You are viewing a plain text version of this content. The canonical link for it is here.
Posted to log4j-dev@logging.apache.org by ca...@apache.org on 2007/05/11 17:36:56 UTC
svn commit: r537211 [3/3] - in /logging/log4j/branches/v1_2-branch/src:
changes/changes.xml site/apt/books.apt site/apt/index.apt
site/apt/publications.apt site/apt/roadmap.apt site/fml/faq.fml site/site.xml
Modified: logging/log4j/branches/v1_2-branch/src/site/apt/index.apt
URL: http://svn.apache.org/viewvc/logging/log4j/branches/v1_2-branch/src/site/apt/index.apt?view=diff&rev=537211&r1=537210&r2=537211
==============================================================================
--- logging/log4j/branches/v1_2-branch/src/site/apt/index.apt (original)
+++ logging/log4j/branches/v1_2-branch/src/site/apt/index.apt Fri May 11 08:36:55 2007
@@ -1,135 +1,70 @@
+~~ Licensed to the Apache Software Foundation (ASF) under one or more
+~~ contributor license agreements. See the NOTICE file distributed with
+~~ this work for additional information regarding copyright ownership.
+~~ The ASF licenses this file to You under the Apache License, Version 2.0
+~~ (the "License"); you may not use this file except in compliance with
+~~ the License. You may obtain a copy of the License at
+~~
+~~ http://www.apache.org/licenses/LICENSE-2.0
+~~
+~~ Unless required by applicable law or agreed to in writing, software
+~~ distributed under the License is distributed on an "AS IS" BASIS,
+~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+~~ See the License for the specific language governing permissions and
+~~ limitations under the License.
------
- What is Maven?
+ log4j 1.2
------
- Jason van Zyl
------
- 12 October 2005
------
-Introduction
+ Inserting log statements into your code is a low-tech method
+ for debugging it. It may also be the only way because
+ debuggers are not always available or applicable. This is
+ often the case for distributed applications.
+
+ On the other hand, some people argue that log statements
+ pollute source code and decrease legibility. (We believe that
+ the contrary is true). In the Java language where a
+ preprocessor is not available, log statements increase the
+ size of the code and reduce its speed, even when logging is
+ turned off. Given that a reasonably sized application may
+ contain thousands of log statements, speed is of particular
+ importance.
+
+
+ With log4j it is possible to enable logging at runtime
+ without modifying the application binary. The log4j package is
+ designed so that these statements can remain in shipped code
+ without incurring a heavy performance cost. Logging behavior
+ can be controlled by editing a configuration file, without
+ touching the application binary.
+
+ Logging equips the developer with detailed context for
+ application failures. On the other hand, testing provides
+ quality assurance and confidence in the application. Logging
+ and testing should not be confused. They are
+ complementary. When logging is wisely used, it can prove to be
+ an essential tool.
+
+ One of the distinctive features of log4j is the notion of
+ inheritance in loggers. Using a logger
+ hierarchy it is possible to control which log
+ statements are output at arbitrarily fine granularity but also
+ great ease. This helps reduce the volume of logged output and
+ minimize the cost of logging.
+
+ The target of the log output can be a file, an
+ OutputStream, a java.io.Writer, a
+ remote log4j server, a remote Unix Syslog daemon, or many other output targets.
+
+ On an AMD Duron clocked at 800Mhz running JDK 1.3.1, it costs
+ about 5 nanoseconds to determine if a logging statement should
+ be logged or not. Actual logging is also quite fast, ranging
+ from 21 microseconds using the SimpleLayout, 37
+ microseconds using the TTCCLayout. The performance of the
+ PatternLayout is almost as good as the dedicated layouts,
+ except that it is much more flexible.
- Maven was originally started as an attempt to simplify the build
- processes in the Jakarta Turbine project. There were several
- projects each with their own Ant build files that were all slightly
- different and JARs were checked into CVS. We wanted a standard way to
- build the projects, a clear definition of what the project consisted
- of, an easy way to publish project information and a way to share JARs
- across several projects.
-
- The result is a tool that can now be used for building and managing
- any Java-based project. We hope that we have created something that
- will make the day-to-day work of Java developers easier and generally
- help with the comprehension of any Java-based project.
-
-Maven's Objectives
-
- Maven's primary goal is to allow a developer to comprehend the
- complete state of a development effort in the shortest period of
- time. In order to attain this goal there are several areas of concern
- that Maven attempts to deal with:
-
- * Making the build process easy
-
- * Providing a uniform build system
-
- * Providing quality project information
-
- * Providing guidelines for best practices development
-
- * Allowing transparent migration to new features
-
-* Making the build process easy
-
- While using Maven doesn't eliminate the need to know about the
- underlying mechanisms, Maven does provide a lot of shielding
- from the details.
-
-* Providing a uniform build system
-
- Maven allows a project to build using its project object model (POM) and
- a set of plugins that are shared by all projects using
- Maven, providing a uniform build system. Once you familiarize yourself
- with how one Maven project builds you automatically know how all Maven
- projects build saving you immense amounts of time when trying to
- navigate many projects.
-
-* Providing quality project information
-
- Maven provides plenty of useful project information that is in
- part taken from your POM and in part generated from your project's
- sources. For example, Maven can provide:
-
- * Change log document created directly from source control
-
- * Cross referenced sources
-
- * Mailing lists
-
- * Dependency list
-
- * Unit test reports including coverage
-
- []
-
- As Maven improves the information set provided will improve, all of
- which will be transparent to users of Maven.
-
- Other products can also provide Maven plugins to allow their set of
- project information alongside some of the standard information given by
- Maven, all still based on the POM.
-
-* Providing guidelines for best practices development
-
- Maven aims to gather current principles for best practices development, and
- make it easy to guide a project in that direction.
-
- For example, specification, execution, and reporting of unit tests are part of
- the normal build cycle using Maven.
- Current unit testing best practices were used as guidelines:
-
- * Keeping your test source code in a separate, but parallel source tree
-
- * Using test case naming conventions to locate and execute tests
-
- * Have test cases setup their environment and don't rely on customizing the build for test preparation.
-
- []
-
- Maven also aims to assist in project workflow such as release management and
- issue tracking.
-
- Maven also suggests some guidelines on how to layout your project's directory structure
- so that once you learn the layout you can easily navigate any other project that uses
- Maven and the same defaults.
-
-* Allowing transparent migration to new features
-
- Maven provides an easy way for Maven clients to update their installations
- so that they can take advantage of any changes that been made to
- Maven itself.
-
- Installation of new or updated plugins from third parties or Maven itself has
- been made trivial for this reason.
-
-What is Maven Not?
-
- You may have heard some of the following things about Maven:
-
- * Maven is a site and documentation tool
-
- * Maven extends Ant to let you download dependencies
-
- * Maven is a set of reusable Ant scriptlets
-
- []
-
- While Maven does these things, as you can read above in the "What is Maven?" section,
- these are not the only features Maven has, and its objectives are quite different.
-
- Maven does encourage best practices, but we realise that some projects may not fit with
- these ideals for historical reasons. While Maven is designed to be flexible, to an extent, in these
- situations and to the needs of different projects, it can not cater to every situation without making
- compromises to the integrity of its objectives.
-
- If you decide to use Maven, and have an unusual build structure that you cannot reorganise, you may
- have to forgo some features or the use of Maven altogether.
+ The package is being constantly improved thanks to input from
+ users and code contributed by authors in the community.
Copied: logging/log4j/branches/v1_2-branch/src/site/apt/publications.apt (from r535385, logging/log4j/branches/v1_2-branch/src/site/apt/books.apt)
URL: http://svn.apache.org/viewvc/logging/log4j/branches/v1_2-branch/src/site/apt/publications.apt?view=diff&rev=537211&p1=logging/log4j/branches/v1_2-branch/src/site/apt/books.apt&r1=535385&p2=logging/log4j/branches/v1_2-branch/src/site/apt/publications.apt&r2=537211
==============================================================================
--- logging/log4j/branches/v1_2-branch/src/site/apt/books.apt (original)
+++ logging/log4j/branches/v1_2-branch/src/site/apt/publications.apt Fri May 11 08:36:55 2007
@@ -1,61 +1,83 @@
+~~ Licensed to the Apache Software Foundation (ASF) under one or more
+~~ contributor license agreements. See the NOTICE file distributed with
+~~ this work for additional information regarding copyright ownership.
+~~ The ASF licenses this file to You under the Apache License, Version 2.0
+~~ (the "License"); you may not use this file except in compliance with
+~~ the License. You may obtain a copy of the License at
+~~
+~~ http://www.apache.org/licenses/LICENSE-2.0
+~~
+~~ Unless required by applicable law or agreed to in writing, software
+~~ distributed under the License is distributed on an "AS IS" BASIS,
+~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+~~ See the License for the specific language governing permissions and
+~~ limitations under the License.
------
- Maven Features
+ log4j 1.2 Publications
------
- Jason van Zyl
+ Curt Arnold
------
- 12 October 2005
+ 8 May 2007
------
-Feature Summary
- The following are the key features of Maven in a nutshell:
+Books
- * Simple project setup that follows best practices - get a new project or module started in seconds
-
- * Consistent usage across all projects means no ramp up time for new developers coming onto a project
-
- * Superior dependency management including automatic updating, dependency closures (also known as transitive dependencies)
-
- * Able to easily work with multiple projects at the same time
-
- * A large and growing repository of libraries and metadata to use out of the box, and arrangements in place with the largest Open Source projects for
- real-time availability of their latest releases
-
- * Extensible, with the ability to easily write plugins in Java or scripting languages
-
- * Instant access to new features with little or no extra configuration
-
- * Ant tasks for dependency management and deployment outside of Maven
-
- * Model based builds:
- Maven is able to build any number of projects into predefined output types
- such as a JAR, WAR, or distribution based on metadata about the project, without
- the need to do any scripting in most cases.
-
- * Coherent site of project information:
- Using the same metadata as for the build process, Maven is able to generate a
- web site or PDF including any documentation you care to add, and adds to that
- standard reports about the state of development of the project.
- Examples of this information can be seen at the bottom of the left-hand navigation of
- this site under the "Project Information" and "Project Reports" submenus.
-
- * Release management and distribution publication:
- Without much additional configuration, Maven will integrate with your source control
- system such as CVS and manage the release of a project based on a certain tag.
- It can also publish this to a distribution location for use by other projects.
- Maven is able to publish individual outputs such as a JAR, an archive including other
- dependencies and documentation, or as a source distribution.
-
- * Dependency management:
- Maven encourages the use of a central repository of JARs and other dependencies. Maven
- comes with a mechanism that your project's clients can use to
- download any JARs required for building your project from a
- central JAR repository much like Perl's CPAN. This allows users
- of Maven to reuse JARs across projects and encourages communication
- between projects to ensure that backward compatibility issues are
- dealt with. We are collaborating with the folks at {{{http://www.ibiblio.org}Ibiblio}} who have graciously
- allowed the central repository to live on their servers.
+ * Ceki G\xFClc\xFC. 2004. The complete log4j manual. QoS.ch. {{{http://www.qos.ch/shop/products/eclm/}http://www.qos.ch/shop/products/eclm/}}.
+
+ * Samudra Gupta. 2007. Pro Apache log4j, Second Edition. APress.
+
+Articles:
+
+ * Vipan Singla. Don't Use System.out.println! Use Log4j.
+ {{{http://www.vipan.com/htdocs/log4jhelp.html}http://www.vipan.com/htdocs/log4jhelp.html}}.
+
+ * Vikran Goyal. Build Flexible Logs With log4j.
+ {{{http://www.onjava.com/pub/a/onjava/2002/08/07/log4j.html}http://www.onjava.com/pub/a/onjava/2002/08/07/log4j.html}}.
+
+ * Ashley J.S. Mills. Log4J.
+ {{{http://supportweb.cs.bham.ac.uk/documentation/tutorials/docsystem/build/tutorials/log4j/log4j.html}http://supportweb.cs.bham.ac.uk/documentation/tutorials/docsystem/build/tutorials/log4j/log4j.html}}.
+
+ * Kevin Brown. Add logging to your Java Applications.
+ {{{http://www.builder.com.com/article.jhtml?id=u00820020124kev01.htm}
+ http://www.builder.com.com/article.jhtml?id=u00820020124kev01.htm}}
+
+ * Kevin Brown. How does the Java logging API stack up against log4j?
+ {{{http://www.builder.com.com/article.jhtml?id=u00220020724kev01.htm}
+ http://www.builder.com.com/article.jhtml?id=u00220020724kev01.htm}}.
+
+ * Michael Canzoneri. Log4J FAQ. {{{http://www.jguru.com/faq/Log4j}http://www.jguru.com/faq/Log4j}}.
+
+ * Ceki G\xFClc\xFC. Think Again.
+ {{{http://www.qos.ch/logging/thinkAgain.html}http://www.qos.ch/logging/thinkAgain.html}}.
+
+ * Ceki G\xFClc\xFC. Supporting the log4j RepositorySelector.
+ {{{http://www.qos.ch/logging/sc.html}http://www.qos.ch/logging/sc.html}}.
+
+ * Ceki G\xFClc\xFC. Log4j delivers control over logging.
+ {{{http://www.javaworld.com/jw-11-2000/jw-1122-log4j.html}http://www.javaworld.com/jw-11-2000/jw-1122-log4j.html}}.
+
+ * Vikram Goyal. Understanding Classloaders: log4j in a J2EE Environment.
+ {{{http://www.onjava.com/pub/a/onjava/2003/04/02/log4j_ejb.html}http://www.onjava.com/pub/a/onjava/2003/04/02/log4j_ejb.html}}.
+
+ * Ruth Zamorano and Rafeal Luque. Instant logging: Harness the power of log4j with Jabber.
+ {{{http://www-106.ibm.com/developerworks/java/library/j-instlog/}http://www-106.ibm.com/developerworks/java/library/j-instlog/}}.
+
+ * Matthew Litkey, Jay Galvin, and Marina Sum.
+ Developer Tip: Adding the log4j API to Applications on Sun Java System Application Server 7
+ {{{http://developers.sun.com/prodtech/appserver/reference/techart/log4j.html}http://developers.sun.com/prodtech/appserver/reference/techart/log4j.html}}.
+
+ * Sean C. Sullivan. Reporting Application Errors by Email.
+ {{{http://www.onjava.com/pub/a/onjava/2004/09/29/smtp-logging.html}http://www.onjava.com/pub/a/onjava/2004/09/29/smtp-logging.html}}.
+
+
+Presentations:
- []
+ * John Munsch. Log4J In 30 Minutes Or Less.
+ {{{http://www.johnmunsch.com/projects/Presentations/}http://www.johnmunsch.com/projects/Presentations/}}.
-~~ this needs to be greatly expanded and is too detailed here ... jvz
+ * Ceki G\xFClc\xFC. Log4j, a logging package for the Java language.
+ {{{http://www.qos.ch/ac2001/F11-10.html}http://www.qos.ch/ac2001/F11-10.html}}.
+
+ * Brent Twenter. Log4j. {{{http://www.ociweb.com/javasig/knowledgebase/January2001/Log4J.ppt}http://www.ociweb.com/javasig/knowledgebase/January2001/Log4J.ppt}}.
+
\ No newline at end of file
Modified: logging/log4j/branches/v1_2-branch/src/site/apt/roadmap.apt
URL: http://svn.apache.org/viewvc/logging/log4j/branches/v1_2-branch/src/site/apt/roadmap.apt?view=diff&rev=537211&r1=537210&r2=537211
==============================================================================
--- logging/log4j/branches/v1_2-branch/src/site/apt/roadmap.apt (original)
+++ logging/log4j/branches/v1_2-branch/src/site/apt/roadmap.apt Fri May 11 08:36:55 2007
@@ -1,61 +1,28 @@
+~~ Licensed to the Apache Software Foundation (ASF) under one or more
+~~ contributor license agreements. See the NOTICE file distributed with
+~~ this work for additional information regarding copyright ownership.
+~~ The ASF licenses this file to You under the Apache License, Version 2.0
+~~ (the "License"); you may not use this file except in compliance with
+~~ the License. You may obtain a copy of the License at
+~~
+~~ http://www.apache.org/licenses/LICENSE-2.0
+~~
+~~ Unless required by applicable law or agreed to in writing, software
+~~ distributed under the License is distributed on an "AS IS" BASIS,
+~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+~~ See the License for the specific language governing permissions and
+~~ limitations under the License.
------
- Maven Features
+ log4j 1.2 Roadmap
------
- Jason van Zyl
+ Curt Arnold
------
- 12 October 2005
+ 8 May 2007
------
-Feature Summary
+log4j 1.2 Roadmap
- The following are the key features of Maven in a nutshell:
-
- * Simple project setup that follows best practices - get a new project or module started in seconds
-
- * Consistent usage across all projects means no ramp up time for new developers coming onto a project
-
- * Superior dependency management including automatic updating, dependency closures (also known as transitive dependencies)
-
- * Able to easily work with multiple projects at the same time
-
- * A large and growing repository of libraries and metadata to use out of the box, and arrangements in place with the largest Open Source projects for
- real-time availability of their latest releases
-
- * Extensible, with the ability to easily write plugins in Java or scripting languages
-
- * Instant access to new features with little or no extra configuration
-
- * Ant tasks for dependency management and deployment outside of Maven
-
- * Model based builds:
- Maven is able to build any number of projects into predefined output types
- such as a JAR, WAR, or distribution based on metadata about the project, without
- the need to do any scripting in most cases.
-
- * Coherent site of project information:
- Using the same metadata as for the build process, Maven is able to generate a
- web site or PDF including any documentation you care to add, and adds to that
- standard reports about the state of development of the project.
- Examples of this information can be seen at the bottom of the left-hand navigation of
- this site under the "Project Information" and "Project Reports" submenus.
-
- * Release management and distribution publication:
- Without much additional configuration, Maven will integrate with your source control
- system such as CVS and manage the release of a project based on a certain tag.
- It can also publish this to a distribution location for use by other projects.
- Maven is able to publish individual outputs such as a JAR, an archive including other
- dependencies and documentation, or as a source distribution.
-
- * Dependency management:
- Maven encourages the use of a central repository of JARs and other dependencies. Maven
- comes with a mechanism that your project's clients can use to
- download any JARs required for building your project from a
- central JAR repository much like Perl's CPAN. This allows users
- of Maven to reuse JARs across projects and encourages communication
- between projects to ensure that backward compatibility issues are
- dealt with. We are collaborating with the folks at {{{http://www.ibiblio.org}Ibiblio}} who have graciously
- allowed the central repository to live on their servers.
-
- []
-
-~~ this needs to be greatly expanded and is too detailed here ... jvz
+ log4j 1.2 is mature and future development on the log4j 1.2 branch
+ is expected to be limited to bug fixes and minor enhancements.
+ Any major new features for log4j 1.2 are likely to be developed
+ as companion products for log4j 1.2.
