You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@maven.apache.org by amaresh mourya <am...@gmail.com> on 2011/04/14 11:28:45 UTC
overriding goal's configuration from command line?
Hi All,
I have a POM which has a plugin. I have configured it to use some specific
settings at the time of command line invocation of the goal. I set these
configurations in execution ID as "default-cli".
This MyPlugins:hiPlugin:1.0:hi goals just prints the output in format of :
${person} says ${greetings}
When I ran goal (MyPlugins:hiPlugin:1.0:hi) on command line I got the
expected output that was : "Chandan says Welcome"
But My question is why am I not able to override these configurations from
command line, I wanted to run goal with parameter (MyPlugins:hiPlugin:1.0:hi
-Dperson=Vishal) to get the output as "Vishal says Welcome". But I am still
getting output "Chandan says Welcome".
Here is my POM.
<project xmlns="http://maven.apache.org/POM/4.0.0">
<modelVersion>4.0.0</modelVersion>
<groupId>Application6</groupId>
<artifactId>mavenProj</artifactId>
<version>1.0-SNAPSHOT</version>
<description>Project for mavenProj</description>
<build>
<plugins>
<plugin>
<groupId>MyPlugins</groupId>
<artifactId>hiPlugin</artifactId>
<version>1.0</version>
<executions>
<execution>
<id>default-cli</id>
<goals>
<goal>hi</goal>
</goals>
<configuration>
<greetings>welcome</greetings>
<person>chandan</person>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
<pluginRepositories>
....
</pluginRepositories>
</project>
Thanks,
Amaresh
Re: overriding goal's configuration from command line?
Posted by amaresh mourya <am...@gmail.com>.
Thanks Tim and Stephen...
-Amaresh
On Thu, Apr 14, 2011 at 5:30 PM, Stephen Connolly <
stephen.alan.connolly@gmail.com> wrote:
> BUT if you have specified a configuration using a fixed value, then
> that default property will be ignored so if you have
>
> <plugin>
> <groupId>org.apache.maven.plugins</groupId>
> <artifactId>maven-compiler-plugin</artifactId>
> <version>2.0.2</version>
> <configuration>
> <source>1.6</source>
> <target>1.6</target>
> </configuration>
> </plugin>
>
> Then the property will not be considered
>
> if you have
>
> <properties>
> <maven.compiler.source>1.6</maven.compiler.source>
> </properties>
> ...
> <plugin>
> <groupId>org.apache.maven.plugins</groupId>
> <artifactId>maven-compiler-plugin</artifactId>
> <version>2.0.2</version>
> <configuration>
> <source>${maven.compiler.source}</source>
> <target>1.6</target>
> </configuration>
> </plugin>
>
> then the property will be defaulted but can be overiden from the command
> line.
>
> On 14 April 2011 11:42, Tim Kettler <ti...@udo.edu> wrote:
> > Hi,
> >
> > you can look that up in the documentation of the goal [1]. If an
> expression
> > is defined for a parameter that is what you can use as a property on the
> > commandline. In your example: -Dmaven.compiler.source=1.5
> >
> > -Tim
> >
> > [1]
> http://maven.apache.org/plugins/maven-compiler-plugin/compile-mojo.html
> >
> > Am 14.04.2011 12:16, schrieb amaresh mourya:
> >>
> >> Hi,
> >>
> >> How do I override compiler source to be used If I run mvn
> compiler:compile
> >> from the command line.
> >>
> >> Compiler:compile goal has parameter called source. Doesn't that mean If
> I
> >> run
> >> [ mvn compiler:compile -Dsource=1.5 ] it should use 1.5 instead of 1.6?
