You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@lucenenet.apache.org by sy...@apache.org on 2014/09/06 21:36:36 UTC
[25/51] [abbrv] [partial] Cleaning up and getting ready to
development towards v4.8
http://git-wip-us.apache.org/repos/asf/lucenenet/blob/1da1cb5b/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml
----------------------------------------------------------------------
diff --git a/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml b/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml
deleted file mode 100644
index 87f666b..0000000
--- a/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml
+++ /dev/null
@@ -1,9832 +0,0 @@
-<?xml version="1.0"?>
-<doc>
- <assembly>
- <name>nunit.framework</name>
- </assembly>
- <members>
- <member name="T:NUnit.Framework.CategoryAttribute">
- <summary>
- Attribute used to apply a category to a test
- </summary>
- </member>
- <member name="F:NUnit.Framework.CategoryAttribute.categoryName">
- <summary>
- The name of the category
- </summary>
- </member>
- <member name="M:NUnit.Framework.CategoryAttribute.#ctor(System.String)">
- <summary>
- Construct attribute for a given category based on
- a name. The name may not contain the characters ',',
- '+', '-' or '!'. However, this is not checked in the
- constructor since it would cause an error to arise at
- as the test was loaded without giving a clear indication
- of where the problem is located. The error is handled
- in NUnitFramework.cs by marking the test as not
- runnable.
- </summary>
- <param name="name">The name of the category</param>
- </member>
- <member name="M:NUnit.Framework.CategoryAttribute.#ctor">
- <summary>
- Protected constructor uses the Type name as the name
- of the category.
- </summary>
- </member>
- <member name="P:NUnit.Framework.CategoryAttribute.Name">
- <summary>
- The name of the category
- </summary>
- </member>
- <member name="T:NUnit.Framework.DatapointAttribute">
- <summary>
- Used to mark a field for use as a datapoint when executing a theory
- within the same fixture that requires an argument of the field's Type.
- </summary>
- </member>
- <member name="T:NUnit.Framework.DatapointsAttribute">
- <summary>
- Used to mark an array as containing a set of datapoints to be used
- executing a theory within the same fixture that requires an argument
- of the Type of the array elements.
- </summary>
- </member>
- <member name="T:NUnit.Framework.DescriptionAttribute">
- <summary>
- Attribute used to provide descriptive text about a
- test case or fixture.
- </summary>
- </member>
- <member name="M:NUnit.Framework.DescriptionAttribute.#ctor(System.String)">
- <summary>
- Construct the attribute
- </summary>
- <param name="description">Text describing the test</param>
- </member>
- <member name="P:NUnit.Framework.DescriptionAttribute.Description">
- <summary>
- Gets the test description
- </summary>
- </member>
- <member name="T:NUnit.Framework.MessageMatch">
- <summary>
- Enumeration indicating how the expected message parameter is to be used
- </summary>
- </member>
- <member name="F:NUnit.Framework.MessageMatch.Exact">
- Expect an exact match
- </member>
- <member name="F:NUnit.Framework.MessageMatch.Contains">
- Expect a message containing the parameter string
- </member>
- <member name="F:NUnit.Framework.MessageMatch.Regex">
- Match the regular expression provided as a parameter
- </member>
- <member name="F:NUnit.Framework.MessageMatch.StartsWith">
- Expect a message that starts with the parameter string
- </member>
- <member name="T:NUnit.Framework.ExpectedExceptionAttribute">
- <summary>
- ExpectedExceptionAttribute
- </summary>
-
- </member>
- <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor">
- <summary>
- Constructor for a non-specific exception
- </summary>
- </member>
- <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.Type)">
- <summary>
- Constructor for a given type of exception
- </summary>
- <param name="exceptionType">The type of the expected exception</param>
- </member>
- <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.String)">
- <summary>
- Constructor for a given exception name
- </summary>
- <param name="exceptionName">The full name of the expected exception</param>
- </member>
- <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedException">
- <summary>
- Gets or sets the expected exception type
- </summary>
- </member>
- <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedExceptionName">
- <summary>
- Gets or sets the full Type name of the expected exception
- </summary>
- </member>
- <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedMessage">
- <summary>
- Gets or sets the expected message text
- </summary>
- </member>
- <member name="P:NUnit.Framework.ExpectedExceptionAttribute.UserMessage">
- <summary>
- Gets or sets the user message displayed in case of failure
- </summary>
- </member>
- <member name="P:NUnit.Framework.ExpectedExceptionAttribute.MatchType">
- <summary>
- Gets or sets the type of match to be performed on the expected message
- </summary>
- </member>
- <member name="P:NUnit.Framework.ExpectedExceptionAttribute.Handler">
- <summary>
- Gets the name of a method to be used as an exception handler
- </summary>
- </member>
- <member name="T:NUnit.Framework.ExplicitAttribute">
- <summary>
- ExplicitAttribute marks a test or test fixture so that it will
- only be run if explicitly executed from the gui or command line
- or if it is included by use of a filter. The test will not be
- run simply because an enclosing suite is run.
- </summary>
- </member>
- <member name="M:NUnit.Framework.ExplicitAttribute.#ctor">
- <summary>
- Default constructor
- </summary>
- </member>
- <member name="M:NUnit.Framework.ExplicitAttribute.#ctor(System.String)">
- <summary>
- Constructor with a reason
- </summary>
- <param name="reason">The reason test is marked explicit</param>
- </member>
- <member name="P:NUnit.Framework.ExplicitAttribute.Reason">
- <summary>
- The reason test is marked explicit
- </summary>
- </member>
- <member name="T:NUnit.Framework.IgnoreAttribute">
- <summary>
- Attribute used to mark a test that is to be ignored.
- Ignored tests result in a warning message when the
- tests are run.
- </summary>
- </member>
- <member name="M:NUnit.Framework.IgnoreAttribute.#ctor">
- <summary>
- Constructs the attribute without giving a reason
- for ignoring the test.
- </summary>
- </member>
- <member name="M:NUnit.Framework.IgnoreAttribute.#ctor(System.String)">
- <summary>
- Constructs the attribute giving a reason for ignoring the test
- </summary>
- <param name="reason">The reason for ignoring the test</param>
- </member>
- <member name="P:NUnit.Framework.IgnoreAttribute.Reason">
- <summary>
- The reason for ignoring a test
- </summary>
- </member>
- <member name="T:NUnit.Framework.IncludeExcludeAttribute">
- <summary>
- Abstract base for Attributes that are used to include tests
- in the test run based on environmental settings.
- </summary>
- </member>
- <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor">
- <summary>
- Constructor with no included items specified, for use
- with named property syntax.
