You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@click.apache.org by "Kuhns, John" <jk...@AimNTLS.com> on 2012/06/14 13:43:33 UTC

jQuery-Click IE9 Parsing request failed

I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.

I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....

Thanks,
John

Re: jQuery-Click IE9 Parsing request failed

Posted by Bob Schellink <sa...@gmail.com>.
On 14/06/2012 18:59 PM, Kuhns, John wrote:
> Yes, 2.3 and click-jquery using taconite to update multiple targets. Unless I'm mistaken, you're the owner of that code, although it may be abandoned.

Yeah, initially I wanted an API that hid the Javascript. Over time I've changed my mind and decided 
I quite like JavaScript (especially using jQuery), for enhancing a web page functionality. Hence I 
ended up with this project:
http://code.google.com/a/apache-extras.org/p/ajax4click/

Kind regards

Bob

>
> I have a series of drill-down select boxes that are all related to each other in one way or another and a table that I want to replace when some of the selects are changed. Originally I had everything setup using full page refreshes, couldn't figure out a good way around it without writing tons of code until I stumbled on http://code.google.com/p/click-jquery/. I had everything working great in Chrome, went to test in IE and it blew up. Otherwise it seems to work fine, now that I have a workaround for this issue I'll continue developing/testing.
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 12:36 PM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> I think the example you refer to is using an older version of Click, perhaps 2.2.0? I somehow recall that issue was fixed in Click 2.3.0 but I could be wrong.
>
> Are you seeing the issue with 2.3.0?
>
> regards
>
> Bob
>
> On 14/06/2012 17:56 PM, Kuhns, John wrote:
>> Figured it out. The&amp in the column headers was causing msxml to choke. I wrapped the table HTML in CDATA tags and all seems to be working. Below is the essence of the steps I took:
>>
>> ...
>>        someSelect.addBehavior(new JQBehavior(JQEvent.CHANGE) {
>>            @Override
>>            public ActionResult onAction(Control source, JQEvent event) {
>>                return updateSomeSelect();
>>            }
>>        });
>> ...
>>       private ActionResult updateSomeSelect() {
>>           JQTaconite actionResult = new JQTaconite();
>>           table.onProcess();
>>           StringBuilder sb = new StringBuilder();
>>           sb.append("<![CDATA[");
>>           sb.append(table.toString());
>>           sb.append("]]>");
>>           // get rid of the pagebanner and links, if there
>>           actionResult.remove(".pagebanner");
>>           actionResult.remove(".pagelinks");
>>           // replace the table, the pagebanner and links will be included if configured
>>           actionResult.replace(table, sb.toString());
>>           return actionResult;
>>       }
>>
>> Thanks,
>> John
>>
>> -----Original Message-----
>> From: Kuhns, John [mailto:jkuhns@AimNTLS.com]
>> Sent: Thursday, June 14, 2012 11:30 AM
>> To: user@click.apache.org
>> Subject: RE: jQuery-Click IE9 Parsing request failed
>>
>> Actually, no, this is the example:
>>
>> http://click-jquery.appspot.com/ajax/table-demo.htm
>>
>> I need the jQuery-Click, I want to populate the table via Ajax on a select change, then be able to sort and page with Ajax, too. I've tried a few things with no luck so far, I'll keep trying.
>>
>> Thanks,
>> John
>>
>> -----Original Message-----
>> From: Kuhns, John [mailto:jkuhns@AimNTLS.com]
>> Sent: Thursday, June 14, 2012 10:58 AM
>> To: user@click.apache.org
>> Subject: RE: jQuery-Click IE9 Parsing request failed
>>
>> Hmmm, it works for me too. As I paged through the table yesterday it was throwing up the same parseerror message and then paging. I'll research it more and see if I can find the real problem.
>>
>> -----Original Message-----
>> From: Bob Schellink [mailto:sabob1@gmail.com]
>> Sent: Thursday, June 14, 2012 10:39 AM
>> To: user@click.apache.org
>> Subject: Re: jQuery-Click IE9 Parsing request failed
>>
>> You mean this example?
>> http://click.avoka.com/click-examples/ajax/table/table-ajax.htm
>>
>> Works for me in IE9 though?
>>
>> regards
>>
>> Bob
>>
>> On 14/06/2012 15:51 PM, Kuhns, John wrote:
>>> Right, a click table, and I'm in standards mode:
>>>
>>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN"
>>> "http://www.w3.org/TR/html4/strict.dtd">
>>>
>>> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>>>
>>> Thanks,
>>> John
>>>
>>> -----Original Message-----
>>> From: Bob Schellink [mailto:sabob1@gmail.com]
>>> Sent: Thursday, June 14, 2012 8:37 AM
>>> To: user@click.apache.org
>>> Subject: Re: jQuery-Click IE9 Parsing request failed
>>>
>>> Hi John,
>>>
>>> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>>>
>>> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>>>
>>> regards
>>>
>>> Bob
>>>
>>> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>    wrote:
>>>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>>>
>>>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>>>
>>>> Thanks,
>>>> John
>>
>
>


