You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Adam Witwicki <aw...@oakfordis.com> on 2019/09/13 12:23:31 UTC
System Capacity Limits
Hello,
Going back to "unable to start MV due to insufficient capacity" errors
Is there a way to turn these off as I can overprovision for "CPU" but not "# of CPU Cores"?
CS ver 4.11.0.0
Thanks
Adam
Disclaimer Notice:
This email has been sent by Oakford Technology Limited, while we have checked this e-mail and any attachments for viruses, we can not guarantee that they are virus-free. You must therefore take full responsibility for virus checking.
This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited.
Internet communications are not always secure and therefore Oakford Technology Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Oakford Technology Limited.
Registered address: Oakford Technology Limited, The Manor House, Potterne, Wiltshire. SN10 5PN.
Registered in England and Wales No. 5971519
RE: System Capacity Limits
Posted by Adam Witwicki <aw...@oakfordis.com>.
I have not re tested
Thanks
Adam
-----Original Message-----
From: Andrija Panic <an...@gmail.com>
Sent: 17 September 2019 10:05
To: users <us...@cloudstack.apache.org>
Subject: Re: System Capacity Limits
** This mail originated from OUTSIDE the Oakford corporate network. Treat hyperlinks and attachments in this email with caution. **
Adam,
Any conclusions, did you find something in the log?
On Sat, Sep 14, 2019, 23:54 Sven Vogel <S....@ewerk.com> wrote:
> Hi Adam,
>
> Take a look here. Maybe it helps.
>
> https://www.slideshare.net/AlexTian/cloud-stack-troubleshooting
>
> Cheers,
>
> Sven
>
> Von meinem iPhone gesendet
>
>
> __
>
> Sven Vogel
> Teamlead Platform
>
> EWERK DIGITAL GmbH
> Brühl 24, D-04109 Leipzig
> P +49 341 42649 - 99
> F +49 341 42649 - 98
> S.Vogel@ewerk.com
> www.ewerk.com
>
> Geschäftsführer:
> Dr. Erik Wende, Hendrik Schubert, Frank Richter
> Registergericht: Leipzig HRB 9065
>
> Zertifiziert nach:
> ISO/IEC 27001:2013
> DIN EN ISO 9001:2015
> DIN ISO/IEC 20000-1:2011
>
> EWERK-Blog | LinkedIn | Xing | Twitter | Facebook
>
> Auskünfte und Angebote per Mail sind freibleibend und unverbindlich.
>
> Disclaimer Privacy:
> Der Inhalt dieser E-Mail (einschließlich etwaiger beigefügter Dateien)
> ist vertraulich und nur für den Empfänger bestimmt. Sollten Sie nicht
> der bestimmungsgemäße Empfänger sein, ist Ihnen jegliche Offenlegung,
> Vervielfältigung, Weitergabe oder Nutzung des Inhalts untersagt. Bitte
> informieren Sie in diesem Fall unverzüglich den Absender und löschen
> Sie die E-Mail (einschließlich etwaiger beigefügter Dateien) von Ihrem System.
> Vielen Dank.
>
> The contents of this e-mail (including any attachments) are
> confidential and may be legally privileged. If you are not the
> intended recipient of this e-mail, any disclosure, copying,
> distribution or use of its contents is strictly prohibited, and you
> should please notify the sender immediately and then delete it (including any attachments) from your system. Thank you.
> > Am 13.09.2019 um 19:06 schrieb Andrija Panic <an...@gmail.com>:
> >
> > Hi Adam,
> >
> > That insufficient capacity exception message has probably nothing to
> > do with the number of CPU cores (and most of the time with anything
> > capacity-related, it's just that we are lazy to pass the real error
> > to as the API reaponse...) but is a general message that can mean
> > 100 different things.
> >
> > The real reason you'll only find in the mgmt logs.
> >
> > And, I have tested 4.11.2 and 4.13/master - number of CPU cores is
> > NOT taken into the consideration/math - with or without
> > overprovisioning (I have cpu.overprovisioning.factor set to 2. 0 and
> > was able to provision
> 250%
> > of my CPU core).
> >
> > Dig the logs and see what is really the exception.