- </summary>
- </member>
- <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor(System.String)">
- <summary>
- Constructor taking one or more included items
- </summary>
- <param name="include">Comma-delimited list of included items</param>
- </member>
- <member name="P:NUnit.Framework.IncludeExcludeAttribute.Include">
- <summary>
- Name of the item that is needed in order for
- a test to run. Multiple itemss may be given,
- separated by a comma.
- </summary>
- </member>
- <member name="P:NUnit.Framework.IncludeExcludeAttribute.Exclude">
- <summary>
- Name of the item to be excluded. Multiple items
- may be given, separated by a comma.
- </summary>
- </member>
- <member name="P:NUnit.Framework.IncludeExcludeAttribute.Reason">
- <summary>
- The reason for including or excluding the test
- </summary>
- </member>
- <member name="T:NUnit.Framework.PlatformAttribute">
- <summary>
- PlatformAttribute is used to mark a test fixture or an
- individual method as applying to a particular platform only.
- </summary>
- </member>
- <member name="M:NUnit.Framework.PlatformAttribute.#ctor">
- <summary>
- Constructor with no platforms specified, for use
- with named property syntax.
- </summary>
- </member>
- <member name="M:NUnit.Framework.PlatformAttribute.#ctor(System.String)">
- <summary>
- Constructor taking one or more platforms
- </summary>
- <param name="platforms">Comma-deliminted list of platforms</param>
- </member>
- <member name="T:NUnit.Framework.CultureAttribute">
- <summary>
- CultureAttribute is used to mark a test fixture or an
- individual method as applying to a particular Culture only.
- </summary>
- </member>
- <member name="M:NUnit.Framework.CultureAttribute.#ctor">
- <summary>
- Constructor with no cultures specified, for use
- with named property syntax.
- </summary>
- </member>
- <member name="M:NUnit.Framework.CultureAttribute.#ctor(System.String)">
- <summary>
- Constructor taking one or more cultures
- </summary>
- <param name="cultures">Comma-deliminted list of cultures</param>
- </member>
- <member name="T:NUnit.Framework.CombinatorialAttribute">
- <summary>
- Marks a test to use a combinatorial join of any argument data
- provided. NUnit will create a test case for every combination of
- the arguments provided. This can result in a large number of test
- cases and so should be used judiciously. This is the default join
- type, so the attribute need not be used except as documentation.
- </summary>
- </member>
- <member name="T:NUnit.Framework.PropertyAttribute">
- <summary>
- PropertyAttribute is used to attach information to a test as a name/value pair..
- </summary>
- </member>
- <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.String)">
- <summary>
- Construct a PropertyAttribute with a name and string value
- </summary>
- <param name="propertyName">The name of the property</param>
- <param name="propertyValue">The property value</param>
- </member>
- <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Int32)">
- <summary>
- Construct a PropertyAttribute with a name and int value
- </summary>
- <param name="propertyName">The name of the property</param>
- <param name="propertyValue">The property value</param>
- </member>
- <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Double)">
- <summary>
- Construct a PropertyAttribute with a name and double value
- </summary>
- <param name="propertyName">The name of the property</param>
- <param name="propertyValue">The property value</param>
- </member>
- <member name="M:NUnit.Framework.PropertyAttribute.#ctor">
- <summary>
- Constructor for derived classes that set the
- property dictionary directly.
- </summary>
- </member>
- <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.Object)">
- <summary>
- Constructor for use by derived classes that use the
- name of the type as the property name. Derived classes
- must ensure that the Type of the property value is
- a standard type supported by the BCL. Any custom
- types will cause a serialization Exception when
- in the client.
- </summary>
- </member>
- <member name="P:NUnit.Framework.PropertyAttribute.Properties">
- <summary>
- Gets the property dictionary for this attribute
- </summary>
- </member>
- <member name="M:NUnit.Framework.CombinatorialAttribute.#ctor">
- <summary>
- Default constructor
- </summary>
- </member>
- <member name="T:NUnit.Framework.PairwiseAttribute">
- <summary>
- Marks a test to use pairwise join of any argument data provided.
- NUnit will attempt too excercise every pair of argument values at
- least once, using as small a number of test cases as it can. With
- only two arguments, this is the same as a combinatorial join.
- </summary>
- </member>
- <member name="M:NUnit.Framework.PairwiseAttribute.#ctor">
- <summary>
- Default constructor
- </summary>
- </member>
- <member name="T:NUnit.Framework.SequentialAttribute">
- <summary>
- Marks a test to use a sequential join of any argument data
- provided. NUnit will use arguements for each parameter in
- sequence, generating test cases up to the largest number
- of argument values provided and using null for any arguments
- for which it runs out of values. Normally, this should be
- used with the same number of arguments for each parameter.
- </summary>
- </member>
- <member name="M:NUnit.Framework.SequentialAttribute.#ctor">
- <summary>
- Default constructor
- </summary>
- </member>
- <member name="T:NUnit.Framework.MaxTimeAttribute">
- <summary>
- Summary description for MaxTimeAttribute.
- </summary>
- </member>
- <member name="M:NUnit.Framework.MaxTimeAttribute.#ctor(System.Int32)">
- <summary>
- Construct a MaxTimeAttribute, given a time in milliseconds.
- </summary>
- <param name="milliseconds">The maximum elapsed time in milliseconds</param>
- </member>
- <member name="T:NUnit.Framework.RandomAttribute">
- <summary>
- RandomAttribute is used to supply a set of random values
- to a single parameter of a parameterized test.
- </summary>
- </member>
- <member name="T:NUnit.Framework.ValuesAttribute">
- <summary>
- ValuesAttribute is used to provide literal arguments for
- an individual parameter of a test.
- </summary>
- </member>
- <member name="T:NUnit.Framework.ParameterDataAttribute">
- <summary>
- Abstract base class for attributes that apply to parameters
- and supply data for the parameter.
- </summary>
- </member>
- <member name="M:NUnit.Framework.ParameterDataAttribute.GetData(System.Reflection.ParameterInfo)">
- <summary>
- Gets the data to be provided to the specified parameter
- </summary>
- </member>
- <member name="F:NUnit.Framework.ValuesAttribute.data">
- <summary>
- The collection of data to be returned. Must
- be set by any derived attribute classes.
- We use an object[] so that the individual
- elements may have their type changed in GetData
- if necessary.
