You are viewing a plain text version of this content. The canonical link for it is here.
Posted to java-dev@axis.apache.org by "Deepal Jayasinghe (JIRA)" <ji...@apache.org> on 2007/06/29 21:04:04 UTC
[jira] Resolved: (AXIS2-2726) The service cannot be found for the
endpoint reference (EPR)
[ https://issues.apache.org/jira/browse/AXIS2-2726?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Deepal Jayasinghe resolved AXIS2-2726.
--------------------------------------
Resolution: Fixed
The issue is not there in the current code base , I test and I got the expected result
(I had to modify axis2.xml , since that has some errors)
<!--
/*
* Copyright 2001-2004 The Apache Software Foundation.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
-->
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment">true</parameter>
<parameter name="hotupdate">false</parameter>
<parameter name="enableMTOM">false</parameter>
<parameter name="enableSwA">false</parameter>
<!--Uncomment if you want to enable file caching for attachments -->
<!--parameter name="cacheAttachments">true</parameter>
<parameter name="attachmentDIR"></parameter>
<parameter name="sizeThreshold">4000</parameter-->
<!--This will give out the timout of the configuration contexts, in milliseconds-->
<parameter name="ConfigContextTimeoutInterval">30000</parameter>
<!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
<!--that behavior.-->
<parameter name="sendStacktraceDetailsWithFaults">false</parameter>
<!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
<!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
<parameter name="userName">admin</parameter>
<parameter name="password">axis2</parameter>
<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
<!--<parameter name="ServicesDirectory">services</parameter>-->
<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
<!--<parameter name="ModulesDirectory">modules</parameter>-->
<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
<!--root which can configured using the following contextRoot parameter-->
<parameter name="contextRoot">ITG/Exigen</parameter>
<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
<!--context path to proper Axis2 servlets-->
<parameter name="servicePath">Exigen/services</parameter>
<!--<parameter name="restPath">Exigen/rest</parameter>
--><!--==============================================================-->
<!-- Custom Deplyers -->
<!--==============================================================-->
<!--To have POJO (Service as only one class file , class can be annotated one or not)
support uncomment the following XML tag-->
<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".class" directory="pojo"/>-->
<!--To have POJO (Service as more than one class , so a jar file) support uncomment the following XML tag-->
<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".jar" directory="pojo"/>-->
<!-- Following parameter will completely disable REST handling in Axis2-->
<parameter name="disableREST" locked="true">false</parameter>
<!-- If you have a front end host which exposes this webservice using a different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
<!--any operation -->
<!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
</messageReceivers>
<!-- ================================================= -->
<!-- Message Formatter -->
<!-- ================================================= -->
<!--Following content type to message formatter mapping can be used to implement support for different message -->
<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageFormatters>
<messageFormatter contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
<messageFormatter contentType="multipart/form-data"
class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
<messageFormatter contentType="application/xml"
class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
</messageFormatters>
<!-- ================================================= -->
<!-- Message Builders -->
<!-- ================================================= -->
<!--Following content type to builder mapping can be used to implement support for different message -->
<!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
<messageBuilders>
<messageBuilder contentType="application/xml"
class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
<messageBuilder contentType="application/x-www-form-urlencoded"
class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
<messageBuilder contentType="multipart/form-data"
class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
</messageBuilders>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port">9080</parameter>
<!-- Here is the complete list of supported parameters (see example settings further below):
port: the port to listen on (default 6060)
hostname: if non-null, url prefix used in reply-to endpoint references (default null)
originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
requestTimeout: value in millis of time that requests can wait for data (default 20000)
requestTcpNoDelay: true to maximize performance and minimize latency (default true)
false to minimize bandwidth consumption by combining segments
requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
note that default queue never fills up: see HttpFactory
threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
note that no such threads can exist with default unbounded request queue
threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
-->
<parameter name="hostname">
http://localhost/</parameter>
<!-- <parameter name="originServer">My-Server/1.1</parameter> -->
<!-- <parameter name="requestTimeout">10000</parameter> -->
<!-- <parameter name="requestTcpNoDelay">false</parameter> -->
<!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
<!-- <parameter name="RequestMaxThreadPoolSize">100</parameter> -->
<!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
<!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
</transportReceiver>
<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
<parameter name="myTopicConnectionFactory">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
</parameter>
<parameter name="myQueueConnectionFactory">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
</parameter>
<parameter name="default">
<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
</parameter>
</transportReceiver>-->
<!-- ================================================= -->
<!-- Mail Transport Listener -->
<!-- This is a sample configuration. It assumes a mail server running in localhost.
