You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@fineract.apache.org by Kumaranath Fernando <ku...@gmail.com> on 2017/10/10 06:21:22 UTC
Unable to start activemq process on Ubuntu Server 14.04.5
Hi!
I'm facing some difficulty when trying to startup the ActiveMQ using the
command
cd [activemq_install_dir]/bin ./activemq start
This was on a remote Ubuntu Server 14.04.5 which I was accessing to setup
Fineract.Attached is a screenshot after executing the command.Though it
says "INFO: pidfile created". I'm still facing the "ConnectionException:
Connection refused:" on fineract terminal.
Any help is appreciated!
Regards,
Kumaranath Fernando
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by courage angeh <co...@gmail.com>.
No. I don't. But I will document it.
On Thu, Oct 12, 2017 at 9:03 AM, Awasum Yannick <ya...@gmail.com>
wrote:
> Courage,
>
> Do you have this process all documented in your final GSoC report or
> project Wiki?
>
> So people should not get into such problems in the future.
>
> Thanks
>
> On Thu, Oct 12, 2017 at 8:20 AM, Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi Everyone!
> >
> > Was able to successfully resolve ActiveMQ not starting up.Thanks Courage
> > for reaching me out. For the kind information of anyone who would run
> into
> > the same issue in future.
> >
> > 1. Open the file [activemq installation
> > directory]/bin/[linux-x86-32/linux-x86-64]/activemq
> >
> > 2. Uncomment the line RUN_AS_USER.
> >
> > 3. Edit like RUN_AS_USER =Your username.
> >
> > 4.Save it and exit.
> >
> > 5.Go back to [activemq installation directory]/bin/ and start the
> > activemq.
> >
> > Regards,
> > Kumaranath Fernando
> >
> > On Wed, Oct 11, 2017 at 9:30 PM, Kumaranath Fernando <
> > kumaranathfernando@gmail.com> wrote:
> >
> > > Sure, my skype id is kumaranath.fernando911 or we could call WhatsApp?
> > >
> > > On Wed, Oct 11, 2017 at 9:27 PM, courage angeh <courageangeh@gmail.com
> >
> > > wrote:
> > >
> > >> Can we have a call now?
> > >> It will be easier for me to help that way.
> > >>
> > >> On Wed, Oct 11, 2017 at 4:36 PM, Kumaranath Fernando <
> > >> kumaranathfernando@gmail.com> wrote:
> > >>
> > >> > Hi courage!
> > >> >
> > >> > I've tried that already, it did not work, maybe there 's some
> special
> > >> > configuration for ActiveMQ Linux?
> > >> > I've followed the exact steps in
> > >> > http://activemq.apache.org/getting-started.html though.
> > >> >
> > >> > Regards,
> > >> > Kumaranath Fernando
> > >> >
> > >> > On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <
> > courageangeh@gmail.com>
> > >> > wrote:
> > >> >
> > >> > > Can you log out as a root user and try again?
> > >> > >
> > >> > > On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
> > >> > > kumaranathfernando@gmail.com> wrote:
> > >> > >
> > >> > > > Hi courage!
> > >> > > >
> > >> > > > It's already attached to this thread twice. You should be able
> to
> > >> see
> > >> > it
> > >> > > I
> > >> > > > guess. Anyways, here's a link
> > >> > > > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28>
> > to
> > >> it.
> > >> > > >
> > >> > > > Regards,
> > >> > > > Kumaranath Fernando
> > >> > > >
> > >> > > > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <
> > >> courageangeh@gmail.com
> > >> > >
> > >> > > > wrote:
> > >> > > >
> > >> > > > > Hi Fernando.
> > >> > > > >
> > >> > > > > Please can mail me your screenshot please?
> > >> > > > >
> > >> > > > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> > >> > > > > kumaranathfernando@gmail.com> wrote:
> > >> > > > >
> > >> > > > > > Hi Courage!
> > >> > > > > >
> > >> > > > > > It's a screenshot I have for the moment, I could not find
> the
> > >> > error
> > >> > > > logs
> > >> > > > > > for activemq. I've also tried sudo ./activemq start which
> > gives
> > >> the
> > >> > > > same
> > >> > > > > > output.
> > >> > > > > >
> > >> > > > > > Regards,
> > >> > > > > > Kumaranath Fernando
> > >> > > > > >
> > >> > > > > >
> > >> > > > > >
> > >> > > > > > On 11 Oct 2017 2:13 pm, "courage angeh" <
> > courageangeh@gmail.com
> > >> >
> > >> > > > wrote:
> > >> > > > > >
> > >> > > > > >> Yes, I can. Kumaranath please can you resend the log file
> > >> > containing
> > >> > > > the
> > >> > > > > >> error you get. I cannt find it on your 1st mail.
> > >> > > > > >>
> > >> > > > > >> Thanks,
> > >> > > > > >> Courage
> > >> > > > > >>
> > >> > > > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <
> > >> mohitbajo36@gmail.com>
> > >> > > > wrote:
> > >> > > > > >>
> > >> > > > > >> > Hello Courage,
> > >> > > > > >> >
> > >> > > > > >> > Would you like to see if you can help here. I believe you
> > >> have
> > >> > > been
> > >> > > > > >> > working on it on GSoC project.
> > >> > > > > >> >
> > >> > > > > >> > Regards
> > >> > > > > >> > Mohit
> > >> > > > > >> >
> > >> > > > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <
> > >> markus.geiss@kuelap.io>
> > >> > > > > wrote:
> > >> > > > > >> >
> > >> > > > > >> >> ha ha ...sorry ... thought you were talking about the
> new
> > >> stuff
> > >> > > we
> > >> > > > > are
> > >> > > > > >> >> working on.
> > >> > > > > >> >>
> > >> > > > > >> >> Sadly I'm not the right person to answer the questions
> for
> > >> the
> > >> > > > > current
> > >> > > > > >> >> version setup.
> > >> > > > > >> >>
> > >> > > > > >> >> Let somebody who knows about it jump in.
> > >> > > > > >> >>
> > >> > > > > >> >> Cheers
> > >> > > > > >> >>
> > >> > > > > >> >> Markus
> > >> > > > > >> >>
> > >> > > > > >> >> .::Yagni likes a DRY KISS::.
> > >> > > > > >> >>
> > >> > > > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> > >> > > > > >> >> kumaranathfernando@gmail.com> wrote:
> > >> > > > > >> >>
> > >> > > > > >> >> > Hi Markus!
> > >> > > > > >> >> >
> > >> > > > > >> >> > Thanks for your response.Not really clear on what
> you're
> > >> > trying
> > >> > > > > >> >> > express here*(I'm
> > >> > > > > >> >> > referring to Apache Fineract here and not Fineract
> > CN)*.I
> > >> was
> > >> > > > able
> > >> > > > > to
> > >> > > > > >> >> start
> > >> > > > > >> >> > up the server, using ./gradlew clean tomcatRunWar but
> it
> > >> does
> > >> > > not
> > >> > > > > >> >> connect
> > >> > > > > >> >> > with the activemq since it's not started properly.
> > >> > > > > >> >> >
> > >> > > > > >> >> > I followed the instructions on
> > >> > > > > >> >> > http://activemq.apache.org/getting-started.html for
> > unix,
> > >> > with
> > >> > > > > root
> > >> > > > > >> >> being
> > >> > > > > >> >> > the user, screenshot of error log attached above.
> > >> > > > > >> >> >
> > >> > > > > >> >> > Any help is appreciated!
> > >> > > > > >> >> >
> > >> > > > > >> >> > Regards,
> > >> > > > > >> >> > Kumaranath Fernando
> > >> > > > > >> >> >
> > >> > > > > >> >> >
> > >> > > > > >> >> >
> > >> > > > > >> >> >
> > >> > > > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> > >> > > > > >> markus.geiss@kuelap.io>
> > >> > > > > >> >> > wrote:
> > >> > > > > >> >> >
> > >> > > > > >> >> > > ok ... sounds like you are not using a centralized
> > >> > > > configuration
> > >> > > > > >> than
> > >> > > > > >> >> ...
> > >> > > > > >> >> > > so if you start the services with java -jar simply
> > add
> > >> the
> > >> > > > > >> following
> > >> > > > > >> >> > > before -jar
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > You need to add this to all services ...
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > Cheers
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > Markus
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > .::Yagni likes a DRY KISS::.
> > >> > > > > >> >> > >
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando
> <
> > >> > > > > >> >> > > kumaranathfernando@gmail.com> wrote:
> > >> > > > > >> >> > >
> > >> > > > > >> >> > > > Hi Markus!
> > >> > > > > >> >> > > >
> > >> > > > > >> >> > > > Thanks for your response.Where do I locate my
> > >> > > > application.yml?
> > >> > > > > >> >> > > >
> > >> > > > > >> >> > > > Regards,
> > >> > > > > >> >> > > > Kumaranath Fernando
> > >> > > > > >> >> > > >
> > >> > > > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> > >> > > > > >> >> markus.geiss@kuelap.io>
> > >> > > > > >> >> > > > wrote:
> > >> > > > > >> >> > > >
> > >> > > > > >> >> > > > > Hey Kumaranath,
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > can you share your application.yml so we can
> check
> > >> the
> > >> > > > > >> connection
> > >> > > > > >> >> > > > > parameters for ActiveMQ ...
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > By default it will try to connect to
> > >> > > vm://localhost?broker.
> > >> > > > > >> >> > > > > persistent=false
> > >> > > > > >> >> > > > > an embedded version.
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > Cheers
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > Markus
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > .::Yagni likes a DRY KISS::.
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath
> > Fernando
> > >> <
> > >> > > > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > > > > Hi!
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > > I'm facing some difficulty when trying to
> > startup
> > >> the
> > >> > > > > >> ActiveMQ
> > >> > > > > >> >> > using
> > >> > > > > >> >> > > > the
> > >> > > > > >> >> > > > > > command
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5
> > which I
> > >> > was
> > >> > > > > >> >> accessing to
> > >> > > > > >> >> > > > setup
> > >> > > > > >> >> > > > > > Fineract.Attached is a screenshot after
> > executing
> > >> the
> > >> > > > > >> >> > command.Though
> > >> > > > > >> >> > > it
> > >> > > > > >> >> > > > > > says "INFO: pidfile created". I'm still facing
> > the
> > >> > > > > >> >> > > > "ConnectionException:
> > >> > > > > >> >> > > > > > Connection refused:" on fineract terminal.
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > > Any help is appreciated!
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > > Regards,
> > >> > > > > >> >> > > > > > Kumaranath Fernando
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > > >
> > >> > > > > >> >> > > > >
> > >> > > > > >> >> > > >
> > >> > > > > >> >> > >
> > >> > > > > >> >> >
> > >> > > > > >> >>
> > >> > > > > >> >
> > >> > > > > >>
> > >> > > > > >
> > >> > > > >
> > >> > > >
> > >> > >
> > >> >
> > >>
> > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Awasum Yannick <ya...@gmail.com>.
Courage,
Do you have this process all documented in your final GSoC report or
project Wiki?
So people should not get into such problems in the future.
Thanks
On Thu, Oct 12, 2017 at 8:20 AM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi Everyone!
>
> Was able to successfully resolve ActiveMQ not starting up.Thanks Courage
> for reaching me out. For the kind information of anyone who would run into
> the same issue in future.
>
> 1. Open the file [activemq installation
> directory]/bin/[linux-x86-32/linux-x86-64]/activemq
>
> 2. Uncomment the line RUN_AS_USER.
>
> 3. Edit like RUN_AS_USER =Your username.
>
> 4.Save it and exit.
>
> 5.Go back to [activemq installation directory]/bin/ and start the
> activemq.
>
> Regards,
> Kumaranath Fernando
>
> On Wed, Oct 11, 2017 at 9:30 PM, Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Sure, my skype id is kumaranath.fernando911 or we could call WhatsApp?
> >
> > On Wed, Oct 11, 2017 at 9:27 PM, courage angeh <co...@gmail.com>
> > wrote:
> >
> >> Can we have a call now?
> >> It will be easier for me to help that way.
> >>
> >> On Wed, Oct 11, 2017 at 4:36 PM, Kumaranath Fernando <
> >> kumaranathfernando@gmail.com> wrote:
> >>
> >> > Hi courage!
> >> >
> >> > I've tried that already, it did not work, maybe there 's some special
> >> > configuration for ActiveMQ Linux?
> >> > I've followed the exact steps in
> >> > http://activemq.apache.org/getting-started.html though.
