You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Nux! <nu...@li.nux.ro> on 2016/02/25 12:51:18 UTC
VR metadata unreachable from VPC tier
Hi,
Just a quick one, before I go on submitting a bug, apparently my VMs connected in a VPC tier ("allow" acl) cannot get the metadata password from the VR.
It works from normal isolated networks.
Tested on ACS 4.8, Xen & KVM.
Has anyone seen this?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
Re: VR metadata unreachable from VPC tier
Posted by Nux! <nu...@li.nux.ro>.
Pierre-Luc,
DHCP works, metadata does not.
I restarted the VPC and it started to work, it happened one more time after that; somewhat related to setting up a 1:1 NAT to the only VM in the VPC, however I did not have time to look into it more thoroughly. Hopefully next time.
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
----- Original Message -----
> From: "Pierre-Luc Dion" <pd...@cloudops.com>
> To: dev@cloudstack.apache.org
> Sent: Tuesday, 8 March, 2016 12:50:52
> Subject: Re: VR metadata unreachable from VPC tier
> Hi nux,
>
> Does the VM got is hostname and ip? Would it be just the password set that
> is not working?
> On Feb 25, 2016 14:45, "Syed Mushtaq" <sy...@gmail.com> wrote:
>
>> http://fpaste.org/329431/42948514/raw/
>>
>> On Thu, Feb 25, 2016 at 2:36 PM, Nux! <nu...@li.nux.ro> wrote:
>>
>> > Anywho, a VR reboot has not done anything. I continue to have the same
>> > issue.
>> > Here's the VR's iptables config, something is wrong with it, haven't
>> found
>> > what, once I flush the rules I can get to VRIP:8080
>> > http://fpaste.org/329413/45642787/raw/
>> >
>> > Can you give your VR's ruleset, for comparison?
>> >
>> > --
>> > Sent from the Delta quadrant using Borg technology!
>> >
>> > Nux!
>> > www.nux.ro
>> >
>> > ----- Original Message -----
>> > > From: "Nux!" <nu...@li.nux.ro>
>> > > To: dev@cloudstack.apache.org
>> > > Sent: Thursday, 25 February, 2016 19:04:13
>> > > Subject: Re: VR metadata unreachable from VPC tier
>> >
>> > > Thanks, I'll investigate some more.
>> > >
>> > > In the meanwhile I have tried to restart the VPC network, but nothing
>> > happened
>> > > when I clicked the restart button, the network is now listed with
>> > "restart
>> > > required Yes". What does that mean?
>> > >
>> > > --
>> > > Sent from the Delta quadrant using Borg technology!
>> > >
>> > > Nux!
>> > > www.nux.ro
>> > >
>> > > ----- Original Message -----
>> > >> From: "Syed Mushtaq" <sy...@gmail.com>
>> > >> To: dev@cloudstack.apache.org
>> > >> Sent: Thursday, 25 February, 2016 17:33:02
>> > >> Subject: Re: VR metadata unreachable from VPC tier
>> > >
>> > >> It works in my local setup Nux. A VPC with one tier and a password
>> > enabled
>> > >> template. I am working on the master though. The flow to set password
>> > on a
>> > >> VM is the same for a normal VR and a VPC VR. The problem maybe that
>> the
>> > VPC
>> > >> VR is not being sleected by the management server somehow. So there
>> > must be
>> > >> some problem with the VPC VR <=> CS management server.
>> > >>
>> > >> -Syed
>> > >>
>> > >>
>> > >> On Thu, Feb 25, 2016 at 10:38 AM, Nux! <nu...@li.nux.ro> wrote:
>> > >>
>> > >>> Deploy new VM.
>> > >>>
>> > >>> --
>> > >>> Sent from the Delta quadrant using Borg technology!
>> > >>>
>> > >>> Nux!
>> > >>> www.nux.ro
>> > >>>
>> > >>> ----- Original Message -----
>> > >>> > From: "Syed Mushtaq" <sy...@gmail.com>
>> > >>> > To: dev@cloudstack.apache.org
>> > >>> > Sent: Thursday, 25 February, 2016 15:35:04
>> > >>> > Subject: Re: VR metadata unreachable from VPC tier
>> > >>>
>> > >>> > I see thanks. So this happens when you create a new VM or when you
>> > try to
>> > >>> > reset password of an already existing VM?
>> > >>> >
>> > >>> > On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
>> > >>> >
>> > >>> >> Hi,
>> > >>> >>
>> > >>> >> I am yet to restart the VR, will do this a bit later on to see if
>> > the
>> > >>> >> problems gets fixed.
>> > >>> >>
>> > >>> >> Syed, the VM is trying to get the root password from the VR, but
>> it
>> > >>> can't
>> > >>> >> connect to it.
