You are viewing a plain text version of this content. The canonical link for it is here.
Posted to common-commits@hadoop.apache.org by aw...@apache.org on 2015/02/10 22:40:05 UTC
[1/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Repository: hadoop
Updated Branches:
refs/heads/trunk 6338ce3ae -> e9d26fe9e
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/SecureMode.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/SecureMode.md b/hadoop-common-project/hadoop-common/src/site/markdown/SecureMode.md
new file mode 100644
index 0000000..ae057bc
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/SecureMode.md
@@ -0,0 +1,375 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+* [Hadoop in Secure Mode](#Hadoop_in_Secure_Mode)
+ * [Introduction](#Introduction)
+ * [Authentication](#Authentication)
+ * [End User Accounts](#End_User_Accounts)
+ * [User Accounts for Hadoop Daemons](#User_Accounts_for_Hadoop_Daemons)
+ * [Kerberos principals for Hadoop Daemons and Users](#Kerberos_principals_for_Hadoop_Daemons_and_Users)
+ * [Mapping from Kerberos principal to OS user account](#Mapping_from_Kerberos_principal_to_OS_user_account)
+ * [Mapping from user to group](#Mapping_from_user_to_group)
+ * [Proxy user](#Proxy_user)
+ * [Secure DataNode](#Secure_DataNode)
+ * [Data confidentiality](#Data_confidentiality)
+ * [Data Encryption on RPC](#Data_Encryption_on_RPC)
+ * [Data Encryption on Block data transfer.](#Data_Encryption_on_Block_data_transfer.)
+ * [Data Encryption on HTTP](#Data_Encryption_on_HTTP)
+ * [Configuration](#Configuration)
+ * [Permissions for both HDFS and local fileSystem paths](#Permissions_for_both_HDFS_and_local_fileSystem_paths)
+ * [Common Configurations](#Common_Configurations)
+ * [NameNode](#NameNode)
+ * [Secondary NameNode](#Secondary_NameNode)
+ * [DataNode](#DataNode)
+ * [WebHDFS](#WebHDFS)
+ * [ResourceManager](#ResourceManager)
+ * [NodeManager](#NodeManager)
+ * [Configuration for WebAppProxy](#Configuration_for_WebAppProxy)
+ * [LinuxContainerExecutor](#LinuxContainerExecutor)
+ * [MapReduce JobHistory Server](#MapReduce_JobHistory_Server)
+
+Hadoop in Secure Mode
+=====================
+
+Introduction
+------------
+
+This document describes how to configure authentication for Hadoop in secure mode.
+
+By default Hadoop runs in non-secure mode in which no actual authentication is required. By configuring Hadoop runs in secure mode, each user and service needs to be authenticated by Kerberos in order to use Hadoop services.
+
+Security features of Hadoop consist of [authentication](#Authentication), [service level authorization](./ServiceLevelAuth.html), [authentication for Web consoles](./HttpAuthentication.html) and [data confidenciality](#Data_confidentiality).
+
+Authentication
+--------------
+
+### End User Accounts
+
+When service level authentication is turned on, end users using Hadoop in secure mode needs to be authenticated by Kerberos. The simplest way to do authentication is using `kinit` command of Kerberos.
+
+### User Accounts for Hadoop Daemons
+
+Ensure that HDFS and YARN daemons run as different Unix users, e.g. `hdfs` and `yarn`. Also, ensure that the MapReduce JobHistory server runs as different user such as `mapred`.
+
+It's recommended to have them share a Unix group, for e.g. `hadoop`. See also "[Mapping from user to group](#Mapping_from_user_to_group)" for group management.
+
+| User:Group | Daemons |
+|:---- |:---- |
+| hdfs:hadoop | NameNode, Secondary NameNode, JournalNode, DataNode |
+| yarn:hadoop | ResourceManager, NodeManager |
+| mapred:hadoop | MapReduce JobHistory Server |
+
+### Kerberos principals for Hadoop Daemons and Users
+
+For running hadoop service daemons in Hadoop in secure mode, Kerberos principals are required. Each service reads auhenticate information saved in keytab file with appropriate permission.
+
+HTTP web-consoles should be served by principal different from RPC's one.
+
+Subsections below shows the examples of credentials for Hadoop services.
+
+#### HDFS
+
+The NameNode keytab file, on the NameNode host, should look like the following:
+
+ $ klist -e -k -t /etc/security/keytab/nn.service.keytab
+ Keytab name: FILE:/etc/security/keytab/nn.service.keytab
+ KVNO Timestamp Principal
+ 4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+
+The Secondary NameNode keytab file, on that host, should look like the following:
+
+ $ klist -e -k -t /etc/security/keytab/sn.service.keytab
+ Keytab name: FILE:/etc/security/keytab/sn.service.keytab
+ KVNO Timestamp Principal
+ 4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+
+The DataNode keytab file, on each host, should look like the following:
+
+ $ klist -e -k -t /etc/security/keytab/dn.service.keytab
+ Keytab name: FILE:/etc/security/keytab/dn.service.keytab
+ KVNO Timestamp Principal
+ 4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+
+#### YARN
+
+The ResourceManager keytab file, on the ResourceManager host, should look like the following:
+
+ $ klist -e -k -t /etc/security/keytab/rm.service.keytab
+ Keytab name: FILE:/etc/security/keytab/rm.service.keytab
+ KVNO Timestamp Principal
+ 4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+
+The NodeManager keytab file, on each host, should look like the following:
+
+ $ klist -e -k -t /etc/security/keytab/nm.service.keytab
+ Keytab name: FILE:/etc/security/keytab/nm.service.keytab
+ KVNO Timestamp Principal
+ 4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+
+#### MapReduce JobHistory Server
+
+The MapReduce JobHistory Server keytab file, on that host, should look like the following:
+
+ $ klist -e -k -t /etc/security/keytab/jhs.service.keytab
+ Keytab name: FILE:/etc/security/keytab/jhs.service.keytab
+ KVNO Timestamp Principal
+ 4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
+ 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
+
+### Mapping from Kerberos principal to OS user account
+
+Hadoop maps Kerberos principal to OS user account using the rule specified by `hadoop.security.auth_to_local` which works in the same way as the `auth_to_local` in [Kerberos configuration file (krb5.conf)](http://web.mit.edu/Kerberos/krb5-latest/doc/admin/conf_files/krb5_conf.html). In addition, Hadoop `auth_to_local` mapping supports the **/L** flag that lowercases the returned name.
+
+By default, it picks the first component of principal name as a user name if the realms matches to the `default_realm` (usually defined in /etc/krb5.conf). For example, `host/full.qualified.domain.name@REALM.TLD` is mapped to `host` by default rule.
+
+### Mapping from user to group
+
+Though files on HDFS are associated to owner and group, Hadoop does not have the definition of group by itself. Mapping from user to group is done by OS or LDAP.
+
+You can change a way of mapping by specifying the name of mapping provider as a value of `hadoop.security.group.mapping` See [HDFS Permissions Guide](../hadoop-hdfs/HdfsPermissionsGuide.html) for details.
+
+Practically you need to manage SSO environment using Kerberos with LDAP for Hadoop in secure mode.
+
+### Proxy user
+
+Some products such as Apache Oozie which access the services of Hadoop on behalf of end users need to be able to impersonate end users. See [the doc of proxy user](./Superusers.html) for details.
+
+### Secure DataNode
+
+Because the data transfer protocol of DataNode does not use the RPC framework of Hadoop, DataNode must authenticate itself by using privileged ports which are specified by `dfs.datanode.address` and `dfs.datanode.http.address`. This authentication is based on the assumption that the attacker won't be able to get root privileges.
+
+When you execute `hdfs datanode` command as root, server process binds privileged port at first, then drops privilege and runs as the user account specified by `HADOOP_SECURE_DN_USER`. This startup process uses jsvc installed to `JSVC_HOME`. You must specify `HADOOP_SECURE_DN_USER` and `JSVC_HOME` as environment variables on start up (in hadoop-env.sh).
+
+As of version 2.6.0, SASL can be used to authenticate the data transfer protocol. In this configuration, it is no longer required for secured clusters to start the DataNode as root using jsvc and bind to privileged ports. To enable SASL on data transfer protocol, set `dfs.data.transfer.protection` in hdfs-site.xml, set a non-privileged port for `dfs.datanode.address`, set `dfs.http.policy` to *HTTPS\_ONLY* and make sure the `HADOOP_SECURE_DN_USER` environment variable is not defined. Note that it is not possible to use SASL on data transfer protocol if `dfs.datanode.address` is set to a privileged port. This is required for backwards-compatibility reasons.
+
+In order to migrate an existing cluster that used root authentication to start using SASL instead, first ensure that version 2.6.0 or later has been deployed to all cluster nodes as well as any external applications that need to connect to the cluster. Only versions 2.6.0 and later of the HDFS client can connect to a DataNode that uses SASL for authentication of data transfer protocol, so it is vital that all callers have the correct version before migrating. After version 2.6.0 or later has been deployed everywhere, update configuration of any external applications to enable SASL. If an HDFS client is enabled for SASL, then it can connect successfully to a DataNode running with either root authentication or SASL authentication. Changing configuration for all clients guarantees that subsequent configuration changes on DataNodes will not disrupt the applications. Finally, each individual DataNode can be migrated by changing its configuration and restarting. It is acceptable to have a
mix of some DataNodes running with root authentication and some DataNodes running with SASL authentication temporarily during this migration period, because an HDFS client enabled for SASL can connect to both.
+
+Data confidentiality
+--------------------
+
+### Data Encryption on RPC
+
+The data transfered between hadoop services and clients. Setting `hadoop.rpc.protection` to `"privacy"` in the core-site.xml activate data encryption.
+
+### Data Encryption on Block data transfer.
+
+You need to set `dfs.encrypt.data.transfer` to `"true"` in the hdfs-site.xml in order to activate data encryption for data transfer protocol of DataNode.
+
+Optionally, you may set `dfs.encrypt.data.transfer.algorithm` to either "3des" or "rc4" to choose the specific encryption algorithm. If unspecified, then the configured JCE default on the system is used, which is usually 3DES.
+
+Setting `dfs.encrypt.data.transfer.cipher.suites` to `AES/CTR/NoPadding` activates AES encryption. By default, this is unspecified, so AES is not used. When AES is used, the algorithm specified in `dfs.encrypt.data.transfer.algorithm` is still used during an initial key exchange. The AES key bit length can be configured by setting `dfs.encrypt.data.transfer.cipher.key.bitlength` to 128, 192 or 256. The default is 128.
+
+AES offers the greatest cryptographic strength and the best performance. At this time, 3DES and RC4 have been used more often in Hadoop clusters.
+
+### Data Encryption on HTTP
+
+Data transfer between Web-console and clients are protected by using SSL(HTTPS).
+
+Configuration
+-------------
+
+### Permissions for both HDFS and local fileSystem paths
+
+The following table lists various paths on HDFS and local filesystems (on all nodes) and recommended permissions:
+
+| Filesystem | Path | User:Group | Permissions |
+|:---- |:---- |:---- |:---- |
+| local | `dfs.namenode.name.dir` | hdfs:hadoop | drwx------ |
+| local | `dfs.datanode.data.dir` | hdfs:hadoop | drwx------ |
+| local | $HADOOP\_LOG\_DIR | hdfs:hadoop | drwxrwxr-x |
+| local | $YARN\_LOG\_DIR | yarn:hadoop | drwxrwxr-x |
+| local | `yarn.nodemanager.local-dirs` | yarn:hadoop | drwxr-xr-x |
+| local | `yarn.nodemanager.log-dirs` | yarn:hadoop | drwxr-xr-x |
+| local | container-executor | root:hadoop | --Sr-s--* |
+| local | `conf/container-executor.cfg` | root:hadoop | r-------* |
+| hdfs | / | hdfs:hadoop | drwxr-xr-x |
+| hdfs | /tmp | hdfs:hadoop | drwxrwxrwxt |
+| hdfs | /user | hdfs:hadoop | drwxr-xr-x |
+| hdfs | `yarn.nodemanager.remote-app-log-dir` | yarn:hadoop | drwxrwxrwxt |
+| hdfs | `mapreduce.jobhistory.intermediate-done-dir` | mapred:hadoop | drwxrwxrwxt |
+| hdfs | `mapreduce.jobhistory.done-dir` | mapred:hadoop | drwxr-x--- |
+
+### Common Configurations
+
+In order to turn on RPC authentication in hadoop, set the value of `hadoop.security.authentication` property to `"kerberos"`, and set security related settings listed below appropriately.
+
+The following properties should be in the `core-site.xml` of all the nodes in the cluster.
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `hadoop.security.authentication` | *kerberos* | `simple` : No authentication. (default) `kerberos` : Enable authentication by Kerberos. |
+| `hadoop.security.authorization` | *true* | Enable [RPC service-level authorization](./ServiceLevelAuth.html). |
+| `hadoop.rpc.protection` | *authentication* | *authentication* : authentication only (default) *integrity* : integrity check in addition to authentication *privacy* : data encryption in addition to integrity |
+| `hadoop.security.auth_to_local` | `RULE:`*exp1* `RULE:`*exp2* *...* DEFAULT | The value is string containing new line characters. See [Kerberos documentation](http://web.mit.edu/Kerberos/krb5-latest/doc/admin/conf_files/krb5_conf.html) for format for *exp*. |
+| `hadoop.proxyuser.`*superuser*`.hosts` | | comma separated hosts from which *superuser* access are allowd to impersonation. `*` means wildcard. |
+| `hadoop.proxyuser.`*superuser*`.groups` | | comma separated groups to which users impersonated by *superuser* belongs. `*` means wildcard. |
+
+### NameNode
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `dfs.block.access.token.enable` | *true* | Enable HDFS block access tokens for secure operations. |
+| `dfs.https.enable` | *true* | This value is deprecated. Use dfs.http.policy |
+| `dfs.http.policy` | *HTTP\_ONLY* or *HTTPS\_ONLY* or *HTTP\_AND\_HTTPS* | HTTPS\_ONLY turns off http access. This option takes precedence over the deprecated configuration dfs.https.enable and hadoop.ssl.enabled. If using SASL to authenticate data transfer protocol instead of running DataNode as root and using privileged ports, then this property must be set to *HTTPS\_ONLY* to guarantee authentication of HTTP servers. (See `dfs.data.transfer.protection`.) |
+| `dfs.namenode.https-address` | *nn\_host\_fqdn:50470* | |
+| `dfs.https.port` | *50470* | |
+| `dfs.namenode.keytab.file` | */etc/security/keytab/nn.service.keytab* | Kerberos keytab file for the NameNode. |
+| `dfs.namenode.kerberos.principal` | nn/\_HOST@REALM.TLD | Kerberos principal name for the NameNode. |
+| `dfs.namenode.kerberos.internal.spnego.principal` | HTTP/\_HOST@REALM.TLD | HTTP Kerberos principal name for the NameNode. |
+
+### Secondary NameNode
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `dfs.namenode.secondary.http-address` | *c\_nn\_host\_fqdn:50090* | |
+| `dfs.namenode.secondary.https-port` | *50470* | |
+| `dfs.secondary.namenode.keytab.file` | */etc/security/keytab/sn.service.keytab* | Kerberos keytab file for the Secondary NameNode. |
+| `dfs.secondary.namenode.kerberos.principal` | sn/\_HOST@REALM.TLD | Kerberos principal name for the Secondary NameNode. |
+| `dfs.secondary.namenode.kerberos.internal.spnego.principal` | HTTP/\_HOST@REALM.TLD | HTTP Kerberos principal name for the Secondary NameNode. |
+
+### DataNode
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `dfs.datanode.data.dir.perm` | 700 | |
+| `dfs.datanode.address` | *0.0.0.0:1004* | Secure DataNode must use privileged port in order to assure that the server was started securely. This means that the server must be started via jsvc. Alternatively, this must be set to a non-privileged port if using SASL to authenticate data transfer protocol. (See `dfs.data.transfer.protection`.) |
+| `dfs.datanode.http.address` | *0.0.0.0:1006* | Secure DataNode must use privileged port in order to assure that the server was started securely. This means that the server must be started via jsvc. |
+| `dfs.datanode.https.address` | *0.0.0.0:50470* | |
+| `dfs.datanode.keytab.file` | */etc/security/keytab/dn.service.keytab* | Kerberos keytab file for the DataNode. |
+| `dfs.datanode.kerberos.principal` | dn/\_HOST@REALM.TLD | Kerberos principal name for the DataNode. |
+| `dfs.encrypt.data.transfer` | *false* | set to `true` when using data encryption |
+| `dfs.encrypt.data.transfer.algorithm` | | optionally set to `3des` or `rc4` when using data encryption to control encryption algorithm |
+| `dfs.encrypt.data.transfer.cipher.suites` | | optionally set to `AES/CTR/NoPadding` to activate AES encryption when using data encryption |
+| `dfs.encrypt.data.transfer.cipher.key.bitlength` | | optionally set to `128`, `192` or `256` to control key bit length when using AES with data encryption |
+| `dfs.data.transfer.protection` | | *authentication* : authentication only *integrity* : integrity check in addition to authentication *privacy* : data encryption in addition to integrity This property is unspecified by default. Setting this property enables SASL for authentication of data transfer protocol. If this is enabled, then `dfs.datanode.address` must use a non-privileged port, `dfs.http.policy` must be set to *HTTPS\_ONLY* and the `HADOOP_SECURE_DN_USER` environment variable must be undefined when starting the DataNode process. |
+
+### WebHDFS
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `dfs.web.authentication.kerberos.principal` | http/\_HOST@REALM.TLD | Kerberos keytab file for the WebHDFS. |
+| `dfs.web.authentication.kerberos.keytab` | */etc/security/keytab/http.service.keytab* | Kerberos principal name for WebHDFS. |
+
+### ResourceManager
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.resourcemanager.keytab` | */etc/security/keytab/rm.service.keytab* | Kerberos keytab file for the ResourceManager. |
+| `yarn.resourcemanager.principal` | rm/\_HOST@REALM.TLD | Kerberos principal name for the ResourceManager. |
+
+### NodeManager
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.nodemanager.keytab` | */etc/security/keytab/nm.service.keytab* | Kerberos keytab file for the NodeManager. |
+| `yarn.nodemanager.principal` | nm/\_HOST@REALM.TLD | Kerberos principal name for the NodeManager. |
+| `yarn.nodemanager.container-executor.class` | `org.apache.hadoop.yarn.server.nodemanager.LinuxContainerExecutor` | Use LinuxContainerExecutor. |
+| `yarn.nodemanager.linux-container-executor.group` | *hadoop* | Unix group of the NodeManager. |
+| `yarn.nodemanager.linux-container-executor.path` | */path/to/bin/container-executor* | The path to the executable of Linux container executor. |
+
+### Configuration for WebAppProxy
+
+The `WebAppProxy` provides a proxy between the web applications exported by an application and an end user. If security is enabled it will warn users before accessing a potentially unsafe web application. Authentication and authorization using the proxy is handled just like any other privileged web application.
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.web-proxy.address` | `WebAppProxy` host:port for proxy to AM web apps. | *host:port* if this is the same as `yarn.resourcemanager.webapp.address` or it is not defined then the `ResourceManager` will run the proxy otherwise a standalone proxy server will need to be launched. |
+| `yarn.web-proxy.keytab` | */etc/security/keytab/web-app.service.keytab* | Kerberos keytab file for the WebAppProxy. |
+| `yarn.web-proxy.principal` | wap/\_HOST@REALM.TLD | Kerberos principal name for the WebAppProxy. |
+
+### LinuxContainerExecutor
+
+A `ContainerExecutor` used by YARN framework which define how any *container* launched and controlled.
+
+The following are the available in Hadoop YARN:
+
+| ContainerExecutor | Description |
+|:---- |:---- |
+| `DefaultContainerExecutor` | The default executor which YARN uses to manage container execution. The container process has the same Unix user as the NodeManager. |
+| `LinuxContainerExecutor` | Supported only on GNU/Linux, this executor runs the containers as either the YARN user who submitted the application (when full security is enabled) or as a dedicated user (defaults to nobody) when full security is not enabled. When full security is enabled, this executor requires all user accounts to be created on the cluster nodes where the containers are launched. It uses a *setuid* executable that is included in the Hadoop distribution. The NodeManager uses this executable to launch and kill containers. The setuid executable switches to the user who has submitted the application and launches or kills the containers. For maximum security, this executor sets up restricted permissions and user/group ownership of local files and directories used by the containers such as the shared objects, jars, intermediate files, log files etc. Particularly note that, because of this, except the application owner and NodeManager, no other user can access any of the lo
cal files/directories including those localized as part of the distributed cache. |
+
+To build the LinuxContainerExecutor executable run:
+
+ $ mvn package -Dcontainer-executor.conf.dir=/etc/hadoop/
+
+The path passed in `-Dcontainer-executor.conf.dir` should be the path on the cluster nodes where a configuration file for the setuid executable should be located. The executable should be installed in $HADOOP\_YARN\_HOME/bin.
+
+The executable must have specific permissions: 6050 or --Sr-s--- permissions user-owned by *root* (super-user) and group-owned by a special group (e.g. `hadoop`) of which the NodeManager Unix user is the group member and no ordinary application user is. If any application user belongs to this special group, security will be compromised. This special group name should be specified for the configuration property `yarn.nodemanager.linux-container-executor.group` in both `conf/yarn-site.xml` and `conf/container-executor.cfg`.
+
+For example, let's say that the NodeManager is run as user *yarn* who is part of the groups users and *hadoop*, any of them being the primary group. Let also be that *users* has both *yarn* and another user (application submitter) *alice* as its members, and *alice* does not belong to *hadoop*. Going by the above description, the setuid/setgid executable should be set 6050 or --Sr-s--- with user-owner as *yarn* and group-owner as *hadoop* which has *yarn* as its member (and not *users* which has *alice* also as its member besides *yarn*).
+
+The LinuxTaskController requires that paths including and leading up to the directories specified in `yarn.nodemanager.local-dirs` and `yarn.nodemanager.log-dirs` to be set 755 permissions as described above in the table on permissions on directories.
+
+* `conf/container-executor.cfg`
+
+The executable requires a configuration file called `container-executor.cfg` to be present in the configuration directory passed to the mvn target mentioned above.
+
+The configuration file must be owned by the user running NodeManager (user `yarn` in the above example), group-owned by anyone and should have the permissions 0400 or r--------.
+
+The executable requires following configuration items to be present in the `conf/container-executor.cfg` file. The items should be mentioned as simple key=value pairs, one per-line:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.nodemanager.linux-container-executor.group` | *hadoop* | Unix group of the NodeManager. The group owner of the *container-executor* binary should be this group. Should be same as the value with which the NodeManager is configured. This configuration is required for validating the secure access of the *container-executor* binary. |
+| `banned.users` | hdfs,yarn,mapred,bin | Banned users. |
+| `allowed.system.users` | foo,bar | Allowed system users. |
+| `min.user.id` | 1000 | Prevent other super-users. |
+
+To re-cap, here are the local file-sysytem permissions required for the various paths related to the `LinuxContainerExecutor`:
+
+| Filesystem | Path | User:Group | Permissions |
+|:---- |:---- |:---- |:---- |
+| local | container-executor | root:hadoop | --Sr-s--* |
+| local | `conf/container-executor.cfg` | root:hadoop | r-------* |
+| local | `yarn.nodemanager.local-dirs` | yarn:hadoop | drwxr-xr-x |
+| local | `yarn.nodemanager.log-dirs` | yarn:hadoop | drwxr-xr-x |
+
+### MapReduce JobHistory Server
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `mapreduce.jobhistory.address` | MapReduce JobHistory Server *host:port* | Default port is 10020. |
+| `mapreduce.jobhistory.keytab` | */etc/security/keytab/jhs.service.keytab* | Kerberos keytab file for the MapReduce JobHistory Server. |
+| `mapreduce.jobhistory.principal` | jhs/\_HOST@REALM.TLD | Kerberos principal name for the MapReduce JobHistory Server. |
+
+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/ServiceLevelAuth.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/ServiceLevelAuth.md b/hadoop-common-project/hadoop-common/src/site/markdown/ServiceLevelAuth.md
new file mode 100644
index 0000000..8b4a10f
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/ServiceLevelAuth.md
@@ -0,0 +1,144 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Service Level Authorization Guide
+=================================
+
+* [Service Level Authorization Guide](#Service_Level_Authorization_Guide)
+ * [Purpose](#Purpose)
+ * [Prerequisites](#Prerequisites)
+ * [Overview](#Overview)
+ * [Configuration](#Configuration)
+ * [Enable Service Level Authorization](#Enable_Service_Level_Authorization)
+ * [Hadoop Services and Configuration Properties](#Hadoop_Services_and_Configuration_Properties)
+ * [Access Control Lists](#Access_Control_Lists)
+ * [Refreshing Service Level Authorization Configuration](#Refreshing_Service_Level_Authorization_Configuration)
+ * [Examples](#Examples)
+
+Purpose
+-------
+
+This document describes how to configure and manage Service Level Authorization for Hadoop.
