You are viewing a plain text version of this content. The canonical link for it is here.
Posted to reviews@iotdb.apache.org by "changxue2022 (via GitHub)" <gi...@apache.org> on 2023/08/08 09:23:13 UTC
[GitHub] [iotdb-docs] changxue2022 opened a new pull request, #47: rewrite the cluster quickStart part, fix a bad link of cluster
changxue2022 opened a new pull request, #47:
URL: https://github.com/apache/iotdb-docs/pull/47
(no comment)
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: reviews-unsubscribe@iotdb.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [iotdb-docs] StefanieZhao7 commented on a diff in pull request #47: rewrite the cluster quickStart part, fix a bad link of cluster
Posted by "StefanieZhao7 (via GitHub)" <gi...@apache.org>.
StefanieZhao7 commented on code in PR #47:
URL: https://github.com/apache/iotdb-docs/pull/47#discussion_r1287030005
##########
src/zh/UserGuide/Master/QuickStart/ClusterQuickStart.md:
##########
@@ -20,162 +20,236 @@
-->
# 集群版
-
-以本地环境为例，演示 IoTDB 集群的启动、扩容与缩容。
-
-**注意：本文档为使用本地不同端口，进行伪分布式环境部署的教程，仅用于练习。在真实环境部署时，一般不需要修改节点端口，仅需配置节点 IPV4 地址或域名即可。**
-
-## 1. 准备启动环境
-
-解压 apache-iotdb-1.0.0-all-bin.zip 至 cluster0 目录。
-
-## 2. 启动最小集群
-
-在 Linux 环境中，部署 1 个 ConfigNode 和 1 个 DataNode（1C1D）集群版，默认 1 副本：
-```
-./cluster0/sbin/start-confignode.sh
-./cluster0/sbin/start-datanode.sh
-```
-
-## 3. 验证最小集群
-
-+ 最小集群启动成功，启动 Cli 进行验证：
-```
-./cluster0/sbin/start-cli.sh
-```
-
-+ 在 Cli 执行 [show cluster details](https://iotdb.apache.org/zh/UserGuide/Master/Maintenance-Tools/Maintenance-Command.html#%E6%9F%A5%E7%9C%8B%E5%85%A8%E9%83%A8%E8%8A%82%E7%82%B9%E4%BF%A1%E6%81%AF)
- 指令，结果如下所示：
-```
-IoTDB> show cluster details
-+------+----------+-------+---------------+------------+-------------------+----------+-------+--------+-------------------+-----------------+
-|NodeID| NodeType| Status|InternalAddress|InternalPort|ConfigConsensusPort|RpcAddress|RpcPort|MppPort |SchemaConsensusPort|DataConsensusPort|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+--------+-------------------+-----------------+
-| 0|ConfigNode|Running| 127.0.0.1| 10710| 10720| | | | | |
-| 1| DataNode|Running| 127.0.0.1| 10730| | 127.0.0.1| 6667| 10740| 10750| 10760|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+--------+-------------------+-----------------+
-Total line number = 2
-It costs 0.242s
-```
-
-## 4. 准备扩容环境
-
-解压 apache-iotdb-1.0.0-all-bin.zip 至 cluster1 目录和 cluster2 目录
-
-## 5. 修改节点配置文件
-
-对于 cluster1 目录：
-
-+ 修改 ConfigNode 配置：
-
-| **配置项** | **值** |
-|--------------------------------|-----------------|
-| cn\_internal\_address | 127.0.0.1 |
-| cn\_internal\_port | 10711 |
-| cn\_consensus\_port | 10721 |
-| cn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-+ 修改 DataNode 配置：
-
-| **配置项** | **值** |
-|----------------------------------------|-----------------|
-| dn\_rpc\_address | 127.0.0.1 |
-| dn\_rpc\_port | 6668 |
-| dn\_internal\_address | 127.0.0.1 |
-| dn\_internal\_port | 10731 |
-| dn\_mpp\_data\_exchange\_port | 10741 |