>> > >>> >>
>> > >>> >> --
>> > >>> >> Sent from the Delta quadrant using Borg technology!
>> > >>> >>
>> > >>> >> Nux!
>> > >>> >> www.nux.ro
>> > >>> >>
>> > >>> >> ----- Original Message -----
>> > >>> >> > From: "Syed Mushtaq" <sy...@gmail.com>
>> > >>> >> > To: dev@cloudstack.apache.org
>> > >>> >> > Sent: Thursday, 25 February, 2016 14:47:17
>> > >>> >> > Subject: Re: VR metadata unreachable from VPC tier
>> > >>> >>
>> > >>> >> > Hi nux,
>> > >>> >> >
>> > >>> >> > Just so I understand, what is the metadata that VR sends to a
>> VM?
>> > >>> >> >
>> > >>> >> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <
>> pdion@cloudops.com
>> > >
>> > >>> >> wrote:
>> > >>> >> >
>> > >>> >> >> When you have this issue, if you setup a Portforwarding for ssh
>> > for
>> > >>> the
>> > >>> >> VM,
>> > >>> >> >> does the PF rule work?
>> > >>> >> >>
>> > >>> >> >> We observed similar issue where VR does not apply or receive
>> > configs
>> > >>> >> pushed
>> > >>> >> >> by the management-server. I haven't really start investigate
>> > that but
>> > >>> >> >> wondering if you have similar issue. and usually a restart of
>> > the VR
>> > >>> or
>> > >>> >> >> reset of the VPC fixe the issue.
>> > >>> >> >>
>> > >>> >> >>
>> > >>> >> >> PL
>> > >>> >> >>
>> > >>> >> >>
>> > >>> >> >>
>> > >>> >> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
>> > >>> >> >>
>> > >>> >> >> > Hi,
>> > >>> >> >> >
>> > >>> >> >> > Just a quick one, before I go on submitting a bug, apparently
>> > my
>> > >>> VMs
>> > >>> >> >> > connected in a VPC tier ("allow" acl) cannot get the metadata
>> > >>> password
>> > >>> >> >> from
>> > >>> >> >> > the VR.
>> > >>> >> >> > It works from normal isolated networks.
>> > >>> >> >> >
>> > >>> >> >> > Tested on ACS 4.8, Xen & KVM.
>> > >>> >> >> >
>> > >>> >> >> > Has anyone seen this?
>> > >>> >> >> >
>> > >>> >> >> >
>> > >>> >> >> > --
>> > >>> >> >> > Sent from the Delta quadrant using Borg technology!
>> > >>> >> >> >
>> > >>> >> >> > Nux!
>> > >>> >> >> > www.nux.ro
>> >
Re: VR metadata unreachable from VPC tier
Posted by Pierre-Luc Dion <pd...@cloudops.com>.
Hi nux,
Does the VM got is hostname and ip? Would it be just the password set that
is not working?
On Feb 25, 2016 14:45, "Syed Mushtaq" <sy...@gmail.com> wrote:
> http://fpaste.org/329431/42948514/raw/
>
> On Thu, Feb 25, 2016 at 2:36 PM, Nux! <nu...@li.nux.ro> wrote:
>
> > Anywho, a VR reboot has not done anything. I continue to have the same
> > issue.
> > Here's the VR's iptables config, something is wrong with it, haven't
> found
> > what, once I flush the rules I can get to VRIP:8080
> > http://fpaste.org/329413/45642787/raw/
> >
> > Can you give your VR's ruleset, for comparison?
> >
> > --
> > Sent from the Delta quadrant using Borg technology!
> >
> > Nux!
> > www.nux.ro
> >
> > ----- Original Message -----
> > > From: "Nux!" <nu...@li.nux.ro>
> > > To: dev@cloudstack.apache.org
> > > Sent: Thursday, 25 February, 2016 19:04:13
> > > Subject: Re: VR metadata unreachable from VPC tier
> >
> > > Thanks, I'll investigate some more.
> > >
> > > In the meanwhile I have tried to restart the VPC network, but nothing
> > happened
> > > when I clicked the restart button, the network is now listed with
> > "restart
> > > required Yes". What does that mean?
> > >
> > > --
> > > Sent from the Delta quadrant using Borg technology!
> > >
> > > Nux!
> > > www.nux.ro
> > >
> > > ----- Original Message -----
> > >> From: "Syed Mushtaq" <sy...@gmail.com>
> > >> To: dev@cloudstack.apache.org
> > >> Sent: Thursday, 25 February, 2016 17:33:02
> > >> Subject: Re: VR metadata unreachable from VPC tier
> > >
> > >> It works in my local setup Nux. A VPC with one tier and a password
> > enabled
> > >> template. I am working on the master though. The flow to set password
> > on a
> > >> VM is the same for a normal VR and a VPC VR. The problem maybe that
> the
> > VPC
> > >> VR is not being sleected by the management server somehow. So there
> > must be
> > >> some problem with the VPC VR <=> CS management server.
