You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Charles Moulliard <ch...@gmail.com> on 2012/10/24 10:49:20 UTC

CloudStack running in Virtualbox

Hi,

Hi. I have installed successfully the following image in virtualbox (
http://download.cloud.com/templates/devcloud/DevCloud.ova) and created an
instance. Unfortunately, I cannot connect to it with its IP address
(10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
(10.0.2.50). Is there something else to configure ?
When I log to the Unix machine (where CloudStack has been deployed), I can
ping 10.0.2.15 address but not 10.0.2.179.

Regards,

-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

RE: CloudStack running in Virtualbox

Posted by Rohit Yadav <ro...@citrix.com>.
Since the VM is on its private/guest network and the whole setup is inside virtualbox's NAT from your host 10.0.2.2 (gateway, or guessing 10.0.2.50 vbox ip), you won't be able to reach the internal network.
You're able to ssh, open client n browser into devcloud/mgmgt server as they are port forwarded (see devcloud vm's settings->network). You won't be able to reach 10.0.2.15 as your nics won't know how to deal with it, also because in vbox settings for devcloud, you'll find devcloud vm (10.0.2.15) port 8080 and others forwarded to localhost's (your host os, not vbox's) respective ports.

If you want to be able to access your vm and have its network reachable from your host-os, you can try to go through a wiki recently edited by Edison (search previous emails on this ML, sorry could n't find the url, Internet is too slow at present) where you use host-only adapter instead of NAT.
If it's a basic zone (most likely) and you've not configured any firewall rules, you should be able to reach the user vm (10.0.2.179) from your devcloud vm (10.0.2.15).

Hope this helps,
Rohit

________________________________________
From: Charles Moulliard [ch007m@gmail.com]
Sent: Wednesday, October 24, 2012 3:06 PM
To: cloudstack-users@incubator.apache.org
Subject: Re: CloudStack running in Virtualbox

Are you connecting from the host running virtual box to the VM running the
management server over SSH or HTTP?
> No.

 10.0.2.50 = VirtualBox IP address
 10.0.2.15 = CloudStack management server
 10.0.2.179 = an instance created using the console (
http://localhost:8080/client/). I can connect to the web console from the
ubuntu machine where VirtualBox has been installed and running the image
CloudStack

I cannot connect to the management server using address
http://10.0.2.15:8080/client

On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
<do...@citrix.com>wrote:

> Hi Charles,
>
> Need more information.
>
> Are you connecting from the host running virtual box to the VM running the
> management server over SSH or HTTP?
>
> For HTTP, AFAIK you not to include the port and virtual path.  E.g.
> http://10.0.2.179:8080/client
>
> Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be
> the VirtualBox gateway and 10.0.2.179 the management server.  So what is
> 10.0.2.15?
>
> DL
>
>
> -----Original Message-----
> From: Charles Moulliard [mailto:ch007m@gmail.com]
> Sent: 24 October 2012 09:49
> To: cloudstack-users@incubator.apache.org
> Subject: CloudStack running in Virtualbox
>
> Hi,
>
> Hi. I have installed successfully the following image in virtualbox (
> http://download.cloud.com/templates/devcloud/DevCloud.ova) and created an
> instance. Unfortunately, I cannot connect to it with its IP address
> (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
> (10.0.2.50). Is there something else to configure ?
> When I log to the Unix machine (where CloudStack has been deployed), I can
> ping 10.0.2.15 address but not 10.0.2.179.
>
> Regards,
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



--
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
I do not re initialize the mac address

On Wed, Oct 24, 2012 at 6:14 PM, Edison Su <Ed...@citrix.com> wrote:

> When you import devcloud image into virtualbox, please do NOT select
> "re-initialize the MAC address of all network cards"
> I'll add it on the document.
>
> > -----Original Message-----
> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> > Sent: Wednesday, October 24, 2012 6:29 AM
> > To: cloudstack-users@incubator.apache.org
> > Subject: Re: CloudStack running in Virtualbox
> >
> > Hi Rohit,
> >
> > I have followed instructions here ((
> > https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> > oud+environment+setup)
> > but I cannot ping the DevCloud VM machine at this address 192.168.56.2
> > from
> > the machine where VB is running.
> >
> > Host = LinuxMint running VirtualBox
> >
> > ping 192.168.56.2
> > PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
> > From 192.168.56.1 icmp_seq=1 Destination Host Unreachable
> >
> >  ifconfig
> > eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
> >           inet addr:192.168.1.5  Bcast:192.168.1.255
> > Mask:255.255.255.0
> >           inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
> >           Interrupt:20 Memory:e9600000-e9620000
> >
> > vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
> >           inet addr:192.168.56.1  Bcast:192.168.56.255
> > Mask:255.255.255.0
> >           inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)
> >
> > Guest = DevCloud VM
> >
> > After logging using root / password
> >
> > ifconfig -->
> > xenbr0 = 192.168.56.2/255.255.255.0
> > eth0 is not configured
> > eth1 has a MAC address but no IP address
> > xenbr1 has a MAC address but no IP address
> >
> > So something is missing in the config presented at the link ?
> >
> > Regards,
> >
> > Charles
> >
> > On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch...@gmail.com>
> > wrote:
> >
> > > Hi Rohit,
> > >
> > > Thx for the update.
> > > Additional questions :
> > > - If the machine containing the VB is linked by example to the
> > following
> > > network 192.168.1.x/255.255.255.0 and has access to internet using a
> > DHCP
> > > server, do you think that the network to be used for the host only
> > adapter
> > > should be 192.168.56.x as defined here (
> > >
> > https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> > oud+environment+setup)
> > > ?
> > > - How will it be possible for the DevCloud VM machine to have access
> > to
> > > internet if we use only between VB and cloud machine the host only
> > adapter
> > > and not NAT or Bridge adapter as second adapter ?
> > >
> > > There is a missing piece in the wiki page : You should tell to the
> > user
> > > how it should configure the vboxnet0 adapter in VB that we will use
> > with
> > > the host only adapter ! The existing page explains only how to
> > configure
> > > the DevCloud VM (/etc/hosts file)
> > >
> > > Regards,
> > >
> > > Charles
> > >
> > >
> > > On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav
> > <ro...@citrix.com>wrote:
> > >
> > >> I think the bridge mode may not be a good idea, as it may pollute
> > your
> > >> LAN.
> > >> I suggest you try the host-only adapter:
> > >>
> > https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> > oud+environment+setup
> > >>
> > >> Note: this for the latest asf master where we use maven and ant is
> > only
> > >> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you
> > setup the
> > >> network in devcloud for host-only adapter).
> > >>
> > >> Regards.
> > >> ________________________________________
> > >> From: Charles Moulliard [ch007m@gmail.com]
> > >> Sent: Wednesday, October 24, 2012 4:34 PM
> > >> To: cloudstack-users@incubator.apache.org
> > >> Subject: Re: CloudStack running in Virtualbox
> > >>
> > >> Damned. By changing the network adapter from NAT to bridge adapter
> > in VB,
> > >> I
> > >> cannot anymore connect to the management server from the browser
> > running
> > >> in
> > >> the host machine (= ubuntu machine) using localhost or 192.168.1.3
> > or
> > >> 10.0.2.15 followed by 8080/client
> > >>
> > >> ssh works well from ubuntu to the VB image (CloudStack) like you can
> > see
> > >> hereafter
> > >>
> > >> ssh root@192.168.1.3
> > >> root@192.168.1.3's password:
> > >> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
> > >>
> > >>  * Documentation:  https://help.ubuntu.com/
> > >>
> > >>   System information as of Wed Oct 24 04:01:34 PDT 2012
> > >>
> > >>   System load:  0.07              Processes:             112
> > >>   Usage of /:   31.3% of 5.57GB   Users logged in:       1
> > >>   Memory usage: 22%               IP address for eth0:   192.168.1.3
> > >>   Swap usage:   0%                IP address for xenbr0: 192.168.1.3
> > >>
> > >>
> > >> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard
> > <ch007m@gmail.com
> > >> >wrote:
> > >>
> > >> > I will change from NAT to bridge adapter.
> > >> > DHCP is configured on the DSL router (= LAN where the machine is
> > >> plugged)
> > >> >
> > >> >
> > >> > On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> > >> > donal.lafferty@citrix.com> wrote:
> > >> >
> > >> >> This seems to explain the problem you are seeing.
> > >> >>
> > >> >> "The disadvantage of NAT mode is that, much like a private
> > network
> > >> behind
> > >> >> a router, the virtual machine is invisible and unreachable from
> > the
> > >> outside
> > >> >> internet; you cannot run a server this way unless you set up port
> > >> >> forwarding (described below)."
> > >> >>
> > >> >> See http://www.virtualbox.org/manual/ch06.html#network_nat
> > >> >>
> > >> >>
> > >> >> If you want to stick with NAT, you should create a VM in the
> > virtual
> > >> box
> > >> >> install that can run your browser.  Alternatively, use a bridge
> > >> adapter.
> > >> >>
> > >> >>
> > >> >> BTW, where is the DHCP daemon that is allocating addresses to
> > your VMs?
> > >> >>
> > >> >>
> > >> >>
> > >> >>
> > >> >> -----Original Message-----
> > >> >> From: Charles Moulliard [mailto:ch007m@gmail.com]
> > >> >> Sent: 24 October 2012 10:37
> > >> >> To: cloudstack-users@incubator.apache.org
> > >> >> Subject: Re: CloudStack running in Virtualbox
> > >> >>
> > >> >> Are you connecting from the host running virtual box to the VM
> > running
> > >> the
> > >> >> management server over SSH or HTTP?
> > >> >> > No.
> > >> >>
> > >> >>  10.0.2.50 = VirtualBox IP address
> > >> >>  10.0.2.15 = CloudStack management server
> > >> >>  10.0.2.179 = an instance created using the console (
> > >> >> http://localhost:8080/client/). I can connect to the web console
> > from
> > >> the
> > >> >> ubuntu machine where VirtualBox has been installed and running
> > the
> > >> image
> > >> >> CloudStack
> > >> >>
> > >> >> I cannot connect to the management server using address
> > >> >> http://10.0.2.15:8080/client
> > >> >>
> > >> >> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> > >> >> <do...@citrix.com>wrote:
> > >> >>
> > >> >> > Hi Charles,
> > >> >> >
> > >> >> > Need more information.
> > >> >> >
> > >> >> > Are you connecting from the host running virtual box to the VM
> > >> running
> > >> >> the
> > >> >> > management server over SSH or HTTP?
> > >> >> >
> > >> >> > For HTTP, AFAIK you not to include the port and virtual path.
> > E.g.
> > >> >> > http://10.0.2.179:8080/client
> > >> >> >
> > >> >> > Also, can you confirm what IP addresses you have?  10.0.2.50
> > seems
> > >> to be
> > >> >> > the VirtualBox gateway and 10.0.2.179 the management server.
> > So
> > >> what is
> > >> >> > 10.0.2.15?
> > >> >> >
> > >> >> > DL
> > >> >> >
> > >> >> >
> > >> >> > -----Original Message-----
> > >> >> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> > >> >> > Sent: 24 October 2012 09:49
> > >> >> > To: cloudstack-users@incubator.apache.org
> > >> >> > Subject: CloudStack running in Virtualbox
> > >> >> >
> > >> >> > Hi,
> > >> >> >
> > >> >> > Hi. I have installed successfully the following image in
> > virtualbox (
> > >> >> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and
> > >> created
> > >> >> an
> > >> >> > instance. Unfortunately, I cannot connect to it with its IP
> > address
> > >> >> > (10.0.2.179). VirtualBox uses NAT and a host only adapter +
> > vboxnet
> > >> >> > (10.0.2.50). Is there something else to configure ?
> > >> >> > When I log to the Unix machine (where CloudStack has been
> > deployed),
> > >> I
> > >> >> can
> > >> >> > ping 10.0.2.15 address but not 10.0.2.179.
> > >> >> >
> > >> >> > Regards,
> > >> >> >
> > >> >> > --
> > >> >> > Charles Moulliard
> > >> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >> >> >
> > >> >>
> > >> >>
> > >> >>
> > >> >> --
> > >> >> Charles Moulliard
> > >> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >> >>
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> > Charles Moulliard
> > >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >> >
> > >> >
> > >> >
> > >>
> > >>
> > >> --
> > >> Charles Moulliard
> > >> Apache Committer / Sr. Enterprise Architect (RedHat)
> > >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >>
> > >
> > >
> > >
> > > --
> > > Charles Moulliard
> > > Apache Committer / Sr. Enterprise Architect (RedHat)
> > > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> > >
> > >
> > >
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