RE: jQuery-Click IE9 Parsing request failed

Posted by "Kuhns, John" <jk...@AimNTLS.com>.
Yes, 2.3 and click-jquery using taconite to update multiple targets. Unless I'm mistaken, you're the owner of that code, although it may be abandoned.

I have a series of drill-down select boxes that are all related to each other in one way or another and a table that I want to replace when some of the selects are changed. Originally I had everything setup using full page refreshes, couldn't figure out a good way around it without writing tons of code until I stumbled on http://code.google.com/p/click-jquery/. I had everything working great in Chrome, went to test in IE and it blew up. Otherwise it seems to work fine, now that I have a workaround for this issue I'll continue developing/testing.

-----Original Message-----
From: Bob Schellink [mailto:sabob1@gmail.com] 
Sent: Thursday, June 14, 2012 12:36 PM
To: user@click.apache.org
Subject: Re: jQuery-Click IE9 Parsing request failed

I think the example you refer to is using an older version of Click, perhaps 2.2.0? I somehow recall that issue was fixed in Click 2.3.0 but I could be wrong.

Are you seeing the issue with 2.3.0?

regards

Bob

On 14/06/2012 17:56 PM, Kuhns, John wrote:
> Figured it out. The&amp in the column headers was causing msxml to choke. I wrapped the table HTML in CDATA tags and all seems to be working. Below is the essence of the steps I took:
>
> ...
>       someSelect.addBehavior(new JQBehavior(JQEvent.CHANGE) {
>           @Override
>           public ActionResult onAction(Control source, JQEvent event) {
>               return updateSomeSelect();
>           }
>       });
> ...
>      private ActionResult updateSomeSelect() {
>          JQTaconite actionResult = new JQTaconite();
>          table.onProcess();
>          StringBuilder sb = new StringBuilder();
>          sb.append("<![CDATA[");
>          sb.append(table.toString());
>          sb.append("]]>");
>          // get rid of the pagebanner and links, if there
>          actionResult.remove(".pagebanner");
>          actionResult.remove(".pagelinks");
>          // replace the table, the pagebanner and links will be included if configured
>          actionResult.replace(table, sb.toString());
>          return actionResult;
>      }
>
> Thanks,
> John
>
> -----Original Message-----
> From: Kuhns, John [mailto:jkuhns@AimNTLS.com]
> Sent: Thursday, June 14, 2012 11:30 AM
> To: user@click.apache.org
> Subject: RE: jQuery-Click IE9 Parsing request failed
>
> Actually, no, this is the example:
>
> http://click-jquery.appspot.com/ajax/table-demo.htm
>
> I need the jQuery-Click, I want to populate the table via Ajax on a select change, then be able to sort and page with Ajax, too. I've tried a few things with no luck so far, I'll keep trying.
>
> Thanks,
> John
>
> -----Original Message-----
> From: Kuhns, John [mailto:jkuhns@AimNTLS.com]
> Sent: Thursday, June 14, 2012 10:58 AM
> To: user@click.apache.org
> Subject: RE: jQuery-Click IE9 Parsing request failed
>
> Hmmm, it works for me too. As I paged through the table yesterday it was throwing up the same parseerror message and then paging. I'll research it more and see if I can find the real problem.
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 10:39 AM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> You mean this example?
> http://click.avoka.com/click-examples/ajax/table/table-ajax.htm
>
> Works for me in IE9 though?
>
> regards
>
> Bob
>
> On 14/06/2012 15:51 PM, Kuhns, John wrote:
>> Right, a click table, and I'm in standards mode:
>>
>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" 
>> "http://www.w3.org/TR/html4/strict.dtd">
>>
>> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>>
>> Thanks,
>> John
>>
>> -----Original Message-----
>> From: Bob Schellink [mailto:sabob1@gmail.com]
>> Sent: Thursday, June 14, 2012 8:37 AM
>> To: user@click.apache.org
>> Subject: Re: jQuery-Click IE9 Parsing request failed
>>
>> Hi John,
>>
>> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>>
>> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>>
>> regards
>>
>> Bob
>>
>> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>   wrote:
>>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>>
>>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>>
>>> Thanks,
>>> John
>