+
+Prerequisites
+-------------
+
+Make sure Hadoop is installed, configured and setup correctly. For more information see:
+
+* [Single Node Setup](./SingleCluster.html) for first-time users.
+* [Cluster Setup](./ClusterSetup.html) for large, distributed clusters.
+
+Overview
+--------
+
+Service Level Authorization is the initial authorization mechanism to ensure clients connecting to a particular Hadoop service have the necessary, pre-configured, permissions and are authorized to access the given service. For example, a MapReduce cluster can use this mechanism to allow a configured list of users/groups to submit jobs.
+
+The `$HADOOP_CONF_DIR/hadoop-policy.xml` configuration file is used to define the access control lists for various Hadoop services.
+
+Service Level Authorization is performed much before to other access control checks such as file-permission checks, access control on job queues etc.
+
+Configuration
+-------------
+
+This section describes how to configure service-level authorization via the configuration file `$HADOOP_CONF_DIR/hadoop-policy.xml`.
+
+### Enable Service Level Authorization
+
+By default, service-level authorization is disabled for Hadoop. To enable it set the configuration property hadoop.security.authorization to true in `$HADOOP_CONF_DIR/core-site.xml`.
+
+### Hadoop Services and Configuration Properties
+
+This section lists the various Hadoop services and their configuration knobs:
+
+| Property | Service |
+|:---- |:---- |
+| security.client.protocol.acl | ACL for ClientProtocol, which is used by user code via the DistributedFileSystem. |
+| security.client.datanode.protocol.acl | ACL for ClientDatanodeProtocol, the client-to-datanode protocol for block recovery. |
+| security.datanode.protocol.acl | ACL for DatanodeProtocol, which is used by datanodes to communicate with the namenode. |
+| security.inter.datanode.protocol.acl | ACL for InterDatanodeProtocol, the inter-datanode protocol for updating generation timestamp. |
+| security.namenode.protocol.acl | ACL for NamenodeProtocol, the protocol used by the secondary namenode to communicate with the namenode. |
+| security.inter.tracker.protocol.acl | ACL for InterTrackerProtocol, used by the tasktrackers to communicate with the jobtracker. |
+| security.job.submission.protocol.acl | ACL for JobSubmissionProtocol, used by job clients to communciate with the jobtracker for job submission, querying job status etc. |
+| security.task.umbilical.protocol.acl | ACL for TaskUmbilicalProtocol, used by the map and reduce tasks to communicate with the parent tasktracker. |
+| security.refresh.policy.protocol.acl | ACL for RefreshAuthorizationPolicyProtocol, used by the dfsadmin and mradmin commands to refresh the security policy in-effect. |
+| security.ha.service.protocol.acl | ACL for HAService protocol used by HAAdmin to manage the active and stand-by states of namenode. |
+
+### Access Control Lists
+
+`$HADOOP_CONF_DIR/hadoop-policy.xml` defines an access control list for each Hadoop service. Every access control list has a simple format:
+
+The list of users and groups are both comma separated list of names. The two lists are separated by a space.
+
+Example: `user1,user2 group1,group2`.
+
+Add a blank at the beginning of the line if only a list of groups is to be provided, equivalently a comma-separated list of users followed by a space or nothing implies only a set of given users.
+
+A special value of `*` implies that all users are allowed to access the service.
+
+If access control list is not defined for a service, the value of `security.service.authorization.default.acl` is applied. If `security.service.authorization.default.acl` is not defined, `*` is applied.
+
+* Blocked Access Control ListsIn some cases, it is required to specify blocked access control list for a service. This specifies the list of users and groups who are not authorized to access the service. The format of the blocked access control list is same as that of access control list. The blocked access control list can be specified via `$HADOOP_CONF_DIR/hadoop-policy.xml`. The property name is derived by suffixing with ".blocked".
+
+ Example: The property name of blocked access control list for `security.client.protocol.acl>> will be <<<security.client.protocol.acl.blocked`
+
+ For a service, it is possible to specify both an access control list and a blocked control list. A user is authorized to access the service if the user is in the access control and not in the blocked access control list.
+
+ If blocked access control list is not defined for a service, the value of `security.service.authorization.default.acl.blocked` is applied. If `security.service.authorization.default.acl.blocked` is not defined, empty blocked access control list is applied.
+
+### Refreshing Service Level Authorization Configuration
+
+The service-level authorization configuration for the NameNode and JobTracker can be changed without restarting either of the Hadoop master daemons. The cluster administrator can change `$HADOOP_CONF_DIR/hadoop-policy.xml` on the master nodes and instruct the NameNode and JobTracker to reload their respective configurations via the `-refreshServiceAcl` switch to `dfsadmin` and `mradmin` commands respectively.
+
+Refresh the service-level authorization configuration for the NameNode:
+
+ $ bin/hadoop dfsadmin -refreshServiceAcl
+
+Refresh the service-level authorization configuration for the JobTracker:
+
+ $ bin/hadoop mradmin -refreshServiceAcl
+
+Of course, one can use the `security.refresh.policy.protocol.acl` property in `$HADOOP_CONF_DIR/hadoop-policy.xml` to restrict access to the ability to refresh the service-level authorization configuration to certain users/groups.
+
+* Access Control using list of ip addresses, host names and ip rangesAccess to a service can be controlled based on the ip address of the client accessing the service. It is possible to restrict access to a service from a set of machines by specifying a list of ip addresses, host names and ip ranges. The property name for each service is derived from the corresponding acl's property name. If the property name of acl is security.client.protocol.acl, property name for the hosts list will be security.client.protocol.hosts.
+
+ If hosts list is not defined for a service, the value of `security.service.authorization.default.hosts` is applied. If `security.service.authorization.default.hosts` is not defined, `*` is applied.
+
+ It is possible to specify a blocked list of hosts. Only those machines which are in the hosts list, but not in the blocked hosts list will be granted access to the service. The property name is derived by suffixing with ".blocked".
+
+ Example: The property name of blocked hosts list for `security.client.protocol.hosts>> will be <<<security.client.protocol.hosts.blocked`
+
+ If blocked hosts list is not defined for a service, the value of `security.service.authorization.default.hosts.blocked` is applied. If `security.service.authorization.default.hosts.blocked` is not defined, empty blocked hosts list is applied.
+
+### Examples
+
+Allow only users `alice`, `bob` and users in the `mapreduce` group to submit jobs to the MapReduce cluster:
+
+ <property>
+ <name>security.job.submission.protocol.acl</name>
+ <value>alice,bob mapreduce</value>
+ </property>
+
+Allow only DataNodes running as the users who belong to the group datanodes to communicate with the NameNode:
+
+ <property>
+ <name>security.datanode.protocol.acl</name>
+ <value>datanodes</value>
+ </property>
+
+Allow any user to talk to the HDFS cluster as a DFSClient:
+
+ <property>
+ <name>security.client.protocol.acl</name>
+ <value>*</value>
+ </property>
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/SingleCluster.md.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/SingleCluster.md.vm b/hadoop-common-project/hadoop-common/src/site/markdown/SingleCluster.md.vm
new file mode 100644
index 0000000..ca5b48c
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/SingleCluster.md.vm
@@ -0,0 +1,232 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+#set ( $H3 = '###' )
+#set ( $H4 = '####' )
+#set ( $H5 = '#####' )
+
+Hadoop: Setting up a Single Node Cluster.
+=========================================
+
+* [Hadoop: Setting up a Single Node Cluster.](#Hadoop:_Setting_up_a_Single_Node_Cluster.)
+ * [Purpose](#Purpose)
+ * [Prerequisites](#Prerequisites)
+ * [Supported Platforms](#Supported_Platforms)
+ * [Required Software](#Required_Software)
+ * [Installing Software](#Installing_Software)
+ * [Download](#Download)
+ * [Prepare to Start the Hadoop Cluster](#Prepare_to_Start_the_Hadoop_Cluster)
+ * [Standalone Operation](#Standalone_Operation)
+ * [Pseudo-Distributed Operation](#Pseudo-Distributed_Operation)
+ * [Configuration](#Configuration)
+ * [Setup passphraseless ssh](#Setup_passphraseless_ssh)
+ * [Execution](#Execution)
+ * [YARN on a Single Node](#YARN_on_a_Single_Node)
+ * [Fully-Distributed Operation](#Fully-Distributed_Operation)
+
+Purpose
+-------
+
+This document describes how to set up and configure a single-node Hadoop installation so that you can quickly perform simple operations using Hadoop MapReduce and the Hadoop Distributed File System (HDFS).
+
+Prerequisites
+-------------
+
+$H3 Supported Platforms
+
+* GNU/Linux is supported as a development and production platform. Hadoop has been demonstrated on GNU/Linux clusters with 2000 nodes.
+
+* Windows is also a supported platform but the followings steps are for Linux only. To set up Hadoop on Windows, see [wiki page](http://wiki.apache.org/hadoop/Hadoop2OnWindows).
+
+$H3 Required Software
+
+Required software for Linux include:
+
+1. Java™ must be installed. Recommended Java versions are described at [HadoopJavaVersions](http://wiki.apache.org/hadoop/HadoopJavaVersions).
+
+2. ssh must be installed and sshd must be running to use the Hadoop scripts that manage remote Hadoop daemons if the optional start and stop scripts are to be used. Additionally, it is recommmended that pdsh also be installed for better ssh resource management.
+
+$H3 Installing Software
+
+If your cluster doesn't have the requisite software you will need to install it.
+
+For example on Ubuntu Linux:
+
+ $ sudo apt-get install ssh
+ $ sudo apt-get install pdsh
+
+Download
+--------
+
+To get a Hadoop distribution, download a recent stable release from one of the [Apache Download Mirrors](http://www.apache.org/dyn/closer.cgi/hadoop/common/).
+
+Prepare to Start the Hadoop Cluster
+-----------------------------------
+
+Unpack the downloaded Hadoop distribution. In the distribution, edit the file `etc/hadoop/hadoop-env.sh` to define some parameters as follows:
+
+ # set to the root of your Java installation
+ export JAVA_HOME=/usr/java/latest
+
+Try the following command:
+
+ $ bin/hadoop
+
+This will display the usage documentation for the hadoop script.
+
+Now you are ready to start your Hadoop cluster in one of the three supported modes:
+
+* [Local (Standalone) Mode](#Standalone_Operation)
+* [Pseudo-Distributed Mode](#Pseudo-Distributed_Operation)
+* [Fully-Distributed Mode](#Fully-Distributed_Operation)
+
+Standalone Operation
+--------------------
+
+By default, Hadoop is configured to run in a non-distributed mode, as a single Java process. This is useful for debugging.
+
+The following example copies the unpacked conf directory to use as input and then finds and displays every match of the given regular expression. Output is written to the given output directory.
+
+ $ mkdir input
+ $ cp etc/hadoop/*.xml input
+ $ bin/hadoop jar share/hadoop/mapreduce/hadoop-mapreduce-examples-${project.version}.jar grep input output 'dfs[a-z.]+'
+ $ cat output/*
+
+Pseudo-Distributed Operation
+----------------------------
+
+Hadoop can also be run on a single-node in a pseudo-distributed mode where each Hadoop daemon runs in a separate Java process.
+
+$H3 Configuration
+
+Use the following:
+
+etc/hadoop/core-site.xml:
+
+ <configuration>
+ <property>
+ <name>fs.defaultFS</name>
+ <value>hdfs://localhost:9000</value>
+ </property>
+ </configuration>
+
+etc/hadoop/hdfs-site.xml:
+
+ <configuration>
+ <property>
+ <name>dfs.replication</name>
+ <value>1</value>
+ </property>
+ </configuration>
+
+$H3 Setup passphraseless ssh
+
+Now check that you can ssh to the localhost without a passphrase:
+
+ $ ssh localhost
+
+If you cannot ssh to localhost without a passphrase, execute the following commands:
+
+ $ ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa
+ $ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
+ $ chmod 0700 ~/.ssh/authorized_keys
+
+$H3 Execution
+
+The following instructions are to run a MapReduce job locally. If you want to execute a job on YARN, see [YARN on Single Node](#YARN_on_Single_Node).
+
+1. Format the filesystem:
+
+ $ bin/hdfs namenode -format
+
+2. Start NameNode daemon and DataNode daemon:
+
+ $ sbin/start-dfs.sh
+
+ The hadoop daemon log output is written to the `$HADOOP_LOG_DIR` directory (defaults to `$HADOOP_HOME/logs`).
+
+3. Browse the web interface for the NameNode; by default it is available at:
+
+ * NameNode - `http://localhost:50070/`
+
+4. Make the HDFS directories required to execute MapReduce jobs:
+
+ $ bin/hdfs dfs -mkdir /user
+ $ bin/hdfs dfs -mkdir /user/<username>
+
+5. Copy the input files into the distributed filesystem:
+
+ $ bin/hdfs dfs -put etc/hadoop input
+
+6. Run some of the examples provided:
+
+ $ bin/hadoop jar share/hadoop/mapreduce/hadoop-mapreduce-examples-${project.version}.jar grep input output 'dfs[a-z.]+'
+
+7. Examine the output files: Copy the output files from the distributed filesystem to the local filesystem and examine them:
+
+ $ bin/hdfs dfs -get output output
+ $ cat output/*
+
+ or
+
+ View the output files on the distributed filesystem:
+
+ $ bin/hdfs dfs -cat output/*
+
+8. When you're done, stop the daemons with:
+
+ $ sbin/stop-dfs.sh
+
+$H3 YARN on a Single Node
+
+You can run a MapReduce job on YARN in a pseudo-distributed mode by setting a few parameters and running ResourceManager daemon and NodeManager daemon in addition.
+
+The following instructions assume that 1. ~ 4. steps of [the above instructions](#Execution) are already executed.
+
+1. Configure parameters as follows:`etc/hadoop/mapred-site.xml`:
+
+ <configuration>
+ <property>
+ <name>mapreduce.framework.name</name>
+ <value>yarn</value>
+ </property>
+ </configuration>
+
+ `etc/hadoop/yarn-site.xml`:
+
+ <configuration>
+ <property>
+ <name>yarn.nodemanager.aux-services</name>
+ <value>mapreduce_shuffle</value>
+ </property>
+ </configuration>
+
+2. Start ResourceManager daemon and NodeManager daemon:
+
+ $ sbin/start-yarn.sh
+
+3. Browse the web interface for the ResourceManager; by default it is available at:
+
+ * ResourceManager - `http://localhost:8088/`
+
+4. Run a MapReduce job.
+
+5. When you're done, stop the daemons with:
+
+ $ sbin/stop-yarn.sh
+
+Fully-Distributed Operation
+---------------------------
+
+For information on setting up fully-distributed, non-trivial clusters see [Cluster Setup](./ClusterSetup.html).
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/SingleNodeSetup.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/SingleNodeSetup.md b/hadoop-common-project/hadoop-common/src/site/markdown/SingleNodeSetup.md
new file mode 100644
index 0000000..fae8b5c
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/SingleNodeSetup.md
@@ -0,0 +1,20 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Single Node Setup
+=================
+
+This page will be removed in the next major release.
+
+See [Single Cluster Setup](./SingleCluster.html) to set up and configure a single-node Hadoop installation.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/Superusers.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/Superusers.md b/hadoop-common-project/hadoop-common/src/site/markdown/Superusers.md
new file mode 100644
index 0000000..8c9fb72
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/Superusers.md
@@ -0,0 +1,106 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Proxy user - Superusers Acting On Behalf Of Other Users
+=======================================================
+
+* [Proxy user - Superusers Acting On Behalf Of Other Users](#Proxy_user_-_Superusers_Acting_On_Behalf_Of_Other_Users)
+ * [Introduction](#Introduction)
+ * [Use Case](#Use_Case)
+ * [Code example](#Code_example)
+ * [Configurations](#Configurations)
+ * [Caveats](#Caveats)
+
+Introduction
+------------
+
+This document describes how a superuser can submit jobs or access hdfs on behalf of another user.
+
+Use Case
+--------
+
+The code example described in the next section is applicable for the following use case.
+
+A superuser with username 'super' wants to submit job and access hdfs on behalf of a user joe. The superuser has kerberos credentials but user joe doesn't have any. The tasks are required to run as user joe and any file accesses on namenode are required to be done as user joe. It is required that user joe can connect to the namenode or job tracker on a connection authenticated with super's kerberos credentials. In other words super is impersonating the user joe.
+
+Some products such as Apache Oozie need this.
+
+Code example
+------------
+
+In this example super's credentials are used for login and a proxy user ugi object is created for joe. The operations are performed within the doAs method of this proxy user ugi object.
+
+ ...
+ //Create ugi for joe. The login user is 'super'.
+ UserGroupInformation ugi =
+ UserGroupInformation.createProxyUser("joe", UserGroupInformation.getLoginUser());
+ ugi.doAs(new PrivilegedExceptionAction<Void>() {
+ public Void run() throws Exception {
+ //Submit a job
+ JobClient jc = new JobClient(conf);
+ jc.submitJob(conf);
+ //OR access hdfs
+ FileSystem fs = FileSystem.get(conf);
+ fs.mkdir(someFilePath);
+ }
+ }
+
+Configurations
+--------------
+
+You can configure proxy user using properties `hadoop.proxyuser.$superuser.hosts` along with either or both of `hadoop.proxyuser.$superuser.groups` and `hadoop.proxyuser.$superuser.users`.
+
+By specifying as below in core-site.xml, the superuser named `super` can connect only from `host1` and `host2` to impersonate a user belonging to `group1` and `group2`.
+
+ <property>
+ <name>hadoop.proxyuser.super.hosts</name>
+ <value>host1,host2</value>
+ </property>
+ <property>
+ <name>hadoop.proxyuser.super.groups</name>
+ <value>group1,group2</value>
+ </property>
+
+If these configurations are not present, impersonation will not be allowed and connection will fail.
+
+If more lax security is preferred, the wildcard value \* may be used to allow impersonation from any host or of any user. For example, by specifying as below in core-site.xml, user named `oozie` accessing from any host can impersonate any user belonging to any group.
+
+ <property>
+ <name>hadoop.proxyuser.oozie.hosts</name>
+ <value>*</value>
+ </property>
+ <property>
+ <name>hadoop.proxyuser.oozie.groups</name>
+ <value>*</value>
+ </property>
+
+The `hadoop.proxyuser.$superuser.hosts` accepts list of ip addresses, ip address ranges in CIDR format and/or host names. For example, by specifying as below, user named `super` accessing from hosts in the range `10.222.0.0-15` and `10.113.221.221` can impersonate `user1` and `user2`.
+
+ <property>
+ <name>hadoop.proxyuser.super.hosts</name>
+ <value>10.222.0.0/16,10.113.221.221</value>
+ </property>
+ <property>
+ <name>hadoop.proxyuser.super.users</name>
+ <value>user1,user2</value>
+ </property>
+
+Caveats
+-------
+
+If the cluster is running in [Secure Mode](./SecureMode.html), the superuser must have kerberos credentials to be able to impersonate another user.
+
+It cannot use delegation tokens for this feature. It would be wrong if superuser adds its own delegation token to the proxy user ugi, as it will allow the proxy user to connect to the service with the privileges of the superuser.
+
+However, if the superuser does want to give a delegation token to joe, it must first impersonate joe and get a delegation token for joe, in the same way as the code example above, and add it to the ugi of joe. In this way the delegation token will have the owner as joe.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/Tracing.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/Tracing.md b/hadoop-common-project/hadoop-common/src/site/markdown/Tracing.md
new file mode 100644
index 0000000..84c95e0
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/Tracing.md
@@ -0,0 +1,182 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Enabling Dapper-like Tracing in Hadoop
+======================================
+
+* [Enabling Dapper-like Tracing in Hadoop](#Enabling_Dapper-like_Tracing_in_Hadoop)
+ * [Dapper-like Tracing in Hadoop](#Dapper-like_Tracing_in_Hadoop)
+ * [HTrace](#HTrace)
+ * [Samplers Configure the samplers in core-site.xml property: hadoop.htrace.sampler. The value can be NeverSampler, AlwaysSampler or ProbabilitySampler. NeverSampler: HTrace is OFF for all spans; AlwaysSampler: HTrace is ON for all spans; ProbabilitySampler: HTrace is ON for some percentage% of top-level spans.](#Samplers_Configure_the_samplers_in_core-site.xml_property:_hadoop.htrace.sampler._The_value_can_be_NeverSampler_AlwaysSampler_or_ProbabilitySampler._NeverSampler:_HTrace_is_OFF_for_all_spans_AlwaysSampler:_HTrace_is_ON_for_all_spans_ProbabilitySampler:_HTrace_is_ON_for_some_percentage_of_top-level_spans.)
+ * [SpanReceivers](#SpanReceivers)
+ * [Setting up ZipkinSpanReceiver](#Setting_up_ZipkinSpanReceiver)
+ * [Dynamic update of tracing configuration](#Dynamic_update_of_tracing_configuration)
+ * [Starting tracing spans by HTrace API](#Starting_tracing_spans_by_HTrace_API)
+ * [Sample code for tracing](#Sample_code_for_tracing)
+
+Dapper-like Tracing in Hadoop
+-----------------------------
+
+### HTrace
+
+[HDFS-5274](https://issues.apache.org/jira/browse/HDFS-5274) added support for tracing requests through HDFS, using the open source tracing library, [Apache HTrace](https://git-wip-us.apache.org/repos/asf/incubator-htrace.git). Setting up tracing is quite simple, however it requires some very minor changes to your client code.
+
+### Samplers Configure the samplers in `core-site.xml` property: `hadoop.htrace.sampler`. The value can be NeverSampler, AlwaysSampler or ProbabilitySampler. NeverSampler: HTrace is OFF for all spans; AlwaysSampler: HTrace is ON for all spans; ProbabilitySampler: HTrace is ON for some percentage% of top-level spans.
+
+ <property>
+ <name>hadoop.htrace.sampler</name>
+ <value>NeverSampler</value>
+ </property>
+
+### SpanReceivers
+
+The tracing system works by collecting information in structs called 'Spans'. It is up to you to choose how you want to receive this information by implementing the SpanReceiver interface, which defines one method:
+
+ public void receiveSpan(Span span);
+
+Configure what SpanReceivers you'd like to use by putting a comma separated list of the fully-qualified class name of classes implementing SpanReceiver in `core-site.xml` property: `hadoop.htrace.spanreceiver.classes`.
+
+ <property>
+ <name>hadoop.htrace.spanreceiver.classes</name>
+ <value>org.apache.htrace.impl.LocalFileSpanReceiver</value>
+ </property>
+ <property>
+ <name>hadoop.htrace.local-file-span-receiver.path</name>
+ <value>/var/log/hadoop/htrace.out</value>
+ </property>
+
+You can omit package name prefix if you use span receiver bundled with HTrace.
+
+ <property>
+ <name>hadoop.htrace.spanreceiver.classes</name>
+ <value>LocalFileSpanReceiver</value>
+ </property>
+
+### Setting up ZipkinSpanReceiver
+
+Instead of implementing SpanReceiver by yourself, you can use `ZipkinSpanReceiver` which uses [Zipkin](https://github.com/twitter/zipkin) for collecting and displaying tracing data.
+
+In order to use `ZipkinSpanReceiver`, you need to download and setup [Zipkin](https://github.com/twitter/zipkin) first.
+
+you also need to add the jar of `htrace-zipkin` to the classpath of Hadoop on each node. Here is example setup procedure.
+
+ $ git clone https://github.com/cloudera/htrace
+ $ cd htrace/htrace-zipkin
+ $ mvn compile assembly:single
+ $ cp target/htrace-zipkin-*-jar-with-dependencies.jar $HADOOP_HOME/share/hadoop/common/lib/
+
+The sample configuration for `ZipkinSpanReceiver` is shown below. By adding these to `core-site.xml` of NameNode and DataNodes, `ZipkinSpanReceiver` is initialized on the startup. You also need this configuration on the client node in addition to the servers.
+
+ <property>
+ <name>hadoop.htrace.spanreceiver.classes</name>
+ <value>ZipkinSpanReceiver</value>
+ </property>
+ <property>
+ <name>hadoop.htrace.zipkin.collector-hostname</name>
+ <value>192.168.1.2</value>
+ </property>
+ <property>
+ <name>hadoop.htrace.zipkin.collector-port</name>
+ <value>9410</value>
+ </property>
+
+### Dynamic update of tracing configuration
+
+You can use `hadoop trace` command to see and update the tracing configuration of each servers. You must specify IPC server address of namenode or datanode by `-host` option. You need to run the command against all servers if you want to update the configuration of all servers.