- </summary>
- </member>
- <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object)">
- <summary>
- Construct with one argument
- </summary>
- <param name="arg1"></param>
- </member>
- <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object)">
- <summary>
- Construct with two arguments
- </summary>
- <param name="arg1"></param>
- <param name="arg2"></param>
- </member>
- <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object,System.Object)">
- <summary>
- Construct with three arguments
- </summary>
- <param name="arg1"></param>
- <param name="arg2"></param>
- <param name="arg3"></param>
- </member>
- <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object[])">
- <summary>
- Construct with an array of arguments
- </summary>
- <param name="args"></param>
- </member>
- <member name="M:NUnit.Framework.ValuesAttribute.GetData(System.Reflection.ParameterInfo)">
- <summary>
- Get the collection of values to be used as arguments
- </summary>
- </member>
- <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32)">
- <summary>
- Construct a set of doubles from 0.0 to 1.0,
- specifying only the count.
- </summary>
- <param name="count"></param>
- </member>
- <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Double,System.Double,System.Int32)">
- <summary>
- Construct a set of doubles from min to max
- </summary>
- <param name="min"></param>
- <param name="max"></param>
- <param name="count"></param>
- </member>
- <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
- <summary>
- Construct a set of ints from min to max
- </summary>
- <param name="min"></param>
- <param name="max"></param>
- <param name="count"></param>
- </member>
- <member name="M:NUnit.Framework.RandomAttribute.GetData(System.Reflection.ParameterInfo)">
- <summary>
- Get the collection of values to be used as arguments
- </summary>
- </member>
- <member name="T:NUnit.Framework.RangeAttribute">
- <summary>
- RangeAttribute is used to supply a range of values to an
- individual parameter of a parameterized test.
- </summary>
- </member>
- <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32)">
- <summary>
- Construct a range of ints using default step of 1
- </summary>
- <param name="from"></param>
- <param name="to"></param>
- </member>
- <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
- <summary>
- Construct a range of ints specifying the step size
- </summary>
- <param name="from"></param>
- <param name="to"></param>
- <param name="step"></param>
- </member>
- <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int64,System.Int64,System.Int64)">
- <summary>
- Construct a range of longs
- </summary>
- <param name="from"></param>
- <param name="to"></param>
- <param name="step"></param>
- </member>
- <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Double,System.Double,System.Double)">
- <summary>
- Construct a range of doubles
- </summary>
- <param name="from"></param>
- <param name="to"></param>
- <param name="step"></param>
- </member>
- <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Single,System.Single,System.Single)">
- <summary>
- Construct a range of floats
- </summary>
- <param name="from"></param>
- <param name="to"></param>
- <param name="step"></param>
- </member>
- <member name="T:NUnit.Framework.RepeatAttribute">
- <summary>
- RepeatAttribute may be applied to test case in order
- to run it multiple times.
- </summary>
- </member>
- <member name="M:NUnit.Framework.RepeatAttribute.#ctor(System.Int32)">
- <summary>
- Construct a RepeatAttribute
- </summary>
- <param name="count">The number of times to run the test</param>
- </member>
- <member name="T:NUnit.Framework.RequiredAddinAttribute">
- <summary>
- RequiredAddinAttribute may be used to indicate the names of any addins
- that must be present in order to run some or all of the tests in an
- assembly. If the addin is not loaded, the entire assembly is marked
- as NotRunnable.
- </summary>
- </member>
- <member name="M:NUnit.Framework.RequiredAddinAttribute.#ctor(System.String)">
- <summary>
- Initializes a new instance of the <see cref="T:RequiredAddinAttribute"/> class.
- </summary>
- <param name="requiredAddin">The required addin.</param>
- </member>
- <member name="P:NUnit.Framework.RequiredAddinAttribute.RequiredAddin">
- <summary>
- Gets the name of required addin.
- </summary>
- <value>The required addin name.</value>
- </member>
- <member name="T:NUnit.Framework.SetCultureAttribute">
- <summary>
- Summary description for SetCultureAttribute.
- </summary>
- </member>
- <member name="M:NUnit.Framework.SetCultureAttribute.#ctor(System.String)">
- <summary>
- Construct given the name of a culture
- </summary>
- <param name="culture"></param>
- </member>
- <member name="T:NUnit.Framework.SetUICultureAttribute">
- <summary>
- Summary description for SetUICultureAttribute.
- </summary>
- </member>
- <member name="M:NUnit.Framework.SetUICultureAttribute.#ctor(System.String)">
- <summary>
- Construct given the name of a culture
- </summary>
- <param name="culture"></param>
- </member>
- <member name="T:NUnit.Framework.SetUpAttribute">
- <summary>
- Attribute used to mark a class that contains one-time SetUp
- and/or TearDown methods that apply to all the tests in a
- namespace or an assembly.
- </summary>
- </member>
- <member name="T:NUnit.Framework.SetUpFixtureAttribute">
- <summary>
- SetUpFixtureAttribute is used to identify a SetUpFixture
- </summary>
- </member>
- <member name="T:NUnit.Framework.SuiteAttribute">
- <summary>
- Attribute used to mark a static (shared in VB) property
- that returns a list of tests.
- </summary>
- </member>
- <member name="T:NUnit.Framework.TearDownAttribute">
- <summary>
- Attribute used to identify a method that is called
- immediately after each test is run. The method is
- guaranteed to be called, even if an exception is thrown.
- </summary>
- </member>
- <member name="T:NUnit.Framework.TestAttribute">
- <summary>
- Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/>
- class makes the method callable from the NUnit test runner. There is a property
- called Description which is optional which you can provide a more detailed test
- description. This class cannot be inherited.
- </summary>
-
- <example>
- [TestFixture]
- public class Fixture
- {
- [Test]
- public void MethodToTest()
- {}
-
- [Test(Description = "more detailed description")]
- publc void TestDescriptionMethod()
- {}
- }
- </example>
-
- </member>
- <member name="P:NUnit.Framework.TestAttribute.Description">
- <summary>
- Descriptive text for this test
- </summary>
- </member>
- <member name="T:NUnit.Framework.TestCaseAttribute">
- <summary>
- TestCaseAttribute is used to mark parameterized test cases
- and provide them with their arguments.
- </summary>
- </member>
- <member name="T:NUnit.Framework.ITestCaseData">
- <summary>
- The ITestCaseData interface is implemented by a class
- that is able to return complete testcases for use by
- a parameterized test method.
-
- NOTE: This interface is used in both the framework
- and the core, even though that results in two different
- types. However, sharing the source code guarantees that
- the various implementations will be compatible and that
- the core is able to reflect successfully over the
- framework implementations of ITestCaseData.