> >>
> >> My POM is like :
> >>
> >> <?xml version="1.0" encoding="UTF-8" ?>
> >> <project xmlns="http://maven.apache.org/POM/4.0.0">
> >> <modelVersion>4.0.0</modelVersion>
> >> <groupId>Application6</groupId>
> >> <artifactId>mavenProj</artifactId>
> >> <version>1.0-SNAPSHOT</version>
> >> <description>Project for mavenProj</description>
> >> <build>
> >> <plugins>
> >> <plugin>
> >> <groupId>org.apache.maven.plugins</groupId>
> >> <artifactId>maven-compiler-plugin</artifactId>
> >> <version>2.0.2</version>
> >> <configuration>
> >> <source>1.6</source>
> >> <target>1.6</target>
> >> </configuration>
> >> </plugin>
> >> </plugins>
> >> </build>
> >> </project>
> >>
> >>
> >> thanks
> >> --Amaresh
> >>
> >> On Thu, Apr 14, 2011 at 3:22 PM, Stephen Connolly<
> >> stephen.alan.connolly@gmail.com> wrote:
> >>
> >>> what you can do in that case is define properties in the pom and use
> >>> those properties to define the default-cli values.
> >>>
> >>> properties set via the CLI override properties declared in the POM.
> >>>
> >>> <project xmlns="http://maven.apache.org/POM/4.0.0">
> >>> <modelVersion>4.0.0</modelVersion>
> >>> <groupId>Application6</groupId>
> >>> <artifactId>mavenProj</artifactId>
> >>> <version>1.0-SNAPSHOT</version>
> >>> <description>Project for mavenProj</description>
> >>> <properties>
> >>> <greetings>welcome</greetings>
> >>> <person>chandan</person>
> >>> </properties>
> >>> <build>
> >>> <plugins>
> >>> <plugin>
> >>> <groupId>MyPlugins</groupId>
> >>> <artifactId>hiPlugin</artifactId>
> >>> <version>1.0</version>
> >>> <executions>
> >>> <execution>
> >>> <id>default-cli</id>
> >>> <goals>
> >>> <goal>hi</goal>
> >>> </goals>
> >>> <configuration>
> >>> <greetings>${greetings}</greetings>
> >>> <person>${person}</person>
> >>> </configuration>
> >>> </execution>
> >>> </executions>
> >>> </plugin>
> >>> </plugins>
> >>> </build>
> >>> <pluginRepositories>
> >>> ....
> >>> </pluginRepositories>
> >>> </project>
> >>>
> >>> Note that the property names do not have to be the same as the
> >>> <code>@parameter expression="${myplugin.greeting}"</code> style
> >>> default properties you specified in your mojo, but usually you would
> >>> keep them the same... unless you are relying on those properties for
> >>> the lifecycle-invoked goals
> >>>
> >>> -Stephen
> >>>
> >>> On 14 April 2011 10:28, amaresh mourya<am...@gmail.com>
> wrote:
> >>>>
> >>>> Hi All,
> >>>>
> >>>> I have a POM which has a plugin. I have configured it to use some
> >>>
> >>> specific
> >>>>
> >>>> settings at the time of command line invocation of the goal. I set
> these
> >>>> configurations in execution ID as "default-cli".
> >>>>
> >>>> This MyPlugins:hiPlugin:1.0:hi goals just prints the output in format
> of
> >>>
> >>> :
> >>>>
> >>>> ${person} says ${greetings}
> >>>> When I ran goal (MyPlugins:hiPlugin:1.0:hi) on command line I got the
> >>>> expected output that was : "Chandan says Welcome"
> >>>> But My question is why am I not able to override these configurations
> >>>
> >>> from
> >>>>
> >>>> command line, I wanted to run goal with parameter
> >>>
> >>> (MyPlugins:hiPlugin:1.0:hi
> >>>>
> >>>> -Dperson=Vishal) to get the output as "Vishal says Welcome". But I am
> >>>
> >>> still
> >>>>
> >>>> getting output "Chandan says Welcome".
> >>>>
> >>>> Here is my POM.