RE: CloudStack running in Virtualbox

Posted by Edison Su <Ed...@citrix.com>.
When you import devcloud image into virtualbox, please do NOT select "re-initialize the MAC address of all network cards"
I'll add it on the document.

> -----Original Message-----
> From: Charles Moulliard [mailto:ch007m@gmail.com]
> Sent: Wednesday, October 24, 2012 6:29 AM
> To: cloudstack-users@incubator.apache.org
> Subject: Re: CloudStack running in Virtualbox
> 
> Hi Rohit,
> 
> I have followed instructions here ((
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> oud+environment+setup)
> but I cannot ping the DevCloud VM machine at this address 192.168.56.2
> from
> the machine where VB is running.
> 
> Host = LinuxMint running VirtualBox
> 
> ping 192.168.56.2
> PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
> From 192.168.56.1 icmp_seq=1 Destination Host Unreachable
> 
>  ifconfig
> eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
>           inet addr:192.168.1.5  Bcast:192.168.1.255
> Mask:255.255.255.0
>           inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
>           Interrupt:20 Memory:e9600000-e9620000
> 
> vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
>           inet addr:192.168.56.1  Bcast:192.168.56.255
> Mask:255.255.255.0
>           inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)
> 
> Guest = DevCloud VM
> 
> After logging using root / password
> 
> ifconfig -->
> xenbr0 = 192.168.56.2/255.255.255.0
> eth0 is not configured
> eth1 has a MAC address but no IP address
> xenbr1 has a MAC address but no IP address
> 
> So something is missing in the config presented at the link ?
> 
> Regards,
> 
> Charles
> 
> On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch...@gmail.com>
> wrote:
> 
> > Hi Rohit,
> >
> > Thx for the update.
> > Additional questions :
> > - If the machine containing the VB is linked by example to the
> following
> > network 192.168.1.x/255.255.255.0 and has access to internet using a
> DHCP
> > server, do you think that the network to be used for the host only
> adapter
> > should be 192.168.56.x as defined here (
> >
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> oud+environment+setup)
> > ?
> > - How will it be possible for the DevCloud VM machine to have access
> to
> > internet if we use only between VB and cloud machine the host only
> adapter
> > and not NAT or Bridge adapter as second adapter ?
> >
> > There is a missing piece in the wiki page : You should tell to the
> user
> > how it should configure the vboxnet0 adapter in VB that we will use
> with
> > the host only adapter ! The existing page explains only how to
> configure
> > the DevCloud VM (/etc/hosts file)
> >
> > Regards,
> >
> > Charles
> >
> >
> > On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav
> <ro...@citrix.com>wrote:
> >
> >> I think the bridge mode may not be a good idea, as it may pollute
> your
> >> LAN.
> >> I suggest you try the host-only adapter:
> >>
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcl
> oud+environment+setup
> >>
> >> Note: this for the latest asf master where we use maven and ant is
> only
> >> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you
> setup the
> >> network in devcloud for host-only adapter).
> >>
> >> Regards.
> >> ________________________________________
> >> From: Charles Moulliard [ch007m@gmail.com]
> >> Sent: Wednesday, October 24, 2012 4:34 PM
> >> To: cloudstack-users@incubator.apache.org
> >> Subject: Re: CloudStack running in Virtualbox
> >>
> >> Damned. By changing the network adapter from NAT to bridge adapter
> in VB,
> >> I
> >> cannot anymore connect to the management server from the browser
> running
> >> in
> >> the host machine (= ubuntu machine) using localhost or 192.168.1.3
> or
> >> 10.0.2.15 followed by 8080/client
> >>
> >> ssh works well from ubuntu to the VB image (CloudStack) like you can
> see
> >> hereafter
> >>
> >> ssh root@192.168.1.3
> >> root@192.168.1.3's password:
> >> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
> >>
> >>  * Documentation:  https://help.ubuntu.com/
> >>
> >>   System information as of Wed Oct 24 04:01:34 PDT 2012
> >>
> >>   System load:  0.07              Processes:             112
> >>   Usage of /:   31.3% of 5.57GB   Users logged in:       1
> >>   Memory usage: 22%               IP address for eth0:   192.168.1.3
> >>   Swap usage:   0%                IP address for xenbr0: 192.168.1.3
> >>
> >>
> >> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard
> <ch007m@gmail.com
> >> >wrote:
> >>
> >> > I will change from NAT to bridge adapter.
> >> > DHCP is configured on the DSL router (= LAN where the machine is
> >> plugged)
> >> >
> >> >
> >> > On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> >> > donal.lafferty@citrix.com> wrote:
> >> >
> >> >> This seems to explain the problem you are seeing.
> >> >>
> >> >> "The disadvantage of NAT mode is that, much like a private
> network
> >> behind
> >> >> a router, the virtual machine is invisible and unreachable from
> the
> >> outside
> >> >> internet; you cannot run a server this way unless you set up port
> >> >> forwarding (described below)."
> >> >>
> >> >> See http://www.virtualbox.org/manual/ch06.html#network_nat
> >> >>
> >> >>
> >> >> If you want to stick with NAT, you should create a VM in the
> virtual
> >> box
> >> >> install that can run your browser.  Alternatively, use a bridge
> >> adapter.
> >> >>
> >> >>
> >> >> BTW, where is the DHCP daemon that is allocating addresses to
> your VMs?
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> -----Original Message-----
> >> >> From: Charles Moulliard [mailto:ch007m@gmail.com]
> >> >> Sent: 24 October 2012 10:37
> >> >> To: cloudstack-users@incubator.apache.org
> >> >> Subject: Re: CloudStack running in Virtualbox
> >> >>
> >> >> Are you connecting from the host running virtual box to the VM
> running
> >> the
> >> >> management server over SSH or HTTP?
> >> >> > No.
> >> >>
> >> >>  10.0.2.50 = VirtualBox IP address
> >> >>  10.0.2.15 = CloudStack management server
> >> >>  10.0.2.179 = an instance created using the console (
> >> >> http://localhost:8080/client/). I can connect to the web console
> from
> >> the
> >> >> ubuntu machine where VirtualBox has been installed and running
> the
> >> image
> >> >> CloudStack
> >> >>
> >> >> I cannot connect to the management server using address
> >> >> http://10.0.2.15:8080/client
> >> >>
> >> >> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> >> >> <do...@citrix.com>wrote:
> >> >>
> >> >> > Hi Charles,
> >> >> >
> >> >> > Need more information.
> >> >> >
> >> >> > Are you connecting from the host running virtual box to the VM
> >> running
> >> >> the
> >> >> > management server over SSH or HTTP?
> >> >> >
> >> >> > For HTTP, AFAIK you not to include the port and virtual path.
> E.g.
> >> >> > http://10.0.2.179:8080/client
> >> >> >
> >> >> > Also, can you confirm what IP addresses you have?  10.0.2.50
> seems
> >> to be
> >> >> > the VirtualBox gateway and 10.0.2.179 the management server.
> So
> >> what is
> >> >> > 10.0.2.15?
> >> >> >
> >> >> > DL
> >> >> >
> >> >> >
> >> >> > -----Original Message-----
> >> >> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> >> >> > Sent: 24 October 2012 09:49
> >> >> > To: cloudstack-users@incubator.apache.org
> >> >> > Subject: CloudStack running in Virtualbox
> >> >> >
> >> >> > Hi,
> >> >> >
> >> >> > Hi. I have installed successfully the following image in
> virtualbox (
> >> >> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and
> >> created
> >> >> an
> >> >> > instance. Unfortunately, I cannot connect to it with its IP
> address
> >> >> > (10.0.2.179). VirtualBox uses NAT and a host only adapter +
> vboxnet
> >> >> > (10.0.2.50). Is there something else to configure ?
> >> >> > When I log to the Unix machine (where CloudStack has been
> deployed),
> >> I
> >> >> can
> >> >> > ping 10.0.2.15 address but not 10.0.2.179.
> >> >> >
> >> >> > Regards,
> >> >> >
> >> >> > --
> >> >> > Charles Moulliard
> >> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> >> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Charles Moulliard
> >> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >>
> >> >
> >> >
> >> >
> >> > --
> >> > Charles Moulliard
> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >
> >> >
> >> >
> >>
> >>
> >> --
> >> Charles Moulliard
> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>
> >
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >
> >
> >
> 
> 
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
Problem fixed. I can connect using SSH to the IP address of the DevCloud VM
: 192.168.56.2

