You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@accumulo.apache.org by Pete Carlson <pg...@gmail.com> on 2013/09/10 21:54:01 UTC
Can't get Accumulo 1.5 monitor interface to start in my browser
Hi,
I just set up a free standing Accumulo 1.5 instance on my linux VM, and
when I run bin/start-all.sh it starts up accumulo, and also connects to my
free standing Zookeeper and HDFS instances .
However, when I try to pull up the Accumulo master in my FireFox browser
(Firefox ESR 10.0.12) i.e., http://accumulomaster:50095/status for health
and monitoring, I get an unable to connect error.
I also tried running ./generate_monitor_certificate.sh and copied those
properties in my accumulo-site.xml but I still get the same result.
Is there something else I need to configure?
Regards,
Pete
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
Actually I take that back... I didn't realize my VM's port closed on me..
I re-opened the VM port using nc -l 50095, and I can send messages to my VM
via telnet on my Win 7 client.
Regards,
Pete
On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com> wrote:
> All,
>
> Just to clarify I have a Centos VM running on my Windows 7 box, and I have
> Accumulo, Hadoop, and Zookeeper running on it standalone. I was trying to
> open the Accumulo monitor within that VM and it failed. However I can open
> the Hadoop Namenode and Jobtracker web interfaces in my browser just fine.
>
> Brendan, I was able to connect to my VM using netcat on port 50095.
>
> However, when I try to telnet to that port on my Win7 with telnet using my
> VM's ip address and port i.e.,
>
> telnet <IP address of vm> 50095
>
> I get a message: ....Could not open connection to the host, on port
> 50095: Connect failed.
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bh...@gmail.com>wrote:
>
>> Can you try to connect to your VM using netcat on port 50095?
>>
>> On VM:
>> nc -l 50095
>>
>> On Client:
>> nc <ip-address of VM> 50095
>>
>> Then type "test" or something on your Client machine. The message
>> should be sent to your VM.
>>
>> This will help to test the connectivity of the two machines over port
>> 50095
>>
>>
>> Brendan
>>
>>
>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>>
>>> Are you certain the monitor is running and was able to bind to the port?
>>> Please check the monitor logs for any errors.
>>>
>>>
>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> John,
>>>>
>>>> I don't see port 50095 in use in the VM. When I become root and type
>>>> lsof -i -P | grep :50095 I don't get anything back.
>>>>
>>>> Any suggestions on how to get the port running? I tried editing the
>>>> iptables with the following command:
>>>>
>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>
>>>> and then I typed
>>>>
>>>> service iptables save
>>>>
>>>> to save my iptable changes, but when I restarted my VM I didn't see any
>>>> difference.
>>>>
>>>> Regards,
>>>>
>>>> Pete
>>>>
>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>> www.facebook.com/oqwcrafts
>>>>
>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>> is, check the monitor logs and see what's up.
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> Hi John,
>>>>>>
>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried modifying
>>>>>> the IP tables to make it opened, and restarted my VM but when I run the
>>>>>> lsof -i command I don't see port 50095 listed.
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>> www.facebook.com/oqwcrafts
>>>>>>
>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>>>>>>
>>>>>>> Do you have the port open to your VM?
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux VM,
>>>>>>>> and when I run bin/start-all.sh it starts up accumulo, and also connects to
>>>>>>>> my free standing Zookeeper and HDFS instances .
>>>>>>>>
>>>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>> http://accumulomaster:50095/status for health and monitoring, I
>>>>>>>> get an unable to connect error.
>>>>>>>>
>>>>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>>>>
>>>>>>>> Is there something else I need to configure?
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Eric Newton <er...@gmail.com>.
Yes, fix your swappiness setting.
Also, put the external address of your VM into conf/monitor
-Eric
On Wed, Sep 11, 2013 at 2:10 PM, John Vines <vi...@apache.org> wrote:
> Check the tserver logs.
>
>
> On Wed, Sep 11, 2013 at 2:08 PM, Pete Carlson <pg...@gmail.com> wrote:
>
>> How do I determine if the rest of Accumulo is up and running since I
>> can't use the monitor?
>>
>> Inside the monitor logs I see messages that it connected to Hadoop and
>> Zookeeper, but then later on I see this message stating there are no tablet
>> servers:
>>
>> 2013-09-11 11:39:29,199 [server.Accumulo] WARN : System swappiness
>> setting is greater than ten (60) which can cause time-sensitive operations
>> to be delayed. Accumulo is time sensitive because it needs to maintain
>> distributed lock agreement.
>> 2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
>> tracer:localhost.localdomain There are no tablet servers: check that
>> zookeeper and accumulo are running.
>>
>> And when I log in to the accumulo shell I get the warning: There are no
>> tablet servers: check that zookeeper and accumulo are running.
>>
>> Could the system swappiness setting of 60 be causing my issue?
>>
>> Regards,
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vi...@apache.org> wrote:
>>
>>> Is the rest of Accumulo up and running? And is that the only type of
>>> error in the Monitor logs?
>>>
>>>
>>> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> Ok, I deleted /accumulo out of hdfs, initialized accumulo, and
>>>> re-started Accumulo. I still can't see the monitor IN my VM browser. I
>>>> still get the same Monitor info message in the logs.
>>>>
>>>> Pete
>>>>
>>>> On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> You need to delete the /accumulo directory out of hdfs
>>>>>
>>>>>
>>>>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> I removed the monitor certificates as suggested, and I no longer get
>>>>>> any messages in the monitor_localhost.err file.
>>>>>>
>>>>>> When I look in the monitor_localhost.localdomain.log file and saw the
>>>>>> following INFO/Exception message:
>>>>>>
>>>>>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>>>>>> problem reports
>>>>>> java.lang.RuntimeException:
>>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>>>>>> at
>>>>>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>>>>>> at
>>>>>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>>>>>> at
>>>>>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>>>>>> at
>>>>>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>>>>>> at
>>>>>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>>>>>> at java.lang.Thread.run(Thread.java:724)
>>>>>> Caused by:
>>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>>>>>> ... 6 more
>>>>>>
>>>>>> I was thinking this was related to the fact I didn't yet have Thrift
>>>>>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>>>>>> installed. I saved off my config files, blew away the accumulo directory
>>>>>> and extracted it again from the tar.gz and copied over my conf files.
>>>>>>
>>>>>> However, when I run the accumulo-1.5.0/bin/accumulo init command
>>>>>> again it gives me the following error:
>>>>>>
>>>>>> [util.Initialize] FATAL: It appears this location was previously
>>>>>> initialized, exiting ...
>>>>>>
>>>>>> I can still start Accumulo like before with the bin/start-all.sh
>>>>>> command but the Accumulo monitor still doesn't work IN my VM.
>>>>>>
>>>>>> Any other ideas to try?
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org>wrote:
>>>>>>
>>>>>>> Either try rerunning the monitor certificates or remove the portion
>>>>>>> from your accumulo-site that defines use of the certificate. I suggest the
>>>>>>> latter simply to remove variables at hand.
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> John,
>>>>>>>>
>>>>>>>> What is the monitor process called so I can verify its running? I
>>>>>>>> did look at the thread monitor logs, and under monitor_localhost.err it
>>>>>>>> gives a FileNotFoundException because it can't find the keystore.jks under
>>>>>>>> accumulo-1.5.0/conf/
>>>>>>>>
>>>>>>>> I would have thought when I ran ./generate_monitor_certificate.sh
>>>>>>>> it would have created this.
>>>>>>>>
>>>>>>>> I was trying to run the monitor in a browser IN the VM. Thats how
>>>>>>>> I found this problem.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org>wrote:
>>>>>>>>
>>>>>>>>> Again, please check to make sure the monitor process is running
>>>>>>>>> and it's not reporting any errors in it's logs.
>>>>>>>>>
>>>>>>>>> If you can verify that (and please verify that first), try
>>>>>>>>> accessing the monitor in a browser IN the VM.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <
>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> All,
>>>>>>>>>>
>>>>>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box,
>>>>>>>>>> and I have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>>>>>> just fine.
>>>>>>>>>>
>>>>>>>>>> Brendan, I was able to connect to my VM using netcat on port
>>>>>>>>>> 50095.
>>>>>>>>>>
>>>>>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>>>>>> using my VM's ip address and port i.e.,
>>>>>>>>>>
>>>>>>>>>> telnet <IP address of vm> 50095
>>>>>>>>>>
>>>>>>>>>> I get a message: ....Could not open connection to the host, on
>>>>>>>>>> port 50095: Connect failed.
>>>>>>>>>>
>>>>>>>>>> Pete
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>>>>>> bheussler@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>>>>>
>>>>>>>>>>> On VM:
>>>>>>>>>>> nc -l 50095
>>>>>>>>>>>
>>>>>>>>>>> On Client:
>>>>>>>>>>> nc <ip-address of VM> 50095
>>>>>>>>>>>
>>>>>>>>>>> Then type "test" or something on your Client machine. The
>>>>>>>>>>> message should be sent to your VM.
>>>>>>>>>>>
>>>>>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>>>>>> port 50095
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Brendan
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Are you certain the monitor is running and was able to bind to
>>>>>>>>>>>> the port? Please check the monitor logs for any errors.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <
>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> John,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I don't see port 50095 in use in the VM. When I become root
>>>>>>>>>>>>> and type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Any suggestions on how to get the port running? I tried
>>>>>>>>>>>>> editing the iptables with the following command:
>>>>>>>>>>>>>
>>>>>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>>>>>
>>>>>>>>>>>>> and then I typed
>>>>>>>>>>>>>
>>>>>>>>>>>>> service iptables save
>>>>>>>>>>>>>
>>>>>>>>>>>>> to save my iptable changes, but when I restarted my VM I
>>>>>>>>>>>>> didn't see any difference.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>
>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>
>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box?
>>>>>>>>>>>>>> You should only see it in use in the VM. If not, make sure it's running. If
>>>>>>>>>>>>>> it is, check the monitor logs and see what's up.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <
>>>>>>>>>>>>>>> vines@apache.org> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>>>>>> http://accumulomaster:50095/status for health and
>>>>>>>>>>>>>>>>> monitoring, I get an unable to connect error.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>>>>>> result.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Check the tserver logs.
On Wed, Sep 11, 2013 at 2:08 PM, Pete Carlson <pg...@gmail.com> wrote:
> How do I determine if the rest of Accumulo is up and running since I can't
> use the monitor?
>
> Inside the monitor logs I see messages that it connected to Hadoop and
> Zookeeper, but then later on I see this message stating there are no tablet
> servers:
>
> 2013-09-11 11:39:29,199 [server.Accumulo] WARN : System swappiness
> setting is greater than ten (60) which can cause time-sensitive operations
> to be delayed. Accumulo is time sensitive because it needs to maintain
> distributed lock agreement.
> 2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
> tracer:localhost.localdomain There are no tablet servers: check that
> zookeeper and accumulo are running.
>
> And when I log in to the accumulo shell I get the warning: There are no
> tablet servers: check that zookeeper and accumulo are running.
>
> Could the system swappiness setting of 60 be causing my issue?
>
> Regards,
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vi...@apache.org> wrote:
>
>> Is the rest of Accumulo up and running? And is that the only type of
>> error in the Monitor logs?
>>
>>
>> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> Ok, I deleted /accumulo out of hdfs, initialized accumulo, and
>>> re-started Accumulo. I still can't see the monitor IN my VM browser. I
>>> still get the same Monitor info message in the logs.
>>>
>>> Pete
>>>
>>> On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
>>>
>>>> You need to delete the /accumulo directory out of hdfs
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> I removed the monitor certificates as suggested, and I no longer get
>>>>> any messages in the monitor_localhost.err file.
>>>>>
>>>>> When I look in the monitor_localhost.localdomain.log file and saw the
>>>>> following INFO/Exception message:
>>>>>
>>>>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>>>>> problem reports
>>>>> java.lang.RuntimeException:
>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>>>>> at
>>>>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>>>>> at
>>>>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>>>>> at
>>>>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>>>>> at
>>>>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>>>>> at
>>>>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>>>>> at java.lang.Thread.run(Thread.java:724)
>>>>> Caused by:
>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>>>>> ... 6 more
>>>>>
>>>>> I was thinking this was related to the fact I didn't yet have Thrift
>>>>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>>>>> installed. I saved off my config files, blew away the accumulo directory
>>>>> and extracted it again from the tar.gz and copied over my conf files.
>>>>>
>>>>> However, when I run the accumulo-1.5.0/bin/accumulo init command again
>>>>> it gives me the following error:
>>>>>
>>>>> [util.Initialize] FATAL: It appears this location was previously
>>>>> initialized, exiting ...
>>>>>
>>>>> I can still start Accumulo like before with the bin/start-all.sh
>>>>> command but the Accumulo monitor still doesn't work IN my VM.
>>>>>
>>>>> Any other ideas to try?
