You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Robert Bilbrey <rb...@runbox.com> on 2014/09/13 20:00:15 UTC

Conference Rooms unavailable

All openmeetings configuration interfaces are available, however when
going to a conference room, the room fails to load. Attached is a screen
shot of the errors that are thrown. Any help you could give would be
appreciated.
Thanks, Bob

Re: Conference Rooms unavailable

Posted by Robert Bilbrey <rb...@runbox.com>.
yes to config xml these changes were made as per the howto:
<rtmpsslport>8443</rtmpsslport>,
<useSSL>yes</useSSL> and
<proxyType>best</proxyType>

I will setup the debug mode.

Thanks, Bob


On 09/13/2014 01:34 PM, Maxim Solodovnik wrote:
> Have you modified config.xml?
> could you run debug version of OM
> 1) find web.xml file (webapps/openmeetings/WEB-INF
> 2) find DEPLOYMENT change to DEVELOPMENT
> check client logs
>
> On 14 September 2014 01:31, Robert Bilbrey <rbilbrey@runbox.com
> <ma...@runbox.com>> wrote:
>
>     Hi Maxim, version 3.0.3 , the logs look ok from what I can tell, the
>     pastebin of the logs is http://pastebin.com/vN4Wizm0.
>     Thanks, Bob
>
>
>
>
>     On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
>     > What version are you using?
>     > Is there anything in the logs?
>     >
>     > On 14 September 2014 01:00, Robert Bilbrey <rbilbrey@runbox.com
>     <ma...@runbox.com>
>     > <mailto:rbilbrey@runbox.com <ma...@runbox.com>>> wrote:
>     >
>     >     All openmeetings configuration interfaces are available,
>     however when
>     >     going to a conference room, the room fails to load. Attached
>     is a
>     >     screen
>     >     shot of the errors that are thrown. Any help you could give
>     would be
>     >     appreciated.
>     >     Thanks, Bob
>     >
>     >
>     >
>     >
>     > --
>     > WBR
>     > Maxim aka solomax
>
>
>
>
>
> -- 
> WBR
> Maxim aka solomax


Re: Conference Rooms unavailable

Posted by Maxim Solodovnik <so...@gmail.com>.
Chrome _might_ use the same player, but it uses it's own player by default
Will wait for Tiago's answer/investigation

On 16 September 2014 22:54, Robert Bilbrey <rb...@runbox.com> wrote:

> Hi Max, I was poking around and found this
> ,
> http://helpx.adobe.com/flash-player/kb/enable-system-flash-player-google-chrome.html
> , it would seem that Chrome uses the same flash player as FF and IE. So
> it must be something else that is causing the issue? What do you think?
> Thanks, Bob
>
> On 09/14/2014 11:47 PM, Maxim Solodovnik wrote:
> > Have asked Red5
> > developes:
> https://groups.google.com/forum/?fromgroups=#!topic/red5interest/Qco2TT70xug
> > <
> https://groups.google.com/forum/?fromgroups=#%21topic/red5interest/Qco2TT70xug
> >
> >
> > Maybe they can help ....
> >
> > On 14 September 2014 02:02, Maxim Solodovnik <solomax666@gmail.com
> > <ma...@gmail.com>> wrote:
> >
> >     I would like see client debug output (not server)
> >     please create account, will try to to take a look at it
> >
> >     On 14 September 2014 01:49, Robert Bilbrey <rbilbrey@runbox.com
> >     <ma...@runbox.com>> wrote:
> >
> >         The output from the console is here,
> >         http://pastebin.com/xTmfp4Ss . If
> >         it would be helpful, I could create an account for you to be
> >         able to see
> >         the actual debuggers on the canvas.
> >
> >         On 09/13/2014 01:34 PM, Maxim Solodovnik wrote:
> >         > Have you modified config.xml?
> >         > could you run debug version of OM
> >         > 1) find web.xml file (webapps/openmeetings/WEB-INF
> >         > 2) find DEPLOYMENT change to DEVELOPMENT
> >         > check client logs
> >         >
> >         > On 14 September 2014 01:31, Robert Bilbrey
> >         <rbilbrey@runbox.com <ma...@runbox.com>
> >         > <mailto:rbilbrey@runbox.com <ma...@runbox.com>>>
> >         wrote:
> >         >
> >         >     Hi Maxim, version 3.0.3 , the logs look ok from what I
> >         can tell, the
> >         >     pastebin of the logs is http://pastebin.com/vN4Wizm0.
> >         >     Thanks, Bob
> >         >
> >         >
> >         >
> >         >
> >         >     On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
> >         >     > What version are you using?
> >         >     > Is there anything in the logs?
> >         >     >
> >         >     > On 14 September 2014 01:00, Robert Bilbrey
> >         <rbilbrey@runbox.com <ma...@runbox.com>
> >         >     <mailto:rbilbrey@runbox.com <ma...@runbox.com>>
> >         >     > <mailto:rbilbrey@runbox.com
> >         <ma...@runbox.com> <mailto:rbilbrey@runbox.com
> >         <ma...@runbox.com>>>> wrote:
> >         >     >
