You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@httpd.apache.org by Matthew Smith <ch...@gmail.com> on 2013/02/25 01:32:49 UTC
[users@httpd] Re: 403 error for subsite using htaccess
got it, never mind.
On Sun, Feb 24, 2013 at 4:21 PM, Matthew Smith <ch...@gmail.com>wrote:
> I am using .htaccess to direct requests to a subdirectory in the web root.
>
> I can access the top level site, but get a 403 for the subsite.
>
> here is the htaccess:
> RewriteEngine On
> RewriteCond %{HTTP_HOST} subsite\.com [NC]
> RewriteCond %{REQUEST_URI} !^/site_subsite_com/ [NC]
> RewriteRule (.*) /site_subsite_com/$1 [L]
>
> RewriteCond %{REQUEST_URI} ^/site_subsite_com/ [NC]
> RewriteCond %{HTTP_HOST} !subsite\.com [NC]
> RewriteRule . http://%{HTTP_HOST}/ [R=301,L]
>
> Here is httpd.conf:
>
> #
> # This is the main Apache HTTP server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
> # In particular, see
> # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32),
> the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "C:/Program Files/Apache Software
> Foundation/Apache2.2" will be interpreted by the
> # server as "C:/Program Files/Apache Software
> Foundation/Apache2.2/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/Apache" instead of "c:\Apache").
> # If a drive letter is omitted, the drive on which httpd.exe is located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths to avoid confusion.
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to point the LockFile directive
> # at a local disk. If you wish to share the same ServerRoot for multiple
> # httpd daemons, you will need to change at least LockFile and PidFile.
> #
> ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80
> Listen 192.168.1.10:80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO
> you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> #LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule authn_alias_module modules/mod_authn_alias.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_default_module modules/mod_authn_default.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_default_module modules/mod_authz_default.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule cache_module modules/mod_cache.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> LoadModule cgi_module modules/mod_cgi.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule dav_lock_module modules/mod_dav_lock.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so
> LoadModule dir_module modules/mod_dir.so
> #LoadModule disk_cache_module modules/mod_disk_cache.so
> #LoadModule dumpio_module modules/mod_dumpio.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule filter_module modules/mod_filter.so
> #LoadModule headers_module modules/mod_headers.so
> #LoadModule ident_module modules/mod_ident.so
> #LoadModule imagemap_module modules/mod_imagemap.so
> LoadModule include_module modules/mod_include.so
> #LoadModule info_module modules/mod_info.so
> LoadModule isapi_module modules/mod_isapi.so
> #LoadModule ldap_module modules/mod_ldap.so
> #LoadModule logio_module modules/mod_logio.so
> LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule mem_cache_module modules/mod_mem_cache.so
> LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule reqtimeout_module modules/mod_reqtimeout.so
> #LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule speling_module modules/mod_speling.so
> #LoadModule ssl_module modules/mod_ssl.so
> #LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> #LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule version_module modules/mod_version.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> LoadModule rewrite_module modules/mod_rewrite.so
>
> <IfModule !mpm_netware_module>
> <IfModule !mpm_winnt_module>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> User daemon
> Group daemon
>
> </IfModule>
> </IfModule>
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin@your-domain.com
> #
> #ServerAdmin (redacted)
>
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP address
> here.
> #
> #ServerName server:80
> ServerName 192.168.1.10:80
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "//AWESOME-PC/wwwroot/mainsite_com"
>
> #
> # Each directory to which Apache has access can be configured with respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> #
> <Directory />
> Options FollowSymLinks
> AllowOverride All
> Order deny,allow
> Deny from all
> Satisfy all
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> <Directory "//AWESOME-PC/wwwroot/mainsite_com">
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important. Please see
> # http://httpd.apache.org/docs/2.2/mod/core.html#options
> # for more information.
> #
> Options Indexes FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed in .htaccess
> files.