> >>>>
> >>>> <project xmlns="http://maven.apache.org/POM/4.0.0">
> >>>> <modelVersion>4.0.0</modelVersion>
> >>>> <groupId>Application6</groupId>
> >>>> <artifactId>mavenProj</artifactId>
> >>>> <version>1.0-SNAPSHOT</version>
> >>>> <description>Project for mavenProj</description>
> >>>> <build>
> >>>> <plugins>
> >>>> <plugin>
> >>>> <groupId>MyPlugins</groupId>
> >>>> <artifactId>hiPlugin</artifactId>
> >>>> <version>1.0</version>
> >>>> <executions>
> >>>> <execution>
> >>>> <id>default-cli</id>
> >>>> <goals>
> >>>> <goal>hi</goal>
> >>>> </goals>
> >>>> <configuration>
> >>>> <greetings>welcome</greetings>
> >>>> <person>chandan</person>
> >>>> </configuration>
> >>>> </execution>
> >>>> </executions>
> >>>> </plugin>
> >>>> </plugins>
> >>>> </build>
> >>>> <pluginRepositories>
> >>>> ....
> >>>> </pluginRepositories>
> >>>> </project>
> >>>>
> >>>>
> >>>> Thanks,
> >>>> Amaresh
> >>>>
> >>>
> >>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
>
Re: overriding goal's configuration from command line?
Posted by Stephen Connolly <st...@gmail.com>.
BUT if you have specified a configuration using a fixed value, then
that default property will be ignored so if you have
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>2.0.2</version>
<configuration>
<source>1.6</source>
<target>1.6</target>
</configuration>
</plugin>
Then the property will not be considered
if you have
<properties>
<maven.compiler.source>1.6</maven.compiler.source>
</properties>
...
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>2.0.2</version>
<configuration>
<source>${maven.compiler.source}</source>
<target>1.6</target>
</configuration>
</plugin>
then the property will be defaulted but can be overiden from the command line.
On 14 April 2011 11:42, Tim Kettler <ti...@udo.edu> wrote:
> Hi,
>
> you can look that up in the documentation of the goal [1]. If an expression
> is defined for a parameter that is what you can use as a property on the
> commandline. In your example: -Dmaven.compiler.source=1.5
>
> -Tim
>
> [1] http://maven.apache.org/plugins/maven-compiler-plugin/compile-mojo.html
>
> Am 14.04.2011 12:16, schrieb amaresh mourya:
>>
>> Hi,
>>
>> How do I override compiler source to be used If I run mvn compiler:compile
>> from the command line.
>>
>> Compiler:compile goal has parameter called source. Doesn't that mean If I
>> run
>> [ mvn compiler:compile -Dsource=1.5 ] it should use 1.5 instead of 1.6?
>>
>> My POM is like :
>>
>> <?xml version="1.0" encoding="UTF-8" ?>
>> <project xmlns="http://maven.apache.org/POM/4.0.0">
>> <modelVersion>4.0.0</modelVersion>
>> <groupId>Application6</groupId>
>> <artifactId>mavenProj</artifactId>
>> <version>1.0-SNAPSHOT</version>
>> <description>Project for mavenProj</description>
>> <build>
>> <plugins>
>> <plugin>
>> <groupId>org.apache.maven.plugins</groupId>
>> <artifactId>maven-compiler-plugin</artifactId>
>> <version>2.0.2</version>
>> <configuration>
>> <source>1.6</source>
>> <target>1.6</target>
>> </configuration>
>> </plugin>
>> </plugins>
>> </build>
>> </project>
>>
>>
>> thanks
>> --Amaresh
>>
>> On Thu, Apr 14, 2011 at 3:22 PM, Stephen Connolly<
>> stephen.alan.connolly@gmail.com> wrote:
>>
>>> what you can do in that case is define properties in the pom and use
>>> those properties to define the default-cli values.
>>>
>>> properties set via the CLI override properties declared in the POM.