>>>>>
>>>>> Pete
>>>>>
>>>>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
>>>>>
>>>>>> Either try rerunning the monitor certificates or remove the portion
>>>>>> from your accumulo-site that defines use of the certificate. I suggest the
>>>>>> latter simply to remove variables at hand.
>>>>>>
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>
>>>>>>> John,
>>>>>>>
>>>>>>> What is the monitor process called so I can verify its running? I
>>>>>>> did look at the thread monitor logs, and under monitor_localhost.err it
>>>>>>> gives a FileNotFoundException because it can't find the keystore.jks under
>>>>>>> accumulo-1.5.0/conf/
>>>>>>>
>>>>>>> I would have thought when I ran ./generate_monitor_certificate.sh it
>>>>>>> would have created this.
>>>>>>>
>>>>>>> I was trying to run the monitor in a browser IN the VM. Thats how I
>>>>>>> found this problem.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org>wrote:
>>>>>>>
>>>>>>>> Again, please check to make sure the monitor process is running and
>>>>>>>> it's not reporting any errors in it's logs.
>>>>>>>>
>>>>>>>> If you can verify that (and please verify that first), try
>>>>>>>> accessing the monitor in a browser IN the VM.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pgcarlson@gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> All,
>>>>>>>>>
>>>>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box,
>>>>>>>>> and I have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>>>>> just fine.
>>>>>>>>>
>>>>>>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>>>>>>
>>>>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>>>>> using my VM's ip address and port i.e.,
>>>>>>>>>
>>>>>>>>> telnet <IP address of vm> 50095
>>>>>>>>>
>>>>>>>>> I get a message: ....Could not open connection to the host, on
>>>>>>>>> port 50095: Connect failed.
>>>>>>>>>
>>>>>>>>> Pete
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>>>>> bheussler@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>>>>
>>>>>>>>>> On VM:
>>>>>>>>>> nc -l 50095
>>>>>>>>>>
>>>>>>>>>> On Client:
>>>>>>>>>> nc <ip-address of VM> 50095
>>>>>>>>>>
>>>>>>>>>> Then type "test" or something on your Client machine. The
>>>>>>>>>> message should be sent to your VM.
>>>>>>>>>>
>>>>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>>>>> port 50095
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Brendan
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>
>>>>>>>>>>> Are you certain the monitor is running and was able to bind to
>>>>>>>>>>> the port? Please check the monitor logs for any errors.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <
>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> John,
>>>>>>>>>>>>
>>>>>>>>>>>> I don't see port 50095 in use in the VM. When I become root
>>>>>>>>>>>> and type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>>>>
>>>>>>>>>>>> Any suggestions on how to get the port running? I tried
>>>>>>>>>>>> editing the iptables with the following command:
>>>>>>>>>>>>
>>>>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>>>>
>>>>>>>>>>>> and then I typed
>>>>>>>>>>>>
>>>>>>>>>>>> service iptables save
>>>>>>>>>>>>
>>>>>>>>>>>> to save my iptable changes, but when I restarted my VM I didn't
>>>>>>>>>>>> see any difference.
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Pete
>>>>>>>>>>>>
>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>
>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box?
>>>>>>>>>>>>> You should only see it in use in the VM. If not, make sure it's running. If
>>>>>>>>>>>>> it is, check the monitor logs and see what's up.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vines@apache.org
>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>>>>> http://accumulomaster:50095/status for health and
>>>>>>>>>>>>>>>> monitoring, I get an unable to connect error.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>>>>> result.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
Josh,
I think this would be good info to include in the user guide, perhaps as
steps to configure the monitor (ie around the section where it talks about
the monitor url). Another useful area for the info would be under
configuration (where the user guide talks about setting the monitor,
master, slave settings, etc under the accumulo /conf directory.
Thanks,
Pete
On Sep 11, 2013 7:52 PM, "Josh Elser" <jo...@gmail.com> wrote:
> Pete,
>
> I assume you did some leg-work before hitting up the mailing list... any
> recommendations on where you think might make sense on encapsulating some
> of this information?
>
> FAQ format? Rolled into documentation (user/admin guide)? Other?
>
> - josh
>
> On 09/11/2013 04:17 PM, Pete Carlson wrote:
>
>> All,
>>
>> I resolved the issue. Per Eric's suggestion I changed my swappiness
>> setting down to 10, and also disabled all IPV6 stuff on my VM. Once I did
>> this and changed the IP address of my monitor to 127.0.0.1 my monitor
>> started working.
>>
>> Thanks guys. :-)
>>
>> Regards,
>>
>> Pete
>>
>> On Wed, Sep 11, 2013 at 2:12 PM, John Vines <vines@apache.org <mailto:
>> vines@apache.org>> wrote:
>>
>> Furthermore, tservers being down shouldn't prevent the monitor
>> page from coming up at all, so check for any other relevant
>> messages in of the monitor's logs.
>>
>>
>> On Wed, Sep 11, 2013 at 2:08 PM, Pete Carlson <pgcarlson@gmail.com
>> <ma...@gmail.com>> wrote:
>>
>> How do I determine if the rest of Accumulo is up and running
>> since I can't use the monitor?
>>
>> Inside the monitor logs I see messages that it connected to
>> Hadoop and Zookeeper, but then later on I see this message
>> stating there are no tablet servers:
>>
>> 2013-09-11 11:39:29,199 [server.Accumulo] WARN : System
>> swappiness setting is greater than ten (60) which can cause
>> time-sensitive operations to be delayed. Accumulo is time
>> sensitive because it needs to maintain distributed lock agreement.
>> 2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
>> tracer:localhost.localdomain There are no tablet servers:
>> check that zookeeper and accumulo are running.
>>
>> And when I log in to the accumulo shell I get the warning:
>> There are no tablet servers: check that zookeeper and accumulo
>> are running.
>>
>> Could the system swappiness setting of 60 be causing my issue?
>>
>> Regards,
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vines@apache.org
>> <ma...@apache.org>> wrote:
>>
>> Is the rest of Accumulo up and running? And is that the
>> only type of error in the Monitor logs?
>>
>>
>> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson
>> <pgcarlson@gmail.com <ma...@gmail.com>> wrote:
>>
>> Ok, I deleted /accumulo out of hdfs, initialized
>> accumulo, and re-started Accumulo. I still can't see
>> the monitor IN my VM browser. I still get the same
>> Monitor info message in the logs.
>>
>> Pete
>>
>> On Wed, Sep 11, 2013 at 11:55 AM, John Vines
>> <vines@apache.org <ma...@apache.org>> wrote:
>>
>> You need to delete the /accumulo directory out of hdfs
>>
>>
>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson
>> <pgcarlson@gmail.com <ma...@gmail.com>>
>> wrote:
>>
>> I removed the monitor certificates as
>> suggested, and I no longer get any messages in
>> the monitor_localhost.err file.
>>
>> When I look in the
>> monitor_localhost.localdomain.**log file and saw
>> the following INFO/Exception message:
>>
>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO
>> : Failed to obtain problem reports
>> java.lang.RuntimeException:
>> org.apache.accumulo.core.**
>> client.impl.ThriftScanner$**ScanTimedOutException
>> at
>> org.apache.accumulo.core.**
>> client.impl.ScannerIterator.**hasNext(ScannerIterator.java:**174)
>> at
>> org.apache.accumulo.server.**
>> problems.ProblemReports$3.**hasNext(ProblemReports.java:**241)
>> at
>> org.apache.accumulo.server.**
>> problems.ProblemReports.**summarize(ProblemReports.java:**299)
>> at
>> org.apache.accumulo.server.**
>> monitor.Monitor.fetchData(**Monitor.java:392)
>> at
>> org.apache.accumulo.server.**
>> monitor.Monitor$2.run(Monitor.**java:504)
>> at
>> org.apache.accumulo.core.util.**
>> LoggingRunnable.run(**LoggingRunnable.java:34)
>> at java.lang.Thread.run(Thread.**
>> java:724)
>> Caused by:
>> org.apache.accumulo.core.**
>> client.impl.ThriftScanner$**ScanTimedOutException
>> at
>> org.apache.accumulo.core.**
>> client.impl.ThriftScanner.**scan(ThriftScanner.java:212)
>> at
>> org.apache.accumulo.core.**
>> client.impl.ScannerIterator$**Reader.run(ScannerIterator.**java:82)
>> at
>> org.apache.accumulo.core.**
>> client.impl.ScannerIterator.**hasNext(ScannerIterator.java:**164)
>> ... 6 more
>>
>> I was thinking this was related to the fact I
>> didn't yet have Thrift 0.9.0 installed (due to
>> dependency issues). I now have Thrift 0.9.0
>> installed. I saved off my config files, blew
>> away the accumulo directory and extracted it
>> again from the tar.gz and copied over my conf
>> files.
>>
>> However, when I run the
>> accumulo-1.5.0/bin/accumulo init command again
>> it gives me the following error:
>>
>> [util.Initialize] FATAL: It appears this
>> location was previously initialized, exiting ...
>>
>> I can still start Accumulo like before with
>> the bin/start-all.sh command but the Accumulo
>> monitor still doesn't work IN my VM.
>>
>> Any other ideas to try?
>>
>> Pete
>>
>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines
>> <vines@apache.org <ma...@apache.org>>
>> wrote:
>>
>> Either try rerunning the monitor
>> certificates or remove the portion from
>> your accumulo-site that defines use of the
>> certificate. I suggest the latter simply
>> to remove variables at hand.
>>
>>
>> On Wed, Sep 11, 2013 at 10:54 AM, Pete
>> Carlson <pgcarlson@gmail.com
>> <ma...@gmail.com>> wrote:
>>
>> John,
>>
>> What is the monitor process called so
>> I can verify its running? I did look
>> at the thread monitor logs, and under
>> monitor_localhost.err it gives a
>> FileNotFoundException because it can't
>> find the keystore.jks under
>> accumulo-1.5.0/conf/
>>
>> I would have thought when I ran
>> ./generate_monitor_**certificate.sh it
>> would have created this.
>>
>> I was trying to run the monitor in a
>> browser IN the VM. Thats how I found
>> this problem.
>>
>> Regards,
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 10:41 AM, John
>> Vines <vines@apache.org
>> <ma...@apache.org>> wrote:
>>
>> Again, please check to make sure
>> the monitor process is running and
>> it's not reporting any errors in
>> it's logs.
>>
>> If you can verify that (and please
>> verify that first), try accessing
>> the monitor in a browser IN the VM.
>>
>>
>> On Wed, Sep 11, 2013 at 10:36 AM,
>> Pete Carlson <pgcarlson@gmail.com
>> <ma...@gmail.com>> wrote:
>>
>> All,
>>
>> Just to clarify I have a
>> Centos VM running on my
>> Windows 7 box, and I have
>> Accumulo, Hadoop, and
>> Zookeeper running on it
>> standalone. I was trying to
>> open the Accumulo monitor
>> within that VM and it failed.
>> However I can open the Hadoop
>> Namenode and Jobtracker web
>> interfaces in my browser just
>> fine.
>>
>> Brendan, I was able to connect
>> to my VM using netcat on port
>> 50095.
>>
>> However, when I try to telnet
>> to that port on my Win7 with
>> telnet using my VM's ip
>> address and port i.e.,
>>
>> telnet <IP address of vm> 50095
>>
>> I get a message: ....Could not
>> open connection to the host,
>> on port 50095: Connect failed.
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 9:15
>> AM, Brendan Heussler
>> <bheussler@gmail.com
>> <ma...@gmail.com>>
>> wrote:
>>
>> Can you try to connect to
>> your VM using netcat on
>> port 50095?
>>
>> On VM:
>> nc -l 50095
>>
>> On Client:
>> nc <ip-address of VM> 50095
>>
>> Then type "test" or
>> something on your Client
>> machine. The message
>> should be sent to your VM.
>>
>> This will help to test the
>> connectivity of the two
>> machines over port 50095
>>
>>
>> Brendan
>>
>>
>> On Tue, Sep 10, 2013 at
>> 5:22 PM, John Vines
>> <vines@apache.org
>> <ma...@apache.org>>
>> wrote:
>>
>> Are you certain the
>> monitor is running and
>> was able to bind to
>> the port? Please check
>> the monitor logs for
>> any errors.
>>
>>
>> On Tue, Sep 10, 2013
>> at 5:18 PM, Pete
>> Carlson
>> <pgcarlson@gmail.com
>> <mailto:
>> pgcarlson@gmail.com>>
>> wrote:
>>
>> John,
>>
>> I don't see port
>> 50095 in use in
>> the VM. When I
>> become root and
>> type lsof -i -P |
>> grep :50095 I
>> don't get anything
>> back.
>>
>> Any suggestions on
>> how to get the
>> port running? I
>> tried editing the
>> iptables with the
>> following command:
>>
>> iptables -I INPUT
>> -p tcp --dport
>> 50095 -j ACCEPT
>>
>> and then I typed
>>
>> service iptables save
>>
>> to save my iptable
>> changes, but when
>> I restarted my VM
>> I didn't see any
>> difference.