Re: jQuery-Click IE9 Parsing request failed

Posted by Bob Schellink <sa...@gmail.com>.
I think the example you refer to is using an older version of Click, perhaps 2.2.0? I somehow recall 
that issue was fixed in Click 2.3.0 but I could be wrong.

Are you seeing the issue with 2.3.0?

regards

Bob

On 14/06/2012 17:56 PM, Kuhns, John wrote:
> Figured it out. The&amp in the column headers was causing msxml to choke. I wrapped the table HTML in CDATA tags and all seems to be working. Below is the essence of the steps I took:
>
> ...
>       someSelect.addBehavior(new JQBehavior(JQEvent.CHANGE) {
>           @Override
>           public ActionResult onAction(Control source, JQEvent event) {
>               return updateSomeSelect();
>           }
>       });
> ...
>      private ActionResult updateSomeSelect() {
>          JQTaconite actionResult = new JQTaconite();
>          table.onProcess();
>          StringBuilder sb = new StringBuilder();
>          sb.append("<![CDATA[");
>          sb.append(table.toString());
>          sb.append("]]>");
>          // get rid of the pagebanner and links, if there
>          actionResult.remove(".pagebanner");
>          actionResult.remove(".pagelinks");
>          // replace the table, the pagebanner and links will be included if configured
>          actionResult.replace(table, sb.toString());
>          return actionResult;
>      }
>
> Thanks,
> John
>
> -----Original Message-----
> From: Kuhns, John [mailto:jkuhns@AimNTLS.com]
> Sent: Thursday, June 14, 2012 11:30 AM
> To: user@click.apache.org
> Subject: RE: jQuery-Click IE9 Parsing request failed
>
> Actually, no, this is the example:
>
> http://click-jquery.appspot.com/ajax/table-demo.htm
>
> I need the jQuery-Click, I want to populate the table via Ajax on a select change, then be able to sort and page with Ajax, too. I've tried a few things with no luck so far, I'll keep trying.
>
> Thanks,
> John
>
> -----Original Message-----
> From: Kuhns, John [mailto:jkuhns@AimNTLS.com]
> Sent: Thursday, June 14, 2012 10:58 AM
> To: user@click.apache.org
> Subject: RE: jQuery-Click IE9 Parsing request failed
>
> Hmmm, it works for me too. As I paged through the table yesterday it was throwing up the same parseerror message and then paging. I'll research it more and see if I can find the real problem.
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 10:39 AM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> You mean this example?
> http://click.avoka.com/click-examples/ajax/table/table-ajax.htm
>
> Works for me in IE9 though?
>
> regards
>
> Bob
>
> On 14/06/2012 15:51 PM, Kuhns, John wrote:
>> Right, a click table, and I'm in standards mode:
>>
>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd">
>>
>> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>>
>> Thanks,
>> John
>>
>> -----Original Message-----
>> From: Bob Schellink [mailto:sabob1@gmail.com]
>> Sent: Thursday, June 14, 2012 8:37 AM
>> To: user@click.apache.org
>> Subject: Re: jQuery-Click IE9 Parsing request failed
>>
>> Hi John,
>>
>> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>>
>> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>>
>> regards
>>
>> Bob
>>
>> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>   wrote:
>>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>>
>>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>>
>>> Thanks,
>>> John
>