Listener pops messages that comes to the email address red@localhost. Users
password is red. Listener connect to the server every 3000 milliseconds.
Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
-->
<!-- ================================================= -->
<!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
<parameter name="mail.pop3.host">localhost</parameter>
<parameter name="mail.pop3.user">red</parameter>
<parameter name="mail.store.protocol">pop3</parameter>
<parameter name="transport.mail.pop3.password">red</parameter>
<parameter name="transport.mail.replyToAddress">red@localhost</parameter>
<parameter name="transport.listener.interval">3000</parameter>
</transportReceiver>-->
<!--Uncomment if you want to have TCP transport support-->
<!--transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port">6060</parameter-->>
<!--If you want to give your own host address for EPR generation-->
<!--uncomment the following paramter , and set it as you required.-->
<!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
<!-- /transportReceiver -->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender"/>
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
<!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
<!-- <parameter name="OmitSOAP12Action">true</parameter> -->
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding">chunked</parameter>
</transportSender>
<!--<transportSender name="jms"-->
<!--class="org.apache.axis2.transport.jms.JMSSender"/>-->
<!-- ================================================= -->
<!-- Mail Transport Sender -->
<!--Only need to uncomment the sender. Configuration is achieved with every client.
At any instant mail host should be given. Sample configuration has been given.
http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
-->
<!-- ================================================= -->
<!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
<parameter name="mail.smtp.host">localhost</parameter>
</transportSender>-->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<!--<module ref="addressing"/>
--><!--Configuring module , providing parameters for modules whether they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Clustering -->
<!-- ================================================= -->
<!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
<!--
<cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
<parameter name="param1">value1</parameter>
<configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager">
<listeners>
</listeners>
</configurationManager>
<contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager">
<listeners>
</listeners>
</contextManager>
</cluster>
-->
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="InFlow">
<!-- System predefined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Transport"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Transport"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.engine.RequestURIOperationDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="Dispatch"/>
</handler>
</phase>
<!-- System predefined phases -->
<!-- After Postdispatch phase module author or service author can add any phase he want -->
<phase name="OperationInPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
<phaseOrder type="InFaultFlow">
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.engine.RequestURIOperationDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFaultFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutFaultPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
</axisconfig>
> The service cannot be found for the endpoint reference (EPR)
> ------------------------------------------------------------
>
> Key: AXIS2-2726
> URL: https://issues.apache.org/jira/browse/AXIS2-2726
> Project: Axis 2.0 (Axis2)
> Issue Type: Bug
> Environment: RAD 7.0 WAS 6.1 Axis2.1.2
> Reporter: Bhagya Kitty
> Assignee: Deepal Jayasinghe
> Priority: Blocker
> Fix For: 1.3
>
>
> I am having problem while listing the webservice.
> this is the error
> This XML file does not appear to have any style information associated with it. The document tree is shown below.
> <soapenv:Reason>
> -
> <soapenv:Text xml:lang="en-US">
> The service cannot be found for the endpoint reference (EPR) /ITG/Exigen/services
> </soapenv:Text>
> </soapenv:Reason>
> web.xml
> <?xml version="1.0" encoding="UTF-8" ?>
> <web-app id="WebApp" version="2.4"
> xmlns="http://java.sun.com/xml/ns/j2ee"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
> <display-name>WS_Provider</display-name>
> <context-param>
> <param-name>axis2.xml.path</param-name>
> <param-value>/WEB-INF/conf/axis2.xml</param-value>
> </context-param>
> <context-param>
> <param-name>axis2.repository.path</param-name>
> <param-value>/WEB-INF/repository</param-value>
> </context-param>
> <servlet>
> <servlet-name>StartupServlet</servlet-name>
> <servlet-class>
> com.aigt.wins.servlet.StartupServlet
> </servlet-class>
> <load-on-startup>-1</load-on-startup>
> </servlet>
> <servlet>
> <servlet-name>AxisServlet</servlet-name>
> <servlet-class>
> org.apache.axis2.transport.http.AxisServlet
> </servlet-class>
> <load-on-startup>1</load-on-startup>
> </servlet>
> <servlet>
> <servlet-name>AxisAdminServlet</servlet-name>
> <servlet-class>
> org.apache.axis2.transport.http.AxisAdminServlet
> </servlet-class>
> </servlet>
> <servlet-mapping>
> <servlet-name>AxisServlet</servlet-name>
> <url-pattern>/servlet/AxisServlet</url-pattern>
> </servlet-mapping>
> <servlet-mapping>
> <servlet-name>AxisServlet</servlet-name>
> <url-pattern>*.jws</url-pattern>
> </servlet-mapping>
> <servlet-mapping>
> <servlet-name>AxisServlet</servlet-name>
> <url-pattern>/services/*</url-pattern>
> </servlet-mapping>
> <servlet-mapping>
> <servlet-name>StartupServlet</servlet-name>
> <url-pattern>/StartupServlet/*</url-pattern>
> </servlet-mapping>