>>
>> Regards,
>>
>> Pete
>>
>> Looking for a
>> unique woodcraft?
>> Check out my
>> Facebook page:
>>
>> www.facebook.com/oqwcrafts
>> <
>> http://www.facebook.com/**oqwcrafts <http://www.facebook.com/oqwcrafts>>
>>
>> Also on Etsy:
>>
>> https://www.etsy.com/shop/**OlneyQualityWoodCrft<https://www.etsy.com/shop/OlneyQualityWoodCrft>
>>
>>
>> On Tue, Sep 10,
>> 2013 at 4:56 PM,
>> John Vines
>> <vines@apache.org
>> <mailto:
>> vines@apache.org>>
>> wrote:
>>
>> You don't see
>> 50095 in use
>> locally on the
>> VM or in your
>> box? You
>> should only
>> see it in use
>> in the VM. If
>> not, make sure
>> it's running.
>> If it is,
>> check the
>> monitor logs
>> and see what's
>> up.
>>
>>
>> On Tue, Sep
>> 10, 2013 at
>> 4:51 PM, Pete
>> Carlson
>> <
>> pgcarlson@gmail.com
>> <mailto:
>> pgcarlson@gmail.com>>
>> wrote:
>>
>> Hi John,
>>
>> No, it
>> looks like
>> port 50095
>> wasn't
>> open on my
>> VM. I
>> tried
>> modifying
>> the IP
>> tables to
>> make it
>> opened,
>> and
>> restarted
>> my VM but
>> when I run
>> the lsof
>> -i command
>> I don't
>> see port
>> 50095 listed.
>>
>> Pete
>>
>> Regards,
>>
>> Pete
>>
>> Looking
>> for a
>> unique
>> woodcraft?
>> Check out
>> my
>> Facebook
>> page:
>>
>> www.facebook.com/oqwcrafts
>> <
>> http://www.facebook.com/**oqwcrafts <http://www.facebook.com/oqwcrafts>>
>>
>> Also on
>> Etsy:
>>
>> https://www.etsy.com/shop/**OlneyQualityWoodCrft<https://www.etsy.com/shop/OlneyQualityWoodCrft>
>>
>>
>> On Tue,
>> Sep 10,
>> 2013 at
>> 3:56 PM,
>> John Vines
>> <
>> vines@apache.org
>> <mailto:
>> vines@apache.org>>
>> wrote:
>>
>> Do you
>> have
>> the
>> port
>> open
>> to
>> your VM?
>>
>>
>> On
>> Tue,
>> Sep
>> 10,
>> 2013
>> at
>> 3:54
>> PM,
>> Pete
>> Carlson <
>> pgcarlson@gmail.com
>> <mailto:
>> pgcarlson@gmail.com>>
>> wrote:
>>
>> Hi,
>>
>> I
>> just
>> set up
>> a
>> free
>>
>> standing
>>
>> Accumulo
>> 1.5
>> instance
>> on
>> my
>> linux
>> VM,
>> and
>> when
>> I
>> run
>> bin/start-all.sh
>> it
>> starts
>> up
>>
>> accumulo,
>> and
>> also
>>
>> connects
>> to
>> my
>> free
>>
>> standing
>>
>> Zookeeper
>> and
>> HDFS
>>
>> instances
>> .
>>
>>
>> However,
>> when
>> I
>> try to
>> pull
>> up
>> the
>> Accumulo
>> master
>> in
>> my
>>
>> FireFox
>>
>> browser
>>
>> (Firefox
>> ESR
>> 10.0.12)
>> i.e.,
>>
>> http://accumulomaster:50095/**status <http://accumulomaster:50095/status>for
>> health
>> and
>> monitoring,
>> I
>> get an
>> unable
>> to
>>
>> connect
>> error.
>>
>> I
>> also
>> tried
>>
>> running
>>
>> ./generate_monitor_**certificate.sh
>> and
>> copied
>> those
>>
>> properties
>> in
>> my
>>
>> accumulo-site.xml
>> but I
>> still
>> get
>> the
>> same
>>
>> result.
>>
>> Is
>> there
>>
>> something
>> else
>> I
>> need
>> to
>>
>> configure?
>>
>>
>> Regards,
>>
>>
>> Pete
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Josh Elser <jo...@gmail.com>.
Pete,
I assume you did some leg-work before hitting up the mailing list...
any recommendations on where you think might make sense on encapsulating
some of this information?
FAQ format? Rolled into documentation (user/admin guide)? Other?
- josh
On 09/11/2013 04:17 PM, Pete Carlson wrote:
> All,
>
> I resolved the issue. Per Eric's suggestion I changed my swappiness
> setting down to 10, and also disabled all IPV6 stuff on my VM. Once I
> did this and changed the IP address of my monitor to 127.0.0.1 my
> monitor started working.
>
> Thanks guys. :-)
>
> Regards,
>
> Pete
>
> On Wed, Sep 11, 2013 at 2:12 PM, John Vines <vines@apache.org
> <ma...@apache.org>> wrote:
>
> Furthermore, tservers being down shouldn't prevent the monitor
> page from coming up at all, so check for any other relevant
> messages in of the monitor's logs.
>
>
> On Wed, Sep 11, 2013 at 2:08 PM, Pete Carlson <pgcarlson@gmail.com
> <ma...@gmail.com>> wrote:
>
> How do I determine if the rest of Accumulo is up and running
> since I can't use the monitor?
>
> Inside the monitor logs I see messages that it connected to
> Hadoop and Zookeeper, but then later on I see this message
> stating there are no tablet servers:
>
> 2013-09-11 11:39:29,199 [server.Accumulo] WARN : System
> swappiness setting is greater than ten (60) which can cause
> time-sensitive operations to be delayed. Accumulo is time
> sensitive because it needs to maintain distributed lock agreement.
> 2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
> tracer:localhost.localdomain There are no tablet servers:
> check that zookeeper and accumulo are running.
>
> And when I log in to the accumulo shell I get the warning:
> There are no tablet servers: check that zookeeper and accumulo
> are running.
>
> Could the system swappiness setting of 60 be causing my issue?
>
> Regards,
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vines@apache.org
> <ma...@apache.org>> wrote:
>
> Is the rest of Accumulo up and running? And is that the
> only type of error in the Monitor logs?
>
>
> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson
> <pgcarlson@gmail.com <ma...@gmail.com>> wrote:
>
> Ok, I deleted /accumulo out of hdfs, initialized
> accumulo, and re-started Accumulo. I still can't see
> the monitor IN my VM browser. I still get the same
> Monitor info message in the logs.
>
> Pete
>
> On Wed, Sep 11, 2013 at 11:55 AM, John Vines
> <vines@apache.org <ma...@apache.org>> wrote:
>
> You need to delete the /accumulo directory out of hdfs
>
>
> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson
> <pgcarlson@gmail.com <ma...@gmail.com>>
> wrote:
>
> I removed the monitor certificates as
> suggested, and I no longer get any messages in
> the monitor_localhost.err file.
>
> When I look in the
> monitor_localhost.localdomain.log file and saw
> the following INFO/Exception message:
>
> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO
> : Failed to obtain problem reports
> java.lang.RuntimeException:
> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
> at
> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
> at
> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
> at
> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
> at
> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
> at
> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
> at
> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
> at java.lang.Thread.run(Thread.java:724)
> Caused by:
> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
> at
> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
> at
> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
> at
> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
> ... 6 more
>
> I was thinking this was related to the fact I
> didn't yet have Thrift 0.9.0 installed (due to
> dependency issues). I now have Thrift 0.9.0
> installed. I saved off my config files, blew
> away the accumulo directory and extracted it
> again from the tar.gz and copied over my conf
> files.
>
> However, when I run the
> accumulo-1.5.0/bin/accumulo init command again
> it gives me the following error:
>
> [util.Initialize] FATAL: It appears this
> location was previously initialized, exiting ...
>
> I can still start Accumulo like before with
> the bin/start-all.sh command but the Accumulo
> monitor still doesn't work IN my VM.
>
> Any other ideas to try?
>
> Pete
>
> On Wed, Sep 11, 2013 at 10:57 AM, John Vines
> <vines@apache.org <ma...@apache.org>>
> wrote:
>
> Either try rerunning the monitor
> certificates or remove the portion from
> your accumulo-site that defines use of the
> certificate. I suggest the latter simply
> to remove variables at hand.
>
>
> On Wed, Sep 11, 2013 at 10:54 AM, Pete
> Carlson <pgcarlson@gmail.com
> <ma...@gmail.com>> wrote:
>
> John,
>
> What is the monitor process called so
> I can verify its running? I did look
> at the thread monitor logs, and under
> monitor_localhost.err it gives a
> FileNotFoundException because it can't
> find the keystore.jks under
> accumulo-1.5.0/conf/
>
> I would have thought when I ran
> ./generate_monitor_certificate.sh it
> would have created this.
>
> I was trying to run the monitor in a
> browser IN the VM. Thats how I found
> this problem.
>
> Regards,
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 10:41 AM, John
> Vines <vines@apache.org
> <ma...@apache.org>> wrote:
>
> Again, please check to make sure
> the monitor process is running and
> it's not reporting any errors in
> it's logs.
>
> If you can verify that (and please
> verify that first), try accessing
> the monitor in a browser IN the VM.
>
>
> On Wed, Sep 11, 2013 at 10:36 AM,
> Pete Carlson <pgcarlson@gmail.com
> <ma...@gmail.com>> wrote:
>
> All,
>
> Just to clarify I have a
> Centos VM running on my
> Windows 7 box, and I have
> Accumulo, Hadoop, and
> Zookeeper running on it
> standalone. I was trying to
> open the Accumulo monitor
> within that VM and it failed.
> However I can open the Hadoop
> Namenode and Jobtracker web
> interfaces in my browser just
> fine.
>
> Brendan, I was able to connect
> to my VM using netcat on port
> 50095.
>
> However, when I try to telnet
> to that port on my Win7 with
> telnet using my VM's ip
> address and port i.e.,
>
> telnet <IP address of vm> 50095
>
> I get a message: ....Could not
> open connection to the host,
> on port 50095: Connect failed.
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 9:15
> AM, Brendan Heussler
> <bheussler@gmail.com
> <ma...@gmail.com>>
> wrote:
>
> Can you try to connect to
> your VM using netcat on
> port 50095?
>
> On VM:
> nc -l 50095
>
> On Client:
> nc <ip-address of VM> 50095
>
> Then type "test" or
> something on your Client
> machine. The message
> should be sent to your VM.
>
> This will help to test the
> connectivity of the two
> machines over port 50095
>
>
> Brendan
>
>
> On Tue, Sep 10, 2013 at
> 5:22 PM, John Vines
> <vines@apache.org
> <ma...@apache.org>>
> wrote:
>
> Are you certain the
> monitor is running and
> was able to bind to
> the port? Please check
> the monitor logs for
> any errors.
>
>
> On Tue, Sep 10, 2013
> at 5:18 PM, Pete
> Carlson
> <pgcarlson@gmail.com
> <ma...@gmail.com>>
> wrote:
>
> John,
>
> I don't see port
> 50095 in use in
> the VM. When I
> become root and
> type lsof -i -P |
> grep :50095 I
> don't get anything
> back.
>
> Any suggestions on
> how to get the
> port running? I
> tried editing the
> iptables with the
> following command:
>
> iptables -I INPUT
> -p tcp --dport
> 50095 -j ACCEPT
>
> and then I typed
>
> service iptables save
>
> to save my iptable
> changes, but when
> I restarted my VM
> I didn't see any
> difference.
>
> Regards,
>
> Pete
>
> Looking for a
> unique woodcraft?
> Check out my
> Facebook page:
> www.facebook.com/oqwcrafts
> <http://www.facebook.com/oqwcrafts>
>
> Also on Etsy:
> https://www.etsy.com/shop/OlneyQualityWoodCrft
>
>
> On Tue, Sep 10,
> 2013 at 4:56 PM,
> John Vines
> <vines@apache.org
> <ma...@apache.org>>
> wrote:
>
> You don't see
> 50095 in use
> locally on the
> VM or in your
> box? You
> should only
> see it in use
> in the VM. If
> not, make sure
> it's running.
> If it is,
> check the
> monitor logs
> and see what's
> up.
>
>
> On Tue, Sep
> 10, 2013 at
> 4:51 PM, Pete
> Carlson
> <pgcarlson@gmail.com
> <ma...@gmail.com>>
> wrote:
>
> Hi John,
>
> No, it
> looks like
> port 50095
> wasn't
> open on my
> VM. I
> tried
> modifying
> the IP
> tables to
> make it
> opened,
> and
> restarted
> my VM but
> when I run
> the lsof
> -i command
> I don't
> see port
> 50095 listed.
>
> Pete
>
> Regards,
>
> Pete
>
> Looking
> for a
> unique
> woodcraft?