+
+`hadoop trace -list` shows list of loaded span receivers associated with the id.
+
+ $ hadoop trace -list -host 192.168.56.2:9000
+ ID CLASS
+ 1 org.apache.htrace.impl.LocalFileSpanReceiver
+
+ $ hadoop trace -list -host 192.168.56.2:50020
+ ID CLASS
+ 1 org.apache.htrace.impl.LocalFileSpanReceiver
+
+`hadoop trace -remove` removes span receiver from server. `-remove` options takes id of span receiver as argument.
+
+ $ hadoop trace -remove 1 -host 192.168.56.2:9000
+ Removed trace span receiver 1
+
+`hadoop trace -add` adds span receiver to server. You need to specify the class name of span receiver as argument of `-class` option. You can specify the configuration associated with span receiver by `-Ckey=value` options.
+
+ $ hadoop trace -add -class LocalFileSpanReceiver -Chadoop.htrace.local-file-span-receiver.path=/tmp/htrace.out -host 192.168.56.2:9000
+ Added trace span receiver 2 with configuration hadoop.htrace.local-file-span-receiver.path = /tmp/htrace.out
+
+ $ hadoop trace -list -host 192.168.56.2:9000
+ ID CLASS
+ 2 org.apache.htrace.impl.LocalFileSpanReceiver
+
+### Starting tracing spans by HTrace API
+
+In order to trace, you will need to wrap the traced logic with **tracing span** as shown below. When there is running tracing spans, the tracing information is propagated to servers along with RPC requests.
+
+In addition, you need to initialize `SpanReceiver` once per process.
+
+ import org.apache.hadoop.hdfs.HdfsConfiguration;
+ import org.apache.hadoop.tracing.SpanReceiverHost;
+ import org.apache.htrace.Sampler;
+ import org.apache.htrace.Trace;
+ import org.apache.htrace.TraceScope;
+
+ ...
+
+ SpanReceiverHost.getInstance(new HdfsConfiguration());
+
+ ...
+
+ TraceScope ts = Trace.startSpan("Gets", Sampler.ALWAYS);
+ try {
+ ... // traced logic
+ } finally {
+ if (ts != null) ts.close();
+ }
+
+### Sample code for tracing
+
+The `TracingFsShell.java` shown below is the wrapper of FsShell which start tracing span before invoking HDFS shell command.
+
+ import org.apache.hadoop.conf.Configuration;
+ import org.apache.hadoop.fs.FsShell;
+ import org.apache.hadoop.tracing.SpanReceiverHost;
+ import org.apache.hadoop.util.ToolRunner;
+ import org.apache.htrace.Sampler;
+ import org.apache.htrace.Trace;
+ import org.apache.htrace.TraceScope;
+
+ public class TracingFsShell {
+ public static void main(String argv[]) throws Exception {
+ Configuration conf = new Configuration();
+ FsShell shell = new FsShell();
+ conf.setQuietMode(false);
+ shell.setConf(conf);
+ SpanReceiverHost.getInstance(conf);
+ int res = 0;
+ TraceScope ts = null;
+ try {
+ ts = Trace.startSpan("FsShell", Sampler.ALWAYS);
+ res = ToolRunner.run(shell, argv);
+ } finally {
+ shell.close();
+ if (ts != null) ts.close();
+ }
+ System.exit(res);
+ }
+ }
+
+You can compile and execute this code as shown below.
+
+ $ javac -cp `hadoop classpath` TracingFsShell.java
+ $ java -cp .:`hadoop classpath` TracingFsShell -ls /
[2/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Posted by aw...@apache.org.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/FileSystemShell.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/FileSystemShell.md b/hadoop-common-project/hadoop-common/src/site/markdown/FileSystemShell.md
new file mode 100644
index 0000000..ae3bea8
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/FileSystemShell.md
@@ -0,0 +1,689 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+* [Overview](#Overview)
+ * [appendToFile](#appendToFile)
+ * [cat](#cat)
+ * [checksum](#checksum)
+ * [chgrp](#chgrp)
+ * [chmod](#chmod)
+ * [chown](#chown)
+ * [copyFromLocal](#copyFromLocal)
+ * [copyToLocal](#copyToLocal)
+ * [count](#count)
+ * [cp](#cp)
+ * [createSnapshot](#createSnapshot)
+ * [deleteSnapshot](#deleteSnapshot)
+ * [df](#df)
+ * [du](#du)
+ * [dus](#dus)
+ * [expunge](#expunge)
+ * [find](#find)
+ * [get](#get)
+ * [getfacl](#getfacl)
+ * [getfattr](#getfattr)
+ * [getmerge](#getmerge)
+ * [help](#help)
+ * [ls](#ls)
+ * [lsr](#lsr)
+ * [mkdir](#mkdir)
+ * [moveFromLocal](#moveFromLocal)
+ * [moveToLocal](#moveToLocal)
+ * [mv](#mv)
+ * [put](#put)
+ * [renameSnapshot](#renameSnapshot)
+ * [rm](#rm)
+ * [rmdir](#rmdir)
+ * [rmr](#rmr)
+ * [setfacl](#setfacl)
+ * [setfattr](#setfattr)
+ * [setrep](#setrep)
+ * [stat](#stat)
+ * [tail](#tail)
+ * [test](#test)
+ * [text](#text)
+ * [touchz](#touchz)
+ * [usage](#usage)
+
+Overview
+========
+
+The File System (FS) shell includes various shell-like commands that directly interact with the Hadoop Distributed File System (HDFS) as well as other file systems that Hadoop supports, such as Local FS, HFTP FS, S3 FS, and others. The FS shell is invoked by:
+
+ bin/hadoop fs <args>
+
+All FS shell commands take path URIs as arguments. The URI format is `scheme://authority/path`. For HDFS the scheme is `hdfs`, and for the Local FS the scheme is `file`. The scheme and authority are optional. If not specified, the default scheme specified in the configuration is used. An HDFS file or directory such as /parent/child can be specified as `hdfs://namenodehost/parent/child` or simply as `/parent/child` (given that your configuration is set to point to `hdfs://namenodehost`).
+
+Most of the commands in FS shell behave like corresponding Unix commands. Differences are described with each of the commands. Error information is sent to stderr and the output is sent to stdout.
+
+If HDFS is being used, `hdfs dfs` is a synonym.
+
+See the [Commands Manual](./CommandsManual.html) for generic shell options.
+
+appendToFile
+------------
+
+Usage: `hadoop fs -appendToFile <localsrc> ... <dst> `
+
+Append single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and appends to destination file system.
+
+* `hadoop fs -appendToFile localfile /user/hadoop/hadoopfile`
+* `hadoop fs -appendToFile localfile1 localfile2 /user/hadoop/hadoopfile`
+* `hadoop fs -appendToFile localfile hdfs://nn.example.com/hadoop/hadoopfile`
+* `hadoop fs -appendToFile - hdfs://nn.example.com/hadoop/hadoopfile` Reads the input from stdin.
+
+Exit Code:
+
+Returns 0 on success and 1 on error.
+
+cat
+---
+
+Usage: `hadoop fs -cat URI [URI ...]`
+
+Copies source paths to stdout.
+
+Example:
+
+* `hadoop fs -cat hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2`
+* `hadoop fs -cat file:///file3 /user/hadoop/file4`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+checksum
+--------
+
+Usage: `hadoop fs -checksum URI`
+
+Returns the checksum information of a file.
+
+Example:
+
+* `hadoop fs -checksum hdfs://nn1.example.com/file1`
+* `hadoop fs -checksum file:///etc/hosts`
+
+chgrp
+-----
+
+Usage: `hadoop fs -chgrp [-R] GROUP URI [URI ...]`
+
+Change group association of files. The user must be the owner of files, or else a super-user. Additional information is in the [Permissions Guide](../hadoop-hdfs/HdfsPermissionsGuide.html).
+
+Options
+
+* The -R option will make the change recursively through the directory structure.
+
+chmod
+-----
+
+Usage: `hadoop fs -chmod [-R] <MODE[,MODE]... | OCTALMODE> URI [URI ...]`
+
+Change the permissions of files. With -R, make the change recursively through the directory structure. The user must be the owner of the file, or else a super-user. Additional information is in the [Permissions Guide](../hadoop-hdfs/HdfsPermissionsGuide.html).
+
+Options
+
+* The -R option will make the change recursively through the directory structure.
+
+chown
+-----
+
+Usage: `hadoop fs -chown [-R] [OWNER][:[GROUP]] URI [URI ]`
+
+Change the owner of files. The user must be a super-user. Additional information is in the [Permissions Guide](../hadoop-hdfs/HdfsPermissionsGuide.html).
+
+Options
+
+* The -R option will make the change recursively through the directory structure.
+
+copyFromLocal
+-------------
+
+Usage: `hadoop fs -copyFromLocal <localsrc> URI`
+
+Similar to put command, except that the source is restricted to a local file reference.
+
+Options:
+
+* The -f option will overwrite the destination if it already exists.
+
+copyToLocal
+-----------
+
+Usage: `hadoop fs -copyToLocal [-ignorecrc] [-crc] URI <localdst> `
+
+Similar to get command, except that the destination is restricted to a local file reference.
+
+count
+-----
+
+Usage: `hadoop fs -count [-q] [-h] [-v] <paths> `
+
+Count the number of directories, files and bytes under the paths that match the specified file pattern. The output columns with -count are: DIR\_COUNT, FILE\_COUNT, CONTENT\_SIZE, PATHNAME
+
+The output columns with -count -q are: QUOTA, REMAINING\_QUATA, SPACE\_QUOTA, REMAINING\_SPACE\_QUOTA, DIR\_COUNT, FILE\_COUNT, CONTENT\_SIZE, PATHNAME
+
+The -h option shows sizes in human readable format.
+
+The -v option displays a header line.
+
+Example:
+
+* `hadoop fs -count hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2`
+* `hadoop fs -count -q hdfs://nn1.example.com/file1`
+* `hadoop fs -count -q -h hdfs://nn1.example.com/file1`
+* `hdfs dfs -count -q -h -v hdfs://nn1.example.com/file1`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+cp
+----
+
+Usage: `hadoop fs -cp [-f] [-p | -p[topax]] URI [URI ...] <dest> `
+
+Copy files from source to destination. This command allows multiple sources as well in which case the destination must be a directory.
+
+'raw.\*' namespace extended attributes are preserved if (1) the source and destination filesystems support them (HDFS only), and (2) all source and destination pathnames are in the /.reserved/raw hierarchy. Determination of whether raw.\* namespace xattrs are preserved is independent of the -p (preserve) flag.
+
+Options:
+
+* The -f option will overwrite the destination if it already exists.
+* The -p option will preserve file attributes [topx] (timestamps, ownership, permission, ACL, XAttr). If -p is specified with no *arg*, then preserves timestamps, ownership, permission. If -pa is specified, then preserves permission also because ACL is a super-set of permission. Determination of whether raw namespace extended attributes are preserved is independent of the -p flag.
+
+Example:
+
+* `hadoop fs -cp /user/hadoop/file1 /user/hadoop/file2`
+* `hadoop fs -cp /user/hadoop/file1 /user/hadoop/file2 /user/hadoop/dir`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+createSnapshot
+--------------
+
+See [HDFS Snapshots Guide](../hadoop-hdfs/HdfsSnapshots.html).
+
+deleteSnapshot
+--------------
+
+See [HDFS Snapshots Guide](../hadoop-hdfs/HdfsSnapshots.html).
+
+df
+----
+
+Usage: `hadoop fs -df [-h] URI [URI ...]`
+
+Displays free space.
+
+Options:
+
+* The -h option will format file sizes in a "human-readable" fashion (e.g 64.0m instead of 67108864)
+
+Example:
+
+* `hadoop dfs -df /user/hadoop/dir1`
+
+du
+----
+
+Usage: `hadoop fs -du [-s] [-h] URI [URI ...]`
+
+Displays sizes of files and directories contained in the given directory or the length of a file in case its just a file.
+
+Options:
+
+* The -s option will result in an aggregate summary of file lengths being displayed, rather than the individual files.
+* The -h option will format file sizes in a "human-readable" fashion (e.g 64.0m instead of 67108864)
+
+Example:
+
+* `hadoop fs -du /user/hadoop/dir1 /user/hadoop/file1 hdfs://nn.example.com/user/hadoop/dir1`
+
+Exit Code: Returns 0 on success and -1 on error.
+
+dus
+---
+
+Usage: `hadoop fs -dus <args> `
+
+Displays a summary of file lengths.
+
+**Note:** This command is deprecated. Instead use `hadoop fs -du -s`.
+
+expunge
+-------
+
+Usage: `hadoop fs -expunge`
+
+Empty the Trash. Refer to the [HDFS Architecture Guide](../hadoop-hdfs/HdfsDesign.html) for more information on the Trash feature.
+
+find
+----
+
+Usage: `hadoop fs -find <path> ... <expression> ... `
+
+Finds all files that match the specified expression and applies selected actions to them. If no *path* is specified then defaults to the current working directory. If no expression is specified then defaults to -print.
+
+The following primary expressions are recognised:
+
+* -name pattern<br />-iname pattern
+
+ Evaluates as true if the basename of the file matches the pattern using standard file system globbing. If -iname is used then the match is case insensitive.
+
+* -print<br />-print0Always
+
+ evaluates to true. Causes the current pathname to be written to standard output. If the -print0 expression is used then an ASCII NULL character is appended.
+
+The following operators are recognised:
+
+* expression -a expression<br />expression -and expression<br />expression expression
+
+ Logical AND operator for joining two expressions. Returns true if both child expressions return true. Implied by the juxtaposition of two expressions and so does not need to be explicitly specified. The second expression will not be applied if the first fails.
+
+Example:
+
+`hadoop fs -find / -name test -print`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+get
+---
+
+Usage: `hadoop fs -get [-ignorecrc] [-crc] <src> <localdst> `
+
+Copy files to the local file system. Files that fail the CRC check may be copied with the -ignorecrc option. Files and CRCs may be copied using the -crc option.
+
+Example:
+
+* `hadoop fs -get /user/hadoop/file localfile`
+* `hadoop fs -get hdfs://nn.example.com/user/hadoop/file localfile`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+getfacl
+-------
+
+Usage: `hadoop fs -getfacl [-R] <path> `
+
+Displays the Access Control Lists (ACLs) of files and directories. If a directory has a default ACL, then getfacl also displays the default ACL.
+
+Options:
+
+* -R: List the ACLs of all files and directories recursively.
+* *path*: File or directory to list.
+
+Examples:
+
+* `hadoop fs -getfacl /file`
+* `hadoop fs -getfacl -R /dir`
+
+Exit Code:
+
+Returns 0 on success and non-zero on error.
+
+getfattr
+--------
+
+Usage: `hadoop fs -getfattr [-R] -n name | -d [-e en] <path> `
+
+Displays the extended attribute names and values (if any) for a file or directory.
+
+Options:
+
+* -R: Recursively list the attributes for all files and directories.
+* -n name: Dump the named extended attribute value.
+* -d: Dump all extended attribute values associated with pathname.
+* -e *encoding*: Encode values after retrieving them. Valid encodings are "text", "hex", and "base64". Values encoded as text strings are enclosed in double quotes ("), and values encoded as hexadecimal and base64 are prefixed with 0x and 0s, respectively.
+* *path*: The file or directory.
+
+Examples:
+
+* `hadoop fs -getfattr -d /file`
+* `hadoop fs -getfattr -R -n user.myAttr /dir`
+
+Exit Code:
+
+Returns 0 on success and non-zero on error.
+
+getmerge
+--------
+
+Usage: `hadoop fs -getmerge <src> <localdst> [addnl]`
+
+Takes a source directory and a destination file as input and concatenates files in src into the destination local file. Optionally addnl can be set to enable adding a newline character at the end of each file.
+
+help
+----
+
+Usage: `hadoop fs -help`
+
+Return usage output.
+
+ls
+----
+
+Usage: `hadoop fs -ls [-d] [-h] [-R] [-t] [-S] [-r] [-u] <args> `
+
+Options:
+
+* -d: Directories are listed as plain files.
+* -h: Format file sizes in a human-readable fashion (eg 64.0m instead of 67108864).
+* -R: Recursively list subdirectories encountered.
+* -t: Sort output by modification time (most recent first).
+* -S: Sort output by file size.
+* -r: Reverse the sort order.
+* -u: Use access time rather than modification time for display and sorting.
+
+For a file ls returns stat on the file with the following format:
+
+ permissions number_of_replicas userid groupid filesize modification_date modification_time filename
+
+For a directory it returns list of its direct children as in Unix. A directory is listed as:
+
+ permissions userid groupid modification_date modification_time dirname
+
+Files within a directory are order by filename by default.
+
+Example:
+
+* `hadoop fs -ls /user/hadoop/file1`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+lsr
+---
+
+Usage: `hadoop fs -lsr <args> `
+
+Recursive version of ls.
+
+**Note:** This command is deprecated. Instead use `hadoop fs -ls -R`
+
+mkdir
+-----
+
+Usage: `hadoop fs -mkdir [-p] <paths> `
+
+Takes path uri's as argument and creates directories.
+
+Options:
+
+* The -p option behavior is much like Unix mkdir -p, creating parent directories along the path.
+
+Example:
+
+* `hadoop fs -mkdir /user/hadoop/dir1 /user/hadoop/dir2`
+* `hadoop fs -mkdir hdfs://nn1.example.com/user/hadoop/dir hdfs://nn2.example.com/user/hadoop/dir`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+moveFromLocal
+-------------
+
+Usage: `hadoop fs -moveFromLocal <localsrc> <dst> `
+
+Similar to put command, except that the source localsrc is deleted after it's copied.
+
+moveToLocal
+-----------
+
+Usage: `hadoop fs -moveToLocal [-crc] <src> <dst> `
+
+Displays a "Not implemented yet" message.
+
+mv
+----
+
+Usage: `hadoop fs -mv URI [URI ...] <dest> `
+
+Moves files from source to destination. This command allows multiple sources as well in which case the destination needs to be a directory. Moving files across file systems is not permitted.
+
+Example:
+
+* `hadoop fs -mv /user/hadoop/file1 /user/hadoop/file2`
+* `hadoop fs -mv hdfs://nn.example.com/file1 hdfs://nn.example.com/file2 hdfs://nn.example.com/file3 hdfs://nn.example.com/dir1`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+put
+---
+
+Usage: `hadoop fs -put <localsrc> ... <dst> `
+
+Copy single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and writes to destination file system.
+
+* `hadoop fs -put localfile /user/hadoop/hadoopfile`
+* `hadoop fs -put localfile1 localfile2 /user/hadoop/hadoopdir`
+* `hadoop fs -put localfile hdfs://nn.example.com/hadoop/hadoopfile`
+* `hadoop fs -put - hdfs://nn.example.com/hadoop/hadoopfile` Reads the input from stdin.
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+renameSnapshot
+--------------
+
+See [HDFS Snapshots Guide](../hadoop-hdfs/HdfsSnapshots.html).
+
+rm
+----
+
+Usage: `hadoop fs -rm [-f] [-r |-R] [-skipTrash] URI [URI ...]`
+
+Delete files specified as args.
+
+Options:
+
+* The -f option will not display a diagnostic message or modify the exit status to reflect an error if the file does not exist.
+* The -R option deletes the directory and any content under it recursively.
+* The -r option is equivalent to -R.
+* The -skipTrash option will bypass trash, if enabled, and delete the specified file(s) immediately. This can be useful when it is necessary to delete files from an over-quota directory.
+
+Example:
+
+* `hadoop fs -rm hdfs://nn.example.com/file /user/hadoop/emptydir`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+rmdir
+-----
+
+Usage: `hadoop fs -rmdir [--ignore-fail-on-non-empty] URI [URI ...]`
+
+Delete a directory.
+
+Options:
+
+* `--ignore-fail-on-non-empty`: When using wildcards, do not fail if a directory still contains files.
+
+Example:
+
+* `hadoop fs -rmdir /user/hadoop/emptydir`
+
+rmr
+---
+
+Usage: `hadoop fs -rmr [-skipTrash] URI [URI ...]`
+
+Recursive version of delete.
+
+**Note:** This command is deprecated. Instead use `hadoop fs -rm -r`
+
+setfacl
+-------
+
+Usage: `hadoop fs -setfacl [-R] [-b |-k -m |-x <acl_spec> <path>] |[--set <acl_spec> <path>] `
+
+Sets Access Control Lists (ACLs) of files and directories.
+
+Options:
+
+* -b: Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits.
+* -k: Remove the default ACL.
+* -R: Apply operations to all files and directories recursively.
+* -m: Modify ACL. New entries are added to the ACL, and existing entries are retained.
+* -x: Remove specified ACL entries. Other ACL entries are retained.
+* ``--set``: Fully replace the ACL, discarding all existing entries. The *acl\_spec* must include entries for user, group, and others for compatibility with permission bits.
+* *acl\_spec*: Comma separated list of ACL entries.
+* *path*: File or directory to modify.
+
+Examples:
+
+* `hadoop fs -setfacl -m user:hadoop:rw- /file`
+* `hadoop fs -setfacl -x user:hadoop /file`
+* `hadoop fs -setfacl -b /file`
+* `hadoop fs -setfacl -k /dir`
+* `hadoop fs -setfacl --set user::rw-,user:hadoop:rw-,group::r--,other::r-- /file`
+* `hadoop fs -setfacl -R -m user:hadoop:r-x /dir`
+* `hadoop fs -setfacl -m default:user:hadoop:r-x /dir`
+
+Exit Code:
+
+Returns 0 on success and non-zero on error.
+
+setfattr
+--------
+
+Usage: `hadoop fs -setfattr -n name [-v value] | -x name <path> `
+
+Sets an extended attribute name and value for a file or directory.
+
+Options:
+
+* -b: Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits.
+* -n name: The extended attribute name.
+* -v value: The extended attribute value. There are three different encoding methods for the value. If the argument is enclosed in double quotes, then the value is the string inside the quotes. If the argument is prefixed with 0x or 0X, then it is taken as a hexadecimal number. If the argument begins with 0s or 0S, then it is taken as a base64 encoding.
+* -x name: Remove the extended attribute.
+* *path*: The file or directory.
+
+Examples:
+
+* `hadoop fs -setfattr -n user.myAttr -v myValue /file`
+* `hadoop fs -setfattr -n user.noValue /file`
+* `hadoop fs -setfattr -x user.myAttr /file`
+
+Exit Code:
+
+Returns 0 on success and non-zero on error.
+
+setrep
+------
+
+Usage: `hadoop fs -setrep [-R] [-w] <numReplicas> <path> `
+
+Changes the replication factor of a file. If *path* is a directory then the command recursively changes the replication factor of all files under the directory tree rooted at *path*.
+
+Options:
+
+* The -w flag requests that the command wait for the replication to complete. This can potentially take a very long time.
+* The -R flag is accepted for backwards compatibility. It has no effect.
+
+Example:
+
+* `hadoop fs -setrep -w 3 /user/hadoop/dir1`
+
+Exit Code:
+
+Returns 0 on success and -1 on error.
+
+stat
+----
+
+Usage: `hadoop fs -stat [format] <path> ...`
+
+Print statistics about the file/directory at \<path\> in the specified format. Format accepts filesize in blocks (%b), type (%F), group name of owner (%g), name (%n), block size (%o), replication (%r), user name of owner(%u), and modification date (%y, %Y). %y shows UTC date as "yyyy-MM-dd HH:mm:ss" and %Y shows milliseconds since January 1, 1970 UTC. If the format is not specified, %y is used by default.
+
+Example:
+
+* `hadoop fs -stat "%F %u:%g %b %y %n" /file`
+
+Exit Code: Returns 0 on success and -1 on error.
+
+tail
+----
+
+Usage: `hadoop fs -tail [-f] URI`
+
+Displays last kilobyte of the file to stdout.
+
+Options:
+
+* The -f option will output appended data as the file grows, as in Unix.
+
+Example:
+
+* `hadoop fs -tail pathname`
+
+Exit Code: Returns 0 on success and -1 on error.
+
+test
+----
+
+Usage: `hadoop fs -test -[defsz] URI`
+
+Options:
+
+* -d: f the path is a directory, return 0.
+* -e: if the path exists, return 0.
+* -f: if the path is a file, return 0.
+* -s: if the path is not empty, return 0.
+* -z: if the file is zero length, return 0.