> >> >
> >> > Regards,
> >> > Kumaranath Fernando
> >> >
> >> > On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <
> courageangeh@gmail.com>
> >> > wrote:
> >> >
> >> > > Can you log out as a root user and try again?
> >> > >
> >> > > On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
> >> > > kumaranathfernando@gmail.com> wrote:
> >> > >
> >> > > > Hi courage!
> >> > > >
> >> > > > It's already attached to this thread twice. You should be able to
> >> see
> >> > it
> >> > > I
> >> > > > guess. Anyways, here's a link
> >> > > > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28>
> to
> >> it.
> >> > > >
> >> > > > Regards,
> >> > > > Kumaranath Fernando
> >> > > >
> >> > > > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <
> >> courageangeh@gmail.com
> >> > >
> >> > > > wrote:
> >> > > >
> >> > > > > Hi Fernando.
> >> > > > >
> >> > > > > Please can mail me your screenshot please?
> >> > > > >
> >> > > > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> >> > > > > kumaranathfernando@gmail.com> wrote:
> >> > > > >
> >> > > > > > Hi Courage!
> >> > > > > >
> >> > > > > > It's a screenshot I have for the moment, I could not find the
> >> > error
> >> > > > logs
> >> > > > > > for activemq. I've also tried sudo ./activemq start which
> gives
> >> the
> >> > > > same
> >> > > > > > output.
> >> > > > > >
> >> > > > > > Regards,
> >> > > > > > Kumaranath Fernando
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > > On 11 Oct 2017 2:13 pm, "courage angeh" <
> courageangeh@gmail.com
> >> >
> >> > > > wrote:
> >> > > > > >
> >> > > > > >> Yes, I can. Kumaranath please can you resend the log file
> >> > containing
> >> > > > the
> >> > > > > >> error you get. I cannt find it on your 1st mail.
> >> > > > > >>
> >> > > > > >> Thanks,
> >> > > > > >> Courage
> >> > > > > >>
> >> > > > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <
> >> mohitbajo36@gmail.com>
> >> > > > wrote:
> >> > > > > >>
> >> > > > > >> > Hello Courage,
> >> > > > > >> >
> >> > > > > >> > Would you like to see if you can help here. I believe you
> >> have
> >> > > been
> >> > > > > >> > working on it on GSoC project.
> >> > > > > >> >
> >> > > > > >> > Regards
> >> > > > > >> > Mohit
> >> > > > > >> >
> >> > > > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <
> >> markus.geiss@kuelap.io>
> >> > > > > wrote:
> >> > > > > >> >
> >> > > > > >> >> ha ha ...sorry ... thought you were talking about the new
> >> stuff
> >> > > we
> >> > > > > are
> >> > > > > >> >> working on.
> >> > > > > >> >>
> >> > > > > >> >> Sadly I'm not the right person to answer the questions for
> >> the
> >> > > > > current
> >> > > > > >> >> version setup.
> >> > > > > >> >>
> >> > > > > >> >> Let somebody who knows about it jump in.
> >> > > > > >> >>
> >> > > > > >> >> Cheers
> >> > > > > >> >>
> >> > > > > >> >> Markus
> >> > > > > >> >>
> >> > > > > >> >> .::Yagni likes a DRY KISS::.
> >> > > > > >> >>
> >> > > > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> >> > > > > >> >> kumaranathfernando@gmail.com> wrote:
> >> > > > > >> >>
> >> > > > > >> >> > Hi Markus!
> >> > > > > >> >> >
> >> > > > > >> >> > Thanks for your response.Not really clear on what you're
> >> > trying
> >> > > > > >> >> > express here*(I'm
> >> > > > > >> >> > referring to Apache Fineract here and not Fineract
> CN)*.I
> >> was
> >> > > > able
> >> > > > > to
> >> > > > > >> >> start
> >> > > > > >> >> > up the server, using ./gradlew clean tomcatRunWar but it
> >> does
> >> > > not
> >> > > > > >> >> connect
> >> > > > > >> >> > with the activemq since it's not started properly.
> >> > > > > >> >> >
> >> > > > > >> >> > I followed the instructions on
> >> > > > > >> >> > http://activemq.apache.org/getting-started.html for
> unix,
> >> > with
> >> > > > > root
> >> > > > > >> >> being
> >> > > > > >> >> > the user, screenshot of error log attached above.
> >> > > > > >> >> >
> >> > > > > >> >> > Any help is appreciated!
> >> > > > > >> >> >
> >> > > > > >> >> > Regards,
> >> > > > > >> >> > Kumaranath Fernando
> >> > > > > >> >> >
> >> > > > > >> >> >
> >> > > > > >> >> >
> >> > > > > >> >> >
> >> > > > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> >> > > > > >> markus.geiss@kuelap.io>
> >> > > > > >> >> > wrote:
> >> > > > > >> >> >
> >> > > > > >> >> > > ok ... sounds like you are not using a centralized
> >> > > > configuration
> >> > > > > >> than
> >> > > > > >> >> ...
> >> > > > > >> >> > > so if you start the services with java -jar simply
> add
> >> the
> >> > > > > >> following
> >> > > > > >> >> > > before -jar
> >> > > > > >> >> > >
> >> > > > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> >> > > > > >> >> > >
> >> > > > > >> >> > > You need to add this to all services ...
> >> > > > > >> >> > >
> >> > > > > >> >> > > Cheers
> >> > > > > >> >> > >
> >> > > > > >> >> > > Markus
> >> > > > > >> >> > >
> >> > > > > >> >> > > .::Yagni likes a DRY KISS::.
> >> > > > > >> >> > >
> >> > > > > >> >> > >
> >> > > > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> >> > > > > >> >> > > kumaranathfernando@gmail.com> wrote:
> >> > > > > >> >> > >
> >> > > > > >> >> > > > Hi Markus!
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > Thanks for your response.Where do I locate my
> >> > > > application.yml?
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > Regards,
> >> > > > > >> >> > > > Kumaranath Fernando
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> >> > > > > >> >> markus.geiss@kuelap.io>
> >> > > > > >> >> > > > wrote:
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > > Hey Kumaranath,
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > can you share your application.yml so we can check
> >> the
> >> > > > > >> connection
> >> > > > > >> >> > > > > parameters for ActiveMQ ...
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > By default it will try to connect to
> >> > > vm://localhost?broker.
> >> > > > > >> >> > > > > persistent=false
> >> > > > > >> >> > > > > an embedded version.
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > Cheers
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > Markus
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > .::Yagni likes a DRY KISS::.
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath
> Fernando
> >> <
> >> > > > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > > Hi!
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > I'm facing some difficulty when trying to
> startup
> >> the
> >> > > > > >> ActiveMQ
> >> > > > > >> >> > using
> >> > > > > >> >> > > > the
> >> > > > > >> >> > > > > > command
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5
> which I
> >> > was
> >> > > > > >> >> accessing to
> >> > > > > >> >> > > > setup
> >> > > > > >> >> > > > > > Fineract.Attached is a screenshot after
> executing
> >> the
> >> > > > > >> >> > command.Though
> >> > > > > >> >> > > it
> >> > > > > >> >> > > > > > says "INFO: pidfile created". I'm still facing
> the
> >> > > > > >> >> > > > "ConnectionException:
> >> > > > > >> >> > > > > > Connection refused:" on fineract terminal.
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > Any help is appreciated!
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > Regards,
> >> > > > > >> >> > > > > > Kumaranath Fernando
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > >
> >> > > > > >> >> > >
> >> > > > > >> >> >
> >> > > > > >> >>
> >> > > > > >> >
> >> > > > > >>
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by courage angeh <co...@gmail.com>.
You are welcome Kumaranath.
Any time.
On Thu, Oct 12, 2017 at 8:20 AM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi Everyone!
>
> Was able to successfully resolve ActiveMQ not starting up.Thanks Courage
> for reaching me out. For the kind information of anyone who would run into
> the same issue in future.
>
> 1. Open the file [activemq installation
> directory]/bin/[linux-x86-32/linux-x86-64]/activemq
>
> 2. Uncomment the line RUN_AS_USER.
>
> 3. Edit like RUN_AS_USER =Your username.
>
> 4.Save it and exit.
>
> 5.Go back to [activemq installation directory]/bin/ and start the
> activemq.
>
> Regards,
> Kumaranath Fernando
>
> On Wed, Oct 11, 2017 at 9:30 PM, Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Sure, my skype id is kumaranath.fernando911 or we could call WhatsApp?
> >
> > On Wed, Oct 11, 2017 at 9:27 PM, courage angeh <co...@gmail.com>
> > wrote:
> >
> >> Can we have a call now?
> >> It will be easier for me to help that way.
> >>
> >> On Wed, Oct 11, 2017 at 4:36 PM, Kumaranath Fernando <
> >> kumaranathfernando@gmail.com> wrote:
> >>
> >> > Hi courage!
> >> >
> >> > I've tried that already, it did not work, maybe there 's some special
> >> > configuration for ActiveMQ Linux?
> >> > I've followed the exact steps in
> >> > http://activemq.apache.org/getting-started.html though.
> >> >
> >> > Regards,
> >> > Kumaranath Fernando
> >> >
> >> > On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <
> courageangeh@gmail.com>
> >> > wrote:
> >> >
> >> > > Can you log out as a root user and try again?
> >> > >
> >> > > On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
> >> > > kumaranathfernando@gmail.com> wrote:
> >> > >
> >> > > > Hi courage!
> >> > > >
> >> > > > It's already attached to this thread twice. You should be able to
> >> see
> >> > it
> >> > > I
> >> > > > guess. Anyways, here's a link
> >> > > > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28>
> to
> >> it.
> >> > > >
> >> > > > Regards,
> >> > > > Kumaranath Fernando
> >> > > >
> >> > > > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <
> >> courageangeh@gmail.com
> >> > >
> >> > > > wrote:
> >> > > >
> >> > > > > Hi Fernando.
> >> > > > >
> >> > > > > Please can mail me your screenshot please?
> >> > > > >
> >> > > > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> >> > > > > kumaranathfernando@gmail.com> wrote:
> >> > > > >
> >> > > > > > Hi Courage!
> >> > > > > >
> >> > > > > > It's a screenshot I have for the moment, I could not find the
> >> > error
> >> > > > logs
> >> > > > > > for activemq. I've also tried sudo ./activemq start which
> gives
> >> the
> >> > > > same
> >> > > > > > output.
> >> > > > > >
> >> > > > > > Regards,
> >> > > > > > Kumaranath Fernando
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > > On 11 Oct 2017 2:13 pm, "courage angeh" <
> courageangeh@gmail.com
> >> >
> >> > > > wrote:
> >> > > > > >
> >> > > > > >> Yes, I can. Kumaranath please can you resend the log file
> >> > containing
> >> > > > the
> >> > > > > >> error you get. I cannt find it on your 1st mail.
> >> > > > > >>
> >> > > > > >> Thanks,
> >> > > > > >> Courage
> >> > > > > >>
> >> > > > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <
> >> mohitbajo36@gmail.com>
> >> > > > wrote:
> >> > > > > >>
> >> > > > > >> > Hello Courage,
> >> > > > > >> >
> >> > > > > >> > Would you like to see if you can help here. I believe you
> >> have
> >> > > been
> >> > > > > >> > working on it on GSoC project.
> >> > > > > >> >
> >> > > > > >> > Regards
> >> > > > > >> > Mohit
> >> > > > > >> >
> >> > > > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <
> >> markus.geiss@kuelap.io>
> >> > > > > wrote:
> >> > > > > >> >
> >> > > > > >> >> ha ha ...sorry ... thought you were talking about the new
> >> stuff
> >> > > we
> >> > > > > are
> >> > > > > >> >> working on.
> >> > > > > >> >>
> >> > > > > >> >> Sadly I'm not the right person to answer the questions for
> >> the
> >> > > > > current
> >> > > > > >> >> version setup.
> >> > > > > >> >>
> >> > > > > >> >> Let somebody who knows about it jump in.
> >> > > > > >> >>
> >> > > > > >> >> Cheers
> >> > > > > >> >>
> >> > > > > >> >> Markus
> >> > > > > >> >>
> >> > > > > >> >> .::Yagni likes a DRY KISS::.
> >> > > > > >> >>
> >> > > > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> >> > > > > >> >> kumaranathfernando@gmail.com> wrote:
> >> > > > > >> >>
> >> > > > > >> >> > Hi Markus!