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.Arguments">
- <summary>
- Gets the argument list to be provided to the test
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.Result">
- <summary>
- Gets the expected result
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.ExpectedException">
- <summary>
- Gets the expected exception Type
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.ExpectedExceptionName">
- <summary>
- Gets the FullName of the expected exception
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.TestName">
- <summary>
- Gets the name to be used for the test
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.Description">
- <summary>
- Gets the description of the test
- </summary>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.Ignored">
- <summary>
- Gets a value indicating whether this <see cref="T:NUnit.Framework.ITestCaseData"/> is ignored.
- </summary>
- <value><c>true</c> if ignored; otherwise, <c>false</c>.</value>
- </member>
- <member name="P:NUnit.Framework.ITestCaseData.IgnoreReason">
- <summary>
- Gets the ignore reason.
- </summary>
- <value>The ignore reason.</value>
- </member>
- <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object[])">
- <summary>
- Construct a TestCaseAttribute with a list of arguments.
- This constructor is not CLS-Compliant
- </summary>
- <param name="arguments"></param>
- </member>
- <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object)">
- <summary>
- Construct a TestCaseAttribute with a single argument
- </summary>
- <param name="arg"></param>
- </member>
- <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object)">
- <summary>
- Construct a TestCaseAttribute with a two arguments
- </summary>
- <param name="arg1"></param>
- <param name="arg2"></param>
- </member>
- <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object,System.Object)">
- <summary>
- Construct a TestCaseAttribute with a three arguments
- </summary>
- <param name="arg1"></param>
- <param name="arg2"></param>
- <param name="arg3"></param>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.Arguments">
- <summary>
- Gets the list of arguments to a test case
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.Result">
- <summary>
- Gets or sets the expected result.
- </summary>
- <value>The result.</value>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedException">
- <summary>
- Gets or sets the expected exception.
- </summary>
- <value>The expected exception.</value>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedExceptionName">
- <summary>
- Gets or sets the name the expected exception.
- </summary>
- <value>The expected name of the exception.</value>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedMessage">
- <summary>
- Gets or sets the expected message of the expected exception
- </summary>
- <value>The expected message of the exception.</value>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.MatchType">
- <summary>
- Gets or sets the type of match to be performed on the expected message
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.Description">
- <summary>
- Gets or sets the description.
- </summary>
- <value>The description.</value>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.TestName">
- <summary>
- Gets or sets the name of the test.
- </summary>
- <value>The name of the test.</value>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.Ignore">
- <summary>
- Gets or sets the ignored status of the test
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.Ignored">
- <summary>
- Gets or sets the ignored status of the test
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestCaseAttribute.IgnoreReason">
- <summary>
- Gets the ignore reason.
- </summary>
- <value>The ignore reason.</value>
- </member>
- <member name="T:NUnit.Framework.TestCaseSourceAttribute">
- <summary>
- FactoryAttribute indicates the source to be used to
- provide test cases for a test method.
- </summary>
- </member>
- <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.String)">
- <summary>
- Construct with the name of the factory - for use with languages
- that don't support params arrays.
- </summary>
- <param name="sourceName">An array of the names of the factories that will provide data</param>
- </member>
- <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.Type,System.String)">
- <summary>
- Construct with a Type and name - for use with languages
- that don't support params arrays.
- </summary>
- <param name="sourceType">The Type that will provide data</param>
- <param name="sourceName">The name of the method, property or field that will provide data</param>
- </member>
- <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceName">
- <summary>
- The name of a the method, property or fiend to be used as a source
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceType">
- <summary>
- A Type to be used as a source
- </summary>
- </member>
- <member name="T:NUnit.Framework.TestFixtureAttribute">
- <example>
- [TestFixture]
- public class ExampleClass
- {}
- </example>
- </member>
- <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor">
- <summary>
- Default constructor
- </summary>
- </member>
- <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor(System.Object[])">
- <summary>
- Construct with a object[] representing a set of arguments.
- In .NET 2.0, the arguments may later be separated into
- type arguments and constructor arguments.
- </summary>
- <param name="arguments"></param>
- </member>
- <member name="P:NUnit.Framework.TestFixtureAttribute.Description">
- <summary>
- Descriptive text for this fixture
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestFixtureAttribute.Arguments">
- <summary>
- The arguments originally provided to the attribute
- </summary>
- </member>
- <member name="P:NUnit.Framework.TestFixtureAttribute.Ignore">
- <summary>
- Gets or sets a value indicating whether this <see cref="T:NUnit.Framework.TestFixtureAttribute"/> should be ignored.
- </summary>
- <value><c>true</c> if ignore; otherwise, <c>false</c>.</value>
- </member>
- <member name="P:NUnit.Framework.TestFixtureAttribute.IgnoreReason">
- <summary>
- Gets or sets the ignore reason. May set Ignored as a side effect.
- </summary>
- <value>The ignore reason.</value>
- </member>
- <member name="T:NUnit.Framework.TestFixtureSetUpAttribute">
- <summary>
- Attribute used to identify a method that is
- called before any tests in a fixture are run.
- </summary>
- </member>
- <member name="T:NUnit.Framework.TestFixtureTearDownAttribute">
- <summary>
- Attribute used to identify a method that is called after
- all the tests in a fixture have run. The method is
- guaranteed to be called, even if an exception is thrown.
- </summary>
- </member>
- <member name="T:NUnit.Framework.TheoryAttribute">
- <summary>
- Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/>
- class makes the method callable from the NUnit test runner. There is a property
- called Description which is optional which you can provide a more detailed test
- description. This class cannot be inherited.
- </summary>
-
- <example>
- [TestFixture]
- public class Fixture
- {
- [Test]
- public void MethodToTest()
- {}
-
- [Test(Description = "more detailed description")]
- publc void TestDescriptionMethod()
- {}
- }
- </example>
-
- </member>
- <member name="T:NUnit.Framework.TimeoutAttribute">
- <summary>
- WUsed on a method, marks the test with a timeout value in milliseconds.
- The test will be run in a separate thread and is cancelled if the timeout
- is exceeded. Used on a method or assembly, sets the default timeout
- for all contained test methods.
- </summary>
- </member>
- <member name="M:NUnit.Framework.TimeoutAttribute.#ctor(System.Int32)">
- <summary>
- Construct a TimeoutAttribute given a time in milliseconds
- </summary>
- <param name="timeout">The timeout value in milliseconds</param>
- </member>
- <member name="T:NUnit.Framework.RequiresSTAAttribute">
- <summary>
- Marks a test that must run in the STA, causing it
- to run in a separate thread if necessary.
-
- On methods, you may also use STAThreadAttribute
- to serve the same purpose.