>>>
>>> <project xmlns="http://maven.apache.org/POM/4.0.0">
>>> <modelVersion>4.0.0</modelVersion>
>>> <groupId>Application6</groupId>
>>> <artifactId>mavenProj</artifactId>
>>> <version>1.0-SNAPSHOT</version>
>>> <description>Project for mavenProj</description>
>>> <properties>
>>> <greetings>welcome</greetings>
>>> <person>chandan</person>
>>> </properties>
>>> <build>
>>> <plugins>
>>> <plugin>
>>> <groupId>MyPlugins</groupId>
>>> <artifactId>hiPlugin</artifactId>
>>> <version>1.0</version>
>>> <executions>
>>> <execution>
>>> <id>default-cli</id>
>>> <goals>
>>> <goal>hi</goal>
>>> </goals>
>>> <configuration>
>>> <greetings>${greetings}</greetings>
>>> <person>${person}</person>
>>> </configuration>
>>> </execution>
>>> </executions>
>>> </plugin>
>>> </plugins>
>>> </build>
>>> <pluginRepositories>
>>> ....
>>> </pluginRepositories>
>>> </project>
>>>
>>> Note that the property names do not have to be the same as the
>>> <code>@parameter expression="${myplugin.greeting}"</code> style
>>> default properties you specified in your mojo, but usually you would
>>> keep them the same... unless you are relying on those properties for
>>> the lifecycle-invoked goals
>>>
>>> -Stephen
>>>
>>> On 14 April 2011 10:28, amaresh mourya<am...@gmail.com> wrote:
>>>>
>>>> Hi All,
>>>>
>>>> I have a POM which has a plugin. I have configured it to use some
>>>
>>> specific
>>>>
>>>> settings at the time of command line invocation of the goal. I set these
>>>> configurations in execution ID as "default-cli".
>>>>
>>>> This MyPlugins:hiPlugin:1.0:hi goals just prints the output in format of
>>>
>>> :
>>>>
>>>> ${person} says ${greetings}
>>>> When I ran goal (MyPlugins:hiPlugin:1.0:hi) on command line I got the
>>>> expected output that was : "Chandan says Welcome"
>>>> But My question is why am I not able to override these configurations
>>>
>>> from
>>>>
>>>> command line, I wanted to run goal with parameter
>>>
>>> (MyPlugins:hiPlugin:1.0:hi
>>>>
>>>> -Dperson=Vishal) to get the output as "Vishal says Welcome". But I am
>>>
>>> still
>>>>
>>>> getting output "Chandan says Welcome".
>>>>
>>>> Here is my POM.
>>>>
>>>> <project xmlns="http://maven.apache.org/POM/4.0.0">
>>>> <modelVersion>4.0.0</modelVersion>
>>>> <groupId>Application6</groupId>
>>>> <artifactId>mavenProj</artifactId>
>>>> <version>1.0-SNAPSHOT</version>
>>>> <description>Project for mavenProj</description>
>>>> <build>
>>>> <plugins>
>>>> <plugin>
>>>> <groupId>MyPlugins</groupId>
>>>> <artifactId>hiPlugin</artifactId>
>>>> <version>1.0</version>
>>>> <executions>
>>>> <execution>
>>>> <id>default-cli</id>
>>>> <goals>
>>>> <goal>hi</goal>
>>>> </goals>
>>>> <configuration>
>>>> <greetings>welcome</greetings>
>>>> <person>chandan</person>
>>>> </configuration>
>>>> </execution>
>>>> </executions>
>>>> </plugin>
>>>> </plugins>
>>>> </build>
>>>> <pluginRepositories>
>>>> ....
>>>> </pluginRepositories>
>>>> </project>
>>>>
>>>>
>>>> Thanks,
>>>> Amaresh
>>>>
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
Re: overriding goal's configuration from command line?
Posted by Tim Kettler <ti...@udo.edu>.
Hi,
you can look that up in the documentation of the goal [1]. If an
expression is defined for a parameter that is what you can use as a
property on the commandline. In your example: -Dmaven.compiler.source=1.5
-Tim
[1] http://maven.apache.org/plugins/maven-compiler-plugin/compile-mojo.html
Am 14.04.2011 12:16, schrieb amaresh mourya:
> Hi,
>
> How do I override compiler source to be used If I run mvn compiler:compile
> from the command line.