RE: jQuery-Click IE9 Parsing request failed

Posted by "Kuhns, John" <jk...@AimNTLS.com>.
Figured it out. The &amp in the column headers was causing msxml to choke. I wrapped the table HTML in CDATA tags and all seems to be working. Below is the essence of the steps I took:
 
...
     someSelect.addBehavior(new JQBehavior(JQEvent.CHANGE) { 
         @Override 
         public ActionResult onAction(Control source, JQEvent event) { 
             return updateSomeSelect(); 
         } 
     });
...
    private ActionResult updateSomeSelect() { 
        JQTaconite actionResult = new JQTaconite(); 
        table.onProcess();
        StringBuilder sb = new StringBuilder();
        sb.append("<![CDATA[");
        sb.append(table.toString());
        sb.append("]]>");
        // get rid of the pagebanner and links, if there
        actionResult.remove(".pagebanner");
        actionResult.remove(".pagelinks");
        // replace the table, the pagebanner and links will be included if configured
        actionResult.replace(table, sb.toString());
        return actionResult; 
    }

Thanks,
John

-----Original Message-----
From: Kuhns, John [mailto:jkuhns@AimNTLS.com] 
Sent: Thursday, June 14, 2012 11:30 AM
To: user@click.apache.org
Subject: RE: jQuery-Click IE9 Parsing request failed

Actually, no, this is the example:

http://click-jquery.appspot.com/ajax/table-demo.htm

I need the jQuery-Click, I want to populate the table via Ajax on a select change, then be able to sort and page with Ajax, too. I've tried a few things with no luck so far, I'll keep trying.

Thanks,
John

-----Original Message-----
From: Kuhns, John [mailto:jkuhns@AimNTLS.com] 
Sent: Thursday, June 14, 2012 10:58 AM
To: user@click.apache.org
Subject: RE: jQuery-Click IE9 Parsing request failed

Hmmm, it works for me too. As I paged through the table yesterday it was throwing up the same parseerror message and then paging. I'll research it more and see if I can find the real problem.

-----Original Message-----
From: Bob Schellink [mailto:sabob1@gmail.com] 
Sent: Thursday, June 14, 2012 10:39 AM
To: user@click.apache.org
Subject: Re: jQuery-Click IE9 Parsing request failed

You mean this example?
http://click.avoka.com/click-examples/ajax/table/table-ajax.htm

Works for me in IE9 though?

regards

Bob

On 14/06/2012 15:51 PM, Kuhns, John wrote:
> Right, a click table, and I'm in standards mode:
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd">
>
> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>
> Thanks,
> John
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 8:37 AM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> Hi John,
>
> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>
> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>
> regards
>
> Bob
>
> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>  wrote:
>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>
>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>
>> Thanks,
>> John


RE: jQuery-Click IE9 Parsing request failed

Posted by "Kuhns, John" <jk...@AimNTLS.com>.
Actually, no, this is the example:

http://click-jquery.appspot.com/ajax/table-demo.htm

I need the jQuery-Click, I want to populate the table via Ajax on a select change, then be able to sort and page with Ajax, too. I've tried a few things with no luck so far, I'll keep trying.

Thanks,
John

-----Original Message-----
From: Kuhns, John [mailto:jkuhns@AimNTLS.com] 
Sent: Thursday, June 14, 2012 10:58 AM
To: user@click.apache.org
Subject: RE: jQuery-Click IE9 Parsing request failed

Hmmm, it works for me too. As I paged through the table yesterday it was throwing up the same parseerror message and then paging. I'll research it more and see if I can find the real problem.

