You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tomcat.apache.org by ZHAO Eric <Er...@alcatel-lucent.com> on 2016/03/12 15:04:59 UTC
Need Help: - jk doesn't work after upgrade to 1.2.40 from 1.2.23
Hello,
I am new to Tomcat Connectors, we are trying to upgrade the existing mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
But we always got the following error in jk.log with 1.2.40, we don't know if anything need to adjust after upgrade to the new version:
[Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug] jk_translate::mod_jk.c (3855): missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
[Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023): missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
Can some one help me out from this issue? Appreciated in advance, the following are the setting, we don't have uriworkermapping.properties file.
Here is our setting for mod_jk:
mod_jk.conf:
<IfModule !mod_jk.c>
LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
</IfModule>
JkWorkersFile /etc/httpd/conf/workers.properties
JkLogFile /var/log/jk.log
# JkLogLevel debug
JkLogLevel warning
JkMount /MIBS ajp12
JkMount /MIBS/* ajp12
...
JkMount /sso csajboss
JkMount /sso/* csajboss
workers.properties:
worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer1,cfmaplayer2,cfmaplayer3
worker.ajp12.port=8007
worker.ajp12.host=localhost
worker.ajp12.type=ajp12
# Added for SOAP NBI
worker.soapnbi.port=8009
worker.soapnbi.host=localhost
worker.soapnbi.type=ajp13
# Added for CSA - JBOSS
worker.csajboss.port=8011
worker.csajboss.host=c04s02h02IBM2
worker.csajboss.type=ajp13
#// next are lb related.
Thanks,
Eric.
RE: [COMMERCIAL] Re: [COMMERCIAL] Re: Need Help: - jk doesn't work
after upgrade to1.2.40 from 1.2.23
Posted by ZHAO Eric <Er...@alcatel-lucent.com>.
Andre,
Martin,
Thanks for your reply:
Answer to your previous question: 1). since the loadbalance haven't been triggered, so I think we can ignore it now.
2). You are right "missing uri map" is a debug information, but in the above code I pasted, it will return DECLINED, which is actually an error case.
3). the hostname doesn’t match with the configuration file, since I modified some conf, so I tried to copy the original one used on 1.2.32. sorry for the confusion.
4). I don't know ajp12, it's not triggered yet in my testing.
I attached the configuration files in my lab, this setting worked if using mod_jk 1.2.23 release. If I replace the mod_jk.so with the version 1.2.40, then it failed to open the page /sso/lsm/lsm.jnlp ( I got "Not Found The requested URL /sso/lsm/lsm.jnlp was not found on this server.").
I opened the debug of mod_jk, I noticed it added into some uri work map and also it can be dumped into jk.log:
[Wed Mar 16 12:47:17.965 2016] [12184:139831250073568] [debug] uri_worker_map_add::jk_uri_worker_map.c (863): exact rule '/sso=csajboss' source 'JkMount' was added
[Wed Mar 16 12:47:17.965 2016] [12184:139831250073568] [debug] uri_worker_map_add::jk_uri_worker_map.c (854): wildchar rule '/sso/*=csajboss' source 'JkMount' was added
...
[Wed Mar 16 12:47:17.974 2016] [12185:139831250073568] [debug] uri_worker_map_dump::jk_uri_worker_map.c (197): NEXT (1) map #10: uri=/sso/* worker=csajboss context=/sso/* source=JkMount type=Wildchar len=6
[Wed Mar 16 12:47:17.974 2016] [12185:139831250073568] [debug] uri_worker_map_dump::jk_uri_worker_map.c (197): NEXT (1) map #20: uri=/sso worker=csajboss context=/sso source=JkMount type=Exact len=4
But later when I tried to open the sso/lsm/lsm.jnlp, it should match the wildchar /sso/* uri map. But it was failed, from the code, it's failed in mod_jk.c jk_translate method()
The conf->wu_map was null(don't know why ??),
if (!conf->uw_map) {
if (JK_IS_DEBUG_LEVEL(conf->log))
jk_log(conf->log, JK_LOG_DEBUG,
"missing uri map for %s:%s",
conf->s->server_hostname ? conf->s->server_hostname : "_default_",
r->uri);
return DECLINED;
}
else {
rule_extension_t *e;
worker = map_uri_to_worker_ext(conf->uw_map, r->uri,
NULL, &e, NULL, conf->log);
rconf->rule_extensions = e;
ap_set_module_config(r->request_config, &jk_module, rconf);
}
Do I need to change some configuration after upgrade to 1.2.40?
