You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@guacamole.apache.org by Paula Carboné <ca...@gmail.com> on 2021/09/16 10:32:47 UTC
Re: xorg driver problems
Hi, still trying to make it work but it doesn't seem to pass the configure
script check. Looks like XORG is missing but it is installed tho...
Just wondering, have you installed Xorg in a newer Ubuntu version? (meaning
16 or later). I am trying on Ubuntu 20.04 and CentOS 8, but in previous
messages you said you have it installed on Ubuntu 16. Maybe this is the
problem?
Thanks!
El vie, 27 ago 2021 a las 8:25, Paula Carboné (<ca...@gmail.com>)
escribió:
> Thakyouuuuu! :)))) I will try with these instructions, hope it works!
>
> El mar, 24 ago 2021 a las 21:31, Christopher Speck (<di...@gmail.com>)
> escribió:
>
>> From the output it looks like it’s failing to find any of the necessary
>> installed packages of xors-server to build against.
>>
>> On an ubuntu system these are the packages that I install in order to
>> compile:
>>
>> - xorg
>> - x11-utils
>> - libxfont (I couldn’t get libxfont1 on ubuntu so I used libxfont2 but it
>> requires changes in order to properly compile)
>> - libxft2
>> - libxrender1
>> - libx11-xcb1
>> - libxcb-randr0
>> - libxcb-xfixes0
>>
>> AND also the -dev versions of these packages
>> - xorg-dev
>> - libxfont-dev
>> - libxft-dev
>> - libxrender-dev
>> - libx11-xcb-dev
>> - libxcb-randr0-dev
>> - libxcb-xfixes0-dev
>>
>> The ./configure flags I use are
>> ./configure —with-xorg —with-xcb —with-xcb-randr —with-xcb-xfixes
>>
>> I’m not sure if anything beyond —with-xorg is necessary as I think it
>> gets picked up automatically, but I haven’t experimented with changing
>> the.flags so I left it as-is.
>>
>> Christopher Speck
>>
>>
>> On Aug 24, 2021, at 3:29 AM, Paula Carboné <ca...@gmail.com>
>> wrote:
>>
>> Hi! Any updates on this? Many thanks! :D
>>
>> El vie, 20 ago 2021 a las 13:23, Paula Carboné (<
>> carbonemejias98@gmail.com>) escribió:
>>
>>> Forgot to attach the file sorrryyyyy
>>>
>>> El vie, 20 ago 2021 a las 13:22, Paula Carboné (<
>>> carbonemejias98@gmail.com>) escribió:
>>>
>>>> Hi Christopher! I have tried again and it keeps displaying the same. I
>>>> attach you the output of the following command:
>>>> ./configure --with-xorg
>>>>
>>>> The packages I have installed are:
>>>> xserver-xorg-core
>>>> xserver-xorg-dev
>>>> xorg-dev
>>>> xserver-xorg-dev
>>>>
>>>> xorg-server and xorg-server-dev are not found for the OS I am using
>>>> (Ubuntu 20.04), but I think the packages listed above should be ok.
>>>> Thanks! :)
>>>>
>>>>
>>>> El jue, 19 ago 2021 a las 6:12, Christopher Speck (<
>>>> die.drachen@gmail.com>) escribió:
>>>>
>>>>> Hi Paula,
>>>>>
>>>>> The --with-xorg-module-dir argument may have been removed if you
>>>>> copied the draft changes at
>>>>> https://github.com/apache/guacamole-server/pull/316, though I don't
>>>>> think this should interfere with it compiling for xorg server.
>>>>>
>>>>> If removing that flag still results in xorg-server not being included,
>>>>> even though you're specifying --with-xorg, that likely means some
>>>>> dependencies are not present on the system. Make sure you have xorg-server
>>>>> and xorg-server-dev packages installed.
>>>>>
>>>>> If you still continue to have issues can you attach a text file with
>>>>> the full output?
>>>>>
>>>>> Christopher Speck
>>>>>
>>>>> On Wed, Aug 18, 2021 at 4:36 PM Paula Carboné <
>>>>> carbonemejias98@gmail.com> wrote:
>>>>>
>>>>>> Hi! Im using Guacamole for a few weeks now but I am experiencing some
>>>>>> troubles with the Xorg driver installation.
>>>>>> I am able to download the guacamole-server (xf86-video-guac branch).