> >> > > > > >> >> >
> >> > > > > >> >> > Thanks for your response.Not really clear on what you're
> >> > trying
> >> > > > > >> >> > express here*(I'm
> >> > > > > >> >> > referring to Apache Fineract here and not Fineract
> CN)*.I
> >> was
> >> > > > able
> >> > > > > to
> >> > > > > >> >> start
> >> > > > > >> >> > up the server, using ./gradlew clean tomcatRunWar but it
> >> does
> >> > > not
> >> > > > > >> >> connect
> >> > > > > >> >> > with the activemq since it's not started properly.
> >> > > > > >> >> >
> >> > > > > >> >> > I followed the instructions on
> >> > > > > >> >> > http://activemq.apache.org/getting-started.html for
> unix,
> >> > with
> >> > > > > root
> >> > > > > >> >> being
> >> > > > > >> >> > the user, screenshot of error log attached above.
> >> > > > > >> >> >
> >> > > > > >> >> > Any help is appreciated!
> >> > > > > >> >> >
> >> > > > > >> >> > Regards,
> >> > > > > >> >> > Kumaranath Fernando
> >> > > > > >> >> >
> >> > > > > >> >> >
> >> > > > > >> >> >
> >> > > > > >> >> >
> >> > > > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> >> > > > > >> markus.geiss@kuelap.io>
> >> > > > > >> >> > wrote:
> >> > > > > >> >> >
> >> > > > > >> >> > > ok ... sounds like you are not using a centralized
> >> > > > configuration
> >> > > > > >> than
> >> > > > > >> >> ...
> >> > > > > >> >> > > so if you start the services with java -jar simply
> add
> >> the
> >> > > > > >> following
> >> > > > > >> >> > > before -jar
> >> > > > > >> >> > >
> >> > > > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> >> > > > > >> >> > >
> >> > > > > >> >> > > You need to add this to all services ...
> >> > > > > >> >> > >
> >> > > > > >> >> > > Cheers
> >> > > > > >> >> > >
> >> > > > > >> >> > > Markus
> >> > > > > >> >> > >
> >> > > > > >> >> > > .::Yagni likes a DRY KISS::.
> >> > > > > >> >> > >
> >> > > > > >> >> > >
> >> > > > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> >> > > > > >> >> > > kumaranathfernando@gmail.com> wrote:
> >> > > > > >> >> > >
> >> > > > > >> >> > > > Hi Markus!
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > Thanks for your response.Where do I locate my
> >> > > > application.yml?
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > Regards,
> >> > > > > >> >> > > > Kumaranath Fernando
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> >> > > > > >> >> markus.geiss@kuelap.io>
> >> > > > > >> >> > > > wrote:
> >> > > > > >> >> > > >
> >> > > > > >> >> > > > > Hey Kumaranath,
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > can you share your application.yml so we can check
> >> the
> >> > > > > >> connection
> >> > > > > >> >> > > > > parameters for ActiveMQ ...
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > By default it will try to connect to
> >> > > vm://localhost?broker.
> >> > > > > >> >> > > > > persistent=false
> >> > > > > >> >> > > > > an embedded version.
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > Cheers
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > Markus
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > .::Yagni likes a DRY KISS::.
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath
> Fernando
> >> <
> >> > > > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > > > > Hi!
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > I'm facing some difficulty when trying to
> startup
> >> the
> >> > > > > >> ActiveMQ
> >> > > > > >> >> > using
> >> > > > > >> >> > > > the
> >> > > > > >> >> > > > > > command
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5
> which I
> >> > was
> >> > > > > >> >> accessing to
> >> > > > > >> >> > > > setup
> >> > > > > >> >> > > > > > Fineract.Attached is a screenshot after
> executing
> >> the
> >> > > > > >> >> > command.Though
> >> > > > > >> >> > > it
> >> > > > > >> >> > > > > > says "INFO: pidfile created". I'm still facing
> the
> >> > > > > >> >> > > > "ConnectionException:
> >> > > > > >> >> > > > > > Connection refused:" on fineract terminal.
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > Any help is appreciated!
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > > Regards,
> >> > > > > >> >> > > > > > Kumaranath Fernando
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > > >
> >> > > > > >> >> > > > >
> >> > > > > >> >> > > >
> >> > > > > >> >> > >
> >> > > > > >> >> >
> >> > > > > >> >>
> >> > > > > >> >
> >> > > > > >>
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Hi Everyone!
Was able to successfully resolve ActiveMQ not starting up.Thanks Courage
for reaching me out. For the kind information of anyone who would run into
the same issue in future.
1. Open the file [activemq installation
directory]/bin/[linux-x86-32/linux-x86-64]/activemq
2. Uncomment the line RUN_AS_USER.
3. Edit like RUN_AS_USER =Your username.
4.Save it and exit.
5.Go back to [activemq installation directory]/bin/ and start the
activemq.
Regards,
Kumaranath Fernando
On Wed, Oct 11, 2017 at 9:30 PM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Sure, my skype id is kumaranath.fernando911 or we could call WhatsApp?
>
> On Wed, Oct 11, 2017 at 9:27 PM, courage angeh <co...@gmail.com>
> wrote:
>
>> Can we have a call now?
>> It will be easier for me to help that way.
>>
>> On Wed, Oct 11, 2017 at 4:36 PM, Kumaranath Fernando <
>> kumaranathfernando@gmail.com> wrote:
>>
>> > Hi courage!
>> >
>> > I've tried that already, it did not work, maybe there 's some special
>> > configuration for ActiveMQ Linux?
>> > I've followed the exact steps in
>> > http://activemq.apache.org/getting-started.html though.
>> >
>> > Regards,
>> > Kumaranath Fernando
>> >
>> > On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <co...@gmail.com>
>> > wrote:
>> >
>> > > Can you log out as a root user and try again?
>> > >
>> > > On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
>> > > kumaranathfernando@gmail.com> wrote:
>> > >
>> > > > Hi courage!
>> > > >
>> > > > It's already attached to this thread twice. You should be able to
>> see
>> > it
>> > > I
>> > > > guess. Anyways, here's a link
>> > > > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28> to
>> it.
>> > > >
>> > > > Regards,
>> > > > Kumaranath Fernando
>> > > >
>> > > > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <
>> courageangeh@gmail.com
>> > >
>> > > > wrote:
>> > > >
>> > > > > Hi Fernando.
>> > > > >
>> > > > > Please can mail me your screenshot please?
>> > > > >
>> > > > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
>> > > > > kumaranathfernando@gmail.com> wrote:
>> > > > >
>> > > > > > Hi Courage!
>> > > > > >
>> > > > > > It's a screenshot I have for the moment, I could not find the
>> > error
>> > > > logs
>> > > > > > for activemq. I've also tried sudo ./activemq start which gives
>> the
>> > > > same
>> > > > > > output.
>> > > > > >
>> > > > > > Regards,
>> > > > > > Kumaranath Fernando
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > On 11 Oct 2017 2:13 pm, "courage angeh" <courageangeh@gmail.com
>> >
>> > > > wrote:
>> > > > > >
>> > > > > >> Yes, I can. Kumaranath please can you resend the log file
>> > containing
>> > > > the
>> > > > > >> error you get. I cannt find it on your 1st mail.
>> > > > > >>
>> > > > > >> Thanks,
>> > > > > >> Courage
>> > > > > >>
>> > > > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <
>> mohitbajo36@gmail.com>
>> > > > wrote:
>> > > > > >>
>> > > > > >> > Hello Courage,
>> > > > > >> >
>> > > > > >> > Would you like to see if you can help here. I believe you
>> have
>> > > been
>> > > > > >> > working on it on GSoC project.
>> > > > > >> >
>> > > > > >> > Regards
>> > > > > >> > Mohit
>> > > > > >> >
>> > > > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <
>> markus.geiss@kuelap.io>
>> > > > > wrote:
>> > > > > >> >
>> > > > > >> >> ha ha ...sorry ... thought you were talking about the new
>> stuff
>> > > we
>> > > > > are
>> > > > > >> >> working on.
>> > > > > >> >>
>> > > > > >> >> Sadly I'm not the right person to answer the questions for
>> the
>> > > > > current
>> > > > > >> >> version setup.
>> > > > > >> >>
>> > > > > >> >> Let somebody who knows about it jump in.
>> > > > > >> >>
>> > > > > >> >> Cheers
>> > > > > >> >>
>> > > > > >> >> Markus
>> > > > > >> >>
>> > > > > >> >> .::Yagni likes a DRY KISS::.
>> > > > > >> >>
>> > > > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
>> > > > > >> >> kumaranathfernando@gmail.com> wrote:
>> > > > > >> >>
>> > > > > >> >> > Hi Markus!
>> > > > > >> >> >
>> > > > > >> >> > Thanks for your response.Not really clear on what you're
>> > trying
>> > > > > >> >> > express here*(I'm
>> > > > > >> >> > referring to Apache Fineract here and not Fineract CN)*.I
>> was
>> > > > able
>> > > > > to
>> > > > > >> >> start
>> > > > > >> >> > up the server, using ./gradlew clean tomcatRunWar but it
>> does
>> > > not
>> > > > > >> >> connect
>> > > > > >> >> > with the activemq since it's not started properly.
>> > > > > >> >> >
>> > > > > >> >> > I followed the instructions on
>> > > > > >> >> > http://activemq.apache.org/getting-started.html for unix,
>> > with
>> > > > > root
>> > > > > >> >> being
>> > > > > >> >> > the user, screenshot of error log attached above.
>> > > > > >> >> >
>> > > > > >> >> > Any help is appreciated!
>> > > > > >> >> >
>> > > > > >> >> > Regards,
>> > > > > >> >> > Kumaranath Fernando
>> > > > > >> >> >
>> > > > > >> >> >
>> > > > > >> >> >
>> > > > > >> >> >
>> > > > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
>> > > > > >> markus.geiss@kuelap.io>
>> > > > > >> >> > wrote:
>> > > > > >> >> >
>> > > > > >> >> > > ok ... sounds like you are not using a centralized
>> > > > configuration
>> > > > > >> than
>> > > > > >> >> ...
>> > > > > >> >> > > so if you start the services with java -jar simply add
>> the
>> > > > > >> following
>> > > > > >> >> > > before -jar
>> > > > > >> >> > >
>> > > > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
>> > > > > >> >> > >
>> > > > > >> >> > > You need to add this to all services ...
>> > > > > >> >> > >
>> > > > > >> >> > > Cheers
>> > > > > >> >> > >
>> > > > > >> >> > > Markus
>> > > > > >> >> > >
>> > > > > >> >> > > .::Yagni likes a DRY KISS::.
>> > > > > >> >> > >
>> > > > > >> >> > >
>> > > > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
>> > > > > >> >> > > kumaranathfernando@gmail.com> wrote:
>> > > > > >> >> > >
>> > > > > >> >> > > > Hi Markus!
>> > > > > >> >> > > >
>> > > > > >> >> > > > Thanks for your response.Where do I locate my
>> > > > application.yml?
>> > > > > >> >> > > >
>> > > > > >> >> > > > Regards,
>> > > > > >> >> > > > Kumaranath Fernando
>> > > > > >> >> > > >
>> > > > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
>> > > > > >> >> markus.geiss@kuelap.io>
>> > > > > >> >> > > > wrote:
>> > > > > >> >> > > >
>> > > > > >> >> > > > > Hey Kumaranath,
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > can you share your application.yml so we can check
>> the
>> > > > > >> connection
>> > > > > >> >> > > > > parameters for ActiveMQ ...
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > By default it will try to connect to
>> > > vm://localhost?broker.
>> > > > > >> >> > > > > persistent=false
>> > > > > >> >> > > > > an embedded version.
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > Cheers
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > Markus
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > .::Yagni likes a DRY KISS::.
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando
>> <
>> > > > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
>> > > > > >> >> > > > >
>> > > > > >> >> > > > > > Hi!
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > > I'm facing some difficulty when trying to startup
>> the
>> > > > > >> ActiveMQ
>> > > > > >> >> > using
>> > > > > >> >> > > > the
>> > > > > >> >> > > > > > command
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I
>> > was
>> > > > > >> >> accessing to
>> > > > > >> >> > > > setup
>> > > > > >> >> > > > > > Fineract.Attached is a screenshot after executing
>> the
>> > > > > >> >> > command.Though
>> > > > > >> >> > > it
>> > > > > >> >> > > > > > says "INFO: pidfile created". I'm still facing the
>> > > > > >> >> > > > "ConnectionException:
>> > > > > >> >> > > > > > Connection refused:" on fineract terminal.
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > > Any help is appreciated!
