You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@openoffice.apache.org by 張仁瀚 <yo...@gmail.com> on 2013/09/02 07:02:43 UTC
AOO 4.0 Release notes problem in numbering
Hello everyone,
Recent days I have tried some improvement in the version 4.0 from release
notes [1] . But I got a problem in my implementation.
The item "Support more Numbering&bullet types in docx" is under the index
"OOXML general". And that is where my question is.
I use the function which is "numbering" to enter the following words in MS
office:
一. some words
二. some words
三. some words
壹、some words
貳、some words
參、some words
甲、some words
乙、some words
丙、some words
And I saved it as docx. In fact, whatever I used doc or docx, I got the
same result as I opened the doc or docx file with AOO:
1. some words
2. some words
3. some words
壹、some words
貳、some words
參、some words
甲、some words
乙、some words
丙、some words
The problem is that Chinese number (一二三 is equal to 123) cannot be convert
completely in AOO.
Does I got wrong understanding in this improvement or there is something
wrong?
Also, if this improvement is not talking about what I did above, how can I
contribute and improve my problem?
[1]
https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+4.0+Release+Notes
Thanks.
Yohey.
Re: AOO 4.0 Release notes problem in numbering
Posted by Oliver-Rainer Wittmann <or...@googlemail.com>.
Hi,
On 05.09.2013 05:20, Shenfeng Liu wrote:
> Yohey,
> I wonder if you can send the your sample file to me and Steve in private
> mail? So that we can check the issue you meet.
> Thanks!
>
It would be even better to submit a public available Bugzilla issue [1]
with the sample file attached to it. Then everybody in the community can
work on it.
[1] http://www.openoffice.org/qa/issue_handling/pre_submission.html
Best regards, Oliver.
> - Shenfeng (Simon)
>
>
>
> 2013/9/4 Steve Yin <st...@gmail.com>
>
>> Hi Yohey,
>>
>> My MSO version is 2010 64bit. The numbering "һ����������" was inserted from the
>> popup menu ->numbering library. Then the document was saved into the doc
>> and docx format.
>>
>> Please make sure that the language settings of the AOO is correct. My
>> locale setting and the Asian language setting for document are "Chinese
>> (Simplified)".
>>
>>
>>
>> On Wed, Sep 4, 2013 at 11:58 AM, ����� <yo...@gmail.com> wrote:
>>
>>> Hello Steve,
>>>
>>> well, what's your version of MS office? I use the version 2010. But in
>> fact
>>> the problem still existed as I tested it. Only the number "һ����" cannot be
>>> transformed correctly.
>>> I would like to know how you test it in detail. Just like how you enter
>> or
>>> insert your numbers.
>>> Thanks for your help, this really disturbed me a lot.
>>>
>>> Regards,
>>> Yohey.
>>>
>>>
>>> 2013/9/3 Steve Yin <st...@gmail.com>
>>>
>>>> Hi Yohey,
>>>>
>>>> I got the same wrong result on MS doc format. But using MS docx is OK.
>>> That
>>>> is consistent with the AOO 4.0 release notes "Support more
>>> Numbering&bullet
>>>> types in docx". Please check it.
>>>>
>>>>
>>>> On Mon, Sep 2, 2013 at 1:02 PM, ����� <yo...@gmail.com> wrote:
>>>>
>>>>> Hello everyone,
>>>>>
>>>>> Recent days I have tried some improvement in the version 4.0 from
>>> release
>>>>> notes [1] . But I got a problem in my implementation.
>>>>> The item "Support more Numbering&bullet types in docx" is under the
>>>> index
>>>>> "OOXML general". And that is where my question is.