>>>>>> Then I run *autoreconf -fi* in oder to get the *configure* file
>>>>>> needed to run the following command:
>>>>>>
>>>>>> *./configure --with-xorg-module-dir=/usr/lib/xorg/modules/ --with-xorg*
>>>>>>
>>>>>> After that, the following message is displayed:
>>>>>> *configure: WARNING: unrecognized options: --with-xorg-module-dir*
>>>>>> As a result, the library status displays as follows:
>>>>>> freerdp2 ............ yes
>>>>>> pango ............... yes
>>>>>> * xorg-server ......... no*
>>>>>> libavcodec .......... yes
>>>>>> libavformat.......... yes
>>>>>> libavutil ........... yes
>>>>>> libssh2 ............. yes
>>>>>> libssl .............. yes
>>>>>> libswscale .......... yes
>>>>>> libtelnet ........... yes
>>>>>> libVNCServer ........ yes
>>>>>> libvorbis ........... yes
>>>>>> libpulse ............ yes
>>>>>> libwebsockets ....... yes
>>>>>> libwebp ............. yes
>>>>>> libxcb .............. yes
>>>>>> libxcb-randr ........ no
>>>>>> libxcb-xfixes ....... no
>>>>>> wsock32 ............. no
>>>>>>
>>>>>> Protocol support:
>>>>>> Kubernetes .... yes
>>>>>> RDP ........... yes
>>>>>> SSH ........... yes
>>>>>> Telnet ........ yes
>>>>>> VNC ........... yes
>>>>>>
>>>>>> Drivers:
>>>>>> * X.Org <http://X.Org> (EXPERIMENTAL) .... no*
>>>>>>
>>>>>> Services / tools:
>>>>>> guacd ...... yes
>>>>>> guacenc .... yes
>>>>>> guaclog .... yes
>>>>>> FreeRDP plugins: /usr/lib/x86_64-linux-gnu/freerdp2
>>>>>> Init scripts: no
>>>>>> Systemd units: no
>>>>>>
>>>>>> Type "make" to compile guacamole-server.
>>>>>>
>>>>>> Please, note that I have followed the instructions provided by Mike
>>>>>> Jumper in *https://www.mail-archive.com/user@guacamole.incubator.apache.org/msg01299.html
>>>>>> <https://www.mail-archive.com/user@guacamole.incubator.apache.org/msg01299.html>*
>>>>>> as well as *https://gist.github.com/jamhall/844c49515f76126b218a16043ef08952
>>>>>> <https://gist.github.com/jamhall/844c49515f76126b218a16043ef08952>*
>>>>>> I dont have a clue on what to do, since the configure file generated
>>>>>> seems to be the problem but I cannot find further info online
>>>>>> Thaaanks and best regards!
>>>>>>
>>>>>
>>
Re: xorg driver problems
Posted by Christopher Speck <di...@gmail.com>.
I’ve built the driver on CentOS 7 and Ubuntu 18.04. Maybe there are issues using Ubuntu 20? Give 18.04 a try and see if you still run into problems.
Christopher Speck
> On Sep 16, 2021, at 6:32 AM, Paula Carboné <ca...@gmail.com> wrote:
>
> Hi, still trying to make it work but it doesn't seem to pass the configure script check. Looks like XORG is missing but it is installed tho...
> Just wondering, have you installed Xorg in a newer Ubuntu version? (meaning 16 or later). I am trying on Ubuntu 20.04 and CentOS 8, but in previous messages you said you have it installed on Ubuntu 16. Maybe this is the problem?
>
> Thanks!
>
> El vie, 27 ago 2021 a las 8:25, Paula Carboné (<carbonemejias98@gmail.com <ma...@gmail.com>>) escribió:
> Thakyouuuuu! :)))) I will try with these instructions, hope it works!
>
> El mar, 24 ago 2021 a las 21:31, Christopher Speck (<die.drachen@gmail.com <ma...@gmail.com>>) escribió:
> From the output it looks like it’s failing to find any of the necessary installed packages of xors-server to build against.
>
> On an ubuntu system these are the packages that I install in order to compile:
>
> - xorg
> - x11-utils
> - libxfont (I couldn’t get libxfont1 on ubuntu so I used libxfont2 but it requires changes in order to properly compile)
> - libxft2
> - libxrender1
> - libx11-xcb1
> - libxcb-randr0
> - libxcb-xfixes0
>
> AND also the -dev versions of these packages
> - xorg-dev
> - libxfont-dev
> - libxft-dev
> - libxrender-dev
> - libx11-xcb-dev
> - libxcb-randr0-dev
> - libxcb-xfixes0-dev
>
> The ./configure flags I use are
> ./configure —with-xorg —with-xcb —with-xcb-randr —with-xcb-xfixes
>
> I’m not sure if anything beyond —with-xorg is necessary as I think it gets picked up automatically, but I haven’t experimented with changing the.flags so I left it as-is.