>
> Compiler:compile goal has parameter called source. Doesn't that mean If I
> run
> [ mvn compiler:compile -Dsource=1.5 ] it should use 1.5 instead of 1.6?
>
> My POM is like :
>
> <?xml version="1.0" encoding="UTF-8" ?>
> <project xmlns="http://maven.apache.org/POM/4.0.0">
> <modelVersion>4.0.0</modelVersion>
> <groupId>Application6</groupId>
> <artifactId>mavenProj</artifactId>
> <version>1.0-SNAPSHOT</version>
> <description>Project for mavenProj</description>
> <build>
> <plugins>
> <plugin>
> <groupId>org.apache.maven.plugins</groupId>
> <artifactId>maven-compiler-plugin</artifactId>
> <version>2.0.2</version>
> <configuration>
> <source>1.6</source>
> <target>1.6</target>
> </configuration>
> </plugin>
> </plugins>
> </build>
> </project>
>
>
> thanks
> --Amaresh
>
> On Thu, Apr 14, 2011 at 3:22 PM, Stephen Connolly<
> stephen.alan.connolly@gmail.com> wrote:
>
>> what you can do in that case is define properties in the pom and use
>> those properties to define the default-cli values.
>>
>> properties set via the CLI override properties declared in the POM.
>>
>> <project xmlns="http://maven.apache.org/POM/4.0.0">
>> <modelVersion>4.0.0</modelVersion>
>> <groupId>Application6</groupId>
>> <artifactId>mavenProj</artifactId>
>> <version>1.0-SNAPSHOT</version>
>> <description>Project for mavenProj</description>
>> <properties>
>> <greetings>welcome</greetings>
>> <person>chandan</person>
>> </properties>
>> <build>
>> <plugins>
>> <plugin>
>> <groupId>MyPlugins</groupId>
>> <artifactId>hiPlugin</artifactId>
>> <version>1.0</version>
>> <executions>
>> <execution>
>> <id>default-cli</id>
>> <goals>
>> <goal>hi</goal>
>> </goals>
>> <configuration>
>> <greetings>${greetings}</greetings>
>> <person>${person}</person>
>> </configuration>
>> </execution>
>> </executions>
>> </plugin>
>> </plugins>
>> </build>
>> <pluginRepositories>
>> ....
>> </pluginRepositories>
>> </project>
>>
>> Note that the property names do not have to be the same as the
>> <code>@parameter expression="${myplugin.greeting}"</code> style
>> default properties you specified in your mojo, but usually you would
>> keep them the same... unless you are relying on those properties for
>> the lifecycle-invoked goals
>>
>> -Stephen
>>
>> On 14 April 2011 10:28, amaresh mourya<am...@gmail.com> wrote:
>>> Hi All,
>>>
>>> I have a POM which has a plugin. I have configured it to use some
>> specific
>>> settings at the time of command line invocation of the goal. I set these
>>> configurations in execution ID as "default-cli".
>>>
>>> This MyPlugins:hiPlugin:1.0:hi goals just prints the output in format of
>> :
>>> ${person} says ${greetings}
>>> When I ran goal (MyPlugins:hiPlugin:1.0:hi) on command line I got the
>>> expected output that was : "Chandan says Welcome"
>>> But My question is why am I not able to override these configurations
>> from
>>> command line, I wanted to run goal with parameter
>> (MyPlugins:hiPlugin:1.0:hi
>>> -Dperson=Vishal) to get the output as "Vishal says Welcome". But I am
>> still
>>> getting output "Chandan says Welcome".
>>>
>>> Here is my POM.
