructions, so I think there's something going on with your local
>> environment (mod-rewrite? permissions? difficult to say without more
>> information). I've compiled each step I took into a gist, linked below.
>> If you still have difficulties, please write again, and I'll be glad to
>> help you investigate further.
>>
>> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
>>
>> Best,
>> Andrew.
>>
>>
>>
>> On Feb 10, 2016, at 10:51 PM, Liu, David (398G-Affiliate) <
>> yuliu@jpl.nasa.gov> wrote:
>>
>> Good Evening Andrew Hart,
>>
>> I was referred by Chris Mattman from JPL to consult you regarding an
>> issue I’m having with the Balance profile module. I was wondering if you
>> can help me?
>>
>> I am currently working for JPL Data Sicence and Technology division. We
>> are trying to deploy the ECAS system which uses various OODT’s modules
>> including Balance profile module(
>> https://github.com/apache/oodt/tree/master/balance/modules/profile). The
>> instructions to install the Balance profile module states that I should
>> copy paste the profile folder into my balance web application’s module
>> folder (which is currently in /usr/local/ecas/ui/modules). However, after
>> restarting apache, I’m still getting 404 when I visit my locally hosted web
>> application url: http://localhost/ecas/profile/login (screenshot below).
>> The url to my balance web application http://localhost/ecas works fine
>> however.
>> <PastedGraphic-1.tiff>
>> This issue seems to indicate that I haven’t successfully installed
>> profile. Is there another step to installing profile other than copying
>> pasting the profile folder into my web app’s module folder?
>>
>> I’m also wondering if it’s my apache conf file which I customized for the
>> ECAS web application as well.
>>
>> Thanks so much for your guidance!
>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> David L.
>> Data Scientist
>> Data Science and Technology
>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>
>>
>>
Re: Balance profile module question
Posted by Tom Barber <to...@meteorite.bi>.
Might be a silly question, but have you switched on the PHP error logs in
php.ini to see what errors its spewing out?
Tom
On Tue, Feb 23, 2016 at 11:20 PM, Liu, David (3902-Affiliate) <
David.Liu@jpl.nasa.gov> wrote:
> Hi Andrew,
>
> I’m sending you this email through formalized channel instead of your
> private email box!
>
> I tried following your instructions (
> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4)
> and was successful for the most part. However, when I got to the end
> following copying pasting the profile module, I tried visiting the
> http://balance-test/profile/login
> and got the following error on my console:
> The webpage shows up blank. However, http://balance-test works perfectly
> fine!
>
> I’ll continue to investigate but maybe it’s some issues with my local
> environment.
>
> Kind Regards,
> David
>
> On 2/12/16 11:00 AM, "Andrew Hart" <ah...@apache.org> wrote:
>
> Hi David,
>
> There are any number of possible reasons for this. Most of them,
> unfortunately are environment specific and difficult to diagnose
> remotely. I just created a new Balance site from scratch on a clean
> machine, and was able to get to the point where the profile module
> loaded correctly using just the copy-and-paste method from the
> instructions, so I think there's something going on with your local
> environment (mod-rewrite? permissions? difficult to say without more
> information). I've compiled each step I took into a gist, linked below.
> If you still have difficulties, please write again, and I'll be glad to
> help you investigate further.
>
> https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
>
> Best,
> Andrew.
>
>
>
> On Feb 10, 2016, at 10:51 PM, Liu, David (398G-Affiliate) <
> yuliu@jpl.nasa.gov> wrote:
>
> Good Evening Andrew Hart,
>
> I was referred by Chris Mattman from JPL to consult you regarding an
> issue I’m having with the Balance profile module. I was wondering if you
> can help me?
>
> I am currently working for JPL Data Sicence and Technology division. We
> are trying to deploy the ECAS system which uses various OODT’s modules
> including Balance profile module(
> https://github.com/apache/oodt/tree/master/balance/modules/profile). The
> instructions to install the Balance profile module states that I should
> copy paste the profile folder into my balance web application’s module
> folder (which is currently in /usr/local/ecas/ui/modules). However, after
> restarting apache, I’m still getting 404 when I visit my locally hosted web
> application url: http://localhost/ecas/profile/login (screenshot below).
> The url to my balance web application http://localhost/ecas works fine
> however.
> <PastedGraphic-1.tiff>
> This issue seems to indicate that I haven’t successfully installed
> profile. Is there another step to installing profile other than copying
> pasting the profile folder into my web app’s module folder?
>
> I’m also wondering if it’s my apache conf file which I customized for the
> ECAS web application as well.
>
> Thanks so much for your guidance!
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> David L.
> Data Scientist
> Data Science and Technology
> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>
>
>
Re: Balance profile module question
Posted by "Liu, David (3902-Affiliate)" <Da...@jpl.nasa.gov>.
Hi Andrew,
I’m sending you this email through formalized channel instead of your private email box!
I tried following your instructions (https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4)
and was successful for the most part. However, when I got to the end following copying pasting the profile module, I tried visiting the http://balance-test/profile/login
and got the following error on my console:
[cid:3450CF69-E00B-44D6-B84B-E66789FA632D]
The webpage shows up blank. However, http://balance-test works perfectly fine!
I’ll continue to investigate but maybe it’s some issues with my local environment.
Kind Regards,
David
On 2/12/16 11:00 AM, "Andrew Hart" <ah...@apache.org>> wrote:
Hi David,
There are any number of possible reasons for this. Most of them,
unfortunately are environment specific and difficult to diagnose
remotely. I just created a new Balance site from scratch on a clean
machine, and was able to get to the point where the profile module
loaded correctly using just the copy-and-paste method from the
instructions, so I think there's something going on with your local
environment (mod-rewrite? permissions? difficult to say without more
information). I've compiled each step I took into a gist, linked below.
If you still have difficulties, please write again, and I'll be glad to
help you investigate further.
https://gist.github.com/andrewfhart/72f0e0ce0c54b76d0bf4
Best,
Andrew.
On Feb 10, 2016, at 10:51 PM, Liu, David (398G-Affiliate) <yu...@jpl.nasa.gov>> wrote:
Good Evening Andrew Hart,
I was referred by Chris Mattman from JPL to consult you regarding an issue I’m having with the Balance profile module. I was wondering if you can help me?
I am currently working for JPL Data Sicence and Technology division. We are trying to deploy the ECAS system which uses various OODT’s modules including Balance profile module(https://github.com/apache/oodt/tree/master/balance/modules/profile). The instructions to install the Balance profile module states that I should copy paste the profile folder into my balance web application’s module folder (which is currently in /usr/local/ecas/ui/modules). However, after restarting apache, I’m still getting 404 when I visit my locally hosted web application url: http://localhost/ecas/profile/login (screenshot below). The url to my balance web application http://localhost/ecas works fine however.
<PastedGraphic-1.tiff>
This issue seems to indicate that I haven’t successfully installed profile. Is there another step to installing profile other than copying pasting the profile folder into my web app’s module folder?
I’m also wondering if it’s my apache conf file which I customized for the ECAS web application as well.
Thanks so much for your guidance!
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
David L.
Data Scientist
Data Science and Technology
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA