You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@singa.apache.org by Wang Wei <wa...@comp.nus.edu.sg> on 2015/09/22 07:23:15 UTC
[VOTE] Release apache-singa-0.1.0-incubating (RC1)
Hi all,
I have created a build for Apache SINGA 0.1.0-incubating, release candidate
RC1.
The artifacts to be voted on are located here:
https://dist.apache.org/repos/dist/dev/incubator/singa/
The hashes of the artifacts are as follows:
apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05 07 A7
D1 93 9D 1C A6
apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E
F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
Release artifacts are signed with the following key:
https://people.apache.org/keys/committer/dinhtta.asc
and the signature file is:
apache-singa-0.1.0-incubating.tar.gz.asc
Please check and vote on releasing this package. The vote is open for at
least 72 hours and passes if a majority of at least three +1 votes are cast.
[ ] +1 Release this package as Apache SINGA 0.1.0-incubating
[ ] 0 I don't feel strongly about it, but I'm okay with the release
[ ] -1 Do not release this package because...
Here is my vote:
+1
Regards,
Wang Wei
RE: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by Xiezhongle <xi...@comp.nus.edu.sg>.
+1.
I have checked the following items on a clean ubuntu system:
1.The whole installation procedure, including all third party=20 installation.
2.The cifar example.
3.The license.
Best,
zhongle
-----Original Message-----
From: wangwei.cs@gmail.com [mailto:wangwei.cs@gmail.com] On Behalf Of Wang Wei
Sent: Tuesday, 22 September, 2015 1:23 PM
To: dev@singa.incubator.apache.org
Subject: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Hi all,
I have created a build for Apache SINGA 0.1.0-incubating, release candidate RC1.
The artifacts to be voted on are located here:
https://dist.apache.org/repos/dist/dev/incubator/singa/
The hashes of the artifacts are as follows:
apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05 07 A7
D1 93 9D 1C A6
apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
Release artifacts are signed with the following key:
https://people.apache.org/keys/committer/dinhtta.asc
and the signature file is:
apache-singa-0.1.0-incubating.tar.gz.asc
Please check and vote on releasing this package. The vote is open for at least 72 hours and passes if a majority of at least three +1 votes are cast.
[ ] +1 Release this package as Apache SINGA 0.1.0-incubating
[ ] 0 I don't feel strongly about it, but I'm okay with the release
[ ] -1 Do not release this package because...
Here is my vote:
+1
Regards,
Wang Wei
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by kaiping <ka...@comp.nus.edu.sg>.
Hi all,
I have checked:
+ RNNLM source code
+ RNNLM configure files
+ RNNLM compilation and execution results
+ Compare the execution results with rnnlm toolkit’s results
I think we need to do the following modifications in
/examples/rnnlm/job.conf:
1. Line5: “test_steps:683” -> “valid_steps:683”
2. Line6: “test_freq:8135” -> “valid_freq:8135”
3. Line39: In training phase, “exclude: kTest” -> “exclude:
kValidation”
Best regards,
Kaiping
On 2015-09-22 13:23, Wang Wei wrote:
> Hi all,
>
> I have created a build for Apache SINGA 0.1.0-incubating, release
> candidate
> RC1.
>
> The artifacts to be voted on are located here:
>
> https://dist.apache.org/repos/dist/dev/incubator/singa/
>
>
> The hashes of the artifacts are as follows:
>
> apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05
> 07 A7
> D1 93 9D 1C A6
>
> apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E
> F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
>
> Release artifacts are signed with the following key:
>
> https://people.apache.org/keys/committer/dinhtta.asc
>
> and the signature file is:
>
> apache-singa-0.1.0-incubating.tar.gz.asc
>
> Please check and vote on releasing this package. The vote is open for
> at
> least 72 hours and passes if a majority of at least three +1 votes are
> cast.
>
> [ ] +1 Release this package as Apache SINGA 0.1.0-incubating
>
> [ ] 0 I don't feel strongly about it, but I'm okay with the release
>
> [ ] -1 Do not release this package because...
>
>
> Here is my vote:
>
> +1
>
> Regards,
>
> Wang Wei
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by WANG Sheng <wa...@comp.nus.edu.sg>.
1. Configure and Compile: pass
2. Running Examples:
cifar10: pass
mnist: pass
rbm: pass
rnnlm: pass
3. Distributed Running:
cifar10: pass
4. License in each file: pass
My vote: +1
Regards,
Wang Sheng
On Tue, Sep 22, 2015 at 1:23 PM, Wang Wei <wa...@comp.nus.edu.sg> wrote:
> Hi all,
>
> I have created a build for Apache SINGA 0.1.0-incubating, release candidate
> RC1.
>
> The artifacts to be voted on are located here:
>
> https://dist.apache.org/repos/dist/dev/incubator/singa/
>
>
> The hashes of the artifacts are as follows:
>
> apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05 07 A7
> D1 93 9D 1C A6
>
> apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E
> F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
>
> Release artifacts are signed with the following key:
>
> https://people.apache.org/keys/committer/dinhtta.asc
>
> and the signature file is:
>
> apache-singa-0.1.0-incubating.tar.gz.asc
>
> Please check and vote on releasing this package. The vote is open for at
> least 72 hours and passes if a majority of at least three +1 votes are
> cast.