-| dn\_schema\_region\_consensus\_port | 10751 |
-| dn\_data\_region\_consensus\_port | 10761 |
-| dn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-对于 cluster2 目录：
-
-+ 修改 ConfigNode 配置：
-
-| **配置项** | **值** |
-|--------------------------------|-----------------|
-| cn\_internal\_address | 127.0.0.1 |
-| cn\_internal\_port | 10712 |
-| cn\_consensus\_port | 10722 |
-| cn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-+ 修改 DataNode 配置：
-
-| **配置项** | **值** |
-|--------------------------------------|-----------------|
-| dn\_rpc\_address | 127.0.0.1 |
-| dn\_rpc\_port | 6669 |
-| dn\_internal\_address | 127.0.0.1 |
-| dn\_internal\_port | 10732 |
-| dn\_mpp\_data\_exchange\_port | 10742 |
-| dn\_schema\_region\_consensus\_port | 10752 |
-| dn\_data\_region\_consensus\_port | 10762 |
-| dn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-## 6. 集群扩容
-
-将集群扩容至 3 个 ConfigNode 和 3 个 DataNode（3C3D）集群版，
-指令执行顺序为先启动 ConfigNode，再启动 DataNode：
-```
-./cluster1/sbin/start-confignode.sh
-./cluster2/sbin/start-confignode.sh
-./cluster1/sbin/start-datanode.sh
-./cluster2/sbin/start-datanode.sh
-```
-
-## 7. 验证扩容结果
-
-在 Cli 执行 `show cluster details`，结果如下：
-```
-IoTDB> show cluster details
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-|NodeID| NodeType| Status|InternalAddress|InternalPort|ConfigConsensusPort|RpcAddress|RpcPort|MppPort|SchemaConsensusPort|DataConsensusPort|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-| 0|ConfigNode|Running| 127.0.0.1| 10710| 10720| | | | | |
-| 2|ConfigNode|Running| 127.0.0.1| 10711| 10721| | | | | |
-| 3|ConfigNode|Running| 127.0.0.1| 10712| 10722| | | | | |
-| 1| DataNode|Running| 127.0.0.1| 10730| | 127.0.0.1| 6667| 10740| 10750| 10760|
-| 4| DataNode|Running| 127.0.0.1| 10731| | 127.0.0.1| 6668| 10741| 10751| 10761|
-| 5| DataNode|Running| 127.0.0.1| 10732| | 127.0.0.1| 6669| 10742| 10752| 10762|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-Total line number = 6
-It costs 0.012s
-```
-
-## 8. 集群缩容
-
-+ 缩容一个 ConfigNode：
-```
-# 使用 ip:port 移除
-./cluster0/sbin/remove-confignode.sh 127.0.0.1:10711
-
-# 使用节点编号移除
-./cluster0/sbin/remove-confignode.sh 2
-```
-
-+ 缩容一个 DataNode：
-```
-# 使用 ip:port 移除
-./cluster0/sbin/remove-datanode.sh 127.0.0.1:6668
-
-# 使用节点编号移除
-./cluster0/sbin/remove-confignode.sh 4
-```
-
-## 9. 验证缩容结果
-
-在 Cli 执行 `show cluster details`，结果如下：
-```
-IoTDB> show cluster details
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-|NodeID| NodeType| Status|InternalAddress|InternalPort|ConfigConsensusPort|RpcAddress|RpcPort|MppPort|SchemaConsensusPort|DataConsensusPort|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-| 0|ConfigNode|Running| 127.0.0.1| 10710| 10720| | | | | |
-| 3|ConfigNode|Running| 127.0.0.1| 10712| 10722| | | | | |
-| 1| DataNode|Running| 127.0.0.1| 10730| | 127.0.0.1| 6667| 10740| 10750| 10760|
-| 5| DataNode|Running| 127.0.0.1| 10732| | 127.0.0.1| 6669| 10742| 10752| 10762|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-Total line number = 4
-It costs 0.005s