- </summary>
- </member>
- <member name="M:NUnit.Framework.RequiresSTAAttribute.#ctor">
- <summary>
- Construct a RequiresSTAAttribute
- </summary>
- </member>
- <member name="T:NUnit.Framework.RequiresMTAAttribute">
- <summary>
- Marks a test that must run in the MTA, causing it
- to run in a separate thread if necessary.
-
- On methods, you may also use MTAThreadAttribute
- to serve the same purpose.
- </summary>
- </member>
- <member name="M:NUnit.Framework.RequiresMTAAttribute.#ctor">
- <summary>
- Construct a RequiresMTAAttribute
- </summary>
- </member>
- <member name="T:NUnit.Framework.RequiresThreadAttribute">
- <summary>
- Marks a test that must run on a separate thread.
- </summary>
- </member>
- <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor">
- <summary>
- Construct a RequiresThreadAttribute
- </summary>
- </member>
- <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor(System.Threading.ApartmentState)">
- <summary>
- Construct a RequiresThreadAttribute, specifying the apartment
- </summary>
- </member>
- <member name="T:NUnit.Framework.ValueSourceAttribute">
- <summary>
- ValueSourceAttribute indicates the source to be used to
- provide data for one parameter of a test method.
- </summary>
- </member>
- <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.String)">
- <summary>
- Construct with the name of the factory - for use with languages
- that don't support params arrays.
- </summary>
- <param name="sourceName">The name of the data source to be used</param>
- </member>
- <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.Type,System.String)">
- <summary>
- Construct with a Type and name - for use with languages
- that don't support params arrays.
- </summary>
- <param name="sourceType">The Type that will provide data</param>
- <param name="sourceName">The name of the method, property or field that will provide data</param>
- </member>
- <member name="P:NUnit.Framework.ValueSourceAttribute.SourceName">
- <summary>
- The name of a the method, property or fiend to be used as a source
- </summary>
- </member>
- <member name="P:NUnit.Framework.ValueSourceAttribute.SourceType">
- <summary>
- A Type to be used as a source
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.AttributeExistsConstraint">
- <summary>
- AttributeExistsConstraint tests for the presence of a
- specified attribute on a Type.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.Constraint">
- <summary>
- The Constraint class is the base of all built-in constraints
- within NUnit. It provides the operator overloads used to combine
- constraints.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.IResolveConstraint">
- <summary>
- The IConstraintExpression interface is implemented by all
- complete and resolvable constraints and expressions.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.IResolveConstraint.Resolve">
- <summary>
- Return the top-level constraint for this expression
- </summary>
- <returns></returns>
- </member>
- <member name="F:NUnit.Framework.Constraints.Constraint.UNSET">
- <summary>
- Static UnsetObject used to detect derived constraints
- failing to set the actual value.
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.Constraint.actual">
- <summary>
- The actual value being tested against a constraint
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.Constraint.displayName">
- <summary>
- The display name of this Constraint for use by ToString()
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.Constraint.argcnt">
- <summary>
- Argument fields used by ToString();
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.Constraint.builder">
- <summary>
- The builder holding this constraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.#ctor">
- <summary>
- Construct a constraint with no arguments
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object)">
- <summary>
- Construct a constraint with one argument
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object,System.Object)">
- <summary>
- Construct a constraint with two arguments
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.SetBuilder(NUnit.Framework.Constraints.ConstraintBuilder)">
- <summary>
- Sets the ConstraintBuilder holding this constraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.WriteMessageTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the failure message to the MessageWriter provided
- as an argument. The default implementation simply passes
- the constraint and the actual value to the writer, which
- then displays the constraint description and the value.
-
- Constraints that need to provide additional details,
- such as where the error occured can override this.
- </summary>
- <param name="writer">The MessageWriter on which to display the message</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Object)">
- <summary>
- Test whether the constraint is satisfied by a given value
- </summary>
- <param name="actual">The value to be tested</param>
- <returns>True for success, false for failure</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.Matches(NUnit.Framework.Constraints.ActualValueDelegate)">
- <summary>
- Test whether the constraint is satisfied by an
- ActualValueDelegate that returns the value to be tested.
- The default implementation simply evaluates the delegate
- but derived classes may override it to provide for delayed
- processing.
- </summary>
- <param name="del">An ActualValueDelegate</param>
- <returns>True for success, false for failure</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Boolean@)">
- <summary>
- Test whether the constraint is satisfied by a given bool reference.
- The default implementation simply dereferences the value but
- derived classes may override it to provide for delayed processing.
- </summary>
- <param name="actual">A reference to the value to be tested</param>
- <returns>True for success, false for failure</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the constraint description to a MessageWriter
- </summary>
- <param name="writer">The writer on which the description is displayed</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the actual value for a failing constraint test to a
- MessageWriter. The default implementation simply writes
- the raw value of actual, leaving it to the writer to
- perform any formatting.
- </summary>
- <param name="writer">The writer on which the actual value is displayed</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.ToString">
- <summary>
- Default override of ToString returns the constraint DisplayName
- followed by any arguments within angle brackets.
- </summary>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.GetStringRepresentation">
- <summary>
- Returns the string representation of this constraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseAnd(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
- <summary>
- This operator creates a constraint that is satisfied only if both
- argument constraints are satisfied.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseOr(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
- <summary>
- This operator creates a constraint that is satisfied if either
- of the argument constraints is satisfied.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.op_LogicalNot(NUnit.Framework.Constraints.Constraint)">
- <summary>
- This operator creates a constraint that is satisfied if the
- argument constraint is not satisfied.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32)">
- <summary>
- Returns a DelayedConstraint with the specified delay time.
- </summary>
- <param name="delayInMilliseconds">The delay in milliseconds.</param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32,System.Int32)">
- <summary>
- Returns a DelayedConstraint with the specified delay time
- and polling interval.
- </summary>
- <param name="delayInMilliseconds">The delay in milliseconds.</param>
- <param name="pollingInterval">The interval at which to test the constraint.</param>
- <returns></returns>
- </member>
- <member name="P:NUnit.Framework.Constraints.Constraint.DisplayName">
- <summary>
- The display name of this Constraint for use by ToString().
- The default value is the name of the constraint with
- trailing "Constraint" removed. Derived classes may set
- this to another name in their constructors.
- </summary>
- </member>
- <member name="P:NUnit.Framework.Constraints.Constraint.And">
- <summary>
- Returns a ConstraintExpression by appending And
- to the current constraint.
- </summary>
- </member>
- <member name="P:NUnit.Framework.Constraints.Constraint.With">
- <summary>
- Returns a ConstraintExpression by appending And
- to the current constraint.