>
> [ ] +1 Release this package as Apache SINGA 0.1.0-incubating
>
> [ ] 0 I don't feel strongly about it, but I'm okay with the release
>
> [ ] -1 Do not release this package because...
>
>
> Here is my vote:
>
> +1
>
> Regards,
>
> Wang Wei
>
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by Anh Dinh <di...@comp.nus.edu.sg>.
+1
I've checked:
+ Can build from source
+ Signature and hashes are correct.
+ No binaries
+ Source files contain appropriate headers
+ LICENSE, NOTICE, DISCLAIMER files are correct
+ RELEASE_NOTES, README are there
Anh.
On 22 September 2015 at 13:23, Wang Wei <wa...@comp.nus.edu.sg> wrote:
> Hi all,
>
> I have created a build for Apache SINGA 0.1.0-incubating, release candidate
> RC1.
>
> The artifacts to be voted on are located here:
>
> https://dist.apache.org/repos/dist/dev/incubator/singa/
>
>
> The hashes of the artifacts are as follows:
>
> apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05 07 A7
> D1 93 9D 1C A6
>
> apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E
> F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
>
> Release artifacts are signed with the following key:
>
> https://people.apache.org/keys/committer/dinhtta.asc
>
> and the signature file is:
>
> apache-singa-0.1.0-incubating.tar.gz.asc
>
> Please check and vote on releasing this package. The vote is open for at
> least 72 hours and passes if a majority of at least three +1 votes are
> cast.
>
> [ ] +1 Release this package as Apache SINGA 0.1.0-incubating
>
> [ ] 0 I don't feel strongly about it, but I'm okay with the release
>
> [ ] -1 Do not release this package because...
>
>
> Here is my vote:
>
> +1
>
> Regards,
>
> Wang Wei
>
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by ooibc <oo...@comp.nus.edu.sg>.
Thanks.
The fortran compiler is a dependency of OpenBLAS.
We will update the README file for the time being, and as a longer term
solution, we will replace OpenBLAS with our own codes.
regards
beng chin
On 2015-09-25 01:12, Alan Gates wrote:
> +0
>
> I checked the LICENSE, NOTICE, and DISCLAIMER files, as well as the
> signatures. All these looked good. I checked that there did not appear
> to be in binaries in the distribution. I also checked for all of the
> source files having appropriate Apache headers.
>
> Issues I saw:
> * There is one source file that's missing a header,
> ./src/test/test_common.cc. This should be fixed but it can be done
> subsequent to the release.
> * I could not get the system to build. When I ran ./configure it said
> "configure: error: unable to find cblas_sgemm() function" I could not
> find a package for openblas, and when I downloaded the source for that
> and tried to build it said I needed a fortran compiler. That's when I
> bailed out.
>
> I am voting +0 because I don't think the build issue is sufficient to
> block the release. But if I had trouble building I suspect others will
> as well. If people can't build your software they are much less likely
> to use it. So I think it would be in your best interest to resolve the
> build issue soon.
>
> If there are simple steps to resolve the build issue then documenting
> them in the README would be very helpful. For example pointers to
> where a binary version of openblas can be obtained, if such a place
> exists (and any other libraries not readily obtainable by yum or
> apt-get). If openblas must be built then some help on how to do so
> (hopefully without installing a fortran compiler) would be good.
>
> Other miscellaneous advice:
> * It would be very helpful to have an Apache Rat target in your
> makefile. Rat gives you a quick way to check for file missing licenses
> and some other issues. I had to do it by hand this time.
>
> Alan.
>
>> zhaojing
>> September 23, 2015 at 2:25
>> +1
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by Alan Gates <al...@gmail.com>.
+0
I checked the LICENSE, NOTICE, and DISCLAIMER files, as well as the
signatures. All these looked good. I checked that there did not appear
to be in binaries in the distribution. I also checked for all of the
source files having appropriate Apache headers.
Issues I saw:
* There is one source file that's missing a header,
./src/test/test_common.cc. This should be fixed but it can be done
subsequent to the release.
* I could not get the system to build. When I ran ./configure it said
"configure: error: unable to find cblas_sgemm() function" I could not
find a package for openblas, and when I downloaded the source for that
and tried to build it said I needed a fortran compiler. That's when I
bailed out.
I am voting +0 because I don't think the build issue is sufficient to
block the release. But if I had trouble building I suspect others will
as well. If people can't build your software they are much less likely
to use it. So I think it would be in your best interest to resolve the
build issue soon.
If there are simple steps to resolve the build issue then documenting
them in the README would be very helpful. For example pointers to where
a binary version of openblas can be obtained, if such a place exists
(and any other libraries not readily obtainable by yum or apt-get). If
openblas must be built then some help on how to do so (hopefully without
installing a fortran compiler) would be good.
Other miscellaneous advice:
* It would be very helpful to have an Apache Rat target in your
makefile. Rat gives you a quick way to check for file missing licenses
and some other issues. I had to do it by hand this time.