+本文将简单介绍 IoTDB 集群的安装配置、扩容和缩容等常规操作。
+更多信息见:
+[集群基本概念](../Cluster/Cluster-Concept.md)
Review Comment:
这几个文档目前不对外开放了
##########
src/zh/UserGuide/Master/QuickStart/ClusterQuickStart.md:
##########
@@ -20,162 +20,236 @@
-->
# 集群版
-
-以本地环境为例，演示 IoTDB 集群的启动、扩容与缩容。
-
-**注意：本文档为使用本地不同端口，进行伪分布式环境部署的教程，仅用于练习。在真实环境部署时，一般不需要修改节点端口，仅需配置节点 IPV4 地址或域名即可。**
-
-## 1. 准备启动环境
-
-解压 apache-iotdb-1.0.0-all-bin.zip 至 cluster0 目录。
-
-## 2. 启动最小集群
-
-在 Linux 环境中，部署 1 个 ConfigNode 和 1 个 DataNode（1C1D）集群版，默认 1 副本：
-```
-./cluster0/sbin/start-confignode.sh
-./cluster0/sbin/start-datanode.sh
-```
-
-## 3. 验证最小集群
-
-+ 最小集群启动成功，启动 Cli 进行验证：
-```
-./cluster0/sbin/start-cli.sh
-```
-
-+ 在 Cli 执行 [show cluster details](https://iotdb.apache.org/zh/UserGuide/Master/Maintenance-Tools/Maintenance-Command.html#%E6%9F%A5%E7%9C%8B%E5%85%A8%E9%83%A8%E8%8A%82%E7%82%B9%E4%BF%A1%E6%81%AF)
- 指令，结果如下所示：
-```
-IoTDB> show cluster details
-+------+----------+-------+---------------+------------+-------------------+----------+-------+--------+-------------------+-----------------+
-|NodeID| NodeType| Status|InternalAddress|InternalPort|ConfigConsensusPort|RpcAddress|RpcPort|MppPort |SchemaConsensusPort|DataConsensusPort|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+--------+-------------------+-----------------+
-| 0|ConfigNode|Running| 127.0.0.1| 10710| 10720| | | | | |
-| 1| DataNode|Running| 127.0.0.1| 10730| | 127.0.0.1| 6667| 10740| 10750| 10760|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+--------+-------------------+-----------------+
-Total line number = 2
-It costs 0.242s
-```
-
-## 4. 准备扩容环境
-
-解压 apache-iotdb-1.0.0-all-bin.zip 至 cluster1 目录和 cluster2 目录
-
-## 5. 修改节点配置文件
-
-对于 cluster1 目录：
-
-+ 修改 ConfigNode 配置：
-
-| **配置项** | **值** |
-|--------------------------------|-----------------|
-| cn\_internal\_address | 127.0.0.1 |
-| cn\_internal\_port | 10711 |
-| cn\_consensus\_port | 10721 |
-| cn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-+ 修改 DataNode 配置：
-
-| **配置项** | **值** |
-|----------------------------------------|-----------------|
-| dn\_rpc\_address | 127.0.0.1 |
-| dn\_rpc\_port | 6668 |
-| dn\_internal\_address | 127.0.0.1 |
-| dn\_internal\_port | 10731 |
-| dn\_mpp\_data\_exchange\_port | 10741 |
-| dn\_schema\_region\_consensus\_port | 10751 |
-| dn\_data\_region\_consensus\_port | 10761 |
-| dn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-对于 cluster2 目录：
-
-+ 修改 ConfigNode 配置：
-
-| **配置项** | **值** |
-|--------------------------------|-----------------|
-| cn\_internal\_address | 127.0.0.1 |
-| cn\_internal\_port | 10712 |
-| cn\_consensus\_port | 10722 |
-| cn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-+ 修改 DataNode 配置：
-
-| **配置项** | **值** |
-|--------------------------------------|-----------------|
-| dn\_rpc\_address | 127.0.0.1 |
-| dn\_rpc\_port | 6669 |
-| dn\_internal\_address | 127.0.0.1 |
-| dn\_internal\_port | 10732 |
-| dn\_mpp\_data\_exchange\_port | 10742 |
-| dn\_schema\_region\_consensus\_port | 10752 |
-| dn\_data\_region\_consensus\_port | 10762 |