+
+Example:
+
+* `hadoop fs -test -e filename`
+
+text
+----
+
+Usage: `hadoop fs -text <src> `
+
+Takes a source file and outputs the file in text format. The allowed formats are zip and TextRecordInputStream.
+
+touchz
+------
+
+Usage: `hadoop fs -touchz URI [URI ...]`
+
+Create a file of zero length.
+
+Example:
+
+* `hadoop fs -touchz pathname`
+
+Exit Code: Returns 0 on success and -1 on error.
+
+usage
+-----
+
+Usage: `hadoop fs -usage command`
+
+Return the help for an individual command.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/HttpAuthentication.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/HttpAuthentication.md b/hadoop-common-project/hadoop-common/src/site/markdown/HttpAuthentication.md
new file mode 100644
index 0000000..e0a2693
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/HttpAuthentication.md
@@ -0,0 +1,58 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Authentication for Hadoop HTTP web-consoles
+===========================================
+
+* [Authentication for Hadoop HTTP web-consoles](#Authentication_for_Hadoop_HTTP_web-consoles)
+ * [Introduction](#Introduction)
+ * [Configuration](#Configuration)
+
+Introduction
+------------
+
+This document describes how to configure Hadoop HTTP web-consoles to require user authentication.
+
+By default Hadoop HTTP web-consoles (JobTracker, NameNode, TaskTrackers and DataNodes) allow access without any form of authentication.
+
+Similarly to Hadoop RPC, Hadoop HTTP web-consoles can be configured to require Kerberos authentication using HTTP SPNEGO protocol (supported by browsers like Firefox and Internet Explorer).
+
+In addition, Hadoop HTTP web-consoles support the equivalent of Hadoop's Pseudo/Simple authentication. If this option is enabled, user must specify their user name in the first browser interaction using the user.name query string parameter. For example: `http://localhost:50030/jobtracker.jsp?user.name=babu`.
+
+If a custom authentication mechanism is required for the HTTP web-consoles, it is possible to implement a plugin to support the alternate authentication mechanism (refer to Hadoop hadoop-auth for details on writing an `AuthenticatorHandler`).
+
+The next section describes how to configure Hadoop HTTP web-consoles to require user authentication.
+
+Configuration
+-------------
+
+The following properties should be in the `core-site.xml` of all the nodes in the cluster.
+
+`hadoop.http.filter.initializers`: add to this property the `org.apache.hadoop.security.AuthenticationFilterInitializer` initializer class.
+
+`hadoop.http.authentication.type`: Defines authentication used for the HTTP web-consoles. The supported values are: `simple` | `kerberos` | `#AUTHENTICATION_HANDLER_CLASSNAME#`. The dfeault value is `simple`.
+
+`hadoop.http.authentication.token.validity`: Indicates how long (in seconds) an authentication token is valid before it has to be renewed. The default value is `36000`.
+
+`hadoop.http.authentication.signature.secret.file`: The signature secret file for signing the authentication tokens. The same secret should be used for all nodes in the cluster, JobTracker, NameNode, DataNode and TastTracker. The default value is `$user.home/hadoop-http-auth-signature-secret`. IMPORTANT: This file should be readable only by the Unix user running the daemons.
+
+`hadoop.http.authentication.cookie.domain`: The domain to use for the HTTP cookie that stores the authentication token. In order to authentiation to work correctly across all nodes in the cluster the domain must be correctly set. There is no default value, the HTTP cookie will not have a domain working only with the hostname issuing the HTTP cookie.
+
+IMPORTANT: when using IP addresses, browsers ignore cookies with domain settings. For this setting to work properly all nodes in the cluster must be configured to generate URLs with `hostname.domain` names on it.
+
+`hadoop.http.authentication.simple.anonymous.allowed`: Indicates if anonymous requests are allowed when using 'simple' authentication. The default value is `true`
+
+`hadoop.http.authentication.kerberos.principal`: Indicates the Kerberos principal to be used for HTTP endpoint when using 'kerberos' authentication. The principal short name must be `HTTP` per Kerberos HTTP SPNEGO specification. The default value is `HTTP/_HOST@$LOCALHOST`, where `_HOST` -if present- is replaced with bind address of the HTTP server.
+
+`hadoop.http.authentication.kerberos.keytab`: Location of the keytab file with the credentials for the Kerberos principal used for the HTTP endpoint. The default value is `$user.home/hadoop.keytab`.i
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/InterfaceClassification.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/InterfaceClassification.md b/hadoop-common-project/hadoop-common/src/site/markdown/InterfaceClassification.md
new file mode 100644
index 0000000..0392610
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/InterfaceClassification.md
@@ -0,0 +1,105 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Hadoop Interface Taxonomy: Audience and Stability Classification
+================================================================
+
+* [Hadoop Interface Taxonomy: Audience and Stability Classification](#Hadoop_Interface_Taxonomy:_Audience_and_Stability_Classification)
+ * [Motivation](#Motivation)
+ * [Interface Classification](#Interface_Classification)
+ * [Audience](#Audience)
+ * [Stability](#Stability)
+ * [How are the Classifications Recorded?](#How_are_the_Classifications_Recorded)
+ * [FAQ](#FAQ)
+
+Motivation
+----------
+
+The interface taxonomy classification provided here is for guidance to developers and users of interfaces. The classification guides a developer to declare the targeted audience or users of an interface and also its stability.
+
+* Benefits to the user of an interface: Knows which interfaces to use or not use and their stability.
+* Benefits to the developer: to prevent accidental changes of interfaces and hence accidental impact on users or other components or system. This is particularly useful in large systems with many developers who may not all have a shared state/history of the project.
+
+Interface Classification
+------------------------
+
+Hadoop adopts the following interface classification, this classification was derived from the [OpenSolaris taxonomy](http://www.opensolaris.org/os/community/arc/policies/interface-taxonomy/#Advice) and, to some extent, from taxonomy used inside Yahoo. Interfaces have two main attributes: Audience and Stability
+
+### Audience
+
+Audience denotes the potential consumers of the interface. While many interfaces are internal/private to the implementation, other are public/external interfaces are meant for wider consumption by applications and/or clients. For example, in posix, libc is an external or public interface, while large parts of the kernel are internal or private interfaces. Also, some interfaces are targeted towards other specific subsystems.
+
+Identifying the audience of an interface helps define the impact of breaking it. For instance, it might be okay to break the compatibility of an interface whose audience is a small number of specific subsystems. On the other hand, it is probably not okay to break a protocol interfaces that millions of Internet users depend on.
+
+Hadoop uses the following kinds of audience in order of increasing/wider visibility:
+
+* Private:
+ * The interface is for internal use within the project (such as HDFS or MapReduce) and should not be used by applications or by other projects. It is subject to change at anytime without notice. Most interfaces of a project are Private (also referred to as project-private).
+* Limited-Private:
+ * The interface is used by a specified set of projects or systems (typically closely related projects). Other projects or systems should not use the interface. Changes to the interface will be communicated/ negotiated with the specified projects. For example, in the Hadoop project, some interfaces are LimitedPrivate{HDFS, MapReduce} in that they are private to the HDFS and MapReduce projects.
+* Public
+ * The interface is for general use by any application.
+
+Hadoop doesn't have a Company-Private classification, which is meant for APIs which are intended to be used by other projects within the company, since it doesn't apply to opensource projects. Also, certain APIs are annotated as @VisibleForTesting (from com.google.common .annotations.VisibleForTesting) - these are meant to be used strictly for unit tests and should be treated as "Private" APIs.
+
+### Stability
+
+Stability denotes how stable an interface is, as in when incompatible changes to the interface are allowed. Hadoop APIs have the following levels of stability.
+
+* Stable
+ * Can evolve while retaining compatibility for minor release boundaries; in other words, incompatible changes to APIs marked Stable are allowed only at major releases (i.e. at m.0).
+* Evolving
+ * Evolving, but incompatible changes are allowed at minor release (i.e. m .x)
+* Unstable
+ * Incompatible changes to Unstable APIs are allowed any time. This usually makes sense for only private interfaces.
+ * However one may call this out for a supposedly public interface to highlight that it should not be used as an interface; for public interfaces, labeling it as Not-an-interface is probably more appropriate than "Unstable".
+ * Examples of publicly visible interfaces that are unstable (i.e. not-an-interface): GUI, CLIs whose output format will change
+* Deprecated
+ * APIs that could potentially removed in the future and should not be used.
+
+How are the Classifications Recorded?
+-------------------------------------
+
+How will the classification be recorded for Hadoop APIs?
+
+* Each interface or class will have the audience and stability recorded using annotations in org.apache.hadoop.classification package.
+* The javadoc generated by the maven target javadoc:javadoc lists only the public API.
+* One can derive the audience of java classes and java interfaces by the audience of the package in which they are contained. Hence it is useful to declare the audience of each java package as public or private (along with the private audience variations).
+
+FAQ
+---
+
+* Why aren’t the java scopes (private, package private and public) good enough?
+ * Java’s scoping is not very complete. One is often forced to make a class public in order for other internal components to use it. It does not have friends or sub-package-private like C++.
+* But I can easily access a private implementation interface if it is Java public. Where is the protection and control?
+ * The purpose of this is not providing absolute access control. Its purpose is to communicate to users and developers. One can access private implementation functions in libc; however if they change the internal implementation details, your application will break and you will have little sympathy from the folks who are supplying libc. If you use a non-public interface you understand the risks.
+* Why bother declaring the stability of a private interface? Aren’t private interfaces always unstable?
+ * Private interfaces are not always unstable. In the cases where they are stable they capture internal properties of the system and can communicate these properties to its internal users and to developers of the interface.
+ * e.g. In HDFS, NN-DN protocol is private but stable and can help implement rolling upgrades. It communicates that this interface should not be changed in incompatible ways even though it is private.
+ * e.g. In HDFS, FSImage stability can help provide more flexible roll backs.
+* What is the harm in applications using a private interface that is stable? How is it different than a public stable interface?
+ * While a private interface marked as stable is targeted to change only at major releases, it may break at other times if the providers of that interface are willing to changes the internal users of that interface. Further, a public stable interface is less likely to break even at major releases (even though it is allowed to break compatibility) because the impact of the change is larger. If you use a private interface (regardless of its stability) you run the risk of incompatibility.
+* Why bother with Limited-private? Isn’t it giving special treatment to some projects? That is not fair.
+ * First, most interfaces should be public or private; actually let us state it even stronger: make it private unless you really want to expose it to public for general use.
+ * Limited-private is for interfaces that are not intended for general use. They are exposed to related projects that need special hooks. Such a classification has a cost to both the supplier and consumer of the limited interface. Both will have to work together if ever there is a need to break the interface in the future; for example the supplier and the consumers will have to work together to get coordinated releases of their respective projects. This should not be taken lightly – if you can get away with private then do so; if the interface is really for general use for all applications then do so. But remember that making an interface public has huge responsibility. Sometimes Limited-private is just right.
+ * A good example of a limited-private interface is BlockLocations, This is fairly low-level interface that we are willing to expose to MR and perhaps HBase. We are likely to change it down the road and at that time we will have get a coordinated effort with the MR team to release matching releases. While MR and HDFS are always released in sync today, they may change down the road.
+ * If you have a limited-private interface with many projects listed then you are fooling yourself. It is practically public.
+ * It might be worth declaring a special audience classification called Hadoop-Private for the Hadoop family.
+* Lets treat all private interfaces as Hadoop-private. What is the harm in projects in the Hadoop family have access to private classes?
+ * Do we want MR accessing class files that are implementation details inside HDFS. There used to be many such layer violations in the code that we have been cleaning up over the last few years. We don’t want such layer violations to creep back in by no separating between the major components like HDFS and MR.
+* Aren't all public interfaces stable?
+ * One may mark a public interface as evolving in its early days. Here one is promising to make an effort to make compatible changes but may need to break it at minor releases.
+ * One example of a public interface that is unstable is where one is providing an implementation of a standards-body based interface that is still under development. For example, many companies, in an attampt to be first to market, have provided implementations of a new NFS protocol even when the protocol was not fully completed by IETF. The implementor cannot evolve the interface in a fashion that causes least distruption because the stability is controlled by the standards body. Hence it is appropriate to label the interface as unstable.
+
+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/Metrics.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/Metrics.md b/hadoop-common-project/hadoop-common/src/site/markdown/Metrics.md
new file mode 100644
index 0000000..dbcf0d8
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/Metrics.md
@@ -0,0 +1,456 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+* [Overview](#Overview)
+* [jvm context](#jvm_context)
+ * [JvmMetrics](#JvmMetrics)
+* [rpc context](#rpc_context)
+ * [rpc](#rpc)
+ * [RetryCache/NameNodeRetryCache](#RetryCacheNameNodeRetryCache)
+* [rpcdetailed context](#rpcdetailed_context)
+ * [rpcdetailed](#rpcdetailed)
+* [dfs context](#dfs_context)
+ * [namenode](#namenode)
+ * [FSNamesystem](#FSNamesystem)
+ * [JournalNode](#JournalNode)
+ * [datanode](#datanode)
+* [yarn context](#yarn_context)
+ * [ClusterMetrics](#ClusterMetrics)
+ * [QueueMetrics](#QueueMetrics)
+ * [NodeManagerMetrics](#NodeManagerMetrics)
+* [ugi context](#ugi_context)
+ * [UgiMetrics](#UgiMetrics)
+* [metricssystem context](#metricssystem_context)
+ * [MetricsSystem](#MetricsSystem)
+* [default context](#default_context)
+ * [StartupProgress](#StartupProgress)
+
+Overview
+========
+
+Metrics are statistical information exposed by Hadoop daemons, used for monitoring, performance tuning and debug. There are many metrics available by default and they are very useful for troubleshooting. This page shows the details of the available metrics.
+
+Each section describes each context into which metrics are grouped.
+
+The documentation of Metrics 2.0 framework is [here](../../api/org/apache/hadoop/metrics2/package-summary.html).
+
+jvm context
+===========
+
+JvmMetrics
+----------
+
+Each metrics record contains tags such as ProcessName, SessionID and Hostname as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `MemNonHeapUsedM` | Current non-heap memory used in MB |
+| `MemNonHeapCommittedM` | Current non-heap memory committed in MB |
+| `MemNonHeapMaxM` | Max non-heap memory size in MB |
+| `MemHeapUsedM` | Current heap memory used in MB |
+| `MemHeapCommittedM` | Current heap memory committed in MB |
+| `MemHeapMaxM` | Max heap memory size in MB |
+| `MemMaxM` | Max memory size in MB |
+| `ThreadsNew` | Current number of NEW threads |
+| `ThreadsRunnable` | Current number of RUNNABLE threads |
+| `ThreadsBlocked` | Current number of BLOCKED threads |
+| `ThreadsWaiting` | Current number of WAITING threads |
+| `ThreadsTimedWaiting` | Current number of TIMED\_WAITING threads |
+| `ThreadsTerminated` | Current number of TERMINATED threads |
+| `GcInfo` | Total GC count and GC time in msec, grouped by the kind of GC. ex.) GcCountPS Scavenge=6, GCTimeMillisPS Scavenge=40, GCCountPS MarkSweep=0, GCTimeMillisPS MarkSweep=0 |
+| `GcCount` | Total GC count |
+| `GcTimeMillis` | Total GC time in msec |
+| `LogFatal` | Total number of FATAL logs |
+| `LogError` | Total number of ERROR logs |
+| `LogWarn` | Total number of WARN logs |
+| `LogInfo` | Total number of INFO logs |
+| `GcNumWarnThresholdExceeded` | Number of times that the GC warn threshold is exceeded |
+| `GcNumInfoThresholdExceeded` | Number of times that the GC info threshold is exceeded |
+| `GcTotalExtraSleepTime` | Total GC extra sleep time in msec |
+
+rpc context
+===========
+
+rpc
+---
+
+Each metrics record contains tags such as Hostname and port (number to which server is bound) as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `ReceivedBytes` | Total number of received bytes |
+| `SentBytes` | Total number of sent bytes |
+| `RpcQueueTimeNumOps` | Total number of RPC calls |
+| `RpcQueueTimeAvgTime` | Average queue time in milliseconds |
+| `RpcProcessingTimeNumOps` | Total number of RPC calls (same to RpcQueueTimeNumOps) |
+| `RpcProcessingAvgTime` | Average Processing time in milliseconds |
+| `RpcAuthenticationFailures` | Total number of authentication failures |
+| `RpcAuthenticationSuccesses` | Total number of authentication successes |
+| `RpcAuthorizationFailures` | Total number of authorization failures |
+| `RpcAuthorizationSuccesses` | Total number of authorization successes |
+| `NumOpenConnections` | Current number of open connections |
+| `CallQueueLength` | Current length of the call queue |
+| `rpcQueueTime`*num*`sNumOps` | Shows total number of RPC calls (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcQueueTime`*num*`s50thPercentileLatency` | Shows the 50th percentile of RPC queue time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcQueueTime`*num*`s75thPercentileLatency` | Shows the 75th percentile of RPC queue time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcQueueTime`*num*`s90thPercentileLatency` | Shows the 90th percentile of RPC queue time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcQueueTime`*num*`s95thPercentileLatency` | Shows the 95th percentile of RPC queue time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcQueueTime`*num*`s99thPercentileLatency` | Shows the 99th percentile of RPC queue time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcProcessingTime`*num*`sNumOps` | Shows total number of RPC calls (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcProcessingTime`*num*`s50thPercentileLatency` | Shows the 50th percentile of RPC processing time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcProcessingTime`*num*`s75thPercentileLatency` | Shows the 75th percentile of RPC processing time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcProcessingTime`*num*`s90thPercentileLatency` | Shows the 90th percentile of RPC processing time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcProcessingTime`*num*`s95thPercentileLatency` | Shows the 95th percentile of RPC processing time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+| `rpcProcessingTime`*num*`s99thPercentileLatency` | Shows the 99th percentile of RPC processing time in milliseconds (*num* seconds granularity) if `rpc.metrics.quantile.enable` is set to true. *num* is specified by `rpc.metrics.percentiles.intervals`. |
+
+RetryCache/NameNodeRetryCache
+-----------------------------
+
+RetryCache metrics is useful to monitor NameNode fail-over. Each metrics record contains Hostname tag.
+
+| Name | Description |
+|:---- |:---- |
+| `CacheHit` | Total number of RetryCache hit |
+| `CacheCleared` | Total number of RetryCache cleared |
+| `CacheUpdated` | Total number of RetryCache updated |
+
+rpcdetailed context
+===================
+
+Metrics of rpcdetailed context are exposed in unified manner by RPC layer. Two metrics are exposed for each RPC based on its name. Metrics named "(RPC method name)NumOps" indicates total number of method calls, and metrics named "(RPC method name)AvgTime" shows average turn around time for method calls in milliseconds.
+
+rpcdetailed
+-----------
+
+Each metrics record contains tags such as Hostname and port (number to which server is bound) as additional information along with metrics.
+
+The Metrics about RPCs which is not called are not included in metrics record.