> >         >     >     All openmeetings configuration interfaces are
> >         available,
> >         >     however when
> >         >     >     going to a conference room, the room fails to
> >         load. Attached
> >         >     is a
> >         >     >     screen
> >         >     >     shot of the errors that are thrown. Any help you
> >         could give
> >         >     would be
> >         >     >     appreciated.
> >         >     >     Thanks, Bob
> >         >     >
> >         >     >
> >         >     >
> >         >     >
> >         >     > --
> >         >     > WBR
> >         >     > Maxim aka solomax
> >         >
> >         >
> >         >
> >         >
> >         >
> >         > --
> >         > WBR
> >         > Maxim aka solomax
> >
> >
> >
> >
> >     --
> >     WBR
> >     Maxim aka solomax
> >
> >
> >
> >
> > --
> > WBR
> > Maxim aka solomax
>
> --
> Robert Bilbrey, CISSP , PMP
> DD:931-879-8248
> Cell: 530-526-8605
>
> If you wish to message me privately, my public key is :
> -----BEGIN PGP PUBLIC KEY BLOCK-----
> Version: GnuPG v1
>
> mQINBFPfpagBEACzAY+PikqfHQTnd1RVKPfLqXoTuRh3mWAVdKg4wMlwStrgVA5g
> m8bZ4+x2SJpGUk9SdLY3mWxxSSadt9NWxp13YAKR38yQN+lyNg+gF+26oZanTyva
> SQEP0C5qMsd5VP3YLb+pzpv8zv3/y5+MmM1s8ckxiPChTkfqG1fxLj7dUjG1Zwew
> MQYVrybGTXy7R8po0geQIdSTXCfFhxEMcVRpblS5RqJ938GWO1aVO6uRGyDesczF
> jr+SG4kSzn0LCKn9Uc560+RnRU52euVybRBp4UYI/hlIFEONMn9fWwhmsJ/OZq9E
> 1K/5xXDhmSb6v/6Buk7NU5+bFpHm2sHviRsTfbaokqFijjYlq8t7NwizlX44fUAt
> aJz2fzE+kaqwAbXjNrxF3EpLNRATFC3c86Rn6G1FVSKqgr81bh7bUyoZm9d3CrtZ
> EUPlN5RqKqYKpOeuKlwiIYHzrBeIefAFmiEvVjC0cjPocznPmm7DBZHjEkBDBfYB
> WxMB3PFVWIWWIXWr19OapLz1D/lx7MT71Ev5QqA+ZWv7zu0yha72N6IHUoChhaCA
> CtAd4c5L7LG9LzzNtTVHFkXyrwEDWYZosLwPbSwQ7sPYmHu+PKwC4XZA0wAlphyy
> MFt2mgFuD9KTIseky3Ppjv9S+KDpJwFB5yUK085iD/72H7Ec0gXMNkYJ6QARAQAB
> tCRSb2JlcnQgQmlsYnJleSA8cmJpbGJyZXlAcnVuYm94LmNvbT6JAjgEEwECACIF
> AlPfpagCGy8GCwkIBwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEPF9ErdkSkGBO8UQ
> AJUie7A7Xkjrvt6VVLQyT/+Oly2gHOHVb6Au8hKDuJPONHm2/6llm+bl7Rm3jwcv
> 8+W759CMSDM10DZBGmgNwDJeYSuLIkIT2cDMBjWsURj4TzHOWAPMouTnUMVWfsu5
> 2b+cUMtaiErTnIevcxIuBoBsAokYTgYH1rLx5FQvQ5tx5mbhyWqgZXnRg4pNq9f+
> CnciO+gAL5lQzjAjXhn4jQra9XXoz4MeyTFkTwdoYn74TBAjUCYAsUn47zyzMpdW
> 6/kzoCZ3uCUAlgTYIbJMXyjXog7CW+CYgt3UaKl3zph5HWnXRgg5+YNKWyHZ3DT3
> 28HLEgqlibTlTS6x6rP3cqdtbO+80zs6GPKXmAk59cchEReakitxUEKpBOY7yZSx
> CKWCGJ+CYGtSGZTuPOBug28zKYraFHhl7mGl/zVXa9t+zN8qU46hpa5hA+d6spbq
> OdWFimhJJzx8uB07efNsYR44opuAE1n1QYoYprJo/Kg/6CfNyasnPeQdbp87RA00
