You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@myfaces.apache.org by Th...@gad.de on 2008/11/20 15:51:34 UTC

RE: Trouble upgrading from MyFaces 1.1.5 to 1.1.6

Hi,
is there any solution for this problem. I'm running into the same failure 
after upgrading to myfaces 1.1.6.
If I delete the default-render-kit-id section in faces-config.xml, I get 
only the tomahawk-tags to work.

Regards,
Thorsten

>Enabled logging(was enabled already) and removed everything related to 
Tomahawk from web.xml.
>Still no help. it just doesn't work...
>
>S
>
>-----Original Message-----
>From: Simon Kitching [mailto:skitching@apache.org]
>Sent: 31. lokakuuta 2008 13:02
>To: MyFaces Discussion
>Subject: Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
>
>Note that Tomahawk 1.1.7 now includes facelets support natively. So if
>you upgrade tomahawk, make sure you remove the tomahawk entry from the
>facelets.LIBRARIES setting, etc.
>
>Both facelets and Myfaces also generate quite a lot of logging output.
>If you are still having problems, you should enable the logging and
>check the output. Facelets uses java.util.logging while myfaces and
>tomahawk use commons-logging. I don't know what trinidad uses.
>
>Regards,
>Simon
>
>Luhtala Santeri schrieb:
>
> We are using Trinidad 1.0.8.
>
> I just updated to Facelets 1.1.14. Lets see what happens next with the
> MyFaces upgrade...
>
> S
>
> ------------------------------------------------------------------------
>
> *From:* Gerhard Petracek [mailto:gerhard.petracek@gmail.com]
> *Sent:* 31. lokakuuta 2008 12:28
> *To:* MyFaces Discussion
> *Subject:* Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
>
> hello,
>
> you can try to upgrade facelets to version 1.1.14
> which trinidad version are you using?
>
> regards,
> gerhard
>
>
> 2008/10/31 Luhtala Santeri <Santeri.Luhtala@profitsoftware.com
> <ma...@profitsoftware.com>>
>
> Hi
>
> I tried to upgrade from MyFaces 1.1.5 to 1.1.6. <http://1.1.6.>
>
> We have also Facelets 1.1.11 and Trinidad and Tomahawk.
>
> When I upgraded, everything seems fine first. The first page renders
> just fine, but nothing on the page is working.... Commandlinks, buttons
> are not working. There are no error messages in console that would 
help..
>
> We have experienced some similar problems earlier when some
> combination of Tomahawk and Trinidad components have not been a
> 'perfect match'.
>
> But now I tried to strip out all the Tomahawk components from that
> first page and that just didn't have any effect...
>
> FacesTrace didn't help either. Would it help if we upgraded the
> Facelets version? Would we get any better console output in these
> situations?
>
> Any pointers would be great.
>
> S
>
>
>
>
> --
>
> http://www.irian.at
>
> Your JSF powerhouse -
> JSF Consulting, Development and
> Courses in English and German
>
> Professional Support for Apache MyFaces
>

Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6

Posted by "Glauco P. Gomes" <gl...@yahoo.com.br>.
I'm having the same issue, anyone has a solution/workaround to resolve this?

My problematic environment: Tomahawk 1.1.7, Trinidad 1.0.10 and MyFaces 
1.1.6

No problem with: Tomahawk 1.1.7, Trinidad 1.0.10 and MyFaces 1.1.5

Glauco P. Gomes

Luhtala Santeri escreveu:
>
> Still have the same problem. There just isn’t any useful log message 
> to be found…
>
> Now using Tomahawk 1.1.8. and Trinidad 1.0.10 and MyFaces 1.1.5.
>
> S
>
> ------------------------------------------------------------------------
>
> *From:* Thorsten.Balke@gad.de [mailto:Thorsten.Balke@gad.de]
> *Sent:* 20. marraskuuta 2008 16:52
> *To:* users@myfaces.apache.org
> *Subject:* RE: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
>
>
> Hi,
> is there any solution for this problem. I'm running into the same 
> failure after upgrading to myfaces 1.1.6.
> If I delete the default-render-kit-id section in faces-config.xml, I 
> get only the tomahawk-tags to work.
>
> Regards,
> Thorsten
>
> >Enabled logging(was enabled already) and removed everything related 
> to Tomahawk from web.xml.
> >Still no help. it just doesn't work...
> >
> >S
> >
> >-----Original Message-----
> >From: Simon Kitching [mailto:skitching@apache.org]
> >Sent: 31. lokakuuta 2008 13:02
> >To: MyFaces Discussion
> >Subject: Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
> >
> >Note that Tomahawk 1.1.7 now includes facelets support natively. So if
> >you upgrade tomahawk, make sure you remove the tomahawk entry from the
> >facelets.LIBRARIES setting, etc.
> >
> >Both facelets and Myfaces also generate quite a lot of logging output.
> >If you are still having problems, you should enable the logging and
> >check the output. Facelets uses java.util.logging while myfaces and
> >tomahawk use commons-logging. I don't know what trinidad uses.
> >
> >Regards,
> >Simon
> >
> >Luhtala Santeri schrieb:
> >
> > We are using Trinidad 1.0.8.
> >
> > I just updated to Facelets 1.1.14. Lets see what happens next with the
> > MyFaces upgrade...
> >
> > S
> >
> > ------------------------------------------------------------------------
> >
> > *From:* Gerhard Petracek [mailto:gerhard.petracek@gmail.com]
> > *Sent:* 31. lokakuuta 2008 12:28
> > *To:* MyFaces Discussion
> > *Subject:* Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
> >
> > hello,
> >
> > you can try to upgrade facelets to version 1.1.14
> > which trinidad version are you using?
> >
> > regards,
> > gerhard
> >
> >
> > 2008/10/31 Luhtala Santeri <Santeri.Luhtala@profitsoftware.com
> > <ma...@profitsoftware.com>>
> >
> > Hi
> >
> > I tried to upgrade from MyFaces 1.1.5 to 1.1.6. <http://1.1.6.>
> >
> > We have also Facelets 1.1.11 and Trinidad and Tomahawk.
> >
> > When I upgraded, everything seems fine first. The first page renders
> > just fine, but nothing on the page is working.... Commandlinks, buttons
> > are not working. There are no error messages in console that would help..
> >
> > We have experienced some similar problems earlier when some
> > combination of Tomahawk and Trinidad components have not been a
> > 'perfect match'.
> >
> > But now I tried to strip out all the Tomahawk components from that
> > first page and that just didn't have any effect...
> >
> > FacesTrace didn't help either. Would it help if we upgraded the
> > Facelets version? Would we get any better console output in these
> > situations?
> >
> > Any pointers would be great.
> >
> > S
> >
> >
> >
> >
> > --
> >
> > http://www.irian.at
> >
> > Your JSF powerhouse -
> > JSF Consulting, Development and
> > Courses in English and German
> >
> > Professional Support for Apache MyFaces
> >
>