On Thu, Oct 25, 2012 at 8:43 AM, Rohit Yadav <ro...@citrix.com> wrote:

>
> On 24-Oct-2012, at 6:58 PM, Charles Moulliard <ch...@gmail.com> wrote:
>
> > Hi Rohit,
> >
> > I have followed instructions here ((
> >
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup
> )
> > but I cannot ping the DevCloud VM machine at this address 192.168.56.2
> from
> > the machine where VB is running.
>
> The IPs don't matter, the guide uses 192.168.56.x; if you're using
> 192.168.1.x, you've to change all the IPs you will be using as needed.
> Make sure you restart your devcloud.
>
> > Host = LinuxMint running VirtualBox
> >
> > ping 192.168.56.2
> > PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
> > From 192.168.56.1 icmp_seq=1 Destination Host Unreachable
> >
> > ifconfig
> > eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
> >          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
> >          inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
> >          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >          RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
> >          TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
> >          collisions:0 txqueuelen:1000
> >          RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
> >          Interrupt:20 Memory:e9600000-e9620000
> >
> > vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
> >          inet addr:192.168.56.1  Bcast:192.168.56.255  Mask:255.255.255.0
> >          inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
> >          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >          TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
> >          collisions:0 txqueuelen:1000
> >          RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)
> >
> > Guest = DevCloud VM
>
> Looking at your ifconfig, eth0 is 192.168.1.5 and then after religion
> xenbr0 is 192.168.56.2, this is suspicious, something went wrong here.
>
> >
> > After logging using root / password
> >
> > ifconfig -->
> > xenbr0 = 192.168.56.2/255.255.255.0
> > eth0 is not configured
> > eth1 has a MAC address but no IP address
> > xenbr1 has a MAC address but no IP address
> >
> > So something is missing in the config presented at the link ?
>
> I'm not sure, can you recheck your /etc/network/interfaces? And fix eth0,
> xenbr0 as needed.
>
> Probably, Edison can check?
>
> Regards.
>
> >
> > Regards,
> >
> > Charles
> >
> > On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch...@gmail.com>
> wrote:
> >
> >> Hi Rohit,
> >>
> >> Thx for the update.
> >> Additional questions :
> >> - If the machine containing the VB is linked by example to the following
> >> network 192.168.1.x/255.255.255.0 and has access to internet using a
> DHCP
> >> server, do you think that the network to be used for the host only
> adapter
> >> should be 192.168.56.x as defined here (
> >>
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup
> )
> >> ?
> >> - How will it be possible for the DevCloud VM machine to have access to
> >> internet if we use only between VB and cloud machine the host only
> adapter
> >> and not NAT or Bridge adapter as second adapter ?
> >>
> >> There is a missing piece in the wiki page : You should tell to the user
> >> how it should configure the vboxnet0 adapter in VB that we will use with
> >> the host only adapter ! The existing page explains only how to configure
> >> the DevCloud VM (/etc/hosts file)
> >>
> >> Regards,
> >>
> >> Charles
> >>
> >>
> >> On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav <rohit.yadav@citrix.com
> >wrote:
> >>
> >>> I think the bridge mode may not be a good idea, as it may pollute your
> >>> LAN.
> >>> I suggest you try the host-only adapter:
> >>>
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup
> >>>
> >>> Note: this for the latest asf master where we use maven and ant is only
> >>> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you setup
> the
> >>> network in devcloud for host-only adapter).
> >>>
> >>> Regards.
> >>> ________________________________________
> >>> From: Charles Moulliard [ch007m@gmail.com]
> >>> Sent: Wednesday, October 24, 2012 4:34 PM
> >>> To: cloudstack-users@incubator.apache.org
> >>> Subject: Re: CloudStack running in Virtualbox
> >>>
> >>> Damned. By changing the network adapter from NAT to bridge adapter in
> VB,
> >>> I
> >>> cannot anymore connect to the management server from the browser
> running
> >>> in
> >>> the host machine (= ubuntu machine) using localhost or 192.168.1.3 or
> >>> 10.0.2.15 followed by 8080/client
> >>>
> >>> ssh works well from ubuntu to the VB image (CloudStack) like you can
> see
> >>> hereafter
> >>>
> >>> ssh root@192.168.1.3
> >>> root@192.168.1.3's password:
> >>> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
> >>>
> >>> * Documentation:  https://help.ubuntu.com/
> >>>
> >>>  System information as of Wed Oct 24 04:01:34 PDT 2012
> >>>
> >>>  System load:  0.07              Processes:             112
> >>>  Usage of /:   31.3% of 5.57GB   Users logged in:       1
> >>>  Memory usage: 22%               IP address for eth0:   192.168.1.3
> >>>  Swap usage:   0%                IP address for xenbr0: 192.168.1.3
> >>>
> >>>
> >>> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard <ch007m@gmail.com
> >>>> wrote:
> >>>
> >>>> I will change from NAT to bridge adapter.
> >>>> DHCP is configured on the DSL router (= LAN where the machine is
> >>> plugged)
> >>>>
> >>>>
> >>>> On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> >>>> donal.lafferty@citrix.com> wrote:
> >>>>
> >>>>> This seems to explain the problem you are seeing.
> >>>>>
> >>>>> "The disadvantage of NAT mode is that, much like a private network
> >>> behind
> >>>>> a router, the virtual machine is invisible and unreachable from the
> >>> outside
> >>>>> internet; you cannot run a server this way unless you set up port
> >>>>> forwarding (described below)."
> >>>>>
> >>>>> See http://www.virtualbox.org/manual/ch06.html#network_nat
> >>>>>
> >>>>>
> >>>>> If you want to stick with NAT, you should create a VM in the virtual
> >>> box
> >>>>> install that can run your browser.  Alternatively, use a bridge
> >>> adapter.
> >>>>>
> >>>>>
> >>>>> BTW, where is the DHCP daemon that is allocating addresses to your
> VMs?
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> -----Original Message-----
> >>>>> From: Charles Moulliard [mailto:ch007m@gmail.com]
> >>>>> Sent: 24 October 2012 10:37
> >>>>> To: cloudstack-users@incubator.apache.org
> >>>>> Subject: Re: CloudStack running in Virtualbox
> >>>>>
> >>>>> Are you connecting from the host running virtual box to the VM
> running
> >>> the
> >>>>> management server over SSH or HTTP?
> >>>>>> No.
> >>>>>
> >>>>> 10.0.2.50 = VirtualBox IP address
> >>>>> 10.0.2.15 = CloudStack management server
> >>>>> 10.0.2.179 = an instance created using the console (
> >>>>> http://localhost:8080/client/). I can connect to the web console
> from
> >>> the
> >>>>> ubuntu machine where VirtualBox has been installed and running the
> >>> image
> >>>>> CloudStack
> >>>>>
> >>>>> I cannot connect to the management server using address
> >>>>> http://10.0.2.15:8080/client
> >>>>>
> >>>>> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> >>>>> <do...@citrix.com>wrote:
> >>>>>
> >>>>>> Hi Charles,
> >>>>>>
> >>>>>> Need more information.
> >>>>>>
> >>>>>> Are you connecting from the host running virtual box to the VM
> >>> running
> >>>>> the
> >>>>>> management server over SSH or HTTP?
> >>>>>>
> >>>>>> For HTTP, AFAIK you not to include the port and virtual path.  E.g.
> >>>>>> http://10.0.2.179:8080/client
> >>>>>>
> >>>>>> Also, can you confirm what IP addresses you have?  10.0.2.50 seems
> >>> to be
> >>>>>> the VirtualBox gateway and 10.0.2.179 the management server.  So
> >>> what is
> >>>>>> 10.0.2.15?
> >>>>>>
> >>>>>> DL
> >>>>>>
> >>>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Charles Moulliard [mailto:ch007m@gmail.com]
> >>>>>> Sent: 24 October 2012 09:49
> >>>>>> To: cloudstack-users@incubator.apache.org
> >>>>>> Subject: CloudStack running in Virtualbox
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> Hi. I have installed successfully the following image in virtualbox
> (
> >>>>>> http://download.cloud.com/templates/devcloud/DevCloud.ova) and
> >>> created
> >>>>> an
> >>>>>> instance. Unfortunately, I cannot connect to it with its IP address
> >>>>>> (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
> >>>>>> (10.0.2.50). Is there something else to configure ?
> >>>>>> When I log to the Unix machine (where CloudStack has been deployed),
> >>> I
> >>>>> can
> >>>>>> ping 10.0.2.15 address but not 10.0.2.179.
> >>>>>>
> >>>>>> Regards,
> >>>>>>
> >>>>>> --
> >>>>>> Charles Moulliard
> >>>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Charles Moulliard
> >>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> Charles Moulliard
> >>>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> Charles Moulliard
> >>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>
> >>
> >>
> >>
> >> --
> >> Charles Moulliard
> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>
> >>
> >>
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>
>