Modified: logging/log4j/branches/v1_2-branch/src/site/fml/faq.fml
URL: http://svn.apache.org/viewvc/logging/log4j/branches/v1_2-branch/src/site/fml/faq.fml?view=diff&rev=537211&r1=537210&r2=537211
==============================================================================
--- logging/log4j/branches/v1_2-branch/src/site/fml/faq.fml (original)
+++ logging/log4j/branches/v1_2-branch/src/site/fml/faq.fml Fri May 11 08:36:55 2007
@@ -18,20 +18,764 @@
-->
<faqs title="Frequently Asked Technical Questions">
<part id="faq">
- <faq id="scope-provided">
- <question>How do I prevent including JARs in WEB-INF/lib? I need a "compile only" scope!</question>
+
+ <faq id="1.1">
+ <question>What is log4j?</question>
+ <answer> <p>log4j is a tool to help the programmer output log statements to a
+ variety of output targets.
+ </p>
+
+ <p>In case of problems with an application, it is helpful to
+ enable logging so that the problem can be located. With log4j
+ it is possible to enable logging at runtime without modifying
+ the application binary. The log4j package is designed so that
+ log statements can remain in <i>shipped</i> code without
+ incurring a high performance cost. It follows that the speed
+ of logging (or rather not logging) is capital.
+ </p>
+
+ <p>At the same time, log output can be so voluminous that it quickly
+ becomes overwhelming. One of the distinctive features of log4j is the
+ notion of <i>hierarchical loggers</i>. Using loggers it is
+ possible to selectively control which log statements are output at
+ arbitrary granularity.
+ </p>
+
+ <p>log4j is designed with two three goals in mind:
+ reliability, speed and flexibility. There is a tight balance
+ between these requirements. We believe that log4j strikes the
+ right balance.
+ </p>
+</answer>
+ </faq>
+
+
+ <faq id="1.2"><question>Is log4j a reliable logging system?</question>
+ <answer><p>No. log4j is not reliable. It is a best-effort
+ <em>fail-stop</em> logging system.
+ </p>
+
+ <p>By fail-stop, we mean that log4j will not throw unexpected
+ exceptions at run-time potentially causing your application to
+ crash. <b>If for any reason, log4j throws an uncaught exception,
+ please send an email to the <a href="mailto:log4j-user@logging.apache.org">log4j-user@logging.apache.org</a>
+ mailing list</b>. Uncaught exceptions are handled as serious bugs
+ requiring immediate attention.
+ </p>
+
+ <p>Moreover, log4j will not revert to System.out or System.err
+ when its designated output stream is not opened, is not writable or
+ becomes full. This avoids corrupting an otherwise working program by
+ flooding the user's terminal because logging fails. However, log4j
+ will output a single message to System.err indicating that logging can
+ not be performed.
+ </p></answer></faq>
+
+ <faq id="1.3"><question>What are the prerequisites for log4j?</question>
<answer>
+ <p>Log4j versions upto and including 1.2.8 are
+ compatible with JDK 1.1.x and later. Log4j version 1.3 will
+ be compatilble with JDK 1.2 and later.
+ </p>
+
+ <p>The DOMConfigurator is based on the DOM Level 1
+ API. The DOMConfigurator.configure(Element) method will work
+ with any XML parser that will pass it a DOM tree.
+ </p>
+ <p>The DOMConfigurator.configure(String filename) method and its
+ variants require a JAXP compatible XML parser, for example <a href="http://xml.apache.org/">Xerces</a> or Sun's
+ parser. Compiling the DOMConfigurator requires the presence of a
+ JAXP parser in the classpath.
+ </p>
+
+ <p>The <code>org.apache.log4j.net.SMTPAppender</code>
+ relies on the <a href="http://java.sun.com/products/javamail/">JavaMail
+ API</a>. It has been tested with JavaMail API version
+ 1.2. The JavaMail API requires the <a href="http://java.sun.com/beans/glasgow/jaf.html">JavaBeans
+ Activation Framework</a> package.
+ </p>
+
+ <p>The <code>org.apache.log4j.net.JMSAppender</code>
+ requires the presence of the JMS API as well as JNDI.
+ </p>
+
+ <p>log4j test code relies on the <a href="http://www.junit.org">JUnit</a> testing framework.
+ </p>
+ </answer></faq>
+
+ <faq id="1.4"><question>What are the features of log4j?</question>
+ <answer>
+ <p>log4j is optimized for speed.</p>
+
+ <p>log4j is based on a named logger hierarchy.</p>
+
+ <p>log4j is fail-stop. However, altough it certainly
+ strives to ensure delivery, log4j does not guarantee that
+ each log statement will be delivered to its destination.
+ </p>
+
+ <p>log4j is thread-safe.</p>
+
+ <p>log4j is not restricted to a predefined set of
+ facilities.</p>
+
+ <p>Logging behavior can be set at runtime using a
+ configuration file. Configuration files can be property
+ files or in XML format. </p>
+
+ <p>log4j is designed to handle Java Exceptions from the
+ start.</p>
+
+ <p>log4j can direct its output to a file, the console,
+ an <code>java.io.OutputStream</code>,
+ <code>java.io.Writer</code>, a remote server using TCP, a
+ remote Unix Syslog daemon, to a remote listener using JMS,
+ to the NT EventLog or even send e-mail. </p>
+
+ <p>log4j uses 5 levels, namely DEBUG, INFO, WARN, ERROR and
+ FATAL.
+ </p>
+
+ <p>The format of the log output can be easily changed by
+ extending the <code>Layout</code>
+ class. </p>
+
+ <p>The target of the log output as well as the writing
+ strategy can be altered by implementations of the
+ <code>Appender</code> interface. </p>
+
+ <p>log4j supports multiple output appenders per logger.
+ </p>
+
+ <p>log4j supports internationalization.</p>
+ </answer></faq>
+
+ <faq id="1.5"><question>Is there example code for using log4j?</question>
+ <answer>
+ <p>See the <code>examples/</code> directory.</p>
+ </answer>
+ </faq>
+
+ <faq id="1.6">
+ <question>What documentation should I read to learn more about
+ log4j?</question>
+ <answer><p>Make sure to read the <a href="manual.html">short
+ manual</a>. It is also recommended to you read <a href="https://www.qos.ch/shop/products/log4j/log4j-Manual.jsp">The complete
+ log4j manual</a> which is much more detailed and up to
+ date. Both documents were written by Ceki Gülcü.
