You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@ctakes.apache.org by Manna Chang <mc...@foundationmedicine.com> on 2015/05/27 19:41:09 UTC
Error on the command - Running AggregatePlainTextfastUMLSProcessor
I got similar error message when loading AggregatePlainTextfastUMLSProcessor
In addition, I also got the message on the command Prompt:
ERROR UmlsUserApprover - UMLS Account at https://uts-ws.n
.nih.gov/restful/isValidUMLSUser is not valid for user CHANGEME with CHANGEME
However, the username and password have been tested to be correct.
Is there any suggestion for this?
Thanks,
-Manna
This communication and any files transmitted with it may contain information that is considered to be confidential, privileged and exempt from disclosure under applicable law. This message is intended for Foundation Medicine-affiliated use and that of the intended recipient only and may contain information that is protected by Foundation Medicine policies and the HIPAA Privacy Rule, 45 CFR � 164.500. This communication is intended solely for the use of intended recipient. If you are not the intended recipient, you are hereby notified that any use, dissemination or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete this message immediately. Thank you for your cooperation.
RE: Error on the command - Running AggregatePlainTextfastUMLSProcessor
Posted by Manna Chang <mc...@foundationmedicine.com>.
Hi Pei,
I am all set. Please ignore the last message.
Thanks,
-Manna
From: Manna Chang [mailto:mchang@foundationmedicine.com]
Sent: Wednesday, May 27, 2015 3:45 PM
To: user@ctakes.apache.org
Subject: RE: Error on the command - Running AggregatePlainTextfastUMLSProcessor
Hi Pei,
I downloaded the 3.2.2 and run it. However, it still did not solve the problem. The interesting thing is that it did not check my username that I put in the CVD or CPE files. It still looks for user CHANGEME.
INFO UmlsUserApprover - Checking UMLS
ts-ws.nlm.nih.gov/restful/isValidUMLSUser for user CHANGEME
ERROR UmlsUserApprover - UMLS Account at https://uts-ws.n
lm.nih.gov/restful/isValidUMLSUser is not valid for user CHANGEME with CHANGEME
Is there anything else that I could do?
Thanks,
-Manna
From: Pei Chen [mailto:chenpei@apache.org]
Sent: Wednesday, May 27, 2015 1:56 PM
To: user@ctakes.apache.org<ma...@ctakes.apache.org>
Subject: Re: Error on the command - Running AggregatePlainTextfastUMLSProcessor
This has been fixed in 3.2.2 (there's a release candidate for it at:
https://dist.apache.org/repos/dist/dev/ctakes/ctakes-3.2.2-rc2/
)
On Wed, May 27, 2015 at 1:41 PM, Manna Chang <mc...@foundationmedicine.com>> wrote:
I got similar error message when loading AggregatePlainTextfastUMLSProcessor
In addition, I also got the message on the command Prompt:
ERROR UmlsUserApprover - UMLS Account at https://uts-ws.n
.nih.gov/restful/isValidUMLSUser<http://nih.gov/restful/isValidUMLSUser> is not valid for user CHANGEME with CHANGEME
However, the username and password have been tested to be correct.
Is there any suggestion for this?
Thanks,
-Manna
This communication and any files transmitted with it may contain information that is considered to be confidential, privileged and exempt from disclosure under applicable law. This message is intended for Foundation Medicine-affiliated use and that of the intended recipient only and may contain information that is protected by Foundation Medicine policies and the HIPAA Privacy Rule, 45 CFR § 164.500. This communication is intended solely for the use of intended recipient. If you are not the intended recipient, you are hereby notified that any use, dissemination or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete this message immediately. Thank you for your cooperation.
RE: Error on the command - Running AggregatePlainTextfastUMLSProcessor
Posted by Manna Chang <mc...@foundationmedicine.com>.
Hi Pei,
I downloaded the 3.2.2 and run it. However, it still did not solve the problem. The interesting thing is that it did not check my username that I put in the CVD or CPE files. It still looks for user CHANGEME.