-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Rohit Yadav <ro...@citrix.com>.
On 24-Oct-2012, at 6:58 PM, Charles Moulliard <ch...@gmail.com> wrote:

> Hi Rohit,
> 
> I have followed instructions here ((
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup)
> but I cannot ping the DevCloud VM machine at this address 192.168.56.2 from
> the machine where VB is running.

The IPs don't matter, the guide uses 192.168.56.x; if you're using 192.168.1.x, you've to change all the IPs you will be using as needed.
Make sure you restart your devcloud.

> Host = LinuxMint running VirtualBox
> 
> ping 192.168.56.2
> PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
> From 192.168.56.1 icmp_seq=1 Destination Host Unreachable
> 
> ifconfig
> eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
>          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
>          inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
>          Interrupt:20 Memory:e9600000-e9620000
> 
> vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
>          inet addr:192.168.56.1  Bcast:192.168.56.255  Mask:255.255.255.0
>          inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)
> 
> Guest = DevCloud VM

Looking at your ifconfig, eth0 is 192.168.1.5 and then after religion xenbr0 is 192.168.56.2, this is suspicious, something went wrong here.

> 
> After logging using root / password
> 
> ifconfig -->
> xenbr0 = 192.168.56.2/255.255.255.0
> eth0 is not configured
> eth1 has a MAC address but no IP address
> xenbr1 has a MAC address but no IP address
> 
> So something is missing in the config presented at the link ?

I'm not sure, can you recheck your /etc/network/interfaces? And fix eth0, xenbr0 as needed.

Probably, Edison can check?

Regards.