- </summary>
- </member>
- <member name="P:NUnit.Framework.Constraints.Constraint.Or">
- <summary>
- Returns a ConstraintExpression by appending Or
- to the current constraint.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.Constraint.UnsetObject">
- <summary>
- Class used to detect any derived constraints
- that fail to set the actual value in their
- Matches override.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.#ctor(System.Type)">
- <summary>
- Constructs an AttributeExistsConstraint for a specific attribute Type
- </summary>
- <param name="type"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.Matches(System.Object)">
- <summary>
- Tests whether the object provides the expected attribute.
- </summary>
- <param name="actual">A Type, MethodInfo, or other ICustomAttributeProvider</param>
- <returns>True if the expected attribute is present, otherwise false</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Writes the description of the constraint to the specified writer
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.AttributeConstraint">
- <summary>
- AttributeConstraint tests that a specified attribute is present
- on a Type or other provider and that the value of the attribute
- satisfies some other constraint.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.PrefixConstraint">
- <summary>
- Abstract base class used for prefixes
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.PrefixConstraint.baseConstraint">
- <summary>
- The base constraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.PrefixConstraint.#ctor(NUnit.Framework.Constraints.IResolveConstraint)">
- <summary>
- Construct given a base constraint
- </summary>
- <param name="resolvable"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeConstraint.#ctor(System.Type,NUnit.Framework.Constraints.Constraint)">
- <summary>
- Constructs an AttributeConstraint for a specified attriute
- Type and base constraint.
- </summary>
- <param name="type"></param>
- <param name="baseConstraint"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeConstraint.Matches(System.Object)">
- <summary>
- Determines whether the Type or other provider has the
- expected attribute and if its value matches the
- additional constraint specified.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Writes a description of the attribute to the specified writer.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Writes the actual value supplied to the specified writer.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.AttributeConstraint.GetStringRepresentation">
- <summary>
- Returns a string representation of the constraint.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.BasicConstraint">
- <summary>
- BasicConstraint is the abstract base for constraints that
- perform a simple comparison to a constant value.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.BasicConstraint.#ctor(System.Object,System.String)">
- <summary>
- Initializes a new instance of the <see cref="T:BasicConstraint"/> class.
- </summary>
- <param name="expected">The expected.</param>
- <param name="description">The description.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.BasicConstraint.Matches(System.Object)">
- <summary>
- Test whether the constraint is satisfied by a given value
- </summary>
- <param name="actual">The value to be tested</param>
- <returns>True for success, false for failure</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.BasicConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the constraint description to a MessageWriter
- </summary>
- <param name="writer">The writer on which the description is displayed</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.NullConstraint">
- <summary>
- NullConstraint tests that the actual value is null
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.NullConstraint.#ctor">
- <summary>
- Initializes a new instance of the <see cref="T:NullConstraint"/> class.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.TrueConstraint">
- <summary>
- TrueConstraint tests that the actual value is true
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.TrueConstraint.#ctor">
- <summary>
- Initializes a new instance of the <see cref="T:TrueConstraint"/> class.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.FalseConstraint">
- <summary>
- FalseConstraint tests that the actual value is false
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.FalseConstraint.#ctor">
- <summary>
- Initializes a new instance of the <see cref="T:FalseConstraint"/> class.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.NaNConstraint">
- <summary>
- NaNConstraint tests that the actual value is a double or float NaN
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.NaNConstraint.Matches(System.Object)">
- <summary>
- Test that the actual value is an NaN
- </summary>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.NaNConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the constraint description to a specified writer
- </summary>
- <param name="writer"></param>
- </member>
- <member name="T:NUnit.Framework.Constraints.BinaryConstraint">
- <summary>
- BinaryConstraint is the abstract base of all constraints
- that combine two other constraints in some fashion.
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.BinaryConstraint.left">
- <summary>
- The first constraint being combined
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.BinaryConstraint.right">
- <summary>
- The second constraint being combined
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.BinaryConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
- <summary>
- Construct a BinaryConstraint from two other constraints
- </summary>
- <param name="left">The first constraint</param>
- <param name="right">The second constraint</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.AndConstraint">
- <summary>
- AndConstraint succeeds only if both members succeed.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.AndConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
- <summary>
- Create an AndConstraint from two other constraints
- </summary>
- <param name="left">The first constraint</param>
- <param name="right">The second constraint</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.AndConstraint.Matches(System.Object)">
- <summary>
- Apply both member constraints to an actual value, succeeding
- succeeding only if both of them succeed.
- </summary>
- <param name="actual">The actual value</param>
- <returns>True if the constraints both succeeded</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a description for this contraint to a MessageWriter
- </summary>
- <param name="writer">The MessageWriter to receive the description</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the actual value for a failing constraint test to a
- MessageWriter. The default implementation simply writes
- the raw value of actual, leaving it to the writer to
- perform any formatting.
- </summary>
- <param name="writer">The writer on which the actual value is displayed</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.OrConstraint">
- <summary>
- OrConstraint succeeds if either member succeeds
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.OrConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
- <summary>
- Create an OrConstraint from two other constraints
- </summary>
- <param name="left">The first constraint</param>
- <param name="right">The second constraint</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.OrConstraint.Matches(System.Object)">
- <summary>
- Apply the member constraints to an actual value, succeeding
- succeeding as soon as one of them succeeds.
- </summary>
- <param name="actual">The actual value</param>
- <returns>True if either constraint succeeded</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.OrConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a description for this contraint to a MessageWriter
- </summary>
- <param name="writer">The MessageWriter to receive the description</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionConstraint">
- <summary>
- CollectionConstraint is the abstract base class for
- constraints that operate on collections.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor">
- <summary>
- Construct an empty CollectionConstraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor(System.Object)">
- <summary>
- Construct a CollectionConstraint
- </summary>
- <param name="arg"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionConstraint.IsEmpty(System.Collections.IEnumerable)">
- <summary>
- Determines whether the specified enumerable is empty.
- </summary>
- <param name="enumerable">The enumerable.</param>
- <returns>
- <c>true</c> if the specified enumerable is empty; otherwise, <c>false</c>.
- </returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionConstraint.Matches(System.Object)">
- <summary>
- Test whether the constraint is satisfied by a given value
- </summary>
- <param name="actual">The value to be tested</param>
- <returns>True for success, false for failure</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Protected method to be implemented by derived classes
- </summary>
- <param name="collection"></param>
- <returns></returns>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionItemsEqualConstraint">
- <summary>
- CollectionItemsEqualConstraint is the abstract base class for all
- collection constraints that apply some notion of item equality
- as a part of their operation.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor">
- <summary>
- Construct an empty CollectionConstraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor(System.Object)">
- <summary>
- Construct a CollectionConstraint
- </summary>
- <param name="arg"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using(System.Collections.IComparer)">
- <summary>
- Flag the constraint to use the supplied IComparer object.