> Check out
> my
> Facebook
> page:
> www.facebook.com/oqwcrafts
> <http://www.facebook.com/oqwcrafts>
>
> Also on
> Etsy:
> https://www.etsy.com/shop/OlneyQualityWoodCrft
>
>
> On Tue,
> Sep 10,
> 2013 at
> 3:56 PM,
> John Vines
> <vines@apache.org
> <ma...@apache.org>>
> wrote:
>
> Do you
> have
> the
> port
> open
> to
> your VM?
>
>
> On
> Tue,
> Sep
> 10,
> 2013
> at
> 3:54
> PM,
> Pete
> Carlson <pgcarlson@gmail.com
> <ma...@gmail.com>>
> wrote:
>
> Hi,
>
> I
> just
> set up
> a
> free
> standing
> Accumulo
> 1.5 instance
> on
> my
> linux
> VM, and
> when
> I
> run bin/start-all.sh
> it
> starts
> up
> accumulo,
> and also
> connects
> to
> my
> free
> standing
> Zookeeper
> and HDFS
> instances
> .
>
> However,
> when
> I
> try to
> pull
> up
> the Accumulo
> master
> in
> my
> FireFox
> browser
> (Firefox
> ESR 10.0.12)
> i.e.,
> http://accumulomaster:50095/status for
> health
> and monitoring,
> I
> get an
> unable
> to
> connect
> error.
>
> I
> also
> tried
> running
> ./generate_monitor_certificate.sh
> and copied
> those
> properties
> in
> my
> accumulo-site.xml
> but I
> still
> get the
> same
> result.
>
> Is
> there
> something
> else
> I
> need
> to
> configure?
>
> Regards,
>
>
> Pete
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
All,
I resolved the issue. Per Eric's suggestion I changed my swappiness
setting down to 10, and also disabled all IPV6 stuff on my VM. Once I did
this and changed the IP address of my monitor to 127.0.0.1 my monitor
started working.
Thanks guys. :-)
Regards,
Pete
On Wed, Sep 11, 2013 at 2:12 PM, John Vines <vi...@apache.org> wrote:
> Furthermore, tservers being down shouldn't prevent the monitor page from
> coming up at all, so check for any other relevant messages in of the
> monitor's logs.
>
>
> On Wed, Sep 11, 2013 at 2:08 PM, Pete Carlson <pg...@gmail.com> wrote:
>
>> How do I determine if the rest of Accumulo is up and running since I
>> can't use the monitor?
>>
>> Inside the monitor logs I see messages that it connected to Hadoop and
>> Zookeeper, but then later on I see this message stating there are no tablet
>> servers:
>>
>> 2013-09-11 11:39:29,199 [server.Accumulo] WARN : System swappiness
>> setting is greater than ten (60) which can cause time-sensitive operations
>> to be delayed. Accumulo is time sensitive because it needs to maintain
>> distributed lock agreement.
>> 2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
>> tracer:localhost.localdomain There are no tablet servers: check that
>> zookeeper and accumulo are running.
>>
>> And when I log in to the accumulo shell I get the warning: There are no
>> tablet servers: check that zookeeper and accumulo are running.
>>
>> Could the system swappiness setting of 60 be causing my issue?
>>
>> Regards,
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vi...@apache.org> wrote:
>>
>>> Is the rest of Accumulo up and running? And is that the only type of
>>> error in the Monitor logs?
>>>
>>>
>>> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> Ok, I deleted /accumulo out of hdfs, initialized accumulo, and
>>>> re-started Accumulo. I still can't see the monitor IN my VM browser. I
>>>> still get the same Monitor info message in the logs.
>>>>
>>>> Pete
>>>>
>>>> On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> You need to delete the /accumulo directory out of hdfs
>>>>>
>>>>>
>>>>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> I removed the monitor certificates as suggested, and I no longer get
>>>>>> any messages in the monitor_localhost.err file.
>>>>>>
>>>>>> When I look in the monitor_localhost.localdomain.log file and saw the
>>>>>> following INFO/Exception message:
>>>>>>
>>>>>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>>>>>> problem reports
>>>>>> java.lang.RuntimeException:
>>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>>>>>> at
>>>>>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>>>>>> at
>>>>>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>>>>>> at
>>>>>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>>>>>> at
>>>>>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>>>>>> at
>>>>>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>>>>>> at java.lang.Thread.run(Thread.java:724)
>>>>>> Caused by:
>>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>>>>>> at
>>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>>>>>> ... 6 more
>>>>>>
>>>>>> I was thinking this was related to the fact I didn't yet have Thrift
>>>>>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>>>>>> installed. I saved off my config files, blew away the accumulo directory
>>>>>> and extracted it again from the tar.gz and copied over my conf files.
>>>>>>
>>>>>> However, when I run the accumulo-1.5.0/bin/accumulo init command
>>>>>> again it gives me the following error:
>>>>>>
>>>>>> [util.Initialize] FATAL: It appears this location was previously
>>>>>> initialized, exiting ...
>>>>>>
>>>>>> I can still start Accumulo like before with the bin/start-all.sh
>>>>>> command but the Accumulo monitor still doesn't work IN my VM.
>>>>>>
>>>>>> Any other ideas to try?
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org>wrote:
>>>>>>
>>>>>>> Either try rerunning the monitor certificates or remove the portion
>>>>>>> from your accumulo-site that defines use of the certificate. I suggest the
>>>>>>> latter simply to remove variables at hand.
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> John,
>>>>>>>>
>>>>>>>> What is the monitor process called so I can verify its running? I
>>>>>>>> did look at the thread monitor logs, and under monitor_localhost.err it
>>>>>>>> gives a FileNotFoundException because it can't find the keystore.jks under
>>>>>>>> accumulo-1.5.0/conf/
>>>>>>>>
>>>>>>>> I would have thought when I ran ./generate_monitor_certificate.sh
>>>>>>>> it would have created this.
>>>>>>>>
>>>>>>>> I was trying to run the monitor in a browser IN the VM. Thats how
>>>>>>>> I found this problem.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org>wrote:
>>>>>>>>
>>>>>>>>> Again, please check to make sure the monitor process is running
>>>>>>>>> and it's not reporting any errors in it's logs.
>>>>>>>>>
>>>>>>>>> If you can verify that (and please verify that first), try
>>>>>>>>> accessing the monitor in a browser IN the VM.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <
>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> All,
>>>>>>>>>>
>>>>>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box,
>>>>>>>>>> and I have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>>>>>> just fine.
>>>>>>>>>>
>>>>>>>>>> Brendan, I was able to connect to my VM using netcat on port
>>>>>>>>>> 50095.
>>>>>>>>>>
>>>>>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>>>>>> using my VM's ip address and port i.e.,
>>>>>>>>>>
>>>>>>>>>> telnet <IP address of vm> 50095
>>>>>>>>>>
>>>>>>>>>> I get a message: ....Could not open connection to the host, on
>>>>>>>>>> port 50095: Connect failed.
>>>>>>>>>>
>>>>>>>>>> Pete
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>>>>>> bheussler@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>>>>>
>>>>>>>>>>> On VM:
>>>>>>>>>>> nc -l 50095
>>>>>>>>>>>
>>>>>>>>>>> On Client:
>>>>>>>>>>> nc <ip-address of VM> 50095
>>>>>>>>>>>
>>>>>>>>>>> Then type "test" or something on your Client machine. The
>>>>>>>>>>> message should be sent to your VM.
>>>>>>>>>>>
>>>>>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>>>>>> port 50095
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Brendan
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Are you certain the monitor is running and was able to bind to
>>>>>>>>>>>> the port? Please check the monitor logs for any errors.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <
>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> John,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I don't see port 50095 in use in the VM. When I become root
>>>>>>>>>>>>> and type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Any suggestions on how to get the port running? I tried
>>>>>>>>>>>>> editing the iptables with the following command:
>>>>>>>>>>>>>
>>>>>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>>>>>
>>>>>>>>>>>>> and then I typed
>>>>>>>>>>>>>
>>>>>>>>>>>>> service iptables save
>>>>>>>>>>>>>
>>>>>>>>>>>>> to save my iptable changes, but when I restarted my VM I
>>>>>>>>>>>>> didn't see any difference.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>
>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>
>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box?
>>>>>>>>>>>>>> You should only see it in use in the VM. If not, make sure it's running. If
>>>>>>>>>>>>>> it is, check the monitor logs and see what's up.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <
>>>>>>>>>>>>>>> vines@apache.org> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>>>>>> http://accumulomaster:50095/status for health and
>>>>>>>>>>>>>>>>> monitoring, I get an unable to connect error.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>>>>>> result.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Furthermore, tservers being down shouldn't prevent the monitor page from
coming up at all, so check for any other relevant messages in of the
monitor's logs.
On Wed, Sep 11, 2013 at 2:08 PM, Pete Carlson <pg...@gmail.com> wrote:
> How do I determine if the rest of Accumulo is up and running since I can't
> use the monitor?
>
> Inside the monitor logs I see messages that it connected to Hadoop and
> Zookeeper, but then later on I see this message stating there are no tablet
> servers:
>
> 2013-09-11 11:39:29,199 [server.Accumulo] WARN : System swappiness
> setting is greater than ten (60) which can cause time-sensitive operations
> to be delayed. Accumulo is time sensitive because it needs to maintain
> distributed lock agreement.
> 2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
> tracer:localhost.localdomain There are no tablet servers: check that
> zookeeper and accumulo are running.
>
> And when I log in to the accumulo shell I get the warning: There are no
> tablet servers: check that zookeeper and accumulo are running.
>
> Could the system swappiness setting of 60 be causing my issue?
>
> Regards,
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vi...@apache.org> wrote:
>
>> Is the rest of Accumulo up and running? And is that the only type of
>> error in the Monitor logs?
>>
>>
>> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> Ok, I deleted /accumulo out of hdfs, initialized accumulo, and
>>> re-started Accumulo. I still can't see the monitor IN my VM browser. I
>>> still get the same Monitor info message in the logs.
>>>
>>> Pete
>>>
>>> On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
>>>
>>>> You need to delete the /accumulo directory out of hdfs
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> I removed the monitor certificates as suggested, and I no longer get
>>>>> any messages in the monitor_localhost.err file.
>>>>>
>>>>> When I look in the monitor_localhost.localdomain.log file and saw the
>>>>> following INFO/Exception message:
>>>>>
>>>>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>>>>> problem reports
>>>>> java.lang.RuntimeException:
>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>>>>> at
>>>>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>>>>> at
>>>>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>>>>> at
>>>>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>>>>> at
>>>>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>>>>> at
>>>>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>>>>> at java.lang.Thread.run(Thread.java:724)
>>>>> Caused by:
>>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>>>>> at
>>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>>>>> ... 6 more
>>>>>
>>>>> I was thinking this was related to the fact I didn't yet have Thrift
>>>>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>>>>> installed. I saved off my config files, blew away the accumulo directory
>>>>> and extracted it again from the tar.gz and copied over my conf files.
>>>>>
>>>>> However, when I run the accumulo-1.5.0/bin/accumulo init command again
>>>>> it gives me the following error:
>>>>>
>>>>> [util.Initialize] FATAL: It appears this location was previously
>>>>> initialized, exiting ...
>>>>>
>>>>> I can still start Accumulo like before with the bin/start-all.sh
>>>>> command but the Accumulo monitor still doesn't work IN my VM.
>>>>>
>>>>> Any other ideas to try?
>>>>>
>>>>> Pete
>>>>>
>>>>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
>>>>>
>>>>>> Either try rerunning the monitor certificates or remove the portion
>>>>>> from your accumulo-site that defines use of the certificate. I suggest the
>>>>>> latter simply to remove variables at hand.
>>>>>>
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>
>>>>>>> John,
>>>>>>>
>>>>>>> What is the monitor process called so I can verify its running? I
>>>>>>> did look at the thread monitor logs, and under monitor_localhost.err it
>>>>>>> gives a FileNotFoundException because it can't find the keystore.jks under
>>>>>>> accumulo-1.5.0/conf/
>>>>>>>
>>>>>>> I would have thought when I ran ./generate_monitor_certificate.sh it
>>>>>>> would have created this.
>>>>>>>
>>>>>>> I was trying to run the monitor in a browser IN the VM. Thats how I
>>>>>>> found this problem.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org>wrote:
>>>>>>>
>>>>>>>> Again, please check to make sure the monitor process is running and
>>>>>>>> it's not reporting any errors in it's logs.
>>>>>>>>
>>>>>>>> If you can verify that (and please verify that first), try
>>>>>>>> accessing the monitor in a browser IN the VM.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pgcarlson@gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> All,
>>>>>>>>>
>>>>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box,
>>>>>>>>> and I have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>>>>> just fine.