> <servlet-mapping>
> <servlet-name>AxisAdminServlet</servlet-name>
> <url-pattern>/AxisAdminServlet</url-pattern>
> </servlet-mapping>
> <servlet-mapping>
> <servlet-name>AxisAdminServlet</servlet-name>
> <url-pattern>/axis2-admin/*</url-pattern>
> </servlet-mapping>
> <welcome-file-list>
> <welcome-file>index.html</welcome-file>
> <welcome-file>index.htm</welcome-file>
> <welcome-file>index.jsp</welcome-file>
> <welcome-file>default.html</welcome-file>
> <welcome-file>default.htm</welcome-file>
> <welcome-file>default.jsp</welcome-file>
> </welcome-file-list>
> </web-app>
> axis2.xml
> <!--
> /*
> * Copyright 2001-2004 The Apache Software Foundation.
> *
> * Licensed under the Apache License, Version 2.0 (the "License");
> * you may not use this file except in compliance with the License.
> * You may obtain a copy of the License at
> *
> * http://www.apache.org/licenses/LICENSE-2.0
> *
> * Unless required by applicable law or agreed to in writing, software
> * distributed under the License is distributed on an "AS IS" BASIS,
> * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
> * See the License for the specific language governing permissions and
> * limitations under the License.
> */
> -->
> <axisconfig name="AxisJava2.0">
> <!-- ================================================= -->
> <!-- Parameters -->
> <!-- ================================================= -->
> <parameter name="hotdeployment">true</parameter>
> <parameter name="hotupdate">false</parameter>
> <parameter name="enableMTOM">false</parameter>
> <parameter name="enableSwA">false</parameter>
> <!--Uncomment if you want to enable file caching for attachments -->
> <!--parameter name="cacheAttachments">true</parameter>
> <parameter name="attachmentDIR"></parameter>
> <parameter name="sizeThreshold">4000</parameter-->
> <!--This will give out the timout of the configuration contexts, in milliseconds-->
> <parameter name="ConfigContextTimeoutInterval">30000</parameter>
> <!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
> <!--that behavior.-->
> <parameter name="sendStacktraceDetailsWithFaults">false</parameter>
> <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
> <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
> <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
> <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
> <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
> <parameter name="userName">admin</parameter>
> <parameter name="password">axis2</parameter>
> <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
> <!--<parameter name="ServicesDirectory">services</parameter>-->
> <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
> <!--<parameter name="ModulesDirectory">modules</parameter>-->
>
> <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
> <!--root which can configured using the following contextRoot parameter-->
> <parameter name="contextRoot">ITG/Exigen</parameter>
> <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
> <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
> <!--context path to proper Axis2 servlets-->
> <parameter name="servicePath">Exigen/services</parameter>
> <!--<parameter name="restPath">Exigen/rest</parameter>
> --><!--==============================================================-->
> <!-- Custom Deplyers -->
> <!--==============================================================-->
> <!--To have POJO (Service as only one class file , class can be annotated one or not)
> support uncomment the following XML tag-->
> <!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".class" directory="pojo"/>-->
> <!--To have POJO (Service as more than one class , so a jar file) support uncomment the following XML tag-->
> <!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".jar" directory="pojo"/>-->
> <!-- Following parameter will completely disable REST handling in Axis2-->
> <parameter name="disableREST" locked="true">false</parameter>
> <!-- If you have a front end host which exposes this webservice using a different public URL -->
> <!-- use this parameter to override autodetected url -->
> <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->
> <!-- The way of adding listener to the system-->
> <!-- <listener class="org.apache.axis2.ObserverIMPL">-->
> <!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
> <!-- </listener>-->
>
> <!-- ================================================= -->
> <!-- Message Receivers -->
> <!-- ================================================= -->
> <!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
> <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
> <!--any operation -->
> <!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
> <messageReceivers>
> <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
> class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
> <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
> class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
> <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
> class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
> <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
> class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
> </messageReceivers>
> <!-- ================================================= -->
> <!-- Message Formatter -->
> <!-- ================================================= -->
> <!--Following content type to message formatter mapping can be used to implement support for different message -->
> <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
> <messageFormatters>
> <messageFormatter contentType="application/x-www-form-urlencoded"
> class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
> <messageFormatter contentType="multipart/form-data"
> class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
> <messageFormatter contentType="application/xml"
