You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@sdap.apache.org by GitBox <gi...@apache.org> on 2022/11/21 19:15:31 UTC
[GitHub] [incubator-sdap-nexus] RKuttruff opened a new pull request, #214: Build doc
RKuttruff opened a new pull request, #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214
Documentation for building the Docker images used by SDAP.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] ngachung commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
ngachung commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036419935
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
True, how about local/sdap-nexus-webapp to distinguish between pulling official image from docker hub?
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] RKuttruff commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
RKuttruff commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036417885
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
Though it would be a bit easier to use with the qs since you'd only have to change the repo instead of repo + image
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] RKuttruff commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
RKuttruff commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036422362
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
Or I can make it a variable in the quickstart
ie:
`export REPO=apache/sdap-` for official
vs
`export REPO=sdap/` for local
And then refer to the images with something like `${REPO}solr-cloud`
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] RKuttruff commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
RKuttruff commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036400851
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
Should I prefix all the images with `sdap-` as well?
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] ngachung commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
ngachung commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036413641
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
Maybe not since we're using sdap/ whereas in the apache official images we have apache/sdap-
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] ngachung commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
ngachung commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036278011
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
For consistency with public docker images, this should be named sdap/solr-cloud
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] ngachung merged pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
ngachung merged PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-sdap-nexus] RKuttruff commented on a diff in pull request #214: Build doc
Posted by GitBox <gi...@apache.org>.
RKuttruff commented on code in PR #214:
URL: https://github.com/apache/incubator-sdap-nexus/pull/214#discussion_r1036422362
##########
docs/build.rst:
##########
@@ -0,0 +1,133 @@
+.. _build:
+
+*****************
+How to Build the SDAP Docker Images
+*****************
+
+In this guide, we will go over how to build the docker images for the various components of SDAP.
+
+Prepare
+===========
+
+First, we must ensure we have Docker installed and running. For this guide, we used Docker Desktop version 4.12.0. Download Docker Desktop `here. <https://www.docker.com/products/docker-desktop/>`_
+
+Now we must download and extract the source code for NEXUS and the ingester.
+
+.. code-block:: bash
+
+ export NEXUS_DIR=~/sdap-build/nexus
+ export INGESTER_DIR=~/sdap-build/ingester
+
+ mkdir -p ${NEXUS_DIR}
+ mkdir -p ${INGESTER_DIR}
+
+We should also set variables for a consistent tag across all images. These should be consistent with the release versions we plan to build.
+
+.. code-block:: bash
+
+ export NEXUS_VERSION=1.0.0
+ export INGESTER_VERSION=1.0.0
+
+To build the necessary images, we will need to first download the latest releases for SDAP NEXUS and SDAP Ingester ((URL)). We will not need to download the SDAP Nexusproto release directly.
+
+Now we must extract the releases to their respective directories.
+
+.. note::
+
+ In the following code block, make sure the versions in the filenames correspond with the versions that were downloaded.
+
+.. code-block:: bash
+
+ tar xvf apache-sdap-ingester-${INGESTER_VERSION}-src.tar.gz -C ${INGESTER_DIR}
+ tar xvf apache-sdap-nexus-${NEXUS_VERSION}-src.tar.gz -C ${NEXUS_DIR}
+
+Build Ingester Components
+=========================
+
+There are two components to build: the Collection Manager & Granule Ingester.
+
+For both of these, we must first move to the ingester root directory.
+
+.. code-block:: bash
+
+ cd ${INGESTER_DIR}
+
+Build the Collection Manager
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f collection_manager/docker/Dockerfile -t sdap/collection-manager:${INGESTER_VERSION}
+
+Build the Granule Ingester
+-------
+
+From the ingester root directory, run:
+
+.. code-block:: bash
+
+ docker build . -f granule_ingester/docker/Dockerfile -t sdap/granule-ingester:${INGESTER_VERSION}
+
+Build the Solr & Webapp Components
+======
+
+For the remaining three components, we must now move to the nexus root directory.
+
+.. code-block:: bash
+
+ cd ${NEXUS_DIR}
+
+Build the Solr Image
+-------
+
+First we must move to the Solr Docker directory.
+
+.. code-block:: bash
+
+ cd docker/solr
+
+Now to build the image:
+
+.. code-block:: bash
+
+ docker build . -t sdap/solr:${NEXUS_VERSION}
Review Comment:
Or I can make it a variable in the quickstart
ie:
`export REPO=apache/sdap-` for official
vs
`export REPO=sdap/` for local
And then refer to the images with something like `${REPO}solr-cloud:${SOLR_VERSION }`
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: dev-unsubscribe@sdap.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org