+ </p></answer>
+ </faq>
+
+ <faq id="1.7"><question>Is log4j thread-safe?</question>
+ <answer>
+ <p>Yes, log4j is thread-safe. Log4j components are designed to
+ be used in heavily multithreaded systems.</p>
+
+ </answer></faq>
+
+ <faq id="1.8"><question>What does log output look like?</question>
+ <answer>
+ <p>The log output can be customized in many ways. Moreover,
+ one can completely override the output format by implementing
+ one's own Layout.
+ </p>
+
+ <p>Here is an example output using <em>PatternLayout</em> with
+ the conversion pattern <b>"%r [%t] %-5p %c{2} %x - %m%n"</b>
+ </p>
+
+ <pre class="screen_output">
+176 [main] INFO examples.Sort - Populating an array of 2 elements in reverse order.
+225 [main] INFO examples.SortAlgo - Entered the sort method.
+262 [main] DEBUG SortAlgo.OUTER i=1 - Outer loop.
+276 [main] DEBUG SortAlgo.SWAP i=1 j=0 - Swapping intArray[0] = 1 and intArray[1] = 0
+290 [main] DEBUG SortAlgo.OUTER i=0 - Outer loop.
+304 [main] INFO SortAlgo.DUMP - Dump of interger array:
+317 [main] INFO SortAlgo.DUMP - Element [0] = 0
+331 [main] INFO SortAlgo.DUMP - Element [1] = 1
+343 [main] INFO examples.Sort - The next log statement should be an error message.
+346 [main] ERROR SortAlgo.DUMP - Tried to dump an uninitialized array.
+ at org.log4j.examples.SortAlgo.dump(SortAlgo.java:58)
+ at org.log4j.examples.Sort.main(Sort.java:64)
+467 [main] INFO examples.Sort - Exiting main method.
+ </pre>
+
+ <p>The first field is the number of milliseconds elapsed since
+ the start of the program. The second field is the thread
+ outputting the log statement. The third field is the level of
+ the log statement. The fourth field is the rightmost two
+ components of the logger making the log request. The fifth
+ field (just before the '-') is the <em>nested diagnostic
+ context</em> (NDC). Note the nested diagnostic context may be
+ empty as in the first two statements. The text after the '-'
+ is the message of the statement.
+ </p>
+ </answer></faq>
+
+ <faq id="1.9"><question>Why should I use log4j when JDK 1.4 already ships with a
+ logging API?</question>
+ <answer>
+
<p>
- The scope you should use for this is
- <code>provided</code>. This indicates to Maven that the dependency will be
- provided at run time by its container or the JDK, for example.
+ Although both APIs are conceptually similar, the log4j API is
+ significantly more flexible and offers many more features, too
+ numerous to be listed here. You will discover that the
+ additional features and flexibility turn out to be
+ indispensable in the context of a mission-critical
+ application.
+ </p>
+
+ <p>The open and collaborative way in which log4j is developped
+ ensures that it continues to preserve and even widen its
+ competitive edge. At some point, input from bright developers
+ from all over the world is bound to make a difference.
</p>
+ </answer>
+ </faq>
+
+
+ <faq id="2.1"><question>What are <em>Loggers</em>?</question>
+ <answer>
+
+ <p>Lggers lie at the heart of log4j. Loggers define a hierarchy and give
+ the programmer <em>run-time</em> control on which statements are
+ printed or not.
+ </p>
+
+ <p>Loggers are assigned levels. A log statement is printed
+ depending on its level <em>and</em> its logger.
+ </p>
+
+ <p>Make sure to read the <a href="manual.html">log4j manual</a>
+ for more information.
+ </p>
+ </answer></faq>
+
+<faq id="2.2"><question>How can I change log behavior at runtime?</question>
+ <answer>
+ <p>Log behavior can be set using configuration files which are parsed
+ at runtime. Using configuration files the programmer can define
+ loggers and set their levels.
+ </p>
+
+ <p>The <code>PropertyConfigurator</code> defines a particular format
+ of a configuration file. See also the <code>examples/Sort.java</code>
+ example and associated configuration files.
+ </p>
+
+ <p>Configuration files can be specified in XML. See
+ <code>log4j.dtd</code> and
+ <code>org.log4j.xml.DOMConfigurator</code> for more details.
+ </p>
+
+ <p>See the various Layout and Appender components for specific
+ configuration options.
+ </p>
+
+ <p>In addition to configuration files, the user may disable all
+ messages belonging to a set of levels. See next item.
+ </p>
+
+ </answer></faq>
+
+ <faq id="2.3"><question>What is the fastest way of (not) logging?</question>
+ <answer>
+ <p> For some logger <code>l</code>, writing,
+ </p>
+
+ <pre class="source">
+ l.debug("Entry number: " + i + " is " + String.valueOf(entry[i]));
+ </pre>
+
+ <p>incurs the cost of constructing the message parameter, that is
+ converting both integer <code>i</code> and <code>entry[i]</code> to a
+ String, and concatenating intermediate strings. This, regardless of
+ whether the message will be logged or not.
+ </p>
+
+ <p>If you are worried about speed, then write</p>
+ <pre class="source">
+ if(l.isDebugEnabled()) {
+ l.debug("Entry number: " + i + " is " + String.valueOf(entry[i]));
+ }
+ </pre>
+
+ <p>This way you will not incur the cost of parameter
+ construction if debugging is disabled for logger
+ <code>l</code>. On the other hand, if the logger is debug
+ enabled, you will incur the cost of evaluating whether the
+ logger is enabled or not, twice: once in
+ <code>debugEnabled</code> and once in <code>debug</code>.
+ This is an insignificant overhead since evaluating a logger
+ takes less than 1% of the time it takes to actually log a
+ statement.
+ </p>
+</answer></faq>
+
+ <faq id="2.4"><question>Are there any suggested ways for naming loggers?</question>
+ <answer>
+ <p>Yes, there are.</p>
+
+ <p>You can name loggers by <strong>locality</strong>. It turns out
+ that instantiating a logger in each class, with the logger name
+ equal to the fully-qualified name of the class, is a useful and
+ straightforward approach of defining loggers. This approach has
+ many benefits:
+ </p>
+
+ <ul>
+ <li>It is very simple to implement.</li>
+
+ <li>It is very simple to explain to new developers.</li>
+
+ <li>It automatically mirrors your application's own modular design.
+ </li>
+ <li>It can be further refined at will.</li>
+
+ <li>Printing the logger automatically gives information on the locality
+ of the log statement. </li>
+ </ul>
+
+ <p>However, this is not the only way for naming loggers. A
+ common alternative is to name loggers by <strong>functional
+ areas</strong>. For example, the "database" logger, "RMI"
+ logger, "security" logger, or the "XML" logger.