>>>>>>>>>
>>>>>>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>>>>>>
>>>>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>>>>> using my VM's ip address and port i.e.,
>>>>>>>>>
>>>>>>>>> telnet <IP address of vm> 50095
>>>>>>>>>
>>>>>>>>> I get a message: ....Could not open connection to the host, on
>>>>>>>>> port 50095: Connect failed.
>>>>>>>>>
>>>>>>>>> Pete
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>>>>> bheussler@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>>>>
>>>>>>>>>> On VM:
>>>>>>>>>> nc -l 50095
>>>>>>>>>>
>>>>>>>>>> On Client:
>>>>>>>>>> nc <ip-address of VM> 50095
>>>>>>>>>>
>>>>>>>>>> Then type "test" or something on your Client machine. The
>>>>>>>>>> message should be sent to your VM.
>>>>>>>>>>
>>>>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>>>>> port 50095
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Brendan
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>
>>>>>>>>>>> Are you certain the monitor is running and was able to bind to
>>>>>>>>>>> the port? Please check the monitor logs for any errors.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <
>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> John,
>>>>>>>>>>>>
>>>>>>>>>>>> I don't see port 50095 in use in the VM. When I become root
>>>>>>>>>>>> and type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>>>>
>>>>>>>>>>>> Any suggestions on how to get the port running? I tried
>>>>>>>>>>>> editing the iptables with the following command:
>>>>>>>>>>>>
>>>>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>>>>
>>>>>>>>>>>> and then I typed
>>>>>>>>>>>>
>>>>>>>>>>>> service iptables save
>>>>>>>>>>>>
>>>>>>>>>>>> to save my iptable changes, but when I restarted my VM I didn't
>>>>>>>>>>>> see any difference.
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Pete
>>>>>>>>>>>>
>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>
>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box?
>>>>>>>>>>>>> You should only see it in use in the VM. If not, make sure it's running. If
>>>>>>>>>>>>> it is, check the monitor logs and see what's up.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vines@apache.org
>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>>>>> http://accumulomaster:50095/status for health and
>>>>>>>>>>>>>>>> monitoring, I get an unable to connect error.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>>>>> result.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
How do I determine if the rest of Accumulo is up and running since I can't
use the monitor?
Inside the monitor logs I see messages that it connected to Hadoop and
Zookeeper, but then later on I see this message stating there are no tablet
servers:
2013-09-11 11:39:29,199 [server.Accumulo] WARN : System swappiness setting
is greater than ten (60) which can cause time-sensitive operations to be
delayed. Accumulo is time sensitive because it needs to maintain
distributed lock agreement.
2013-09-11 11:39:32,506 [impl.ServerClient] WARN :
tracer:localhost.localdomain There are no tablet servers: check that
zookeeper and accumulo are running.
And when I log in to the accumulo shell I get the warning: There are no
tablet servers: check that zookeeper and accumulo are running.
Could the system swappiness setting of 60 be causing my issue?
Regards,
Pete
On Wed, Sep 11, 2013 at 1:13 PM, John Vines <vi...@apache.org> wrote:
> Is the rest of Accumulo up and running? And is that the only type of error
> in the Monitor logs?
>
>
> On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson <pg...@gmail.com> wrote:
>
>> Ok, I deleted /accumulo out of hdfs, initialized accumulo, and re-started
>> Accumulo. I still can't see the monitor IN my VM browser. I still get the
>> same Monitor info message in the logs.
>>
>> Pete
>>
>> On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
>>
>>> You need to delete the /accumulo directory out of hdfs
>>>
>>>
>>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> I removed the monitor certificates as suggested, and I no longer get
>>>> any messages in the monitor_localhost.err file.
>>>>
>>>> When I look in the monitor_localhost.localdomain.log file and saw the
>>>> following INFO/Exception message:
>>>>
>>>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>>>> problem reports
>>>> java.lang.RuntimeException:
>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>> at
>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>>>> at
>>>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>>>> at
>>>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>>>> at
>>>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>>>> at
>>>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>>>> at
>>>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>>>> at java.lang.Thread.run(Thread.java:724)
>>>> Caused by:
>>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>>> at
>>>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>>>> at
>>>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>>>> at
>>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>>>> ... 6 more
>>>>
>>>> I was thinking this was related to the fact I didn't yet have Thrift
>>>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>>>> installed. I saved off my config files, blew away the accumulo directory
>>>> and extracted it again from the tar.gz and copied over my conf files.
>>>>
>>>> However, when I run the accumulo-1.5.0/bin/accumulo init command again
>>>> it gives me the following error:
>>>>
>>>> [util.Initialize] FATAL: It appears this location was previously
>>>> initialized, exiting ...
>>>>
>>>> I can still start Accumulo like before with the bin/start-all.sh
>>>> command but the Accumulo monitor still doesn't work IN my VM.
>>>>
>>>> Any other ideas to try?
>>>>
>>>> Pete
>>>>
>>>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> Either try rerunning the monitor certificates or remove the portion
>>>>> from your accumulo-site that defines use of the certificate. I suggest the
>>>>> latter simply to remove variables at hand.
>>>>>
>>>>>
>>>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> John,
>>>>>>
>>>>>> What is the monitor process called so I can verify its running? I
>>>>>> did look at the thread monitor logs, and under monitor_localhost.err it
>>>>>> gives a FileNotFoundException because it can't find the keystore.jks under
>>>>>> accumulo-1.5.0/conf/
>>>>>>
>>>>>> I would have thought when I ran ./generate_monitor_certificate.sh it
>>>>>> would have created this.
>>>>>>
>>>>>> I was trying to run the monitor in a browser IN the VM. Thats how I
>>>>>> found this problem.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org>wrote:
>>>>>>
>>>>>>> Again, please check to make sure the monitor process is running and
>>>>>>> it's not reporting any errors in it's logs.
>>>>>>>
>>>>>>> If you can verify that (and please verify that first), try accessing
>>>>>>> the monitor in a browser IN the VM.
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> All,
>>>>>>>>
>>>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box, and
>>>>>>>> I have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>>>> just fine.
>>>>>>>>
>>>>>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>>>>>
>>>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>>>> using my VM's ip address and port i.e.,
>>>>>>>>
>>>>>>>> telnet <IP address of vm> 50095
>>>>>>>>
>>>>>>>> I get a message: ....Could not open connection to the host, on
>>>>>>>> port 50095: Connect failed.
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>>>> bheussler@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>>>
>>>>>>>>> On VM:
>>>>>>>>> nc -l 50095
>>>>>>>>>
>>>>>>>>> On Client:
>>>>>>>>> nc <ip-address of VM> 50095
>>>>>>>>>
>>>>>>>>> Then type "test" or something on your Client machine. The
>>>>>>>>> message should be sent to your VM.
>>>>>>>>>
>>>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>>>> port 50095
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Brendan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>
>>>>>>>>>> Are you certain the monitor is running and was able to bind to
>>>>>>>>>> the port? Please check the monitor logs for any errors.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <
>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> John,
>>>>>>>>>>>
>>>>>>>>>>> I don't see port 50095 in use in the VM. When I become root and
>>>>>>>>>>> type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>>>
>>>>>>>>>>> Any suggestions on how to get the port running? I tried editing
>>>>>>>>>>> the iptables with the following command:
>>>>>>>>>>>
>>>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>>>
>>>>>>>>>>> and then I typed
>>>>>>>>>>>
>>>>>>>>>>> service iptables save
>>>>>>>>>>>
>>>>>>>>>>> to save my iptable changes, but when I restarted my VM I didn't
>>>>>>>>>>> see any difference.
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Pete
>>>>>>>>>>>
>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>
>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>
>>>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box?
>>>>>>>>>>>> You should only see it in use in the VM. If not, make sure it's running. If
>>>>>>>>>>>> it is, check the monitor logs and see what's up.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>>
>>>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>
>>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>>
>>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>>>> http://accumulomaster:50095/status for health and
>>>>>>>>>>>>>>> monitoring, I get an unable to connect error.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>>>> result.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Is the rest of Accumulo up and running? And is that the only type of error
in the Monitor logs?
On Wed, Sep 11, 2013 at 1:04 PM, Pete Carlson <pg...@gmail.com> wrote:
> Ok, I deleted /accumulo out of hdfs, initialized accumulo, and re-started
> Accumulo. I still can't see the monitor IN my VM browser. I still get the
> same Monitor info message in the logs.
>
> Pete
>
> On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
>
>> You need to delete the /accumulo directory out of hdfs
>>
>>
>> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> I removed the monitor certificates as suggested, and I no longer get any
>>> messages in the monitor_localhost.err file.
>>>
>>> When I look in the monitor_localhost.localdomain.log file and saw the
>>> following INFO/Exception message:
>>>
>>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>>> problem reports
>>> java.lang.RuntimeException:
>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>> at
>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>>> at
>>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>>> at
>>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>>> at
>>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>>> at
>>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>>> at
>>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>>> at java.lang.Thread.run(Thread.java:724)
>>> Caused by:
>>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>>> at
>>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>>> at
>>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>>> at
>>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>>> ... 6 more
>>>
>>> I was thinking this was related to the fact I didn't yet have Thrift
>>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>>> installed. I saved off my config files, blew away the accumulo directory
>>> and extracted it again from the tar.gz and copied over my conf files.
>>>
>>> However, when I run the accumulo-1.5.0/bin/accumulo init command again
>>> it gives me the following error:
>>>
>>> [util.Initialize] FATAL: It appears this location was previously
>>> initialized, exiting ...
>>>
>>> I can still start Accumulo like before with the bin/start-all.sh command
>>> but the Accumulo monitor still doesn't work IN my VM.
>>>
>>> Any other ideas to try?
>>>
>>> Pete
>>>
>>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
>>>
>>>> Either try rerunning the monitor certificates or remove the portion
>>>> from your accumulo-site that defines use of the certificate. I suggest the
>>>> latter simply to remove variables at hand.
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> John,
>>>>>
>>>>> What is the monitor process called so I can verify its running? I did
>>>>> look at the thread monitor logs, and under monitor_localhost.err it gives a
>>>>> FileNotFoundException because it can't find the keystore.jks under
>>>>> accumulo-1.5.0/conf/
>>>>>
>>>>> I would have thought when I ran ./generate_monitor_certificate.sh it
>>>>> would have created this.
>>>>>
>>>>> I was trying to run the monitor in a browser IN the VM. Thats how I
>>>>> found this problem.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Pete
>>>>>
>>>>>
>>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org> wrote:
>>>>>
>>>>>> Again, please check to make sure the monitor process is running and
>>>>>> it's not reporting any errors in it's logs.
>>>>>>
>>>>>> If you can verify that (and please verify that first), try accessing
>>>>>> the monitor in a browser IN the VM.
>>>>>>
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>
>>>>>>> All,
>>>>>>>
>>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box, and
>>>>>>> I have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>>> just fine.
>>>>>>>
>>>>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>>>>
>>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>>> using my VM's ip address and port i.e.,
>>>>>>>
>>>>>>> telnet <IP address of vm> 50095
>>>>>>>
>>>>>>> I get a message: ....Could not open connection to the host, on
>>>>>>> port 50095: Connect failed.
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>>> bheussler@gmail.com> wrote:
>>>>>>>
>>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>>
>>>>>>>> On VM:
>>>>>>>> nc -l 50095
>>>>>>>>
>>>>>>>> On Client:
>>>>>>>> nc <ip-address of VM> 50095
>>>>>>>>
>>>>>>>> Then type "test" or something on your Client machine. The message
>>>>>>>> should be sent to your VM.
>>>>>>>>
>>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>>> port 50095
>>>>>>>>
>>>>>>>>
>>>>>>>> Brendan
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>
>>>>>>>>> Are you certain the monitor is running and was able to bind to the
>>>>>>>>> port? Please check the monitor logs for any errors.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pgcarlson@gmail.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> John,
>>>>>>>>>>
>>>>>>>>>> I don't see port 50095 in use in the VM. When I become root and
>>>>>>>>>> type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>>
>>>>>>>>>> Any suggestions on how to get the port running? I tried editing
>>>>>>>>>> the iptables with the following command:
>>>>>>>>>>
>>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>>
>>>>>>>>>> and then I typed
>>>>>>>>>>
>>>>>>>>>> service iptables save
>>>>>>>>>>
>>>>>>>>>> to save my iptable changes, but when I restarted my VM I didn't
>>>>>>>>>> see any difference.
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>> Pete
>>>>>>>>>>
>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>
>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>
>>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>>>>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>>>>>>>> is, check the monitor logs and see what's up.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>
>>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>>
>>>>>>>>>>>> Pete
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Pete
>>>>>>>>>>>>
>>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>>
>>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>>> http://accumulomaster:50095/status for health and
>>>>>>>>>>>>>> monitoring, I get an unable to connect error.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>>> result.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
Ok, I deleted /accumulo out of hdfs, initialized accumulo, and re-started
Accumulo. I still can't see the monitor IN my VM browser. I still get the
same Monitor info message in the logs.