>>>>>
>>>>> I use the function which is "numbering" to enter the following words
>> in
>>>> MS
>>>>> office:
>>>>>
>>>>> һ. some words
>>>>>
>>>>> ��. some words
>>>>>
>>>>> ��. some words
>>>>>
>>>>>
>>>>>
>>>>> Ҽ��some words
>>>>>
>>>>> �E��some words
>>>>>
>>>>> ����some words
>>>>>
>>>>>
>>>>>
>>>>> �ס�some words
>>>>>
>>>>> �ҡ�some words
>>>>>
>>>>> ����some words
>>>>>
>>>>>
>>>>> And I saved it as docx. In fact, whatever I used doc or docx, I got
>> the
>>>>> same result as I opened the doc or docx file with AOO:
>>>>>
>>>>> 1. some words
>>>>>
>>>>> 2. some words
>>>>>
>>>>> 3. some words
>>>>>
>>>>>
>>>>>
>>>>> Ҽ��some words
>>>>>
>>>>> �E��some words
>>>>>
>>>>> ����some words
>>>>>
>>>>>
>>>>>
>>>>> �ס�some words
>>>>>
>>>>> �ҡ�some words
>>>>>
>>>>> ����some words
>>>>>
>>>>> The problem is that Chinese number (һ���� is equal to 123) cannot be
>>>> convert
>>>>> completely in AOO.
>>>>> Does I got wrong understanding in this improvement or there is
>>> something
>>>>> wrong?
>>>>>
>>>>> Also, if this improvement is not talking about what I did above, how
>>> can
>>>> I
>>>>> contribute and improve my problem?
>>>>>
>>>>>
>>>>> [1]
>>>>>
>>>>
>>>
>> https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+4.0+Release+Notes
>>>>>
>>>>>
>>>>> Thanks.
>>>>> Yohey.
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Best Regards,
>>>>
>>>> Steve Yin
>>>>
>>>
>>
>>
>>
>> --
>> Best Regards,
>>
>> Steve Yin
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: AOO 4.0 Release notes problem in numbering
Posted by Shenfeng Liu <li...@gmail.com>.
Yohey,
I wonder if you can send the your sample file to me and Steve in private
mail? So that we can check the issue you meet.
Thanks!
- Shenfeng (Simon)
2013/9/4 Steve Yin <st...@gmail.com>
> Hi Yohey,
>
> My MSO version is 2010 64bit. The numbering "һ����������" was inserted from the
> popup menu ->numbering library. Then the document was saved into the doc
> and docx format.
>
> Please make sure that the language settings of the AOO is correct. My
> locale setting and the Asian language setting for document are "Chinese
> (Simplified)".
>
>
>
> On Wed, Sep 4, 2013 at 11:58 AM, ����� <yo...@gmail.com> wrote:
>
> > Hello Steve,
> >
> > well, what's your version of MS office? I use the version 2010. But in
> fact
> > the problem still existed as I tested it. Only the number "һ����" cannot be
> > transformed correctly.
> > I would like to know how you test it in detail. Just like how you enter
> or
> > insert your numbers.
> > Thanks for your help, this really disturbed me a lot.
> >
> > Regards,
> > Yohey.
> >
> >
> > 2013/9/3 Steve Yin <st...@gmail.com>
> >
> > > Hi Yohey,
> > >
> > > I got the same wrong result on MS doc format. But using MS docx is OK.
> > That
> > > is consistent with the AOO 4.0 release notes "Support more
> > Numbering&bullet
> > > types in docx". Please check it.
> > >
> > >
> > > On Mon, Sep 2, 2013 at 1:02 PM, ����� <yo...@gmail.com> wrote:
> > >
> > > > Hello everyone,
> > > >
> > > > Recent days I have tried some improvement in the version 4.0 from
> > release
> > > > notes [1] . But I got a problem in my implementation.
> > > > The item "Support more Numbering&bullet types in docx" is under the
> > > index
> > > > "OOXML general". And that is where my question is.
> > > >
> > > > I use the function which is "numbering" to enter the following words
> in
> > > MS
> > > > office:
> > > >
> > > > һ. some words
> > > >
> > > > ��. some words
> > > >
> > > > ��. some words
> > > >
> > > >
> > > >
> > > > Ҽ��some words
> > > >
> > > > �E��some words
> > > >
> > > > ����some words
> > > >
> > > >
> > > >
> > > > �ס�some words
> > > >
> > > > �ҡ�some words
> > > >
> > > > ����some words
> > > >
> > > >
> > > > And I saved it as docx. In fact, whatever I used doc or docx, I got
> the
> > > > same result as I opened the doc or docx file with AOO:
> > > >
> > > > 1. some words
> > > >
> > > > 2. some words
> > > >
> > > > 3. some words
> > > >
> > > >
> > > >
> > > > Ҽ��some words
> > > >
> > > > �E��some words
> > > >
> > > > ����some words
> > > >
> > > >
> > > >
> > > > �ס�some words
> > > >
> > > > �ҡ�some words
> > > >
> > > > ����some words
> > > >
> > > > The problem is that Chinese number (һ���� is equal to 123) cannot be
> > > convert
> > > > completely in AOO.
> > > > Does I got wrong understanding in this improvement or there is
> > something
> > > > wrong?
> > > >
> > > > Also, if this improvement is not talking about what I did above, how
> > can
> > > I
> > > > contribute and improve my problem?
> > > >
> > > >
> > > > [1]
> > > >
> > >
> >
> https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+4.0+Release+Notes
> > > >
> > > >
> > > > Thanks.
> > > > Yohey.
> > > >
> > >
> > >
> > >
> > > --
> > > Best Regards,
> > >
> > > Steve Yin
> > >
> >
>
>
>
> --
> Best Regards,
>
> Steve Yin
>
Re: AOO 4.0 Release notes problem in numbering
Posted by Steve Yin <st...@gmail.com>.
Hi Yohey,
My MSO version is 2010 64bit. The numbering "一、二、三、" was inserted from the
popup menu ->numbering library. Then the document was saved into the doc
and docx format.
Please make sure that the language settings of the AOO is correct. My
locale setting and the Asian language setting for document are "Chinese
(Simplified)".
On Wed, Sep 4, 2013 at 11:58 AM, 張仁瀚 <yo...@gmail.com> wrote:
> Hello Steve,
>
> well, what's your version of MS office? I use the version 2010. But in fact
> the problem still existed as I tested it. Only the number "一二三" cannot be
> transformed correctly.
> I would like to know how you test it in detail. Just like how you enter or
> insert your numbers.
> Thanks for your help, this really disturbed me a lot.
>
> Regards,
> Yohey.
>
>
> 2013/9/3 Steve Yin <st...@gmail.com>
>
> > Hi Yohey,
> >
> > I got the same wrong result on MS doc format. But using MS docx is OK.
> That
> > is consistent with the AOO 4.0 release notes "Support more
> Numbering&bullet
> > types in docx". Please check it.
> >
> >
> > On Mon, Sep 2, 2013 at 1:02 PM, 張仁瀚 <yo...@gmail.com> wrote:
> >
> > > Hello everyone,
> > >
> > > Recent days I have tried some improvement in the version 4.0 from
> release
> > > notes [1] . But I got a problem in my implementation.
> > > The item "Support more Numbering&bullet types in docx" is under the
> > index
> > > "OOXML general". And that is where my question is.
> > >
> > > I use the function which is "numbering" to enter the following words in
> > MS
> > > office:
> > >
> > > 一. some words
> > >
> > > 二. some words
> > >
> > > 三. some words
> > >
> > >
> > >
> > > 壹、some words
> > >
> > > 貳、some words
> > >
> > > 參、some words
> > >
> > >
> > >
> > > 甲、some words
> > >
> > > 乙、some words
> > >
> > > 丙、some words
> > >
> > >
> > > And I saved it as docx. In fact, whatever I used doc or docx, I got the
> > > same result as I opened the doc or docx file with AOO:
> > >
> > > 1. some words
> > >
> > > 2. some words
> > >
> > > 3. some words
> > >
> > >
> > >
> > > 壹、some words
> > >
> > > 貳、some words
> > >
> > > 參、some words
> > >
> > >
> > >
> > > 甲、some words
> > >
> > > 乙、some words
> > >
> > > 丙、some words
> > >
> > > The problem is that Chinese number (一二三 is equal to 123) cannot be
> > convert
> > > completely in AOO.
> > > Does I got wrong understanding in this improvement or there is
> something
> > > wrong?
> > >
> > > Also, if this improvement is not talking about what I did above, how
> can
> > I
> > > contribute and improve my problem?
> > >
> > >
> > > [1]
> > >
> >
> https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+4.0+Release+Notes
> > >
> > >
> > > Thanks.
> > > Yohey.