+
+| Name | Description |
+|:---- |:---- |
+| *methodname*`NumOps` | Total number of the times the method is called |
+| *methodname*`AvgTime` | Average turn around time of the method in milliseconds |
+
+dfs context
+===========
+
+namenode
+--------
+
+Each metrics record contains tags such as ProcessName, SessionId, and Hostname as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `CreateFileOps` | Total number of files created |
+| `FilesCreated` | Total number of files and directories created by create or mkdir operations |
+| `FilesAppended` | Total number of files appended |
+| `GetBlockLocations` | Total number of getBlockLocations operations |
+| `FilesRenamed` | Total number of rename **operations** (NOT number of files/dirs renamed) |
+| `GetListingOps` | Total number of directory listing operations |
+| `DeleteFileOps` | Total number of delete operations |
+| `FilesDeleted` | Total number of files and directories deleted by delete or rename operations |
+| `FileInfoOps` | Total number of getFileInfo and getLinkFileInfo operations |
+| `AddBlockOps` | Total number of addBlock operations succeeded |
+| `GetAdditionalDatanodeOps` | Total number of getAdditionalDatanode operations |
+| `CreateSymlinkOps` | Total number of createSymlink operations |
+| `GetLinkTargetOps` | Total number of getLinkTarget operations |
+| `FilesInGetListingOps` | Total number of files and directories listed by directory listing operations |
+| `AllowSnapshotOps` | Total number of allowSnapshot operations |
+| `DisallowSnapshotOps` | Total number of disallowSnapshot operations |
+| `CreateSnapshotOps` | Total number of createSnapshot operations |
+| `DeleteSnapshotOps` | Total number of deleteSnapshot operations |
+| `RenameSnapshotOps` | Total number of renameSnapshot operations |
+| `ListSnapshottableDirOps` | Total number of snapshottableDirectoryStatus operations |
+| `SnapshotDiffReportOps` | Total number of getSnapshotDiffReport operations |
+| `TransactionsNumOps` | Total number of Journal transactions |
+| `TransactionsAvgTime` | Average time of Journal transactions in milliseconds |
+| `SyncsNumOps` | Total number of Journal syncs |
+| `SyncsAvgTime` | Average time of Journal syncs in milliseconds |
+| `TransactionsBatchedInSync` | Total number of Journal transactions batched in sync |
+| `BlockReportNumOps` | Total number of processing block reports from DataNode |
+| `BlockReportAvgTime` | Average time of processing block reports in milliseconds |
+| `CacheReportNumOps` | Total number of processing cache reports from DataNode |
+| `CacheReportAvgTime` | Average time of processing cache reports in milliseconds |
+| `SafeModeTime` | The interval between FSNameSystem starts and the last time safemode leaves in milliseconds. (sometimes not equal to the time in SafeMode, see [HDFS-5156](https://issues.apache.org/jira/browse/HDFS-5156)) |
+| `FsImageLoadTime` | Time loading FS Image at startup in milliseconds |
+| `FsImageLoadTime` | Time loading FS Image at startup in milliseconds |
+| `GetEditNumOps` | Total number of edits downloads from SecondaryNameNode |
+| `GetEditAvgTime` | Average edits download time in milliseconds |
+| `GetImageNumOps` | Total number of fsimage downloads from SecondaryNameNode |
+| `GetImageAvgTime` | Average fsimage download time in milliseconds |
+| `PutImageNumOps` | Total number of fsimage uploads to SecondaryNameNode |
+| `PutImageAvgTime` | Average fsimage upload time in milliseconds |
+
+FSNamesystem
+------------
+
+Each metrics record contains tags such as HAState and Hostname as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `MissingBlocks` | Current number of missing blocks |
+| `ExpiredHeartbeats` | Total number of expired heartbeats |
+| `TransactionsSinceLastCheckpoint` | Total number of transactions since last checkpoint |
+| `TransactionsSinceLastLogRoll` | Total number of transactions since last edit log roll |
+| `LastWrittenTransactionId` | Last transaction ID written to the edit log |
+| `LastCheckpointTime` | Time in milliseconds since epoch of last checkpoint |
+| `CapacityTotal` | Current raw capacity of DataNodes in bytes |
+| `CapacityTotalGB` | Current raw capacity of DataNodes in GB |
+| `CapacityUsed` | Current used capacity across all DataNodes in bytes |
+| `CapacityUsedGB` | Current used capacity across all DataNodes in GB |
+| `CapacityRemaining` | Current remaining capacity in bytes |
+| `CapacityRemainingGB` | Current remaining capacity in GB |
+| `CapacityUsedNonDFS` | Current space used by DataNodes for non DFS purposes in bytes |
+| `TotalLoad` | Current number of connections |
+| `SnapshottableDirectories` | Current number of snapshottable directories |
+| `Snapshots` | Current number of snapshots |
+| `BlocksTotal` | Current number of allocated blocks in the system |
+| `FilesTotal` | Current number of files and directories |
+| `PendingReplicationBlocks` | Current number of blocks pending to be replicated |
+| `UnderReplicatedBlocks` | Current number of blocks under replicated |
+| `CorruptBlocks` | Current number of blocks with corrupt replicas. |
+| `ScheduledReplicationBlocks` | Current number of blocks scheduled for replications |
+| `PendingDeletionBlocks` | Current number of blocks pending deletion |
+| `ExcessBlocks` | Current number of excess blocks |
+| `PostponedMisreplicatedBlocks` | (HA-only) Current number of blocks postponed to replicate |
+| `PendingDataNodeMessageCourt` | (HA-only) Current number of pending block-related messages for later processing in the standby NameNode |
+| `MillisSinceLastLoadedEdits` | (HA-only) Time in milliseconds since the last time standby NameNode load edit log. In active NameNode, set to 0 |
+| `BlockCapacity` | Current number of block capacity |
+| `StaleDataNodes` | Current number of DataNodes marked stale due to delayed heartbeat |
+| `TotalFiles` | Current number of files and directories (same as FilesTotal) |
+
+JournalNode
+-----------
+
+The server-side metrics for a journal from the JournalNode's perspective. Each metrics record contains Hostname tag as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `Syncs60sNumOps` | Number of sync operations (1 minute granularity) |
+| `Syncs60s50thPercentileLatencyMicros` | The 50th percentile of sync latency in microseconds (1 minute granularity) |
+| `Syncs60s75thPercentileLatencyMicros` | The 75th percentile of sync latency in microseconds (1 minute granularity) |
+| `Syncs60s90thPercentileLatencyMicros` | The 90th percentile of sync latency in microseconds (1 minute granularity) |
+| `Syncs60s95thPercentileLatencyMicros` | The 95th percentile of sync latency in microseconds (1 minute granularity) |
+| `Syncs60s99thPercentileLatencyMicros` | The 99th percentile of sync latency in microseconds (1 minute granularity) |
+| `Syncs300sNumOps` | Number of sync operations (5 minutes granularity) |
+| `Syncs300s50thPercentileLatencyMicros` | The 50th percentile of sync latency in microseconds (5 minutes granularity) |
+| `Syncs300s75thPercentileLatencyMicros` | The 75th percentile of sync latency in microseconds (5 minutes granularity) |
+| `Syncs300s90thPercentileLatencyMicros` | The 90th percentile of sync latency in microseconds (5 minutes granularity) |
+| `Syncs300s95thPercentileLatencyMicros` | The 95th percentile of sync latency in microseconds (5 minutes granularity) |
+| `Syncs300s99thPercentileLatencyMicros` | The 99th percentile of sync latency in microseconds (5 minutes granularity) |
+| `Syncs3600sNumOps` | Number of sync operations (1 hour granularity) |
+| `Syncs3600s50thPercentileLatencyMicros` | The 50th percentile of sync latency in microseconds (1 hour granularity) |
+| `Syncs3600s75thPercentileLatencyMicros` | The 75th percentile of sync latency in microseconds (1 hour granularity) |
+| `Syncs3600s90thPercentileLatencyMicros` | The 90th percentile of sync latency in microseconds (1 hour granularity) |
+| `Syncs3600s95thPercentileLatencyMicros` | The 95th percentile of sync latency in microseconds (1 hour granularity) |
+| `Syncs3600s99thPercentileLatencyMicros` | The 99th percentile of sync latency in microseconds (1 hour granularity) |
+| `BatchesWritten` | Total number of batches written since startup |
+| `TxnsWritten` | Total number of transactions written since startup |
+| `BytesWritten` | Total number of bytes written since startup |
+| `BatchesWrittenWhileLagging` | Total number of batches written where this node was lagging |
+| `LastWriterEpoch` | Current writer's epoch number |
+| `CurrentLagTxns` | The number of transactions that this JournalNode is lagging |
+| `LastWrittenTxId` | The highest transaction id stored on this JournalNode |
+| `LastPromisedEpoch` | The last epoch number which this node has promised not to accept any lower epoch, or 0 if no promises have been made |
+
+datanode
+--------
+
+Each metrics record contains tags such as SessionId and Hostname as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `BytesWritten` | Total number of bytes written to DataNode |
+| `BytesRead` | Total number of bytes read from DataNode |
+| `BlocksWritten` | Total number of blocks written to DataNode |
+| `BlocksRead` | Total number of blocks read from DataNode |
+| `BlocksReplicated` | Total number of blocks replicated |
+| `BlocksRemoved` | Total number of blocks removed |
+| `BlocksVerified` | Total number of blocks verified |
+| `BlockVerificationFailures` | Total number of verifications failures |
+| `BlocksCached` | Total number of blocks cached |
+| `BlocksUncached` | Total number of blocks uncached |
+| `ReadsFromLocalClient` | Total number of read operations from local client |
+| `ReadsFromRemoteClient` | Total number of read operations from remote client |
+| `WritesFromLocalClient` | Total number of write operations from local client |
+| `WritesFromRemoteClient` | Total number of write operations from remote client |
+| `BlocksGetLocalPathInfo` | Total number of operations to get local path names of blocks |
+| `FsyncCount` | Total number of fsync |
+| `VolumeFailures` | Total number of volume failures occurred |
+| `ReadBlockOpNumOps` | Total number of read operations |
+| `ReadBlockOpAvgTime` | Average time of read operations in milliseconds |
+| `WriteBlockOpNumOps` | Total number of write operations |
+| `WriteBlockOpAvgTime` | Average time of write operations in milliseconds |
+| `BlockChecksumOpNumOps` | Total number of blockChecksum operations |
+| `BlockChecksumOpAvgTime` | Average time of blockChecksum operations in milliseconds |
+| `CopyBlockOpNumOps` | Total number of block copy operations |
+| `CopyBlockOpAvgTime` | Average time of block copy operations in milliseconds |
+| `ReplaceBlockOpNumOps` | Total number of block replace operations |
+| `ReplaceBlockOpAvgTime` | Average time of block replace operations in milliseconds |
+| `HeartbeatsNumOps` | Total number of heartbeats |
+| `HeartbeatsAvgTime` | Average heartbeat time in milliseconds |
+| `BlockReportsNumOps` | Total number of block report operations |
+| `BlockReportsAvgTime` | Average time of block report operations in milliseconds |
+| `CacheReportsNumOps` | Total number of cache report operations |
+| `CacheReportsAvgTime` | Average time of cache report operations in milliseconds |
+| `PacketAckRoundTripTimeNanosNumOps` | Total number of ack round trip |
+| `PacketAckRoundTripTimeNanosAvgTime` | Average time from ack send to receive minus the downstream ack time in nanoseconds |
+| `FlushNanosNumOps` | Total number of flushes |
+| `FlushNanosAvgTime` | Average flush time in nanoseconds |
+| `FsyncNanosNumOps` | Total number of fsync |
+| `FsyncNanosAvgTime` | Average fsync time in nanoseconds |
+| `SendDataPacketBlockedOnNetworkNanosNumOps` | Total number of sending packets |
+| `SendDataPacketBlockedOnNetworkNanosAvgTime` | Average waiting time of sending packets in nanoseconds |
+| `SendDataPacketTransferNanosNumOps` | Total number of sending packets |
+| `SendDataPacketTransferNanosAvgTime` | Average transfer time of sending packets in nanoseconds |
+
+yarn context
+============
+
+ClusterMetrics
+--------------
+
+ClusterMetrics shows the metrics of the YARN cluster from the ResourceManager's perspective. Each metrics record contains Hostname tag as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `NumActiveNMs` | Current number of active NodeManagers |
+| `NumDecommissionedNMs` | Current number of decommissioned NodeManagers |
+| `NumLostNMs` | Current number of lost NodeManagers for not sending heartbeats |
+| `NumUnhealthyNMs` | Current number of unhealthy NodeManagers |
+| `NumRebootedNMs` | Current number of rebooted NodeManagers |
+
+QueueMetrics
+------------
+
+QueueMetrics shows an application queue from the ResourceManager's perspective. Each metrics record shows the statistics of each queue, and contains tags such as queue name and Hostname as additional information along with metrics.
+
+In `running_`*num* metrics such as `running_0`, you can set the property `yarn.resourcemanager.metrics.runtime.buckets` in yarn-site.xml to change the buckets. The default values is `60,300,1440`.
+
+| Name | Description |
+|:---- |:---- |
+| `running_0` | Current number of running applications whose elapsed time are less than 60 minutes |
+| `running_60` | Current number of running applications whose elapsed time are between 60 and 300 minutes |
+| `running_300` | Current number of running applications whose elapsed time are between 300 and 1440 minutes |
+| `running_1440` | Current number of running applications elapsed time are more than 1440 minutes |
+| `AppsSubmitted` | Total number of submitted applications |
+| `AppsRunning` | Current number of running applications |
+| `AppsPending` | Current number of applications that have not yet been assigned by any containers |
+| `AppsCompleted` | Total number of completed applications |
+| `AppsKilled` | Total number of killed applications |
+| `AppsFailed` | Total number of failed applications |
+| `AllocatedMB` | Current allocated memory in MB |
+| `AllocatedVCores` | Current allocated CPU in virtual cores |
+| `AllocatedContainers` | Current number of allocated containers |
+| `AggregateContainersAllocated` | Total number of allocated containers |
+| `AggregateContainersReleased` | Total number of released containers |
+| `AvailableMB` | Current available memory in MB |
+| `AvailableVCores` | Current available CPU in virtual cores |
+| `PendingMB` | Current pending memory resource requests in MB that are not yet fulfilled by the scheduler |
+| `PendingVCores` | Current pending CPU allocation requests in virtual cores that are not yet fulfilled by the scheduler |
+| `PendingContainers` | Current pending resource requests that are not yet fulfilled by the scheduler |
+| `ReservedMB` | Current reserved memory in MB |
+| `ReservedVCores` | Current reserved CPU in virtual cores |
+| `ReservedContainers` | Current number of reserved containers |
+| `ActiveUsers` | Current number of active users |
+| `ActiveApplications` | Current number of active applications |
+| `FairShareMB` | (FairScheduler only) Current fair share of memory in MB |
+| `FairShareVCores` | (FairScheduler only) Current fair share of CPU in virtual cores |
+| `MinShareMB` | (FairScheduler only) Minimum share of memory in MB |
+| `MinShareVCores` | (FairScheduler only) Minimum share of CPU in virtual cores |
+| `MaxShareMB` | (FairScheduler only) Maximum share of memory in MB |
+| `MaxShareVCores` | (FairScheduler only) Maximum share of CPU in virtual cores |
+
+NodeManagerMetrics
+------------------
+
+NodeManagerMetrics shows the statistics of the containers in the node. Each metrics record contains Hostname tag as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `containersLaunched` | Total number of launched containers |
+| `containersCompleted` | Total number of successfully completed containers |
+| `containersFailed` | Total number of failed containers |
+| `containersKilled` | Total number of killed containers |
+| `containersIniting` | Current number of initializing containers |
+| `containersRunning` | Current number of running containers |
+| `allocatedContainers` | Current number of allocated containers |
+| `allocatedGB` | Current allocated memory in GB |
+| `availableGB` | Current available memory in GB |
+
+ugi context
+===========
+
+UgiMetrics
+----------
+
+UgiMetrics is related to user and group information. Each metrics record contains Hostname tag as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `LoginSuccessNumOps` | Total number of successful kerberos logins |
+| `LoginSuccessAvgTime` | Average time for successful kerberos logins in milliseconds |
+| `LoginFailureNumOps` | Total number of failed kerberos logins |
+| `LoginFailureAvgTime` | Average time for failed kerberos logins in milliseconds |
+| `getGroupsNumOps` | Total number of group resolutions |
+| `getGroupsAvgTime` | Average time for group resolution in milliseconds |
+| `getGroups`*num*`sNumOps` | Total number of group resolutions (*num* seconds granularity). *num* is specified by `hadoop.user.group.metrics.percentiles.intervals`. |
+| `getGroups`*num*`s50thPercentileLatency` | Shows the 50th percentile of group resolution time in milliseconds (*num* seconds granularity). *num* is specified by `hadoop.user.group.metrics.percentiles.intervals`. |
+| `getGroups`*num*`s75thPercentileLatency` | Shows the 75th percentile of group resolution time in milliseconds (*num* seconds granularity). *num* is specified by `hadoop.user.group.metrics.percentiles.intervals`. |
+| `getGroups`*num*`s90thPercentileLatency` | Shows the 90th percentile of group resolution time in milliseconds (*num* seconds granularity). *num* is specified by `hadoop.user.group.metrics.percentiles.intervals`. |
+| `getGroups`*num*`s95thPercentileLatency` | Shows the 95th percentile of group resolution time in milliseconds (*num* seconds granularity). *num* is specified by `hadoop.user.group.metrics.percentiles.intervals`. |
+| `getGroups`*num*`s99thPercentileLatency` | Shows the 99th percentile of group resolution time in milliseconds (*num* seconds granularity). *num* is specified by `hadoop.user.group.metrics.percentiles.intervals`. |
+
+metricssystem context
+=====================
+
+MetricsSystem
+-------------
+
+MetricsSystem shows the statistics for metrics snapshots and publishes. Each metrics record contains Hostname tag as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `NumActiveSources` | Current number of active metrics sources |
+| `NumAllSources` | Total number of metrics sources |
+| `NumActiveSinks` | Current number of active sinks |
+| `NumAllSinks` | Total number of sinks (BUT usually less than `NumActiveSinks`, see [HADOOP-9946](https://issues.apache.org/jira/browse/HADOOP-9946)) |
+| `SnapshotNumOps` | Total number of operations to snapshot statistics from a metrics source |
+| `SnapshotAvgTime` | Average time in milliseconds to snapshot statistics from a metrics source |
+| `PublishNumOps` | Total number of operations to publish statistics to a sink |
+| `PublishAvgTime` | Average time in milliseconds to publish statistics to a sink |
+| `DroppedPubAll` | Total number of dropped publishes |
+| `Sink_`*instance*`NumOps` | Total number of sink operations for the *instance* |
+| `Sink_`*instance*`AvgTime` | Average time in milliseconds of sink operations for the *instance* |
+| `Sink_`*instance*`Dropped` | Total number of dropped sink operations for the *instance* |
+| `Sink_`*instance*`Qsize` | Current queue length of sink operations (BUT always set to 0 because nothing to increment this metrics, see [HADOOP-9941](https://issues.apache.org/jira/browse/HADOOP-9941)) |
+
+default context
+===============
+
+StartupProgress
+---------------
+
+StartupProgress metrics shows the statistics of NameNode startup. Four metrics are exposed for each startup phase based on its name. The startup *phase*s are `LoadingFsImage`, `LoadingEdits`, `SavingCheckpoint`, and `SafeMode`. Each metrics record contains Hostname tag as additional information along with metrics.
+
+| Name | Description |
+|:---- |:---- |
+| `ElapsedTime` | Total elapsed time in milliseconds |
+| `PercentComplete` | Current rate completed in NameNode startup progress (The max value is not 100 but 1.0) |
+| *phase*`Count` | Total number of steps completed in the phase |
+| *phase*`ElapsedTime` | Total elapsed time in the phase in milliseconds |
+| *phase*`Total` | Total number of steps in the phase |
+| *phase*`PercentComplete` | Current rate completed in the phase (The max value is not 100 but 1.0) |
+
+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/NativeLibraries.md.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/NativeLibraries.md.vm b/hadoop-common-project/hadoop-common/src/site/markdown/NativeLibraries.md.vm
new file mode 100644
index 0000000..5a2c70c
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/NativeLibraries.md.vm
@@ -0,0 +1,145 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Native Libraries Guide
+======================
+
+* [Native Libraries Guide](#Native_Libraries_Guide)
+ * [Overview](#Overview)
+ * [Native Hadoop Library](#Native_Hadoop_Library)
+ * [Usage](#Usage)
+ * [Components](#Components)
+ * [Supported Platforms](#Supported_Platforms)
+ * [Download](#Download)
+ * [Build](#Build)
+ * [Runtime](#Runtime)
+ * [Check](#Check)
+ * [Native Shared Libraries](#Native_Shared_Libraries)
+
+Overview
+--------
+
+This guide describes the native hadoop library and includes a small discussion about native shared libraries.
+
+Note: Depending on your environment, the term "native libraries" could refer to all \*.so's you need to compile; and, the term "native compression" could refer to all \*.so's you need to compile that are specifically related to compression. Currently, however, this document only addresses the native hadoop library (`libhadoop.so`). The document for libhdfs library (`libhdfs.so`) is [here](../hadoop-hdfs/LibHdfs.html).
+
+Native Hadoop Library
+---------------------
+
+Hadoop has native implementations of certain components for performance reasons and for non-availability of Java implementations. These components are available in a single, dynamically-linked native library called the native hadoop library. On the \*nix platforms the library is named `libhadoop.so`.
+
+Usage
+-----
+
+It is fairly easy to use the native hadoop library:
+
+1. Review the components.
+2. Review the supported platforms.
+3. Either download a hadoop release, which will include a pre-built version of the native hadoop library, or build your own version of the native hadoop library. Whether you download or build, the name for the library is the same: libhadoop.so
+4. Install the compression codec development packages (\>zlib-1.2, \>gzip-1.2):
+ * If you download the library, install one or more development packages - whichever compression codecs you want to use with your deployment.
+ * If you build the library, it is mandatory to install both development packages.
+5. Check the runtime log files.
+
+Components
+----------
+
+The native hadoop library includes various components:
+
+* Compression Codecs (bzip2, lz4, snappy, zlib)
+* Native IO utilities for [HDFS Short-Circuit Local Reads](../hadoop-hdfs/ShortCircuitLocalReads.html) and [Centralized Cache Management in HDFS](../hadoop-hdfs/CentralizedCacheManagement.html)
+* CRC32 checksum implementation
+
+Supported Platforms
+-------------------
+
+The native hadoop library is supported on \*nix platforms only. The library does not to work with Cygwin or the Mac OS X platform.
+
+The native hadoop library is mainly used on the GNU/Linus platform and has been tested on these distributions:
+
+* RHEL4/Fedora
+* Ubuntu
+* Gentoo
+
+On all the above distributions a 32/64 bit native hadoop library will work with a respective 32/64 bit jvm.
+
+Download
+--------
+
+The pre-built 32-bit i386-Linux native hadoop library is available as part of the hadoop distribution and is located in the `lib/native` directory. You can download the hadoop distribution from Hadoop Common Releases.
+
+Be sure to install the zlib and/or gzip development packages - whichever compression codecs you want to use with your deployment.
+
+Build
+-----
+
+The native hadoop library is written in ANSI C and is built using the GNU autotools-chain (autoconf, autoheader, automake, autoscan, libtool). This means it should be straight-forward to build the library on any platform with a standards-compliant C compiler and the GNU autotools-chain (see the supported platforms).
+
+The packages you need to install on the target platform are:
+
+* C compiler (e.g. GNU C Compiler)
+* GNU Autools Chain: autoconf, automake, libtool
+* zlib-development package (stable version \>= 1.2.0)
+* openssl-development package(e.g. libssl-dev)
+
+Once you installed the prerequisite packages use the standard hadoop pom.xml file and pass along the native flag to build the native hadoop library:
+
+ $ mvn package -Pdist,native -DskipTests -Dtar
+
+You should see the newly-built library in:
+
+ $ hadoop-dist/target/hadoop-${project.version}/lib/native
+
+Please note the following:
+
+* It is mandatory to install both the zlib and gzip development packages on the target platform in order to build the native hadoop library; however, for deployment it is sufficient to install just one package if you wish to use only one codec.
+* It is necessary to have the correct 32/64 libraries for zlib, depending on the 32/64 bit jvm for the target platform, in order to build and deploy the native hadoop library.
+
+Runtime
+-------
+
+The bin/hadoop script ensures that the native hadoop library is on the library path via the system property: `-Djava.library.path=<path> `
+
+During runtime, check the hadoop log files for your MapReduce tasks.
+
+* If everything is all right, then: `DEBUG util.NativeCodeLoader - Trying to load the custom-built native-hadoop library...` `INFO util.NativeCodeLoader - Loaded the native-hadoop library`
+* If something goes wrong, then: `INFO util.NativeCodeLoader - Unable to load native-hadoop library for your platform... using builtin-java classes where applicable`
+
+Check
+-----
+
+NativeLibraryChecker is a tool to check whether native libraries are loaded correctly. You can launch NativeLibraryChecker as follows:
+
+ $ hadoop checknative -a
+ 14/12/06 01:30:45 WARN bzip2.Bzip2Factory: Failed to load/initialize native-bzip2 library system-native, will use pure-Java version
+ 14/12/06 01:30:45 INFO zlib.ZlibFactory: Successfully loaded & initialized native-zlib library
+ Native library checking:
+ hadoop: true /home/ozawa/hadoop/lib/native/libhadoop.so.1.0.0
+ zlib: true /lib/x86_64-linux-gnu/libz.so.1
+ snappy: true /usr/lib/libsnappy.so.1
+ lz4: true revision:99
+ bzip2: false
+
+Native Shared Libraries
+-----------------------
+
+You can load any native shared library using DistributedCache for distributing and symlinking the library files.
+
+This example shows you how to distribute a shared library, mylib.so, and load it from a MapReduce task.
+
+1. First copy the library to the HDFS: `bin/hadoop fs -copyFromLocal mylib.so.1 /libraries/mylib.so.1`
+2. The job launching program should contain the following: `DistributedCache.createSymlink(conf);` `DistributedCache.addCacheFile("hdfs://host:port/libraries/mylib.so. 1#mylib.so", conf);`
+3. The MapReduce task can contain: `System.loadLibrary("mylib.so");`
+
+Note: If you downloaded or built the native hadoop library, you don’t need to use DistibutedCache to make the library available to your MapReduce tasks.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/RackAwareness.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/RackAwareness.md b/hadoop-common-project/hadoop-common/src/site/markdown/RackAwareness.md
new file mode 100644
index 0000000..41fcb37
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/RackAwareness.md
@@ -0,0 +1,104 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+* [Rack Awareness](#Rack_Awareness)
+ * [python Example](#python_Example)
+ * [bash Example](#bash_Example)
+
+Rack Awareness
+==============
+
+Hadoop components are rack-aware. For example, HDFS block placement will use rack awareness for fault tolerance by placing one block replica on a different rack. This provides data availability in the event of a network switch failure or partition within the cluster.
+
+Hadoop master daemons obtain the rack id of the cluster slaves by invoking either an external script or java class as specified by configuration files. Using either the java class or external script for topology, output must adhere to the java **org.apache.hadoop.net.DNSToSwitchMapping** interface. The interface expects a one-to-one correspondence to be maintained and the topology information in the format of '/myrack/myhost', where '/' is the topology delimiter, 'myrack' is the rack identifier, and 'myhost' is the individual host. Assuming a single /24 subnet per rack, one could use the format of '/192.168.100.0/192.168.100.5' as a unique rack-host topology mapping.
+
+To use the java class for topology mapping, the class name is specified by the **topology.node.switch.mapping.impl** parameter in the configuration file. An example, NetworkTopology.java, is included with the hadoop distribution and can be customized by the Hadoop administrator. Using a Java class instead of an external script has a performance benefit in that Hadoop doesn't need to fork an external process when a new slave node registers itself.
+
+If implementing an external script, it will be specified with the **topology.script.file.name** parameter in the configuration files. Unlike the java class, the external topology script is not included with the Hadoop distribution and is provided by the administrator. Hadoop will send multiple IP addresses to ARGV when forking the topology script. The number of IP addresses sent to the topology script is controlled with **net.topology.script.number.args** and defaults to 100. If **net.topology.script.number.args** was changed to 1, a topology script would get forked for each IP submitted by DataNodes and/or NodeManagers.
+
+If **topology.script.file.name** or **topology.node.switch.mapping.impl** is not set, the rack id '/default-rack' is returned for any passed IP address. While this behavior appears desirable, it can cause issues with HDFS block replication as default behavior is to write one replicated block off rack and is unable to do so as there is only a single rack named '/default-rack'.
+
+An additional configuration setting is **mapreduce.jobtracker.taskcache.levels** which determines the number of levels (in the network topology) of caches MapReduce will use. So, for example, if it is the default value of 2, two levels of caches will be constructed - one for hosts (host -\> task mapping) and another for racks (rack -\> task mapping). Giving us our one-to-one mapping of '/myrack/myhost'.
+
+python Example
+--------------
+```python
+#!/usr/bin/python
+# this script makes assumptions about the physical environment.
+# 1) each rack is its own layer 3 network with a /24 subnet, which
+# could be typical where each rack has its own
+# switch with uplinks to a central core router.
+#
+# +-----------+
+# |core router|
+# +-----------+
+# / \
+# +-----------+ +-----------+
+# |rack switch| |rack switch|
+# +-----------+ +-----------+
+# | data node | | data node |
+# +-----------+ +-----------+
+# | data node | | data node |
+# +-----------+ +-----------+
+#
+# 2) topology script gets list of IP's as input, calculates network address, and prints '/network_address/ip'.
+
+import netaddr
+import sys
+sys.argv.pop(0) # discard name of topology script from argv list as we just want IP addresses
+
+netmask = '255.255.255.0' # set netmask to what's being used in your environment. The example uses a /24
+
+for ip in sys.argv: # loop over list of datanode IP's
+address = '{0}/{1}'.format(ip, netmask) # format address string so it looks like 'ip/netmask' to make netaddr work
+try:
+ network_address = netaddr.IPNetwork(address).network # calculate and print network address
+ print "/{0}".format(network_address)
+except:
+ print "/rack-unknown" # print catch-all value if unable to calculate network address
+```
+
+bash Example
+------------
+
+```bash
+#!/bin/bash
+# Here's a bash example to show just how simple these scripts can be
+# Assuming we have flat network with everything on a single switch, we can fake a rack topology.