> EDcBrJnkRRj2Fv6aDYyxzo+KaCXwwrGnN8I7gS2Lz5/W4NNLfZkzpDUm6luJgvOn
> 05n/vYjYPUFwagh5Rrb1rHcR9sObFdnuWfyu0dREU+Ukv4EeoSLwYm+gUOeZSguS
> TZfAbcJn8c/Hjh/0o4enlOLKSerlGKQTIjaSKD8mPp1DuQINBFPfpagBEADHFIjB
> GYNTMAKZ7CluFeChrs0OHJMUJ3t+TTjOAtCDVRrd+BgTjK6VJ2D8T/U6eVCnA4XY
> KJO8toLtkmUHckbOH5vmT7mVkm8BYCYJorB9cOUJ/j9mWBh3H7Qm4mbzuqXzG5qx
> MnjBpxdhErnXi7qzTGZ6eVbOAZYLTPP7q8esiM2jlSDcaB7LNW/wID3NI501ZEjv
> j57IRDXKItAIr6H/lClSzd0qpkg3sdXxJbRMxAr3mh+OL3PpsUM0lC1MEYnI00MV
> UYEDiSUap7VURz+baw2c/JPFAMbIpkB2GsT8/Ry7W2axxQlghvONLhINB2CZLVdT
> F+1PPOo3RlY6RBCxFh6WCfAv1xlyNFn5iVly1qSXpg+mLCWyPi+MTbRzoT56FQCv
> 04LswW4OfMjoAp/Y4aJph86atBpcI1xoVsk7+bgUtgQjNGdJaWwNXvpU1mqZ+wFo
> BTRwoJPyIw5dy+VhviTIEFuZbolz9aOuyba8RBboSBf4WOy2HP3uNcIV3cGviGPr
> C9J25aecB6L7Nv/IJ+3pAGir26CIJRCheRwspzers+qBNrJBBrI+PdEcek7naHRm
> nJMCD7vkNKjminU+cGX0Iug9ylyczT2Ifyn3YtiFpy7ODlkKrLg8XdaH3c4PW10Q
> p4FyroyLqslHSWM8dqVuGHjfXnFDlXqs1GC3WQARAQABiQQ+BBgBAgAJBQJT36Wo
> AhsuAikJEPF9ErdkSkGBwV0gBBkBAgAGBQJT36WoAAoJEGjvMnSuEH0vC8IP/0t4
> YWbHwiMe+j9fyxjEOOqAljTZfxi7wCkV9skHtyhfKAOCSVU6wjUBNG5HantNBK8M
> TZDQ6zeuxFrd6S2fOL40GSKfjmTCB/2ez9Uirk5/aVrdGUA8ydzlORXVFvYiXTTO
> OjftGlLivs/T91buJEqufUUz6bG6/NYcjiUOAOfUVfngVcUEM6MPyKlAM8rijU1T
> F+yUXqBtf0Rye3RFEW4k0xnVqbdk6qX9fBbN6Ul2CnutYx7IR9pwdzgziQ0XttlZ
> FsCMdi8pptyAINi9+4pEhJ3uDwAsB44mkVfBsuscPre3HEXZGDxxhUaedojRfSuH
> k5a/vSq8+stBfaK218eHxSEJJWqbJf7E7+W+pPoYi0pt1oEUN5cY0awNa9COYFaF
> YVBJCWwlkT6QAm8Y7eS2Z+Z2pXEN3mllwKJirYXmVFkI6e7/tcFckFS/CZuo49fn
> BSj9rGOvS9PDq51vey/xi6kCMuEXLUzFtyfbGSFs9eTP/CIE/+YIMFncZdts+DDQ
> UxOk7KcsorMdMFQvUFIaq13TbcVRfiOaUh4eyKzK7ewnaWTWtWZYJN7i/KP37Pvj
> 7FeQ5M2jnxRvgGAUtqNa7YoAIa2FukDgquD7w+hrc6xWZPOq4ZQonmpohnuORcoa
> a2okf7xe4VkRbZp1nfcwvtx/ZkbaDS4SaRTqghpdOkQP/jn8AHSbSVDsECC9JE3G
> 5//fnFzctaKFteUskupHGLGnJchoZ00IPzqQ7Oy9OzzxLpfsJSvb7O2XPIgwVfqz
> 0+KYBqUhMwqhyjdXPHmup/F3/aDa+dMTTbzh7cIcs9I5fg501u395sNoKPw/3ix3
> Rx4lUH8RXHqfj0wG0apmbFW4SgOlqa0P1f46qKjCQYqCe4C9A3ZSL9esugEqTYhF
> mXJibnkqR2AC/y9kpHxn6Ol0/9691W8oAUFsKRwUNPzV90ZHdcMQTe2Mjc+qrSl3
> SqwNbSGZJ9zYrjUw6Xc/sBOaLF4Nta4CKnrIt2ciQjcwJNohgn0ShG/BF+4PlA9v
> vT+HSk4aCl8MYoGH6P8Vs+lVNqccV2QdXoKBSxkSMbo+5u8wMUaN1vrq6q4911HL
> gkPULZoXpJUozQvH45S0WcwKkcEdQA4yGR0E3cvcijqwiXWrYbuOEJyXpqLc/eNc
> dUnjWz7Wjoz3ZnBAU/JT0qZeyZRLGXwqinFlDbBZf0WdKXXOtTg5dBC3Qujown05
> /4/6W5GngB8y+A3xSZcxNcLQG67LyTFgz2KXjGIxsObDchEKOuue472YcShnGiaM
> a9Sr0aNNhDAh9hyoizmL9Fr51DVUadj/pdacr4yIUnn8ffXqKbO9A25PXSdy+7Bw
> 9Si5OrXw/GIMeuNlGtGSkoQ4
> =i5FT
> -----END PGP PUBLIC KEY BLOCK-----
>
>