> # It can be "All", "None", or any combination of the keywords:
> # Options FileInfo AuthConfig Limit
> #
> AllowOverride None
>
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
>
> </Directory>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> <IfModule dir_module>
> DirectoryIndex index.cfm
> </IfModule>
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> #
> <FilesMatch "^\.ht">
> Order allow,deny
> Deny from all
> Satisfy All
> </FilesMatch>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog "logs/error.log"
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> <IfModule log_config_module>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
> <IfModule logio_module>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\" %I %O" combinedio
> </IfModule>
>
> #
> # The location and format of the access logfile (Common Logfile
> Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog "logs/access.log" common
>
> #
> # If you prefer a logfile with access, agent, and referer information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog "logs/access.log" combined
> </IfModule>
>
> <IfModule alias_module>
> #
> # Redirect: Allows you to tell clients about documents that used to
> # exist in your server's namespace, but do not anymore. The client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foo http://server/bar
>
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a <Directory> section to allow access to
> # the filesystem path.
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as applications and
> # run by the server when requested rather than as documents sent to the
> # client. The same rules about trailing "/" apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software
> Foundation/Apache2.2/cgi-bin/"
>
> </IfModule>
>
> <IfModule cgid_module>
> #
> # ScriptSock: On threaded servers, designate the path to the UNIX
> # socket used to communicate with the CGI daemon of mod_cgid.
> #
> #Scriptsock logs/cgisock
> </IfModule>
>
> #
> # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should
> be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
> </Directory>
>
>
>
> #
> # DefaultType: the default MIME type the server will use for a document
> # if it cannot otherwise determine one, such as from filename extensions.
> # If your server contains mostly text or HTML documents, "text/plain" is
> # a good value. If most of your content is binary, such as applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> <IfModule mime_module>
> #
> # TypesConfig points to the file containing the list of mappings from
> # filename extension to MIME-type.
> #
> TypesConfig conf/mime.types
>
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> #AddEncoding x-compress .Z
> #AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/vnd.adobe.air-application-installer-package+zip .air
> AddType application/x-gzip .gz .tgz
>
> #
> # AddHandler allows you to map certain file extensions to "handlers":
> # actions unrelated to filetype. These can be either built into the
> server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options" directive.)
> #
> #AddHandler cgi-script .cgi
>
> # For type maps (negotiated resources):
> #AddHandler type-map var
>
> #
> # Filters allow you to process content before it is sent to the client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options" directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml
> </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> ErrorDocument 404 /404.cfm
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://server/subscription_info.html
> #
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
>
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
>
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> #Include conf/extra/httpd-autoindex.conf
>
> # Language settings
> #Include conf/extra/httpd-languages.conf
>
> # User home directories
> #Include conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
>
> # Virtual hosts
> Include conf/extra/httpd-vhosts.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include conf/extra/httpd-default.conf
>
> # Secure (SSL/TLS) connections
> #Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random equivalent
> # but a statically compiled-in mod_ssl.
> #
> <IfModule ssl_module>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> </IfModule>
> # JRun Settings
> LoadModule jrun_module
> "C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so"
> <IfModule mod_jrun22.c>
> JRunConfig Verbose true
> JRunConfig Apialloc true
> JRunConfig Ignoresuffixmap false
> JRunConfig Serverstore
> "C:/ColdFusion9/runtime/lib/wsconfig/1/jrunserver.store"
> JRunConfig Bootstrap 127.0.0.1:51800
> #JRunConfig Errorurl url <optionally redirect to this URL on errors>
> #JRunConfig ProxyRetryInterval 600 <number of seconds to wait before
> trying to reconnect to unreachable clustered server>
> #JRunConfig ConnectTimeout 15 <number of seconds to wait on a socket
> connect to a jrun server>
> #JRunConfig RecvTimeout 300 <number of seconds to wait on a socket
> receive to a jrun server>
> #JRunConfig SendTimeout 15 <number of seconds to wait on a socket send
> to a jrun server>
> AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
> </IfModule>
>
> <Files ~ "^\.ht">
> Order allow,deny
> Deny from all
> </Files>
> <Files ~ ".hbmxml$">
> Order allow,deny
> Deny from all
> </Files>
>
>
--
Regards,
chedder is bedder