> > >>
> > >> -Syed
> > >>
> > >>
> > >> On Thu, Feb 25, 2016 at 10:38 AM, Nux! <nu...@li.nux.ro> wrote:
> > >>
> > >>> Deploy new VM.
> > >>>
> > >>> --
> > >>> Sent from the Delta quadrant using Borg technology!
> > >>>
> > >>> Nux!
> > >>> www.nux.ro
> > >>>
> > >>> ----- Original Message -----
> > >>> > From: "Syed Mushtaq" <sy...@gmail.com>
> > >>> > To: dev@cloudstack.apache.org
> > >>> > Sent: Thursday, 25 February, 2016 15:35:04
> > >>> > Subject: Re: VR metadata unreachable from VPC tier
> > >>>
> > >>> > I see thanks. So this happens when you create a new VM or when you
> > try to
> > >>> > reset password of an already existing VM?
> > >>> >
> > >>> > On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
> > >>> >
> > >>> >> Hi,
> > >>> >>
> > >>> >> I am yet to restart the VR, will do this a bit later on to see if
> > the
> > >>> >> problems gets fixed.
> > >>> >>
> > >>> >> Syed, the VM is trying to get the root password from the VR, but
> it
> > >>> can't
> > >>> >> connect to it.
> > >>> >>
> > >>> >> --
> > >>> >> Sent from the Delta quadrant using Borg technology!
> > >>> >>
> > >>> >> Nux!
> > >>> >> www.nux.ro
> > >>> >>
> > >>> >> ----- Original Message -----
> > >>> >> > From: "Syed Mushtaq" <sy...@gmail.com>
> > >>> >> > To: dev@cloudstack.apache.org
> > >>> >> > Sent: Thursday, 25 February, 2016 14:47:17
> > >>> >> > Subject: Re: VR metadata unreachable from VPC tier
> > >>> >>
> > >>> >> > Hi nux,
> > >>> >> >
> > >>> >> > Just so I understand, what is the metadata that VR sends to a
> VM?
> > >>> >> >
> > >>> >> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <
> pdion@cloudops.com
> > >
> > >>> >> wrote:
> > >>> >> >
> > >>> >> >> When you have this issue, if you setup a Portforwarding for ssh
> > for
> > >>> the
> > >>> >> VM,
> > >>> >> >> does the PF rule work?
> > >>> >> >>
> > >>> >> >> We observed similar issue where VR does not apply or receive
> > configs
> > >>> >> pushed
> > >>> >> >> by the management-server. I haven't really start investigate
> > that but
> > >>> >> >> wondering if you have similar issue. and usually a restart of
> > the VR
> > >>> or
> > >>> >> >> reset of the VPC fixe the issue.
> > >>> >> >>
> > >>> >> >>
> > >>> >> >> PL
> > >>> >> >>
> > >>> >> >>
> > >>> >> >>
> > >>> >> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
> > >>> >> >>
> > >>> >> >> > Hi,
> > >>> >> >> >
> > >>> >> >> > Just a quick one, before I go on submitting a bug, apparently
> > my
> > >>> VMs
> > >>> >> >> > connected in a VPC tier ("allow" acl) cannot get the metadata
> > >>> password
> > >>> >> >> from
> > >>> >> >> > the VR.
> > >>> >> >> > It works from normal isolated networks.
> > >>> >> >> >
> > >>> >> >> > Tested on ACS 4.8, Xen & KVM.
> > >>> >> >> >
> > >>> >> >> > Has anyone seen this?
> > >>> >> >> >
> > >>> >> >> >
> > >>> >> >> > --
> > >>> >> >> > Sent from the Delta quadrant using Borg technology!
> > >>> >> >> >
> > >>> >> >> > Nux!
> > >>> >> >> > www.nux.ro
> >
>
Re: VR metadata unreachable from VPC tier
Posted by Syed Mushtaq <sy...@gmail.com>.
http://fpaste.org/329431/42948514/raw/
On Thu, Feb 25, 2016 at 2:36 PM, Nux! <nu...@li.nux.ro> wrote:
> Anywho, a VR reboot has not done anything. I continue to have the same
> issue.
> Here's the VR's iptables config, something is wrong with it, haven't found
> what, once I flush the rules I can get to VRIP:8080
> http://fpaste.org/329413/45642787/raw/
>
> Can you give your VR's ruleset, for comparison?
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>
> ----- Original Message -----
> > From: "Nux!" <nu...@li.nux.ro>
> > To: dev@cloudstack.apache.org
> > Sent: Thursday, 25 February, 2016 19:04:13
> > Subject: Re: VR metadata unreachable from VPC tier
>
> > Thanks, I'll investigate some more.