-| dn\_target\_config\_node\_list | 127.0.0.1:10710 |
-
-## 6. 集群扩容
-
-将集群扩容至 3 个 ConfigNode 和 3 个 DataNode（3C3D）集群版，
-指令执行顺序为先启动 ConfigNode，再启动 DataNode：
-```
-./cluster1/sbin/start-confignode.sh
-./cluster2/sbin/start-confignode.sh
-./cluster1/sbin/start-datanode.sh
-./cluster2/sbin/start-datanode.sh
-```
-
-## 7. 验证扩容结果
-
-在 Cli 执行 `show cluster details`，结果如下：
-```
-IoTDB> show cluster details
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-|NodeID| NodeType| Status|InternalAddress|InternalPort|ConfigConsensusPort|RpcAddress|RpcPort|MppPort|SchemaConsensusPort|DataConsensusPort|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-| 0|ConfigNode|Running| 127.0.0.1| 10710| 10720| | | | | |
-| 2|ConfigNode|Running| 127.0.0.1| 10711| 10721| | | | | |
-| 3|ConfigNode|Running| 127.0.0.1| 10712| 10722| | | | | |
-| 1| DataNode|Running| 127.0.0.1| 10730| | 127.0.0.1| 6667| 10740| 10750| 10760|
-| 4| DataNode|Running| 127.0.0.1| 10731| | 127.0.0.1| 6668| 10741| 10751| 10761|
-| 5| DataNode|Running| 127.0.0.1| 10732| | 127.0.0.1| 6669| 10742| 10752| 10762|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-Total line number = 6
-It costs 0.012s
-```
-
-## 8. 集群缩容
-
-+ 缩容一个 ConfigNode：
-```
-# 使用 ip:port 移除
-./cluster0/sbin/remove-confignode.sh 127.0.0.1:10711
-
-# 使用节点编号移除
-./cluster0/sbin/remove-confignode.sh 2
-```
-
-+ 缩容一个 DataNode：
-```
-# 使用 ip:port 移除
-./cluster0/sbin/remove-datanode.sh 127.0.0.1:6668
-
-# 使用节点编号移除
-./cluster0/sbin/remove-confignode.sh 4
-```
-
-## 9. 验证缩容结果
-
-在 Cli 执行 `show cluster details`，结果如下：
-```
-IoTDB> show cluster details
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-|NodeID| NodeType| Status|InternalAddress|InternalPort|ConfigConsensusPort|RpcAddress|RpcPort|MppPort|SchemaConsensusPort|DataConsensusPort|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-| 0|ConfigNode|Running| 127.0.0.1| 10710| 10720| | | | | |
-| 3|ConfigNode|Running| 127.0.0.1| 10712| 10722| | | | | |
-| 1| DataNode|Running| 127.0.0.1| 10730| | 127.0.0.1| 6667| 10740| 10750| 10760|
-| 5| DataNode|Running| 127.0.0.1| 10732| | 127.0.0.1| 6669| 10742| 10752| 10762|
-+------+----------+-------+---------------+------------+-------------------+----------+-------+-------+-------------------+-----------------+
-Total line number = 4
-It costs 0.005s
+本文将简单介绍 IoTDB 集群的安装配置、扩容和缩容等常规操作。
+更多信息见:
+[集群基本概念](../Cluster/Cluster-Concept.md)
Review Comment:
这几个文档目前不对外开放了
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: reviews-unsubscribe@iotdb.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [iotdb-docs] changxue2022 closed pull request #47: rewrite the cluster quickStart part, fix a bad link of cluster
Posted by "changxue2022 (via GitHub)" <gi...@apache.org>.
changxue2022 closed pull request #47: rewrite the cluster quickStart part, fix a bad link of cluster
URL: https://github.com/apache/iotdb-docs/pull/47
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: reviews-unsubscribe@iotdb.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org