>>>
>>> <project xmlns="http://maven.apache.org/POM/4.0.0">
>>> <modelVersion>4.0.0</modelVersion>
>>> <groupId>Application6</groupId>
>>> <artifactId>mavenProj</artifactId>
>>> <version>1.0-SNAPSHOT</version>
>>> <description>Project for mavenProj</description>
>>> <build>
>>> <plugins>
>>> <plugin>
>>> <groupId>MyPlugins</groupId>
>>> <artifactId>hiPlugin</artifactId>
>>> <version>1.0</version>
>>> <executions>
>>> <execution>
>>> <id>default-cli</id>
>>> <goals>
>>> <goal>hi</goal>
>>> </goals>
>>> <configuration>
>>> <greetings>welcome</greetings>
>>> <person>chandan</person>
>>> </configuration>
>>> </execution>
>>> </executions>
>>> </plugin>
>>> </plugins>
>>> </build>
>>> <pluginRepositories>
>>> ....
>>> </pluginRepositories>
>>> </project>
>>>
>>>
>>> Thanks,
>>> Amaresh
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
Re: overriding goal's configuration from command line?
Posted by amaresh mourya <am...@gmail.com>.
Hi,
How do I override compiler source to be used If I run mvn compiler:compile
from the command line.
Compiler:compile goal has parameter called source. Doesn't that mean If I
run
[ mvn compiler:compile -Dsource=1.5 ] it should use 1.5 instead of 1.6?
My POM is like :
<?xml version="1.0" encoding="UTF-8" ?>
<project xmlns="http://maven.apache.org/POM/4.0.0">
<modelVersion>4.0.0</modelVersion>
<groupId>Application6</groupId>
<artifactId>mavenProj</artifactId>
<version>1.0-SNAPSHOT</version>
<description>Project for mavenProj</description>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>2.0.2</version>
<configuration>
<source>1.6</source>
<target>1.6</target>
</configuration>
</plugin>
</plugins>
</build>
</project>
thanks
--Amaresh
On Thu, Apr 14, 2011 at 3:22 PM, Stephen Connolly <
stephen.alan.connolly@gmail.com> wrote:
> what you can do in that case is define properties in the pom and use
> those properties to define the default-cli values.
>
> properties set via the CLI override properties declared in the POM.
>
> <project xmlns="http://maven.apache.org/POM/4.0.0">
> <modelVersion>4.0.0</modelVersion>
> <groupId>Application6</groupId>
> <artifactId>mavenProj</artifactId>
> <version>1.0-SNAPSHOT</version>
> <description>Project for mavenProj</description>
> <properties>
> <greetings>welcome</greetings>
> <person>chandan</person>
> </properties>
> <build>
> <plugins>
> <plugin>
> <groupId>MyPlugins</groupId>
> <artifactId>hiPlugin</artifactId>
> <version>1.0</version>
> <executions>
> <execution>
> <id>default-cli</id>
> <goals>
> <goal>hi</goal>
> </goals>
> <configuration>
> <greetings>${greetings}</greetings>
> <person>${person}</person>
> </configuration>
> </execution>
> </executions>
> </plugin>
> </plugins>
> </build>
> <pluginRepositories>
> ....
> </pluginRepositories>
> </project>
>
> Note that the property names do not have to be the same as the
> <code>@parameter expression="${myplugin.greeting}"</code> style
> default properties you specified in your mojo, but usually you would
> keep them the same... unless you are relying on those properties for
> the lifecycle-invoked goals
>
> -Stephen
>
> On 14 April 2011 10:28, amaresh mourya <am...@gmail.com> wrote:
> > Hi All,
> >
> > I have a POM which has a plugin. I have configured it to use some
> specific
> > settings at the time of command line invocation of the goal. I set these
> > configurations in execution ID as "default-cli".
> >
> > This MyPlugins:hiPlugin:1.0:hi goals just prints the output in format of
> :
> > ${person} says ${greetings}
> > When I ran goal (MyPlugins:hiPlugin:1.0:hi) on command line I got the
> > expected output that was : "Chandan says Welcome"
> > But My question is why am I not able to override these configurations
> from
> > command line, I wanted to run goal with parameter
> (MyPlugins:hiPlugin:1.0:hi
> > -Dperson=Vishal) to get the output as "Vishal says Welcome". But I am
> still
> > getting output "Chandan says Welcome".
> >
> > Here is my POM.