> 
> Regards,
> 
> Charles
> 
> On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch...@gmail.com> wrote:
> 
>> Hi Rohit,
>> 
>> Thx for the update.
>> Additional questions :
>> - If the machine containing the VB is linked by example to the following
>> network 192.168.1.x/255.255.255.0 and has access to internet using a DHCP
>> server, do you think that the network to be used for the host only adapter
>> should be 192.168.56.x as defined here (
>> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup)
>> ?
>> - How will it be possible for the DevCloud VM machine to have access to
>> internet if we use only between VB and cloud machine the host only adapter
>> and not NAT or Bridge adapter as second adapter ?
>> 
>> There is a missing piece in the wiki page : You should tell to the user
>> how it should configure the vboxnet0 adapter in VB that we will use with
>> the host only adapter ! The existing page explains only how to configure
>> the DevCloud VM (/etc/hosts file)
>> 
>> Regards,
>> 
>> Charles
>> 
>> 
>> On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav <ro...@citrix.com>wrote:
>> 
>>> I think the bridge mode may not be a good idea, as it may pollute your
>>> LAN.
>>> I suggest you try the host-only adapter:
>>> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup
>>> 
>>> Note: this for the latest asf master where we use maven and ant is only
>>> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you setup the
>>> network in devcloud for host-only adapter).
>>> 
>>> Regards.
>>> ________________________________________
>>> From: Charles Moulliard [ch007m@gmail.com]
>>> Sent: Wednesday, October 24, 2012 4:34 PM
>>> To: cloudstack-users@incubator.apache.org
>>> Subject: Re: CloudStack running in Virtualbox
>>> 
>>> Damned. By changing the network adapter from NAT to bridge adapter in VB,
>>> I
>>> cannot anymore connect to the management server from the browser running
>>> in
>>> the host machine (= ubuntu machine) using localhost or 192.168.1.3 or
>>> 10.0.2.15 followed by 8080/client
>>> 
>>> ssh works well from ubuntu to the VB image (CloudStack) like you can see
>>> hereafter
>>> 
>>> ssh root@192.168.1.3
>>> root@192.168.1.3's password:
>>> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
>>> 
>>> * Documentation:  https://help.ubuntu.com/
>>> 
>>>  System information as of Wed Oct 24 04:01:34 PDT 2012
>>> 
>>>  System load:  0.07              Processes:             112
>>>  Usage of /:   31.3% of 5.57GB   Users logged in:       1
>>>  Memory usage: 22%               IP address for eth0:   192.168.1.3
>>>  Swap usage:   0%                IP address for xenbr0: 192.168.1.3
>>> 
>>> 
>>> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard <ch007m@gmail.com
>>>> wrote:
>>> 
>>>> I will change from NAT to bridge adapter.
>>>> DHCP is configured on the DSL router (= LAN where the machine is
>>> plugged)
>>>> 
>>>> 
>>>> On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
>>>> donal.lafferty@citrix.com> wrote:
>>>> 
>>>>> This seems to explain the problem you are seeing.
>>>>> 
>>>>> "The disadvantage of NAT mode is that, much like a private network
>>> behind
>>>>> a router, the virtual machine is invisible and unreachable from the
>>> outside
>>>>> internet; you cannot run a server this way unless you set up port
>>>>> forwarding (described below)."
>>>>> 
>>>>> See http://www.virtualbox.org/manual/ch06.html#network_nat
>>>>> 
>>>>> 
>>>>> If you want to stick with NAT, you should create a VM in the virtual
>>> box
>>>>> install that can run your browser.  Alternatively, use a bridge
>>> adapter.
>>>>> 
>>>>> 
>>>>> BTW, where is the DHCP daemon that is allocating addresses to your VMs?
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> -----Original Message-----
>>>>> From: Charles Moulliard [mailto:ch007m@gmail.com]
>>>>> Sent: 24 October 2012 10:37
>>>>> To: cloudstack-users@incubator.apache.org
>>>>> Subject: Re: CloudStack running in Virtualbox
>>>>> 
>>>>> Are you connecting from the host running virtual box to the VM running
>>> the
>>>>> management server over SSH or HTTP?
>>>>>> No.
>>>>> 
>>>>> 10.0.2.50 = VirtualBox IP address
>>>>> 10.0.2.15 = CloudStack management server
>>>>> 10.0.2.179 = an instance created using the console (
>>>>> http://localhost:8080/client/). I can connect to the web console from
>>> the
>>>>> ubuntu machine where VirtualBox has been installed and running the
>>> image
>>>>> CloudStack
>>>>> 
>>>>> I cannot connect to the management server using address
>>>>> http://10.0.2.15:8080/client
>>>>> 
>>>>> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
>>>>> <do...@citrix.com>wrote:
>>>>> 
>>>>>> Hi Charles,
>>>>>> 
>>>>>> Need more information.
>>>>>> 
>>>>>> Are you connecting from the host running virtual box to the VM
>>> running
>>>>> the
>>>>>> management server over SSH or HTTP?
>>>>>> 
>>>>>> For HTTP, AFAIK you not to include the port and virtual path.  E.g.
>>>>>> http://10.0.2.179:8080/client
>>>>>> 
>>>>>> Also, can you confirm what IP addresses you have?  10.0.2.50 seems
>>> to be
>>>>>> the VirtualBox gateway and 10.0.2.179 the management server.  So
>>> what is
>>>>>> 10.0.2.15?
>>>>>> 
>>>>>> DL
>>>>>> 
>>>>>> 
>>>>>> -----Original Message-----
>>>>>> From: Charles Moulliard [mailto:ch007m@gmail.com]
>>>>>> Sent: 24 October 2012 09:49
>>>>>> To: cloudstack-users@incubator.apache.org
>>>>>> Subject: CloudStack running in Virtualbox
>>>>>> 
>>>>>> Hi,
>>>>>> 
>>>>>> Hi. I have installed successfully the following image in virtualbox (
>>>>>> http://download.cloud.com/templates/devcloud/DevCloud.ova) and
>>> created
>>>>> an
>>>>>> instance. Unfortunately, I cannot connect to it with its IP address
>>>>>> (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
>>>>>> (10.0.2.50). Is there something else to configure ?
>>>>>> When I log to the Unix machine (where CloudStack has been deployed),
>>> I
>>>>> can
>>>>>> ping 10.0.2.15 address but not 10.0.2.179.
>>>>>> 
>>>>>> Regards,
>>>>>> 
>>>>>> --
>>>>>> Charles Moulliard
>>>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> --
>>>>> Charles Moulliard
>>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>>>> 
>>>> 
>>>> 
>>>> 
>>>> --
>>>> Charles Moulliard
>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>>> 
>>>> 
>>>> 
>>> 
>>> 
>>> --
>>> Charles Moulliard
>>> Apache Committer / Sr. Enterprise Architect (RedHat)
>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>> 
>> 
>> 
>> 
>> --
>> Charles Moulliard
>> Apache Committer / Sr. Enterprise Architect (RedHat)
>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>> 
>> 
>> 
> 
> 
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com


Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
Hi Rohit,

I have followed instructions here ((
https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup)
but I cannot ping the DevCloud VM machine at this address 192.168.56.2 from
the machine where VB is running.

Host = LinuxMint running VirtualBox

ping 192.168.56.2
PING 192.168.56.2 (192.168.56.2) 56(84) bytes of data.
>From 192.168.56.1 icmp_seq=1 Destination Host Unreachable

 ifconfig
eth0      Link encap:Ethernet  HWaddr 5c:26:0a:02:87:e9
          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::5e26:aff:fe02:87e9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1464812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:804617 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2152292686 (2.1 GB)  TX bytes:60443043 (60.4 MB)
          Interrupt:20 Memory:e9600000-e9620000

vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00
          inet addr:192.168.56.1  Bcast:192.168.56.255  Mask:255.255.255.0
          inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:24294 (24.2 KB)

Guest = DevCloud VM

After logging using root / password

ifconfig -->
xenbr0 = 192.168.56.2/255.255.255.0
eth0 is not configured
eth1 has a MAC address but no IP address
xenbr1 has a MAC address but no IP address

So something is missing in the config presented at the link ?

Regards,

Charles

On Wed, Oct 24, 2012 at 2:24 PM, Charles Moulliard <ch...@gmail.com> wrote:

> Hi Rohit,
>
> Thx for the update.
> Additional questions :
> - If the machine containing the VB is linked by example to the following
> network 192.168.1.x/255.255.255.0 and has access to internet using a DHCP
> server, do you think that the network to be used for the host only adapter
> should be 192.168.56.x as defined here (
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup)
> ?
> - How will it be possible for the DevCloud VM machine to have access to
> internet if we use only between VB and cloud machine the host only adapter
> and not NAT or Bridge adapter as second adapter ?
>
> There is a missing piece in the wiki page : You should tell to the user
> how it should configure the vboxnet0 adapter in VB that we will use with
> the host only adapter ! The existing page explains only how to configure
> the DevCloud VM (/etc/hosts file)
>
> Regards,
>
> Charles
>
>
> On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav <ro...@citrix.com>wrote:
>
>> I think the bridge mode may not be a good idea, as it may pollute your
>> LAN.
>> I suggest you try the host-only adapter:
>> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup
>>
>> Note: this for the latest asf master where we use maven and ant is only
>> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you setup the
>> network in devcloud for host-only adapter).
>>
>> Regards.
>> ________________________________________
>> From: Charles Moulliard [ch007m@gmail.com]
>> Sent: Wednesday, October 24, 2012 4:34 PM
>> To: cloudstack-users@incubator.apache.org
>> Subject: Re: CloudStack running in Virtualbox
>>
>> Damned. By changing the network adapter from NAT to bridge adapter in VB,
>> I
>> cannot anymore connect to the management server from the browser running
>> in
>> the host machine (= ubuntu machine) using localhost or 192.168.1.3 or
>> 10.0.2.15 followed by 8080/client
>>
>> ssh works well from ubuntu to the VB image (CloudStack) like you can see
>> hereafter
>>
>> ssh root@192.168.1.3
>> root@192.168.1.3's password:
>> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
>>
>>  * Documentation:  https://help.ubuntu.com/
>>
>>   System information as of Wed Oct 24 04:01:34 PDT 2012
>>
>>   System load:  0.07              Processes:             112
>>   Usage of /:   31.3% of 5.57GB   Users logged in:       1
>>   Memory usage: 22%               IP address for eth0:   192.168.1.3
>>   Swap usage:   0%                IP address for xenbr0: 192.168.1.3
>>
>>
>> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard <ch007m@gmail.com
>> >wrote:
>>
>> > I will change from NAT to bridge adapter.
>> > DHCP is configured on the DSL router (= LAN where the machine is
>> plugged)
>> >
>> >
>> > On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
>> > donal.lafferty@citrix.com> wrote:
>> >
>> >> This seems to explain the problem you are seeing.
>> >>
>> >> "The disadvantage of NAT mode is that, much like a private network
>> behind
>> >> a router, the virtual machine is invisible and unreachable from the
>> outside
>> >> internet; you cannot run a server this way unless you set up port
>> >> forwarding (described below)."
>> >>
>> >> See http://www.virtualbox.org/manual/ch06.html#network_nat
>> >>
>> >>
>> >> If you want to stick with NAT, you should create a VM in the virtual
>> box
>> >> install that can run your browser.  Alternatively, use a bridge
>> adapter.
>> >>
>> >>
>> >> BTW, where is the DHCP daemon that is allocating addresses to your VMs?
>> >>
>> >>
>> >>
>> >>
>> >> -----Original Message-----
>> >> From: Charles Moulliard [mailto:ch007m@gmail.com]
>> >> Sent: 24 October 2012 10:37
>> >> To: cloudstack-users@incubator.apache.org
>> >> Subject: Re: CloudStack running in Virtualbox
>> >>
>> >> Are you connecting from the host running virtual box to the VM running
>> the
>> >> management server over SSH or HTTP?
>> >> > No.
>> >>
>> >>  10.0.2.50 = VirtualBox IP address
>> >>  10.0.2.15 = CloudStack management server
>> >>  10.0.2.179 = an instance created using the console (
>> >> http://localhost:8080/client/). I can connect to the web console from
>> the
>> >> ubuntu machine where VirtualBox has been installed and running the
>> image
>> >> CloudStack
>> >>
>> >> I cannot connect to the management server using address
>> >> http://10.0.2.15:8080/client
>> >>
>> >> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
>> >> <do...@citrix.com>wrote:
>> >>
>> >> > Hi Charles,
>> >> >
>> >> > Need more information.
>> >> >
>> >> > Are you connecting from the host running virtual box to the VM
>> running
>> >> the
>> >> > management server over SSH or HTTP?
>> >> >
>> >> > For HTTP, AFAIK you not to include the port and virtual path.  E.g.
>> >> > http://10.0.2.179:8080/client
>> >> >
>> >> > Also, can you confirm what IP addresses you have?  10.0.2.50 seems
>> to be
>> >> > the VirtualBox gateway and 10.0.2.179 the management server.  So
>> what is
>> >> > 10.0.2.15?
>> >> >
>> >> > DL
>> >> >
>> >> >
>> >> > -----Original Message-----
>> >> > From: Charles Moulliard [mailto:ch007m@gmail.com]
>> >> > Sent: 24 October 2012 09:49
>> >> > To: cloudstack-users@incubator.apache.org
>> >> > Subject: CloudStack running in Virtualbox
>> >> >
>> >> > Hi,
>> >> >
>> >> > Hi. I have installed successfully the following image in virtualbox (
>> >> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and
>> created
>> >> an
>> >> > instance. Unfortunately, I cannot connect to it with its IP address
>> >> > (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
>> >> > (10.0.2.50). Is there something else to configure ?
>> >> > When I log to the Unix machine (where CloudStack has been deployed),
>> I
>> >> can
>> >> > ping 10.0.2.15 address but not 10.0.2.179.
>> >> >
>> >> > Regards,
>> >> >
>> >> > --
>> >> > Charles Moulliard
>> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
>> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Charles Moulliard
>> >> Apache Committer / Sr. Enterprise Architect (RedHat)
>> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>> >>
>> >
>> >
>> >
>> > --
>> > Charles Moulliard
>> > Apache Committer / Sr. Enterprise Architect (RedHat)
>> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>> >
>> >
>> >
>>
>>
>> --
>> Charles Moulliard
>> Apache Committer / Sr. Enterprise Architect (RedHat)
>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>
>
>
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>
>
>


-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
Hi Rohit,

Thx for the update.
Additional questions :
- If the machine containing the VB is linked by example to the following
network 192.168.1.x/255.255.255.0 and has access to internet using a DHCP
server, do you think that the network to be used for the host only adapter
should be 192.168.56.x as defined here (
https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup)
?
- How will it be possible for the DevCloud VM machine to have access to
internet if we use only between VB and cloud machine the host only adapter
and not NAT or Bridge adapter as second adapter ?

There is a missing piece in the wiki page : You should tell to the user how
it should configure the vboxnet0 adapter in VB that we will use with the
host only adapter ! The existing page explains only how to configure the
DevCloud VM (/etc/hosts file)

Regards,

Charles


On Wed, Oct 24, 2012 at 1:37 PM, Rohit Yadav <ro...@citrix.com> wrote:

> I think the bridge mode may not be a good idea, as it may pollute your LAN.
> I suggest you try the host-only adapter:
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup
>
> Note: this for the latest asf master where we use maven and ant is only
> used till 4.0 (checkout 4.0 branch and do ant <stuff> after you setup the
> network in devcloud for host-only adapter).
>
> Regards.
> ________________________________________
> From: Charles Moulliard [ch007m@gmail.com]
> Sent: Wednesday, October 24, 2012 4:34 PM
> To: cloudstack-users@incubator.apache.org
> Subject: Re: CloudStack running in Virtualbox
>
> Damned. By changing the network adapter from NAT to bridge adapter in VB, I
> cannot anymore connect to the management server from the browser running in
> the host machine (= ubuntu machine) using localhost or 192.168.1.3 or
> 10.0.2.15 followed by 8080/client
>
> ssh works well from ubuntu to the VB image (CloudStack) like you can see
> hereafter
>
> ssh root@192.168.1.3
> root@192.168.1.3's password:
> Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
>
>  * Documentation:  https://help.ubuntu.com/
>
>   System information as of Wed Oct 24 04:01:34 PDT 2012
>
>   System load:  0.07              Processes:             112
>   Usage of /:   31.3% of 5.57GB   Users logged in:       1
>   Memory usage: 22%               IP address for eth0:   192.168.1.3
>   Swap usage:   0%                IP address for xenbr0: 192.168.1.3
>
>
> On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard <ch007m@gmail.com
> >wrote:
>
> > I will change from NAT to bridge adapter.
> > DHCP is configured on the DSL router (= LAN where the machine is plugged)
> >
> >
> > On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> > donal.lafferty@citrix.com> wrote:
> >
> >> This seems to explain the problem you are seeing.
> >>
> >> "The disadvantage of NAT mode is that, much like a private network
> behind
> >> a router, the virtual machine is invisible and unreachable from the
> outside
> >> internet; you cannot run a server this way unless you set up port
> >> forwarding (described below)."
> >>
> >> See http://www.virtualbox.org/manual/ch06.html#network_nat
> >>
> >>
> >> If you want to stick with NAT, you should create a VM in the virtual box
> >> install that can run your browser.  Alternatively, use a bridge adapter.
> >>
> >>
> >> BTW, where is the DHCP daemon that is allocating addresses to your VMs?
> >>
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: Charles Moulliard [mailto:ch007m@gmail.com]
> >> Sent: 24 October 2012 10:37
> >> To: cloudstack-users@incubator.apache.org
> >> Subject: Re: CloudStack running in Virtualbox
> >>
> >> Are you connecting from the host running virtual box to the VM running
> the
> >> management server over SSH or HTTP?
> >> > No.
> >>
> >>  10.0.2.50 = VirtualBox IP address
> >>  10.0.2.15 = CloudStack management server
> >>  10.0.2.179 = an instance created using the console (
> >> http://localhost:8080/client/). I can connect to the web console from
> the
> >> ubuntu machine where VirtualBox has been installed and running the image
> >> CloudStack
> >>
> >> I cannot connect to the management server using address
> >> http://10.0.2.15:8080/client
> >>
> >> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> >> <do...@citrix.com>wrote:
> >>
> >> > Hi Charles,
> >> >
> >> > Need more information.
> >> >
> >> > Are you connecting from the host running virtual box to the VM running
> >> the
> >> > management server over SSH or HTTP?
> >> >
> >> > For HTTP, AFAIK you not to include the port and virtual path.  E.g.
> >> > http://10.0.2.179:8080/client
> >> >
> >> > Also, can you confirm what IP addresses you have?  10.0.2.50 seems to
> be
> >> > the VirtualBox gateway and 10.0.2.179 the management server.  So what
> is
> >> > 10.0.2.15?
> >> >
> >> > DL
> >> >
> >> >
> >> > -----Original Message-----
> >> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> >> > Sent: 24 October 2012 09:49
> >> > To: cloudstack-users@incubator.apache.org
> >> > Subject: CloudStack running in Virtualbox
> >> >
> >> > Hi,
> >> >
> >> > Hi. I have installed successfully the following image in virtualbox (
> >> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and
> created
> >> an
> >> > instance. Unfortunately, I cannot connect to it with its IP address
> >> > (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
> >> > (10.0.2.50). Is there something else to configure ?
> >> > When I log to the Unix machine (where CloudStack has been deployed), I
> >> can
> >> > ping 10.0.2.15 address but not 10.0.2.179.
> >> >
> >> > Regards,
> >> >
> >> > --
> >> > Charles Moulliard
> >> > Apache Committer / Sr. Enterprise Architect (RedHat)
> >> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >> >
> >>
> >>
> >>
> >> --
> >> Charles Moulliard
> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>
> >
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >
> >
> >
>
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

RE: CloudStack running in Virtualbox

Posted by Rohit Yadav <ro...@citrix.com>.
I think the bridge mode may not be a good idea, as it may pollute your LAN.
I suggest you try the host-only adapter: https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+devcloud+environment+setup

Note: this for the latest asf master where we use maven and ant is only used till 4.0 (checkout 4.0 branch and do ant <stuff> after you setup the network in devcloud for host-only adapter).