> >
> > In the meanwhile I have tried to restart the VPC network, but nothing
> happened
> > when I clicked the restart button, the network is now listed with
> "restart
> > required Yes". What does that mean?
> >
> > --
> > Sent from the Delta quadrant using Borg technology!
> >
> > Nux!
> > www.nux.ro
> >
> > ----- Original Message -----
> >> From: "Syed Mushtaq" <sy...@gmail.com>
> >> To: dev@cloudstack.apache.org
> >> Sent: Thursday, 25 February, 2016 17:33:02
> >> Subject: Re: VR metadata unreachable from VPC tier
> >
> >> It works in my local setup Nux. A VPC with one tier and a password
> enabled
> >> template. I am working on the master though. The flow to set password
> on a
> >> VM is the same for a normal VR and a VPC VR. The problem maybe that the
> VPC
> >> VR is not being sleected by the management server somehow. So there
> must be
> >> some problem with the VPC VR <=> CS management server.
> >>
> >> -Syed
> >>
> >>
> >> On Thu, Feb 25, 2016 at 10:38 AM, Nux! <nu...@li.nux.ro> wrote:
> >>
> >>> Deploy new VM.
> >>>
> >>> --
> >>> Sent from the Delta quadrant using Borg technology!
> >>>
> >>> Nux!
> >>> www.nux.ro
> >>>
> >>> ----- Original Message -----
> >>> > From: "Syed Mushtaq" <sy...@gmail.com>
> >>> > To: dev@cloudstack.apache.org
> >>> > Sent: Thursday, 25 February, 2016 15:35:04
> >>> > Subject: Re: VR metadata unreachable from VPC tier
> >>>
> >>> > I see thanks. So this happens when you create a new VM or when you
> try to
> >>> > reset password of an already existing VM?
> >>> >
> >>> > On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
> >>> >
> >>> >> Hi,
> >>> >>
> >>> >> I am yet to restart the VR, will do this a bit later on to see if
> the
> >>> >> problems gets fixed.
> >>> >>
> >>> >> Syed, the VM is trying to get the root password from the VR, but it
> >>> can't
> >>> >> connect to it.
> >>> >>
> >>> >> --
> >>> >> Sent from the Delta quadrant using Borg technology!
> >>> >>
> >>> >> Nux!
> >>> >> www.nux.ro
> >>> >>
> >>> >> ----- Original Message -----
> >>> >> > From: "Syed Mushtaq" <sy...@gmail.com>
> >>> >> > To: dev@cloudstack.apache.org
> >>> >> > Sent: Thursday, 25 February, 2016 14:47:17
> >>> >> > Subject: Re: VR metadata unreachable from VPC tier
> >>> >>
> >>> >> > Hi nux,
> >>> >> >
> >>> >> > Just so I understand, what is the metadata that VR sends to a VM?
> >>> >> >
> >>> >> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pdion@cloudops.com
> >
> >>> >> wrote:
> >>> >> >
> >>> >> >> When you have this issue, if you setup a Portforwarding for ssh
> for
> >>> the
> >>> >> VM,
> >>> >> >> does the PF rule work?
> >>> >> >>
> >>> >> >> We observed similar issue where VR does not apply or receive
> configs
> >>> >> pushed
> >>> >> >> by the management-server. I haven't really start investigate
> that but
> >>> >> >> wondering if you have similar issue. and usually a restart of
> the VR
> >>> or
> >>> >> >> reset of the VPC fixe the issue.
> >>> >> >>
> >>> >> >>
> >>> >> >> PL
> >>> >> >>
> >>> >> >>
> >>> >> >>
> >>> >> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
> >>> >> >>
> >>> >> >> > Hi,
> >>> >> >> >
> >>> >> >> > Just a quick one, before I go on submitting a bug, apparently
> my
> >>> VMs
> >>> >> >> > connected in a VPC tier ("allow" acl) cannot get the metadata
> >>> password
> >>> >> >> from
> >>> >> >> > the VR.
> >>> >> >> > It works from normal isolated networks.
> >>> >> >> >
> >>> >> >> > Tested on ACS 4.8, Xen & KVM.
> >>> >> >> >
> >>> >> >> > Has anyone seen this?
> >>> >> >> >
> >>> >> >> >
> >>> >> >> > --
> >>> >> >> > Sent from the Delta quadrant using Borg technology!
> >>> >> >> >
> >>> >> >> > Nux!
> >>> >> >> > www.nux.ro
>
Re: VR metadata unreachable from VPC tier
Posted by Nux! <nu...@li.nux.ro>.
Anywho, a VR reboot has not done anything. I continue to have the same issue.
