You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@openoffice.apache.org by Bjuråkers GIF <bg...@mbox.lidnet.se> on 2013/08/14 14:57:05 UTC

pop-up help Idon´t anderstand the problem

Using Open Office, workin with a dokument, use “tabeller” , text and pictures.

The dokument will not hold my design, Al is all over when I do something new.

And this pop-up will come up now and then.

What is it?

My thanks fore an answer.

in Swedish if possibly

file is with email, in swedish, whith printscreen

Lillemor Munter
bgif@mbox.lidnet.se

Re: pop-up help I don't understand the problem

Posted by Rory O'Farrell <of...@iol.ie>.
On Wed, 21 Aug 2013 11:52:36 -0500
Dale Erwin <da...@casaerwin.org> wrote:

> Even this is no good for 1 sheet (4 pages) per signature.  For the 
> so-called "perfect" binding method, if there is more than one sheet per 
> signature, then the sheets of each signature must be sewn together.  
> More than one sheet per signature also results in uneven edges when the 
> book is closed.
> 
> The only way I have been able to do this, after exporting to pdf and 
> using the booklet function,  is to print pages 1 to 4, then pages 5 to 
> 8, then pages 9 to 12, etc.  This means that for a book of 200 pages, I 
> have to run 200/4=50 print jobs.  I have one book which is a dictionary 
> consisting of 566 pages which means I have to run 142 print jobs.  Of 
> course, these figures only apply to printing on a printer with duplex 
> capability.  Otherwise, these figures are doubled.
> 
> Dale Erwin
> Jr. 28 de Julio 657, Depto. 03
> Magdalena del Mar, Lima 17 PERU
> http://leather.casaerwin.org
> 
> On 8/14/2013 1:49 PM, Rory O'Farrell wrote:
> > On Wed, 14 Aug 2013 12:03:15 -0500
> > Dale Erwin <da...@casaerwin.org> wrote:
> >
> >> Unfortunately, this doesn't work too well for large documents, but it's
> >> fine for documents of 2 to 4 sheets.  The larger documnts need to be
> >> divided into smaller units.  I prefer one sheet per unit so that I can
> >> fold them and bind them at home.  There is no easy way I have found to
> >> do this.
> > The easiest way to do this is to Export as PDF. Then use a suitable PDF reader, such as Adobe Reader, to Print Booklet on a duplex printer. This will shrink the pages to the half size of the sheet and reorder the pages to the sheets in the correct order, permitting one to print binding signatures (groups) of 16, 24 or 32 pages.
> >

You are wrong. Just print as I say, then chop the signatures in half done the centre line. All will be well. 

In fact, there is no need to print in signatures for perfect binding. Just print the entire book, page 1 .. nnn on a duplex printer, using the Adobe Reader print booklet, and chop the paper stack down the centre.

I do it all the time.
-- 
Rory O'Farrell <of...@iol.ie>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@openoffice.apache.org
For additional commands, e-mail: users-help@openoffice.apache.org


Re: pop-up help I don't understand the problem

Posted by Dale Erwin <da...@casaerwin.org>.
Even this is no good for 1 sheet (4 pages) per signature.  For the 
so-called "perfect" binding method, if there is more than one sheet per 
signature, then the sheets of each signature must be sewn together.  
More than one sheet per signature also results in uneven edges when the 
book is closed.

The only way I have been able to do this, after exporting to pdf and 
using the booklet function,  is to print pages 1 to 4, then pages 5 to 
8, then pages 9 to 12, etc.  This means that for a book of 200 pages, I 
have to run 200/4=50 print jobs.  I have one book which is a dictionary 
consisting of 566 pages which means I have to run 142 print jobs.  Of 
course, these figures only apply to printing on a printer with duplex 
capability.  Otherwise, these figures are doubled.