Thanks,
Eric.
-----Original Message-----
From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
Sent: Monday, March 14, 2016 7:50 PM
To: Tomcat Users List
Subject: [COMMERCIAL] Re: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to1.2.40 from 1.2.23
Hi Eric.
A couple of things :
1) Martin is right, in the sense that if a "worker" is mentioned in the loadbalancer configuration ("balance_workers"), then normally you should /not/ also list it in the list of individual "workers" in the "worker.list" directive.
2) I am not even sure that you really have a problem : the logfile part that you are showing, shows "[debug]" lines with the "Missing URI map.." messages.
These are not errors (otherwise they would be marked "[error]"), they are trace messages allowing you to figure out what is going on when debugging a problem.
A "missing URI map" just indicates that mod_jk is trying to match the URI of the current request with one of the "JkMount" URI's, and failing *for the worker which it is now trying to match*. That does not necessarily mean that it will fail to match this URI with some other worker.
3) the debug messages show a prefix like "IBM001OAM01:". What does that correspond to ? I do not see this name in the JkMount directives that you show, nor in the part of workers.properties that you show.
4) I am a bit puzzled by this section :
>>> worker.ajp12.port=8007
>>> worker.ajp12.host=localhost
>>> worker.ajp12.type=ajp12
What is this type "ajp12" ? As far as I know, this does not exist, see http://tomcat.apache.org/connectors-doc/reference/workers.html
Mandatory Directives -> type
And finally, do you have a problem, and what is it ?
What really happens when you try to access a URI like "http://(hostname)/sso/lsm/lsm.jnlp" ?
And could you provide a *complete* list of your (Jk*) configuration directives, and a complete content of the workers.properties file ?
And maybe a short description as to what you are trying to achieve.
From what you provided so far, it is not very clear which URI's you want to "load-balance" and which not.
The fact that "it worked before" is no guarantee that what you had before was entirely correct.
On 14.03.2016 11:47, Martin Knoblauch wrote:
> Hi Eric,
>
> there are two things different from *my* working "mod_jk/1.2.41" setup:
>
> a) I have only the "JkMount /xxx/* xxx" line in my configuration
> b) in the workers list I have only the loadbalancer and the management
> workers listed, not the individual ones. Not sure how relevant this is
>
> Martin
>
>
> On Mon, Mar 14, 2016 at 8:24 AM, ZHAO Eric
> <Er...@alcatel-lucent.com>
> wrote:
>
>> Dear Andre,
>>
>> Thanks for your response!
>> We didn't use Virtual Host in our setting. I re-read the
>> documentation and didn't find anything wrong with the setting, also
>> this setting worked before. Do you have several minutes to check the
>> setting in our server for mod_jk? Appreciate for your time.
>>
>> Best Regards,
>> Eric.
>>
>> -----Original Message-----
>> From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
>> Sent: Saturday, March 12, 2016 10:18 PM
>> To: users@tomcat.apache.org
>> Subject: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade
>> to
>> 1.2.40 from 1.2.23
>>
>> On 12.03.2016 15:04, ZHAO Eric wrote:
>>> Hello,
>>>
>>> I am new to Tomcat Connectors, we are trying to upgrade the existing
>> mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
>>>
>>> But we always got the following error in jk.log with 1.2.40, we
>>> don't
>> know if anything need to adjust after upgrade to the new version:
>>> [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug]
>>> jk_translate::mod_jk.c (3855): missing uri map for
>>> IBM001OAM01:/sso/lsm/lsm.jnlp [Thu Mar 10 17:45:10.790 2016]
>>> [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023):
>>> missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
>>>
>>> Can some one help me out from this issue? Appreciated in advance,
>>> the
>> following are the setting, we don't have uriworkermapping.properties file..
