You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@servicemix.apache.org by Matthias von Arx <ma...@siemens.com> on 2006/10/03 10:18:09 UTC

BPEL Service Engine

Hi,

We would like use ServiceMix 3.0 (M2) for an enterprise application. We have
a lot of JSR181 services, some transformations and rules. For security we
wrote our own AuthorizationMap and LoginModule. All these units works fine
and with a http endpoint binding we can test them successfully.

But now we need to orchestrate all services. For this we wrote two BPEL
processes (a "master" and a "sub" process) according to the 1.1
specification. After installation of the
ServiceMix-BPE-ServiceEngine-Installer and the deployment of our bpel
service unit (built according to the descriptions @
http://incubator.apache.org/servicemix/main/servicemix-bpe.html) together
wit a matching http service unit the bpel service unit would not be started.
In the Log file I found a lot of NullPointerExceptions thrown in
WSDLFlattener. After that we removed our security modul from the deployment
and removed the sub-process and all the other stuff. At this time we wrote a
simple BPEL 1.1 process with an according wsdl passing a string as request
parameter whith should be returned as result message. But with this simple
bpel service unit the same picture: a lot of NullPointerExceptions in
WSDLFlattener. Then I compared our process with the loanbroker example and I
cannot find any differences in namespaces nor in wsdl nor in bpel
description. Even if I use the loanbroker example after some small changes
this example would not work.

My questions now:
(1) Is there a detailled description how to build and deploy a bpel 1.1
process?
(2) Are there descriptions about the pitfalls using the bpe service engine?

After that we looked for another bpel service engine. I found your link to
third party BPEL component 
http://incubator.apache.org/servicemix/main/bpel.html. On this page you
refer to http://pxe.intalio.org/confluence/display/PXE/Home and the
following sentence can be found on this page: "PXE has a JBI component and
deployment unit which, thanks to JBI, can just auto-deploy in any JBI
compliant container.". But on the intalio pages the "JBI Deployment" page
refers to ode (not pxe!) and the following source repository:
http://svn.apache.org/repos/asf/incubator/ode/trunk/. In some discussion
forums I found the information that ode will replace pxe...

Now my next Questions:
(3) Where can I get the PXE JBI deployment?
(4) Is there a detailled description about the howto use/deploy the pxe jbi
deployment?
(5) When would apache ode be part of ServiceMix?
(6) How or where can I get the source, working binaries and a description
from a current snapshot of ode because we had no access to the subversion
repository?

Best Regards,
Matthias von Arx
-- 
View this message in context: http://www.nabble.com/BPEL-Service-Engine-tf2374668.html#a6615939
Sent from the ServiceMix - User mailing list archive at Nabble.com.


Re: BPEL Service Engine

Posted by Guillaume Nodet <gn...@gmail.com>.
Well, I have no idea when Ode plan to release a milestone, so
I really can not say anything.