Here's the VR's iptables config, something is wrong with it, haven't found what, once I flush the rules I can get to VRIP:8080
http://fpaste.org/329413/45642787/raw/
Can you give your VR's ruleset, for comparison?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
----- Original Message -----
> From: "Nux!" <nu...@li.nux.ro>
> To: dev@cloudstack.apache.org
> Sent: Thursday, 25 February, 2016 19:04:13
> Subject: Re: VR metadata unreachable from VPC tier
> Thanks, I'll investigate some more.
>
> In the meanwhile I have tried to restart the VPC network, but nothing happened
> when I clicked the restart button, the network is now listed with "restart
> required Yes". What does that mean?
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>
> ----- Original Message -----
>> From: "Syed Mushtaq" <sy...@gmail.com>
>> To: dev@cloudstack.apache.org
>> Sent: Thursday, 25 February, 2016 17:33:02
>> Subject: Re: VR metadata unreachable from VPC tier
>
>> It works in my local setup Nux. A VPC with one tier and a password enabled
>> template. I am working on the master though. The flow to set password on a
>> VM is the same for a normal VR and a VPC VR. The problem maybe that the VPC
>> VR is not being sleected by the management server somehow. So there must be
>> some problem with the VPC VR <=> CS management server.
>>
>> -Syed
>>
>>
>> On Thu, Feb 25, 2016 at 10:38 AM, Nux! <nu...@li.nux.ro> wrote:
>>
>>> Deploy new VM.
>>>
>>> --
>>> Sent from the Delta quadrant using Borg technology!
>>>
>>> Nux!
>>> www.nux.ro
>>>
>>> ----- Original Message -----
>>> > From: "Syed Mushtaq" <sy...@gmail.com>
>>> > To: dev@cloudstack.apache.org
>>> > Sent: Thursday, 25 February, 2016 15:35:04
>>> > Subject: Re: VR metadata unreachable from VPC tier
>>>
>>> > I see thanks. So this happens when you create a new VM or when you try to
>>> > reset password of an already existing VM?
>>> >
>>> > On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
>>> >
>>> >> Hi,
>>> >>
>>> >> I am yet to restart the VR, will do this a bit later on to see if the
>>> >> problems gets fixed.
>>> >>
>>> >> Syed, the VM is trying to get the root password from the VR, but it
>>> can't
>>> >> connect to it.
>>> >>
>>> >> --
>>> >> Sent from the Delta quadrant using Borg technology!
>>> >>
>>> >> Nux!
>>> >> www.nux.ro
>>> >>
>>> >> ----- Original Message -----
>>> >> > From: "Syed Mushtaq" <sy...@gmail.com>
>>> >> > To: dev@cloudstack.apache.org
>>> >> > Sent: Thursday, 25 February, 2016 14:47:17
>>> >> > Subject: Re: VR metadata unreachable from VPC tier
>>> >>
>>> >> > Hi nux,
>>> >> >
>>> >> > Just so I understand, what is the metadata that VR sends to a VM?
>>> >> >
>>> >> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com>
>>> >> wrote:
>>> >> >
>>> >> >> When you have this issue, if you setup a Portforwarding for ssh for
>>> the
>>> >> VM,
>>> >> >> does the PF rule work?
>>> >> >>
>>> >> >> We observed similar issue where VR does not apply or receive configs
>>> >> pushed
>>> >> >> by the management-server. I haven't really start investigate that but
>>> >> >> wondering if you have similar issue. and usually a restart of the VR
>>> or
>>> >> >> reset of the VPC fixe the issue.
>>> >> >>
>>> >> >>
>>> >> >> PL
>>> >> >>
>>> >> >>
>>> >> >>
>>> >> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
>>> >> >>
>>> >> >> > Hi,
>>> >> >> >
>>> >> >> > Just a quick one, before I go on submitting a bug, apparently my
>>> VMs
>>> >> >> > connected in a VPC tier ("allow" acl) cannot get the metadata
>>> password
>>> >> >> from
>>> >> >> > the VR.
>>> >> >> > It works from normal isolated networks.
>>> >> >> >
>>> >> >> > Tested on ACS 4.8, Xen & KVM.
>>> >> >> >
>>> >> >> > Has anyone seen this?
>>> >> >> >
>>> >> >> >
>>> >> >> > --
>>> >> >> > Sent from the Delta quadrant using Borg technology!
>>> >> >> >
>>> >> >> > Nux!
>>> >> >> > www.nux.ro
Re: VR metadata unreachable from VPC tier
Posted by Nux! <nu...@li.nux.ro>.
Thanks, I'll investigate some more.