>>>
>>> Here is our setting for mod_jk:
>>> mod_jk.conf:
>>> <IfModule !mod_jk.c>
>>> LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
>>> </IfModule>
>>>
>>> JkWorkersFile /etc/httpd/conf/workers.properties
>>> JkLogFile /var/log/jk.log
>>> # JkLogLevel debug
>>> JkLogLevel warning
>>>
>>> JkMount /MIBS ajp12
>>> JkMount /MIBS/* ajp12
>>> ...
>>> JkMount /sso csajboss
>>> JkMount /sso/* csajboss
>>>
>>>
>>> workers.properties:
>>> worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer
>>> 1,
>>> cfmaplayer2,cfmaplayer3
>>>
>>> worker.ajp12.port=8007
>>> worker.ajp12.host=localhost
>>> worker.ajp12.type=ajp12
>>>
>>> # Added for SOAP NBI
>>> worker.soapnbi.port=8009
>>> worker.soapnbi.host=localhost
>>> worker.soapnbi.type=ajp13
>>>
>>> # Added for CSA - JBOSS
>>> worker.csajboss.port=8011
>>> worker.csajboss.host=c04s02h02IBM2
>>> worker.csajboss.type=ajp13
>>>
>>> #// next are lb related.
>>>
>>
>> Does this happen in an Apache httpd VirtualHost ?
>> If yes, make sure that you re-read the configuration documentation at
>> http://tomcat.apache.org/connectors-doc/reference/apache.html
>> and in particular, the sections about JkMount and JkMountCopy.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
RE: [COMMERCIAL] Re: [COMMERCIAL] Re: Need Help: - jk doesn't work
after upgrade to1.2.40 from 1.2.23
Posted by ZHAO Eric <Er...@alcatel-lucent.com>.
Andre,
Martin,
Finally I got the problem fixed after further debugging and code reading, I need to add "JkMountCopy All" in mod_jk.conf, no need any other change on the old release configuration.
Thanks for your help.
Best Regards,
Eric.
-----Original Message-----
From: ZHAO Eric
Sent: Wednesday, March 16, 2016 1:32 PM
To: Tomcat Users List; aw@ice-sa.com; 'knobisoft@gmail.com'
Subject: RE: [COMMERCIAL] Re: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to1.2.40 from 1.2.23
Andre,
Martin,
Thanks for your reply:
Answer to your previous question: 1). since the loadbalance haven't been triggered, so I think we can ignore it now.
2). You are right "missing uri map" is a debug information, but in the above code I pasted, it will return DECLINED, which is actually an error case.
3). the hostname doesn’t match with the configuration file, since I modified some conf, so I tried to copy the original one used on 1.2.32. sorry for the confusion.
4). I don't know ajp12, it's not triggered yet in my testing.
I attached the configuration files in my lab, this setting worked if using mod_jk 1.2.23 release. If I replace the mod_jk.so with the version 1.2.40, then it failed to open the page /sso/lsm/lsm.jnlp ( I got "Not Found The requested URL /sso/lsm/lsm.jnlp was not found on this server.").
I opened the debug of mod_jk, I noticed it added into some uri work map and also it can be dumped into jk.log:
[Wed Mar 16 12:47:17.965 2016] [12184:139831250073568] [debug] uri_worker_map_add::jk_uri_worker_map.c (863): exact rule '/sso=csajboss' source 'JkMount' was added [Wed Mar 16 12:47:17.965 2016] [12184:139831250073568] [debug] uri_worker_map_add::jk_uri_worker_map.c (854): wildchar rule '/sso/*=csajboss' source 'JkMount' was added ...
