You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@kafka.apache.org by jk...@apache.org on 2011/08/02 01:42:17 UTC
svn commit: r1152970 [5/26] - in /incubator/kafka: branches/ site/ trunk/
trunk/bin/ trunk/clients/ trunk/clients/clojure/
trunk/clients/clojure/leiningen/ trunk/clients/clojure/resources/
trunk/clients/clojure/src/ trunk/clients/clojure/src/kafka/ tru...
Added: incubator/kafka/trunk/clients/cpp/build-aux/ltmain.sh
URL: http://svn.apache.org/viewvc/incubator/kafka/trunk/clients/cpp/build-aux/ltmain.sh?rev=1152970&view=auto
==============================================================================
--- incubator/kafka/trunk/clients/cpp/build-aux/ltmain.sh (added)
+++ incubator/kafka/trunk/clients/cpp/build-aux/ltmain.sh Mon Aug 1 23:41:24 2011
@@ -0,0 +1,8413 @@
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6b
+# Written by Gordon Matzigkeit <go...@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print informational messages (default)
+# --version print version information
+# -h, --help print short or long help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu3
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bu...@gnu.org>.
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION="2.2.6b Debian-2.2.6b-2ubuntu3"
+TIMESTAMP=""
+package_revision=1.3017
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+
+$lt_unset CDPATH
+
+
+
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+ -*) progname=./$progname ;;
+esac
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=:
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname${mode+: }$mode: $*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "X$my_tmpdir" | $Xsed
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "X$1" | $Xsed \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $SED -n '/^# Usage:/,/# -h/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ $ECHO
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ func_error "missing argument for $1"
+ exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell, and then maybe $ECHO will work.
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit $EXIT_SUCCESS
+fi
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+# $mode is unset
+nonopt=
+execute_dlfiles=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ $ECHO "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ $ECHO "enable shared libraries"
+ else
+ $ECHO "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ $ECHO "enable static libraries"
+ else
+ $ECHO "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# Parse options once, thoroughly. This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
+
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+
+ # Parse non-mode specific arguments:
+ while test "$#" -gt 0; do
+ opt="$1"
+ shift
+
+ case $opt in
+ --config) func_config ;;
+
+ --debug) preserve_args="$preserve_args $opt"
+ func_echo "enabling shell trace mode"
+ opt_debug='set -x'
+ $opt_debug
+ ;;
+
+ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ execute_dlfiles="$execute_dlfiles $1"
+ shift
+ ;;
+
+ --dry-run | -n) opt_dry_run=: ;;
+ --features) func_features ;;
+ --finish) mode="finish" ;;
+
+ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ case $1 in
+ # Valid mode arguments:
+ clean) ;;
+ compile) ;;
+ execute) ;;
+ finish) ;;
+ install) ;;
+ link) ;;
+ relink) ;;
+ uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+
+ mode="$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_duplicate_deps=: ;;
+
+ --quiet|--silent) preserve_args="$preserve_args $opt"
+ opt_silent=:
+ ;;
+
+ --verbose| -v) preserve_args="$preserve_args $opt"
+ opt_silent=false
+ ;;
+
+ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ preserve_args="$preserve_args $opt $1"
+ func_enable_tag "$1" # tagname is set here
+ shift
+ ;;
+
+ # Separate optargs to long options:
+ -dlopen=*|--mode=*|--tag=*)
+ func_opt_split "$opt"
+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) opt_help=: ;;
+ --version) func_version ;;
+
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+
+ *) nonopt="$opt"
+ break
+ ;;
+ esac
+ done
+
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+ ;;
+ esac
+
+ # Having warned about all mis-specified options, bail out if
+ # anything was wrong.
+ $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+$opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$mode' for more information."
+}
+
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_ltwrapper_scriptname_result=""
+ if func_ltwrapper_executable_p "$1"; then
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case "$@ " in
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ pie_flag="$pie_flag $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ later="$later $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$arg"
+ lastarg="$lastarg $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ base_compile="$base_compile $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_quote_for_eval "$lastarg"
+ base_compile="$base_compile $func_quote_for_eval_result"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ removelist="$removelist $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ removelist="$removelist $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ command="$command -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$mode'"
+ ;;
+ esac
+
+ $ECHO
+ $ECHO "Try \`$progname --help' for more information about other modes."
+
+ exit $?
+}
+
+ # Now that we've collected a possible --mode arg, show help if necessary
+ $opt_help && func_mode_help
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_quote_for_eval "$file"
+ args="$args $func_quote_for_eval_result"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ $ECHO "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libdirs="$nonopt"
+ admincmds=
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ $ECHO "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ $ECHO
+ $ECHO "If you ever happen to want to link against installed libraries"
+ $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ $ECHO "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ $ECHO " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
+ $ECHO " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ $ECHO
+
+ $ECHO "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ $ECHO "pages."
+ ;;
+ *)
+ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ exit $EXIT_SUCCESS
+}
+
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ install_prog="$install_prog$func_quote_for_eval_result"
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ for arg
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ install_prog="$install_prog $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_verbose "extracting global C symbols from \`$progfile'"
+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs. */"
+ lt_dlsym_const= ;;
+ *osf5*)
+ echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+ lt_dlsym_const= ;;
+ *)
+ lt_dlsym_const=const ;;
+ esac
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) symtab_cflags="$symtab_cflags $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+ func_emit_wrapper_part1_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part1_arg1=$1
+ fi
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ ECHO=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$ECHO works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$ECHO will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $ECHO "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+ func_emit_wrapper_part2_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part2_arg1=$1
+ fi
+
+ $ECHO "\
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_arg1=$1
+ fi
+
+ # split this up so that func_emit_cwrapperexe_src
+ # can call each part independently.
+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin. Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+ func_to_host_path_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ case $build in
+ *mingw* ) # actually, msys
+ # awkward: cmd appends spaces to result
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_path_tmp1=`cygpath -w "$1"`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # Unfortunately, winepath does not exit with a non-zero
[... 5414 lines stripped ...]