-- 
WBR
Maxim aka solomax

Re: Conference Rooms unavailable

Posted by Robert Bilbrey <rb...@runbox.com>.
Hi Max, I was poking around and found this
,http://helpx.adobe.com/flash-player/kb/enable-system-flash-player-google-chrome.html
, it would seem that Chrome uses the same flash player as FF and IE. So
it must be something else that is causing the issue? What do you think?
Thanks, Bob

On 09/14/2014 11:47 PM, Maxim Solodovnik wrote:
> Have asked Red5
> developes: https://groups.google.com/forum/?fromgroups=#!topic/red5interest/Qco2TT70xug
> <https://groups.google.com/forum/?fromgroups=#%21topic/red5interest/Qco2TT70xug>
>
> Maybe they can help ....
>
> On 14 September 2014 02:02, Maxim Solodovnik <solomax666@gmail.com
> <ma...@gmail.com>> wrote:
>
>     I would like see client debug output (not server)
>     please create account, will try to to take a look at it
>
>     On 14 September 2014 01:49, Robert Bilbrey <rbilbrey@runbox.com
>     <ma...@runbox.com>> wrote:
>
>         The output from the console is here,
>         http://pastebin.com/xTmfp4Ss . If
>         it would be helpful, I could create an account for you to be
>         able to see
>         the actual debuggers on the canvas.
>
>         On 09/13/2014 01:34 PM, Maxim Solodovnik wrote:
>         > Have you modified config.xml?
>         > could you run debug version of OM
>         > 1) find web.xml file (webapps/openmeetings/WEB-INF
>         > 2) find DEPLOYMENT change to DEVELOPMENT
>         > check client logs
>         >
>         > On 14 September 2014 01:31, Robert Bilbrey
>         <rbilbrey@runbox.com <ma...@runbox.com>
>         > <mailto:rbilbrey@runbox.com <ma...@runbox.com>>>
>         wrote:
>         >
>         >     Hi Maxim, version 3.0.3 , the logs look ok from what I
>         can tell, the
>         >     pastebin of the logs is http://pastebin.com/vN4Wizm0.
>         >     Thanks, Bob
>         >
>         >
>         >
>         >
>         >     On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
>         >     > What version are you using?
>         >     > Is there anything in the logs?
>         >     >
>         >     > On 14 September 2014 01:00, Robert Bilbrey
>         <rbilbrey@runbox.com <ma...@runbox.com>
>         >     <mailto:rbilbrey@runbox.com <ma...@runbox.com>>
>         >     > <mailto:rbilbrey@runbox.com
>         <ma...@runbox.com> <mailto:rbilbrey@runbox.com
>         <ma...@runbox.com>>>> wrote:
>         >     >
>         >     >     All openmeetings configuration interfaces are
>         available,
>         >     however when
>         >     >     going to a conference room, the room fails to
>         load. Attached
>         >     is a
>         >     >     screen
>         >     >     shot of the errors that are thrown. Any help you
>         could give
>         >     would be
>         >     >     appreciated.
>         >     >     Thanks, Bob
>         >     >
>         >     >
>         >     >
>         >     >
>         >     > --
>         >     > WBR
>         >     > Maxim aka solomax
>         >
>         >
>         >
>         >
>         >
>         > --
>         > WBR
>         > Maxim aka solomax
>
>
>
>
>     -- 
>     WBR
>     Maxim aka solomax
>
>
>
>
> -- 
> WBR
> Maxim aka solomax

-- 
Robert Bilbrey, CISSP , PMP
DD:931-879-8248
Cell: 530-526-8605

If you wish to message me privately, my public key is :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1
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=i5FT
-----END PGP PUBLIC KEY BLOCK-----


Re: Conference Rooms unavailable

Posted by Maxim Solodovnik <so...@gmail.com>.
Have asked Red5 developes:
https://groups.google.com/forum/?fromgroups=#!topic/red5interest/Qco2TT70xug
Maybe they can help ....