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > > Regards,
>> > > > > >> >> > > > > > Kumaranath Fernando
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > > >
>> > > > > >> >> > > > >
>> > > > > >> >> > > >
>> > > > > >> >> > >
>> > > > > >> >> >
>> > > > > >> >>
>> > > > > >> >
>> > > > > >>
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Sure, my skype id is kumaranath.fernando911 or we could call WhatsApp?
On Wed, Oct 11, 2017 at 9:27 PM, courage angeh <co...@gmail.com>
wrote:
> Can we have a call now?
> It will be easier for me to help that way.
>
> On Wed, Oct 11, 2017 at 4:36 PM, Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi courage!
> >
> > I've tried that already, it did not work, maybe there 's some special
> > configuration for ActiveMQ Linux?
> > I've followed the exact steps in
> > http://activemq.apache.org/getting-started.html though.
> >
> > Regards,
> > Kumaranath Fernando
> >
> > On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <co...@gmail.com>
> > wrote:
> >
> > > Can you log out as a root user and try again?
> > >
> > > On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
> > > kumaranathfernando@gmail.com> wrote:
> > >
> > > > Hi courage!
> > > >
> > > > It's already attached to this thread twice. You should be able to see
> > it
> > > I
> > > > guess. Anyways, here's a link
> > > > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28> to
> it.
> > > >
> > > > Regards,
> > > > Kumaranath Fernando
> > > >
> > > > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <
> courageangeh@gmail.com
> > >
> > > > wrote:
> > > >
> > > > > Hi Fernando.
> > > > >
> > > > > Please can mail me your screenshot please?
> > > > >
> > > > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> > > > > kumaranathfernando@gmail.com> wrote:
> > > > >
> > > > > > Hi Courage!
> > > > > >
> > > > > > It's a screenshot I have for the moment, I could not find the
> > error
> > > > logs
> > > > > > for activemq. I've also tried sudo ./activemq start which gives
> the
> > > > same
> > > > > > output.
> > > > > >
> > > > > > Regards,
> > > > > > Kumaranath Fernando
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com>
> > > > wrote:
> > > > > >
> > > > > >> Yes, I can. Kumaranath please can you resend the log file
> > containing
> > > > the
> > > > > >> error you get. I cannt find it on your 1st mail.
> > > > > >>
> > > > > >> Thanks,
> > > > > >> Courage
> > > > > >>
> > > > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mohitbajo36@gmail.com
> >
> > > > wrote:
> > > > > >>
> > > > > >> > Hello Courage,
> > > > > >> >
> > > > > >> > Would you like to see if you can help here. I believe you have
> > > been
> > > > > >> > working on it on GSoC project.
> > > > > >> >
> > > > > >> > Regards
> > > > > >> > Mohit
> > > > > >> >
> > > > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <
> markus.geiss@kuelap.io>
> > > > > wrote:
> > > > > >> >
> > > > > >> >> ha ha ...sorry ... thought you were talking about the new
> stuff
> > > we
> > > > > are
> > > > > >> >> working on.
> > > > > >> >>
> > > > > >> >> Sadly I'm not the right person to answer the questions for
> the
> > > > > current
> > > > > >> >> version setup.
> > > > > >> >>
> > > > > >> >> Let somebody who knows about it jump in.
> > > > > >> >>
> > > > > >> >> Cheers
> > > > > >> >>
> > > > > >> >> Markus
> > > > > >> >>
> > > > > >> >> .::Yagni likes a DRY KISS::.
> > > > > >> >>
> > > > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> > > > > >> >> kumaranathfernando@gmail.com> wrote:
> > > > > >> >>
> > > > > >> >> > Hi Markus!
> > > > > >> >> >
> > > > > >> >> > Thanks for your response.Not really clear on what you're
> > trying
> > > > > >> >> > express here*(I'm
> > > > > >> >> > referring to Apache Fineract here and not Fineract CN)*.I
> was
> > > > able
> > > > > to
> > > > > >> >> start
> > > > > >> >> > up the server, using ./gradlew clean tomcatRunWar but it
> does
> > > not
> > > > > >> >> connect
> > > > > >> >> > with the activemq since it's not started properly.
> > > > > >> >> >
> > > > > >> >> > I followed the instructions on
> > > > > >> >> > http://activemq.apache.org/getting-started.html for unix,
> > with
> > > > > root
> > > > > >> >> being
> > > > > >> >> > the user, screenshot of error log attached above.
> > > > > >> >> >
> > > > > >> >> > Any help is appreciated!
> > > > > >> >> >
> > > > > >> >> > Regards,
> > > > > >> >> > Kumaranath Fernando
> > > > > >> >> >
> > > > > >> >> >
> > > > > >> >> >
> > > > > >> >> >
> > > > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> > > > > >> markus.geiss@kuelap.io>
> > > > > >> >> > wrote:
> > > > > >> >> >
> > > > > >> >> > > ok ... sounds like you are not using a centralized
> > > > configuration
> > > > > >> than
> > > > > >> >> ...
> > > > > >> >> > > so if you start the services with java -jar simply add
> the
> > > > > >> following
> > > > > >> >> > > before -jar
> > > > > >> >> > >
> > > > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> > > > > >> >> > >
> > > > > >> >> > > You need to add this to all services ...
> > > > > >> >> > >
> > > > > >> >> > > Cheers
> > > > > >> >> > >
> > > > > >> >> > > Markus
> > > > > >> >> > >
> > > > > >> >> > > .::Yagni likes a DRY KISS::.
> > > > > >> >> > >
> > > > > >> >> > >
> > > > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> > > > > >> >> > > kumaranathfernando@gmail.com> wrote:
> > > > > >> >> > >
> > > > > >> >> > > > Hi Markus!
> > > > > >> >> > > >
> > > > > >> >> > > > Thanks for your response.Where do I locate my
> > > > application.yml?
> > > > > >> >> > > >
> > > > > >> >> > > > Regards,
> > > > > >> >> > > > Kumaranath Fernando
> > > > > >> >> > > >
> > > > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> > > > > >> >> markus.geiss@kuelap.io>
> > > > > >> >> > > > wrote:
> > > > > >> >> > > >
> > > > > >> >> > > > > Hey Kumaranath,
> > > > > >> >> > > > >
> > > > > >> >> > > > > can you share your application.yml so we can check
> the
> > > > > >> connection
> > > > > >> >> > > > > parameters for ActiveMQ ...
> > > > > >> >> > > > >
> > > > > >> >> > > > > By default it will try to connect to
> > > vm://localhost?broker.
> > > > > >> >> > > > > persistent=false
> > > > > >> >> > > > > an embedded version.
> > > > > >> >> > > > >
> > > > > >> >> > > > > Cheers
> > > > > >> >> > > > >
> > > > > >> >> > > > > Markus
> > > > > >> >> > > > >
> > > > > >> >> > > > > .::Yagni likes a DRY KISS::.
> > > > > >> >> > > > >
> > > > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > > > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> > > > > >> >> > > > >
> > > > > >> >> > > > > > Hi!
> > > > > >> >> > > > > >
> > > > > >> >> > > > > > I'm facing some difficulty when trying to startup
> the
> > > > > >> ActiveMQ
> > > > > >> >> > using
> > > > > >> >> > > > the
> > > > > >> >> > > > > > command
> > > > > >> >> > > > > >
> > > > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> > > > > >> >> > > > > >
> > > > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I
> > was
> > > > > >> >> accessing to
> > > > > >> >> > > > setup
> > > > > >> >> > > > > > Fineract.Attached is a screenshot after executing
> the
> > > > > >> >> > command.Though
> > > > > >> >> > > it
> > > > > >> >> > > > > > says "INFO: pidfile created". I'm still facing the
> > > > > >> >> > > > "ConnectionException:
> > > > > >> >> > > > > > Connection refused:" on fineract terminal.
> > > > > >> >> > > > > >
> > > > > >> >> > > > > > Any help is appreciated!
> > > > > >> >> > > > > >
> > > > > >> >> > > > > > Regards,
> > > > > >> >> > > > > > Kumaranath Fernando
> > > > > >> >> > > > > >
> > > > > >> >> > > > > >
> > > > > >> >> > > > > >
> > > > > >> >> > > > > >
> > > > > >> >> > > > > >
> > > > > >> >> > > > >
> > > > > >> >> > > >
> > > > > >> >> > >
> > > > > >> >> >
> > > > > >> >>
> > > > > >> >
> > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by courage angeh <co...@gmail.com>.
Can we have a call now?
It will be easier for me to help that way.
On Wed, Oct 11, 2017 at 4:36 PM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi courage!
>
> I've tried that already, it did not work, maybe there 's some special
> configuration for ActiveMQ Linux?
> I've followed the exact steps in
> http://activemq.apache.org/getting-started.html though.
>
> Regards,
> Kumaranath Fernando
>
> On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <co...@gmail.com>
> wrote:
>
> > Can you log out as a root user and try again?
> >
> > On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
> > kumaranathfernando@gmail.com> wrote:
> >
> > > Hi courage!
> > >
> > > It's already attached to this thread twice. You should be able to see
> it
> > I
> > > guess. Anyways, here's a link
> > > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28> to it.
> > >
> > > Regards,
> > > Kumaranath Fernando
> > >
> > > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <courageangeh@gmail.com
> >
> > > wrote:
> > >
> > > > Hi Fernando.
> > > >
> > > > Please can mail me your screenshot please?
> > > >
> > > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> > > > kumaranathfernando@gmail.com> wrote:
> > > >
> > > > > Hi Courage!
> > > > >
> > > > > It's a screenshot I have for the moment, I could not find the
> error
> > > logs
> > > > > for activemq. I've also tried sudo ./activemq start which gives the
> > > same
> > > > > output.
> > > > >
> > > > > Regards,
> > > > > Kumaranath Fernando
> > > > >
> > > > >
> > > > >
> > > > > On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com>
> > > wrote:
> > > > >
> > > > >> Yes, I can. Kumaranath please can you resend the log file
> containing
> > > the
> > > > >> error you get. I cannt find it on your 1st mail.
> > > > >>
> > > > >> Thanks,
> > > > >> Courage
> > > > >>
> > > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com>
> > > wrote:
> > > > >>
> > > > >> > Hello Courage,
> > > > >> >
> > > > >> > Would you like to see if you can help here. I believe you have
> > been
> > > > >> > working on it on GSoC project.
> > > > >> >
> > > > >> > Regards
> > > > >> > Mohit
> > > > >> >
> > > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io>
> > > > wrote:
> > > > >> >
> > > > >> >> ha ha ...sorry ... thought you were talking about the new stuff
> > we
> > > > are
> > > > >> >> working on.
> > > > >> >>
> > > > >> >> Sadly I'm not the right person to answer the questions for the
> > > > current
> > > > >> >> version setup.
> > > > >> >>
> > > > >> >> Let somebody who knows about it jump in.
> > > > >> >>
> > > > >> >> Cheers
> > > > >> >>
> > > > >> >> Markus
> > > > >> >>
> > > > >> >> .::Yagni likes a DRY KISS::.
> > > > >> >>
> > > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> > > > >> >> kumaranathfernando@gmail.com> wrote:
> > > > >> >>
> > > > >> >> > Hi Markus!
> > > > >> >> >
> > > > >> >> > Thanks for your response.Not really clear on what you're
> trying
> > > > >> >> > express here*(I'm
> > > > >> >> > referring to Apache Fineract here and not Fineract CN)*.I was
> > > able
> > > > to
> > > > >> >> start
> > > > >> >> > up the server, using ./gradlew clean tomcatRunWar but it does
> > not
> > > > >> >> connect
> > > > >> >> > with the activemq since it's not started properly.
> > > > >> >> >
> > > > >> >> > I followed the instructions on
> > > > >> >> > http://activemq.apache.org/getting-started.html for unix,
> with
> > > > root
> > > > >> >> being
> > > > >> >> > the user, screenshot of error log attached above.
> > > > >> >> >
> > > > >> >> > Any help is appreciated!
> > > > >> >> >
> > > > >> >> > Regards,
> > > > >> >> > Kumaranath Fernando
> > > > >> >> >
> > > > >> >> >
> > > > >> >> >
> > > > >> >> >
> > > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> > > > >> markus.geiss@kuelap.io>
> > > > >> >> > wrote:
> > > > >> >> >
> > > > >> >> > > ok ... sounds like you are not using a centralized
> > > configuration
> > > > >> than
> > > > >> >> ...
> > > > >> >> > > so if you start the services with java -jar simply add the
> > > > >> following
> > > > >> >> > > before -jar
> > > > >> >> > >
> > > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> > > > >> >> > >
> > > > >> >> > > You need to add this to all services ...