[Wed Mar 16 12:47:17.974 2016] [12185:139831250073568] [debug] uri_worker_map_dump::jk_uri_worker_map.c (197): NEXT (1) map #10: uri=/sso/* worker=csajboss context=/sso/* source=JkMount type=Wildchar len=6 [Wed Mar 16 12:47:17.974 2016] [12185:139831250073568] [debug] uri_worker_map_dump::jk_uri_worker_map.c (197): NEXT (1) map #20: uri=/sso worker=csajboss context=/sso source=JkMount type=Exact len=4
But later when I tried to open the sso/lsm/lsm.jnlp, it should match the wildchar /sso/* uri map. But it was failed, from the code, it's failed in mod_jk.c jk_translate method() The conf->wu_map was null(don't know why ??),
if (!conf->uw_map) {
if (JK_IS_DEBUG_LEVEL(conf->log))
jk_log(conf->log, JK_LOG_DEBUG,
"missing uri map for %s:%s",
conf->s->server_hostname ? conf->s->server_hostname : "_default_",
r->uri);
return DECLINED;
}
else {
rule_extension_t *e;
worker = map_uri_to_worker_ext(conf->uw_map, r->uri,
NULL, &e, NULL, conf->log);
rconf->rule_extensions = e;
ap_set_module_config(r->request_config, &jk_module, rconf);
}
Do I need to change some configuration after upgrade to 1.2.40?
Thanks,
Eric.
-----Original Message-----
From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
Sent: Monday, March 14, 2016 7:50 PM
To: Tomcat Users List
Subject: [COMMERCIAL] Re: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to1.2.40 from 1.2.23
Hi Eric.
A couple of things :
1) Martin is right, in the sense that if a "worker" is mentioned in the loadbalancer configuration ("balance_workers"), then normally you should /not/ also list it in the list of individual "workers" in the "worker.list" directive.
2) I am not even sure that you really have a problem : the logfile part that you are showing, shows "[debug]" lines with the "Missing URI map.." messages.
These are not errors (otherwise they would be marked "[error]"), they are trace messages allowing you to figure out what is going on when debugging a problem.
A "missing URI map" just indicates that mod_jk is trying to match the URI of the current request with one of the "JkMount" URI's, and failing *for the worker which it is now trying to match*. That does not necessarily mean that it will fail to match this URI with some other worker.
3) the debug messages show a prefix like "IBM001OAM01:". What does that correspond to ? I do not see this name in the JkMount directives that you show, nor in the part of workers.properties that you show.
4) I am a bit puzzled by this section :
>>> worker.ajp12.port=8007
>>> worker.ajp12.host=localhost
>>> worker.ajp12.type=ajp12
What is this type "ajp12" ? As far as I know, this does not exist, see http://tomcat.apache.org/connectors-doc/reference/workers.html
Mandatory Directives -> type
And finally, do you have a problem, and what is it ?
What really happens when you try to access a URI like "http://(hostname)/sso/lsm/lsm.jnlp" ?
And could you provide a *complete* list of your (Jk*) configuration directives, and a complete content of the workers.properties file ?
And maybe a short description as to what you are trying to achieve.
From what you provided so far, it is not very clear which URI's you want to "load-balance" and which not.
The fact that "it worked before" is no guarantee that what you had before was entirely correct.
On 14.03.2016 11:47, Martin Knoblauch wrote:
> Hi Eric,
>
> there are two things different from *my* working "mod_jk/1.2.41" setup:
>
> a) I have only the "JkMount /xxx/* xxx" line in my configuration
> b) in the workers list I have only the loadbalancer and the management
> workers listed, not the individual ones. Not sure how relevant this is
>
> Martin
>
>
> On Mon, Mar 14, 2016 at 8:24 AM, ZHAO Eric
> <Er...@alcatel-lucent.com>
> wrote:
>
>> Dear Andre,
>>
>> Thanks for your response!
>> We didn't use Virtual Host in our setting. I re-read the
>> documentation and didn't find anything wrong with the setting, also
>> this setting worked before. Do you have several minutes to check the
>> setting in our server for mod_jk? Appreciate for your time.