+# This could occur in a lab environment where we have limited nodes,like 2-8 physical machines on a unmanaged switch.
+# This may also apply to multiple virtual machines running on the same physical hardware.
+# The number of machines isn't important, but that we are trying to fake a network topology when there isn't one.
+#
+# +----------+ +--------+
+# |jobtracker| |datanode|
+# +----------+ +--------+
+# \ /
+# +--------+ +--------+ +--------+
+# |datanode|--| switch |--|datanode|
+# +--------+ +--------+ +--------+
+# / \
+# +--------+ +--------+
+# |datanode| |namenode|
+# +--------+ +--------+
+#
+# With this network topology, we are treating each host as a rack. This is being done by taking the last octet
+# in the datanode's IP and prepending it with the word '/rack-'. The advantage for doing this is so HDFS
+# can create its 'off-rack' block copy.
+# 1) 'echo $@' will echo all ARGV values to xargs.
+# 2) 'xargs' will enforce that we print a single argv value per line
+# 3) 'awk' will split fields on dots and append the last field to the string '/rack-'. If awk
+# fails to split on four dots, it will still print '/rack-' last field value
+
+echo $@ | xargs -n 1 | awk -F '.' '{print "/rack-"$NF}'
+```
\ No newline at end of file
[3/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Posted by aw...@apache.org.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/ClusterSetup.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/ClusterSetup.md b/hadoop-common-project/hadoop-common/src/site/markdown/ClusterSetup.md
new file mode 100644
index 0000000..80c7d58
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/ClusterSetup.md
@@ -0,0 +1,339 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+* [Hadoop Cluster Setup](#Hadoop_Cluster_Setup)
+ * [Purpose](#Purpose)
+ * [Prerequisites](#Prerequisites)
+ * [Installation](#Installation)
+ * [Configuring Hadoop in Non-Secure Mode](#Configuring_Hadoop_in_Non-Secure_Mode)
+ * [Configuring Environment of Hadoop Daemons](#Configuring_Environment_of_Hadoop_Daemons)
+ * [Configuring the Hadoop Daemons](#Configuring_the_Hadoop_Daemons)
+ * [Monitoring Health of NodeManagers](#Monitoring_Health_of_NodeManagers)
+ * [Slaves File](#Slaves_File)
+ * [Hadoop Rack Awareness](#Hadoop_Rack_Awareness)
+ * [Logging](#Logging)
+ * [Operating the Hadoop Cluster](#Operating_the_Hadoop_Cluster)
+ * [Hadoop Startup](#Hadoop_Startup)
+ * [Hadoop Shutdown](#Hadoop_Shutdown)
+ * [Web Interfaces](#Web_Interfaces)
+
+Hadoop Cluster Setup
+====================
+
+Purpose
+-------
+
+This document describes how to install and configure Hadoop clusters ranging from a few nodes to extremely large clusters with thousands of nodes. To play with Hadoop, you may first want to install it on a single machine (see [Single Node Setup](./SingleCluster.html)).
+
+This document does not cover advanced topics such as [Security](./SecureMode.html) or High Availability.
+
+Prerequisites
+-------------
+
+* Install Java. See the [Hadoop Wiki](http://wiki.apache.org/hadoop/HadoopJavaVersions) for known good versions.
+* Download a stable version of Hadoop from Apache mirrors.
+
+Installation
+------------
+
+Installing a Hadoop cluster typically involves unpacking the software on all the machines in the cluster or installing it via a packaging system as appropriate for your operating system. It is important to divide up the hardware into functions.
+
+Typically one machine in the cluster is designated as the NameNode and another machine the as ResourceManager, exclusively. These are the masters. Other services (such as Web App Proxy Server and MapReduce Job History server) are usually run either on dedicated hardware or on shared infrastrucutre, depending upon the load.
+
+The rest of the machines in the cluster act as both DataNode and NodeManager. These are the slaves.
+
+Configuring Hadoop in Non-Secure Mode
+-------------------------------------
+
+Hadoop's Java configuration is driven by two types of important configuration files:
+
+* Read-only default configuration - `core-default.xml`, `hdfs-default.xml`, `yarn-default.xml` and `mapred-default.xml`.
+
+* Site-specific configuration - `etc/hadoop/core-site.xml`, `etc/hadoop/hdfs-site.xml`, `etc/hadoop/yarn-site.xml` and `etc/hadoop/mapred-site.xml`.
+
+Additionally, you can control the Hadoop scripts found in the bin/ directory of the distribution, by setting site-specific values via the `etc/hadoop/hadoop-env.sh` and `etc/hadoop/yarn-env.sh`.
+
+To configure the Hadoop cluster you will need to configure the `environment` in which the Hadoop daemons execute as well as the `configuration parameters` for the Hadoop daemons.
+
+HDFS daemons are NameNode, SecondaryNameNode, and DataNode. YARN damones are ResourceManager, NodeManager, and WebAppProxy. If MapReduce is to be used, then the MapReduce Job History Server will also be running. For large installations, these are generally running on separate hosts.
+
+### Configuring Environment of Hadoop Daemons
+
+Administrators should use the `etc/hadoop/hadoop-env.sh` and optionally the `etc/hadoop/mapred-env.sh` and `etc/hadoop/yarn-env.sh` scripts to do site-specific customization of the Hadoop daemons' process environment.
+
+At the very least, you must specify the `JAVA_HOME` so that it is correctly defined on each remote node.
+
+Administrators can configure individual daemons using the configuration options shown below in the table:
+
+| Daemon | Environment Variable |
+|:---- |:---- |
+| NameNode | HADOOP\_NAMENODE\_OPTS |
+| DataNode | HADOOP\_DATANODE\_OPTS |
+| Secondary NameNode | HADOOP\_SECONDARYNAMENODE\_OPTS |
+| ResourceManager | YARN\_RESOURCEMANAGER\_OPTS |
+| NodeManager | YARN\_NODEMANAGER\_OPTS |
+| WebAppProxy | YARN\_PROXYSERVER\_OPTS |
+| Map Reduce Job History Server | HADOOP\_JOB\_HISTORYSERVER\_OPTS |
+
+For example, To configure Namenode to use parallelGC, the following statement should be added in hadoop-env.sh :
+
+ export HADOOP_NAMENODE_OPTS="-XX:+UseParallelGC"
+
+See `etc/hadoop/hadoop-env.sh` for other examples.
+
+Other useful configuration parameters that you can customize include:
+
+* `HADOOP_PID_DIR` - The directory where the daemons' process id files are stored.
+* `HADOOP_LOG_DIR` - The directory where the daemons' log files are stored. Log files are automatically created if they don't exist.
+* `HADOOP_HEAPSIZE_MAX` - The maximum amount of memory to use for the Java heapsize. Units supported by the JVM are also supported here. If no unit is present, it will be assumed the number is in megabytes. By default, Hadoop will let the JVM determine how much to use. This value can be overriden on a per-daemon basis using the appropriate `_OPTS` variable listed above. For example, setting `HADOOP_HEAPSIZE_MAX=1g` and `HADOOP_NAMENODE_OPTS="-Xmx5g"` will configure the NameNode with 5GB heap.
+
+In most cases, you should specify the `HADOOP_PID_DIR` and `HADOOP_LOG_DIR` directories such that they can only be written to by the users that are going to run the hadoop daemons. Otherwise there is the potential for a symlink attack.
+
+It is also traditional to configure `HADOOP_PREFIX` in the system-wide shell environment configuration. For example, a simple script inside `/etc/profile.d`:
+
+ HADOOP_PREFIX=/path/to/hadoop
+ export HADOOP_PREFIX
+
+| Daemon | Environment Variable |
+|:---- |:---- |
+| ResourceManager | YARN\_RESOURCEMANAGER\_HEAPSIZE |
+| NodeManager | YARN\_NODEMANAGER\_HEAPSIZE |
+| WebAppProxy | YARN\_PROXYSERVER\_HEAPSIZE |
+| Map Reduce Job History Server | HADOOP\_JOB\_HISTORYSERVER\_HEAPSIZE |
+
+### Configuring the Hadoop Daemons
+
+This section deals with important parameters to be specified in the given configuration files:
+
+* `etc/hadoop/core-site.xml`
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `fs.defaultFS` | NameNode URI | hdfs://host:port/ |
+| `io.file.buffer.size` | 131072 | Size of read/write buffer used in SequenceFiles. |
+
+* `etc/hadoop/hdfs-site.xml`
+
+ * Configurations for NameNode:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `dfs.namenode.name.dir` | Path on the local filesystem where the NameNode stores the namespace and transactions logs persistently. | If this is a comma-delimited list of directories then the name table is replicated in all of the directories, for redundancy. |
+| `dfs.namenode.hosts` / `dfs.namenode.hosts.exclude` | List of permitted/excluded DataNodes. | If necessary, use these files to control the list of allowable datanodes. |
+| `dfs.blocksize` | 268435456 | HDFS blocksize of 256MB for large file-systems. |
+| `dfs.namenode.handler.count` | 100 | More NameNode server threads to handle RPCs from large number of DataNodes. |
+
+ * Configurations for DataNode:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `dfs.datanode.data.dir` | Comma separated list of paths on the local filesystem of a `DataNode` where it should store its blocks. | If this is a comma-delimited list of directories, then data will be stored in all named directories, typically on different devices. |
+
+* `etc/hadoop/yarn-site.xml`
+
+ * Configurations for ResourceManager and NodeManager:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.acl.enable` | `true` / `false` | Enable ACLs? Defaults to *false*. |
+| `yarn.admin.acl` | Admin ACL | ACL to set admins on the cluster. ACLs are of for *comma-separated-usersspacecomma-separated-groups*. Defaults to special value of **\*** which means *anyone*. Special value of just *space* means no one has access. |
+| `yarn.log-aggregation-enable` | *false* | Configuration to enable or disable log aggregation |
+
+ * Configurations for ResourceManager:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.resourcemanager.address` | `ResourceManager` host:port for clients to submit jobs. | *host:port* If set, overrides the hostname set in `yarn.resourcemanager.hostname`. |
+| `yarn.resourcemanager.scheduler.address` | `ResourceManager` host:port for ApplicationMasters to talk to Scheduler to obtain resources. | *host:port* If set, overrides the hostname set in `yarn.resourcemanager.hostname`. |
+| `yarn.resourcemanager.resource-tracker.address` | `ResourceManager` host:port for NodeManagers. | *host:port* If set, overrides the hostname set in `yarn.resourcemanager.hostname`. |
+| `yarn.resourcemanager.admin.address` | `ResourceManager` host:port for administrative commands. | *host:port* If set, overrides the hostname set in `yarn.resourcemanager.hostname`. |
+| `yarn.resourcemanager.webapp.address` | `ResourceManager` web-ui host:port. | *host:port* If set, overrides the hostname set in `yarn.resourcemanager.hostname`. |
+| `yarn.resourcemanager.hostname` | `ResourceManager` host. | *host* Single hostname that can be set in place of setting all `yarn.resourcemanager*address` resources. Results in default ports for ResourceManager components. |
+| `yarn.resourcemanager.scheduler.class` | `ResourceManager` Scheduler class. | `CapacityScheduler` (recommended), `FairScheduler` (also recommended), or `FifoScheduler` |
+| `yarn.scheduler.minimum-allocation-mb` | Minimum limit of memory to allocate to each container request at the `Resource Manager`. | In MBs |
+| `yarn.scheduler.maximum-allocation-mb` | Maximum limit of memory to allocate to each container request at the `Resource Manager`. | In MBs |
+| `yarn.resourcemanager.nodes.include-path` / `yarn.resourcemanager.nodes.exclude-path` | List of permitted/excluded NodeManagers. | If necessary, use these files to control the list of allowable NodeManagers. |
+
+ * Configurations for NodeManager:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.nodemanager.resource.memory-mb` | Resource i.e. available physical memory, in MB, for given `NodeManager` | Defines total available resources on the `NodeManager` to be made available to running containers |
+| `yarn.nodemanager.vmem-pmem-ratio` | Maximum ratio by which virtual memory usage of tasks may exceed physical memory | The virtual memory usage of each task may exceed its physical memory limit by this ratio. The total amount of virtual memory used by tasks on the NodeManager may exceed its physical memory usage by this ratio. |
+| `yarn.nodemanager.local-dirs` | Comma-separated list of paths on the local filesystem where intermediate data is written. | Multiple paths help spread disk i/o. |
+| `yarn.nodemanager.log-dirs` | Comma-separated list of paths on the local filesystem where logs are written. | Multiple paths help spread disk i/o. |
+| `yarn.nodemanager.log.retain-seconds` | *10800* | Default time (in seconds) to retain log files on the NodeManager Only applicable if log-aggregation is disabled. |
+| `yarn.nodemanager.remote-app-log-dir` | */logs* | HDFS directory where the application logs are moved on application completion. Need to set appropriate permissions. Only applicable if log-aggregation is enabled. |
+| `yarn.nodemanager.remote-app-log-dir-suffix` | *logs* | Suffix appended to the remote log dir. Logs will be aggregated to ${yarn.nodemanager.remote-app-log-dir}/${user}/${thisParam} Only applicable if log-aggregation is enabled. |
+| `yarn.nodemanager.aux-services` | mapreduce\_shuffle | Shuffle service that needs to be set for Map Reduce applications. |
+
+ * Configurations for History Server (Needs to be moved elsewhere):
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.log-aggregation.retain-seconds` | *-1* | How long to keep aggregation logs before deleting them. -1 disables. Be careful, set this too small and you will spam the name node. |
+| `yarn.log-aggregation.retain-check-interval-seconds` | *-1* | Time between checks for aggregated log retention. If set to 0 or a negative value then the value is computed as one-tenth of the aggregated log retention time. Be careful, set this too small and you will spam the name node. |
+
+* `etc/hadoop/mapred-site.xml`
+
+ * Configurations for MapReduce Applications:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `mapreduce.framework.name` | yarn | Execution framework set to Hadoop YARN. |
+| `mapreduce.map.memory.mb` | 1536 | Larger resource limit for maps. |
+| `mapreduce.map.java.opts` | -Xmx1024M | Larger heap-size for child jvms of maps. |
+| `mapreduce.reduce.memory.mb` | 3072 | Larger resource limit for reduces. |
+| `mapreduce.reduce.java.opts` | -Xmx2560M | Larger heap-size for child jvms of reduces. |
+| `mapreduce.task.io.sort.mb` | 512 | Higher memory-limit while sorting data for efficiency. |
+| `mapreduce.task.io.sort.factor` | 100 | More streams merged at once while sorting files. |
+| `mapreduce.reduce.shuffle.parallelcopies` | 50 | Higher number of parallel copies run by reduces to fetch outputs from very large number of maps. |
+
+ * Configurations for MapReduce JobHistory Server:
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `mapreduce.jobhistory.address` | MapReduce JobHistory Server *host:port* | Default port is 10020. |
+| `mapreduce.jobhistory.webapp.address` | MapReduce JobHistory Server Web UI *host:port* | Default port is 19888. |
+| `mapreduce.jobhistory.intermediate-done-dir` | /mr-history/tmp | Directory where history files are written by MapReduce jobs. |
+| `mapreduce.jobhistory.done-dir` | /mr-history/done | Directory where history files are managed by the MR JobHistory Server. |
+
+Monitoring Health of NodeManagers
+---------------------------------
+
+Hadoop provides a mechanism by which administrators can configure the NodeManager to run an administrator supplied script periodically to determine if a node is healthy or not.
+
+Administrators can determine if the node is in a healthy state by performing any checks of their choice in the script. If the script detects the node to be in an unhealthy state, it must print a line to standard output beginning with the string ERROR. The NodeManager spawns the script periodically and checks its output. If the script's output contains the string ERROR, as described above, the node's status is reported as `unhealthy` and the node is black-listed by the ResourceManager. No further tasks will be assigned to this node. However, the NodeManager continues to run the script, so that if the node becomes healthy again, it will be removed from the blacklisted nodes on the ResourceManager automatically. The node's health along with the output of the script, if it is unhealthy, is available to the administrator in the ResourceManager web interface. The time since the node was healthy is also displayed on the web interface.
+
+The following parameters can be used to control the node health monitoring script in `etc/hadoop/yarn-site.xml`.
+
+| Parameter | Value | Notes |
+|:---- |:---- |:---- |
+| `yarn.nodemanager.health-checker.script.path` | Node health script | Script to check for node's health status. |
+| `yarn.nodemanager.health-checker.script.opts` | Node health script options | Options for script to check for node's health status. |
+| `yarn.nodemanager.health-checker.script.interval-ms` | Node health script interval | Time interval for running health script. |
+| `yarn.nodemanager.health-checker.script.timeout-ms` | Node health script timeout interval | Timeout for health script execution. |
+
+The health checker script is not supposed to give ERROR if only some of the local disks become bad. NodeManager has the ability to periodically check the health of the local disks (specifically checks nodemanager-local-dirs and nodemanager-log-dirs) and after reaching the threshold of number of bad directories based on the value set for the config property yarn.nodemanager.disk-health-checker.min-healthy-disks, the whole node is marked unhealthy and this info is sent to resource manager also. The boot disk is either raided or a failure in the boot disk is identified by the health checker script.
+
+Slaves File
+-----------
+
+List all slave hostnames or IP addresses in your `etc/hadoop/slaves` file, one per line. Helper scripts (described below) will use the `etc/hadoop/slaves` file to run commands on many hosts at once. It is not used for any of the Java-based Hadoop configuration. In order to use this functionality, ssh trusts (via either passphraseless ssh or some other means, such as Kerberos) must be established for the accounts used to run Hadoop.
+
+Hadoop Rack Awareness
+---------------------
+
+Many Hadoop components are rack-aware and take advantage of the network topology for performance and safety. Hadoop daemons obtain the rack information of the slaves in the cluster by invoking an administrator configured module. See the [Rack Awareness](./RackAwareness.html) documentation for more specific information.
+
+It is highly recommended configuring rack awareness prior to starting HDFS.
+
+Logging
+-------
+
+Hadoop uses the [Apache log4j](http://logging.apache.org/log4j/2.x/) via the Apache Commons Logging framework for logging. Edit the `etc/hadoop/log4j.properties` file to customize the Hadoop daemons' logging configuration (log-formats and so on).
+
+Operating the Hadoop Cluster
+----------------------------
+
+Once all the necessary configuration is complete, distribute the files to the `HADOOP_CONF_DIR` directory on all the machines. This should be the same directory on all machines.
+
+In general, it is recommended that HDFS and YARN run as separate users. In the majority of installations, HDFS processes execute as 'hdfs'. YARN is typically using the 'yarn' account.
+
+### Hadoop Startup
+
+To start a Hadoop cluster you will need to start both the HDFS and YARN cluster.
+
+The first time you bring up HDFS, it must be formatted. Format a new distributed filesystem as *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/bin/hdfs namenode -format <cluster_name>
+
+Start the HDFS NameNode with the following command on the designated node as *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon start namenode
+
+Start a HDFS DataNode with the following command on each designated node as *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon start datanode
+
+If `etc/hadoop/slaves` and ssh trusted access is configured (see [Single Node Setup](./SingleCluster.html)), all of the HDFS processes can be started with a utility script. As *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/sbin/start-dfs.sh
+
+Start the YARN with the following command, run on the designated ResourceManager as *yarn*:
+
+ [yarn]$ $HADOOP_PREFIX/bin/yarn --daemon start resourcemanager
+
+Run a script to start a NodeManager on each designated host as *yarn*:
+
+ [yarn]$ $HADOOP_PREFIX/bin/yarn --daemon start nodemanager
+
+Start a standalone WebAppProxy server. Run on the WebAppProxy server as *yarn*. If multiple servers are used with load balancing it should be run on each of them:
+
+ [yarn]$ $HADOOP_PREFIX/bin/yarn --daemon start proxyserver
+
+If `etc/hadoop/slaves` and ssh trusted access is configured (see [Single Node Setup](./SingleCluster.html)), all of the YARN processes can be started with a utility script. As *yarn*:
+
+ [yarn]$ $HADOOP_PREFIX/sbin/start-yarn.sh
+
+Start the MapReduce JobHistory Server with the following command, run on the designated server as *mapred*:
+
+ [mapred]$ $HADOOP_PREFIX/bin/mapred --daemon start historyserver
+
+### Hadoop Shutdown
+
+Stop the NameNode with the following command, run on the designated NameNode as *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon stop namenode
+
+Run a script to stop a DataNode as *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon stop datanode
+
+If `etc/hadoop/slaves` and ssh trusted access is configured (see [Single Node Setup](./SingleCluster.html)), all of the HDFS processes may be stopped with a utility script. As *hdfs*:
+
+ [hdfs]$ $HADOOP_PREFIX/sbin/stop-dfs.sh
+
+Stop the ResourceManager with the following command, run on the designated ResourceManager as *yarn*:
+
+ [yarn]$ $HADOOP_PREFIX/bin/yarn --daemon stop resourcemanager
+
+Run a script to stop a NodeManager on a slave as *yarn*:
+
+ [yarn]$ $HADOOP_PREFIX/bin/yarn --daemon stop nodemanager
+
+If `etc/hadoop/slaves` and ssh trusted access is configured (see [Single Node Setup](./SingleCluster.html)), all of the YARN processes can be stopped with a utility script. As *yarn*:
+
+ [yarn]$ $HADOOP_PREFIX/sbin/stop-yarn.sh
+
+Stop the WebAppProxy server. Run on the WebAppProxy server as *yarn*. If multiple servers are used with load balancing it should be run on each of them:
+
+ [yarn]$ $HADOOP_PREFIX/bin/yarn stop proxyserver
+
+Stop the MapReduce JobHistory Server with the following command, run on the designated server as *mapred*:
+
+ [mapred]$ $HADOOP_PREFIX/bin/mapred --daemon stop historyserver
+
+Web Interfaces
+--------------
+
+Once the Hadoop cluster is up and running check the web-ui of the components as described below:
+
+| Daemon | Web Interface | Notes |
+|:---- |:---- |:---- |
+| NameNode | http://nn_host:port/ | Default HTTP port is 50070. |
+| ResourceManager | http://rm_host:port/ | Default HTTP port is 8088. |
+| MapReduce JobHistory Server | http://jhs_host:port/ | Default HTTP port is 19888. |
+
+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/CommandsManual.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/CommandsManual.md b/hadoop-common-project/hadoop-common/src/site/markdown/CommandsManual.md
new file mode 100644
index 0000000..b9c92c4
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/CommandsManual.md
@@ -0,0 +1,227 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+* [Hadoop Commands Guide](#Hadoop_Commands_Guide)
+ * [Overview](#Overview)
+ * [Shell Options](#Shell_Options)
+ * [Generic Options](#Generic_Options)
+* [Hadoop Common Commands](#Hadoop_Common_Commands)
+ * [User Commands](#User_Commands)
+ * [archive](#archive)
+ * [checknative](#checknative)
+ * [classpath](#classpath)
+ * [credential](#credential)
+ * [distch](#distch)
+ * [distcp](#distcp)
+ * [fs](#fs)
+ * [jar](#jar)
+ * [jnipath](#jnipath)
+ * [key](#key)
+ * [trace](#trace)
+ * [version](#version)
+ * [CLASSNAME](#CLASSNAME)
+ * [Administration Commands](#Administration_Commands)
+ * [daemonlog](#daemonlog)
+ * [Files](#Files)
+ * [etc/hadoop/hadoop-env.sh](#etchadoophadoop-env.sh)
+ * [etc/hadoop/hadoop-user-functions.sh](#etchadoophadoop-user-functions.sh)
+ * [~/.hadooprc](#a.hadooprc)
+
+Hadoop Commands Guide
+=====================
+
+Overview
+--------
+
+All of the Hadoop commands and subprojects follow the same basic structure:
+
+Usage: `shellcommand [SHELL_OPTIONS] [COMMAND] [GENERIC_OPTIONS] [COMMAND_OPTIONS]`
+
+| FIELD | Description |
+|:---- |:---- |
+| shellcommand | The command of the project being invoked. For example, Hadoop common uses `hadoop`, HDFS uses `hdfs`, and YARN uses `yarn`. |
+| SHELL\_OPTIONS | Options that the shell processes prior to executing Java. |
+| COMMAND | Action to perform. |
+| GENERIC\_OPTIONS | The common set of options supported by multiple commands. |
+| COMMAND\_OPTIONS | Various commands with their options are described in this documention for the Hadoop common sub-project. HDFS and YARN are covered in other documents. |
+
+### Shell Options
+
+All of the shell commands will accept a common set of options. For some commands, these options are ignored. For example, passing `---hostnames` on a command that only executes on a single host will be ignored.