- </summary>
- <param name="comparer">The IComparer object to use.</param>
- <returns>Self.</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.ItemsEqual(System.Object,System.Object)">
- <summary>
- Compares two collection members for equality
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Tally(System.Collections.IEnumerable)">
- <summary>
- Return a new CollectionTally for use in making tests
- </summary>
- <param name="c">The collection to be included in the tally</param>
- </member>
- <member name="P:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.IgnoreCase">
- <summary>
- Flag the constraint to ignore case and return self.
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.EmptyCollectionConstraint">
- <summary>
- EmptyCollectionConstraint tests whether a collection is empty.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.EmptyCollectionConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Check that the collection is empty
- </summary>
- <param name="collection"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.EmptyCollectionConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the constraint description to a MessageWriter
- </summary>
- <param name="writer"></param>
- </member>
- <member name="T:NUnit.Framework.Constraints.UniqueItemsConstraint">
- <summary>
- UniqueItemsConstraint tests whether all the items in a
- collection are unique.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.UniqueItemsConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Check that all items are unique.
- </summary>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.UniqueItemsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a description of this constraint to a MessageWriter
- </summary>
- <param name="writer"></param>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionContainsConstraint">
- <summary>
- CollectionContainsConstraint is used to test whether a collection
- contains an expected object as a member.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.#ctor(System.Object)">
- <summary>
- Construct a CollectionContainsConstraint
- </summary>
- <param name="expected"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Test whether the expected item is contained in the collection
- </summary>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a descripton of the constraint to a MessageWriter
- </summary>
- <param name="writer"></param>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionEquivalentConstraint">
- <summary>
- CollectionEquivalentCOnstraint is used to determine whether two
- collections are equivalent.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.#ctor(System.Collections.IEnumerable)">
- <summary>
- Construct a CollectionEquivalentConstraint
- </summary>
- <param name="expected"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Test whether two collections are equivalent
- </summary>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a description of this constraint to a MessageWriter
- </summary>
- <param name="writer"></param>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionSubsetConstraint">
- <summary>
- CollectionSubsetConstraint is used to determine whether
- one collection is a subset of another
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.#ctor(System.Collections.IEnumerable)">
- <summary>
- Construct a CollectionSubsetConstraint
- </summary>
- <param name="expected">The collection that the actual value is expected to be a subset of</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Test whether the actual collection is a subset of
- the expected collection provided.
- </summary>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a description of this constraint to a MessageWriter
- </summary>
- <param name="writer"></param>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionOrderedConstraint">
- <summary>
- CollectionOrderedConstraint is used to test whether a collection is ordered.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.#ctor">
- <summary>
- Construct a CollectionOrderedConstraint
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using(System.Collections.IComparer)">
- <summary>
- Modifies the constraint to use an IComparer and returns self.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.By(System.String)">
- <summary>
- Modifies the constraint to test ordering by the value of
- a specified property and returns self.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.doMatch(System.Collections.IEnumerable)">
- <summary>
- Test whether the collection is ordered
- </summary>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write a description of the constraint to a MessageWriter
- </summary>
- <param name="writer"></param>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.GetStringRepresentation">
- <summary>
- Returns the string representation of the constraint.
- </summary>
- <returns></returns>
- </member>
- <member name="P:NUnit.Framework.Constraints.CollectionOrderedConstraint.Descending">
- <summary>
- If used performs a reverse comparison
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.CollectionTally">
- <summary>
- CollectionTally counts (tallies) the number of
- occurences of each object in one or more enumerations.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionTally.#ctor(NUnit.Framework.Constraints.NUnitEqualityComparer,System.Collections.IEnumerable)">
- <summary>
- Construct a CollectionTally object from a comparer and a collection
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionTally.TryRemove(System.Object)">
- <summary>
- Try to remove an object from the tally
- </summary>
- <param name="o">The object to remove</param>
- <returns>True if successful, false if the object was not found</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.CollectionTally.TryRemove(System.Collections.IEnumerable)">
- <summary>
- Try to remove a set of objects from the tally
- </summary>
- <param name="c">The objects to remove</param>
- <returns>True if successful, false if any object was not found</returns>
- </member>
- <member name="P:NUnit.Framework.Constraints.CollectionTally.Count">
- <summary>
- The number of objects remaining in the tally
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.ComparisonAdapter">
- <summary>
- ComparisonAdapter class centralizes all comparisons of
- values in NUnit, adapting to the use of any provided
- IComparer, IComparer<T> or Comparison<T>
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For(System.Collections.IComparer)">
- <summary>
- Returns a ComparisonAdapter that wraps an IComparer
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.Compare(System.Object,System.Object)">
- <summary>
- Compares two objects
- </summary>
- </member>
- <member name="P:NUnit.Framework.Constraints.ComparisonAdapter.Default">
- <summary>
- Gets the default ComparisonAdapter, which wraps an
- NUnitComparer object.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter.#ctor(System.Collections.IComparer)">
- <summary>
- Construct a ComparisonAdapter for an IComparer
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter.Compare(System.Object,System.Object)">
- <summary>
- Compares two objects
- </summary>
- <param name="expected"></param>
- <param name="actual"></param>
- <returns></returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.DefaultComparisonAdapter.#ctor">
- <summary>
- Construct a default ComparisonAdapter
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.ComparisonConstraint">
- <summary>
- Abstract base class for constraints that compare values to
- determine if one is greater than, equal to or less than
- the other.
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.expected">
- <summary>
- The value against which a comparison is to be made
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.ltOK">
- <summary>
- If true, less than returns success
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.eqOK">
- <summary>
- if true, equal returns success
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.gtOK">
- <summary>
- if true, greater than returns success
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.predicate">
- <summary>
- The predicate used as a part of the description
- </summary>
- </member>
- <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.comparer">
- <summary>
- ComparisonAdapter to be used in making the comparison
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.#ctor(System.Object,System.Boolean,System.Boolean,System.Boolean,System.String)">
- <summary>
- Initializes a new instance of the <see cref="T:ComparisonConstraint"/> class.