>>
>> Best Regards,
>> Eric.
>>
>> -----Original Message-----
>> From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
>> Sent: Saturday, March 12, 2016 10:18 PM
>> To: users@tomcat.apache.org
>> Subject: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade
>> to
>> 1.2.40 from 1.2.23
>>
>> On 12.03.2016 15:04, ZHAO Eric wrote:
>>> Hello,
>>>
>>> I am new to Tomcat Connectors, we are trying to upgrade the existing
>> mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
>>>
>>> But we always got the following error in jk.log with 1.2.40, we
>>> don't
>> know if anything need to adjust after upgrade to the new version:
>>> [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug]
>>> jk_translate::mod_jk.c (3855): missing uri map for
>>> IBM001OAM01:/sso/lsm/lsm.jnlp [Thu Mar 10 17:45:10.790 2016]
>>> [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023):
>>> missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
>>>
>>> Can some one help me out from this issue? Appreciated in advance,
>>> the
>> following are the setting, we don't have uriworkermapping.properties file..
>>>
>>> Here is our setting for mod_jk:
>>> mod_jk.conf:
>>> <IfModule !mod_jk.c>
>>> LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
>>> </IfModule>
>>>
>>> JkWorkersFile /etc/httpd/conf/workers.properties
>>> JkLogFile /var/log/jk.log
>>> # JkLogLevel debug
>>> JkLogLevel warning
>>>
>>> JkMount /MIBS ajp12
>>> JkMount /MIBS/* ajp12
>>> ...
>>> JkMount /sso csajboss
>>> JkMount /sso/* csajboss
>>>
>>>
>>> workers.properties:
>>> worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer
>>> 1,
>>> cfmaplayer2,cfmaplayer3
>>>
>>> worker.ajp12.port=8007
>>> worker.ajp12.host=localhost
>>> worker.ajp12.type=ajp12
>>>
>>> # Added for SOAP NBI
>>> worker.soapnbi.port=8009
>>> worker.soapnbi.host=localhost
>>> worker.soapnbi.type=ajp13
>>>
>>> # Added for CSA - JBOSS
>>> worker.csajboss.port=8011
>>> worker.csajboss.host=c04s02h02IBM2
>>> worker.csajboss.type=ajp13
>>>
>>> #// next are lb related.
>>>
>>
>> Does this happen in an Apache httpd VirtualHost ?
>> If yes, make sure that you re-read the configuration documentation at
>> http://tomcat.apache.org/connectors-doc/reference/apache.html
>> and in particular, the sections about JkMount and JkMountCopy.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
Re: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to
1.2.40 from 1.2.23
Posted by "André Warnier (tomcat)" <aw...@ice-sa.com>.
Hi Eric.
A couple of things :
1) Martin is right, in the sense that if a "worker" is mentioned in the loadbalancer
configuration ("balance_workers"), then normally you should /not/ also list it in the list
of individual "workers" in the "worker.list" directive.
2) I am not even sure that you really have a problem : the logfile part that you are
showing, shows "[debug]" lines with the "Missing URI map.." messages.
These are not errors (otherwise they would be marked "[error]"), they are trace messages
allowing you to figure out what is going on when debugging a problem.
A "missing URI map" just indicates that mod_jk is trying to match the URI of the current
request with one of the "JkMount" URI's, and failing *for the worker which it is now
trying to match*. That does not necessarily mean that it will fail to match this URI with
some other worker.
3) the debug messages show a prefix like "IBM001OAM01:". What does that correspond to ? I
do not see this name in the JkMount directives that you show, nor in the part of
workers.properties that you show.
4) I am a bit puzzled by this section :
>>> worker.ajp12.port=8007
>>> worker.ajp12.host=localhost
>>> worker.ajp12.type=ajp12
What is this type "ajp12" ? As far as I know, this does not exist, see
http://tomcat.apache.org/connectors-doc/reference/workers.html
Mandatory Directives -> type
And finally, do you have a problem, and what is it ?