In the meanwhile I have tried to restart the VPC network, but nothing happened when I clicked the restart button, the network is now listed with "restart required Yes". What does that mean?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
----- Original Message -----
> From: "Syed Mushtaq" <sy...@gmail.com>
> To: dev@cloudstack.apache.org
> Sent: Thursday, 25 February, 2016 17:33:02
> Subject: Re: VR metadata unreachable from VPC tier
> It works in my local setup Nux. A VPC with one tier and a password enabled
> template. I am working on the master though. The flow to set password on a
> VM is the same for a normal VR and a VPC VR. The problem maybe that the VPC
> VR is not being sleected by the management server somehow. So there must be
> some problem with the VPC VR <=> CS management server.
>
> -Syed
>
>
> On Thu, Feb 25, 2016 at 10:38 AM, Nux! <nu...@li.nux.ro> wrote:
>
>> Deploy new VM.
>>
>> --
>> Sent from the Delta quadrant using Borg technology!
>>
>> Nux!
>> www.nux.ro
>>
>> ----- Original Message -----
>> > From: "Syed Mushtaq" <sy...@gmail.com>
>> > To: dev@cloudstack.apache.org
>> > Sent: Thursday, 25 February, 2016 15:35:04
>> > Subject: Re: VR metadata unreachable from VPC tier
>>
>> > I see thanks. So this happens when you create a new VM or when you try to
>> > reset password of an already existing VM?
>> >
>> > On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
>> >
>> >> Hi,
>> >>
>> >> I am yet to restart the VR, will do this a bit later on to see if the
>> >> problems gets fixed.
>> >>
>> >> Syed, the VM is trying to get the root password from the VR, but it
>> can't
>> >> connect to it.
>> >>
>> >> --
>> >> Sent from the Delta quadrant using Borg technology!
>> >>
>> >> Nux!
>> >> www.nux.ro
>> >>
>> >> ----- Original Message -----
>> >> > From: "Syed Mushtaq" <sy...@gmail.com>
>> >> > To: dev@cloudstack.apache.org
>> >> > Sent: Thursday, 25 February, 2016 14:47:17
>> >> > Subject: Re: VR metadata unreachable from VPC tier
>> >>
>> >> > Hi nux,
>> >> >
>> >> > Just so I understand, what is the metadata that VR sends to a VM?
>> >> >
>> >> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com>
>> >> wrote:
>> >> >
>> >> >> When you have this issue, if you setup a Portforwarding for ssh for
>> the
>> >> VM,
>> >> >> does the PF rule work?
>> >> >>
>> >> >> We observed similar issue where VR does not apply or receive configs
>> >> pushed
>> >> >> by the management-server. I haven't really start investigate that but
>> >> >> wondering if you have similar issue. and usually a restart of the VR
>> or
>> >> >> reset of the VPC fixe the issue.
>> >> >>
>> >> >>
>> >> >> PL
>> >> >>
>> >> >>
>> >> >>
>> >> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
>> >> >>
>> >> >> > Hi,
>> >> >> >
>> >> >> > Just a quick one, before I go on submitting a bug, apparently my
>> VMs
>> >> >> > connected in a VPC tier ("allow" acl) cannot get the metadata
>> password
>> >> >> from
>> >> >> > the VR.
>> >> >> > It works from normal isolated networks.
>> >> >> >
>> >> >> > Tested on ACS 4.8, Xen & KVM.
>> >> >> >
>> >> >> > Has anyone seen this?
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > Sent from the Delta quadrant using Borg technology!
>> >> >> >
>> >> >> > Nux!
>> >> >> > www.nux.ro
>> >> >> >
Re: VR metadata unreachable from VPC tier
Posted by Syed Mushtaq <sy...@gmail.com>.
It works in my local setup Nux. A VPC with one tier and a password enabled
template. I am working on the master though. The flow to set password on a
VM is the same for a normal VR and a VPC VR. The problem maybe that the VPC
VR is not being sleected by the management server somehow. So there must be
some problem with the VPC VR <=> CS management server.
-Syed
On Thu, Feb 25, 2016 at 10:38 AM, Nux! <nu...@li.nux.ro> wrote:
> Deploy new VM.
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>
> ----- Original Message -----
> > From: "Syed Mushtaq" <sy...@gmail.com>
> > To: dev@cloudstack.apache.org
> > Sent: Thursday, 25 February, 2016 15:35:04
> > Subject: Re: VR metadata unreachable from VPC tier
>
> > I see thanks. So this happens when you create a new VM or when you try to
> > reset password of an already existing VM?
> >
> > On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
> >
> >> Hi,
> >>
> >> I am yet to restart the VR, will do this a bit later on to see if the
> >> problems gets fixed.
> >>
> >> Syed, the VM is trying to get the root password from the VR, but it
> can't
> >> connect to it.
> >>
> >> --
> >> Sent from the Delta quadrant using Borg technology!
> >>
> >> Nux!