> > > > >> >> > >
> > > > >> >> > > Cheers
> > > > >> >> > >
> > > > >> >> > > Markus
> > > > >> >> > >
> > > > >> >> > > .::Yagni likes a DRY KISS::.
> > > > >> >> > >
> > > > >> >> > >
> > > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> > > > >> >> > > kumaranathfernando@gmail.com> wrote:
> > > > >> >> > >
> > > > >> >> > > > Hi Markus!
> > > > >> >> > > >
> > > > >> >> > > > Thanks for your response.Where do I locate my
> > > application.yml?
> > > > >> >> > > >
> > > > >> >> > > > Regards,
> > > > >> >> > > > Kumaranath Fernando
> > > > >> >> > > >
> > > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> > > > >> >> markus.geiss@kuelap.io>
> > > > >> >> > > > wrote:
> > > > >> >> > > >
> > > > >> >> > > > > Hey Kumaranath,
> > > > >> >> > > > >
> > > > >> >> > > > > can you share your application.yml so we can check the
> > > > >> connection
> > > > >> >> > > > > parameters for ActiveMQ ...
> > > > >> >> > > > >
> > > > >> >> > > > > By default it will try to connect to
> > vm://localhost?broker.
> > > > >> >> > > > > persistent=false
> > > > >> >> > > > > an embedded version.
> > > > >> >> > > > >
> > > > >> >> > > > > Cheers
> > > > >> >> > > > >
> > > > >> >> > > > > Markus
> > > > >> >> > > > >
> > > > >> >> > > > > .::Yagni likes a DRY KISS::.
> > > > >> >> > > > >
> > > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> > > > >> >> > > > >
> > > > >> >> > > > > > Hi!
> > > > >> >> > > > > >
> > > > >> >> > > > > > I'm facing some difficulty when trying to startup the
> > > > >> ActiveMQ
> > > > >> >> > using
> > > > >> >> > > > the
> > > > >> >> > > > > > command
> > > > >> >> > > > > >
> > > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> > > > >> >> > > > > >
> > > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I
> was
> > > > >> >> accessing to
> > > > >> >> > > > setup
> > > > >> >> > > > > > Fineract.Attached is a screenshot after executing the
> > > > >> >> > command.Though
> > > > >> >> > > it
> > > > >> >> > > > > > says "INFO: pidfile created". I'm still facing the
> > > > >> >> > > > "ConnectionException:
> > > > >> >> > > > > > Connection refused:" on fineract terminal.
> > > > >> >> > > > > >
> > > > >> >> > > > > > Any help is appreciated!
> > > > >> >> > > > > >
> > > > >> >> > > > > > Regards,
> > > > >> >> > > > > > Kumaranath Fernando
> > > > >> >> > > > > >
> > > > >> >> > > > > >
> > > > >> >> > > > > >
> > > > >> >> > > > > >
> > > > >> >> > > > > >
> > > > >> >> > > > >
> > > > >> >> > > >
> > > > >> >> > >
> > > > >> >> >
> > > > >> >>
> > > > >> >
> > > > >>
> > > > >
> > > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Hi courage!
I've tried that already, it did not work, maybe there 's some special
configuration for ActiveMQ Linux?
I've followed the exact steps in
http://activemq.apache.org/getting-started.html though.
Regards,
Kumaranath Fernando
On Wed, Oct 11, 2017 at 8:37 PM, courage angeh <co...@gmail.com>
wrote:
> Can you log out as a root user and try again?
>
> On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi courage!
> >
> > It's already attached to this thread twice. You should be able to see it
> I
> > guess. Anyways, here's a link
> > <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28> to it.
> >
> > Regards,
> > Kumaranath Fernando
> >
> > On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <co...@gmail.com>
> > wrote:
> >
> > > Hi Fernando.
> > >
> > > Please can mail me your screenshot please?
> > >
> > > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> > > kumaranathfernando@gmail.com> wrote:
> > >
> > > > Hi Courage!
> > > >
> > > > It's a screenshot I have for the moment, I could not find the error
> > logs
> > > > for activemq. I've also tried sudo ./activemq start which gives the
> > same
> > > > output.
> > > >
> > > > Regards,
> > > > Kumaranath Fernando
> > > >
> > > >
> > > >
> > > > On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com>
> > wrote:
> > > >
> > > >> Yes, I can. Kumaranath please can you resend the log file containing
> > the
> > > >> error you get. I cannt find it on your 1st mail.
> > > >>
> > > >> Thanks,
> > > >> Courage
> > > >>
> > > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com>
> > wrote:
> > > >>
> > > >> > Hello Courage,
> > > >> >
> > > >> > Would you like to see if you can help here. I believe you have
> been
> > > >> > working on it on GSoC project.
> > > >> >
> > > >> > Regards
> > > >> > Mohit
> > > >> >
> > > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io>
> > > wrote:
> > > >> >
> > > >> >> ha ha ...sorry ... thought you were talking about the new stuff
> we
> > > are
> > > >> >> working on.
> > > >> >>
> > > >> >> Sadly I'm not the right person to answer the questions for the
> > > current
> > > >> >> version setup.
> > > >> >>
> > > >> >> Let somebody who knows about it jump in.
> > > >> >>
> > > >> >> Cheers
> > > >> >>
> > > >> >> Markus
> > > >> >>
> > > >> >> .::Yagni likes a DRY KISS::.
> > > >> >>
> > > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> > > >> >> kumaranathfernando@gmail.com> wrote:
> > > >> >>
> > > >> >> > Hi Markus!
> > > >> >> >
> > > >> >> > Thanks for your response.Not really clear on what you're trying
> > > >> >> > express here*(I'm
> > > >> >> > referring to Apache Fineract here and not Fineract CN)*.I was
> > able
> > > to
> > > >> >> start
> > > >> >> > up the server, using ./gradlew clean tomcatRunWar but it does
> not
> > > >> >> connect
> > > >> >> > with the activemq since it's not started properly.
> > > >> >> >
> > > >> >> > I followed the instructions on
> > > >> >> > http://activemq.apache.org/getting-started.html for unix, with
> > > root
> > > >> >> being
> > > >> >> > the user, screenshot of error log attached above.
> > > >> >> >
> > > >> >> > Any help is appreciated!
> > > >> >> >
> > > >> >> > Regards,
> > > >> >> > Kumaranath Fernando
> > > >> >> >
> > > >> >> >
> > > >> >> >
> > > >> >> >
> > > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> > > >> markus.geiss@kuelap.io>
> > > >> >> > wrote:
> > > >> >> >
> > > >> >> > > ok ... sounds like you are not using a centralized
> > configuration
> > > >> than
> > > >> >> ...
> > > >> >> > > so if you start the services with java -jar simply add the
> > > >> following
> > > >> >> > > before -jar
> > > >> >> > >
> > > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> > > >> >> > >
> > > >> >> > > You need to add this to all services ...
> > > >> >> > >
> > > >> >> > > Cheers
> > > >> >> > >
> > > >> >> > > Markus
> > > >> >> > >
> > > >> >> > > .::Yagni likes a DRY KISS::.
> > > >> >> > >
> > > >> >> > >
> > > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> > > >> >> > > kumaranathfernando@gmail.com> wrote:
> > > >> >> > >
> > > >> >> > > > Hi Markus!
> > > >> >> > > >
> > > >> >> > > > Thanks for your response.Where do I locate my
> > application.yml?
> > > >> >> > > >
> > > >> >> > > > Regards,
> > > >> >> > > > Kumaranath Fernando
> > > >> >> > > >
> > > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> > > >> >> markus.geiss@kuelap.io>
> > > >> >> > > > wrote:
> > > >> >> > > >
> > > >> >> > > > > Hey Kumaranath,
> > > >> >> > > > >
> > > >> >> > > > > can you share your application.yml so we can check the
> > > >> connection
> > > >> >> > > > > parameters for ActiveMQ ...
> > > >> >> > > > >
> > > >> >> > > > > By default it will try to connect to
> vm://localhost?broker.
> > > >> >> > > > > persistent=false
> > > >> >> > > > > an embedded version.
> > > >> >> > > > >
> > > >> >> > > > > Cheers
> > > >> >> > > > >
> > > >> >> > > > > Markus
> > > >> >> > > > >
> > > >> >> > > > > .::Yagni likes a DRY KISS::.
> > > >> >> > > > >
> > > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> > > >> >> > > > >
> > > >> >> > > > > > Hi!
> > > >> >> > > > > >
> > > >> >> > > > > > I'm facing some difficulty when trying to startup the
> > > >> ActiveMQ
> > > >> >> > using
> > > >> >> > > > the
> > > >> >> > > > > > command
> > > >> >> > > > > >
> > > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> > > >> >> > > > > >
> > > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
> > > >> >> accessing to
> > > >> >> > > > setup
> > > >> >> > > > > > Fineract.Attached is a screenshot after executing the
> > > >> >> > command.Though
> > > >> >> > > it
> > > >> >> > > > > > says "INFO: pidfile created". I'm still facing the
> > > >> >> > > > "ConnectionException:
> > > >> >> > > > > > Connection refused:" on fineract terminal.
> > > >> >> > > > > >
> > > >> >> > > > > > Any help is appreciated!
> > > >> >> > > > > >
> > > >> >> > > > > > Regards,
> > > >> >> > > > > > Kumaranath Fernando
> > > >> >> > > > > >
> > > >> >> > > > > >
> > > >> >> > > > > >
> > > >> >> > > > > >
> > > >> >> > > > > >
> > > >> >> > > > >
> > > >> >> > > >
> > > >> >> > >
> > > >> >> >
> > > >> >>
> > > >> >
> > > >>
> > > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by courage angeh <co...@gmail.com>.
Can you log out as a root user and try again?
On Wed, Oct 11, 2017 at 4:02 PM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi courage!
>
> It's already attached to this thread twice. You should be able to see it I
> guess. Anyways, here's a link
> <https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28> to it.
>
> Regards,
> Kumaranath Fernando
>
> On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <co...@gmail.com>
> wrote:
>
> > Hi Fernando.
> >
> > Please can mail me your screenshot please?
> >
> > On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> > kumaranathfernando@gmail.com> wrote:
> >
> > > Hi Courage!
> > >
> > > It's a screenshot I have for the moment, I could not find the error
> logs
> > > for activemq. I've also tried sudo ./activemq start which gives the
> same
> > > output.
> > >
> > > Regards,
> > > Kumaranath Fernando
> > >
> > >
> > >
> > > On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com>
> wrote:
> > >
> > >> Yes, I can. Kumaranath please can you resend the log file containing
> the
> > >> error you get. I cannt find it on your 1st mail.
> > >>
> > >> Thanks,
> > >> Courage
> > >>
> > >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com>
> wrote:
> > >>
> > >> > Hello Courage,
> > >> >
> > >> > Would you like to see if you can help here. I believe you have been
> > >> > working on it on GSoC project.
> > >> >
> > >> > Regards
> > >> > Mohit
> > >> >
> > >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io>
> > wrote:
> > >> >
> > >> >> ha ha ...sorry ... thought you were talking about the new stuff we
> > are
> > >> >> working on.
> > >> >>
> > >> >> Sadly I'm not the right person to answer the questions for the
> > current
> > >> >> version setup.
> > >> >>
> > >> >> Let somebody who knows about it jump in.
> > >> >>
> > >> >> Cheers
> > >> >>
> > >> >> Markus
> > >> >>
> > >> >> .::Yagni likes a DRY KISS::.
> > >> >>
> > >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> > >> >> kumaranathfernando@gmail.com> wrote:
> > >> >>
> > >> >> > Hi Markus!
> > >> >> >
> > >> >> > Thanks for your response.Not really clear on what you're trying
> > >> >> > express here*(I'm
> > >> >> > referring to Apache Fineract here and not Fineract CN)*.I was
> able
> > to
> > >> >> start
> > >> >> > up the server, using ./gradlew clean tomcatRunWar but it does not
> > >> >> connect
> > >> >> > with the activemq since it's not started properly.
> > >> >> >
> > >> >> > I followed the instructions on
> > >> >> > http://activemq.apache.org/getting-started.html for unix, with
> > root
> > >> >> being
> > >> >> > the user, screenshot of error log attached above.
> > >> >> >
> > >> >> > Any help is appreciated!
> > >> >> >
> > >> >> > Regards,
> > >> >> > Kumaranath Fernando
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> > >> markus.geiss@kuelap.io>
> > >> >> > wrote:
> > >> >> >
> > >> >> > > ok ... sounds like you are not using a centralized
> configuration
> > >> than
> > >> >> ...