What really happens when you try to access a URI like "http://(hostname)/sso/lsm/lsm.jnlp" ?
And could you provide a *complete* list of your (Jk*) configuration directives, and a
complete content of the workers.properties file ?
And maybe a short description as to what you are trying to achieve.
From what you provided so far, it is not very clear which URI's you want to
"load-balance" and which not.
The fact that "it worked before" is no guarantee that what you had before was entirely
correct.
On 14.03.2016 11:47, Martin Knoblauch wrote:
> Hi Eric,
>
> there are two things different from *my* working "mod_jk/1.2.41" setup:
>
> a) I have only the "JkMount /xxx/* xxx" line in my configuration
> b) in the workers list I have only the loadbalancer and the management
> workers listed, not the individual ones. Not sure how relevant this is
>
> Martin
>
>
> On Mon, Mar 14, 2016 at 8:24 AM, ZHAO Eric <Er...@alcatel-lucent.com>
> wrote:
>
>> Dear Andre,
>>
>> Thanks for your response!
>> We didn't use Virtual Host in our setting. I re-read the documentation
>> and didn't find anything wrong with the setting, also this setting worked
>> before. Do you have several minutes to check the setting in our server for
>> mod_jk? Appreciate for your time.
>>
>> Best Regards,
>> Eric.
>>
>> -----Original Message-----
>> From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
>> Sent: Saturday, March 12, 2016 10:18 PM
>> To: users@tomcat.apache.org
>> Subject: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to
>> 1.2.40 from 1.2.23
>>
>> On 12.03.2016 15:04, ZHAO Eric wrote:
>>> Hello,
>>>
>>> I am new to Tomcat Connectors, we are trying to upgrade the existing
>> mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
>>>
>>> But we always got the following error in jk.log with 1.2.40, we don't
>> know if anything need to adjust after upgrade to the new version:
>>> [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug]
>>> jk_translate::mod_jk.c (3855): missing uri map for
>>> IBM001OAM01:/sso/lsm/lsm.jnlp [Thu Mar 10 17:45:10.790 2016]
>>> [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023):
>>> missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
>>>
>>> Can some one help me out from this issue? Appreciated in advance, the
>> following are the setting, we don't have uriworkermapping.properties file..
>>>
>>> Here is our setting for mod_jk:
>>> mod_jk.conf:
>>> <IfModule !mod_jk.c>
>>> LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
>>> </IfModule>
>>>
>>> JkWorkersFile /etc/httpd/conf/workers.properties
>>> JkLogFile /var/log/jk.log
>>> # JkLogLevel debug
>>> JkLogLevel warning
>>>
>>> JkMount /MIBS ajp12
>>> JkMount /MIBS/* ajp12
>>> ...
>>> JkMount /sso csajboss
>>> JkMount /sso/* csajboss
>>>
>>>
>>> workers.properties:
>>> worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer1,
>>> cfmaplayer2,cfmaplayer3
>>>
>>> worker.ajp12.port=8007
>>> worker.ajp12.host=localhost
>>> worker.ajp12.type=ajp12
>>>
>>> # Added for SOAP NBI
>>> worker.soapnbi.port=8009
>>> worker.soapnbi.host=localhost
>>> worker.soapnbi.type=ajp13
>>>
>>> # Added for CSA - JBOSS
>>> worker.csajboss.port=8011
>>> worker.csajboss.host=c04s02h02IBM2
>>> worker.csajboss.type=ajp13
>>>
>>> #// next are lb related.
>>>
>>
>> Does this happen in an Apache httpd VirtualHost ?
>> If yes, make sure that you re-read the configuration documentation at
>> http://tomcat.apache.org/connectors-doc/reference/apache.html
>> and in particular, the sections about JkMount and JkMountCopy.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
Re: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to
1.2.40 from 1.2.23
Posted by Martin Knoblauch <kn...@knobisoft.de>.