Regards.
________________________________________
From: Charles Moulliard [ch007m@gmail.com]
Sent: Wednesday, October 24, 2012 4:34 PM
To: cloudstack-users@incubator.apache.org
Subject: Re: CloudStack running in Virtualbox

Damned. By changing the network adapter from NAT to bridge adapter in VB, I
cannot anymore connect to the management server from the browser running in
the host machine (= ubuntu machine) using localhost or 192.168.1.3 or
10.0.2.15 followed by 8080/client

ssh works well from ubuntu to the VB image (CloudStack) like you can see
hereafter

ssh root@192.168.1.3
root@192.168.1.3's password:
Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)

 * Documentation:  https://help.ubuntu.com/

  System information as of Wed Oct 24 04:01:34 PDT 2012

  System load:  0.07              Processes:             112
  Usage of /:   31.3% of 5.57GB   Users logged in:       1
  Memory usage: 22%               IP address for eth0:   192.168.1.3
  Swap usage:   0%                IP address for xenbr0: 192.168.1.3


On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard <ch...@gmail.com>wrote:

> I will change from NAT to bridge adapter.
> DHCP is configured on the DSL router (= LAN where the machine is plugged)
>
>
> On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> donal.lafferty@citrix.com> wrote:
>
>> This seems to explain the problem you are seeing.
>>
>> "The disadvantage of NAT mode is that, much like a private network behind
>> a router, the virtual machine is invisible and unreachable from the outside
>> internet; you cannot run a server this way unless you set up port
>> forwarding (described below)."
>>
>> See http://www.virtualbox.org/manual/ch06.html#network_nat
>>
>>
>> If you want to stick with NAT, you should create a VM in the virtual box
>> install that can run your browser.  Alternatively, use a bridge adapter.
>>
>>
>> BTW, where is the DHCP daemon that is allocating addresses to your VMs?
>>
>>
>>
>>
>> -----Original Message-----
>> From: Charles Moulliard [mailto:ch007m@gmail.com]
>> Sent: 24 October 2012 10:37
>> To: cloudstack-users@incubator.apache.org
>> Subject: Re: CloudStack running in Virtualbox
>>
>> Are you connecting from the host running virtual box to the VM running the
>> management server over SSH or HTTP?
>> > No.
>>
>>  10.0.2.50 = VirtualBox IP address
>>  10.0.2.15 = CloudStack management server
>>  10.0.2.179 = an instance created using the console (
>> http://localhost:8080/client/). I can connect to the web console from the
>> ubuntu machine where VirtualBox has been installed and running the image
>> CloudStack
>>
>> I cannot connect to the management server using address
>> http://10.0.2.15:8080/client
>>
>> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
>> <do...@citrix.com>wrote:
>>
>> > Hi Charles,
>> >
>> > Need more information.
>> >
>> > Are you connecting from the host running virtual box to the VM running
>> the
>> > management server over SSH or HTTP?
>> >
>> > For HTTP, AFAIK you not to include the port and virtual path.  E.g.
>> > http://10.0.2.179:8080/client
>> >
>> > Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be
>> > the VirtualBox gateway and 10.0.2.179 the management server.  So what is
>> > 10.0.2.15?
>> >
>> > DL
>> >
>> >
>> > -----Original Message-----
>> > From: Charles Moulliard [mailto:ch007m@gmail.com]
>> > Sent: 24 October 2012 09:49
>> > To: cloudstack-users@incubator.apache.org
>> > Subject: CloudStack running in Virtualbox
>> >
>> > Hi,
>> >
>> > Hi. I have installed successfully the following image in virtualbox (
>> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and created
>> an
>> > instance. Unfortunately, I cannot connect to it with its IP address
>> > (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
>> > (10.0.2.50). Is there something else to configure ?
>> > When I log to the Unix machine (where CloudStack has been deployed), I
>> can
>> > ping 10.0.2.15 address but not 10.0.2.179.
>> >
>> > Regards,
>> >
>> > --
>> > Charles Moulliard
>> > Apache Committer / Sr. Enterprise Architect (RedHat)
>> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>> >
>>
>>
>>
>> --
>> Charles Moulliard
>> Apache Committer / Sr. Enterprise Architect (RedHat)
>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>
>
>
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>
>
>


--
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
Damned. By changing the network adapter from NAT to bridge adapter in VB, I
cannot anymore connect to the management server from the browser running in
the host machine (= ubuntu machine) using localhost or 192.168.1.3 or
10.0.2.15 followed by 8080/client

ssh works well from ubuntu to the VB image (CloudStack) like you can see
hereafter

ssh root@192.168.1.3
root@192.168.1.3's password:
Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)

 * Documentation:  https://help.ubuntu.com/

  System information as of Wed Oct 24 04:01:34 PDT 2012

  System load:  0.07              Processes:             112
  Usage of /:   31.3% of 5.57GB   Users logged in:       1
  Memory usage: 22%               IP address for eth0:   192.168.1.3
  Swap usage:   0%                IP address for xenbr0: 192.168.1.3


On Wed, Oct 24, 2012 at 12:47 PM, Charles Moulliard <ch...@gmail.com>wrote:

> I will change from NAT to bridge adapter.
> DHCP is configured on the DSL router (= LAN where the machine is plugged)
>
>
> On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty <
> donal.lafferty@citrix.com> wrote:
>
>> This seems to explain the problem you are seeing.
>>
>> "The disadvantage of NAT mode is that, much like a private network behind
>> a router, the virtual machine is invisible and unreachable from the outside
>> internet; you cannot run a server this way unless you set up port
>> forwarding (described below)."
>>
>> See http://www.virtualbox.org/manual/ch06.html#network_nat
>>
>>
>> If you want to stick with NAT, you should create a VM in the virtual box
>> install that can run your browser.  Alternatively, use a bridge adapter.
>>
>>
>> BTW, where is the DHCP daemon that is allocating addresses to your VMs?
>>
>>
>>
>>
>> -----Original Message-----
>> From: Charles Moulliard [mailto:ch007m@gmail.com]
>> Sent: 24 October 2012 10:37
>> To: cloudstack-users@incubator.apache.org
>> Subject: Re: CloudStack running in Virtualbox
>>
>> Are you connecting from the host running virtual box to the VM running the
>> management server over SSH or HTTP?
>> > No.
>>
>>  10.0.2.50 = VirtualBox IP address
>>  10.0.2.15 = CloudStack management server
>>  10.0.2.179 = an instance created using the console (
>> http://localhost:8080/client/). I can connect to the web console from the
>> ubuntu machine where VirtualBox has been installed and running the image
>> CloudStack
>>
>> I cannot connect to the management server using address
>> http://10.0.2.15:8080/client
>>
>> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
>> <do...@citrix.com>wrote:
>>
>> > Hi Charles,
>> >
>> > Need more information.
>> >
>> > Are you connecting from the host running virtual box to the VM running
>> the
>> > management server over SSH or HTTP?
>> >
>> > For HTTP, AFAIK you not to include the port and virtual path.  E.g.
>> > http://10.0.2.179:8080/client
>> >
>> > Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be
>> > the VirtualBox gateway and 10.0.2.179 the management server.  So what is
>> > 10.0.2.15?
>> >
>> > DL
>> >
>> >
>> > -----Original Message-----
>> > From: Charles Moulliard [mailto:ch007m@gmail.com]
>> > Sent: 24 October 2012 09:49
>> > To: cloudstack-users@incubator.apache.org
>> > Subject: CloudStack running in Virtualbox
>> >
>> > Hi,
>> >
>> > Hi. I have installed successfully the following image in virtualbox (
>> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and created
>> an
>> > instance. Unfortunately, I cannot connect to it with its IP address
>> > (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
>> > (10.0.2.50). Is there something else to configure ?
>> > When I log to the Unix machine (where CloudStack has been deployed), I
>> can
>> > ping 10.0.2.15 address but not 10.0.2.179.
>> >
>> > Regards,
>> >
>> > --
>> > Charles Moulliard
>> > Apache Committer / Sr. Enterprise Architect (RedHat)
>> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>> >
>>
>>
>>
>> --
>> Charles Moulliard
>> Apache Committer / Sr. Enterprise Architect (RedHat)
>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>>
>
>
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>
>
>