> >
> > Best,
> > Andrija
> >
> >
> >> On Fri, Sep 13, 2019, 05:23 Adam Witwicki <aw...@oakfordis.com>
> wrote:
> >>
> >> Hello,
> >>
> >> Going back to "unable to start MV due to insufficient capacity"
> >> errors Is there a way to turn these off as I can overprovision for
> >> "CPU" but
> not
> >> "# of CPU Cores"?
> >>
> >> CS ver 4.11.0.0
> >>
> >> Thanks
> >>
> >> Adam
> >>
> >>
> >> Disclaimer Notice:
> >> This email has been sent by Oakford Technology Limited, while we
> >> have checked this e-mail and any attachments for viruses, we can
> >> not
> guarantee
> >> that they are virus-free. You must therefore take full
> >> responsibility
> for
> >> virus checking.
> >> This message and any attachments are confidential and should only
> >> be
> read
> >> by those to whom they are addressed. If you are not the intended
> recipient,
> >> please contact us, delete the message from your computer and
> >> destroy any copies. Any distribution or copying without our prior
> >> permission is prohibited.
> >> Internet communications are not always secure and therefore Oakford
> >> Technology Limited does not accept legal responsibility for this
> message.
> >> The recipient is responsible for verifying its authenticity before
> acting
> >> on the contents. Any views or opinions presented are solely those
> >> of the author and do not necessarily represent those of Oakford
> >> Technology
> Limited.
> >> Registered address: Oakford Technology Limited, The Manor House,
> Potterne,
> >> Wiltshire. SN10 5PN.
> >> Registered in England and Wales No. 5971519
> >>
> >>
>
Disclaimer Notice:
This email has been sent by Oakford Technology Limited, while we have checked this e-mail and any attachments for viruses, we can not guarantee that they are virus-free. You must therefore take full responsibility for virus checking.
This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited.
Internet communications are not always secure and therefore Oakford Technology Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Oakford Technology Limited.
Registered address: Oakford Technology Limited, The Manor House, Potterne, Wiltshire. SN10 5PN.
Registered in England and Wales No. 5971519
Re: System Capacity Limits
Posted by Andrija Panic <an...@gmail.com>.
Adam,
Any conclusions, did you find something in the log?
On Sat, Sep 14, 2019, 23:54 Sven Vogel <S....@ewerk.com> wrote:
> Hi Adam,
>
> Take a look here. Maybe it helps.
>
> https://www.slideshare.net/AlexTian/cloud-stack-troubleshooting
>
> Cheers,
>
> Sven
>
> Von meinem iPhone gesendet
>
>
> __
>
> Sven Vogel
> Teamlead Platform
>
> EWERK DIGITAL GmbH
> Brühl 24, D-04109 Leipzig
> P +49 341 42649 - 99
> F +49 341 42649 - 98
> S.Vogel@ewerk.com
> www.ewerk.com
>
> Geschäftsführer:
> Dr. Erik Wende, Hendrik Schubert, Frank Richter
> Registergericht: Leipzig HRB 9065
>
> Zertifiziert nach:
> ISO/IEC 27001:2013
> DIN EN ISO 9001:2015
> DIN ISO/IEC 20000-1:2011
>
> EWERK-Blog | LinkedIn | Xing | Twitter | Facebook
>
> Auskünfte und Angebote per Mail sind freibleibend und unverbindlich.
>
> Disclaimer Privacy:
> Der Inhalt dieser E-Mail (einschließlich etwaiger beigefügter Dateien) ist
> vertraulich und nur für den Empfänger bestimmt. Sollten Sie nicht der
> bestimmungsgemäße Empfänger sein, ist Ihnen jegliche Offenlegung,
> Vervielfältigung, Weitergabe oder Nutzung des Inhalts untersagt. Bitte
> informieren Sie in diesem Fall unverzüglich den Absender und löschen Sie
> die E-Mail (einschließlich etwaiger beigefügter Dateien) von Ihrem System.
> Vielen Dank.
>
> The contents of this e-mail (including any attachments) are confidential
> and may be legally privileged. If you are not the intended recipient of
> this e-mail, any disclosure, copying, distribution or use of its contents
> is strictly prohibited, and you should please notify the sender immediately
> and then delete it (including any attachments) from your system. Thank you.