> > >
> >
> >
> >
> > --
> > Best Regards,
> >
> > Steve Yin
> >
>
--
Best Regards,
Steve Yin
Re: AOO 4.0 Release notes problem in numbering
Posted by 張仁瀚 <yo...@gmail.com>.
Hello Steve,
well, what's your version of MS office? I use the version 2010. But in fact
the problem still existed as I tested it. Only the number "一二三" cannot be
transformed correctly.
I would like to know how you test it in detail. Just like how you enter or
insert your numbers.
Thanks for your help, this really disturbed me a lot.
Regards,
Yohey.
2013/9/3 Steve Yin <st...@gmail.com>
> Hi Yohey,
>
> I got the same wrong result on MS doc format. But using MS docx is OK. That
> is consistent with the AOO 4.0 release notes "Support more Numbering&bullet
> types in docx". Please check it.
>
>
> On Mon, Sep 2, 2013 at 1:02 PM, 張仁瀚 <yo...@gmail.com> wrote:
>
> > Hello everyone,
> >
> > Recent days I have tried some improvement in the version 4.0 from release
> > notes [1] . But I got a problem in my implementation.
> > The item "Support more Numbering&bullet types in docx" is under the
> index
> > "OOXML general". And that is where my question is.
> >
> > I use the function which is "numbering" to enter the following words in
> MS
> > office:
> >
> > 一. some words
> >
> > 二. some words
> >
> > 三. some words
> >
> >
> >
> > 壹、some words
> >
> > 貳、some words
> >
> > 參、some words
> >
> >
> >
> > 甲、some words
> >
> > 乙、some words
> >
> > 丙、some words
> >
> >
> > And I saved it as docx. In fact, whatever I used doc or docx, I got the
> > same result as I opened the doc or docx file with AOO:
> >
> > 1. some words
> >
> > 2. some words
> >
> > 3. some words
> >
> >
> >
> > 壹、some words
> >
> > 貳、some words
> >
> > 參、some words
> >
> >
> >
> > 甲、some words
> >
> > 乙、some words
> >
> > 丙、some words
> >
> > The problem is that Chinese number (一二三 is equal to 123) cannot be
> convert
> > completely in AOO.
> > Does I got wrong understanding in this improvement or there is something
> > wrong?
> >
> > Also, if this improvement is not talking about what I did above, how can
> I
> > contribute and improve my problem?
> >
> >
> > [1]
> >
> https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+4.0+Release+Notes
> >
> >
> > Thanks.
> > Yohey.
> >
>
>
>
> --
> Best Regards,
>
> Steve Yin
>
Re: AOO 4.0 Release notes problem in numbering
Posted by Steve Yin <st...@gmail.com>.
Hi Yohey,
I got the same wrong result on MS doc format. But using MS docx is OK. That
is consistent with the AOO 4.0 release notes "Support more Numbering&bullet
types in docx". Please check it.
On Mon, Sep 2, 2013 at 1:02 PM, 張仁瀚 <yo...@gmail.com> wrote:
> Hello everyone,
>
> Recent days I have tried some improvement in the version 4.0 from release
> notes [1] . But I got a problem in my implementation.
> The item "Support more Numbering&bullet types in docx" is under the index
> "OOXML general". And that is where my question is.
>
> I use the function which is "numbering" to enter the following words in MS
> office:
>
> 一. some words
>
> 二. some words
>
> 三. some words
>
>
>
> 壹、some words
>
> 貳、some words
>
> 參、some words
>
>
>
> 甲、some words
>
> 乙、some words
>
> 丙、some words
>
>
> And I saved it as docx. In fact, whatever I used doc or docx, I got the
> same result as I opened the doc or docx file with AOO:
>
> 1. some words
>
> 2. some words
>
> 3. some words
>
>
>
> 壹、some words
>
> 貳、some words
>
> 參、some words
>
>
>
> 甲、some words
>
> 乙、some words
>
> 丙、some words
>
> The problem is that Chinese number (一二三 is equal to 123) cannot be convert
> completely in AOO.
> Does I got wrong understanding in this improvement or there is something
> wrong?
>
> Also, if this improvement is not talking about what I did above, how can I
> contribute and improve my problem?
>
>
> [1]
> https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+4.0+Release+Notes
>
>
> Thanks.
> Yohey.
>
--
Best Regards,
Steve Yin