+ </p>
+
+ <p>You may choose to name loggers by functionality and
+ subcategorize by locality, as in "DATABASE.com.foo.some.package.someClass" or
+ "DATABASE.com.foo.some.other.package.someOtherClass".
+ </p>
+
+ <p><em>You are totally free in choosing the names of your
+ loggers.</em> The log4j package merely allows you to manage your
+ names in a hierarchy. However, it is your responsibility to define
+ this hierarchy.
+ </p>
+
+ <p>Note by naming loggers by locality one tends to name things by
+ functionality, since in most cases the locality relates closely to
+ functionality.
+ </p>
+ </answer></faq>
+
+ <faq id="2.5"><question>How do I get the fully-qualified name of a class in a static block?</question>
+ <answer>
+ <p>You can easily retrieve the fully-qualified name of a class in a
+ static block for class X, with the statement
+ <code>X.class.getName()</code>. Note that <code>X</code> is the class
+ name and not an instance. The <code>X.class</code> statement does
+ <i>not</i> create a new instance of class <code>X</code>.
+ </p>
+
+ <p>Here is the suggested usage template:</p>
+
+ <pre class="source">
+package a.b.c;
+
+public class Foo {
+ final static Logger logger = Logger.getLogger(Foo.class);
+ ... other code
+
+}
+ </pre>
+ </answer></faq>
+
+ <faq id="2.6"><question>Can the log output format be customized? </question>
+ <answer>
+ <p>Yes, you can extend the <code>Layout</code> class to create
+ you own customized log format. Appenders can be parameterized
+ to use the layout of your choice.
+ </p>
+</answer></faq>
+
+ <faq id="2.7"><question>What are the configurable options for <code>FooBarAppender</code>?</question>
+ <answer>
+ <p>Log4j uses JavaBeans style configuration.</p>
+
+ <p>Thus, any setter method in <code>FooBarAppender</code>
+ corresponds to a configurable option. For example, in <a href="apidocs\org\apache\log4j\RollingFileAppender.html"><code>RollingFileAppender</code></a>
+ the <a href="apidocs/org/apache/log4j/RollingFileAppender.html#setMaxBackupIndex(int)"><code>setMaxBackupIndex(int
+ maxBackups)</code></a> method corresponds to the
+ <code>maxBackupIndex</code> option. The first letter of the
+ option can be upper case, i.e. <code>MaxBackupIndex</code>
+ and <code>maxBackupIndex</code> are equivalent but not
+ <code>MAXBACKUPIndex</code> nor <code>mAXBackupIndex</code>.
+ </p>
+
+ <p>Layouts options are also defined by their setter methods. The same goes
+ for most other log4j components.
+ </p>
+ </answer></faq>
+
+ <faq id="2.8"><question>What is the recommended way of migrating from
+ java.util.logging to log4j?</question>
+ <answer>
+
+ <p>We suggest to just use global file search/replace. You should be able
+ to replace all the "java.util.Logger" references with
+ "org.apache.log4j.Logger", and you should be on your way.
+ </p>
+
+ <p>If you're on a Win32 platform, we recommend <a href="http://www.textpad.com/">Textpad</a>. You can use the
+ CTRL+SHIFT+O to open all *.java files from a directory including all
+ its sub-directories, and then use the search/replace function to
+ replace in all files, and then CTRL+SHIFT+S to save all. Should take
+ about 60 seconds! :)
+ </p>
+ </answer></faq>
+
+ <faq id="2.9"><question>Is it possible to direct log output to
+ different appenders by level? </question><answer>
+ <p>Yes it is. Setting the <b>Threshold</b> option of any appender
+ extending <a href="api/org/apache/log4j/AppenderSkeleton.html">AppenderSkeleton</a>,
+ (most log4j appenders extend AppenderSkeleton) to filter out all log
+ events with <em>lower</em> level than the value of the threshold
+ option.
+ </p>
+
+ <p>For example, setting the threshold of an appender to DEBUG
+ also allow INFO, WARN, ERROR and FATAL messages to log along
+ with DEBUG messages. This is usually acceptable as there is
+ little use for DEBUG messages without the surrounding INFO,
+ WARN, ERROR and FATAL messages. Similarly, setting the
+ threshold of an appender to ERROR will filter out DEBUG, INFO
+ and WARN messages but not ERROR or FATAL messages.
+ </p>
+
+ <p>This policy usually best encapsulates what the user
+ actually wants to do, as opposed to her mind-projected
+ solution.
+ </p>
+ <p>See <i>examples/sort4.lcf</i> for an example threshold
+ configuration.</p>
+
+ <p>If you must filter events by exact level match, then you can
+ attach a <a href="apidocs/org/apache/log4j/varia/LevelMatchFilter.html">LevelMatchFilter</a>
+ to any appender to filter out logging events by exact level match.
+ </p>
+ </answer></faq>
+
+
+ <faq id="2.10"><question>What does the Windows NT Event Viewer complain about
+ missing descriptions for my event messages when I use the
+ <code>NTEventLogAppender</code>?</question>
+
+ <answer>
+ <p>The NT Event Viewer relies on <i>message resource</i> DLLs
+ to properly view an event message. The NTEventLogAppender.dll
+ contains these message resources, but that DLL must be copied
+ to %SYSTEMROOT%\SYSTEM32 for it to work properly.
+ </p>
+ </answer></faq>
+
+ <faq id="2.11"><question>Why can't I map my logger names to the loggers that
+ appear in the NT Event Log when I use the
+ NTEventLogAppender?</question>
+
+ <answer>
+ <p>Unfotunately, the logger names are hardcoded within the
+ message resource DLL (see previous question about
+ NTEventLogAppender), so there isn't any easy way to override
+ those dynamically... in fact, I don't think it's possible to
+ do it, as you'd have to modify the DLL resources for every
+ application. Since most native applications don't use the
+ Logger column anyway...
+ </p>
+ </answer></faq>
+
+ <faq id="2.12"><question>Are there suggested approaches for logging in JSP pages?</question>
+ <answer>
<p>
- Dependencies with this scope will not be passed on transitively, nor will they be bundled in an package such
- as a WAR, or included in the runtime classpath.
+ The suggested approach depends on your design requirements. If you or
+ your organization has no constraints on the use of Java in JSP pages,
+ simply use log4j normally in <code><% ... %></code> statements
+ as indicated in the Short Manual and the rest of the documentation.