> > Am 13.09.2019 um 19:06 schrieb Andrija Panic <an...@gmail.com>:
> >
> > Hi Adam,
> >
> > That insufficient capacity exception message has probably nothing to do
> > with the number of CPU cores (and most of the time with anything
> > capacity-related, it's just that we are lazy to pass the real error to as
> > the API reaponse...) but is a general message that can mean 100 different
> > things.
> >
> > The real reason you'll only find in the mgmt logs.
> >
> > And, I have tested 4.11.2 and 4.13/master - number of CPU cores is NOT
> > taken into the consideration/math - with or without overprovisioning (I
> > have cpu.overprovisioning.factor set to 2. 0 and was able to provision
> 250%
> > of my CPU core).
> >
> > Dig the logs and see what is really the exception.
> >
> > Best,
> > Andrija
> >
> >
> >> On Fri, Sep 13, 2019, 05:23 Adam Witwicki <aw...@oakfordis.com>
> wrote:
> >>
> >> Hello,
> >>
> >> Going back to "unable to start MV due to insufficient capacity" errors
> >> Is there a way to turn these off as I can overprovision for "CPU" but
> not
> >> "# of CPU Cores"?
> >>
> >> CS ver 4.11.0.0
> >>
> >> Thanks
> >>
> >> Adam
> >>
> >>
> >> Disclaimer Notice:
> >> This email has been sent by Oakford Technology Limited, while we have
> >> checked this e-mail and any attachments for viruses, we can not
> guarantee
> >> that they are virus-free. You must therefore take full responsibility
> for
> >> virus checking.
> >> This message and any attachments are confidential and should only be
> read
> >> by those to whom they are addressed. If you are not the intended
> recipient,
> >> please contact us, delete the message from your computer and destroy any
> >> copies. Any distribution or copying without our prior permission is
> >> prohibited.
> >> Internet communications are not always secure and therefore Oakford
> >> Technology Limited does not accept legal responsibility for this
> message.
> >> The recipient is responsible for verifying its authenticity before
> acting
> >> on the contents. Any views or opinions presented are solely those of the
> >> author and do not necessarily represent those of Oakford Technology
> Limited.
> >> Registered address: Oakford Technology Limited, The Manor House,
> Potterne,
> >> Wiltshire. SN10 5PN.
> >> Registered in England and Wales No. 5971519
> >>
> >>
>
Re: System Capacity Limits
Posted by Sven Vogel <S....@ewerk.com>.
Hi Adam,
Take a look here. Maybe it helps.
https://www.slideshare.net/AlexTian/cloud-stack-troubleshooting
Cheers,
Sven
Von meinem iPhone gesendet
__
Sven Vogel
Teamlead Platform
EWERK DIGITAL GmbH
Brühl 24, D-04109 Leipzig
P +49 341 42649 - 99
F +49 341 42649 - 98
S.Vogel@ewerk.com
www.ewerk.com
Geschäftsführer:
Dr. Erik Wende, Hendrik Schubert, Frank Richter
Registergericht: Leipzig HRB 9065
Zertifiziert nach:
ISO/IEC 27001:2013
DIN EN ISO 9001:2015
DIN ISO/IEC 20000-1:2011
EWERK-Blog | LinkedIn | Xing | Twitter | Facebook
Auskünfte und Angebote per Mail sind freibleibend und unverbindlich.
Disclaimer Privacy:
Der Inhalt dieser E-Mail (einschließlich etwaiger beigefügter Dateien) ist vertraulich und nur für den Empfänger bestimmt. Sollten Sie nicht der bestimmungsgemäße Empfänger sein, ist Ihnen jegliche Offenlegung, Vervielfältigung, Weitergabe oder Nutzung des Inhalts untersagt. Bitte informieren Sie in diesem Fall unverzüglich den Absender und löschen Sie die E-Mail (einschließlich etwaiger beigefügter Dateien) von Ihrem System. Vielen Dank.
The contents of this e-mail (including any attachments) are confidential and may be legally privileged. If you are not the intended recipient of this e-mail, any disclosure, copying, distribution or use of its contents is strictly prohibited, and you should please notify the sender immediately and then delete it (including any attachments) from your system. Thank you.