> >
> > <project xmlns="http://maven.apache.org/POM/4.0.0">
> > <modelVersion>4.0.0</modelVersion>
> > <groupId>Application6</groupId>
> > <artifactId>mavenProj</artifactId>
> > <version>1.0-SNAPSHOT</version>
> > <description>Project for mavenProj</description>
> > <build>
> > <plugins>
> > <plugin>
> > <groupId>MyPlugins</groupId>
> > <artifactId>hiPlugin</artifactId>
> > <version>1.0</version>
> > <executions>
> > <execution>
> > <id>default-cli</id>
> > <goals>
> > <goal>hi</goal>
> > </goals>
> > <configuration>
> > <greetings>welcome</greetings>
> > <person>chandan</person>
> > </configuration>
> > </execution>
> > </executions>
> > </plugin>
> > </plugins>
> > </build>
> > <pluginRepositories>
> > ....
> > </pluginRepositories>
> > </project>
> >
> >
> > Thanks,
> > Amaresh
> >
>
Re: overriding goal's configuration from command line?
Posted by Stephen Connolly <st...@gmail.com>.
what you can do in that case is define properties in the pom and use
those properties to define the default-cli values.
properties set via the CLI override properties declared in the POM.
<project xmlns="http://maven.apache.org/POM/4.0.0">
<modelVersion>4.0.0</modelVersion>
<groupId>Application6</groupId>
<artifactId>mavenProj</artifactId>
<version>1.0-SNAPSHOT</version>
<description>Project for mavenProj</description>
<properties>
<greetings>welcome</greetings>
<person>chandan</person>
</properties>
<build>
<plugins>
<plugin>
<groupId>MyPlugins</groupId>
<artifactId>hiPlugin</artifactId>
<version>1.0</version>
<executions>
<execution>
<id>default-cli</id>
<goals>
<goal>hi</goal>
</goals>
<configuration>
<greetings>${greetings}</greetings>
<person>${person}</person>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
<pluginRepositories>
....
</pluginRepositories>
</project>
Note that the property names do not have to be the same as the
<code>@parameter expression="${myplugin.greeting}"</code> style
default properties you specified in your mojo, but usually you would
keep them the same... unless you are relying on those properties for
the lifecycle-invoked goals
-Stephen
On 14 April 2011 10:28, amaresh mourya <am...@gmail.com> wrote:
> Hi All,
>
> I have a POM which has a plugin. I have configured it to use some specific
> settings at the time of command line invocation of the goal. I set these
> configurations in execution ID as "default-cli".
>
> This MyPlugins:hiPlugin:1.0:hi goals just prints the output in format of :
> ${person} says ${greetings}
> When I ran goal (MyPlugins:hiPlugin:1.0:hi) on command line I got the
> expected output that was : "Chandan says Welcome"
> But My question is why am I not able to override these configurations from
> command line, I wanted to run goal with parameter (MyPlugins:hiPlugin:1.0:hi
> -Dperson=Vishal) to get the output as "Vishal says Welcome". But I am still
> getting output "Chandan says Welcome".
>
> Here is my POM.
>
> <project xmlns="http://maven.apache.org/POM/4.0.0">
> <modelVersion>4.0.0</modelVersion>
> <groupId>Application6</groupId>
> <artifactId>mavenProj</artifactId>
> <version>1.0-SNAPSHOT</version>
> <description>Project for mavenProj</description>
> <build>
> <plugins>
> <plugin>
> <groupId>MyPlugins</groupId>
> <artifactId>hiPlugin</artifactId>
> <version>1.0</version>
> <executions>
> <execution>
> <id>default-cli</id>
> <goals>
> <goal>hi</goal>
> </goals>
> <configuration>
> <greetings>welcome</greetings>
> <person>chandan</person>
> </configuration>
> </execution>
> </executions>
> </plugin>
> </plugins>
> </build>
> <pluginRepositories>
> ....
> </pluginRepositories>
> </project>
>
>
> Thanks,
> Amaresh
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org