+
+| SHELL\_OPTION | Description |
+|:---- |:---- |
+| `--buildpaths` | Enables developer versions of jars. |
+| `--config confdir` | Overwrites the default Configuration directory. Default is `$HADOOP_PREFIX/conf`. |
+| `--daemon mode` | If the command supports daemonization (e.g., `hdfs namenode`), execute in the appropriate mode. Supported modes are `start` to start the process in daemon mode, `stop` to stop the process, and `status` to determine the active status of the process. `status` will return an [LSB-compliant](http://refspecs.linuxbase.org/LSB_3.0.0/LSB-generic/LSB-generic/iniscrptact.html) result code. If no option is provided, commands that support daemonization will run in the foreground. |
+| `--debug` | Enables shell level configuration debugging information |
+| `--help` | Shell script usage information. |
+| `--hostnames` | A space delimited list of hostnames where to execute a multi-host subcommand. By default, the content of the `slaves` file is used. |
+| `--hosts` | A file that contains a list of hostnames where to execute a multi-host subcommand. By default, the content of the `slaves` file is used. |
+| `--loglevel loglevel` | Overrides the log level. Valid log levels are FATAL, ERROR, WARN, INFO, DEBUG, and TRACE. Default is INFO. |
+
+### Generic Options
+
+Many subcommands honor a common set of configuration options to alter their behavior:
+
+| GENERIC\_OPTION | Description |
+|:---- |:---- |
+| `-archives <comma separated list of archives> ` | Specify comma separated archives to be unarchived on the compute machines. Applies only to job. |
+| `-conf <configuration file> ` | Specify an application configuration file. |
+| `-D <property>=<value> ` | Use value for given property. |
+| `-files <comma separated list of files> ` | Specify comma separated files to be copied to the map reduce cluster. Applies only to job. |
+| `-jt <local> or <resourcemanager:port>` | Specify a ResourceManager. Applies only to job. |
+| `-libjars <comma seperated list of jars> ` | Specify comma separated jar files to include in the classpath. Applies only to job. |
+
+Hadoop Common Commands
+======================
+
+All of these commands are executed from the `hadoop` shell command. They have been broken up into [User Commands](#User_Commands) and [Admininistration Commands](#Admininistration_Commands).
+
+User Commands
+-------------
+
+Commands useful for users of a hadoop cluster.
+
+### `archive`
+
+Creates a hadoop archive. More information can be found at [Hadoop Archives Guide](../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/HadoopArchives.html).
+
+### `checknative`
+
+Usage: `hadoop checknative [-a] [-h] `
+
+| COMMAND\_OPTION | Description |
+|:---- |:---- |
+| `-a` | Check all libraries are available. |
+| `-h` | print help |
+
+This command checks the availability of the Hadoop native code. See [\#NativeLibraries.html](#NativeLibraries.html) for more information. By default, this command only checks the availability of libhadoop.
+
+### `classpath`
+
+Usage: `hadoop classpath [--glob |--jar <path> |-h |--help]`
+
+| COMMAND\_OPTION | Description |
+|:---- |:---- |
+| `--glob` | expand wildcards |
+| `--jar` *path* | write classpath as manifest in jar named *path* |
+| `-h`, `--help` | print help |
+
+Prints the class path needed to get the Hadoop jar and the required libraries. If called without arguments, then prints the classpath set up by the command scripts, which is likely to contain wildcards in the classpath entries. Additional options print the classpath after wildcard expansion or write the classpath into the manifest of a jar file. The latter is useful in environments where wildcards cannot be used and the expanded classpath exceeds the maximum supported command line length.
+
+### `credential`
+
+Usage: `hadoop credential <subcommand> [options]`
+
+| COMMAND\_OPTION | Description |
+|:---- |:---- |
+| create *alias* [-v *value*][-provider *provider-path*] | Prompts the user for a credential to be stored as the given alias when a value is not provided via `-v`. The *hadoop.security.credential.provider.path* within the core-site.xml file will be used unless a `-provider` is indicated. |
+| delete *alias* [-i][-provider *provider-path*] | Deletes the credential with the provided alias and optionally warns the user when `--interactive` is used. The *hadoop.security.credential.provider.path* within the core-site.xml file will be used unless a `-provider` is indicated. |
+| list [-provider *provider-path*] | Lists all of the credential aliases The *hadoop.security.credential.provider.path* within the core-site.xml file will be used unless a `-provider` is indicated. |
+
+Command to manage credentials, passwords and secrets within credential providers.
+
+The CredentialProvider API in Hadoop allows for the separation of applications and how they store their required passwords/secrets. In order to indicate a particular provider type and location, the user must provide the *hadoop.security.credential.provider.path* configuration element in core-site.xml or use the command line option `-provider` on each of the following commands. This provider path is a comma-separated list of URLs that indicates the type and location of a list of providers that should be consulted. For example, the following path: `user:///,jceks://file/tmp/test.jceks,jceks://hdfs@nn1.example.com/my/path/test.jceks`
+
+indicates that the current user's credentials file should be consulted through the User Provider, that the local file located at `/tmp/test.jceks` is a Java Keystore Provider and that the file located within HDFS at `nn1.example.com/my/path/test.jceks` is also a store for a Java Keystore Provider.
+
+When utilizing the credential command it will often be for provisioning a password or secret to a particular credential store provider. In order to explicitly indicate which provider store to use the `-provider` option should be used. Otherwise, given a path of multiple providers, the first non-transient provider will be used. This may or may not be the one that you intended.
+
+Example: `-provider jceks://file/tmp/test.jceks`
+
+### `distch`
+
+Usage: `hadoop distch [-f urilist_url] [-i] [-log logdir] path:owner:group:permissions`
+
+| COMMAND\_OPTION | Description |
+|:---- |:---- |
+| `-f` | List of objects to change |
+| `-i` | Ignore failures |
+| `-log` | Directory to log output |
+
+Change the ownership and permissions on many files at once.
+
+### `distcp`
+
+Copy file or directories recursively. More information can be found at [Hadoop DistCp Guide](../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/DistCp.html).
+
+### `fs`
+
+This command is documented in the [File System Shell Guide](./FileSystemShell.html). It is a synonym for `hdfs dfs` when HDFS is in use.
+
+### `jar`
+
+Usage: `hadoop jar <jar> [mainClass] args...`
+
+Runs a jar file.
+
+Use [`yarn jar`](../../hadoop-yarn/hadoop-yarn-site/YarnCommands.html#jar) to launch YARN applications instead.
+
+### `jnipath`
+
+Usage: `hadoop jnipath`
+
+Print the computed java.library.path.
+
+### `key`
+
+Manage keys via the KeyProvider.
+
+### `trace`
+
+View and modify Hadoop tracing settings. See the [Tracing Guide](./Tracing.html).
+
+### `version`
+
+Usage: `hadoop version`
+
+Prints the version.
+
+### `CLASSNAME`
+
+Usage: `hadoop CLASSNAME`
+
+Runs the class named `CLASSNAME`. The class must be part of a package.
+
+Administration Commands
+-----------------------
+
+Commands useful for administrators of a hadoop cluster.
+
+### `daemonlog`
+
+Usage: `hadoop daemonlog -getlevel <host:port> <name> ` Usage: `hadoop daemonlog -setlevel <host:port> <name> <level> `
+
+| COMMAND\_OPTION | Description |
+|:---- |:---- |
+| `-getlevel` *host:port* *name* | Prints the log level of the daemon running at *host:port*. This command internally connects to http://host:port/logLevel?log=name |
+| `-setlevel` *host:port* *name* *level* | Sets the log level of the daemon running at *host:port*. This command internally connects to http://host:port/logLevel?log=name |
+
+Get/Set the log level for each daemon.
+
+Files
+-----
+
+### **etc/hadoop/hadoop-env.sh**
+
+This file stores the global settings used by all Hadoop shell commands.
+
+### **etc/hadoop/hadoop-user-functions.sh**
+
+This file allows for advanced users to override some shell functionality.
+
+### **~/.hadooprc**
+
+This stores the personal environment for an individual user. It is processed after the hadoop-env.sh and hadoop-user-functions.sh files and can contain the same settings.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/Compatibility.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/Compatibility.md b/hadoop-common-project/hadoop-common/src/site/markdown/Compatibility.md
new file mode 100644
index 0000000..c058021
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/Compatibility.md
@@ -0,0 +1,313 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Apache Hadoop Compatibility
+===========================
+
+* [Apache Hadoop Compatibility](#Apache_Hadoop_Compatibility)
+ * [Purpose](#Purpose)
+ * [Compatibility types](#Compatibility_types)
+ * [Java API](#Java_API)
+ * [Use Cases](#Use_Cases)
+ * [Policy](#Policy)
+ * [Semantic compatibility](#Semantic_compatibility)
+ * [Policy](#Policy)
+ * [Wire compatibility](#Wire_compatibility)
+ * [Use Cases](#Use_Cases)
+ * [Policy](#Policy)
+ * [Java Binary compatibility for end-user applications i.e. Apache Hadoop ABI](#Java_Binary_compatibility_for_end-user_applications_i.e._Apache_Hadoop_ABI)
+ * [Use cases](#Use_cases)
+ * [Policy](#Policy)
+ * [REST APIs](#REST_APIs)
+ * [Policy](#Policy)
+ * [Metrics/JMX](#MetricsJMX)
+ * [Policy](#Policy)
+ * [File formats & Metadata](#File_formats__Metadata)
+ * [User-level file formats](#User-level_file_formats)
+ * [Policy](#Policy)
+ * [System-internal file formats](#System-internal_file_formats)
+ * [MapReduce](#MapReduce)
+ * [Policy](#Policy)
+ * [HDFS Metadata](#HDFS_Metadata)
+ * [Policy](#Policy)
+ * [Command Line Interface (CLI)](#Command_Line_Interface_CLI)
+ * [Policy](#Policy)
+ * [Web UI](#Web_UI)
+ * [Policy](#Policy)
+ * [Hadoop Configuration Files](#Hadoop_Configuration_Files)
+ * [Policy](#Policy)
+ * [Directory Structure](#Directory_Structure)
+ * [Policy](#Policy)
+ * [Java Classpath](#Java_Classpath)
+ * [Policy](#Policy)
+ * [Environment variables](#Environment_variables)
+ * [Policy](#Policy)
+ * [Build artifacts](#Build_artifacts)
+ * [Policy](#Policy)
+ * [Hardware/Software Requirements](#HardwareSoftware_Requirements)
+ * [Policies](#Policies)
+ * [References](#References)
+
+Purpose
+-------
+
+This document captures the compatibility goals of the Apache Hadoop project. The different types of compatibility between Hadoop releases that affects Hadoop developers, downstream projects, and end-users are enumerated. For each type of compatibility we:
+
+* describe the impact on downstream projects or end-users
+* where applicable, call out the policy adopted by the Hadoop developers when incompatible changes are permitted.
+
+Compatibility types
+-------------------
+
+### Java API
+
+Hadoop interfaces and classes are annotated to describe the intended audience and stability in order to maintain compatibility with previous releases. See [Hadoop Interface Classification](./InterfaceClassification.html) for details.
+
+* InterfaceAudience: captures the intended audience, possible values are Public (for end users and external projects), LimitedPrivate (for other Hadoop components, and closely related projects like YARN, MapReduce, HBase etc.), and Private (for intra component use).
+* InterfaceStability: describes what types of interface changes are permitted. Possible values are Stable, Evolving, Unstable, and Deprecated.
+
+#### Use Cases
+
+* Public-Stable API compatibility is required to ensure end-user programs and downstream projects continue to work without modification.
+* LimitedPrivate-Stable API compatibility is required to allow upgrade of individual components across minor releases.
+* Private-Stable API compatibility is required for rolling upgrades.
+
+#### Policy
+
+* Public-Stable APIs must be deprecated for at least one major release prior to their removal in a major release.
+* LimitedPrivate-Stable APIs can change across major releases, but not within a major release.
+* Private-Stable APIs can change across major releases, but not within a major release.
+* Classes not annotated are implicitly "Private". Class members not annotated inherit the annotations of the enclosing class.
+* Note: APIs generated from the proto files need to be compatible for rolling-upgrades. See the section on wire-compatibility for more details. The compatibility policies for APIs and wire-communication need to go hand-in-hand to address this.
+
+### Semantic compatibility
+
+Apache Hadoop strives to ensure that the behavior of APIs remains consistent over versions, though changes for correctness may result in changes in behavior. Tests and javadocs specify the API's behavior. The community is in the process of specifying some APIs more rigorously, and enhancing test suites to verify compliance with the specification, effectively creating a formal specification for the subset of behaviors that can be easily tested.
+
+#### Policy
+
+The behavior of API may be changed to fix incorrect behavior, such a change to be accompanied by updating existing buggy tests or adding tests in cases there were none prior to the change.
+
+### Wire compatibility
+
+Wire compatibility concerns data being transmitted over the wire between Hadoop processes. Hadoop uses Protocol Buffers for most RPC communication. Preserving compatibility requires prohibiting modification as described below. Non-RPC communication should be considered as well, for example using HTTP to transfer an HDFS image as part of snapshotting or transferring MapTask output. The potential communications can be categorized as follows:
+
+* Client-Server: communication between Hadoop clients and servers (e.g., the HDFS client to NameNode protocol, or the YARN client to ResourceManager protocol).
+* Client-Server (Admin): It is worth distinguishing a subset of the Client-Server protocols used solely by administrative commands (e.g., the HAAdmin protocol) as these protocols only impact administrators who can tolerate changes that end users (which use general Client-Server protocols) can not.
+* Server-Server: communication between servers (e.g., the protocol between the DataNode and NameNode, or NodeManager and ResourceManager)
+
+#### Use Cases
+
+* Client-Server compatibility is required to allow users to continue using the old clients even after upgrading the server (cluster) to a later version (or vice versa). For example, a Hadoop 2.1.0 client talking to a Hadoop 2.3.0 cluster.
+* Client-Server compatibility is also required to allow users to upgrade the client before upgrading the server (cluster). For example, a Hadoop 2.4.0 client talking to a Hadoop 2.3.0 cluster. This allows deployment of client-side bug fixes ahead of full cluster upgrades. Note that new cluster features invoked by new client APIs or shell commands will not be usable. YARN applications that attempt to use new APIs (including new fields in data structures) that have not yet deployed to the cluster can expect link exceptions.
+* Client-Server compatibility is also required to allow upgrading individual components without upgrading others. For example, upgrade HDFS from version 2.1.0 to 2.2.0 without upgrading MapReduce.
+* Server-Server compatibility is required to allow mixed versions within an active cluster so the cluster may be upgraded without downtime in a rolling fashion.
+
+#### Policy
+
+* Both Client-Server and Server-Server compatibility is preserved within a major release. (Different policies for different categories are yet to be considered.)
+* Compatibility can be broken only at a major release, though breaking compatibility even at major releases has grave consequences and should be discussed in the Hadoop community.
+* Hadoop protocols are defined in .proto (ProtocolBuffers) files. Client-Server protocols and Server-protocol .proto files are marked as stable. When a .proto file is marked as stable it means that changes should be made in a compatible fashion as described below:
+ * The following changes are compatible and are allowed at any time:
+ * Add an optional field, with the expectation that the code deals with the field missing due to communication with an older version of the code.
+ * Add a new rpc/method to the service
+ * Add a new optional request to a Message
+ * Rename a field
+ * Rename a .proto file
+ * Change .proto annotations that effect code generation (e.g. name of java package)
+ * The following changes are incompatible but can be considered only at a major release
+ * Change the rpc/method name
+ * Change the rpc/method parameter type or return type
+ * Remove an rpc/method
+ * Change the service name
+ * Change the name of a Message
+ * Modify a field type in an incompatible way (as defined recursively)
+ * Change an optional field to required
+ * Add or delete a required field
+ * Delete an optional field as long as the optional field has reasonable defaults to allow deletions
+ * The following changes are incompatible and hence never allowed
+ * Change a field id
+ * Reuse an old field that was previously deleted.
+ * Field numbers are cheap and changing and reusing is not a good idea.
+
+### Java Binary compatibility for end-user applications i.e. Apache Hadoop ABI
+
+As Apache Hadoop revisions are upgraded end-users reasonably expect that their applications should continue to work without any modifications. This is fulfilled as a result of support API compatibility, Semantic compatibility and Wire compatibility.
+
+However, Apache Hadoop is a very complex, distributed system and services a very wide variety of use-cases. In particular, Apache Hadoop MapReduce is a very, very wide API; in the sense that end-users may make wide-ranging assumptions such as layout of the local disk when their map/reduce tasks are executing, environment variables for their tasks etc. In such cases, it becomes very hard to fully specify, and support, absolute compatibility.
+
+#### Use cases
+
+* Existing MapReduce applications, including jars of existing packaged end-user applications and projects such as Apache Pig, Apache Hive, Cascading etc. should work unmodified when pointed to an upgraded Apache Hadoop cluster within a major release.
+* Existing YARN applications, including jars of existing packaged end-user applications and projects such as Apache Tez etc. should work unmodified when pointed to an upgraded Apache Hadoop cluster within a major release.
+* Existing applications which transfer data in/out of HDFS, including jars of existing packaged end-user applications and frameworks such as Apache Flume, should work unmodified when pointed to an upgraded Apache Hadoop cluster within a major release.
+
+#### Policy
+
+* Existing MapReduce, YARN & HDFS applications and frameworks should work unmodified within a major release i.e. Apache Hadoop ABI is supported.
+* A very minor fraction of applications maybe affected by changes to disk layouts etc., the developer community will strive to minimize these changes and will not make them within a minor version. In more egregious cases, we will consider strongly reverting these breaking changes and invalidating offending releases if necessary.
+* In particular for MapReduce applications, the developer community will try our best to support provide binary compatibility across major releases e.g. applications using org.apache.hadoop.mapred.
+* APIs are supported compatibly across hadoop-1.x and hadoop-2.x. See [Compatibility for MapReduce applications between hadoop-1.x and hadoop-2.x](../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/MapReduce_Compatibility_Hadoop1_Hadoop2.html) for more details.
+
+### REST APIs
+
+REST API compatibility corresponds to both the request (URLs) and responses to each request (content, which may contain other URLs). Hadoop REST APIs are specifically meant for stable use by clients across releases, even major releases. The following are the exposed REST APIs:
+
+* [WebHDFS](../hadoop-hdfs/WebHDFS.html) - Stable
+* [ResourceManager](../../hadoop-yarn/hadoop-yarn-site/ResourceManagerRest.html)
+* [NodeManager](../../hadoop-yarn/hadoop-yarn-site/NodeManagerRest.html)
+* [MR Application Master](../../hadoop-yarn/hadoop-yarn-site/MapredAppMasterRest.html)
+* [History Server](../../hadoop-yarn/hadoop-yarn-site/HistoryServerRest.html)
+
+#### Policy
+
+The APIs annotated stable in the text above preserve compatibility across at least one major release, and maybe deprecated by a newer version of the REST API in a major release.
+
+### Metrics/JMX
+
+While the Metrics API compatibility is governed by Java API compatibility, the actual metrics exposed by Hadoop need to be compatible for users to be able to automate using them (scripts etc.). Adding additional metrics is compatible. Modifying (eg changing the unit or measurement) or removing existing metrics breaks compatibility. Similarly, changes to JMX MBean object names also break compatibility.
+
+#### Policy
+
+Metrics should preserve compatibility within the major release.
+
+### File formats & Metadata
+
+User and system level data (including metadata) is stored in files of different formats. Changes to the metadata or the file formats used to store data/metadata can lead to incompatibilities between versions.
+
+#### User-level file formats
+
+Changes to formats that end-users use to store their data can prevent them for accessing the data in later releases, and hence it is highly important to keep those file-formats compatible. One can always add a "new" format improving upon an existing format. Examples of these formats include har, war, SequenceFileFormat etc.
+
+##### Policy
+
+* Non-forward-compatible user-file format changes are restricted to major releases. When user-file formats change, new releases are expected to read existing formats, but may write data in formats incompatible with prior releases. Also, the community shall prefer to create a new format that programs must opt in to instead of making incompatible changes to existing formats.
+
+#### System-internal file formats
+
+Hadoop internal data is also stored in files and again changing these formats can lead to incompatibilities. While such changes are not as devastating as the user-level file formats, a policy on when the compatibility can be broken is important.
+
+##### MapReduce
+
+MapReduce uses formats like I-File to store MapReduce-specific data.
+
+##### Policy
+
+MapReduce-internal formats like IFile maintain compatibility within a major release. Changes to these formats can cause in-flight jobs to fail and hence we should ensure newer clients can fetch shuffle-data from old servers in a compatible manner.
+
+##### HDFS Metadata
+
+HDFS persists metadata (the image and edit logs) in a particular format. Incompatible changes to either the format or the metadata prevent subsequent releases from reading older metadata. Such incompatible changes might require an HDFS "upgrade" to convert the metadata to make it accessible. Some changes can require more than one such "upgrades".
+
+Depending on the degree of incompatibility in the changes, the following potential scenarios can arise:
+
+* Automatic: The image upgrades automatically, no need for an explicit "upgrade".
+* Direct: The image is upgradable, but might require one explicit release "upgrade".
+* Indirect: The image is upgradable, but might require upgrading to intermediate release(s) first.
+* Not upgradeable: The image is not upgradeable.
+
+##### Policy
+
+* A release upgrade must allow a cluster to roll-back to the older version and its older disk format. The rollback needs to restore the original data, but not required to restore the updated data.
+* HDFS metadata changes must be upgradeable via any of the upgrade paths - automatic, direct or indirect.
+* More detailed policies based on the kind of upgrade are yet to be considered.
+
+### Command Line Interface (CLI)
+
+The Hadoop command line programs may be use either directly via the system shell or via shell scripts. Changing the path of a command, removing or renaming command line options, the order of arguments, or the command return code and output break compatibility and may adversely affect users.
+
+#### Policy
+
+CLI commands are to be deprecated (warning when used) for one major release before they are removed or incompatibly modified in a subsequent major release.
+
+### Web UI
+
+Web UI, particularly the content and layout of web pages, changes could potentially interfere with attempts to screen scrape the web pages for information.
+
+#### Policy
+
+Web pages are not meant to be scraped and hence incompatible changes to them are allowed at any time. Users are expected to use REST APIs to get any information.
+
+### Hadoop Configuration Files
+
+Users use (1) Hadoop-defined properties to configure and provide hints to Hadoop and (2) custom properties to pass information to jobs. Hence, compatibility of config properties is two-fold:
+
+* Modifying key-names, units of values, and default values of Hadoop-defined properties.
+* Custom configuration property keys should not conflict with the namespace of Hadoop-defined properties. Typically, users should avoid using prefixes used by Hadoop: hadoop, io, ipc, fs, net, file, ftp, s3, kfs, ha, file, dfs, mapred, mapreduce, yarn.
+
+#### Policy
+
+* Hadoop-defined properties are to be deprecated at least for one major release before being removed. Modifying units for existing properties is not allowed.
+* The default values of Hadoop-defined properties can be changed across minor/major releases, but will remain the same across point releases within a minor release.
+* Currently, there is NO explicit policy regarding when new prefixes can be added/removed, and the list of prefixes to be avoided for custom configuration properties. However, as noted above, users should avoid using prefixes used by Hadoop: hadoop, io, ipc, fs, net, file, ftp, s3, kfs, ha, file, dfs, mapred, mapreduce, yarn.
+
+### Directory Structure
+
+Source code, artifacts (source and tests), user logs, configuration files, output and job history are all stored on disk either local file system or HDFS. Changing the directory structure of these user-accessible files break compatibility, even in cases where the original path is preserved via symbolic links (if, for example, the path is accessed by a servlet that is configured to not follow symbolic links).
+
+#### Policy
+
+* The layout of source code and build artifacts can change anytime, particularly so across major versions. Within a major version, the developers will attempt (no guarantees) to preserve the directory structure; however, individual files can be added/moved/deleted. The best way to ensure patches stay in sync with the code is to get them committed to the Apache source tree.
+* The directory structure of configuration files, user logs, and job history will be preserved across minor and point releases within a major release.
+
+### Java Classpath
+
+User applications built against Hadoop might add all Hadoop jars (including Hadoop's library dependencies) to the application's classpath. Adding new dependencies or updating the version of existing dependencies may interfere with those in applications' classpaths.
+
+#### Policy
+
+Currently, there is NO policy on when Hadoop's dependencies can change.
+
+### Environment variables
+
+Users and related projects often utilize the exported environment variables (eg HADOOP\_CONF\_DIR), therefore removing or renaming environment variables is an incompatible change.