> Am 13.09.2019 um 19:06 schrieb Andrija Panic <an...@gmail.com>:
>
> Hi Adam,
>
> That insufficient capacity exception message has probably nothing to do
> with the number of CPU cores (and most of the time with anything
> capacity-related, it's just that we are lazy to pass the real error to as
> the API reaponse...) but is a general message that can mean 100 different
> things.
>
> The real reason you'll only find in the mgmt logs.
>
> And, I have tested 4.11.2 and 4.13/master - number of CPU cores is NOT
> taken into the consideration/math - with or without overprovisioning (I
> have cpu.overprovisioning.factor set to 2. 0 and was able to provision 250%
> of my CPU core).
>
> Dig the logs and see what is really the exception.
>
> Best,
> Andrija
>
>
>> On Fri, Sep 13, 2019, 05:23 Adam Witwicki <aw...@oakfordis.com> wrote:
>>
>> Hello,
>>
>> Going back to "unable to start MV due to insufficient capacity" errors
>> Is there a way to turn these off as I can overprovision for "CPU" but not
>> "# of CPU Cores"?
>>
>> CS ver 4.11.0.0
>>
>> Thanks
>>
>> Adam
>>
>>
>> Disclaimer Notice:
>> This email has been sent by Oakford Technology Limited, while we have
>> checked this e-mail and any attachments for viruses, we can not guarantee
>> that they are virus-free. You must therefore take full responsibility for
>> virus checking.
>> This message and any attachments are confidential and should only be read
>> by those to whom they are addressed. If you are not the intended recipient,
>> please contact us, delete the message from your computer and destroy any
>> copies. Any distribution or copying without our prior permission is
>> prohibited.
>> Internet communications are not always secure and therefore Oakford
>> Technology Limited does not accept legal responsibility for this message.
>> The recipient is responsible for verifying its authenticity before acting
>> on the contents. Any views or opinions presented are solely those of the
>> author and do not necessarily represent those of Oakford Technology Limited.
>> Registered address: Oakford Technology Limited, The Manor House, Potterne,
>> Wiltshire. SN10 5PN.
>> Registered in England and Wales No. 5971519
>>
>>
Re: System Capacity Limits
Posted by Andrija Panic <an...@gmail.com>.
Hi Adam,
That insufficient capacity exception message has probably nothing to do
with the number of CPU cores (and most of the time with anything
capacity-related, it's just that we are lazy to pass the real error to as
the API reaponse...) but is a general message that can mean 100 different
things.
The real reason you'll only find in the mgmt logs.
And, I have tested 4.11.2 and 4.13/master - number of CPU cores is NOT
taken into the consideration/math - with or without overprovisioning (I
have cpu.overprovisioning.factor set to 2. 0 and was able to provision 250%
of my CPU core).
Dig the logs and see what is really the exception.
Best,
Andrija
On Fri, Sep 13, 2019, 05:23 Adam Witwicki <aw...@oakfordis.com> wrote:
> Hello,
>
> Going back to "unable to start MV due to insufficient capacity" errors
> Is there a way to turn these off as I can overprovision for "CPU" but not
> "# of CPU Cores"?
>
> CS ver 4.11.0.0
>
> Thanks
>
> Adam
>
>
> Disclaimer Notice:
> This email has been sent by Oakford Technology Limited, while we have
> checked this e-mail and any attachments for viruses, we can not guarantee
> that they are virus-free. You must therefore take full responsibility for
> virus checking.
> This message and any attachments are confidential and should only be read
> by those to whom they are addressed. If you are not the intended recipient,
> please contact us, delete the message from your computer and destroy any
> copies. Any distribution or copying without our prior permission is
> prohibited.
> Internet communications are not always secure and therefore Oakford
> Technology Limited does not accept legal responsibility for this message.
> The recipient is responsible for verifying its authenticity before acting
> on the contents. Any views or opinions presented are solely those of the
> author and do not necessarily represent those of Oakford Technology Limited.
> Registered address: Oakford Technology Limited, The Manor House, Potterne,
> Wiltshire. SN10 5PN.
> Registered in England and Wales No. 5971519
>
>