INFO UmlsUserApprover - Checking UMLS
ts-ws.nlm.nih.gov/restful/isValidUMLSUser for user CHANGEME
ERROR UmlsUserApprover - UMLS Account at https://uts-ws.n
lm.nih.gov/restful/isValidUMLSUser is not valid for user CHANGEME with CHANGEME
Is there anything else that I could do?
Thanks,
-Manna
From: Pei Chen [mailto:chenpei@apache.org]
Sent: Wednesday, May 27, 2015 1:56 PM
To: user@ctakes.apache.org
Subject: Re: Error on the command - Running AggregatePlainTextfastUMLSProcessor
This has been fixed in 3.2.2 (there's a release candidate for it at:
https://dist.apache.org/repos/dist/dev/ctakes/ctakes-3.2.2-rc2/
)
On Wed, May 27, 2015 at 1:41 PM, Manna Chang <mc...@foundationmedicine.com>> wrote:
I got similar error message when loading AggregatePlainTextfastUMLSProcessor
In addition, I also got the message on the command Prompt:
ERROR UmlsUserApprover - UMLS Account at https://uts-ws.n
.nih.gov/restful/isValidUMLSUser<http://nih.gov/restful/isValidUMLSUser> is not valid for user CHANGEME with CHANGEME
However, the username and password have been tested to be correct.
Is there any suggestion for this?
Thanks,
-Manna
This communication and any files transmitted with it may contain information that is considered to be confidential, privileged and exempt from disclosure under applicable law. This message is intended for Foundation Medicine-affiliated use and that of the intended recipient only and may contain information that is protected by Foundation Medicine policies and the HIPAA Privacy Rule, 45 CFR § 164.500. This communication is intended solely for the use of intended recipient. If you are not the intended recipient, you are hereby notified that any use, dissemination or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete this message immediately. Thank you for your cooperation.
This communication and any files transmitted with it may contain information that is considered to be confidential, privileged and exempt from disclosure under applicable law. This message is intended for Foundation Medicine-affiliated use and that of the intended recipient only and may contain information that is protected by Foundation Medicine policies and the HIPAA Privacy Rule, 45 CFR § 164.500. This communication is intended solely for the use of intended recipient. If you are not the intended recipient, you are hereby notified that any use, dissemination or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete this message immediately. Thank you for your cooperation.
Re: Error on the command - Running AggregatePlainTextfastUMLSProcessor
Posted by Pei Chen <ch...@apache.org>.
This has been fixed in 3.2.2 (there's a release candidate for it at:
https://dist.apache.org/repos/dist/dev/ctakes/ctakes-3.2.2-rc2/
)
On Wed, May 27, 2015 at 1:41 PM, Manna Chang <mc...@foundationmedicine.com>
wrote:
> I got similar error message when loading
> AggregatePlainTextfastUMLSProcessor
>
> In addition, I also got the message on the command Prompt:
>
>
>
> ERROR UmlsUserApprover - UMLS Account at https://uts-ws.n
>
> .nih.gov/restful/isValidUMLSUser is not valid for user CHANGEME with
> CHANGEME
>
>
>
> However, the username and password have been tested to be correct.
>
>
>
> Is there any suggestion for this?
>
>
>
> Thanks,
>
> -Manna
>
> This communication and any files transmitted with it may contain
> information that is considered to be confidential, privileged and exempt
> from disclosure under applicable law. This message is intended for
> Foundation Medicine-affiliated use and that of the intended recipient only
> and may contain information that is protected by Foundation Medicine
> policies and the HIPAA Privacy Rule, 45 CFR § 164.500. This communication
> is intended solely for the use of intended recipient. If you are not the
> intended recipient, you are hereby notified that any use, dissemination or
> copying of this communication is strictly prohibited. If you have received
> this communication in error, please notify the sender immediately and
> delete this message immediately. Thank you for your cooperation.
>