On 14 September 2014 02:02, Maxim Solodovnik <so...@gmail.com> wrote:

> I would like see client debug output (not server)
> please create account, will try to to take a look at it
>
> On 14 September 2014 01:49, Robert Bilbrey <rb...@runbox.com> wrote:
>
>> The output from the console is here, http://pastebin.com/xTmfp4Ss . If
>> it would be helpful, I could create an account for you to be able to see
>> the actual debuggers on the canvas.
>>
>> On 09/13/2014 01:34 PM, Maxim Solodovnik wrote:
>> > Have you modified config.xml?
>> > could you run debug version of OM
>> > 1) find web.xml file (webapps/openmeetings/WEB-INF
>> > 2) find DEPLOYMENT change to DEVELOPMENT
>> > check client logs
>> >
>> > On 14 September 2014 01:31, Robert Bilbrey <rbilbrey@runbox.com
>> > <ma...@runbox.com>> wrote:
>> >
>> >     Hi Maxim, version 3.0.3 , the logs look ok from what I can tell, the
>> >     pastebin of the logs is http://pastebin.com/vN4Wizm0.
>> >     Thanks, Bob
>> >
>> >
>> >
>> >
>> >     On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
>> >     > What version are you using?
>> >     > Is there anything in the logs?
>> >     >
>> >     > On 14 September 2014 01:00, Robert Bilbrey <rbilbrey@runbox.com
>> >     <ma...@runbox.com>
>> >     > <mailto:rbilbrey@runbox.com <ma...@runbox.com>>> wrote:
>> >     >
>> >     >     All openmeetings configuration interfaces are available,
>> >     however when
>> >     >     going to a conference room, the room fails to load. Attached
>> >     is a
>> >     >     screen
>> >     >     shot of the errors that are thrown. Any help you could give
>> >     would be
>> >     >     appreciated.
>> >     >     Thanks, Bob
>> >     >
>> >     >
>> >     >
>> >     >
>> >     > --
>> >     > WBR
>> >     > Maxim aka solomax
>> >
>> >
>> >
>> >
>> >
>> > --
>> > WBR
>> > Maxim aka solomax
>>
>>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Re: Conference Rooms unavailable

Posted by Maxim Solodovnik <so...@gmail.com>.
I would like see client debug output (not server)
please create account, will try to to take a look at it

On 14 September 2014 01:49, Robert Bilbrey <rb...@runbox.com> wrote:

> The output from the console is here, http://pastebin.com/xTmfp4Ss . If
> it would be helpful, I could create an account for you to be able to see
> the actual debuggers on the canvas.
>
> On 09/13/2014 01:34 PM, Maxim Solodovnik wrote:
> > Have you modified config.xml?
> > could you run debug version of OM
> > 1) find web.xml file (webapps/openmeetings/WEB-INF
> > 2) find DEPLOYMENT change to DEVELOPMENT
> > check client logs
> >
> > On 14 September 2014 01:31, Robert Bilbrey <rbilbrey@runbox.com
> > <ma...@runbox.com>> wrote:
> >
> >     Hi Maxim, version 3.0.3 , the logs look ok from what I can tell, the
> >     pastebin of the logs is http://pastebin.com/vN4Wizm0.
> >     Thanks, Bob
> >
> >
> >
> >
> >     On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
> >     > What version are you using?
> >     > Is there anything in the logs?
> >     >
> >     > On 14 September 2014 01:00, Robert Bilbrey <rbilbrey@runbox.com
> >     <ma...@runbox.com>
> >     > <mailto:rbilbrey@runbox.com <ma...@runbox.com>>> wrote:
> >     >
> >     >     All openmeetings configuration interfaces are available,
> >     however when
> >     >     going to a conference room, the room fails to load. Attached
> >     is a
> >     >     screen
> >     >     shot of the errors that are thrown. Any help you could give
> >     would be
> >     >     appreciated.
> >     >     Thanks, Bob
> >     >
> >     >
> >     >
> >     >
> >     > --
> >     > WBR
> >     > Maxim aka solomax
> >
> >
> >
> >
> >
> > --
> > WBR
> > Maxim aka solomax
>
>


-- 
WBR
Maxim aka solomax

Re: Conference Rooms unavailable

Posted by Robert Bilbrey <rb...@runbox.com>.
The output from the console is here, http://pastebin.com/xTmfp4Ss . If
it would be helpful, I could create an account for you to be able to see
the actual debuggers on the canvas.