On 10/5/06, Matthias von Arx <ma...@siemens.com> wrote:
>
> When approximately is a release of ServiceMix including a release of the ODE
> SE available? In two months? In three months? We need an indication to be
> able to plan projects based on ServiceMix and ODE because BPEL 2.0 is a
> fundamental requirement.
>
> Best regards
> Matthias
>
>
> gnodet wrote:
> >
> > Ode should be included in ServiceMix as soon as a milestone is available.
> > You should find a pre-built installer of Ode Service Engine at [1]
> > Ode source is freely available at [2].
> >
> > The problem with the bpe SE is that there is not much support on it,
> > so I would advise you to try Ode instead.
> >
> > And you' re right, PXE has been donated to the Ode project at Apache,
> > so now, all development happen in the Ode project.
> >
> > [1]
> > http://people.apache.org/maven-snapshot-repository/org/apache/ode/ode-jbi-install/2.0-SNAPSHOT/
> > [2] http://svn.apache.org/repos/asf/incubator/ode/trunk/
> >
> > On 10/3/06, Matthias von Arx <ma...@siemens.com> wrote:
> >>
> >> Hi,
> >>
> >> We would like use ServiceMix 3.0 (M2) for an enterprise application. We
> >> have
> >> a lot of JSR181 services, some transformations and rules. For security we
> >> wrote our own AuthorizationMap and LoginModule. All these units works
> >> fine
> >> and with a http endpoint binding we can test them successfully.
> >>
> >> But now we need to orchestrate all services. For this we wrote two BPEL
> >> processes (a "master" and a "sub" process) according to the 1.1
> >> specification. After installation of the
> >> ServiceMix-BPE-ServiceEngine-Installer and the deployment of our bpel
> >> service unit (built according to the descriptions @
> >> http://incubator.apache.org/servicemix/main/servicemix-bpe.html) together
> >> wit a matching http service unit the bpel service unit would not be
> >> started.
> >> In the Log file I found a lot of NullPointerExceptions thrown in
> >> WSDLFlattener. After that we removed our security modul from the
> >> deployment
> >> and removed the sub-process and all the other stuff. At this time we
> >> wrote a
> >> simple BPEL 1.1 process with an according wsdl passing a string as
> >> request
> >> parameter whith should be returned as result message. But with this
> >> simple
> >> bpel service unit the same picture: a lot of NullPointerExceptions in
> >> WSDLFlattener. Then I compared our process with the loanbroker example
> >> and I
> >> cannot find any differences in namespaces nor in wsdl nor in bpel
> >> description. Even if I use the loanbroker example after some small
> >> changes
> >> this example would not work.
> >>
> >> My questions now:
> >> (1) Is there a detailled description how to build and deploy a bpel 1.1
> >> process?
> >> (2) Are there descriptions about the pitfalls using the bpe service
> >> engine?
> >>
> >> After that we looked for another bpel service engine. I found your link
> >> to
> >> third party BPEL component
> >> http://incubator.apache.org/servicemix/main/bpel.html. On this page you
> >> refer to http://pxe.intalio.org/confluence/display/PXE/Home and the
> >> following sentence can be found on this page: "PXE has a JBI component
> >> and
> >> deployment unit which, thanks to JBI, can just auto-deploy in any JBI
> >> compliant container.". But on the intalio pages the "JBI Deployment" page
> >> refers to ode (not pxe!) and the following source repository:
> >> http://svn.apache.org/repos/asf/incubator/ode/trunk/. In some discussion
> >> forums I found the information that ode will replace pxe...
> >>
> >> Now my next Questions:
> >> (3) Where can I get the PXE JBI deployment?
> >> (4) Is there a detailled description about the howto use/deploy the pxe
> >> jbi
> >> deployment?
> >> (5) When would apache ode be part of ServiceMix?
> >> (6) How or where can I get the source, working binaries and a description
> >> from a current snapshot of ode because we had no access to the subversion
> >> repository?
> >>
> >> Best Regards,
> >> Matthias von Arx
> >> --
> >> View this message in context:
> >> http://www.nabble.com/BPEL-Service-Engine-tf2374668.html#a6615939
> >> Sent from the ServiceMix - User mailing list archive at Nabble.com.
> >>
> >>
> >
> >
> > --
> > Cheers,
> > Guillaume Nodet
> >
> >
>
> --
> View this message in context: http://www.nabble.com/BPEL-Service-Engine-tf2374668.html#a6661673
> Sent from the ServiceMix - User mailing list archive at Nabble.com.
>
>


-- 
Cheers,
Guillaume Nodet

Re: BPEL Service Engine

Posted by Matthias von Arx <ma...@siemens.com>.
When approximately is a release of ServiceMix including a release of the ODE
SE available? In two months? In three months? We need an indication to be
able to plan projects based on ServiceMix and ODE because BPEL 2.0 is a
fundamental requirement.

Best regards
Matthias


gnodet wrote:
> 
> Ode should be included in ServiceMix as soon as a milestone is available.
> You should find a pre-built installer of Ode Service Engine at [1]
> Ode source is freely available at [2].
> 
> The problem with the bpe SE is that there is not much support on it,
> so I would advise you to try Ode instead.
> 
> And you' re right, PXE has been donated to the Ode project at Apache,
> so now, all development happen in the Ode project.
> 
> [1]
> http://people.apache.org/maven-snapshot-repository/org/apache/ode/ode-jbi-install/2.0-SNAPSHOT/
> [2] http://svn.apache.org/repos/asf/incubator/ode/trunk/
> 
> On 10/3/06, Matthias von Arx <ma...@siemens.com> wrote:
>>
>> Hi,
>>
>> We would like use ServiceMix 3.0 (M2) for an enterprise application. We
>> have
>> a lot of JSR181 services, some transformations and rules. For security we
>> wrote our own AuthorizationMap and LoginModule. All these units works
>> fine
>> and with a http endpoint binding we can test them successfully.
>>
>> But now we need to orchestrate all services. For this we wrote two BPEL
>> processes (a "master" and a "sub" process) according to the 1.1
>> specification. After installation of the
>> ServiceMix-BPE-ServiceEngine-Installer and the deployment of our bpel
>> service unit (built according to the descriptions @
>> http://incubator.apache.org/servicemix/main/servicemix-bpe.html) together
>> wit a matching http service unit the bpel service unit would not be
>> started.
>> In the Log file I found a lot of NullPointerExceptions thrown in
>> WSDLFlattener. After that we removed our security modul from the
>> deployment
>> and removed the sub-process and all the other stuff. At this time we
>> wrote a
>> simple BPEL 1.1 process with an according wsdl passing a string as
>> request
>> parameter whith should be returned as result message. But with this
>> simple
>> bpel service unit the same picture: a lot of NullPointerExceptions in
>> WSDLFlattener. Then I compared our process with the loanbroker example
>> and I
>> cannot find any differences in namespaces nor in wsdl nor in bpel
>> description. Even if I use the loanbroker example after some small
>> changes
>> this example would not work.
>>
>> My questions now:
>> (1) Is there a detailled description how to build and deploy a bpel 1.1
>> process?
>> (2) Are there descriptions about the pitfalls using the bpe service
>> engine?
>>
>> After that we looked for another bpel service engine. I found your link
>> to
>> third party BPEL component
>> http://incubator.apache.org/servicemix/main/bpel.html. On this page you
>> refer to http://pxe.intalio.org/confluence/display/PXE/Home and the
>> following sentence can be found on this page: "PXE has a JBI component
>> and
>> deployment unit which, thanks to JBI, can just auto-deploy in any JBI
>> compliant container.". But on the intalio pages the "JBI Deployment" page
>> refers to ode (not pxe!) and the following source repository:
>> http://svn.apache.org/repos/asf/incubator/ode/trunk/. In some discussion
>> forums I found the information that ode will replace pxe...
>>
>> Now my next Questions:
>> (3) Where can I get the PXE JBI deployment?
>> (4) Is there a detailled description about the howto use/deploy the pxe
>> jbi
>> deployment?
>> (5) When would apache ode be part of ServiceMix?
>> (6) How or where can I get the source, working binaries and a description
>> from a current snapshot of ode because we had no access to the subversion
>> repository?
>>
>> Best Regards,
>> Matthias von Arx
>> --
>> View this message in context:
>> http://www.nabble.com/BPEL-Service-Engine-tf2374668.html#a6615939
>> Sent from the ServiceMix - User mailing list archive at Nabble.com.
>>
>>
> 
> 
> -- 
> Cheers,
> Guillaume Nodet
> 
> 