Pete
On Wed, Sep 11, 2013 at 11:55 AM, John Vines <vi...@apache.org> wrote:
> You need to delete the /accumulo directory out of hdfs
>
>
> On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>
>> I removed the monitor certificates as suggested, and I no longer get any
>> messages in the monitor_localhost.err file.
>>
>> When I look in the monitor_localhost.localdomain.log file and saw the
>> following INFO/Exception message:
>>
>> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain
>> problem reports
>> java.lang.RuntimeException:
>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>> at
>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
>> at
>> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
>> at
>> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
>> at
>> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
>> at
>> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
>> at
>> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
>> at java.lang.Thread.run(Thread.java:724)
>> Caused by:
>> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
>> at
>> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
>> at
>> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
>> at
>> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
>> ... 6 more
>>
>> I was thinking this was related to the fact I didn't yet have Thrift
>> 0.9.0 installed (due to dependency issues). I now have Thrift 0.9.0
>> installed. I saved off my config files, blew away the accumulo directory
>> and extracted it again from the tar.gz and copied over my conf files.
>>
>> However, when I run the accumulo-1.5.0/bin/accumulo init command again it
>> gives me the following error:
>>
>> [util.Initialize] FATAL: It appears this location was previously
>> initialized, exiting ...
>>
>> I can still start Accumulo like before with the bin/start-all.sh command
>> but the Accumulo monitor still doesn't work IN my VM.
>>
>> Any other ideas to try?
>>
>> Pete
>>
>> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
>>
>>> Either try rerunning the monitor certificates or remove the portion from
>>> your accumulo-site that defines use of the certificate. I suggest the
>>> latter simply to remove variables at hand.
>>>
>>>
>>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> John,
>>>>
>>>> What is the monitor process called so I can verify its running? I did
>>>> look at the thread monitor logs, and under monitor_localhost.err it gives a
>>>> FileNotFoundException because it can't find the keystore.jks under
>>>> accumulo-1.5.0/conf/
>>>>
>>>> I would have thought when I ran ./generate_monitor_certificate.sh it
>>>> would have created this.
>>>>
>>>> I was trying to run the monitor in a browser IN the VM. Thats how I
>>>> found this problem.
>>>>
>>>> Regards,
>>>>
>>>> Pete
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> Again, please check to make sure the monitor process is running and
>>>>> it's not reporting any errors in it's logs.
>>>>>
>>>>> If you can verify that (and please verify that first), try accessing
>>>>> the monitor in a browser IN the VM.
>>>>>
>>>>>
>>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> All,
>>>>>>
>>>>>> Just to clarify I have a Centos VM running on my Windows 7 box, and I
>>>>>> have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>>> just fine.
>>>>>>
>>>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>>>
>>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>>> using my VM's ip address and port i.e.,
>>>>>>
>>>>>> telnet <IP address of vm> 50095
>>>>>>
>>>>>> I get a message: ....Could not open connection to the host, on port
>>>>>> 50095: Connect failed.
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>>
>>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <
>>>>>> bheussler@gmail.com> wrote:
>>>>>>
>>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>>
>>>>>>> On VM:
>>>>>>> nc -l 50095
>>>>>>>
>>>>>>> On Client:
>>>>>>> nc <ip-address of VM> 50095
>>>>>>>
>>>>>>> Then type "test" or something on your Client machine. The message
>>>>>>> should be sent to your VM.
>>>>>>>
>>>>>>> This will help to test the connectivity of the two machines over
>>>>>>> port 50095
>>>>>>>
>>>>>>>
>>>>>>> Brendan
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>
>>>>>>>> Are you certain the monitor is running and was able to bind to the
>>>>>>>> port? Please check the monitor logs for any errors.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>>
>>>>>>>>> John,
>>>>>>>>>
>>>>>>>>> I don't see port 50095 in use in the VM. When I become root and
>>>>>>>>> type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>>
>>>>>>>>> Any suggestions on how to get the port running? I tried editing
>>>>>>>>> the iptables with the following command:
>>>>>>>>>
>>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>>
>>>>>>>>> and then I typed
>>>>>>>>>
>>>>>>>>> service iptables save
>>>>>>>>>
>>>>>>>>> to save my iptable changes, but when I restarted my VM I didn't
>>>>>>>>> see any difference.
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Pete
>>>>>>>>>
>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>
>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>
>>>>>>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>>>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>>>>>>> is, check the monitor logs and see what's up.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <
>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi John,
>>>>>>>>>>>
>>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>>
>>>>>>>>>>> Pete
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Pete
>>>>>>>>>>>
>>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>>
>>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my
>>>>>>>>>>>>> linux VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>>
>>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>>> http://accumulomaster:50095/status for health and monitoring,
>>>>>>>>>>>>> I get an unable to connect error.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>>> result.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Pete
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
You need to delete the /accumulo directory out of hdfs
On Wed, Sep 11, 2013 at 11:54 AM, Pete Carlson <pg...@gmail.com> wrote:
> I removed the monitor certificates as suggested, and I no longer get any
> messages in the monitor_localhost.err file.
>
> When I look in the monitor_localhost.localdomain.log file and saw the
> following INFO/Exception message:
>
> 2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain problem
> reports
> java.lang.RuntimeException:
> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
> at
> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
> at
> org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
> at
> org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
> at
> org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
> at
> org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
> at
> org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
> at java.lang.Thread.run(Thread.java:724)
> Caused by:
> org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
> at
> org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
> at
> org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
> at
> org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
> ... 6 more
>
> I was thinking this was related to the fact I didn't yet have Thrift 0.9.0
> installed (due to dependency issues). I now have Thrift 0.9.0 installed.
> I saved off my config files, blew away the accumulo directory and
> extracted it again from the tar.gz and copied over my conf files.
>
> However, when I run the accumulo-1.5.0/bin/accumulo init command again it
> gives me the following error:
>
> [util.Initialize] FATAL: It appears this location was previously
> initialized, exiting ...
>
> I can still start Accumulo like before with the bin/start-all.sh command
> but the Accumulo monitor still doesn't work IN my VM.
>
> Any other ideas to try?
>
> Pete
>
> On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
>
>> Either try rerunning the monitor certificates or remove the portion from
>> your accumulo-site that defines use of the certificate. I suggest the
>> latter simply to remove variables at hand.
>>
>>
>> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> John,
>>>
>>> What is the monitor process called so I can verify its running? I did
>>> look at the thread monitor logs, and under monitor_localhost.err it gives a
>>> FileNotFoundException because it can't find the keystore.jks under
>>> accumulo-1.5.0/conf/
>>>
>>> I would have thought when I ran ./generate_monitor_certificate.sh it
>>> would have created this.
>>>
>>> I was trying to run the monitor in a browser IN the VM. Thats how I
>>> found this problem.
>>>
>>> Regards,
>>>
>>> Pete
>>>
>>>
>>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org> wrote:
>>>
>>>> Again, please check to make sure the monitor process is running and
>>>> it's not reporting any errors in it's logs.
>>>>
>>>> If you can verify that (and please verify that first), try accessing
>>>> the monitor in a browser IN the VM.
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> All,
>>>>>
>>>>> Just to clarify I have a Centos VM running on my Windows 7 box, and I
>>>>> have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>>> just fine.
>>>>>
>>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>>
>>>>> However, when I try to telnet to that port on my Win7 with telnet
>>>>> using my VM's ip address and port i.e.,
>>>>>
>>>>> telnet <IP address of vm> 50095
>>>>>
>>>>> I get a message: ....Could not open connection to the host, on port
>>>>> 50095: Connect failed.
>>>>>
>>>>> Pete
>>>>>
>>>>>
>>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bheussler@gmail.com
>>>>> > wrote:
>>>>>
>>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>>
>>>>>> On VM:
>>>>>> nc -l 50095
>>>>>>
>>>>>> On Client:
>>>>>> nc <ip-address of VM> 50095
>>>>>>
>>>>>> Then type "test" or something on your Client machine. The message
>>>>>> should be sent to your VM.
>>>>>>
>>>>>> This will help to test the connectivity of the two machines over port
>>>>>> 50095
>>>>>>
>>>>>>
>>>>>> Brendan
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>>>>>>
>>>>>>> Are you certain the monitor is running and was able to bind to the
>>>>>>> port? Please check the monitor logs for any errors.
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> John,
>>>>>>>>
>>>>>>>> I don't see port 50095 in use in the VM. When I become root and
>>>>>>>> type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>>
>>>>>>>> Any suggestions on how to get the port running? I tried editing
>>>>>>>> the iptables with the following command:
>>>>>>>>
>>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>>
>>>>>>>> and then I typed
>>>>>>>>
>>>>>>>> service iptables save
>>>>>>>>
>>>>>>>> to save my iptable changes, but when I restarted my VM I didn't see
>>>>>>>> any difference.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>
>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>
>>>>>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>>>>>> is, check the monitor logs and see what's up.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pgcarlson@gmail.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> Hi John,
>>>>>>>>>>
>>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>>
>>>>>>>>>> Pete
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>> Pete
>>>>>>>>>>
>>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>>
>>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>>
>>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux
>>>>>>>>>>>> VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>>
>>>>>>>>>>>> However, when I try to pull up the Accumulo master in my
>>>>>>>>>>>> FireFox browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>>> http://accumulomaster:50095/status for health and monitoring,
>>>>>>>>>>>> I get an unable to connect error.
>>>>>>>>>>>>
>>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>>> result.
>>>>>>>>>>>>
>>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Pete
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
I removed the monitor certificates as suggested, and I no longer get any
messages in the monitor_localhost.err file.
When I look in the monitor_localhost.localdomain.log file and saw the
following INFO/Exception message:
2013-09-11 11:42:50,012 [monitor.Monitor] INFO : Failed to obtain problem
reports
java.lang.RuntimeException:
org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
at
org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:174)
at
org.apache.accumulo.server.problems.ProblemReports$3.hasNext(ProblemReports.java:241)
at
org.apache.accumulo.server.problems.ProblemReports.summarize(ProblemReports.java:299)
at
org.apache.accumulo.server.monitor.Monitor.fetchData(Monitor.java:392)
at
org.apache.accumulo.server.monitor.Monitor$2.run(Monitor.java:504)
at
org.apache.accumulo.core.util.LoggingRunnable.run(LoggingRunnable.java:34)
at java.lang.Thread.run(Thread.java:724)
Caused by:
org.apache.accumulo.core.client.impl.ThriftScanner$ScanTimedOutException
at
org.apache.accumulo.core.client.impl.ThriftScanner.scan(ThriftScanner.java:212)
at
org.apache.accumulo.core.client.impl.ScannerIterator$Reader.run(ScannerIterator.java:82)
at
org.apache.accumulo.core.client.impl.ScannerIterator.hasNext(ScannerIterator.java:164)
... 6 more
I was thinking this was related to the fact I didn't yet have Thrift 0.9.0
installed (due to dependency issues). I now have Thrift 0.9.0 installed.
I saved off my config files, blew away the accumulo directory and
extracted it again from the tar.gz and copied over my conf files.
However, when I run the accumulo-1.5.0/bin/accumulo init command again it
gives me the following error:
[util.Initialize] FATAL: It appears this location was previously
initialized, exiting ...
I can still start Accumulo like before with the bin/start-all.sh command
but the Accumulo monitor still doesn't work IN my VM.
Any other ideas to try?
Pete
On Wed, Sep 11, 2013 at 10:57 AM, John Vines <vi...@apache.org> wrote:
> Either try rerunning the monitor certificates or remove the portion from
> your accumulo-site that defines use of the certificate. I suggest the
> latter simply to remove variables at hand.
>
>
> On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com>wrote:
>
>> John,
>>
>> What is the monitor process called so I can verify its running? I did
>> look at the thread monitor logs, and under monitor_localhost.err it gives a
>> FileNotFoundException because it can't find the keystore.jks under
>> accumulo-1.5.0/conf/
>>
>> I would have thought when I ran ./generate_monitor_certificate.sh it
>> would have created this.
>>
>> I was trying to run the monitor in a browser IN the VM. Thats how I
>> found this problem.
>>
>> Regards,
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org> wrote:
>>
>>> Again, please check to make sure the monitor process is running and it's
>>> not reporting any errors in it's logs.
>>>
>>> If you can verify that (and please verify that first), try accessing the
>>> monitor in a browser IN the VM.
>>>
>>>
>>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> All,
>>>>
>>>> Just to clarify I have a Centos VM running on my Windows 7 box, and I
>>>> have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>>> trying to open the Accumulo monitor within that VM and it failed. However
>>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>>> just fine.
>>>>
>>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>>
>>>> However, when I try to telnet to that port on my Win7 with telnet using
>>>> my VM's ip address and port i.e.,
>>>>
>>>> telnet <IP address of vm> 50095
>>>>
>>>> I get a message: ....Could not open connection to the host, on port
>>>> 50095: Connect failed.
