You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by Jochen Walz <jo...@googlemail.com.INVALID> on 2023/09/29 10:32:06 UTC

Broker network connection between ActiveMQ Classic and Artemis

Hello,

I have a solution where ActiveMQ Classic brokers (5.15.x) are running on remote devices. They have network connectors to connect to backend brokers (masterslave configuration) with duplex and simplex mode. The backend brokers have simple openwire connectors (TLS is terminated by a proxy).

I cannot exchange the remote brokers. The question: Is it possible to exchange the backend brokers by Artemis? I.e., would the broker network still work without any change on the remote ActiveMQ Classic brokers? If so, is there any example how to configure the Artemis brokers for that?

Or is there no way to create such network-of-brokers between ActiveMQ Classic and Artemis?

Thanks & Regards
Jochen

Re: Broker network connection between ActiveMQ Classic and Artemis

Posted by Jochen Walz <jo...@googlemail.com.INVALID>.
Unfortunately, I cannot change anything on the remote devices, so that side of the connection must stay as it is (ActiveMQ 5.x with network connectors).

Am 30. September 2023 15:23:10 MESZ schrieb Clebert Suconic <cl...@gmail.com>:
>You could use an amqp pull bridge in artemis.  Using broker connection to
>bring on messages.
>
>Or use camel.  Which is probably the easiest way.
>
>On Sat, Sep 30, 2023 at 3:59 AM Jochen Walz
><jo...@googlemail.com.invalid> wrote:
>
>> Hi Matt,
>>
>> Thanks! I assume that this is true even when on the "local side", there is
>> only an openwire connector, because the mechanism to build the network
>> connection including backchannels for duplex connectors must be supported
>> on both sides anyways.
>>
>> So, currently I am bound to the classic version on both sides.
>>
>> Regards
>> Jochen
>>
>>
>> Am 29. September 2023 17:08:56 MESZ schrieb Matt Pavlovich <
>> mattrpav@gmail.com>:
>> >Hi Jochen-
>> >
>> >Unfortunately, Artemis currently does not support ActiveMQ 5.x’s network
>> connector.
>> >
>> >Thanks,
>> >Matt Pavlovich
>> >
>> >> On Sep 29, 2023, at 5:32 AM, Jochen Walz
>> <jo...@googlemail.com.INVALID> wrote:
>> >>
>> >> Hello,
>> >>
>> >> I have a solution where ActiveMQ Classic brokers (5.15.x) are running
>> on remote devices. They have network connectors to connect to backend
>> brokers (masterslave configuration) with duplex and simplex mode. The
>> backend brokers have simple openwire connectors (TLS is terminated by a
>> proxy).
>> >>
>> >> I cannot exchange the remote brokers. The question: Is it possible to
>> exchange the backend brokers by Artemis? I.e., would the broker network
>> still work without any change on the remote ActiveMQ Classic brokers? If
>> so, is there any example how to configure the Artemis brokers for that?
>> >>
>> >> Or is there no way to create such network-of-brokers between ActiveMQ
>> Classic and Artemis?
>> >>
>> >> Thanks & Regards
>> >> Jochen
>> >
>>

Re: Broker network connection between ActiveMQ Classic and Artemis

Posted by Clebert Suconic <cl...@gmail.com>.
You could use an amqp pull bridge in artemis.  Using broker connection to
bring on messages.

Or use camel.  Which is probably the easiest way.

On Sat, Sep 30, 2023 at 3:59 AM Jochen Walz
<jo...@googlemail.com.invalid> wrote:

> Hi Matt,
>
> Thanks! I assume that this is true even when on the "local side", there is
> only an openwire connector, because the mechanism to build the network
> connection including backchannels for duplex connectors must be supported
> on both sides anyways.
>
> So, currently I am bound to the classic version on both sides.
>
> Regards
> Jochen
>
>
> Am 29. September 2023 17:08:56 MESZ schrieb Matt Pavlovich <
> mattrpav@gmail.com>:
> >Hi Jochen-
> >
> >Unfortunately, Artemis currently does not support ActiveMQ 5.x’s network
> connector.
> >
> >Thanks,
> >Matt Pavlovich
> >
> >> On Sep 29, 2023, at 5:32 AM, Jochen Walz
> <jo...@googlemail.com.INVALID> wrote:
> >>
> >> Hello,
> >>
> >> I have a solution where ActiveMQ Classic brokers (5.15.x) are running
> on remote devices. They have network connectors to connect to backend
> brokers (masterslave configuration) with duplex and simplex mode. The
> backend brokers have simple openwire connectors (TLS is terminated by a
> proxy).
> >>
> >> I cannot exchange the remote brokers. The question: Is it possible to
> exchange the backend brokers by Artemis? I.e., would the broker network
> still work without any change on the remote ActiveMQ Classic brokers? If
> so, is there any example how to configure the Artemis brokers for that?
> >>
> >> Or is there no way to create such network-of-brokers between ActiveMQ
> Classic and Artemis?
> >>
> >> Thanks & Regards
> >> Jochen
> >
>

Re: Broker network connection between ActiveMQ Classic and Artemis

Posted by Jochen Walz <jo...@googlemail.com.INVALID>.
Hi Matt,

Thanks! I assume that this is true even when on the "local side", there is only an openwire connector, because the mechanism to build the network connection including backchannels for duplex connectors must be supported on both sides anyways.

So, currently I am bound to the classic version on both sides.

Regards
Jochen


Am 29. September 2023 17:08:56 MESZ schrieb Matt Pavlovich <ma...@gmail.com>:
>Hi Jochen-
>
>Unfortunately, Artemis currently does not support ActiveMQ 5.x’s network connector.
>
>Thanks,
>Matt Pavlovich
>
>> On Sep 29, 2023, at 5:32 AM, Jochen Walz <jo...@googlemail.com.INVALID> wrote:
>> 
>> Hello,
>> 
>> I have a solution where ActiveMQ Classic brokers (5.15.x) are running on remote devices. They have network connectors to connect to backend brokers (masterslave configuration) with duplex and simplex mode. The backend brokers have simple openwire connectors (TLS is terminated by a proxy).
>> 
>> I cannot exchange the remote brokers. The question: Is it possible to exchange the backend brokers by Artemis? I.e., would the broker network still work without any change on the remote ActiveMQ Classic brokers? If so, is there any example how to configure the Artemis brokers for that?
>> 
>> Or is there no way to create such network-of-brokers between ActiveMQ Classic and Artemis?
>> 
>> Thanks & Regards
>> Jochen
>

Re: Broker network connection between ActiveMQ Classic and Artemis

Posted by Matt Pavlovich <ma...@gmail.com>.
Hi Jochen-

Unfortunately, Artemis currently does not support ActiveMQ 5.x’s network connector.

Thanks,
Matt Pavlovich

> On Sep 29, 2023, at 5:32 AM, Jochen Walz <jo...@googlemail.com.INVALID> wrote:
> 
> Hello,
> 
> I have a solution where ActiveMQ Classic brokers (5.15.x) are running on remote devices. They have network connectors to connect to backend brokers (masterslave configuration) with duplex and simplex mode. The backend brokers have simple openwire connectors (TLS is terminated by a proxy).
> 
> I cannot exchange the remote brokers. The question: Is it possible to exchange the backend brokers by Artemis? I.e., would the broker network still work without any change on the remote ActiveMQ Classic brokers? If so, is there any example how to configure the Artemis brokers for that?
> 
> Or is there no way to create such network-of-brokers between ActiveMQ Classic and Artemis?
> 
> Thanks & Regards
> Jochen