> >> www.nux.ro
> >>
> >> ----- Original Message -----
> >> > From: "Syed Mushtaq" <sy...@gmail.com>
> >> > To: dev@cloudstack.apache.org
> >> > Sent: Thursday, 25 February, 2016 14:47:17
> >> > Subject: Re: VR metadata unreachable from VPC tier
> >>
> >> > Hi nux,
> >> >
> >> > Just so I understand, what is the metadata that VR sends to a VM?
> >> >
> >> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com>
> >> wrote:
> >> >
> >> >> When you have this issue, if you setup a Portforwarding for ssh for
> the
> >> VM,
> >> >> does the PF rule work?
> >> >>
> >> >> We observed similar issue where VR does not apply or receive configs
> >> pushed
> >> >> by the management-server. I haven't really start investigate that but
> >> >> wondering if you have similar issue. and usually a restart of the VR
> or
> >> >> reset of the VPC fixe the issue.
> >> >>
> >> >>
> >> >> PL
> >> >>
> >> >>
> >> >>
> >> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
> >> >>
> >> >> > Hi,
> >> >> >
> >> >> > Just a quick one, before I go on submitting a bug, apparently my
> VMs
> >> >> > connected in a VPC tier ("allow" acl) cannot get the metadata
> password
> >> >> from
> >> >> > the VR.
> >> >> > It works from normal isolated networks.
> >> >> >
> >> >> > Tested on ACS 4.8, Xen & KVM.
> >> >> >
> >> >> > Has anyone seen this?
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Sent from the Delta quadrant using Borg technology!
> >> >> >
> >> >> > Nux!
> >> >> > www.nux.ro
> >> >> >
>
Re: VR metadata unreachable from VPC tier
Posted by Nux! <nu...@li.nux.ro>.
Deploy new VM.
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
----- Original Message -----
> From: "Syed Mushtaq" <sy...@gmail.com>
> To: dev@cloudstack.apache.org
> Sent: Thursday, 25 February, 2016 15:35:04
> Subject: Re: VR metadata unreachable from VPC tier
> I see thanks. So this happens when you create a new VM or when you try to
> reset password of an already existing VM?
>
> On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
>
>> Hi,
>>
>> I am yet to restart the VR, will do this a bit later on to see if the
>> problems gets fixed.
>>
>> Syed, the VM is trying to get the root password from the VR, but it can't
>> connect to it.
>>
>> --
>> Sent from the Delta quadrant using Borg technology!
>>
>> Nux!
>> www.nux.ro
>>
>> ----- Original Message -----
>> > From: "Syed Mushtaq" <sy...@gmail.com>
>> > To: dev@cloudstack.apache.org
>> > Sent: Thursday, 25 February, 2016 14:47:17
>> > Subject: Re: VR metadata unreachable from VPC tier
>>
>> > Hi nux,
>> >
>> > Just so I understand, what is the metadata that VR sends to a VM?
>> >
>> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com>
>> wrote:
>> >
>> >> When you have this issue, if you setup a Portforwarding for ssh for the
>> VM,
>> >> does the PF rule work?
>> >>
>> >> We observed similar issue where VR does not apply or receive configs
>> pushed
>> >> by the management-server. I haven't really start investigate that but
>> >> wondering if you have similar issue. and usually a restart of the VR or
>> >> reset of the VPC fixe the issue.
>> >>
>> >>
>> >> PL
>> >>
>> >>
>> >>
>> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
>> >>
>> >> > Hi,
>> >> >
>> >> > Just a quick one, before I go on submitting a bug, apparently my VMs
>> >> > connected in a VPC tier ("allow" acl) cannot get the metadata password
>> >> from
>> >> > the VR.
>> >> > It works from normal isolated networks.
>> >> >
>> >> > Tested on ACS 4.8, Xen & KVM.
>> >> >
>> >> > Has anyone seen this?
>> >> >
>> >> >
>> >> > --
>> >> > Sent from the Delta quadrant using Borg technology!
>> >> >
>> >> > Nux!
>> >> > www.nux.ro
>> >> >
Re: VR metadata unreachable from VPC tier
Posted by Syed Mushtaq <sy...@gmail.com>.
I see thanks. So this happens when you create a new VM or when you try to
reset password of an already existing VM?
On Thu, Feb 25, 2016 at 9:49 AM, Nux! <nu...@li.nux.ro> wrote:
> Hi,
>
> I am yet to restart the VR, will do this a bit later on to see if the
> problems gets fixed.
>
> Syed, the VM is trying to get the root password from the VR, but it can't
> connect to it.
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>
> ----- Original Message -----
> > From: "Syed Mushtaq" <sy...@gmail.com>
> > To: dev@cloudstack.apache.org
> > Sent: Thursday, 25 February, 2016 14:47:17
> > Subject: Re: VR metadata unreachable from VPC tier
>
> > Hi nux,
> >
> > Just so I understand, what is the metadata that VR sends to a VM?