</p>
- </answer>
+ <p>
+ However, if your design calls for a minimum amount of Java in your JSP
+ pages, consider using the
+ <a href="http://jakarta.apache.org/taglibs/doc/log-doc/intro.html">Log Taglib</a>
+ from the Jakarta Taglibs project. It provides logging JSP tags that invoke
+ log4j.
+ </p>
+ </answer>
</faq>
+ <faq id="3.1"><question>Can the outputs of multiple client request go to
+ different log files?</question>
+ <answer>
+ <p>Many developers are confronted with the problem of
+ distinguishing the log output originating from the same class
+ but different client requests. They come up with ingenious
+ mechanisms to fan out the log output to different files. In
+ most cases, this is not the right approach.
+ </p>
+
+ <p>It is simpler to use a nested diagnostic context
+ (NDC). Typically, one would <em>NDC.push()</em> client
+ specific information, such as the client's hostname, ID or any
+ other distinguishing information when starting to handle the
+ client's request. Thereafter, log output will automatically
+ include the nested diagnostic context so that you can
+ distinguish logs from different client requests even if they
+ are output to the same file.
+ </p>
+
+ <p>See the <code>NDC</code> and the <code>PatternLayout</code>
+ classes for more information. The <code>NumberCruncher</code>
+ example shows how the NDC can be used to distinguish the log
+ output from multiple clients even if they share the same log
+ file.
+ </p>
+
+ <p>For select applications, such as virtual hosting
+ web-servers, the NDC solution is not sufficient. As of version
+ 0.9.0, log4j supports multiple hierarchy trees. Thus, it is
+ possible to log to different targets from the same logger
+ depending on the current context.
+ </p>
+ </answer></faq>
+
+
+ <faq id="3.2"><question>Logger instances seem to be create only. Why isn't
+ there a method to remove logger instances?</question>
+ <answer>
+ <p>It is quite nontrivial to define the semantics of a
+ "removed" logger escecially if it is still referenced by the
+ user. Future releases <em>may</em> include a remove method in
+ the Logger class.</p></answer></faq>
+
+ <faq id="3.3"><question>How do I get multiple process to log to the same file?</question>
+ <answer>
+ <p>You may have each process log to a
+ <a href="apidocs/org/apache/log4j/net/SocketAppender.html"><code>SocketAppender</code></a>.
+ The receiving
+ <a href="apidocs/org/apache/log4j/net/SocketServer.html"><code>SocketServer</code></a>
+ (or
+ <a href="apidocs/org/apache/log4j/net/SimpleSocketServer.html"><code>SimpleSocketServer</code></a>)
+ can receive all the events and send them to a single
+ log file.
+ </p>
+ </answer></faq>
+
+ <faq id="3.4"><question>How about the timesamps of events generated by multiple
+ processes across multiple hosts (possibly across multiple
+ timezones)?</question>
+ <answer>
+ <p>The timestamp is created when the logging event is created.
+ That is so say, when the <code>debug</code>,
+ <code>info</code>, <code>warn</code>, <code>error</code> or
+ <code>fatal</code> method is invoked. Thus, the timestamp is
+ unaffected by the time at which event arrive at a remote
+ socket server.
+ </p>
+
+ <p>Timestamps are stored in UTC format inside the
+ event. Consequently, when displayed or written to a log file,
+ timestamps appear in the same timezone as the host displaying
+ or creating the logfile. Note that because the clocks of
+ various machines may not be synchronized, there may be
+ timestamp inconsistencies between events generated on
+ different hosts.
+ </p>
+ </answer></faq>
+
+ <faq id="3.5"><question>Why can't log4j find my properties file in a J2EE or WAR
+ application?</question><answer>
+ <p>The short answer: the log4j classes and the properties file
+ are not within the scope of the same classloader.
+ </p>
+
+ <p>The long answer (and what to do about it): J2EE or Servlet
+ containers utilize Java's class loading system. Sun changed
+ the way classloading works with the release of Java 2. In
+ Java 2, classloaders are arranged in a hierarchial
+ parent-child relationship. When a child classloader needs to
+ find a class or a resource, it first delegates the request to
+ the parent.
+ </p>
+
+ <p>Log4j only uses the default <code>Class.forName()</code>
+ mechanism for loading classes. Resources are handled
+ similarly. See the documentation for
+ <code>java.lang.ClassLoader</code> for more details.
+ </p>
+
+ <p>So, if you're having problems, try loading the class or
+ resource yourself. If you can't find it, neither will
+ log4j. ;)
+ </p></answer></faq>
+
+
+ <faq id="3.6"><question>Is there a way to get log4j to automatically reload a
+ configuration file if it changes?</question><answer>
+
+ <p>Yes. Both the DOMConfigurator and the PropertyConfigurator support
+ automatic reloading through the <code>configureAndWatch</code> method.
+ See the API documentation for more details.
+ </p>
+
+
+ <p>Because the <code>configureAndWatch</code> launches a
+ separate wathdog thread, and because there is no way to stop
+ this thread in log4j 1.2, the <code>configureAndWatch</code>
+ method is unsafe for use in J2EE envrironments where
+ applications are recycled.
+ </p></answer></faq>
+
+
+ <faq id="4.1"><question>Why should I donate my extensions to log4j back to the
+ project?</question><answer>
+ <p>Contrary to the GNU Public License (GPL) the Apache
+ Software License does not make any claims over your
+ extensions. By extensions, we mean totally new code that
+ invokes existing log4j classes. <em>You are free to do
+ whatever you wish with your proprietary log4j extensions.</em>
+ In particular, you may choose to never release your extensions
+ to the wider public.
+ </p>
+
+ <p>We are very careful not to change the log4j client API so
+ that newer log4j releases are backward compatible with
+ previous versions. We are a lot less scrupulous with the
+ internal log4j API. Thus, if your extension is designed to
+ work with log4j version <code>n</code>, then when log4j
+ release version <code>n+1</code> comes out, you will probably
+ need to adapt your proprietary extensions to the new release.
+ </p>
+
+ <p>Thus, you will be forced to spend precious resources in
+ order to keep up with log4j changes. This is commonly referred
+ to as the "stupid-tax." By donating the code and making it
+ part of the standard distribution, you save yourself the
+ unnecessary maintenance work.
+ </p>
+
+ <p>If your extensions are useful then someone will eventually
+ write an extension providing the same or very similar
+ functionality. Your development effort will be wasted. Unless
+ the proprietary log4j extension is business critical, there is
+ little reason for not donating your extensions back to the
+ project.
