You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@httpd.apache.org by Kai Fürstenberg <ka...@fuerstenberg.ws> on 2020/08/12 10:28:19 UTC
[users@httpd] HTTPD server dies when loading phplib7.so
Hi everybody,
I discuss this issue on the PHP-install mailing list as well, but it is
not clear whether this fault is caused from PHP or httpd.
I run a server with Debian Buster. I used to compile some of the needed
programs, so that I am able to use more recent versions than provided by
my distribution. Two of these are PHP and Apache httpd.
Now I have updated my httpd to version 2.4.46 and wanted to update PHP
from 7.2.9 to 7.4.9.
Unfortunately httpd dies with segmentation fault, so I reinstalled 7.2.9
again, which works good. I was able to update php to 7.2.33, wich also
works fine.
So I startet to install both httpd and PHP in special directories for
testing. The Apache testing version is 2.4.43. PHP testing version is
7.4.9. This issue also occures when using the latest PHP 7.3.x version.
I have configured Apache and PHP as following:
Apache:
./configure --prefix=/usr/local/httpd-test
--with-apr=/usr/local/apr-httpd/
--with-apr-util=/usr/local/apr-util-httpd/ --enable-modules=all
--enable-proxy --enable-proxy-connect --enable-proxy-http
--enable-rewrite --enable-mods-shared=all --enable-ssl
PHP:
./configure --prefix=/usr/local/php-test --disable-all --disable-cgi
--with-apxs2=/usr/local/httpd-test/bin/apxs
configure, make and make install run without errors. Just "make test"
during PHP installation shows some failed tests.
Then, when I try to start httpd, it dies with segmentation fault.
Before you ask: I do not receive any log messages, neither in error_log
nor in syslog. I just receive a return code 139.
So I started debugging this issue (also with the help of the php-install
mailing list).
Starting httpd in debug mode gives me some output:
httpd -X -e debug -k start
This shows the loaded modules. You can find the output here:
https://pastebin.com/CDbfkYgi
mod_alias.so is the last module being loaded before loading libphp7.so
As I still do not get any logs or anything obvious, I created a core dump.
gdb "bt" and "bt full" outputs can be found here:
(gdb) bt: https://pastebin.com/G2mQs7m8
(gdb) bt full: https://pastebin.com/ArK5sUTF
From a suggestion on the php-install list I tried to use valgrind.
I don't know if this is expected behaviour, but using valgrind the
server starts normally, lilphp7.so gets loaded. When I start it without,
it dies again.
The valgind output of
valgrind --leak-check=full --show-leak-kinds=all -v
/usr/local/httpd-test/bin/httpd -k start
can be found here:
https://pastebin.com/Dwgjxjgj
httpd starts well without libphp7.so (version 7.4.9), and it starts well
with version 7.2.33.
Can anybody tell me where this fault comes from or how to get rid of it?
I would like to upgrade PHP to 7.4, because I expect that PHP 7.2 will
be discontinued soon.
Greetings
Kai Fürstenberg
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: [users@httpd] HTTPD server dies when loading phplib7.so
Posted by Kai Fürstenberg <ka...@fuerstenberg.ws>.
Hi Frank,
Am 12.08.2020 um 15:51 schrieb Frank:
> I would strongly recommend to use php-fpm instead of the mod_php DSO, in
> this case.
I wan't aware of php-fpm so far. Looks very intersting and I'll give it
a try.
Thank you.
Kai
> On 12/08/20 06:28 AM, Kai Fürstenberg wrote:
>> Hi everybody,
>>
>> I discuss this issue on the PHP-install mailing list as well, but it is
>> not clear whether this fault is caused from PHP or httpd.
>>
>> I run a server with Debian Buster. I used to compile some of the needed
>> programs, so that I am able to use more recent versions than provided by
>> my distribution. Two of these are PHP and Apache httpd.
>>
>> Now I have updated my httpd to version 2.4.46 and wanted to update PHP
>> from 7.2.9 to 7.4.9.
>>
>> Unfortunately httpd dies with segmentation fault, so I reinstalled 7.2.9
>> again, which works good. I was able to update php to 7.2.33, wich also
>> works fine.
>>
>> So I startet to install both httpd and PHP in special directories for
>> testing. The Apache testing version is 2.4.43. PHP testing version is
>> 7.4.9. This issue also occures when using the latest PHP 7.3.x version.
>>
>> I have configured Apache and PHP as following:
>>
>> Apache:
>> ./configure --prefix=/usr/local/httpd-test
>> --with-apr=/usr/local/apr-httpd/
>> --with-apr-util=/usr/local/apr-util-httpd/ --enable-modules=all
>> --enable-proxy --enable-proxy-connect --enable-proxy-http
>> --enable-rewrite --enable-mods-shared=all --enable-ssl
>>
>> PHP:
>> ./configure --prefix=/usr/local/php-test --disable-all --disable-cgi
>> --with-apxs2=/usr/local/httpd-test/bin/apxs
>>
>> configure, make and make install run without errors. Just "make test"
>> during PHP installation shows some failed tests.