> class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
> </messageFormatters>
> <!-- ================================================= -->
> <!-- Message Builders -->
> <!-- ================================================= -->
> <!--Following content type to builder mapping can be used to implement support for different message -->
> <!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
> <messageBuilders>
> <messageBuilder contentType="application/xml"
> class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
> <messageBuilder contentType="application/x-www-form-urlencoded"
> class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
> <messageBuilder contentType="multipart/form-data"
> class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
> </messageBuilders>
> <!-- ================================================= -->
> <!-- Transport Ins -->
> <!-- ================================================= -->
> <transportReceiver name="http"
> class="org.apache.axis2.transport.http.SimpleHTTPServer">
> <parameter name="port">9080</parameter>
> <!-- Here is the complete list of supported parameters (see example settings further below):
> port: the port to listen on (default 6060)
> hostname: if non-null, url prefix used in reply-to endpoint references (default null)
> originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
> requestTimeout: value in millis of time that requests can wait for data (default 20000)
> requestTcpNoDelay: true to maximize performance and minimize latency (default true)
> false to minimize bandwidth consumption by combining segments
> requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
> requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
> note that default queue never fills up: see HttpFactory
> threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
> note that no such threads can exist with default unbounded request queue
> threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
> -->
> <parameter name="hostname">http://localhost/</parameter>
> <!-- <parameter name="originServer">My-Server/1.1</parameter> -->
> <!-- <parameter name="requestTimeout">10000</parameter> -->
> <!-- <parameter name="requestTcpNoDelay">false</parameter> -->
> <!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
> <!-- <parameter name="RequestMaxThreadPoolSize">100</parameter> -->
> <!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
> <!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
> </transportReceiver>
> <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
> <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
> <parameter name="myTopicConnectionFactory">
> <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
> <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
> <parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
> </parameter>
> <parameter name="myQueueConnectionFactory">
> <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
> <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
> <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
> </parameter>
> <parameter name="default">
> <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
> <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
> <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
> </parameter>
> </transportReceiver>-->
> <!-- ================================================= -->
> <!-- Mail Transport Listener -->
> <!-- This is a sample configuration. It assumes a mail server running in localhost.
> Listener pops messages that comes to the email address red@localhost. Users
> password is red. Listener connect to the server every 3000 milliseconds.
> Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
> http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
> -->
> <!-- ================================================= -->
> <!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
> <parameter name="mail.pop3.host">localhost</parameter>
> <parameter name="mail.pop3.user">red</parameter>
> <parameter name="mail.store.protocol">pop3</parameter>
> <parameter name="transport.mail.pop3.password">red</parameter>
> <parameter name="transport.mail.replyToAddress">red@localhost</parameter>
> <parameter name="transport.listener.interval">3000</parameter>
> </transportReceiver>-->
> <!--Uncomment if you want to have TCP transport support-->
> <!--transportReceiver name="tcp"
> class="org.apache.axis2.transport.tcp.TCPServer">
> <parameter name="port">6060</parameter-->>
> <!--If you want to give your own host address for EPR generation-->
> <!--uncomment the following paramter , and set it as you required.-->
> <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
> <!-- /transportReceiver -->
> <!-- ================================================= -->
> <!-- Transport Outs -->
> <!-- ================================================= -->
> <transportSender name="tcp"
> class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
> <transportSender name="local"
> class="org.apache.axis2.transport.local.LocalTransportSender"/>
> <transportSender name="http"
> class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
> <parameter name="PROTOCOL">HTTP/1.1</parameter>
> <parameter name="Transfer-Encoding">chunked</parameter>
> <!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
> <!-- <parameter name="OmitSOAP12Action">true</parameter> -->
> </transportSender>
> <transportSender name="https"
> class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
> <parameter name="PROTOCOL">HTTP/1.1</parameter>
> <parameter name="Transfer-Encoding">chunked</parameter>
> </transportSender>
> <transportSender name="jms"
> class="org.apache.axis2.transport.jms.JMSSender"/>
> <!-- ================================================= -->
> <!-- Mail Transport Sender -->
> <!--Only need to uncomment the sender. Configuration is achieved with every client.