Hi Eric,
there are two things different from *my* working "mod_jk/1.2.41" setup:
a) I have only the "JkMount /xxx/* xxx" line in my configuration
b) in the workers list I have only the loadbalancer and the management
workers listed, not the individual ones. Not sure how relevant this is
Martin
On Mon, Mar 14, 2016 at 8:24 AM, ZHAO Eric <Er...@alcatel-lucent.com>
wrote:
> Dear Andre,
>
> Thanks for your response!
> We didn't use Virtual Host in our setting. I re-read the documentation
> and didn't find anything wrong with the setting, also this setting worked
> before. Do you have several minutes to check the setting in our server for
> mod_jk? Appreciate for your time.
>
> Best Regards,
> Eric.
>
> -----Original Message-----
> From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
> Sent: Saturday, March 12, 2016 10:18 PM
> To: users@tomcat.apache.org
> Subject: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to
> 1.2.40 from 1.2.23
>
> On 12.03.2016 15:04, ZHAO Eric wrote:
> > Hello,
> >
> > I am new to Tomcat Connectors, we are trying to upgrade the existing
> mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
> >
> > But we always got the following error in jk.log with 1.2.40, we don't
> know if anything need to adjust after upgrade to the new version:
> > [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug]
> > jk_translate::mod_jk.c (3855): missing uri map for
> > IBM001OAM01:/sso/lsm/lsm.jnlp [Thu Mar 10 17:45:10.790 2016]
> > [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023):
> > missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
> >
> > Can some one help me out from this issue? Appreciated in advance, the
> following are the setting, we don't have uriworkermapping.properties file.
> >
> > Here is our setting for mod_jk:
> > mod_jk.conf:
> > <IfModule !mod_jk.c>
> > LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
> > </IfModule>
> >
> > JkWorkersFile /etc/httpd/conf/workers.properties
> > JkLogFile /var/log/jk.log
> > # JkLogLevel debug
> > JkLogLevel warning
> >
> > JkMount /MIBS ajp12
> > JkMount /MIBS/* ajp12
> > ...
> > JkMount /sso csajboss
> > JkMount /sso/* csajboss
> >
> >
> > workers.properties:
> > worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer1,
> > cfmaplayer2,cfmaplayer3
> >
> > worker.ajp12.port=8007
> > worker.ajp12.host=localhost
> > worker.ajp12.type=ajp12
> >
> > # Added for SOAP NBI
> > worker.soapnbi.port=8009
> > worker.soapnbi.host=localhost
> > worker.soapnbi.type=ajp13
> >
> > # Added for CSA - JBOSS
> > worker.csajboss.port=8011
> > worker.csajboss.host=c04s02h02IBM2
> > worker.csajboss.type=ajp13
> >
> > #// next are lb related.
> >
>
> Does this happen in an Apache httpd VirtualHost ?
> If yes, make sure that you re-read the configuration documentation at
> http://tomcat.apache.org/connectors-doc/reference/apache.html
> and in particular, the sections about JkMount and JkMountCopy.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
>
--
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
RE: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to
1.2.40 from 1.2.23
Posted by ZHAO Eric <Er...@alcatel-lucent.com>.
Dear Andre,
Thanks for your response!
We didn't use Virtual Host in our setting. I re-read the documentation and didn't find anything wrong with the setting, also this setting worked before. Do you have several minutes to check the setting in our server for mod_jk? Appreciate for your time.
Best Regards,
Eric.
-----Original Message-----
From: André Warnier (tomcat) [mailto:aw@ice-sa.com]
Sent: Saturday, March 12, 2016 10:18 PM
To: users@tomcat.apache.org
Subject: [COMMERCIAL] Re: Need Help: - jk doesn't work after upgrade to 1.2.40 from 1.2.23
On 12.03.2016 15:04, ZHAO Eric wrote:
> Hello,
>
> I am new to Tomcat Connectors, we are trying to upgrade the existing mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
>
> But we always got the following error in jk.log with 1.2.40, we don't know if anything need to adjust after upgrade to the new version:
> [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug]
> jk_translate::mod_jk.c (3855): missing uri map for
> IBM001OAM01:/sso/lsm/lsm.jnlp [Thu Mar 10 17:45:10.790 2016]
> [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023):
> missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
>
> Can some one help me out from this issue? Appreciated in advance, the following are the setting, we don't have uriworkermapping.properties file.