> > >> >> > > so if you start the services with java -jar simply add the
> > >> following
> > >> >> > > before -jar
> > >> >> > >
> > >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> > >> >> > >
> > >> >> > > You need to add this to all services ...
> > >> >> > >
> > >> >> > > Cheers
> > >> >> > >
> > >> >> > > Markus
> > >> >> > >
> > >> >> > > .::Yagni likes a DRY KISS::.
> > >> >> > >
> > >> >> > >
> > >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> > >> >> > > kumaranathfernando@gmail.com> wrote:
> > >> >> > >
> > >> >> > > > Hi Markus!
> > >> >> > > >
> > >> >> > > > Thanks for your response.Where do I locate my
> application.yml?
> > >> >> > > >
> > >> >> > > > Regards,
> > >> >> > > > Kumaranath Fernando
> > >> >> > > >
> > >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> > >> >> markus.geiss@kuelap.io>
> > >> >> > > > wrote:
> > >> >> > > >
> > >> >> > > > > Hey Kumaranath,
> > >> >> > > > >
> > >> >> > > > > can you share your application.yml so we can check the
> > >> connection
> > >> >> > > > > parameters for ActiveMQ ...
> > >> >> > > > >
> > >> >> > > > > By default it will try to connect to vm://localhost?broker.
> > >> >> > > > > persistent=false
> > >> >> > > > > an embedded version.
> > >> >> > > > >
> > >> >> > > > > Cheers
> > >> >> > > > >
> > >> >> > > > > Markus
> > >> >> > > > >
> > >> >> > > > > .::Yagni likes a DRY KISS::.
> > >> >> > > > >
> > >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > >> >> > > > > kumaranathfernando@gmail.com> wrote:
> > >> >> > > > >
> > >> >> > > > > > Hi!
> > >> >> > > > > >
> > >> >> > > > > > I'm facing some difficulty when trying to startup the
> > >> ActiveMQ
> > >> >> > using
> > >> >> > > > the
> > >> >> > > > > > command
> > >> >> > > > > >
> > >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> > >> >> > > > > >
> > >> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
> > >> >> accessing to
> > >> >> > > > setup
> > >> >> > > > > > Fineract.Attached is a screenshot after executing the
> > >> >> > command.Though
> > >> >> > > it
> > >> >> > > > > > says "INFO: pidfile created". I'm still facing the
> > >> >> > > > "ConnectionException:
> > >> >> > > > > > Connection refused:" on fineract terminal.
> > >> >> > > > > >
> > >> >> > > > > > Any help is appreciated!
> > >> >> > > > > >
> > >> >> > > > > > Regards,
> > >> >> > > > > > Kumaranath Fernando
> > >> >> > > > > >
> > >> >> > > > > >
> > >> >> > > > > >
> > >> >> > > > > >
> > >> >> > > > > >
> > >> >> > > > >
> > >> >> > > >
> > >> >> > >
> > >> >> >
> > >> >>
> > >> >
> > >>
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Hi courage!
It's already attached to this thread twice. You should be able to see it I
guess. Anyways, here's a link
<https://drive.google.com/open?id=0B3zd1JJxkP00R0dabVFQamQ1X28> to it.
Regards,
Kumaranath Fernando
On Wed, Oct 11, 2017 at 8:26 PM, courage angeh <co...@gmail.com>
wrote:
> Hi Fernando.
>
> Please can mail me your screenshot please?
>
> On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi Courage!
> >
> > It's a screenshot I have for the moment, I could not find the error logs
> > for activemq. I've also tried sudo ./activemq start which gives the same
> > output.
> >
> > Regards,
> > Kumaranath Fernando
> >
> >
> >
> > On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com> wrote:
> >
> >> Yes, I can. Kumaranath please can you resend the log file containing the
> >> error you get. I cannt find it on your 1st mail.
> >>
> >> Thanks,
> >> Courage
> >>
> >> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com> wrote:
> >>
> >> > Hello Courage,
> >> >
> >> > Would you like to see if you can help here. I believe you have been
> >> > working on it on GSoC project.
> >> >
> >> > Regards
> >> > Mohit
> >> >
> >> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io>
> wrote:
> >> >
> >> >> ha ha ...sorry ... thought you were talking about the new stuff we
> are
> >> >> working on.
> >> >>
> >> >> Sadly I'm not the right person to answer the questions for the
> current
> >> >> version setup.
> >> >>
> >> >> Let somebody who knows about it jump in.
> >> >>
> >> >> Cheers
> >> >>
> >> >> Markus
> >> >>
> >> >> .::Yagni likes a DRY KISS::.
> >> >>
> >> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> >> >> kumaranathfernando@gmail.com> wrote:
> >> >>
> >> >> > Hi Markus!
> >> >> >
> >> >> > Thanks for your response.Not really clear on what you're trying
> >> >> > express here*(I'm
> >> >> > referring to Apache Fineract here and not Fineract CN)*.I was able
> to
> >> >> start
> >> >> > up the server, using ./gradlew clean tomcatRunWar but it does not
> >> >> connect
> >> >> > with the activemq since it's not started properly.
> >> >> >
> >> >> > I followed the instructions on
> >> >> > http://activemq.apache.org/getting-started.html for unix, with
> root
> >> >> being
> >> >> > the user, screenshot of error log attached above.
> >> >> >
> >> >> > Any help is appreciated!
> >> >> >
> >> >> > Regards,
> >> >> > Kumaranath Fernando
> >> >> >
> >> >> >
> >> >> >
> >> >> >
> >> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
> >> markus.geiss@kuelap.io>
> >> >> > wrote:
> >> >> >
> >> >> > > ok ... sounds like you are not using a centralized configuration
> >> than
> >> >> ...
> >> >> > > so if you start the services with java -jar simply add the
> >> following
> >> >> > > before -jar
> >> >> > >
> >> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> >> >> > >
> >> >> > > You need to add this to all services ...
> >> >> > >
> >> >> > > Cheers
> >> >> > >
> >> >> > > Markus
> >> >> > >
> >> >> > > .::Yagni likes a DRY KISS::.
> >> >> > >
> >> >> > >
> >> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> >> >> > > kumaranathfernando@gmail.com> wrote:
> >> >> > >
> >> >> > > > Hi Markus!
> >> >> > > >
> >> >> > > > Thanks for your response.Where do I locate my application.yml?
> >> >> > > >
> >> >> > > > Regards,
> >> >> > > > Kumaranath Fernando
> >> >> > > >
> >> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> >> >> markus.geiss@kuelap.io>
> >> >> > > > wrote:
> >> >> > > >
> >> >> > > > > Hey Kumaranath,
> >> >> > > > >
> >> >> > > > > can you share your application.yml so we can check the
> >> connection
> >> >> > > > > parameters for ActiveMQ ...
> >> >> > > > >
> >> >> > > > > By default it will try to connect to vm://localhost?broker.
> >> >> > > > > persistent=false
> >> >> > > > > an embedded version.
> >> >> > > > >
> >> >> > > > > Cheers
> >> >> > > > >
> >> >> > > > > Markus
> >> >> > > > >
> >> >> > > > > .::Yagni likes a DRY KISS::.
> >> >> > > > >
> >> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> >> >> > > > > kumaranathfernando@gmail.com> wrote:
> >> >> > > > >
> >> >> > > > > > Hi!
> >> >> > > > > >
> >> >> > > > > > I'm facing some difficulty when trying to startup the
> >> ActiveMQ
> >> >> > using
> >> >> > > > the
> >> >> > > > > > command
> >> >> > > > > >
> >> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> >> >> > > > > >
> >> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
> >> >> accessing to
> >> >> > > > setup
> >> >> > > > > > Fineract.Attached is a screenshot after executing the
> >> >> > command.Though
> >> >> > > it
> >> >> > > > > > says "INFO: pidfile created". I'm still facing the
> >> >> > > > "ConnectionException:
> >> >> > > > > > Connection refused:" on fineract terminal.
> >> >> > > > > >
> >> >> > > > > > Any help is appreciated!
> >> >> > > > > >
> >> >> > > > > > Regards,
> >> >> > > > > > Kumaranath Fernando
> >> >> > > > > >
> >> >> > > > > >
> >> >> > > > > >
> >> >> > > > > >
> >> >> > > > > >
> >> >> > > > >
> >> >> > > >
> >> >> > >
> >> >> >
> >> >>
> >> >
> >>
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by courage angeh <co...@gmail.com>.
Hi Fernando.
Please can mail me your screenshot please?
On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi Courage!
>
> It's a screenshot I have for the moment, I could not find the error logs
> for activemq. I've also tried sudo ./activemq start which gives the same
> output.
>
> Regards,
> Kumaranath Fernando
>
>
>
> On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com> wrote:
>
>> Yes, I can. Kumaranath please can you resend the log file containing the
>> error you get. I cannt find it on your 1st mail.
>>
>> Thanks,
>> Courage
>>
>> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com> wrote:
>>
>> > Hello Courage,
>> >
>> > Would you like to see if you can help here. I believe you have been
>> > working on it on GSoC project.
>> >
>> > Regards
>> > Mohit
>> >
>> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io> wrote:
>> >
>> >> ha ha ...sorry ... thought you were talking about the new stuff we are
>> >> working on.
>> >>
>> >> Sadly I'm not the right person to answer the questions for the current
>> >> version setup.
>> >>
>> >> Let somebody who knows about it jump in.
>> >>
>> >> Cheers
>> >>
>> >> Markus
>> >>
>> >> .::Yagni likes a DRY KISS::.
>> >>
>> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
>> >> kumaranathfernando@gmail.com> wrote:
>> >>
>> >> > Hi Markus!
>> >> >
>> >> > Thanks for your response.Not really clear on what you're trying
>> >> > express here*(I'm
>> >> > referring to Apache Fineract here and not Fineract CN)*.I was able to
>> >> start
>> >> > up the server, using ./gradlew clean tomcatRunWar but it does not
>> >> connect
>> >> > with the activemq since it's not started properly.
>> >> >
>> >> > I followed the instructions on
>> >> > http://activemq.apache.org/getting-started.html for unix, with root
>> >> being
>> >> > the user, screenshot of error log attached above.
>> >> >
>> >> > Any help is appreciated!
>> >> >
>> >> > Regards,
>> >> > Kumaranath Fernando
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
>> markus.geiss@kuelap.io>
>> >> > wrote:
>> >> >
>> >> > > ok ... sounds like you are not using a centralized configuration
>> than
>> >> ...
>> >> > > so if you start the services with java -jar simply add the
>> following
>> >> > > before -jar
>> >> > >
>> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
>> >> > >
>> >> > > You need to add this to all services ...
>> >> > >
>> >> > > Cheers
>> >> > >
>> >> > > Markus
>> >> > >
>> >> > > .::Yagni likes a DRY KISS::.
>> >> > >
>> >> > >
>> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
>> >> > > kumaranathfernando@gmail.com> wrote:
>> >> > >
>> >> > > > Hi Markus!
>> >> > > >
>> >> > > > Thanks for your response.Where do I locate my application.yml?
>> >> > > >
>> >> > > > Regards,
>> >> > > > Kumaranath Fernando
>> >> > > >
>> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
>> >> markus.geiss@kuelap.io>
>> >> > > > wrote:
>> >> > > >
>> >> > > > > Hey Kumaranath,
>> >> > > > >
>> >> > > > > can you share your application.yml so we can check the
>> connection
>> >> > > > > parameters for ActiveMQ ...
>> >> > > > >
>> >> > > > > By default it will try to connect to vm://localhost?broker.
>> >> > > > > persistent=false
>> >> > > > > an embedded version.
>> >> > > > >
>> >> > > > > Cheers
>> >> > > > >
>> >> > > > > Markus
>> >> > > > >
>> >> > > > > .::Yagni likes a DRY KISS::.
>> >> > > > >
>> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
>> >> > > > > kumaranathfernando@gmail.com> wrote:
>> >> > > > >
>> >> > > > > > Hi!
>> >> > > > > >
>> >> > > > > > I'm facing some difficulty when trying to startup the
>> ActiveMQ
>> >> > using
>> >> > > > the
>> >> > > > > > command
>> >> > > > > >
>> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
>> >> > > > > >
>> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
>> >> accessing to
>> >> > > > setup
>> >> > > > > > Fineract.Attached is a screenshot after executing the
>> >> > command.Though
>> >> > > it
>> >> > > > > > says "INFO: pidfile created". I'm still facing the
>> >> > > > "ConnectionException:
>> >> > > > > > Connection refused:" on fineract terminal.
>> >> > > > > >
>> >> > > > > > Any help is appreciated!