>>
>> Then, when I try to start httpd, it dies with segmentation fault.
>>
>> Before you ask: I do not receive any log messages, neither in error_log
>> nor in syslog. I just receive a return code 139.
>>
>> So I started debugging this issue (also with the help of the php-install
>> mailing list).
>>
>> Starting httpd in debug mode gives me some output:
>> httpd -X -e debug -k start
>> This shows the loaded modules. You can find the output here:
>> https://pastebin.com/CDbfkYgi
>> mod_alias.so is the last module being loaded before loading libphp7.so
>>
>> As I still do not get any logs or anything obvious, I created a core dump.
>> gdb "bt" and "bt full" outputs can be found here:
>> (gdb) bt: https://pastebin.com/G2mQs7m8
>> (gdb) bt full: https://pastebin.com/ArK5sUTF
>>
>> From a suggestion on the php-install list I tried to use valgrind.
>> I don't know if this is expected behaviour, but using valgrind the
>> server starts normally, lilphp7.so gets loaded. When I start it without,
>> it dies again.
>> The valgind output of
>> valgrind --leak-check=full --show-leak-kinds=all -v
>> /usr/local/httpd-test/bin/httpd -k start
>> can be found here:
>> https://pastebin.com/Dwgjxjgj
>>
>> httpd starts well without libphp7.so (version 7.4.9), and it starts well
>> with version 7.2.33.
>>
>> Can anybody tell me where this fault comes from or how to get rid of it?
>> I would like to upgrade PHP to 7.4, because I expect that PHP 7.2 will
>> be discontinued soon.
>>
>> Greetings
>> Kai Fürstenberg
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: [users@httpd] HTTPD server dies when loading phplib7.so
Posted by Frank <th...@apache.org>.
I would strongly recommend to use php-fpm instead of the mod_php DSO, in
this case.
On 12/08/20 06:28 AM, Kai Fürstenberg wrote:
> Hi everybody,
>
> I discuss this issue on the PHP-install mailing list as well, but it is
> not clear whether this fault is caused from PHP or httpd.
>
> I run a server with Debian Buster. I used to compile some of the needed
> programs, so that I am able to use more recent versions than provided by
> my distribution. Two of these are PHP and Apache httpd.
>
> Now I have updated my httpd to version 2.4.46 and wanted to update PHP
> from 7.2.9 to 7.4.9.
>
> Unfortunately httpd dies with segmentation fault, so I reinstalled 7.2.9
> again, which works good. I was able to update php to 7.2.33, wich also
> works fine.
>
> So I startet to install both httpd and PHP in special directories for
> testing. The Apache testing version is 2.4.43. PHP testing version is
> 7.4.9. This issue also occures when using the latest PHP 7.3.x version.
>
> I have configured Apache and PHP as following:
>
> Apache:
> ./configure --prefix=/usr/local/httpd-test
> --with-apr=/usr/local/apr-httpd/
> --with-apr-util=/usr/local/apr-util-httpd/ --enable-modules=all
> --enable-proxy --enable-proxy-connect --enable-proxy-http
> --enable-rewrite --enable-mods-shared=all --enable-ssl
>
> PHP:
> ./configure --prefix=/usr/local/php-test --disable-all --disable-cgi
> --with-apxs2=/usr/local/httpd-test/bin/apxs
>
> configure, make and make install run without errors. Just "make test"
> during PHP installation shows some failed tests.
>
> Then, when I try to start httpd, it dies with segmentation fault.
>
> Before you ask: I do not receive any log messages, neither in error_log
> nor in syslog. I just receive a return code 139.
>
> So I started debugging this issue (also with the help of the php-install
> mailing list).
>
> Starting httpd in debug mode gives me some output:
> httpd -X -e debug -k start
> This shows the loaded modules. You can find the output here:
> https://pastebin.com/CDbfkYgi
> mod_alias.so is the last module being loaded before loading libphp7.so
>
> As I still do not get any logs or anything obvious, I created a core dump.
> gdb "bt" and "bt full" outputs can be found here:
> (gdb) bt: https://pastebin.com/G2mQs7m8
> (gdb) bt full: https://pastebin.com/ArK5sUTF
>
> From a suggestion on the php-install list I tried to use valgrind.
> I don't know if this is expected behaviour, but using valgrind the
> server starts normally, lilphp7.so gets loaded. When I start it without,
> it dies again.
> The valgind output of
> valgrind --leak-check=full --show-leak-kinds=all -v
> /usr/local/httpd-test/bin/httpd -k start
> can be found here:
> https://pastebin.com/Dwgjxjgj
>
> httpd starts well without libphp7.so (version 7.4.9), and it starts well
> with version 7.2.33.
>
> Can anybody tell me where this fault comes from or how to get rid of it?
> I would like to upgrade PHP to 7.4, because I expect that PHP 7.2 will
> be discontinued soon.
>
> Greetings
> Kai Fürstenberg
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org