>
> Here is our setting for mod_jk:
> mod_jk.conf:
> <IfModule !mod_jk.c>
> LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
> </IfModule>
>
> JkWorkersFile /etc/httpd/conf/workers.properties
> JkLogFile /var/log/jk.log
> # JkLogLevel debug
> JkLogLevel warning
>
> JkMount /MIBS ajp12
> JkMount /MIBS/* ajp12
> ...
> JkMount /sso csajboss
> JkMount /sso/* csajboss
>
>
> workers.properties:
> worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer1,
> cfmaplayer2,cfmaplayer3
>
> worker.ajp12.port=8007
> worker.ajp12.host=localhost
> worker.ajp12.type=ajp12
>
> # Added for SOAP NBI
> worker.soapnbi.port=8009
> worker.soapnbi.host=localhost
> worker.soapnbi.type=ajp13
>
> # Added for CSA - JBOSS
> worker.csajboss.port=8011
> worker.csajboss.host=c04s02h02IBM2
> worker.csajboss.type=ajp13
>
> #// next are lb related.
>
Does this happen in an Apache httpd VirtualHost ?
If yes, make sure that you re-read the configuration documentation at http://tomcat.apache.org/connectors-doc/reference/apache.html
and in particular, the sections about JkMount and JkMountCopy.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
Re: Need Help: - jk doesn't work after upgrade to 1.2.40 from 1.2.23
Posted by "André Warnier (tomcat)" <aw...@ice-sa.com>.
On 12.03.2016 15:04, ZHAO Eric wrote:
> Hello,
>
> I am new to Tomcat Connectors, we are trying to upgrade the existing mod_jk 1.2.23 to 1.2.40 for IPV6 configuration.
>
> But we always got the following error in jk.log with 1.2.40, we don't know if anything need to adjust after upgrade to the new version:
> [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug] jk_translate::mod_jk.c (3855): missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
> [Thu Mar 10 17:45:10.790 2016] [13878:140261127514080] [debug] jk_map_to_storage::mod_jk.c (4023): missing uri map for IBM001OAM01:/sso/lsm/lsm.jnlp
>
> Can some one help me out from this issue? Appreciated in advance, the following are the setting, we don't have uriworkermapping.properties file.
>
> Here is our setting for mod_jk:
> mod_jk.conf:
> <IfModule !mod_jk.c>
> LoadModule jk_module /usr/lib64/httpd/modules/mod_jk.so
> </IfModule>
>
> JkWorkersFile /etc/httpd/conf/workers.properties
> JkLogFile /var/log/jk.log
> # JkLogLevel debug
> JkLogLevel warning
>
> JkMount /MIBS ajp12
> JkMount /MIBS/* ajp12
> ...
> JkMount /sso csajboss
> JkMount /sso/* csajboss
>
>
> workers.properties:
> worker.list=ajp12,soapnbi,csajboss,csawebsso,loadbalancer,cfmaplayer1,cfmaplayer2,cfmaplayer3
>
> worker.ajp12.port=8007
> worker.ajp12.host=localhost
> worker.ajp12.type=ajp12
>
> # Added for SOAP NBI
> worker.soapnbi.port=8009
> worker.soapnbi.host=localhost
> worker.soapnbi.type=ajp13
>
> # Added for CSA - JBOSS
> worker.csajboss.port=8011
> worker.csajboss.host=c04s02h02IBM2
> worker.csajboss.type=ajp13
>
> #// next are lb related.
>
Does this happen in an Apache httpd VirtualHost ?
If yes, make sure that you re-read the configuration documentation
at http://tomcat.apache.org/connectors-doc/reference/apache.html
and in particular, the sections about JkMount and JkMountCopy.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org