Dale Erwin
Jr. 28 de Julio 657, Depto. 03
Magdalena del Mar, Lima 17 PERU
http://leather.casaerwin.org

On 8/14/2013 1:49 PM, Rory O'Farrell wrote:
> On Wed, 14 Aug 2013 12:03:15 -0500
> Dale Erwin <da...@casaerwin.org> wrote:
>
>> Unfortunately, this doesn't work too well for large documents, but it's
>> fine for documents of 2 to 4 sheets.  The larger documnts need to be
>> divided into smaller units.  I prefer one sheet per unit so that I can
>> fold them and bind them at home.  There is no easy way I have found to
>> do this.
> The easiest way to do this is to Export as PDF. Then use a suitable PDF reader, such as Adobe Reader, to Print Booklet on a duplex printer. This will shrink the pages to the half size of the sheet and reorder the pages to the sheets in the correct order, permitting one to print binding signatures (groups) of 16, 24 or 32 pages.
>


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@openoffice.apache.org
For additional commands, e-mail: users-help@openoffice.apache.org


Re: pop-up help I don't understand the problem

Posted by Rory O'Farrell <of...@iol.ie>.
On Wed, 14 Aug 2013 12:03:15 -0500
Dale Erwin <da...@casaerwin.org> wrote:

> Unfortunately, this doesn't work too well for large documents, but it's 
> fine for documents of 2 to 4 sheets.  The larger documnts need to be 
> divided into smaller units.  I prefer one sheet per unit so that I can 
> fold them and bind them at home.  There is no easy way I have found to 
> do this.
> 
> Dale Erwin
> Jr. 28 de Julio 657, Depto. 03
> Magdalena del Mar, Lima 17 PERU
> http://leather.casaerwin.org
> 
> On 8/14/2013 10:53 AM, Brian Barker wrote:
> > At 14:57 14/08/2013 +0200, Lillemor Munter wrote:
> >> Using Open Office, working with a document, use "tabeller", text and 
> >> pictures.  The document will not hold my design, Al is all over when 
> >> I do something new.  And this pop-up will come up now and then.  What 
> >> is it?
> >>
> >> ...\Programblad 2013.odt\content.xml finns inte.  Vad betyder denna? 
> >> Kommer fram när jag arbetar i Open Office.
> >
> > I'm not sure how you are reaching this message.  Any .odt text 
> > document file is a zipped archive of a number of components, one of 
> > which is always content.xml.  If this component is genuinely missing 
> > from your .odt file, then the file is corrupt.  But it may be that, 
> > instead of opening the .odt file itself (as you should be), you are 
> > unzipping the .odt file and trying to open the content.xml file 
> > inside.  Open the .odt file directly instead. (Have you perhaps 
> > associated .odt with your zip utility, so that double-clicking an .odt 
> > file unzips it instead of opening it in OpenOffice?  If so, the quick 
> > workaround is to open the document file from inside OpenOffice using 
> > File | Open... .)
> >
> >> Vill ha 10st A4-sidor som sedan viks ihop till ett A5-häfte. Måste 
> >> man göra varje sida för sig? Ej testat om formaten håller sig då - 
> >> kanske. Men tungt jobba i typ 10-20 olika dokument för att få fram 
> >> ett häfte.
> >
> > This part is easy: OpenOffice does this well and calls this a "brochure".
> > o Set your single document to have A5 pages in portrait orientation.
> > o Create the document normally.
> > o Go to File | Printer Settings... | Properties... and set your 
> > printer to use A4 paper in landscape orientation.
> > o Go to Tools | Options... | OpenOffice Writer | Print | Pages and 
> > tick Brochure.  (Alternatively you can tick this in the print dialogue 
> > at File | Print... | Options... | Pages | Brochure.)
> >
> > OpenOffice will rearrange the various (double-sided) pages so that you 
> > can simply fold the resulting stack of printed sheets into a brochure
> 

The easiest way to do this is to Export as PDF. Then use a suitable PDF reader, such as Adobe Reader, to Print Booklet on a duplex printer. This will shrink the pages to the half size of the sheet and reorder the pages to the sheets in the correct order, permitting one to print binding signatures (groups) of 16, 24 or 32 pages.

-- 
Rory O'Farrell <of...@iol.ie>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@openoffice.apache.org
For additional commands, e-mail: users-help@openoffice.apache.org


Re: pop-up help I don't understand the problem

Posted by Dale Erwin <da...@casaerwin.org>.
Unfortunately, this doesn't work too well for large documents, but it's 
fine for documents of 2 to 4 sheets.  The larger documnts need to be 
divided into smaller units.  I prefer one sheet per unit so that I can 
fold them and bind them at home.  There is no easy way I have found to 
do this.