> >
> > On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com>
> wrote:
> >
> >> When you have this issue, if you setup a Portforwarding for ssh for the
> VM,
> >> does the PF rule work?
> >>
> >> We observed similar issue where VR does not apply or receive configs
> pushed
> >> by the management-server. I haven't really start investigate that but
> >> wondering if you have similar issue. and usually a restart of the VR or
> >> reset of the VPC fixe the issue.
> >>
> >>
> >> PL
> >>
> >>
> >>
> >> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
> >>
> >> > Hi,
> >> >
> >> > Just a quick one, before I go on submitting a bug, apparently my VMs
> >> > connected in a VPC tier ("allow" acl) cannot get the metadata password
> >> from
> >> > the VR.
> >> > It works from normal isolated networks.
> >> >
> >> > Tested on ACS 4.8, Xen & KVM.
> >> >
> >> > Has anyone seen this?
> >> >
> >> >
> >> > --
> >> > Sent from the Delta quadrant using Borg technology!
> >> >
> >> > Nux!
> >> > www.nux.ro
> >> >
>
Re: VR metadata unreachable from VPC tier
Posted by Nux! <nu...@li.nux.ro>.
Hi,
I am yet to restart the VR, will do this a bit later on to see if the problems gets fixed.
Syed, the VM is trying to get the root password from the VR, but it can't connect to it.
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
----- Original Message -----
> From: "Syed Mushtaq" <sy...@gmail.com>
> To: dev@cloudstack.apache.org
> Sent: Thursday, 25 February, 2016 14:47:17
> Subject: Re: VR metadata unreachable from VPC tier
> Hi nux,
>
> Just so I understand, what is the metadata that VR sends to a VM?
>
> On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com> wrote:
>
>> When you have this issue, if you setup a Portforwarding for ssh for the VM,
>> does the PF rule work?
>>
>> We observed similar issue where VR does not apply or receive configs pushed
>> by the management-server. I haven't really start investigate that but
>> wondering if you have similar issue. and usually a restart of the VR or
>> reset of the VPC fixe the issue.
>>
>>
>> PL
>>
>>
>>
>> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
>>
>> > Hi,
>> >
>> > Just a quick one, before I go on submitting a bug, apparently my VMs
>> > connected in a VPC tier ("allow" acl) cannot get the metadata password
>> from
>> > the VR.
>> > It works from normal isolated networks.
>> >
>> > Tested on ACS 4.8, Xen & KVM.
>> >
>> > Has anyone seen this?
>> >
>> >
>> > --
>> > Sent from the Delta quadrant using Borg technology!
>> >
>> > Nux!
>> > www.nux.ro
>> >
Re: VR metadata unreachable from VPC tier
Posted by Syed Mushtaq <sy...@gmail.com>.
Hi nux,
Just so I understand, what is the metadata that VR sends to a VM?
On Thu, Feb 25, 2016, 9:44 AM Pierre-Luc Dion <pd...@cloudops.com> wrote:
> When you have this issue, if you setup a Portforwarding for ssh for the VM,
> does the PF rule work?
>
> We observed similar issue where VR does not apply or receive configs pushed
> by the management-server. I haven't really start investigate that but
> wondering if you have similar issue. and usually a restart of the VR or
> reset of the VPC fixe the issue.
>
>
> PL
>
>
>
> On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
>
> > Hi,
> >
> > Just a quick one, before I go on submitting a bug, apparently my VMs
> > connected in a VPC tier ("allow" acl) cannot get the metadata password
> from
> > the VR.
> > It works from normal isolated networks.
> >
> > Tested on ACS 4.8, Xen & KVM.
> >
> > Has anyone seen this?
> >
> >
> > --
> > Sent from the Delta quadrant using Borg technology!
> >
> > Nux!
> > www.nux.ro
> >
>
Re: VR metadata unreachable from VPC tier
Posted by Pierre-Luc Dion <pd...@cloudops.com>.
When you have this issue, if you setup a Portforwarding for ssh for the VM,
does the PF rule work?
We observed similar issue where VR does not apply or receive configs pushed
by the management-server. I haven't really start investigate that but
wondering if you have similar issue. and usually a restart of the VR or
reset of the VPC fixe the issue.
PL
On Thu, Feb 25, 2016 at 6:51 AM, Nux! <nu...@li.nux.ro> wrote:
> Hi,
>
> Just a quick one, before I go on submitting a bug, apparently my VMs
> connected in a VPC tier ("allow" acl) cannot get the metadata password from
> the VR.
> It works from normal isolated networks.
>
> Tested on ACS 4.8, Xen & KVM.
>
> Has anyone seen this?
>
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>