RE: Trouble upgrading from MyFaces 1.1.5 to 1.1.6

Posted by Luhtala Santeri <Sa...@profitsoftware.com>.
Still have the same problem. There just isn't any useful log message to be found...
Now using Tomahawk 1.1.8. and Trinidad 1.0.10 and MyFaces 1.1.5.

S

________________________________
From: Thorsten.Balke@gad.de [mailto:Thorsten.Balke@gad.de]
Sent: 20. marraskuuta 2008 16:52
To: users@myfaces.apache.org
Subject: RE: Trouble upgrading from MyFaces 1.1.5 to 1.1.6


Hi,
is there any solution for this problem. I'm running into the same failure after upgrading to myfaces 1.1.6.
If I delete the default-render-kit-id section in faces-config.xml, I get only the tomahawk-tags to work.

Regards,
Thorsten

>Enabled logging(was enabled already) and removed everything related to Tomahawk from web.xml.
>Still no help. it just doesn't work...
>
>S
>
>-----Original Message-----
>From: Simon Kitching [mailto:skitching@apache.org]
>Sent: 31. lokakuuta 2008 13:02
>To: MyFaces Discussion
>Subject: Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
>
>Note that Tomahawk 1.1.7 now includes facelets support natively. So if
>you upgrade tomahawk, make sure you remove the tomahawk entry from the
>facelets.LIBRARIES setting, etc.
>
>Both facelets and Myfaces also generate quite a lot of logging output.
>If you are still having problems, you should enable the logging and
>check the output. Facelets uses java.util.logging while myfaces and
>tomahawk use commons-logging. I don't know what trinidad uses.
>
>Regards,
>Simon
>
>Luhtala Santeri schrieb:
>
> We are using Trinidad 1.0.8.
>
> I just updated to Facelets 1.1.14. Lets see what happens next with the
> MyFaces upgrade...
>
> S
>
> ------------------------------------------------------------------------
>
> *From:* Gerhard Petracek [mailto:gerhard.petracek@gmail.com]
> *Sent:* 31. lokakuuta 2008 12:28
> *To:* MyFaces Discussion
> *Subject:* Re: Trouble upgrading from MyFaces 1.1.5 to 1.1.6
>
> hello,
>
> you can try to upgrade facelets to version 1.1.14
> which trinidad version are you using?
>
> regards,
> gerhard
>
>
> 2008/10/31 Luhtala Santeri <Santeri.Luhtala@profitsoftware.com
> <ma...@profitsoftware.com>>
>
> Hi
>
> I tried to upgrade from MyFaces 1.1.5 to 1.1.6. <http://1.1.6.>
>
> We have also Facelets 1.1.11 and Trinidad and Tomahawk.
>
> When I upgraded, everything seems fine first. The first page renders
> just fine, but nothing on the page is working.... Commandlinks, buttons
> are not working. There are no error messages in console that would help..
>
> We have experienced some similar problems earlier when some
> combination of Tomahawk and Trinidad components have not been a
> 'perfect match'.
>
> But now I tried to strip out all the Tomahawk components from that
> first page and that just didn't have any effect...
>
> FacesTrace didn't help either. Would it help if we upgraded the
> Facelets version? Would we get any better console output in these
> situations?
>
> Any pointers would be great.
>
> S
>
>
>
>
> --
>
> http://www.irian.at
>
> Your JSF powerhouse -
> JSF Consulting, Development and
> Courses in English and German
>
> Professional Support for Apache MyFaces
>