- </summary>
- <param name="value">The value against which to make a comparison.</param>
- <param name="ltOK">if set to <c>true</c> less succeeds.</param>
- <param name="eqOK">if set to <c>true</c> equal succeeds.</param>
- <param name="gtOK">if set to <c>true</c> greater succeeds.</param>
- <param name="predicate">String used in describing the constraint.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Matches(System.Object)">
- <summary>
- Test whether the constraint is satisfied by a given value
- </summary>
- <param name="actual">The value to be tested</param>
- <returns>True for success, false for failure</returns>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
- <summary>
- Write the constraint description to a MessageWriter
- </summary>
- <param name="writer">The writer on which the description is displayed</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using(System.Collections.IComparer)">
- <summary>
- Modifies the constraint to use an IComparer and returns self
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.GreaterThanConstraint">
- <summary>
- Tests whether a value is greater than the value supplied to its constructor
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.GreaterThanConstraint.#ctor(System.Object)">
- <summary>
- Initializes a new instance of the <see cref="T:GreaterThanConstraint"/> class.
- </summary>
- <param name="expected">The expected value.</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.GreaterThanOrEqualConstraint">
- <summary>
- Tests whether a value is greater than or equal to the value supplied to its constructor
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.GreaterThanOrEqualConstraint.#ctor(System.Object)">
- <summary>
- Initializes a new instance of the <see cref="T:GreaterThanOrEqualConstraint"/> class.
- </summary>
- <param name="expected">The expected value.</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.LessThanConstraint">
- <summary>
- Tests whether a value is less than the value supplied to its constructor
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.LessThanConstraint.#ctor(System.Object)">
- <summary>
- Initializes a new instance of the <see cref="T:LessThanConstraint"/> class.
- </summary>
- <param name="expected">The expected value.</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.LessThanOrEqualConstraint">
- <summary>
- Tests whether a value is less than or equal to the value supplied to its constructor
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.LessThanOrEqualConstraint.#ctor(System.Object)">
- <summary>
- Initializes a new instance of the <see cref="T:LessThanOrEqualConstraint"/> class.
- </summary>
- <param name="expected">The expected value.</param>
- </member>
- <member name="T:NUnit.Framework.Constraints.ActualValueDelegate">
- <summary>
- Delegate used to delay evaluation of the actual value
- to be used in evaluating a constraint
- </summary>
- </member>
- <member name="T:NUnit.Framework.Constraints.ConstraintBuilder">
- <summary>
- ConstraintBuilder maintains the stacks that are used in
- processing a ConstraintExpression. An OperatorStack
- is used to hold operators that are waiting for their
- operands to be reognized. a ConstraintStack holds
- input constraints as well as the results of each
- operator applied.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.#ctor">
- <summary>
- Initializes a new instance of the <see cref="T:ConstraintBuilder"/> class.
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.Append(NUnit.Framework.Constraints.ConstraintOperator)">
- <summary>
- Appends the specified operator to the expression by first
- reducing the operator stack and then pushing the new
- operator on the stack.
- </summary>
- <param name="op">The operator to push.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.Append(NUnit.Framework.Constraints.Constraint)">
- <summary>
- Appends the specified constraint to the expresson by pushing
- it on the constraint stack.
- </summary>
- <param name="constraint">The constraint to push.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.SetTopOperatorRightContext(System.Object)">
- <summary>
- Sets the top operator right context.
- </summary>
- <param name="rightContext">The right context.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.ReduceOperatorStack(System.Int32)">
- <summary>
- Reduces the operator stack until the topmost item
- precedence is greater than or equal to the target precedence.
- </summary>
- <param name="targetPrecedence">The target precedence.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.Resolve">
- <summary>
- Resolves this instance, returning a Constraint. If the builder
- is not currently in a resolvable state, an exception is thrown.
- </summary>
- <returns>The resolved constraint</returns>
- </member>
- <member name="P:NUnit.Framework.Constraints.ConstraintBuilder.IsResolvable">
- <summary>
- Gets a value indicating whether this instance is resolvable.
- </summary>
- <value>
- <c>true</c> if this instance is resolvable; otherwise, <c>false</c>.
- </value>
- </member>
- <member name="T:NUnit.Framework.Constraints.ConstraintBuilder.OperatorStack">
- <summary>
- OperatorStack is a type-safe stack for holding ConstraintOperators
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.OperatorStack.#ctor(NUnit.Framework.Constraints.ConstraintBuilder)">
- <summary>
- Initializes a new instance of the <see cref="T:OperatorStack"/> class.
- </summary>
- <param name="builder">The builder.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.OperatorStack.Push(NUnit.Framework.Constraints.ConstraintOperator)">
- <summary>
- Pushes the specified operator onto the stack.
- </summary>
- <param name="op">The op.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.OperatorStack.Pop">
- <summary>
- Pops the topmost operator from the stack.
- </summary>
- <returns></returns>
- </member>
- <member name="P:NUnit.Framework.Constraints.ConstraintBuilder.OperatorStack.Empty">
- <summary>
- Gets a value indicating whether this <see cref="T:OpStack"/> is empty.
- </summary>
- <value><c>true</c> if empty; otherwise, <c>false</c>.</value>
- </member>
- <member name="P:NUnit.Framework.Constraints.ConstraintBuilder.OperatorStack.Top">
- <summary>
- Gets the topmost operator without modifying the stack.
- </summary>
- <value>The top.</value>
- </member>
- <member name="T:NUnit.Framework.Constraints.ConstraintBuilder.ConstraintStack">
- <summary>
- ConstraintStack is a type-safe stack for holding Constraints
- </summary>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.ConstraintStack.#ctor(NUnit.Framework.Constraints.ConstraintBuilder)">
- <summary>
- Initializes a new instance of the <see cref="T:ConstraintStack"/> class.
- </summary>
- <param name="builder">The builder.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.ConstraintStack.Push(NUnit.Framework.Constraints.Constraint)">
- <summary>
- Pushes the specified constraint. As a side effect,
- the constraint's builder field is set to the
- ConstraintBuilder owning this stack.
- </summary>
- <param name="constraint">The constraint.</param>
- </member>
- <member name="M:NUnit.Framework.Constraints.ConstraintBuilder.ConstraintStack.Pop">
- <summary>
- Pops this topmost constrait from the stack.
- As a side effect, the constraint's builder
- field is set to null.
- </summary>
- <returns>
<TRUNCATED>
http://git-wip-us.apache.org/repos/asf/lucenenet/blob/1da1cb5b/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.mocks.dll
----------------------------------------------------------------------
diff --git a/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.mocks.dll b/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.mocks.dll
deleted file mode 100644
index 2250c0c..0000000
Binary files a/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.mocks.dll and /dev/null differ