>
> Christopher Speck
>
>
>> On Aug 24, 2021, at 3:29 AM, Paula Carboné <carbonemejias98@gmail.com <ma...@gmail.com>> wrote:
>>
>> Hi! Any updates on this? Many thanks! :D
>>
>> El vie, 20 ago 2021 a las 13:23, Paula Carboné (<carbonemejias98@gmail.com <ma...@gmail.com>>) escribió:
>> Forgot to attach the file sorrryyyyy
>>
>> El vie, 20 ago 2021 a las 13:22, Paula Carboné (<carbonemejias98@gmail.com <ma...@gmail.com>>) escribió:
>> Hi Christopher! I have tried again and it keeps displaying the same. I attach you the output of the following command:
>> ./configure --with-xorg
>>
>> The packages I have installed are:
>> xserver-xorg-core
>> xserver-xorg-dev
>> xorg-dev
>> xserver-xorg-dev
>>
>> xorg-server and xorg-server-dev are not found for the OS I am using (Ubuntu 20.04), but I think the packages listed above should be ok.
>> Thanks! :)
>>
>>
>> El jue, 19 ago 2021 a las 6:12, Christopher Speck (<die.drachen@gmail.com <ma...@gmail.com>>) escribió:
>> Hi Paula,
>>
>> The --with-xorg-module-dir argument may have been removed if you copied the draft changes at https://github.com/apache/guacamole-server/pull/316 <https://github.com/apache/guacamole-server/pull/316>, though I don't think this should interfere with it compiling for xorg server.
>>
>> If removing that flag still results in xorg-server not being included, even though you're specifying --with-xorg, that likely means some dependencies are not present on the system. Make sure you have xorg-server and xorg-server-dev packages installed.
>>
>> If you still continue to have issues can you attach a text file with the full output?
>>
>> Christopher Speck
>>
>> On Wed, Aug 18, 2021 at 4:36 PM Paula Carboné <carbonemejias98@gmail.com <ma...@gmail.com>> wrote:
>> Hi! Im using Guacamole for a few weeks now but I am experiencing some troubles with the Xorg driver installation.
>> I am able to download the guacamole-server (xf86-video-guac branch). Then I run autoreconf -fi in oder to get the configure file needed to run the following command:
>> ./configure --with-xorg-module-dir=/usr/lib/xorg/modules/ --with-xorg
>> After that, the following message is displayed:
>> configure: WARNING: unrecognized options: --with-xorg-module-dir
>> As a result, the library status displays as follows:
>> freerdp2 ............ yes
>> pango ............... yes
>> xorg-server ......... no
>> libavcodec .......... yes
>> libavformat.......... yes
>> libavutil ........... yes
>> libssh2 ............. yes
>> libssl .............. yes
>> libswscale .......... yes
>> libtelnet ........... yes
>> libVNCServer ........ yes
>> libvorbis ........... yes
>> libpulse ............ yes
>> libwebsockets ....... yes
>> libwebp ............. yes
>> libxcb .............. yes
>> libxcb-randr ........ no
>> libxcb-xfixes ....... no
>> wsock32 ............. no
>>
>> Protocol support:
>> Kubernetes .... yes
>> RDP ........... yes
>> SSH ........... yes
>> Telnet ........ yes
>> VNC ........... yes
>>
>> Drivers:
>> X.Org <http://x.org/> (EXPERIMENTAL) .... no
>>
>> Services / tools:
>> guacd ...... yes
>> guacenc .... yes
>> guaclog .... yes
>> FreeRDP plugins: /usr/lib/x86_64-linux-gnu/freerdp2
>> Init scripts: no
>> Systemd units: no
>>
>> Type "make" to compile guacamole-server.
>>
>> Please, note that I have followed the instructions provided by Mike Jumper in https://www.mail-archive.com/user@guacamole.incubator.apache.org/msg01299.html <https://www.mail-archive.com/user@guacamole.incubator.apache.org/msg01299.html> as well as https://gist.github.com/jamhall/844c49515f76126b218a16043ef08952 <https://gist.github.com/jamhall/844c49515f76126b218a16043ef08952>
>> I dont have a clue on what to do, since the configure file generated seems to be the problem but I cannot find further info online
>> Thaaanks and best regards!
>