-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
I will change from NAT to bridge adapter.
DHCP is configured on the DSL router (= LAN where the machine is plugged)

On Wed, Oct 24, 2012 at 12:18 PM, Donal Lafferty
<do...@citrix.com>wrote:

> This seems to explain the problem you are seeing.
>
> "The disadvantage of NAT mode is that, much like a private network behind
> a router, the virtual machine is invisible and unreachable from the outside
> internet; you cannot run a server this way unless you set up port
> forwarding (described below)."
>
> See http://www.virtualbox.org/manual/ch06.html#network_nat
>
>
> If you want to stick with NAT, you should create a VM in the virtual box
> install that can run your browser.  Alternatively, use a bridge adapter.
>
>
> BTW, where is the DHCP daemon that is allocating addresses to your VMs?
>
>
>
>
> -----Original Message-----
> From: Charles Moulliard [mailto:ch007m@gmail.com]
> Sent: 24 October 2012 10:37
> To: cloudstack-users@incubator.apache.org
> Subject: Re: CloudStack running in Virtualbox
>
> Are you connecting from the host running virtual box to the VM running the
> management server over SSH or HTTP?
> > No.
>
>  10.0.2.50 = VirtualBox IP address
>  10.0.2.15 = CloudStack management server
>  10.0.2.179 = an instance created using the console (
> http://localhost:8080/client/). I can connect to the web console from the
> ubuntu machine where VirtualBox has been installed and running the image
> CloudStack
>
> I cannot connect to the management server using address
> http://10.0.2.15:8080/client
>
> On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
> <do...@citrix.com>wrote:
>
> > Hi Charles,
> >
> > Need more information.
> >
> > Are you connecting from the host running virtual box to the VM running
> the
> > management server over SSH or HTTP?
> >
> > For HTTP, AFAIK you not to include the port and virtual path.  E.g.
> > http://10.0.2.179:8080/client
> >
> > Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be
> > the VirtualBox gateway and 10.0.2.179 the management server.  So what is
> > 10.0.2.15?
> >
> > DL
> >
> >
> > -----Original Message-----
> > From: Charles Moulliard [mailto:ch007m@gmail.com]
> > Sent: 24 October 2012 09:49
> > To: cloudstack-users@incubator.apache.org
> > Subject: CloudStack running in Virtualbox
> >
> > Hi,
> >
> > Hi. I have installed successfully the following image in virtualbox (
> > http://download.cloud.com/templates/devcloud/DevCloud.ova) and created
> an
> > instance. Unfortunately, I cannot connect to it with its IP address
> > (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
> > (10.0.2.50). Is there something else to configure ?
> > When I log to the Unix machine (where CloudStack has been deployed), I
> can
> > ping 10.0.2.15 address but not 10.0.2.179.
> >
> > Regards,
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >
>
>
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

RE: CloudStack running in Virtualbox

Posted by Donal Lafferty <do...@citrix.com>.
This seems to explain the problem you are seeing.

"The disadvantage of NAT mode is that, much like a private network behind a router, the virtual machine is invisible and unreachable from the outside internet; you cannot run a server this way unless you set up port forwarding (described below)."

See http://www.virtualbox.org/manual/ch06.html#network_nat


If you want to stick with NAT, you should create a VM in the virtual box install that can run your browser.  Alternatively, use a bridge adapter.


BTW, where is the DHCP daemon that is allocating addresses to your VMs?




-----Original Message-----
From: Charles Moulliard [mailto:ch007m@gmail.com] 
Sent: 24 October 2012 10:37
To: cloudstack-users@incubator.apache.org
Subject: Re: CloudStack running in Virtualbox

Are you connecting from the host running virtual box to the VM running the
management server over SSH or HTTP?
> No.

 10.0.2.50 = VirtualBox IP address
 10.0.2.15 = CloudStack management server
 10.0.2.179 = an instance created using the console (
http://localhost:8080/client/). I can connect to the web console from the
ubuntu machine where VirtualBox has been installed and running the image
CloudStack

I cannot connect to the management server using address
http://10.0.2.15:8080/client

On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
<do...@citrix.com>wrote:

> Hi Charles,
>
> Need more information.
>
> Are you connecting from the host running virtual box to the VM running the
> management server over SSH or HTTP?
>
> For HTTP, AFAIK you not to include the port and virtual path.  E.g.
> http://10.0.2.179:8080/client
>
> Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be
> the VirtualBox gateway and 10.0.2.179 the management server.  So what is
> 10.0.2.15?
>
> DL
>
>
> -----Original Message-----
> From: Charles Moulliard [mailto:ch007m@gmail.com]
> Sent: 24 October 2012 09:49
> To: cloudstack-users@incubator.apache.org
> Subject: CloudStack running in Virtualbox
>
> Hi,
>
> Hi. I have installed successfully the following image in virtualbox (
> http://download.cloud.com/templates/devcloud/DevCloud.ova) and created an
> instance. Unfortunately, I cannot connect to it with its IP address
> (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
> (10.0.2.50). Is there something else to configure ?
> When I log to the Unix machine (where CloudStack has been deployed), I can
> ping 10.0.2.15 address but not 10.0.2.179.
>
> Regards,
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Re: CloudStack running in Virtualbox

Posted by Charles Moulliard <ch...@gmail.com>.
Are you connecting from the host running virtual box to the VM running the
management server over SSH or HTTP?
> No.

 10.0.2.50 = VirtualBox IP address
 10.0.2.15 = CloudStack management server
 10.0.2.179 = an instance created using the console (
http://localhost:8080/client/). I can connect to the web console from the
ubuntu machine where VirtualBox has been installed and running the image
CloudStack

I cannot connect to the management server using address
http://10.0.2.15:8080/client

On Wed, Oct 24, 2012 at 11:07 AM, Donal Lafferty
<do...@citrix.com>wrote:

> Hi Charles,
>
> Need more information.
>
> Are you connecting from the host running virtual box to the VM running the
> management server over SSH or HTTP?
>
> For HTTP, AFAIK you not to include the port and virtual path.  E.g.
> http://10.0.2.179:8080/client
>
> Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be
> the VirtualBox gateway and 10.0.2.179 the management server.  So what is
> 10.0.2.15?
>
> DL
>
>
> -----Original Message-----
> From: Charles Moulliard [mailto:ch007m@gmail.com]
> Sent: 24 October 2012 09:49
> To: cloudstack-users@incubator.apache.org
> Subject: CloudStack running in Virtualbox
>
> Hi,
>
> Hi. I have installed successfully the following image in virtualbox (
> http://download.cloud.com/templates/devcloud/DevCloud.ova) and created an
> instance. Unfortunately, I cannot connect to it with its IP address
> (10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
> (10.0.2.50). Is there something else to configure ?
> When I log to the Unix machine (where CloudStack has been deployed), I can
> ping 10.0.2.15 address but not 10.0.2.179.
>
> Regards,
>
> --
> Charles Moulliard
> Apache Committer / Sr. Enterprise Architect (RedHat)
> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>



-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

RE: CloudStack running in Virtualbox

Posted by Donal Lafferty <do...@citrix.com>.
Hi Charles,

Need more information.

Are you connecting from the host running virtual box to the VM running the management server over SSH or HTTP?

For HTTP, AFAIK you not to include the port and virtual path.  E.g. http://10.0.2.179:8080/client

Also, can you confirm what IP addresses you have?  10.0.2.50 seems to be the VirtualBox gateway and 10.0.2.179 the management server.  So what is 10.0.2.15?

DL


-----Original Message-----
From: Charles Moulliard [mailto:ch007m@gmail.com] 
Sent: 24 October 2012 09:49
To: cloudstack-users@incubator.apache.org
Subject: CloudStack running in Virtualbox

Hi,

Hi. I have installed successfully the following image in virtualbox (
http://download.cloud.com/templates/devcloud/DevCloud.ova) and created an
instance. Unfortunately, I cannot connect to it with its IP address
(10.0.2.179). VirtualBox uses NAT and a host only adapter + vboxnet
(10.0.2.50). Is there something else to configure ?
When I log to the Unix machine (where CloudStack has been deployed), I can
ping 10.0.2.15 address but not 10.0.2.179.

Regards,

-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com