>> >> > > > > >
>> >> > > > > > Regards,
>> >> > > > > > Kumaranath Fernando
>> >> > > > > >
>> >> > > > > >
>> >> > > > > >
>> >> > > > > >
>> >> > > > > >
>> >> > > > >
>> >> > > >
>> >> > >
>> >> >
>> >>
>> >
>>
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Awasum Yannick <ya...@gmail.com>.
Hi Courage,
Could you please have a call with Fernando and see what is going on...
Issue could be port number already in use or another system ActiveMQ
already running to dependency not satisfied.
Also check that you are accessing the right port number on the browser.
Thanks.
On Wed, Oct 11, 2017 at 10:04 AM, Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi Courage!
>
> It's a screenshot I have for the moment, I could not find the error logs
> for activemq. I've also tried sudo ./activemq start which gives the same
> output.
>
> Regards,
> Kumaranath Fernando
>
>
>
> On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com> wrote:
>
>> Yes, I can. Kumaranath please can you resend the log file containing the
>> error you get. I cannt find it on your 1st mail.
>>
>> Thanks,
>> Courage
>>
>> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com> wrote:
>>
>> > Hello Courage,
>> >
>> > Would you like to see if you can help here. I believe you have been
>> > working on it on GSoC project.
>> >
>> > Regards
>> > Mohit
>> >
>> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io> wrote:
>> >
>> >> ha ha ...sorry ... thought you were talking about the new stuff we are
>> >> working on.
>> >>
>> >> Sadly I'm not the right person to answer the questions for the current
>> >> version setup.
>> >>
>> >> Let somebody who knows about it jump in.
>> >>
>> >> Cheers
>> >>
>> >> Markus
>> >>
>> >> .::Yagni likes a DRY KISS::.
>> >>
>> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
>> >> kumaranathfernando@gmail.com> wrote:
>> >>
>> >> > Hi Markus!
>> >> >
>> >> > Thanks for your response.Not really clear on what you're trying
>> >> > express here*(I'm
>> >> > referring to Apache Fineract here and not Fineract CN)*.I was able to
>> >> start
>> >> > up the server, using ./gradlew clean tomcatRunWar but it does not
>> >> connect
>> >> > with the activemq since it's not started properly.
>> >> >
>> >> > I followed the instructions on
>> >> > http://activemq.apache.org/getting-started.html for unix, with root
>> >> being
>> >> > the user, screenshot of error log attached above.
>> >> >
>> >> > Any help is appreciated!
>> >> >
>> >> > Regards,
>> >> > Kumaranath Fernando
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <
>> markus.geiss@kuelap.io>
>> >> > wrote:
>> >> >
>> >> > > ok ... sounds like you are not using a centralized configuration
>> than
>> >> ...
>> >> > > so if you start the services with java -jar simply add the
>> following
>> >> > > before -jar
>> >> > >
>> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
>> >> > >
>> >> > > You need to add this to all services ...
>> >> > >
>> >> > > Cheers
>> >> > >
>> >> > > Markus
>> >> > >
>> >> > > .::Yagni likes a DRY KISS::.
>> >> > >
>> >> > >
>> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
>> >> > > kumaranathfernando@gmail.com> wrote:
>> >> > >
>> >> > > > Hi Markus!
>> >> > > >
>> >> > > > Thanks for your response.Where do I locate my application.yml?
>> >> > > >
>> >> > > > Regards,
>> >> > > > Kumaranath Fernando
>> >> > > >
>> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
>> >> markus.geiss@kuelap.io>
>> >> > > > wrote:
>> >> > > >
>> >> > > > > Hey Kumaranath,
>> >> > > > >
>> >> > > > > can you share your application.yml so we can check the
>> connection
>> >> > > > > parameters for ActiveMQ ...
>> >> > > > >
>> >> > > > > By default it will try to connect to vm://localhost?broker.
>> >> > > > > persistent=false
>> >> > > > > an embedded version.
>> >> > > > >
>> >> > > > > Cheers
>> >> > > > >
>> >> > > > > Markus
>> >> > > > >
>> >> > > > > .::Yagni likes a DRY KISS::.
>> >> > > > >
>> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
>> >> > > > > kumaranathfernando@gmail.com> wrote:
>> >> > > > >
>> >> > > > > > Hi!
>> >> > > > > >
>> >> > > > > > I'm facing some difficulty when trying to startup the
>> ActiveMQ
>> >> > using
>> >> > > > the
>> >> > > > > > command
>> >> > > > > >
>> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
>> >> > > > > >
>> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
>> >> accessing to
>> >> > > > setup
>> >> > > > > > Fineract.Attached is a screenshot after executing the
>> >> > command.Though
>> >> > > it
>> >> > > > > > says "INFO: pidfile created". I'm still facing the
>> >> > > > "ConnectionException:
>> >> > > > > > Connection refused:" on fineract terminal.
>> >> > > > > >
>> >> > > > > > Any help is appreciated!
>> >> > > > > >
>> >> > > > > > Regards,
>> >> > > > > > Kumaranath Fernando
>> >> > > > > >
>> >> > > > > >
>> >> > > > > >
>> >> > > > > >
>> >> > > > > >
>> >> > > > >
>> >> > > >
>> >> > >
>> >> >
>> >>
>> >
>>
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Hi Courage!
It's a screenshot I have for the moment, I could not find the error logs
for activemq. I've also tried sudo ./activemq start which gives the same
output.
Regards,
Kumaranath Fernando
On 11 Oct 2017 2:13 pm, "courage angeh" <co...@gmail.com> wrote:
> Yes, I can. Kumaranath please can you resend the log file containing the
> error you get. I cannt find it on your 1st mail.
>
> Thanks,
> Courage
>
> On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com> wrote:
>
> > Hello Courage,
> >
> > Would you like to see if you can help here. I believe you have been
> > working on it on GSoC project.
> >
> > Regards
> > Mohit
> >
> > On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io> wrote:
> >
> >> ha ha ...sorry ... thought you were talking about the new stuff we are
> >> working on.
> >>
> >> Sadly I'm not the right person to answer the questions for the current
> >> version setup.
> >>
> >> Let somebody who knows about it jump in.
> >>
> >> Cheers
> >>
> >> Markus
> >>
> >> .::Yagni likes a DRY KISS::.
> >>
> >> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> >> kumaranathfernando@gmail.com> wrote:
> >>
> >> > Hi Markus!
> >> >
> >> > Thanks for your response.Not really clear on what you're trying
> >> > express here*(I'm
> >> > referring to Apache Fineract here and not Fineract CN)*.I was able to
> >> start
> >> > up the server, using ./gradlew clean tomcatRunWar but it does not
> >> connect
> >> > with the activemq since it's not started properly.
> >> >
> >> > I followed the instructions on
> >> > http://activemq.apache.org/getting-started.html for unix, with root
> >> being
> >> > the user, screenshot of error log attached above.
> >> >
> >> > Any help is appreciated!
> >> >
> >> > Regards,
> >> > Kumaranath Fernando
> >> >
> >> >
> >> >
> >> >
> >> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <markus.geiss@kuelap.io
> >
> >> > wrote:
> >> >
> >> > > ok ... sounds like you are not using a centralized configuration
> than
> >> ...
> >> > > so if you start the services with java -jar simply add the
> following
> >> > > before -jar
> >> > >
> >> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> >> > >
> >> > > You need to add this to all services ...
> >> > >
> >> > > Cheers
> >> > >
> >> > > Markus
> >> > >
> >> > > .::Yagni likes a DRY KISS::.
> >> > >
> >> > >
> >> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> >> > > kumaranathfernando@gmail.com> wrote:
> >> > >
> >> > > > Hi Markus!
> >> > > >
> >> > > > Thanks for your response.Where do I locate my application.yml?
> >> > > >
> >> > > > Regards,
> >> > > > Kumaranath Fernando
> >> > > >
> >> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> >> markus.geiss@kuelap.io>
> >> > > > wrote:
> >> > > >
> >> > > > > Hey Kumaranath,
> >> > > > >
> >> > > > > can you share your application.yml so we can check the
> connection
> >> > > > > parameters for ActiveMQ ...
> >> > > > >
> >> > > > > By default it will try to connect to vm://localhost?broker.
> >> > > > > persistent=false
> >> > > > > an embedded version.
> >> > > > >
> >> > > > > Cheers
> >> > > > >
> >> > > > > Markus
> >> > > > >
> >> > > > > .::Yagni likes a DRY KISS::.
> >> > > > >
> >> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> >> > > > > kumaranathfernando@gmail.com> wrote:
> >> > > > >
> >> > > > > > Hi!
> >> > > > > >
> >> > > > > > I'm facing some difficulty when trying to startup the ActiveMQ
> >> > using
> >> > > > the
> >> > > > > > command
> >> > > > > >
> >> > > > > > cd [activemq_install_dir]/bin ./activemq start
> >> > > > > >
> >> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
> >> accessing to
> >> > > > setup
> >> > > > > > Fineract.Attached is a screenshot after executing the
> >> > command.Though
> >> > > it
> >> > > > > > says "INFO: pidfile created". I'm still facing the
> >> > > > "ConnectionException:
> >> > > > > > Connection refused:" on fineract terminal.
> >> > > > > >
> >> > > > > > Any help is appreciated!
> >> > > > > >
> >> > > > > > Regards,
> >> > > > > > Kumaranath Fernando
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by courage angeh <co...@gmail.com>.
Yes, I can. Kumaranath please can you resend the log file containing the
error you get. I cannt find it on your 1st mail.
Thanks,
Courage
On Oct 11, 2017 9:15 AM, "Mohit Bajoria" <mo...@gmail.com> wrote:
> Hello Courage,
>
> Would you like to see if you can help here. I believe you have been
> working on it on GSoC project.
>
> Regards
> Mohit
>
> On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io> wrote:
>
>> ha ha ...sorry ... thought you were talking about the new stuff we are
>> working on.
>>
>> Sadly I'm not the right person to answer the questions for the current
>> version setup.
>>
>> Let somebody who knows about it jump in.
>>
>> Cheers
>>
>> Markus
>>
>> .::Yagni likes a DRY KISS::.
>>
>> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
>> kumaranathfernando@gmail.com> wrote:
>>
>> > Hi Markus!
>> >
>> > Thanks for your response.Not really clear on what you're trying
>> > express here*(I'm
>> > referring to Apache Fineract here and not Fineract CN)*.I was able to
>> start
>> > up the server, using ./gradlew clean tomcatRunWar but it does not
>> connect
>> > with the activemq since it's not started properly.
>> >
>> > I followed the instructions on
>> > http://activemq.apache.org/getting-started.html for unix, with root
>> being
>> > the user, screenshot of error log attached above.
>> >
>> > Any help is appreciated!
>> >
>> > Regards,
>> > Kumaranath Fernando
>> >
>> >
>> >
>> >
>> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <ma...@kuelap.io>
>> > wrote:
>> >
>> > > ok ... sounds like you are not using a centralized configuration than
>> ...
>> > > so if you start the services with java -jar simply add the following
>> > > before -jar
>> > >
>> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
>> > >
>> > > You need to add this to all services ...
>> > >
>> > > Cheers
>> > >
>> > > Markus
>> > >
>> > > .::Yagni likes a DRY KISS::.
>> > >
>> > >
>> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
>> > > kumaranathfernando@gmail.com> wrote:
>> > >
>> > > > Hi Markus!
>> > > >
>> > > > Thanks for your response.Where do I locate my application.yml?
>> > > >
>> > > > Regards,
>> > > > Kumaranath Fernando
>> > > >
>> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
>> markus.geiss@kuelap.io>
>> > > > wrote:
>> > > >
>> > > > > Hey Kumaranath,
>> > > > >
>> > > > > can you share your application.yml so we can check the connection
>> > > > > parameters for ActiveMQ ...
>> > > > >
>> > > > > By default it will try to connect to vm://localhost?broker.
>> > > > > persistent=false
>> > > > > an embedded version.
>> > > > >
>> > > > > Cheers
>> > > > >
>> > > > > Markus
>> > > > >
>> > > > > .::Yagni likes a DRY KISS::.
>> > > > >
>> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
>> > > > > kumaranathfernando@gmail.com> wrote:
>> > > > >
>> > > > > > Hi!
>> > > > > >
>> > > > > > I'm facing some difficulty when trying to startup the ActiveMQ
>> > using
>> > > > the
>> > > > > > command
>> > > > > >
>> > > > > > cd [activemq_install_dir]/bin ./activemq start
>> > > > > >
>> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was
>> accessing to
>> > > > setup
>> > > > > > Fineract.Attached is a screenshot after executing the
>> > command.Though
>> > > it
>> > > > > > says "INFO: pidfile created". I'm still facing the
>> > > > "ConnectionException:
>> > > > > > Connection refused:" on fineract terminal.