>>>>
>>>> Pete
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bh...@gmail.com>wrote:
>>>>
>>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>>
>>>>> On VM:
>>>>> nc -l 50095
>>>>>
>>>>> On Client:
>>>>> nc <ip-address of VM> 50095
>>>>>
>>>>> Then type "test" or something on your Client machine. The message
>>>>> should be sent to your VM.
>>>>>
>>>>> This will help to test the connectivity of the two machines over port
>>>>> 50095
>>>>>
>>>>>
>>>>> Brendan
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>>>>>
>>>>>> Are you certain the monitor is running and was able to bind to the
>>>>>> port? Please check the monitor logs for any errors.
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>
>>>>>>> John,
>>>>>>>
>>>>>>> I don't see port 50095 in use in the VM. When I become root and
>>>>>>> type lsof -i -P | grep :50095 I don't get anything back.
>>>>>>>
>>>>>>> Any suggestions on how to get the port running? I tried editing the
>>>>>>> iptables with the following command:
>>>>>>>
>>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>>
>>>>>>> and then I typed
>>>>>>>
>>>>>>> service iptables save
>>>>>>>
>>>>>>> to save my iptable changes, but when I restarted my VM I didn't see
>>>>>>> any difference.
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>
>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>
>>>>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>>>>> is, check the monitor logs and see what's up.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>>
>>>>>>>>> Hi John,
>>>>>>>>>
>>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>>
>>>>>>>>> Pete
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Pete
>>>>>>>>>
>>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>>
>>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>>
>>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <
>>>>>>>>>> pgcarlson@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux
>>>>>>>>>>> VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>>
>>>>>>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>>> http://accumulomaster:50095/status for health and monitoring, I
>>>>>>>>>>> get an unable to connect error.
>>>>>>>>>>>
>>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and
>>>>>>>>>>> copied those properties in my accumulo-site.xml but I still get the same
>>>>>>>>>>> result.
>>>>>>>>>>>
>>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Pete
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Either try rerunning the monitor certificates or remove the portion from
your accumulo-site that defines use of the certificate. I suggest the
latter simply to remove variables at hand.
On Wed, Sep 11, 2013 at 10:54 AM, Pete Carlson <pg...@gmail.com> wrote:
> John,
>
> What is the monitor process called so I can verify its running? I did
> look at the thread monitor logs, and under monitor_localhost.err it gives a
> FileNotFoundException because it can't find the keystore.jks under
> accumulo-1.5.0/conf/
>
> I would have thought when I ran ./generate_monitor_certificate.sh it would
> have created this.
>
> I was trying to run the monitor in a browser IN the VM. Thats how I found
> this problem.
>
> Regards,
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org> wrote:
>
>> Again, please check to make sure the monitor process is running and it's
>> not reporting any errors in it's logs.
>>
>> If you can verify that (and please verify that first), try accessing the
>> monitor in a browser IN the VM.
>>
>>
>> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> All,
>>>
>>> Just to clarify I have a Centos VM running on my Windows 7 box, and I
>>> have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>>> trying to open the Accumulo monitor within that VM and it failed. However
>>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>>> just fine.
>>>
>>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>>
>>> However, when I try to telnet to that port on my Win7 with telnet using
>>> my VM's ip address and port i.e.,
>>>
>>> telnet <IP address of vm> 50095
>>>
>>> I get a message: ....Could not open connection to the host, on port
>>> 50095: Connect failed.
>>>
>>> Pete
>>>
>>>
>>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bh...@gmail.com>wrote:
>>>
>>>> Can you try to connect to your VM using netcat on port 50095?
>>>>
>>>> On VM:
>>>> nc -l 50095
>>>>
>>>> On Client:
>>>> nc <ip-address of VM> 50095
>>>>
>>>> Then type "test" or something on your Client machine. The message
>>>> should be sent to your VM.
>>>>
>>>> This will help to test the connectivity of the two machines over port
>>>> 50095
>>>>
>>>>
>>>> Brendan
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> Are you certain the monitor is running and was able to bind to the
>>>>> port? Please check the monitor logs for any errors.
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> John,
>>>>>>
>>>>>> I don't see port 50095 in use in the VM. When I become root and type
>>>>>> lsof -i -P | grep :50095 I don't get anything back.
>>>>>>
>>>>>> Any suggestions on how to get the port running? I tried editing the
>>>>>> iptables with the following command:
>>>>>>
>>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>>
>>>>>> and then I typed
>>>>>>
>>>>>> service iptables save
>>>>>>
>>>>>> to save my iptable changes, but when I restarted my VM I didn't see
>>>>>> any difference.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>> www.facebook.com/oqwcrafts
>>>>>>
>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>>>>>>
>>>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>>>> is, check the monitor logs and see what's up.
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> Hi John,
>>>>>>>>
>>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>>
>>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>>
>>>>>>>>> Do you have the port open to your VM?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pgcarlson@gmail.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux
>>>>>>>>>> VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>>
>>>>>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>>> http://accumulomaster:50095/status for health and monitoring, I
>>>>>>>>>> get an unable to connect error.
>>>>>>>>>>
>>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>>>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>>>>>>
>>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>> Pete
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
John,
What is the monitor process called so I can verify its running? I did look
at the thread monitor logs, and under monitor_localhost.err it gives a
FileNotFoundException because it can't find the keystore.jks under
accumulo-1.5.0/conf/
I would have thought when I ran ./generate_monitor_certificate.sh it would
have created this.
I was trying to run the monitor in a browser IN the VM. Thats how I found
this problem.
Regards,
Pete
On Wed, Sep 11, 2013 at 10:41 AM, John Vines <vi...@apache.org> wrote:
> Again, please check to make sure the monitor process is running and it's
> not reporting any errors in it's logs.
>
> If you can verify that (and please verify that first), try accessing the
> monitor in a browser IN the VM.
>
>
> On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com>wrote:
>
>> All,
>>
>> Just to clarify I have a Centos VM running on my Windows 7 box, and I
>> have Accumulo, Hadoop, and Zookeeper running on it standalone. I was
>> trying to open the Accumulo monitor within that VM and it failed. However
>> I can open the Hadoop Namenode and Jobtracker web interfaces in my browser
>> just fine.
>>
>> Brendan, I was able to connect to my VM using netcat on port 50095.
>>
>> However, when I try to telnet to that port on my Win7 with telnet using
>> my VM's ip address and port i.e.,
>>
>> telnet <IP address of vm> 50095
>>
>> I get a message: ....Could not open connection to the host, on port
>> 50095: Connect failed.
>>
>> Pete
>>
>>
>> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bh...@gmail.com>wrote:
>>
>>> Can you try to connect to your VM using netcat on port 50095?
>>>
>>> On VM:
>>> nc -l 50095
>>>
>>> On Client:
>>> nc <ip-address of VM> 50095
>>>
>>> Then type "test" or something on your Client machine. The message
>>> should be sent to your VM.
>>>
>>> This will help to test the connectivity of the two machines over port
>>> 50095
>>>
>>>
>>> Brendan
>>>
>>>
>>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>>>
>>>> Are you certain the monitor is running and was able to bind to the
>>>> port? Please check the monitor logs for any errors.
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> John,
>>>>>
>>>>> I don't see port 50095 in use in the VM. When I become root and type
>>>>> lsof -i -P | grep :50095 I don't get anything back.
>>>>>
>>>>> Any suggestions on how to get the port running? I tried editing the
>>>>> iptables with the following command:
>>>>>
>>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>>
>>>>> and then I typed
>>>>>
>>>>> service iptables save
>>>>>
>>>>> to save my iptable changes, but when I restarted my VM I didn't see
>>>>> any difference.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Pete
>>>>>
>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>> www.facebook.com/oqwcrafts
>>>>>
>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>>>>>
>>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>>> is, check the monitor logs and see what's up.
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>
>>>>>>> Hi John,
>>>>>>>
>>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried
>>>>>>> modifying the IP tables to make it opened, and restarted my VM but when I
>>>>>>> run the lsof -i command I don't see port 50095 listed.
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>>> www.facebook.com/oqwcrafts
>>>>>>>
>>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org>wrote:
>>>>>>>
>>>>>>>> Do you have the port open to your VM?
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux
>>>>>>>>> VM, and when I run bin/start-all.sh it starts up accumulo, and also
>>>>>>>>> connects to my free standing Zookeeper and HDFS instances .
>>>>>>>>>
>>>>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>>> http://accumulomaster:50095/status for health and monitoring, I
>>>>>>>>> get an unable to connect error.
>>>>>>>>>
>>>>>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>>>>>
>>>>>>>>> Is there something else I need to configure?
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Pete
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Again, please check to make sure the monitor process is running and it's
not reporting any errors in it's logs.
If you can verify that (and please verify that first), try accessing the
monitor in a browser IN the VM.
On Wed, Sep 11, 2013 at 10:36 AM, Pete Carlson <pg...@gmail.com> wrote:
> All,
>
> Just to clarify I have a Centos VM running on my Windows 7 box, and I have
> Accumulo, Hadoop, and Zookeeper running on it standalone. I was trying to
> open the Accumulo monitor within that VM and it failed. However I can open
> the Hadoop Namenode and Jobtracker web interfaces in my browser just fine.
>
> Brendan, I was able to connect to my VM using netcat on port 50095.
>
> However, when I try to telnet to that port on my Win7 with telnet using my
> VM's ip address and port i.e.,
>
> telnet <IP address of vm> 50095
>
> I get a message: ....Could not open connection to the host, on port
> 50095: Connect failed.
>
> Pete
>
>
> On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bh...@gmail.com>wrote:
>
>> Can you try to connect to your VM using netcat on port 50095?
>>
>> On VM:
>> nc -l 50095
>>
>> On Client:
>> nc <ip-address of VM> 50095
>>
>> Then type "test" or something on your Client machine. The message
>> should be sent to your VM.
>>
>> This will help to test the connectivity of the two machines over port
>> 50095
>>
>>
>> Brendan
>>
>>
>> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>>
>>> Are you certain the monitor is running and was able to bind to the port?
>>> Please check the monitor logs for any errors.
>>>
>>>
>>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> John,
>>>>
>>>> I don't see port 50095 in use in the VM. When I become root and type
>>>> lsof -i -P | grep :50095 I don't get anything back.
>>>>
>>>> Any suggestions on how to get the port running? I tried editing the
>>>> iptables with the following command:
>>>>
>>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>>
>>>> and then I typed
>>>>
>>>> service iptables save
>>>>
>>>> to save my iptable changes, but when I restarted my VM I didn't see any
>>>> difference.
>>>>
>>>> Regards,
>>>>
>>>> Pete
>>>>
>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>> www.facebook.com/oqwcrafts
>>>>
>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> You don't see 50095 in use locally on the VM or in your box? You
>>>>> should only see it in use in the VM. If not, make sure it's running. If it
>>>>> is, check the monitor logs and see what's up.
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> Hi John,
>>>>>>
>>>>>> No, it looks like port 50095 wasn't open on my VM. I tried modifying
>>>>>> the IP tables to make it opened, and restarted my VM but when I run the
>>>>>> lsof -i command I don't see port 50095 listed.
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>>> www.facebook.com/oqwcrafts
>>>>>>
>>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>>>>>>
>>>>>>> Do you have the port open to your VM?
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux VM,
>>>>>>>> and when I run bin/start-all.sh it starts up accumulo, and also connects to
>>>>>>>> my free standing Zookeeper and HDFS instances .
>>>>>>>>
>>>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>>>> http://accumulomaster:50095/status for health and monitoring, I
>>>>>>>> get an unable to connect error.
>>>>>>>>
>>>>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>>>>
>>>>>>>> Is there something else I need to configure?
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
All,
Just to clarify I have a Centos VM running on my Windows 7 box, and I have
Accumulo, Hadoop, and Zookeeper running on it standalone. I was trying to
open the Accumulo monitor within that VM and it failed. However I can open
the Hadoop Namenode and Jobtracker web interfaces in my browser just fine.
Brendan, I was able to connect to my VM using netcat on port 50095.
However, when I try to telnet to that port on my Win7 with telnet using my
VM's ip address and port i.e.,
telnet <IP address of vm> 50095
I get a message: ....Could not open connection to the host, on port
50095: Connect failed.
Pete
On Wed, Sep 11, 2013 at 9:15 AM, Brendan Heussler <bh...@gmail.com>wrote:
> Can you try to connect to your VM using netcat on port 50095?
>
> On VM:
> nc -l 50095
>
> On Client:
> nc <ip-address of VM> 50095
>
> Then type "test" or something on your Client machine. The message should
> be sent to your VM.
>
> This will help to test the connectivity of the two machines over port 50095
>
>
> Brendan
>
>
> On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
>
>> Are you certain the monitor is running and was able to bind to the port?
>> Please check the monitor logs for any errors.
>>
>>
>> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> John,
>>>
>>> I don't see port 50095 in use in the VM. When I become root and type
>>> lsof -i -P | grep :50095 I don't get anything back.