On 09/13/2014 01:34 PM, Maxim Solodovnik wrote:
> Have you modified config.xml?
> could you run debug version of OM
> 1) find web.xml file (webapps/openmeetings/WEB-INF
> 2) find DEPLOYMENT change to DEVELOPMENT
> check client logs
>
> On 14 September 2014 01:31, Robert Bilbrey <rbilbrey@runbox.com
> <ma...@runbox.com>> wrote:
>
>     Hi Maxim, version 3.0.3 , the logs look ok from what I can tell, the
>     pastebin of the logs is http://pastebin.com/vN4Wizm0.
>     Thanks, Bob
>
>
>
>
>     On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
>     > What version are you using?
>     > Is there anything in the logs?
>     >
>     > On 14 September 2014 01:00, Robert Bilbrey <rbilbrey@runbox.com
>     <ma...@runbox.com>
>     > <mailto:rbilbrey@runbox.com <ma...@runbox.com>>> wrote:
>     >
>     >     All openmeetings configuration interfaces are available,
>     however when
>     >     going to a conference room, the room fails to load. Attached
>     is a
>     >     screen
>     >     shot of the errors that are thrown. Any help you could give
>     would be
>     >     appreciated.
>     >     Thanks, Bob
>     >
>     >
>     >
>     >
>     > --
>     > WBR
>     > Maxim aka solomax
>
>
>
>
>
> -- 
> WBR
> Maxim aka solomax


Re: Conference Rooms unavailable

Posted by Maxim Solodovnik <so...@gmail.com>.
Have you modified config.xml?
could you run debug version of OM
1) find web.xml file (webapps/openmeetings/WEB-INF
2) find DEPLOYMENT change to DEVELOPMENT
check client logs

On 14 September 2014 01:31, Robert Bilbrey <rb...@runbox.com> wrote:

> Hi Maxim, version 3.0.3 , the logs look ok from what I can tell, the
> pastebin of the logs is http://pastebin.com/vN4Wizm0.
> Thanks, Bob
>
>
>
>
> On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
> > What version are you using?
> > Is there anything in the logs?
> >
> > On 14 September 2014 01:00, Robert Bilbrey <rbilbrey@runbox.com
> > <ma...@runbox.com>> wrote:
> >
> >     All openmeetings configuration interfaces are available, however when
> >     going to a conference room, the room fails to load. Attached is a
> >     screen
> >     shot of the errors that are thrown. Any help you could give would be
> >     appreciated.
> >     Thanks, Bob
> >
> >
> >
> >
> > --
> > WBR
> > Maxim aka solomax
>
>
>


-- 
WBR
Maxim aka solomax

Re: Conference Rooms unavailable

Posted by Robert Bilbrey <rb...@runbox.com>.
Hi Maxim, version 3.0.3 , the logs look ok from what I can tell, the
pastebin of the logs is http://pastebin.com/vN4Wizm0.
Thanks, Bob




On 09/13/2014 01:03 PM, Maxim Solodovnik wrote:
> What version are you using?
> Is there anything in the logs?
>
> On 14 September 2014 01:00, Robert Bilbrey <rbilbrey@runbox.com
> <ma...@runbox.com>> wrote:
>
>     All openmeetings configuration interfaces are available, however when
>     going to a conference room, the room fails to load. Attached is a
>     screen
>     shot of the errors that are thrown. Any help you could give would be
>     appreciated.
>     Thanks, Bob
>
>
>
>
> -- 
> WBR
> Maxim aka solomax



Re: Conference Rooms unavailable

Posted by Maxim Solodovnik <so...@gmail.com>.
What version are you using?
Is there anything in the logs?

On 14 September 2014 01:00, Robert Bilbrey <rb...@runbox.com> wrote:

> All openmeetings configuration interfaces are available, however when
> going to a conference room, the room fails to load. Attached is a screen
> shot of the errors that are thrown. Any help you could give would be
> appreciated.
> Thanks, Bob
>



-- 
WBR
Maxim aka solomax