>> > > > > >
>> > > > > > Any help is appreciated!
>> > > > > >
>> > > > > > Regards,
>> > > > > > Kumaranath Fernando
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Mohit Bajoria <mo...@gmail.com>.
Hello Courage,
Would you like to see if you can help here. I believe you have been working
on it on GSoC project.
Regards
Mohit
On 11 Oct 2017 1:02 pm, "Markus Geiss" <ma...@kuelap.io> wrote:
> ha ha ...sorry ... thought you were talking about the new stuff we are
> working on.
>
> Sadly I'm not the right person to answer the questions for the current
> version setup.
>
> Let somebody who knows about it jump in.
>
> Cheers
>
> Markus
>
> .::Yagni likes a DRY KISS::.
>
> On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi Markus!
> >
> > Thanks for your response.Not really clear on what you're trying
> > express here*(I'm
> > referring to Apache Fineract here and not Fineract CN)*.I was able to
> start
> > up the server, using ./gradlew clean tomcatRunWar but it does not connect
> > with the activemq since it's not started properly.
> >
> > I followed the instructions on
> > http://activemq.apache.org/getting-started.html for unix, with root
> being
> > the user, screenshot of error log attached above.
> >
> > Any help is appreciated!
> >
> > Regards,
> > Kumaranath Fernando
> >
> >
> >
> >
> > On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <ma...@kuelap.io>
> > wrote:
> >
> > > ok ... sounds like you are not using a centralized configuration than
> ...
> > > so if you start the services with java -jar simply add the following
> > > before -jar
> > >
> > > -Dactivemq.brokerUrl=tcp://<your host>:61616
> > >
> > > You need to add this to all services ...
> > >
> > > Cheers
> > >
> > > Markus
> > >
> > > .::Yagni likes a DRY KISS::.
> > >
> > >
> > > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> > > kumaranathfernando@gmail.com> wrote:
> > >
> > > > Hi Markus!
> > > >
> > > > Thanks for your response.Where do I locate my application.yml?
> > > >
> > > > Regards,
> > > > Kumaranath Fernando
> > > >
> > > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <
> markus.geiss@kuelap.io>
> > > > wrote:
> > > >
> > > > > Hey Kumaranath,
> > > > >
> > > > > can you share your application.yml so we can check the connection
> > > > > parameters for ActiveMQ ...
> > > > >
> > > > > By default it will try to connect to vm://localhost?broker.
> > > > > persistent=false
> > > > > an embedded version.
> > > > >
> > > > > Cheers
> > > > >
> > > > > Markus
> > > > >
> > > > > .::Yagni likes a DRY KISS::.
> > > > >
> > > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > > > > kumaranathfernando@gmail.com> wrote:
> > > > >
> > > > > > Hi!
> > > > > >
> > > > > > I'm facing some difficulty when trying to startup the ActiveMQ
> > using
> > > > the
> > > > > > command
> > > > > >
> > > > > > cd [activemq_install_dir]/bin ./activemq start
> > > > > >
> > > > > > This was on a remote Ubuntu Server 14.04.5 which I was accessing
> to
> > > > setup
> > > > > > Fineract.Attached is a screenshot after executing the
> > command.Though
> > > it
> > > > > > says "INFO: pidfile created". I'm still facing the
> > > > "ConnectionException:
> > > > > > Connection refused:" on fineract terminal.
> > > > > >
> > > > > > Any help is appreciated!
> > > > > >
> > > > > > Regards,
> > > > > > Kumaranath Fernando
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Markus Geiss <ma...@kuelap.io>.
ha ha ...sorry ... thought you were talking about the new stuff we are
working on.
Sadly I'm not the right person to answer the questions for the current
version setup.
Let somebody who knows about it jump in.
Cheers
Markus
.::Yagni likes a DRY KISS::.
On Wed, Oct 11, 2017 at 7:16 AM Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi Markus!
>
> Thanks for your response.Not really clear on what you're trying
> express here*(I'm
> referring to Apache Fineract here and not Fineract CN)*.I was able to start
> up the server, using ./gradlew clean tomcatRunWar but it does not connect
> with the activemq since it's not started properly.
>
> I followed the instructions on
> http://activemq.apache.org/getting-started.html for unix, with root being
> the user, screenshot of error log attached above.
>
> Any help is appreciated!
>
> Regards,
> Kumaranath Fernando
>
>
>
>
> On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <ma...@kuelap.io>
> wrote:
>
> > ok ... sounds like you are not using a centralized configuration than ...
> > so if you start the services with java -jar simply add the following
> > before -jar
> >
> > -Dactivemq.brokerUrl=tcp://<your host>:61616
> >
> > You need to add this to all services ...
> >
> > Cheers
> >
> > Markus
> >
> > .::Yagni likes a DRY KISS::.
> >
> >
> > On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> > kumaranathfernando@gmail.com> wrote:
> >
> > > Hi Markus!
> > >
> > > Thanks for your response.Where do I locate my application.yml?
> > >
> > > Regards,
> > > Kumaranath Fernando
> > >
> > > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <ma...@kuelap.io>
> > > wrote:
> > >
> > > > Hey Kumaranath,
> > > >
> > > > can you share your application.yml so we can check the connection
> > > > parameters for ActiveMQ ...
> > > >
> > > > By default it will try to connect to vm://localhost?broker.
> > > > persistent=false
> > > > an embedded version.
> > > >
> > > > Cheers
> > > >
> > > > Markus
> > > >
> > > > .::Yagni likes a DRY KISS::.
> > > >
> > > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > > > kumaranathfernando@gmail.com> wrote:
> > > >
> > > > > Hi!
> > > > >
> > > > > I'm facing some difficulty when trying to startup the ActiveMQ
> using
> > > the
> > > > > command
> > > > >
> > > > > cd [activemq_install_dir]/bin ./activemq start
> > > > >
> > > > > This was on a remote Ubuntu Server 14.04.5 which I was accessing to
> > > setup
> > > > > Fineract.Attached is a screenshot after executing the
> command.Though
> > it
> > > > > says "INFO: pidfile created". I'm still facing the
> > > "ConnectionException:
> > > > > Connection refused:" on fineract terminal.
> > > > >
> > > > > Any help is appreciated!
> > > > >
> > > > > Regards,
> > > > > Kumaranath Fernando
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Hi Markus!
Thanks for your response.Not really clear on what you're trying
express here*(I'm
referring to Apache Fineract here and not Fineract CN)*.I was able to start
up the server, using ./gradlew clean tomcatRunWar but it does not connect
with the activemq since it's not started properly.
I followed the instructions on
http://activemq.apache.org/getting-started.html for unix, with root being
the user, screenshot of error log attached above.
Any help is appreciated!
Regards,
Kumaranath Fernando
On Tue, Oct 10, 2017 at 4:39 PM, Markus Geiss <ma...@kuelap.io>
wrote:
> ok ... sounds like you are not using a centralized configuration than ...
> so if you start the services with java -jar simply add the following
> before -jar
>
> -Dactivemq.brokerUrl=tcp://<your host>:61616
>
> You need to add this to all services ...
>
> Cheers
>
> Markus
>
> .::Yagni likes a DRY KISS::.
>
>
> On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi Markus!
> >
> > Thanks for your response.Where do I locate my application.yml?
> >
> > Regards,
> > Kumaranath Fernando
> >
> > On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <ma...@kuelap.io>
> > wrote:
> >
> > > Hey Kumaranath,
> > >
> > > can you share your application.yml so we can check the connection
> > > parameters for ActiveMQ ...
> > >
> > > By default it will try to connect to vm://localhost?broker.
> > > persistent=false
> > > an embedded version.
> > >
> > > Cheers
> > >
> > > Markus
> > >
> > > .::Yagni likes a DRY KISS::.
> > >
> > > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > > kumaranathfernando@gmail.com> wrote:
> > >
> > > > Hi!
> > > >
> > > > I'm facing some difficulty when trying to startup the ActiveMQ using
> > the
> > > > command
> > > >
> > > > cd [activemq_install_dir]/bin ./activemq start
> > > >
> > > > This was on a remote Ubuntu Server 14.04.5 which I was accessing to
> > setup
> > > > Fineract.Attached is a screenshot after executing the command.Though
> it
> > > > says "INFO: pidfile created". I'm still facing the
> > "ConnectionException:
> > > > Connection refused:" on fineract terminal.
> > > >
> > > > Any help is appreciated!
> > > >
> > > > Regards,
> > > > Kumaranath Fernando
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Markus Geiss <ma...@kuelap.io>.
ok ... sounds like you are not using a centralized configuration than ...
so if you start the services with java -jar simply add the following
before -jar
-Dactivemq.brokerUrl=tcp://<your host>:61616
You need to add this to all services ...
Cheers
Markus
.::Yagni likes a DRY KISS::.
On Tue, Oct 10, 2017 at 9:55 AM Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi Markus!
>
> Thanks for your response.Where do I locate my application.yml?
>
> Regards,
> Kumaranath Fernando
>
> On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <ma...@kuelap.io>
> wrote:
>
> > Hey Kumaranath,
> >
> > can you share your application.yml so we can check the connection
> > parameters for ActiveMQ ...
> >
> > By default it will try to connect to vm://localhost?broker.
> > persistent=false
> > an embedded version.
> >
> > Cheers
> >
> > Markus
> >
> > .::Yagni likes a DRY KISS::.
> >
> > On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> > kumaranathfernando@gmail.com> wrote:
> >
> > > Hi!
> > >
> > > I'm facing some difficulty when trying to startup the ActiveMQ using
> the
> > > command
> > >
> > > cd [activemq_install_dir]/bin ./activemq start
> > >
> > > This was on a remote Ubuntu Server 14.04.5 which I was accessing to
> setup
> > > Fineract.Attached is a screenshot after executing the command.Though it
> > > says "INFO: pidfile created". I'm still facing the
> "ConnectionException:
> > > Connection refused:" on fineract terminal.
> > >
> > > Any help is appreciated!
> > >
> > > Regards,
> > > Kumaranath Fernando
> > >
> > >
> > >
> > >
> > >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Kumaranath Fernando <ku...@gmail.com>.
Hi Markus!
Thanks for your response.Where do I locate my application.yml?
Regards,
Kumaranath Fernando
On Tue, Oct 10, 2017 at 1:07 PM, Markus Geiss <ma...@kuelap.io>
wrote:
> Hey Kumaranath,
>
> can you share your application.yml so we can check the connection
> parameters for ActiveMQ ...
>
> By default it will try to connect to vm://localhost?broker.
> persistent=false
> an embedded version.
>
> Cheers
>
> Markus
>
> .::Yagni likes a DRY KISS::.
>
> On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
> kumaranathfernando@gmail.com> wrote:
>
> > Hi!
> >
> > I'm facing some difficulty when trying to startup the ActiveMQ using the
> > command
> >
> > cd [activemq_install_dir]/bin ./activemq start
> >
> > This was on a remote Ubuntu Server 14.04.5 which I was accessing to setup
> > Fineract.Attached is a screenshot after executing the command.Though it
> > says "INFO: pidfile created". I'm still facing the "ConnectionException:
> > Connection refused:" on fineract terminal.
> >
> > Any help is appreciated!
> >
> > Regards,
> > Kumaranath Fernando
> >
> >
> >
> >
> >
>
Re: Unable to start activemq process on Ubuntu Server 14.04.5
Posted by Markus Geiss <ma...@kuelap.io>.
Hey Kumaranath,
can you share your application.yml so we can check the connection
parameters for ActiveMQ ...
By default it will try to connect to vm://localhost?broker.persistent=false
an embedded version.
Cheers
Markus
.::Yagni likes a DRY KISS::.
On Tue, Oct 10, 2017 at 8:53 AM Kumaranath Fernando <
kumaranathfernando@gmail.com> wrote:
> Hi!
>
> I'm facing some difficulty when trying to startup the ActiveMQ using the
> command
>
> cd [activemq_install_dir]/bin ./activemq start
>
> This was on a remote Ubuntu Server 14.04.5 which I was accessing to setup
> Fineract.Attached is a screenshot after executing the command.Though it
> says "INFO: pidfile created". I'm still facing the "ConnectionException:
> Connection refused:" on fineract terminal.
>
> Any help is appreciated!
>
> Regards,
> Kumaranath Fernando
>
>
>
>
>