>>>
>>> Any suggestions on how to get the port running? I tried editing the
>>> iptables with the following command:
>>>
>>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>>
>>> and then I typed
>>>
>>> service iptables save
>>>
>>> to save my iptable changes, but when I restarted my VM I didn't see any
>>> difference.
>>>
>>> Regards,
>>>
>>> Pete
>>>
>>> Looking for a unique woodcraft? Check out my Facebook page:
>>> www.facebook.com/oqwcrafts
>>>
>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>
>>>
>>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>>>
>>>> You don't see 50095 in use locally on the VM or in your box? You should
>>>> only see it in use in the VM. If not, make sure it's running. If it is,
>>>> check the monitor logs and see what's up.
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> Hi John,
>>>>>
>>>>> No, it looks like port 50095 wasn't open on my VM. I tried modifying
>>>>> the IP tables to make it opened, and restarted my VM but when I run the
>>>>> lsof -i command I don't see port 50095 listed.
>>>>>
>>>>> Pete
>>>>>
>>>>> Regards,
>>>>>
>>>>> Pete
>>>>>
>>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>>> www.facebook.com/oqwcrafts
>>>>>
>>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>>>>>
>>>>>> Do you have the port open to your VM?
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux VM,
>>>>>>> and when I run bin/start-all.sh it starts up accumulo, and also connects to
>>>>>>> my free standing Zookeeper and HDFS instances .
>>>>>>>
>>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>>> http://accumulomaster:50095/status for health and monitoring, I get
>>>>>>> an unable to connect error.
>>>>>>>
>>>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>>>
>>>>>>> Is there something else I need to configure?
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
RE: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by "Aaron K. Reffett" <ak...@cert.org>.
I installed Accumulo 1.5.0 with Hadoop 1.2.1 and Zookeeper 3.4.5 in a similar way a couple days ago and have the same issue attempting to connect to the monitor from a remote machine while connections to it from localhost work and I found why: the monitor appears to only be binding lo as evidenced by netstat -nl:
tcp 0 0 ::ffff:127.0.0.1:50095 :::* LISTEN
~Aaron
From: Brendan Heussler [mailto:bheussler@gmail.com]
Sent: Wednesday, September 11, 2013 9:15 AM
To: user@accumulo.apache.org; vines
Subject: Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Can you try to connect to your VM using netcat on port 50095?
On VM:
nc -l 50095
On Client:
nc <ip-address of VM> 50095
Then type "test" or something on your Client machine. The message should be sent to your VM.
This will help to test the connectivity of the two machines over port 50095
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Brendan Heussler <bh...@gmail.com>.
Can you try to connect to your VM using netcat on port 50095?
On VM:
nc -l 50095
On Client:
nc <ip-address of VM> 50095
Then type "test" or something on your Client machine. The message should
be sent to your VM.
This will help to test the connectivity of the two machines over port 50095
Brendan
On Tue, Sep 10, 2013 at 5:22 PM, John Vines <vi...@apache.org> wrote:
> Are you certain the monitor is running and was able to bind to the port?
> Please check the monitor logs for any errors.
>
>
> On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com> wrote:
>
>> John,
>>
>> I don't see port 50095 in use in the VM. When I become root and type
>> lsof -i -P | grep :50095 I don't get anything back.
>>
>> Any suggestions on how to get the port running? I tried editing the
>> iptables with the following command:
>>
>> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>>
>> and then I typed
>>
>> service iptables save
>>
>> to save my iptable changes, but when I restarted my VM I didn't see any
>> difference.
>>
>> Regards,
>>
>> Pete
>>
>> Looking for a unique woodcraft? Check out my Facebook page:
>> www.facebook.com/oqwcrafts
>>
>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>
>>
>> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>>
>>> You don't see 50095 in use locally on the VM or in your box? You should
>>> only see it in use in the VM. If not, make sure it's running. If it is,
>>> check the monitor logs and see what's up.
>>>
>>>
>>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> Hi John,
>>>>
>>>> No, it looks like port 50095 wasn't open on my VM. I tried modifying
>>>> the IP tables to make it opened, and restarted my VM but when I run the
>>>> lsof -i command I don't see port 50095 listed.
>>>>
>>>> Pete
>>>>
>>>> Regards,
>>>>
>>>> Pete
>>>>
>>>> Looking for a unique woodcraft? Check out my Facebook page:
>>>> www.facebook.com/oqwcrafts
>>>>
>>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>>>>
>>>>> Do you have the port open to your VM?
>>>>>
>>>>>
>>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I just set up a free standing Accumulo 1.5 instance on my linux VM,
>>>>>> and when I run bin/start-all.sh it starts up accumulo, and also connects to
>>>>>> my free standing Zookeeper and HDFS instances .
>>>>>>
>>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>>> browser (Firefox ESR 10.0.12) i.e.,
>>>>>> http://accumulomaster:50095/status for health and monitoring, I get
>>>>>> an unable to connect error.
>>>>>>
>>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>>
>>>>>> Is there something else I need to configure?
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Pete
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Are you certain the monitor is running and was able to bind to the port?
Please check the monitor logs for any errors.
On Tue, Sep 10, 2013 at 5:18 PM, Pete Carlson <pg...@gmail.com> wrote:
> John,
>
> I don't see port 50095 in use in the VM. When I become root and type lsof
> -i -P | grep :50095 I don't get anything back.
>
> Any suggestions on how to get the port running? I tried editing the
> iptables with the following command:
>
> iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
>
> and then I typed
>
> service iptables save
>
> to save my iptable changes, but when I restarted my VM I didn't see any
> difference.
>
> Regards,
>
> Pete
>
> Looking for a unique woodcraft? Check out my Facebook page:
> www.facebook.com/oqwcrafts
>
> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>
>
> On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
>
>> You don't see 50095 in use locally on the VM or in your box? You should
>> only see it in use in the VM. If not, make sure it's running. If it is,
>> check the monitor logs and see what's up.
>>
>>
>> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> Hi John,
>>>
>>> No, it looks like port 50095 wasn't open on my VM. I tried modifying
>>> the IP tables to make it opened, and restarted my VM but when I run the
>>> lsof -i command I don't see port 50095 listed.
>>>
>>> Pete
>>>
>>> Regards,
>>>
>>> Pete
>>>
>>> Looking for a unique woodcraft? Check out my Facebook page:
>>> www.facebook.com/oqwcrafts
>>>
>>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>>
>>>
>>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>>>
>>>> Do you have the port open to your VM?
>>>>
>>>>
>>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I just set up a free standing Accumulo 1.5 instance on my linux VM,
>>>>> and when I run bin/start-all.sh it starts up accumulo, and also connects to
>>>>> my free standing Zookeeper and HDFS instances .
>>>>>
>>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>>> browser (Firefox ESR 10.0.12) i.e., http://accumulomaster:50095/status for
>>>>> health and monitoring, I get an unable to connect error.
>>>>>
>>>>> I also tried running ./generate_monitor_certificate.sh and copied
>>>>> those properties in my accumulo-site.xml but I still get the same result.
>>>>>
>>>>> Is there something else I need to configure?
>>>>>
>>>>> Regards,
>>>>>
>>>>> Pete
>>>>>
>>>>
>>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
John,
I don't see port 50095 in use in the VM. When I become root and type lsof
-i -P | grep :50095 I don't get anything back.
Any suggestions on how to get the port running? I tried editing the
iptables with the following command:
iptables -I INPUT -p tcp --dport 50095 -j ACCEPT
and then I typed
service iptables save
to save my iptable changes, but when I restarted my VM I didn't see any
difference.
Regards,
Pete
Looking for a unique woodcraft? Check out my Facebook page:
www.facebook.com/oqwcrafts
Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
On Tue, Sep 10, 2013 at 4:56 PM, John Vines <vi...@apache.org> wrote:
> You don't see 50095 in use locally on the VM or in your box? You should
> only see it in use in the VM. If not, make sure it's running. If it is,
> check the monitor logs and see what's up.
>
>
> On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com> wrote:
>
>> Hi John,
>>
>> No, it looks like port 50095 wasn't open on my VM. I tried modifying the
>> IP tables to make it opened, and restarted my VM but when I run the lsof -i
>> command I don't see port 50095 listed.
>>
>> Pete
>>
>> Regards,
>>
>> Pete
>>
>> Looking for a unique woodcraft? Check out my Facebook page:
>> www.facebook.com/oqwcrafts
>>
>> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>>
>>
>> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>>
>>> Do you have the port open to your VM?
>>>
>>>
>>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>>
>>>> Hi,
>>>>
>>>> I just set up a free standing Accumulo 1.5 instance on my linux VM, and
>>>> when I run bin/start-all.sh it starts up accumulo, and also connects to my
>>>> free standing Zookeeper and HDFS instances .
>>>>
>>>> However, when I try to pull up the Accumulo master in my FireFox
>>>> browser (Firefox ESR 10.0.12) i.e., http://accumulomaster:50095/status for
>>>> health and monitoring, I get an unable to connect error.
>>>>
>>>> I also tried running ./generate_monitor_certificate.sh and copied those
>>>> properties in my accumulo-site.xml but I still get the same result.
>>>>
>>>> Is there something else I need to configure?
>>>>
>>>> Regards,
>>>>
>>>> Pete
>>>>
>>>
>>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
You don't see 50095 in use locally on the VM or in your box? You should
only see it in use in the VM. If not, make sure it's running. If it is,
check the monitor logs and see what's up.
On Tue, Sep 10, 2013 at 4:51 PM, Pete Carlson <pg...@gmail.com> wrote:
> Hi John,
>
> No, it looks like port 50095 wasn't open on my VM. I tried modifying the
> IP tables to make it opened, and restarted my VM but when I run the lsof -i
> command I don't see port 50095 listed.
>
> Pete
>
> Regards,
>
> Pete
>
> Looking for a unique woodcraft? Check out my Facebook page:
> www.facebook.com/oqwcrafts
>
> Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
>
>
> On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
>
>> Do you have the port open to your VM?
>>
>>
>> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com>wrote:
>>
>>> Hi,
>>>
>>> I just set up a free standing Accumulo 1.5 instance on my linux VM, and
>>> when I run bin/start-all.sh it starts up accumulo, and also connects to my
>>> free standing Zookeeper and HDFS instances .
>>>
>>> However, when I try to pull up the Accumulo master in my FireFox browser
>>> (Firefox ESR 10.0.12) i.e., http://accumulomaster:50095/status for
>>> health and monitoring, I get an unable to connect error.
>>>
>>> I also tried running ./generate_monitor_certificate.sh and copied those
>>> properties in my accumulo-site.xml but I still get the same result.
>>>
>>> Is there something else I need to configure?
>>>
>>> Regards,
>>>
>>> Pete
>>>
>>
>>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by Pete Carlson <pg...@gmail.com>.
Hi John,
No, it looks like port 50095 wasn't open on my VM. I tried modifying the
IP tables to make it opened, and restarted my VM but when I run the lsof -i
command I don't see port 50095 listed.
Pete
Regards,
Pete
Looking for a unique woodcraft? Check out my Facebook page:
www.facebook.com/oqwcrafts
Also on Etsy: https://www.etsy.com/shop/OlneyQualityWoodCrft
On Tue, Sep 10, 2013 at 3:56 PM, John Vines <vi...@apache.org> wrote:
> Do you have the port open to your VM?
>
>
> On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com> wrote:
>
>> Hi,
>>
>> I just set up a free standing Accumulo 1.5 instance on my linux VM, and
>> when I run bin/start-all.sh it starts up accumulo, and also connects to my
>> free standing Zookeeper and HDFS instances .
>>
>> However, when I try to pull up the Accumulo master in my FireFox browser
>> (Firefox ESR 10.0.12) i.e., http://accumulomaster:50095/status for
>> health and monitoring, I get an unable to connect error.
>>
>> I also tried running ./generate_monitor_certificate.sh and copied those
>> properties in my accumulo-site.xml but I still get the same result.
>>
>> Is there something else I need to configure?
>>
>> Regards,
>>
>> Pete
>>
>
>
Re: Can't get Accumulo 1.5 monitor interface to start in my browser
Posted by John Vines <vi...@apache.org>.
Do you have the port open to your VM?
On Tue, Sep 10, 2013 at 3:54 PM, Pete Carlson <pg...@gmail.com> wrote:
> Hi,
>
> I just set up a free standing Accumulo 1.5 instance on my linux VM, and
> when I run bin/start-all.sh it starts up accumulo, and also connects to my
> free standing Zookeeper and HDFS instances .
>
> However, when I try to pull up the Accumulo master in my FireFox browser
> (Firefox ESR 10.0.12) i.e., http://accumulomaster:50095/status for health
> and monitoring, I get an unable to connect error.
>
> I also tried running ./generate_monitor_certificate.sh and copied those
> properties in my accumulo-site.xml but I still get the same result.
>
> Is there something else I need to configure?
>
> Regards,
>
> Pete
>