-- 
View this message in context: http://www.nabble.com/BPEL-Service-Engine-tf2374668.html#a6661673
Sent from the ServiceMix - User mailing list archive at Nabble.com.


Re: BPEL Service Engine

Posted by Guillaume Nodet <gn...@gmail.com>.
Ode should be included in ServiceMix as soon as a milestone is available.
You should find a pre-built installer of Ode Service Engine at [1]
Ode source is freely available at [2].

The problem with the bpe SE is that there is not much support on it,
so I would advise you to try Ode instead.

And you' re right, PXE has been donated to the Ode project at Apache,
so now, all development happen in the Ode project.

[1] http://people.apache.org/maven-snapshot-repository/org/apache/ode/ode-jbi-install/2.0-SNAPSHOT/
[2] http://svn.apache.org/repos/asf/incubator/ode/trunk/

On 10/3/06, Matthias von Arx <ma...@siemens.com> wrote:
>
> Hi,
>
> We would like use ServiceMix 3.0 (M2) for an enterprise application. We have
> a lot of JSR181 services, some transformations and rules. For security we
> wrote our own AuthorizationMap and LoginModule. All these units works fine
> and with a http endpoint binding we can test them successfully.
>
> But now we need to orchestrate all services. For this we wrote two BPEL
> processes (a "master" and a "sub" process) according to the 1.1
> specification. After installation of the
> ServiceMix-BPE-ServiceEngine-Installer and the deployment of our bpel
> service unit (built according to the descriptions @
> http://incubator.apache.org/servicemix/main/servicemix-bpe.html) together
> wit a matching http service unit the bpel service unit would not be started.
> In the Log file I found a lot of NullPointerExceptions thrown in
> WSDLFlattener. After that we removed our security modul from the deployment
> and removed the sub-process and all the other stuff. At this time we wrote a
> simple BPEL 1.1 process with an according wsdl passing a string as request
> parameter whith should be returned as result message. But with this simple
> bpel service unit the same picture: a lot of NullPointerExceptions in
> WSDLFlattener. Then I compared our process with the loanbroker example and I
> cannot find any differences in namespaces nor in wsdl nor in bpel
> description. Even if I use the loanbroker example after some small changes
> this example would not work.
>
> My questions now:
> (1) Is there a detailled description how to build and deploy a bpel 1.1
> process?
> (2) Are there descriptions about the pitfalls using the bpe service engine?
>
> After that we looked for another bpel service engine. I found your link to
> third party BPEL component
> http://incubator.apache.org/servicemix/main/bpel.html. On this page you
> refer to http://pxe.intalio.org/confluence/display/PXE/Home and the
> following sentence can be found on this page: "PXE has a JBI component and
> deployment unit which, thanks to JBI, can just auto-deploy in any JBI
> compliant container.". But on the intalio pages the "JBI Deployment" page
> refers to ode (not pxe!) and the following source repository:
> http://svn.apache.org/repos/asf/incubator/ode/trunk/. In some discussion
> forums I found the information that ode will replace pxe...
>
> Now my next Questions:
> (3) Where can I get the PXE JBI deployment?
> (4) Is there a detailled description about the howto use/deploy the pxe jbi
> deployment?
> (5) When would apache ode be part of ServiceMix?
> (6) How or where can I get the source, working binaries and a description
> from a current snapshot of ode because we had no access to the subversion
> repository?
>
> Best Regards,
> Matthias von Arx
> --
> View this message in context: http://www.nabble.com/BPEL-Service-Engine-tf2374668.html#a6615939
> Sent from the ServiceMix - User mailing list archive at Nabble.com.
>
>


-- 
Cheers,
Guillaume Nodet