-----Original Message-----
From: Bob Schellink [mailto:sabob1@gmail.com] 
Sent: Thursday, June 14, 2012 10:39 AM
To: user@click.apache.org
Subject: Re: jQuery-Click IE9 Parsing request failed

You mean this example?
http://click.avoka.com/click-examples/ajax/table/table-ajax.htm

Works for me in IE9 though?

regards

Bob

On 14/06/2012 15:51 PM, Kuhns, John wrote:
> Right, a click table, and I'm in standards mode:
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd">
>
> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>
> Thanks,
> John
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 8:37 AM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> Hi John,
>
> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>
> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>
> regards
>
> Bob
>
> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>  wrote:
>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>
>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>
>> Thanks,
>> John


RE: jQuery-Click IE9 Parsing request failed

Posted by "Kuhns, John" <jk...@AimNTLS.com>.
Hmmm, it works for me too. As I paged through the table yesterday it was throwing up the same parseerror message and then paging. I'll research it more and see if I can find the real problem.

-----Original Message-----
From: Bob Schellink [mailto:sabob1@gmail.com] 
Sent: Thursday, June 14, 2012 10:39 AM
To: user@click.apache.org
Subject: Re: jQuery-Click IE9 Parsing request failed

You mean this example?
http://click.avoka.com/click-examples/ajax/table/table-ajax.htm

Works for me in IE9 though?

regards

Bob

On 14/06/2012 15:51 PM, Kuhns, John wrote:
> Right, a click table, and I'm in standards mode:
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd">
>
> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>
> Thanks,
> John
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 8:37 AM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> Hi John,
>
> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>
> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>
> regards
>
> Bob
>
> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>  wrote:
>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>
>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>
>> Thanks,
>> John


Re: jQuery-Click IE9 Parsing request failed

Posted by Bob Schellink <sa...@gmail.com>.
You mean this example?
http://click.avoka.com/click-examples/ajax/table/table-ajax.htm

Works for me in IE9 though?

regards

Bob

On 14/06/2012 15:51 PM, Kuhns, John wrote:
> Right, a click table, and I'm in standards mode:
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd">
>
> Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.
>
> Thanks,
> John
>
> -----Original Message-----
> From: Bob Schellink [mailto:sabob1@gmail.com]
> Sent: Thursday, June 14, 2012 8:37 AM
> To: user@click.apache.org
> Subject: Re: jQuery-Click IE9 Parsing request failed
>
> Hi John,
>
> Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?
>
> I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.
>
> regards
>
> Bob
>
> On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John<jk...@aimntls.com>  wrote:
>> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>>
>> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>>
>> Thanks,
>> John


RE: jQuery-Click IE9 Parsing request failed

Posted by "Kuhns, John" <jk...@AimNTLS.com>.
Right, a click table, and I'm in standards mode:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd">

Quirks mode isn't an option. Interestingly enough, the same error occurs on the example page in IE9, but the action completes afterwards.

Thanks,
John

-----Original Message-----
From: Bob Schellink [mailto:sabob1@gmail.com] 
Sent: Thursday, June 14, 2012 8:37 AM
To: user@click.apache.org
Subject: Re: jQuery-Click IE9 Parsing request failed

Hi John,

Attachments are stripped from these lists. Is it a Click table you are returning and rendering or your own HTML table?

I recall tables has to have a tbody element. Also check if you are rendering in standards mode or quirks mode.

regards

Bob

On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John <jk...@aimntls.com> wrote:
> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>
> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>
> Thanks,
> John

Re: jQuery-Click IE9 Parsing request failed

Posted by Bob Schellink <sa...@gmail.com>.
Hi John,

Attachments are stripped from these lists. Is it a Click table you are
returning and rendering or your own HTML table?

I recall tables has to have a tbody element. Also check if you are
rendering in standards mode or quirks mode.

regards

Bob

On Thu, Jun 14, 2012 at 1:43 PM, Kuhns, John <jk...@aimntls.com> wrote:
> I'm attempting to use the jQuery-Click add in and am getting this error on rendering a table in IE9, everything works fine in other browsers.
>
> I've found a few references around the web, mostly dealing with Content-Type and special characters, but I'm banging my head against the wall and hope someone out there has a work around....
>
> Thanks,
> John