Alan.
> zhaojing <ma...@comp.nus.edu.sg>
> September 23, 2015 at 2:25
> +1
>
>
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by Jinyang Gao <ji...@comp.nus.edu.sg>.
+1
I've checked:
1 the installation of SINGA and all thirdparty libs
2 the licenses of thirdparty libs and codes
3 the examples
Best Regards
-Jinyang
On Wed, Sep 23, 2015 at 5:41 PM, zhaojing <zh...@comp.nus.edu.sg> wrote:
> +1
>
> I've checked:
> + RBM model source code
> + RBM model configure file
>
> Best Regards,
> Zhaojing.
>
>
> On 2015-09-23 17:25, zhaojing wrote:
>
>> +1
>> On 2015-09-22 13:23, Wang Wei wrote:
>>
>>> Hi all,
>>>
>>> I have created a build for Apache SINGA 0.1.0-incubating, release
>>> candidate
>>> RC1.
>>>
>>> The artifacts to be voted on are located here:
>>>
>>> https://dist.apache.org/repos/dist/dev/incubator/singa/
>>>
>>>
>>> The hashes of the artifacts are as follows:
>>>
>>> apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05 07
>>> A7
>>> D1 93 9D 1C A6
>>>
>>> apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E
>>> F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
>>>
>>> Release artifacts are signed with the following key:
>>>
>>> https://people.apache.org/keys/committer/dinhtta.asc
>>>
>>> and the signature file is:
>>>
>>> apache-singa-0.1.0-incubating.tar.gz.asc
>>>
>>> Please check and vote on releasing this package. The vote is open for at
>>> least 72 hours and passes if a majority of at least three +1 votes are
>>> cast.
>>>
>>> [ ] +1 Release this package as Apache SINGA 0.1.0-incubating
>>>
>>> [ ] 0 I don't feel strongly about it, but I'm okay with the release
>>>
>>> [ ] -1 Do not release this package because...
>>>
>>>
>>> Here is my vote:
>>>
>>> +1
>>>
>>> Regards,
>>>
>>> Wang Wei
>>>
>>
>
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by zhaojing <zh...@comp.nus.edu.sg>.
+1
I've checked:
+ RBM model source code
+ RBM model configure file
Best Regards,
Zhaojing.
On 2015-09-23 17:25, zhaojing wrote:
> +1
> On 2015-09-22 13:23, Wang Wei wrote:
>> Hi all,
>>
>> I have created a build for Apache SINGA 0.1.0-incubating, release
>> candidate
>> RC1.
>>
>> The artifacts to be voted on are located here:
>>
>> https://dist.apache.org/repos/dist/dev/incubator/singa/
>>
>>
>> The hashes of the artifacts are as follows:
>>
>> apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05
>> 07 A7
>> D1 93 9D 1C A6
>>
>> apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49
>> E519145E
>> F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
>>
>> Release artifacts are signed with the following key:
>>
>> https://people.apache.org/keys/committer/dinhtta.asc
>>
>> and the signature file is:
>>
>> apache-singa-0.1.0-incubating.tar.gz.asc
>>
>> Please check and vote on releasing this package. The vote is open for
>> at
>> least 72 hours and passes if a majority of at least three +1 votes are
>> cast.
>>
>> [ ] +1 Release this package as Apache SINGA 0.1.0-incubating
>>
>> [ ] 0 I don't feel strongly about it, but I'm okay with the release
>>
>> [ ] -1 Do not release this package because...
>>
>>
>> Here is my vote:
>>
>> +1
>>
>> Regards,
>>
>> Wang Wei
Re: [VOTE] Release apache-singa-0.1.0-incubating (RC1)
Posted by zhaojing <zh...@comp.nus.edu.sg>.
+1
On 2015-09-22 13:23, Wang Wei wrote:
> Hi all,
>
> I have created a build for Apache SINGA 0.1.0-incubating, release
> candidate
> RC1.
>
> The artifacts to be voted on are located here:
>
> https://dist.apache.org/repos/dist/dev/incubator/singa/
>
>
> The hashes of the artifacts are as follows:
>
> apache-singa-0.1.0-incubating.tar.gz.md5: AB 66 B1 C9 FC 25 C8 0F 05
> 07 A7
> D1 93 9D 1C A6
>
> apache-singa-0.1.0-incubating.tar.gz.sha256: 6820E74A 84D8AF49 E519145E
> F44B0E4D 58140327 659B170B 715A7D65 3068E0E3
>
> Release artifacts are signed with the following key:
>
> https://people.apache.org/keys/committer/dinhtta.asc
>
> and the signature file is:
>
> apache-singa-0.1.0-incubating.tar.gz.asc
>
> Please check and vote on releasing this package. The vote is open for
> at
> least 72 hours and passes if a majority of at least three +1 votes are
> cast.
>
> [ ] +1 Release this package as Apache SINGA 0.1.0-incubating
>
> [ ] 0 I don't feel strongly about it, but I'm okay with the release
>
> [ ] -1 Do not release this package because...
>
>
> Here is my vote:
>
> +1
>
> Regards,
>
> Wang Wei