+ </p></answer></faq>
+
+ <faq id="4.2"><question>What should I keep in mind when contributing code?</question>
+ <answer>
+ <ol>
+
+ <li>
+ <p>Write a test case for your contribution.</p>
+
+ <p>There is nothing more irritating than finding the bugs
+ in debugging (i.e. logging) code. Writing a test case
+ takes some effort but is crucial for a widely used library
+ such as log4j. Writing a test case will go a long way in
+ earning you the respect of fellow developers. See the
+ tests/ directory for exiting test cases.
+ </p>
+ </li>
+
+
+ <li>
+ <p>Stick to the existing indentation style even if you hate it.</p>
+
+ <p>Alternating between indentation styles makes it hard to
+ understand the source code. Make it a little harder on
+ yourself but easier on others.
+ </p>
+
+ <p>Log4j has adopted a rather conservative approach by
+ following the <a href="http://java.sun.com/docs/codeconv/">Code Conventions
+ for the JavaTM Programming Language</a>. <b>We use 2 (two)
+ spaces for indentation and no tabs.</b>
+ </p>
+ </li>
+
+ <li>
+ <p>Please do not both modify the code and change the
+ indentation in a single commit.</p>
+
+ <p>If you change the code and reformat it at the same time
+ and then commit, the commit notification message will be
+ hard to read. It will contain many diffs associated with
+ the reformatting in addition to logical changes.
+ </p>
+
+ <p>If you must reformat and change the code, then perform
+ each step separately. For example, reformat the code and
+ commit. Following that, you can change the logic and
+ commit. The two steps can be performed in the reverse
+ order just as well. You can first change the logic and
+ commit and only later reformat and commit.
+ </p>
+
+ </li>
+ <li>
+ <p>Make every effort to stick to the JDK 1.1 API.</p>
+
+ <p>One of the important advantages of log4j is its
+ compatibility with JDK 1.1.x.
+ </p>
+ </li>
+
+ <li>
+ <p>Always keep it simple, small and fast when
+ possible.</p>
+
+ <p>It's all about the application not about logging.</p>
+ </li>
+
+ <li>
+ <p>Identify yourself as a contributor at the top of the
+ relevant file.
+ </p>
+ </li>
+ <li>
+ <p>Take responsibility for your code.</p>
+
+ <p>Authoring software is very much like running a marathon. It
+ takes time and endurance.
+ </p>
+ </li>
+ <li>
+ <p>Did we mention sticking with the indentation style? </p>
+ </li>
+ <li><p>Did we mention writing test cases? </p>
+ </li>
+
+ </ol>
+ </answer></faq>
+
+
+ <faq id="duplicate-messages">
+ <question>Why am I getting multiple copies of messages in my log file?</question>
+ <answer>
+ <p>There are several reasons this can occur:
+ <ul>
+ <li>Repeated configuration of log4j: By default, each call to
+ PropertyConfigurator.configure or DOMConfigurator.configure is
+ culmulative. If your configuration file defines a file appender,
+ calling PropertyConfigurator.configure three times will create
+ three distinct instances and connect each of them to the specified logger.</li>
+ <li>Attaching the same appender to multiple loggers: if an appender is
+ attached to the root logger and child logger, then any message
+ sent to the child logger will go to the appender twice (unless
+ additivity is set to false).</li>
+ </ul></p>
+ </answer>
+ </faq>
+ <faq id="custom-level">
+ <question>How do I add a custom level?</question>
+ <answer>
+ <p>It is possible, but rarely appropriate. The
+ request is commonly for a level named something like "audit"
+ that doesn't obviously fit in the progression "trace", "debug",
+ "info", "warn", "error" and "fatal". In that case, the request
+ for a level is really a request for a mechanism to specify
+ a different audience. The appropriate mechanism is to use a distinct
+ logger name (or tree) for "audit" related messages.</p>
+ </answer>
+ </faq>
</part>
</faqs>
Modified: logging/log4j/branches/v1_2-branch/src/site/site.xml
URL: http://svn.apache.org/viewvc/logging/log4j/branches/v1_2-branch/src/site/site.xml?view=diff&rev=537211&r1=537210&r2=537211
==============================================================================
--- logging/log4j/branches/v1_2-branch/src/site/site.xml (original)
+++ logging/log4j/branches/v1_2-branch/src/site/site.xml Fri May 11 08:36:55 2007
@@ -19,7 +19,7 @@
<bannerLeft>
<name>Apache log4j 1.2</name>
<src>images/ls-logo.jpg</src>
- <href>http://logging.apache.org/log4j/1.2</href>
+ <href>http://logging.apache.org/test/log4j/1.2</href>
</bannerLeft>
<bannerRight>
<src>images/logo.jpg</src>
@@ -27,9 +27,9 @@
<body>
<breadcrumbs>
<item name="Apache" href="http://www.apache.org/"/>
- <item name="Logging Services" href="http://logging.apache.org/"/>
- <item name="log4j" href="http://logging.apache.org/log4j/"/>
- <item name="1.2" href="http://logging.apache.org/log4j/1.2/"/>
+ <item name="Logging Services" href="http://logging.apache.org/test/"/>
+ <item name="log4j" href="http://logging.apache.org/test/log4j/"/>
+ <item name="1.2" href="http://logging.apache.org/test/log4j/1.2/"/>
</breadcrumbs>
<menu name="Get log4j 1.2">
@@ -59,13 +59,13 @@
<menu name="Documentation">
<item name="Introduction" href="/manual.html"/>
<item name="JavaDoc" href="/apidocs/index.html"/>
- <item name="Books" href="/books.html"/>
+ <item name="Publications" href="/publications.html"/>
</menu>
<menu name="Resources">
- <item name="Sandbox" href="http://logging.apache.org/sandbox"/>
- <item name="Catalog" href="http://logging.apache.org/catalog.html"/>
- <item name="Wiki" href="http://wiki.apache.org/logging/log4j"/>
+ <item name="Sandbox" href="http://logging.apache.org/test/sandbox"/>
+ <item name="Catalog" href="http://logging.apache.org/test/catalog.html"/>
+ <item name="Wiki" href="http://wiki.apache.org/logging-log4j"/>
</menu>
</body>
</project>
---------------------------------------------------------------------
To unsubscribe, e-mail: log4j-dev-unsubscribe@logging.apache.org
For additional commands, e-mail: log4j-dev-help@logging.apache.org