Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

["Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov>]

Hi Nic, thanks for your question and am forwarding to the Apache
OCW list for some more help!

Cheers,
Chris

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Chris Mattmann, Ph.D.
Chief Architect
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 168-519, Mailstop: 168-527
Email: chris.a.mattmann@nasa.gov
WWW:  http://sunset.usc.edu/~mattmann/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Adjunct Associate Professor, Computer Science Department
University of Southern California, Los Angeles, CA 90089 USA
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++






-----Original Message-----
From: Nic <ni...@gmail.com>
Date: Monday, January 12, 2015 at 8:08 AM
To: Chris Mattmann <ch...@nasa.gov>
Subject: New Student - Caltech-JPL Summer School on Big Data Analytics -
Need Help Setting up OCW

>Hi Chris!
>
>I'm really excited for this class, but I'm a little hung up on Day 1
>installations. Long story short, I've setup PyLint and OCW, but OCW
>seems to be unable to find some modules. Could this be because I
>installed files (i suspect anaconda) in the wrong folders?
>
>I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW install
>instructions say that I should be running 12.04. I have 14.10 installed.
>I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
>trouble getting it to boot. Can I run 14.10 with OCW?
>
>I've checked the discussion boards and have done a bit of research
>already, but not much fruit.
>
>Thanks so much and I look forward to hearing from you,
>Nic Pederson
>
>541.953.1520
>@nicpederson
>
>

Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

[Michael Joyce <jo...@apache.org>]

Mkay. Can you please post your entire bashrc (pastebin link would probably
be best) and the output of "conda info"? It doesn't seem to be cooperating
with regards to where it should look for conda packages. I'm thinking
there's some residual config from a previous install or I'm forgetting
something really obvious. Worst case we might need to blow out the entire
Anaconda install and redo it (FUN!). Hopefully it's just something stupid
in a config somewhere we can update.


-- Joyce

On Mon, Jan 12, 2015 at 12:51 PM, nic pederson <ni...@gmail.com>
wrote:

> /home/nic/Learning/climate/anaconda/bin/conda
> On Jan 12, 2015 12:47 PM, "Michael Joyce" <jo...@apache.org> wrote:
>
>> Strange. When you run "which conda" what do you see?
>>
>>
>> -- Joyce
>>
>> On Mon, Jan 12, 2015 at 12:40 PM, nic pederson <ni...@gmail.com>
>> wrote:
>>
>>> That did it! Except now I cannot activate OWC. When I activate, I get a
>>> line like:
>>>
>>> bash: (correct path)/climate/anaconda/bin/conda:
>>> /home/nic/anaconda/bin/python: bad interpreter: no such file or directory
>>>
>>> Thanks again for your help.
>>> Nic
>>> On Jan 12, 2015 12:08 PM, "Michael Joyce" <jo...@apache.org> wrote:
>>>
>>>> No problem Nic,
>>>>
>>>> You should have a line in your bashrc similar to the following.
>>>>
>>>> export PATH=~/Anaconda/bin:$PATH
>>>>
>>>> If you replace the assumed path with the location where Anaconda
>>>> actually is you should be golden. If that doesn't fix if for you though let
>>>> us know.
>>>>
>>>>
>>>> -- Joyce
>>>>
>>>> On Mon, Jan 12, 2015 at 12:00 PM, nic pederson <ni...@gmail.com>
>>>> wrote:
>>>>
>>>>> Thanks guys! That sounds about right. The missing module is numpy when
>>>>> owc is activated. (It's filenames when it's deactivated)... Also, I feel
>>>>> like I may have made a bit of a mess of the file structure in trying to
>>>>> move/reinstall Anaconda a couple times.
>>>>>
>>>>> Thanks for all your help.
>>>>>
>>>>> Nic
>>>>> On Jan 12, 2015 11:23 AM, "Michael Joyce" <jo...@apache.org> wrote:
>>>>>
>>>>>> Hi Nic (and Chris),
>>>>>>
>>>>>> I'm guessing from your question that you are installing onto Ubuntu
>>>>>> with the last release of OCW (0.4). You should be fine on 14.10, the old
>>>>>> scripts were only tested on 12.04 so we list that explicitly. Of course
>>>>>> there is still a possibility that you might run into some problems. If
>>>>>> you're pulling off the latest master then the Ubuntu script is tested on
>>>>>> 12.04 and 14.04. What modules are failing for you? If it's something like
>>>>>> numpy/scipy then you probably have an issue with the location of the
>>>>>> Anaconda bin and your path. This could be a result of Anaconda being
>>>>>> installed in a different spot than expected or it could be a bug in the
>>>>>> install scripts. If you're having problems with some OCW modules not
>>>>>> importing then it probably a problem with the PYTHONPATH not being set as
>>>>>> expected. Let us know what problems you're seeing and I'm sure we can get
>>>>>> it sorted quickly.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -- Joyce
>>>>>>
>>>>>> On Mon, Jan 12, 2015 at 8:10 AM, Mattmann, Chris A (3980) <
>>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>>
>>>>>>> Hi Nic, thanks for your question and am forwarding to the Apache
>>>>>>> OCW list for some more help!
>>>>>>>
>>>>>>> Cheers,
>>>>>>> Chris
>>>>>>>
>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>> Chris Mattmann, Ph.D.
>>>>>>> Chief Architect
>>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>>> WWW:  http://sunset.usc.edu/~mattmann/
>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Nic <ni...@gmail.com>
>>>>>>> Date: Monday, January 12, 2015 at 8:08 AM
>>>>>>> To: Chris Mattmann <ch...@nasa.gov>
>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data
>>>>>>> Analytics -
>>>>>>> Need Help Setting up OCW
>>>>>>>
>>>>>>> >Hi Chris!
>>>>>>> >
>>>>>>> >I'm really excited for this class, but I'm a little hung up on Day 1
>>>>>>> >installations. Long story short, I've setup PyLint and OCW, but OCW
>>>>>>> >seems to be unable to find some modules. Could this be because I
>>>>>>> >installed files (i suspect anaconda) in the wrong folders?
>>>>>>> >
>>>>>>> >I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW
>>>>>>> install
>>>>>>> >instructions say that I should be running 12.04. I have 14.10
>>>>>>> installed.
>>>>>>> >I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
>>>>>>> >trouble getting it to boot. Can I run 14.10 with OCW?
>>>>>>> >
>>>>>>> >I've checked the discussion boards and have done a bit of research
>>>>>>> >already, but not much fruit.
>>>>>>> >
>>>>>>> >Thanks so much and I look forward to hearing from you,
>>>>>>> >Nic Pederson
>>>>>>> >
>>>>>>> >541.953.1520
>>>>>>> >@nicpederson
>>>>>>> >
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>

Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

[nic pederson <ni...@gmail.com>]

/home/nic/Learning/climate/anaconda/bin/conda
On Jan 12, 2015 12:47 PM, "Michael Joyce" <jo...@apache.org> wrote:

> Strange. When you run "which conda" what do you see?
>
>
> -- Joyce
>
> On Mon, Jan 12, 2015 at 12:40 PM, nic pederson <ni...@gmail.com>
> wrote:
>
>> That did it! Except now I cannot activate OWC. When I activate, I get a
>> line like:
>>
>> bash: (correct path)/climate/anaconda/bin/conda:
>> /home/nic/anaconda/bin/python: bad interpreter: no such file or directory
>>
>> Thanks again for your help.
>> Nic
>> On Jan 12, 2015 12:08 PM, "Michael Joyce" <jo...@apache.org> wrote:
>>
>>> No problem Nic,
>>>
>>> You should have a line in your bashrc similar to the following.
>>>
>>> export PATH=~/Anaconda/bin:$PATH
>>>
>>> If you replace the assumed path with the location where Anaconda
>>> actually is you should be golden. If that doesn't fix if for you though let
>>> us know.
>>>
>>>
>>> -- Joyce
>>>
>>> On Mon, Jan 12, 2015 at 12:00 PM, nic pederson <ni...@gmail.com>
>>> wrote:
>>>
>>>> Thanks guys! That sounds about right. The missing module is numpy when
>>>> owc is activated. (It's filenames when it's deactivated)... Also, I feel
>>>> like I may have made a bit of a mess of the file structure in trying to
>>>> move/reinstall Anaconda a couple times.
>>>>
>>>> Thanks for all your help.
>>>>
>>>> Nic
>>>> On Jan 12, 2015 11:23 AM, "Michael Joyce" <jo...@apache.org> wrote:
>>>>
>>>>> Hi Nic (and Chris),
>>>>>
>>>>> I'm guessing from your question that you are installing onto Ubuntu
>>>>> with the last release of OCW (0.4). You should be fine on 14.10, the old
>>>>> scripts were only tested on 12.04 so we list that explicitly. Of course
>>>>> there is still a possibility that you might run into some problems. If
>>>>> you're pulling off the latest master then the Ubuntu script is tested on
>>>>> 12.04 and 14.04. What modules are failing for you? If it's something like
>>>>> numpy/scipy then you probably have an issue with the location of the
>>>>> Anaconda bin and your path. This could be a result of Anaconda being
>>>>> installed in a different spot than expected or it could be a bug in the
>>>>> install scripts. If you're having problems with some OCW modules not
>>>>> importing then it probably a problem with the PYTHONPATH not being set as
>>>>> expected. Let us know what problems you're seeing and I'm sure we can get
>>>>> it sorted quickly.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -- Joyce
>>>>>
>>>>> On Mon, Jan 12, 2015 at 8:10 AM, Mattmann, Chris A (3980) <
>>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>>
>>>>>> Hi Nic, thanks for your question and am forwarding to the Apache
>>>>>> OCW list for some more help!
>>>>>>
>>>>>> Cheers,
>>>>>> Chris
>>>>>>
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Chris Mattmann, Ph.D.
>>>>>> Chief Architect
>>>>>> Instrument Software and Science Data Systems Section (398)
>>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>>> Office: 168-519, Mailstop: 168-527
>>>>>> Email: chris.a.mattmann@nasa.gov
>>>>>> WWW:  http://sunset.usc.edu/~mattmann/
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> Adjunct Associate Professor, Computer Science Department
>>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Nic <ni...@gmail.com>
>>>>>> Date: Monday, January 12, 2015 at 8:08 AM
>>>>>> To: Chris Mattmann <ch...@nasa.gov>
>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data
>>>>>> Analytics -
>>>>>> Need Help Setting up OCW
>>>>>>
>>>>>> >Hi Chris!
>>>>>> >
>>>>>> >I'm really excited for this class, but I'm a little hung up on Day 1
>>>>>> >installations. Long story short, I've setup PyLint and OCW, but OCW
>>>>>> >seems to be unable to find some modules. Could this be because I
>>>>>> >installed files (i suspect anaconda) in the wrong folders?
>>>>>> >
>>>>>> >I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW install
>>>>>> >instructions say that I should be running 12.04. I have 14.10
>>>>>> installed.
>>>>>> >I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
>>>>>> >trouble getting it to boot. Can I run 14.10 with OCW?
>>>>>> >
>>>>>> >I've checked the discussion boards and have done a bit of research
>>>>>> >already, but not much fruit.
>>>>>> >
>>>>>> >Thanks so much and I look forward to hearing from you,
>>>>>> >Nic Pederson
>>>>>> >
>>>>>> >541.953.1520
>>>>>> >@nicpederson
>>>>>> >
>>>>>> >
>>>>>>
>>>>>>
>>>>>
>>>
>

Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

[Michael Joyce <jo...@apache.org>]

Strange. When you run "which conda" what do you see?


-- Joyce

On Mon, Jan 12, 2015 at 12:40 PM, nic pederson <ni...@gmail.com>
wrote:

> That did it! Except now I cannot activate OWC. When I activate, I get a
> line like:
>
> bash: (correct path)/climate/anaconda/bin/conda:
> /home/nic/anaconda/bin/python: bad interpreter: no such file or directory
>
> Thanks again for your help.
> Nic
> On Jan 12, 2015 12:08 PM, "Michael Joyce" <jo...@apache.org> wrote:
>
>> No problem Nic,
>>
>> You should have a line in your bashrc similar to the following.
>>
>> export PATH=~/Anaconda/bin:$PATH
>>
>> If you replace the assumed path with the location where Anaconda actually
>> is you should be golden. If that doesn't fix if for you though let us know.
>>
>>
>> -- Joyce
>>
>> On Mon, Jan 12, 2015 at 12:00 PM, nic pederson <ni...@gmail.com>
>> wrote:
>>
>>> Thanks guys! That sounds about right. The missing module is numpy when
>>> owc is activated. (It's filenames when it's deactivated)... Also, I feel
>>> like I may have made a bit of a mess of the file structure in trying to
>>> move/reinstall Anaconda a couple times.
>>>
>>> Thanks for all your help.
>>>
>>> Nic
>>> On Jan 12, 2015 11:23 AM, "Michael Joyce" <jo...@apache.org> wrote:
>>>
>>>> Hi Nic (and Chris),
>>>>
>>>> I'm guessing from your question that you are installing onto Ubuntu
>>>> with the last release of OCW (0.4). You should be fine on 14.10, the old
>>>> scripts were only tested on 12.04 so we list that explicitly. Of course
>>>> there is still a possibility that you might run into some problems. If
>>>> you're pulling off the latest master then the Ubuntu script is tested on
>>>> 12.04 and 14.04. What modules are failing for you? If it's something like
>>>> numpy/scipy then you probably have an issue with the location of the
>>>> Anaconda bin and your path. This could be a result of Anaconda being
>>>> installed in a different spot than expected or it could be a bug in the
>>>> install scripts. If you're having problems with some OCW modules not
>>>> importing then it probably a problem with the PYTHONPATH not being set as
>>>> expected. Let us know what problems you're seeing and I'm sure we can get
>>>> it sorted quickly.
>>>>
>>>>
>>>>
>>>>
>>>> -- Joyce
>>>>
>>>> On Mon, Jan 12, 2015 at 8:10 AM, Mattmann, Chris A (3980) <
>>>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>>>
>>>>> Hi Nic, thanks for your question and am forwarding to the Apache
>>>>> OCW list for some more help!
>>>>>
>>>>> Cheers,
>>>>> Chris
>>>>>
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> Chris Mattmann, Ph.D.
>>>>> Chief Architect
>>>>> Instrument Software and Science Data Systems Section (398)
>>>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>>>> Office: 168-519, Mailstop: 168-527
>>>>> Email: chris.a.mattmann@nasa.gov
>>>>> WWW:  http://sunset.usc.edu/~mattmann/
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> Adjunct Associate Professor, Computer Science Department
>>>>> University of Southern California, Los Angeles, CA 90089 USA
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Nic <ni...@gmail.com>
>>>>> Date: Monday, January 12, 2015 at 8:08 AM
>>>>> To: Chris Mattmann <ch...@nasa.gov>
>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data Analytics
>>>>> -
>>>>> Need Help Setting up OCW
>>>>>
>>>>> >Hi Chris!
>>>>> >
>>>>> >I'm really excited for this class, but I'm a little hung up on Day 1
>>>>> >installations. Long story short, I've setup PyLint and OCW, but OCW
>>>>> >seems to be unable to find some modules. Could this be because I
>>>>> >installed files (i suspect anaconda) in the wrong folders?
>>>>> >
>>>>> >I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW install
>>>>> >instructions say that I should be running 12.04. I have 14.10
>>>>> installed.
>>>>> >I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
>>>>> >trouble getting it to boot. Can I run 14.10 with OCW?
>>>>> >
>>>>> >I've checked the discussion boards and have done a bit of research
>>>>> >already, but not much fruit.
>>>>> >
>>>>> >Thanks so much and I look forward to hearing from you,
>>>>> >Nic Pederson
>>>>> >
>>>>> >541.953.1520
>>>>> >@nicpederson
>>>>> >
>>>>> >
>>>>>
>>>>>
>>>>
>>

Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

[Michael Joyce <jo...@apache.org>]

No problem Nic,

You should have a line in your bashrc similar to the following.

export PATH=~/Anaconda/bin:$PATH

If you replace the assumed path with the location where Anaconda actually
is you should be golden. If that doesn't fix if for you though let us know.


-- Joyce

On Mon, Jan 12, 2015 at 12:00 PM, nic pederson <ni...@gmail.com>
wrote:

> Thanks guys! That sounds about right. The missing module is numpy when owc
> is activated. (It's filenames when it's deactivated)... Also, I feel like I
> may have made a bit of a mess of the file structure in trying to
> move/reinstall Anaconda a couple times.
>
> Thanks for all your help.
>
> Nic
> On Jan 12, 2015 11:23 AM, "Michael Joyce" <jo...@apache.org> wrote:
>
>> Hi Nic (and Chris),
>>
>> I'm guessing from your question that you are installing onto Ubuntu with
>> the last release of OCW (0.4). You should be fine on 14.10, the old scripts
>> were only tested on 12.04 so we list that explicitly. Of course there is
>> still a possibility that you might run into some problems. If you're
>> pulling off the latest master then the Ubuntu script is tested on 12.04 and
>> 14.04. What modules are failing for you? If it's something like numpy/scipy
>> then you probably have an issue with the location of the Anaconda bin and
>> your path. This could be a result of Anaconda being installed in a
>> different spot than expected or it could be a bug in the install scripts.
>> If you're having problems with some OCW modules not importing then it
>> probably a problem with the PYTHONPATH not being set as expected. Let us
>> know what problems you're seeing and I'm sure we can get it sorted quickly.
>>
>>
>>
>>
>> -- Joyce
>>
>> On Mon, Jan 12, 2015 at 8:10 AM, Mattmann, Chris A (3980) <
>> chris.a.mattmann@jpl.nasa.gov> wrote:
>>
>>> Hi Nic, thanks for your question and am forwarding to the Apache
>>> OCW list for some more help!
>>>
>>> Cheers,
>>> Chris
>>>
>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> Chris Mattmann, Ph.D.
>>> Chief Architect
>>> Instrument Software and Science Data Systems Section (398)
>>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>>> Office: 168-519, Mailstop: 168-527
>>> Email: chris.a.mattmann@nasa.gov
>>> WWW:  http://sunset.usc.edu/~mattmann/
>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> Adjunct Associate Professor, Computer Science Department
>>> University of Southern California, Los Angeles, CA 90089 USA
>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>
>>>
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Nic <ni...@gmail.com>
>>> Date: Monday, January 12, 2015 at 8:08 AM
>>> To: Chris Mattmann <ch...@nasa.gov>
>>> Subject: New Student - Caltech-JPL Summer School on Big Data Analytics -
>>> Need Help Setting up OCW
>>>
>>> >Hi Chris!
>>> >
>>> >I'm really excited for this class, but I'm a little hung up on Day 1
>>> >installations. Long story short, I've setup PyLint and OCW, but OCW
>>> >seems to be unable to find some modules. Could this be because I
>>> >installed files (i suspect anaconda) in the wrong folders?
>>> >
>>> >I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW install
>>> >instructions say that I should be running 12.04. I have 14.10 installed.
>>> >I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
>>> >trouble getting it to boot. Can I run 14.10 with OCW?
>>> >
>>> >I've checked the discussion boards and have done a bit of research
>>> >already, but not much fruit.
>>> >
>>> >Thanks so much and I look forward to hearing from you,
>>> >Nic Pederson
>>> >
>>> >541.953.1520
>>> >@nicpederson
>>> >
>>> >
>>>
>>>
>>

Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

[nic pederson <ni...@gmail.com>]

Thanks guys! That sounds about right. The missing module is numpy when owc
is activated. (It's filenames when it's deactivated)... Also, I feel like I
may have made a bit of a mess of the file structure in trying to
move/reinstall Anaconda a couple times.

Thanks for all your help.

Nic
On Jan 12, 2015 11:23 AM, "Michael Joyce" <jo...@apache.org> wrote:

> Hi Nic (and Chris),
>
> I'm guessing from your question that you are installing onto Ubuntu with
> the last release of OCW (0.4). You should be fine on 14.10, the old scripts
> were only tested on 12.04 so we list that explicitly. Of course there is
> still a possibility that you might run into some problems. If you're
> pulling off the latest master then the Ubuntu script is tested on 12.04 and
> 14.04. What modules are failing for you? If it's something like numpy/scipy
> then you probably have an issue with the location of the Anaconda bin and
> your path. This could be a result of Anaconda being installed in a
> different spot than expected or it could be a bug in the install scripts.
> If you're having problems with some OCW modules not importing then it
> probably a problem with the PYTHONPATH not being set as expected. Let us
> know what problems you're seeing and I'm sure we can get it sorted quickly.
>
>
>
>
> -- Joyce
>
> On Mon, Jan 12, 2015 at 8:10 AM, Mattmann, Chris A (3980) <
> chris.a.mattmann@jpl.nasa.gov> wrote:
>
>> Hi Nic, thanks for your question and am forwarding to the Apache
>> OCW list for some more help!
>>
>> Cheers,
>> Chris
>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Chris Mattmann, Ph.D.
>> Chief Architect
>> Instrument Software and Science Data Systems Section (398)
>> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
>> Office: 168-519, Mailstop: 168-527
>> Email: chris.a.mattmann@nasa.gov
>> WWW:  http://sunset.usc.edu/~mattmann/
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Adjunct Associate Professor, Computer Science Department
>> University of Southern California, Los Angeles, CA 90089 USA
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Nic <ni...@gmail.com>
>> Date: Monday, January 12, 2015 at 8:08 AM
>> To: Chris Mattmann <ch...@nasa.gov>
>> Subject: New Student - Caltech-JPL Summer School on Big Data Analytics -
>> Need Help Setting up OCW
>>
>> >Hi Chris!
>> >
>> >I'm really excited for this class, but I'm a little hung up on Day 1
>> >installations. Long story short, I've setup PyLint and OCW, but OCW
>> >seems to be unable to find some modules. Could this be because I
>> >installed files (i suspect anaconda) in the wrong folders?
>> >
>> >I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW install
>> >instructions say that I should be running 12.04. I have 14.10 installed.
>> >I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
>> >trouble getting it to boot. Can I run 14.10 with OCW?
>> >
>> >I've checked the discussion boards and have done a bit of research
>> >already, but not much fruit.
>> >
>> >Thanks so much and I look forward to hearing from you,
>> >Nic Pederson
>> >
>> >541.953.1520
>> >@nicpederson
>> >
>> >
>>
>>
>

Re: New Student - Caltech-JPL Summer School on Big Data Analytics - Need Help Setting up OCW

[Michael Joyce <jo...@apache.org>]

Hi Nic (and Chris),

I'm guessing from your question that you are installing onto Ubuntu with
the last release of OCW (0.4). You should be fine on 14.10, the old scripts
were only tested on 12.04 so we list that explicitly. Of course there is
still a possibility that you might run into some problems. If you're
pulling off the latest master then the Ubuntu script is tested on 12.04 and
14.04. What modules are failing for you? If it's something like numpy/scipy
then you probably have an issue with the location of the Anaconda bin and
your path. This could be a result of Anaconda being installed in a
different spot than expected or it could be a bug in the install scripts.
If you're having problems with some OCW modules not importing then it
probably a problem with the PYTHONPATH not being set as expected. Let us
know what problems you're seeing and I'm sure we can get it sorted quickly.




-- Joyce

On Mon, Jan 12, 2015 at 8:10 AM, Mattmann, Chris A (3980) <
chris.a.mattmann@jpl.nasa.gov> wrote:

> Hi Nic, thanks for your question and am forwarding to the Apache
> OCW list for some more help!
>
> Cheers,
> Chris
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Chris Mattmann, Ph.D.
> Chief Architect
> Instrument Software and Science Data Systems Section (398)
> NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
> Office: 168-519, Mailstop: 168-527
> Email: chris.a.mattmann@nasa.gov
> WWW:  http://sunset.usc.edu/~mattmann/
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Adjunct Associate Professor, Computer Science Department
> University of Southern California, Los Angeles, CA 90089 USA
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
>
>
> -----Original Message-----
> From: Nic <ni...@gmail.com>
> Date: Monday, January 12, 2015 at 8:08 AM
> To: Chris Mattmann <ch...@nasa.gov>
> Subject: New Student - Caltech-JPL Summer School on Big Data Analytics -
> Need Help Setting up OCW
>
> >Hi Chris!
> >
> >I'm really excited for this class, but I'm a little hung up on Day 1
> >installations. Long story short, I've setup PyLint and OCW, but OCW
> >seems to be unable to find some modules. Could this be because I
> >installed files (i suspect anaconda) in the wrong folders?
> >
> >I'm running Ubuntu 14.10 (Lenovo IdeaPad). I noticed that OCW install
> >instructions say that I should be running 12.04. I have 14.10 installed.
> >I'm trying to wipe and restart Ubuntu with 12.04 now, but am having
> >trouble getting it to boot. Can I run 14.10 with OCW?
> >
> >I've checked the discussion boards and have done a bit of research
> >already, but not much fruit.
> >
> >Thanks so much and I look forward to hearing from you,
> >Nic Pederson
> >
> >541.953.1520
> >@nicpederson
> >
> >
>
>