> At any instant mail host should be given. Sample configuration has been given.
> http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
> -->
> <!-- ================================================= -->
> <!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
> <parameter name="mail.smtp.host">localhost</parameter>
> </transportSender>-->
> <!-- ================================================= -->
> <!-- Global Modules -->
> <!-- ================================================= -->
> <!-- Comment this to disable Addressing -->
> <!--<module ref="addressing"/>
>
> --><!--Configuring module , providing parameters for modules whether they refer or not-->
> <!--<moduleConfig name="addressing">-->
> <!--<parameter name="addressingPara">N/A</parameter>-->
> <!--</moduleConfig>-->
> <!-- ================================================= -->
> <!-- Clustering -->
> <!-- ================================================= -->
> <!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
> <!--
> <cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
> <parameter name="param1">value1</parameter>
> <configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager">
> <listeners>
> </listeners>
> </configurationManager>
> <contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager">
> <listeners>
> </listeners>
> </contextManager>
> </cluster>
> -->
> <!-- ================================================= -->
> <!-- Phases -->
> <!-- ================================================= -->
> <phaseOrder type="InFlow">
> <!-- System predefined phases -->
> <phase name="Transport">
> <handler name="RequestURIBasedDispatcher"
> class="org.apache.axis2.engine.RequestURIBasedDispatcher">
> <order phase="Transport"/>
> </handler>
> <handler name="SOAPActionBasedDispatcher"
> class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
> <order phase="Transport"/>
> </handler>
> </phase>
> <phase name="Security"/>
> <phase name="PreDispatch"/>
> <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
> <handler name="AddressingBasedDispatcher"
> class="org.apache.axis2.engine.AddressingBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="RequestURIOperationDispatcher"
> class="org.apache.axis2.engine.RequestURIOperationDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="SOAPMessageBodyBasedDispatcher"
> class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="HTTPLocationBasedDispatcher"
> class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="InstanceDispatcher"
> class="org.apache.axis2.engine.InstanceDispatcher">
> <order phase="Dispatch"/>
> </handler>
> </phase>
> <!-- System predefined phases -->
> <!-- After Postdispatch phase module author or service author can add any phase he want -->
> <phase name="OperationInPhase"/>
> <phase name="soapmonitorPhase"/>
> </phaseOrder>
> <phaseOrder type="OutFlow">
> <!-- user can add his own phases to this area -->
> <phase name="soapmonitorPhase"/>
> <phase name="OperationOutPhase"/>
> <!--system predefined phase-->
> <!--these phase will run irrespective of the service-->
> <phase name="PolicyDetermination"/>
> <phase name="MessageOut"/>
> <phase name="Security"/>
> </phaseOrder>
> <phaseOrder type="InFaultFlow">
> <phase name="PreDispatch"/>
> <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
> <handler name="RequestURIBasedDispatcher"
> class="org.apache.axis2.engine.RequestURIBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="SOAPActionBasedDispatcher"
> class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="AddressingBasedDispatcher"
> class="org.apache.axis2.engine.AddressingBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="RequestURIOperationDispatcher"
> class="org.apache.axis2.engine.RequestURIOperationDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="SOAPMessageBodyBasedDispatcher"
> class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="HTTPLocationBasedDispatcher"
> class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
> <order phase="Dispatch"/>
> </handler>
> <handler name="InstanceDispatcher"
> class="org.apache.axis2.engine.InstanceDispatcher">
> <order phase="PostDispatch"/>
> </handler>
> </phase>
> <!-- user can add his own phases to this area -->
> <phase name="OperationInFaultPhase"/>
> <phase name="soapmonitorPhase"/>
> </phaseOrder>
> <phaseOrder type="OutFaultFlow">
> <!-- user can add his own phases to this area -->
> <phase name="soapmonitorPhase"/>
> <phase name="OperationOutFaultPhase"/>
> <phase name="PolicyDetermination"/>
> <phase name="MessageOut"/>
> </phaseOrder>
> </axisconfig>
--
This message is automatically generated by JIRA.
-
You can reply to this email to add a comment to the issue online.
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-dev-help@ws.apache.org