Dale Erwin
Jr. 28 de Julio 657, Depto. 03
Magdalena del Mar, Lima 17 PERU
http://leather.casaerwin.org

On 8/14/2013 10:53 AM, Brian Barker wrote:
> At 14:57 14/08/2013 +0200, Lillemor Munter wrote:
>> Using Open Office, working with a document, use "tabeller", text and 
>> pictures.  The document will not hold my design, Al is all over when 
>> I do something new.  And this pop-up will come up now and then.  What 
>> is it?
>>
>> ...\Programblad 2013.odt\content.xml finns inte.  Vad betyder denna? 
>> Kommer fram när jag arbetar i Open Office.
>
> I'm not sure how you are reaching this message.  Any .odt text 
> document file is a zipped archive of a number of components, one of 
> which is always content.xml.  If this component is genuinely missing 
> from your .odt file, then the file is corrupt.  But it may be that, 
> instead of opening the .odt file itself (as you should be), you are 
> unzipping the .odt file and trying to open the content.xml file 
> inside.  Open the .odt file directly instead. (Have you perhaps 
> associated .odt with your zip utility, so that double-clicking an .odt 
> file unzips it instead of opening it in OpenOffice?  If so, the quick 
> workaround is to open the document file from inside OpenOffice using 
> File | Open... .)
>
>> Vill ha 10st A4-sidor som sedan viks ihop till ett A5-häfte. Måste 
>> man göra varje sida för sig? Ej testat om formaten håller sig då - 
>> kanske. Men tungt jobba i typ 10-20 olika dokument för att få fram 
>> ett häfte.
>
> This part is easy: OpenOffice does this well and calls this a "brochure".
> o Set your single document to have A5 pages in portrait orientation.
> o Create the document normally.
> o Go to File | Printer Settings... | Properties... and set your 
> printer to use A4 paper in landscape orientation.
> o Go to Tools | Options... | OpenOffice Writer | Print | Pages and 
> tick Brochure.  (Alternatively you can tick this in the print dialogue 
> at File | Print... | Options... | Pages | Brochure.)
>
> OpenOffice will rearrange the various (double-sided) pages so that you 
> can simply fold the resulting stack of printed sheets into a brochure


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@openoffice.apache.org
For additional commands, e-mail: users-help@openoffice.apache.org


Re: pop-up help I don't understand the problem

Posted by Brian Barker <b....@btinternet.com>.
At 14:57 14/08/2013 +0200, Lillemor Munter wrote:
>Using Open Office, working with a document, use 
>"tabeller", text and pictures.  The document 
>will not hold my design, Al is all over when I 
>do something new.  And this pop-up will come up now and then.  What is it?
>
>...\Programblad 2013.odt\content.xml finns 
>inte.  Vad betyder denna? Kommer fram när jag arbetar i Open Office.

I'm not sure how you are reaching this 
message.  Any .odt text document file is a zipped 
archive of a number of components, one of which 
is always content.xml.  If this component is 
genuinely missing from your .odt file, then the 
file is corrupt.  But it may be that, instead of 
opening the .odt file itself (as you should be), 
you are unzipping the .odt file and trying to 
open the content.xml file inside.  Open the .odt 
file directly instead.  (Have you perhaps 
associated .odt with your zip utility, so that 
double-clicking an .odt file unzips it instead of 
opening it in OpenOffice?  If so, the quick 
workaround is to open the document file from 
inside OpenOffice using File | Open... .)

>Vill ha 10st A4-sidor som sedan viks ihop till 
>ett A5-häfte. Måste man göra varje sida för sig? 
>Ej testat om formaten håller sig då - kanske. 
>Men tungt jobba i typ 10-20 olika dokument för att få fram ett häfte.

This part is easy: OpenOffice does this well and calls this a "brochure".
o Set your single document to have A5 pages in portrait orientation.
o Create the document normally.
o Go to File | Printer Settings... | 
Properties... and set your printer to use A4 paper in landscape orientation.
o Go to Tools | Options... | OpenOffice Writer | 
Print | Pages and tick Brochure.  (Alternatively 
you can tick this in the print dialogue at File | 
Print... | Options... | Pages | Brochure.)

OpenOffice will rearrange the various 
(double-sided) pages so that you can simply fold 
the resulting stack of printed sheets into a brochure.

>My thanks for an answer in Swedish if possibly

Sorry, but I do not write Swedish.

I trust this helps.

Brian Barker


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@openoffice.apache.org
For additional commands, e-mail: users-help@openoffice.apache.org