+
+#### Policy
+
+Currently, there is NO policy on when the environment variables can change. Developers try to limit changes to major releases.
+
+### Build artifacts
+
+Hadoop uses maven for project management and changing the artifacts can affect existing user workflows.
+
+#### Policy
+
+* Test artifacts: The test jars generated are strictly for internal use and are not expected to be used outside of Hadoop, similar to APIs annotated @Private, @Unstable.
+* Built artifacts: The hadoop-client artifact (maven groupId:artifactId) stays compatible within a major release, while the other artifacts can change in incompatible ways.
+
+### Hardware/Software Requirements
+
+To keep up with the latest advances in hardware, operating systems, JVMs, and other software, new Hadoop releases or some of their features might require higher versions of the same. For a specific environment, upgrading Hadoop might require upgrading other dependent software components.
+
+#### Policies
+
+* Hardware
+ * Architecture: The community has no plans to restrict Hadoop to specific architectures, but can have family-specific optimizations.
+ * Minimum resources: While there are no guarantees on the minimum resources required by Hadoop daemons, the community attempts to not increase requirements within a minor release.
+* Operating Systems: The community will attempt to maintain the same OS requirements (OS kernel versions) within a minor release. Currently GNU/Linux and Microsoft Windows are the OSes officially supported by the community while Apache Hadoop is known to work reasonably well on other OSes such as Apple MacOSX, Solaris etc.
+* The JVM requirements will not change across point releases within the same minor release except if the JVM version under question becomes unsupported. Minor/major releases might require later versions of JVM for some/all of the supported operating systems.
+* Other software: The community tries to maintain the minimum versions of additional software required by Hadoop. For example, ssh, kerberos etc.
+
+References
+----------
+
+Here are some relevant JIRAs and pages related to the topic:
+
+* The evolution of this document - [HADOOP-9517](https://issues.apache.org/jira/browse/HADOOP-9517)
+* Binary compatibility for MapReduce end-user applications between hadoop-1.x and hadoop-2.x - [MapReduce Compatibility between hadoop-1.x and hadoop-2.x](../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/MapReduce_Compatibility_Hadoop1_Hadoop2.html)
+* Annotations for interfaces as per interface classification schedule - [HADOOP-7391](https://issues.apache.org/jira/browse/HADOOP-7391) [Hadoop Interface Classification](./InterfaceClassification.html)
+* Compatibility for Hadoop 1.x releases - [HADOOP-5071](https://issues.apache.org/jira/browse/HADOOP-5071)
+* The [Hadoop Roadmap](http://wiki.apache.org/hadoop/Roadmap) page that captures other release policies
+
+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/DeprecatedProperties.md
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/DeprecatedProperties.md b/hadoop-common-project/hadoop-common/src/site/markdown/DeprecatedProperties.md
new file mode 100644
index 0000000..dae9928
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/DeprecatedProperties.md
@@ -0,0 +1,288 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Deprecated Properties
+=====================
+
+The following table lists the configuration property names that are deprecated in this version of Hadoop, and their replacements.
+
+| **Deprecated property name** | **New property name** |
+|:---- |:---- |
+| create.empty.dir.if.nonexist | mapreduce.jobcontrol.createdir.ifnotexist |
+| dfs.access.time.precision | dfs.namenode.accesstime.precision |
+| dfs.backup.address | dfs.namenode.backup.address |
+| dfs.backup.http.address | dfs.namenode.backup.http-address |
+| dfs.balance.bandwidthPerSec | dfs.datanode.balance.bandwidthPerSec |
+| dfs.block.size | dfs.blocksize |
+| dfs.data.dir | dfs.datanode.data.dir |
+| dfs.datanode.max.xcievers | dfs.datanode.max.transfer.threads |
+| dfs.df.interval | fs.df.interval |
+| dfs.federation.nameservice.id | dfs.nameservice.id |
+| dfs.federation.nameservices | dfs.nameservices |
+| dfs.http.address | dfs.namenode.http-address |
+| dfs.https.address | dfs.namenode.https-address |
+| dfs.https.client.keystore.resource | dfs.client.https.keystore.resource |
+| dfs.https.need.client.auth | dfs.client.https.need-auth |
+| dfs.max.objects | dfs.namenode.max.objects |
+| dfs.max-repl-streams | dfs.namenode.replication.max-streams |
+| dfs.name.dir | dfs.namenode.name.dir |
+| dfs.name.dir.restore | dfs.namenode.name.dir.restore |
+| dfs.name.edits.dir | dfs.namenode.edits.dir |
+| dfs.permissions | dfs.permissions.enabled |
+| dfs.permissions.supergroup | dfs.permissions.superusergroup |
+| dfs.read.prefetch.size | dfs.client.read.prefetch.size |
+| dfs.replication.considerLoad | dfs.namenode.replication.considerLoad |
+| dfs.replication.interval | dfs.namenode.replication.interval |
+| dfs.replication.min | dfs.namenode.replication.min |
+| dfs.replication.pending.timeout.sec | dfs.namenode.replication.pending.timeout-sec |
+| dfs.safemode.extension | dfs.namenode.safemode.extension |
+| dfs.safemode.threshold.pct | dfs.namenode.safemode.threshold-pct |
+| dfs.secondary.http.address | dfs.namenode.secondary.http-address |
+| dfs.socket.timeout | dfs.client.socket-timeout |
+| dfs.umaskmode | fs.permissions.umask-mode |
+| dfs.write.packet.size | dfs.client-write-packet-size |
+| fs.checkpoint.dir | dfs.namenode.checkpoint.dir |
+| fs.checkpoint.edits.dir | dfs.namenode.checkpoint.edits.dir |
+| fs.checkpoint.period | dfs.namenode.checkpoint.period |
+| fs.default.name | fs.defaultFS |
+| hadoop.configured.node.mapping | net.topology.configured.node.mapping |
+| hadoop.job.history.location | mapreduce.jobtracker.jobhistory.location |
+| hadoop.native.lib | io.native.lib.available |
+| hadoop.net.static.resolutions | mapreduce.tasktracker.net.static.resolutions |
+| hadoop.pipes.command-file.keep | mapreduce.pipes.commandfile.preserve |
+| hadoop.pipes.executable.interpretor | mapreduce.pipes.executable.interpretor |
+| hadoop.pipes.executable | mapreduce.pipes.executable |
+| hadoop.pipes.java.mapper | mapreduce.pipes.isjavamapper |
+| hadoop.pipes.java.recordreader | mapreduce.pipes.isjavarecordreader |
+| hadoop.pipes.java.recordwriter | mapreduce.pipes.isjavarecordwriter |
+| hadoop.pipes.java.reducer | mapreduce.pipes.isjavareducer |
+| hadoop.pipes.partitioner | mapreduce.pipes.partitioner |
+| heartbeat.recheck.interval | dfs.namenode.heartbeat.recheck-interval |
+| io.bytes.per.checksum | dfs.bytes-per-checksum |
+| io.sort.factor | mapreduce.task.io.sort.factor |
+| io.sort.mb | mapreduce.task.io.sort.mb |
+| io.sort.spill.percent | mapreduce.map.sort.spill.percent |
+| jobclient.completion.poll.interval | mapreduce.client.completion.pollinterval |
+| jobclient.output.filter | mapreduce.client.output.filter |
+| jobclient.progress.monitor.poll.interval | mapreduce.client.progressmonitor.pollinterval |
+| job.end.notification.url | mapreduce.job.end-notification.url |
+| job.end.retry.attempts | mapreduce.job.end-notification.retry.attempts |
+| job.end.retry.interval | mapreduce.job.end-notification.retry.interval |
+| job.local.dir | mapreduce.job.local.dir |
+| keep.failed.task.files | mapreduce.task.files.preserve.failedtasks |
+| keep.task.files.pattern | mapreduce.task.files.preserve.filepattern |
+| key.value.separator.in.input.line | mapreduce.input.keyvaluelinerecordreader.key.value.separator |
+| local.cache.size | mapreduce.tasktracker.cache.local.size |
+| map.input.file | mapreduce.map.input.file |
+| map.input.length | mapreduce.map.input.length |
+| map.input.start | mapreduce.map.input.start |
+| map.output.key.field.separator | mapreduce.map.output.key.field.separator |
+| map.output.key.value.fields.spec | mapreduce.fieldsel.map.output.key.value.fields.spec |
+| mapred.acls.enabled | mapreduce.cluster.acls.enabled |
+| mapred.binary.partitioner.left.offset | mapreduce.partition.binarypartitioner.left.offset |
+| mapred.binary.partitioner.right.offset | mapreduce.partition.binarypartitioner.right.offset |
+| mapred.cache.archives | mapreduce.job.cache.archives |
+| mapred.cache.archives.timestamps | mapreduce.job.cache.archives.timestamps |
+| mapred.cache.files | mapreduce.job.cache.files |
+| mapred.cache.files.timestamps | mapreduce.job.cache.files.timestamps |
+| mapred.cache.localArchives | mapreduce.job.cache.local.archives |
+| mapred.cache.localFiles | mapreduce.job.cache.local.files |
+| mapred.child.tmp | mapreduce.task.tmp.dir |
+| mapred.cluster.average.blacklist.threshold | mapreduce.jobtracker.blacklist.average.threshold |
+| mapred.cluster.map.memory.mb | mapreduce.cluster.mapmemory.mb |
+| mapred.cluster.max.map.memory.mb | mapreduce.jobtracker.maxmapmemory.mb |
+| mapred.cluster.max.reduce.memory.mb | mapreduce.jobtracker.maxreducememory.mb |
+| mapred.cluster.reduce.memory.mb | mapreduce.cluster.reducememory.mb |
+| mapred.committer.job.setup.cleanup.needed | mapreduce.job.committer.setup.cleanup.needed |
+| mapred.compress.map.output | mapreduce.map.output.compress |
+| mapred.data.field.separator | mapreduce.fieldsel.data.field.separator |
+| mapred.debug.out.lines | mapreduce.task.debugout.lines |
+| mapred.healthChecker.interval | mapreduce.tasktracker.healthchecker.interval |
+| mapred.healthChecker.script.args | mapreduce.tasktracker.healthchecker.script.args |
+| mapred.healthChecker.script.path | mapreduce.tasktracker.healthchecker.script.path |
+| mapred.healthChecker.script.timeout | mapreduce.tasktracker.healthchecker.script.timeout |
+| mapred.heartbeats.in.second | mapreduce.jobtracker.heartbeats.in.second |
+| mapred.hosts.exclude | mapreduce.jobtracker.hosts.exclude.filename |
+| mapred.hosts | mapreduce.jobtracker.hosts.filename |
+| mapred.inmem.merge.threshold | mapreduce.reduce.merge.inmem.threshold |
+| mapred.input.dir.formats | mapreduce.input.multipleinputs.dir.formats |
+| mapred.input.dir.mappers | mapreduce.input.multipleinputs.dir.mappers |
+| mapred.input.dir | mapreduce.input.fileinputformat.inputdir |
+| mapred.input.pathFilter.class | mapreduce.input.pathFilter.class |
+| mapred.jar | mapreduce.job.jar |
+| mapred.job.classpath.archives | mapreduce.job.classpath.archives |
+| mapred.job.classpath.files | mapreduce.job.classpath.files |
+| mapred.job.id | mapreduce.job.id |
+| mapred.jobinit.threads | mapreduce.jobtracker.jobinit.threads |
+| mapred.job.map.memory.mb | mapreduce.map.memory.mb |
+| mapred.job.name | mapreduce.job.name |
+| mapred.job.priority | mapreduce.job.priority |
+| mapred.job.queue.name | mapreduce.job.queuename |
+| mapred.job.reduce.input.buffer.percent | mapreduce.reduce.input.buffer.percent |
+| mapred.job.reduce.markreset.buffer.percent | mapreduce.reduce.markreset.buffer.percent |
+| mapred.job.reduce.memory.mb | mapreduce.reduce.memory.mb |
+| mapred.job.reduce.total.mem.bytes | mapreduce.reduce.memory.totalbytes |
+| mapred.job.reuse.jvm.num.tasks | mapreduce.job.jvm.numtasks |
+| mapred.job.shuffle.input.buffer.percent | mapreduce.reduce.shuffle.input.buffer.percent |
+| mapred.job.shuffle.merge.percent | mapreduce.reduce.shuffle.merge.percent |
+| mapred.job.tracker.handler.count | mapreduce.jobtracker.handler.count |
+| mapred.job.tracker.history.completed.location | mapreduce.jobtracker.jobhistory.completed.location |
+| mapred.job.tracker.http.address | mapreduce.jobtracker.http.address |
+| mapred.jobtracker.instrumentation | mapreduce.jobtracker.instrumentation |
+| mapred.jobtracker.job.history.block.size | mapreduce.jobtracker.jobhistory.block.size |
+| mapred.job.tracker.jobhistory.lru.cache.size | mapreduce.jobtracker.jobhistory.lru.cache.size |
+| mapred.job.tracker | mapreduce.jobtracker.address |
+| mapred.jobtracker.maxtasks.per.job | mapreduce.jobtracker.maxtasks.perjob |
+| mapred.job.tracker.persist.jobstatus.active | mapreduce.jobtracker.persist.jobstatus.active |
+| mapred.job.tracker.persist.jobstatus.dir | mapreduce.jobtracker.persist.jobstatus.dir |
+| mapred.job.tracker.persist.jobstatus.hours | mapreduce.jobtracker.persist.jobstatus.hours |
+| mapred.jobtracker.restart.recover | mapreduce.jobtracker.restart.recover |
+| mapred.job.tracker.retiredjobs.cache.size | mapreduce.jobtracker.retiredjobs.cache.size |
+| mapred.job.tracker.retire.jobs | mapreduce.jobtracker.retirejobs |
+| mapred.jobtracker.taskalloc.capacitypad | mapreduce.jobtracker.taskscheduler.taskalloc.capacitypad |
+| mapred.jobtracker.taskScheduler | mapreduce.jobtracker.taskscheduler |
+| mapred.jobtracker.taskScheduler.maxRunningTasksPerJob | mapreduce.jobtracker.taskscheduler.maxrunningtasks.perjob |
+| mapred.join.expr | mapreduce.join.expr |
+| mapred.join.keycomparator | mapreduce.join.keycomparator |
+| mapred.lazy.output.format | mapreduce.output.lazyoutputformat.outputformat |
+| mapred.line.input.format.linespermap | mapreduce.input.lineinputformat.linespermap |
+| mapred.linerecordreader.maxlength | mapreduce.input.linerecordreader.line.maxlength |
+| mapred.local.dir | mapreduce.cluster.local.dir |
+| mapred.local.dir.minspacekill | mapreduce.tasktracker.local.dir.minspacekill |
+| mapred.local.dir.minspacestart | mapreduce.tasktracker.local.dir.minspacestart |
+| mapred.map.child.env | mapreduce.map.env |
+| mapred.map.child.java.opts | mapreduce.map.java.opts |
+| mapred.map.child.log.level | mapreduce.map.log.level |
+| mapred.map.max.attempts | mapreduce.map.maxattempts |
+| mapred.map.output.compression.codec | mapreduce.map.output.compress.codec |
+| mapred.mapoutput.key.class | mapreduce.map.output.key.class |
+| mapred.mapoutput.value.class | mapreduce.map.output.value.class |
+| mapred.mapper.regex.group | mapreduce.mapper.regexmapper..group |
+| mapred.mapper.regex | mapreduce.mapper.regex |
+| mapred.map.task.debug.script | mapreduce.map.debug.script |
+| mapred.map.tasks | mapreduce.job.maps |
+| mapred.map.tasks.speculative.execution | mapreduce.map.speculative |
+| mapred.max.map.failures.percent | mapreduce.map.failures.maxpercent |
+| mapred.max.reduce.failures.percent | mapreduce.reduce.failures.maxpercent |
+| mapred.max.split.size | mapreduce.input.fileinputformat.split.maxsize |
+| mapred.max.tracker.blacklists | mapreduce.jobtracker.tasktracker.maxblacklists |
+| mapred.max.tracker.failures | mapreduce.job.maxtaskfailures.per.tracker |
+| mapred.merge.recordsBeforeProgress | mapreduce.task.merge.progress.records |
+| mapred.min.split.size | mapreduce.input.fileinputformat.split.minsize |
+| mapred.min.split.size.per.node | mapreduce.input.fileinputformat.split.minsize.per.node |
+| mapred.min.split.size.per.rack | mapreduce.input.fileinputformat.split.minsize.per.rack |
+| mapred.output.compression.codec | mapreduce.output.fileoutputformat.compress.codec |
+| mapred.output.compression.type | mapreduce.output.fileoutputformat.compress.type |
+| mapred.output.compress | mapreduce.output.fileoutputformat.compress |
+| mapred.output.dir | mapreduce.output.fileoutputformat.outputdir |
+| mapred.output.key.class | mapreduce.job.output.key.class |
+| mapred.output.key.comparator.class | mapreduce.job.output.key.comparator.class |
+| mapred.output.value.class | mapreduce.job.output.value.class |
+| mapred.output.value.groupfn.class | mapreduce.job.output.group.comparator.class |
+| mapred.permissions.supergroup | mapreduce.cluster.permissions.supergroup |
+| mapred.pipes.user.inputformat | mapreduce.pipes.inputformat |
+| mapred.reduce.child.env | mapreduce.reduce.env |
+| mapred.reduce.child.java.opts | mapreduce.reduce.java.opts |
+| mapred.reduce.child.log.level | mapreduce.reduce.log.level |
+| mapred.reduce.max.attempts | mapreduce.reduce.maxattempts |
+| mapred.reduce.parallel.copies | mapreduce.reduce.shuffle.parallelcopies |
+| mapred.reduce.slowstart.completed.maps | mapreduce.job.reduce.slowstart.completedmaps |
+| mapred.reduce.task.debug.script | mapreduce.reduce.debug.script |
+| mapred.reduce.tasks | mapreduce.job.reduces |
+| mapred.reduce.tasks.speculative.execution | mapreduce.reduce.speculative |
+| mapred.seqbinary.output.key.class | mapreduce.output.seqbinaryoutputformat.key.class |
+| mapred.seqbinary.output.value.class | mapreduce.output.seqbinaryoutputformat.value.class |
+| mapred.shuffle.connect.timeout | mapreduce.reduce.shuffle.connect.timeout |
+| mapred.shuffle.read.timeout | mapreduce.reduce.shuffle.read.timeout |
+| mapred.skip.attempts.to.start.skipping | mapreduce.task.skip.start.attempts |
+| mapred.skip.map.auto.incr.proc.count | mapreduce.map.skip.proc-count.auto-incr |
+| mapred.skip.map.max.skip.records | mapreduce.map.skip.maxrecords |
+| mapred.skip.on | mapreduce.job.skiprecords |
+| mapred.skip.out.dir | mapreduce.job.skip.outdir |
+| mapred.skip.reduce.auto.incr.proc.count | mapreduce.reduce.skip.proc-count.auto-incr |
+| mapred.skip.reduce.max.skip.groups | mapreduce.reduce.skip.maxgroups |
+| mapred.speculative.execution.slowNodeThreshold | mapreduce.job.speculative.slownodethreshold |
+| mapred.speculative.execution.slowTaskThreshold | mapreduce.job.speculative.slowtaskthreshold |
+| mapred.speculative.execution.speculativeCap | mapreduce.job.speculative.speculativecap |
+| mapred.submit.replication | mapreduce.client.submit.file.replication |
+| mapred.system.dir | mapreduce.jobtracker.system.dir |
+| mapred.task.cache.levels | mapreduce.jobtracker.taskcache.levels |
+| mapred.task.id | mapreduce.task.attempt.id |
+| mapred.task.is.map | mapreduce.task.ismap |
+| mapred.task.partition | mapreduce.task.partition |
+| mapred.task.profile | mapreduce.task.profile |
+| mapred.task.profile.maps | mapreduce.task.profile.maps |
+| mapred.task.profile.params | mapreduce.task.profile.params |
+| mapred.task.profile.reduces | mapreduce.task.profile.reduces |
+| mapred.task.timeout | mapreduce.task.timeout |
+| mapred.tasktracker.dns.interface | mapreduce.tasktracker.dns.interface |
+| mapred.tasktracker.dns.nameserver | mapreduce.tasktracker.dns.nameserver |
+| mapred.tasktracker.events.batchsize | mapreduce.tasktracker.events.batchsize |
+| mapred.tasktracker.expiry.interval | mapreduce.jobtracker.expire.trackers.interval |
+| mapred.task.tracker.http.address | mapreduce.tasktracker.http.address |
+| mapred.tasktracker.indexcache.mb | mapreduce.tasktracker.indexcache.mb |
+| mapred.tasktracker.instrumentation | mapreduce.tasktracker.instrumentation |
+| mapred.tasktracker.map.tasks.maximum | mapreduce.tasktracker.map.tasks.maximum |
+| mapred.tasktracker.memory\_calculator\_plugin | mapreduce.tasktracker.resourcecalculatorplugin |
+| mapred.tasktracker.memorycalculatorplugin | mapreduce.tasktracker.resourcecalculatorplugin |
+| mapred.tasktracker.reduce.tasks.maximum | mapreduce.tasktracker.reduce.tasks.maximum |
+| mapred.task.tracker.report.address | mapreduce.tasktracker.report.address |
+| mapred.task.tracker.task-controller | mapreduce.tasktracker.taskcontroller |
+| mapred.tasktracker.taskmemorymanager.monitoring-interval | mapreduce.tasktracker.taskmemorymanager.monitoringinterval |
+| mapred.tasktracker.tasks.sleeptime-before-sigkill | mapreduce.tasktracker.tasks.sleeptimebeforesigkill |
+| mapred.temp.dir | mapreduce.cluster.temp.dir |
+| mapred.text.key.comparator.options | mapreduce.partition.keycomparator.options |
+| mapred.text.key.partitioner.options | mapreduce.partition.keypartitioner.options |
+| mapred.textoutputformat.separator | mapreduce.output.textoutputformat.separator |
+| mapred.tip.id | mapreduce.task.id |
+| mapreduce.combine.class | mapreduce.job.combine.class |
+| mapreduce.inputformat.class | mapreduce.job.inputformat.class |
+| mapreduce.job.counters.limit | mapreduce.job.counters.max |
+| mapreduce.jobtracker.permissions.supergroup | mapreduce.cluster.permissions.supergroup |
+| mapreduce.map.class | mapreduce.job.map.class |
+| mapreduce.outputformat.class | mapreduce.job.outputformat.class |
+| mapreduce.partitioner.class | mapreduce.job.partitioner.class |
+| mapreduce.reduce.class | mapreduce.job.reduce.class |
+| mapred.used.genericoptionsparser | mapreduce.client.genericoptionsparser.used |
+| mapred.userlog.limit.kb | mapreduce.task.userlog.limit.kb |
+| mapred.userlog.retain.hours | mapreduce.job.userlog.retain.hours |
+| mapred.working.dir | mapreduce.job.working.dir |
+| mapred.work.output.dir | mapreduce.task.output.dir |
+| min.num.spills.for.combine | mapreduce.map.combine.minspills |
+| reduce.output.key.value.fields.spec | mapreduce.fieldsel.reduce.output.key.value.fields.spec |
+| security.job.submission.protocol.acl | security.job.client.protocol.acl |
+| security.task.umbilical.protocol.acl | security.job.task.protocol.acl |
+| sequencefile.filter.class | mapreduce.input.sequencefileinputfilter.class |
+| sequencefile.filter.frequency | mapreduce.input.sequencefileinputfilter.frequency |
+| sequencefile.filter.regex | mapreduce.input.sequencefileinputfilter.regex |
+| session.id | dfs.metrics.session-id |
+| slave.host.name | dfs.datanode.hostname |
+| slave.host.name | mapreduce.tasktracker.host.name |
+| tasktracker.contention.tracking | mapreduce.tasktracker.contention.tracking |
+| tasktracker.http.threads | mapreduce.tasktracker.http.threads |
+| topology.node.switch.mapping.impl | net.topology.node.switch.mapping.impl |
+| topology.script.file.name | net.topology.script.file.name |
+| topology.script.number.args | net.topology.script.number.args |
+| user.name | mapreduce.job.user.name |
+| webinterface.private.actions | mapreduce.jobtracker.webinterface.trusted |
+| yarn.app.mapreduce.yarn.app.mapreduce.client-am.ipc.max-retries-on-timeouts | yarn.app.mapreduce.client-am.ipc.max-retries-on-timeouts |
+
+The following table lists additional changes to some configuration properties:
+
+| **Deprecated property name** | **New property name** |
+|:---- |:---- |
+| mapred.create.symlink | NONE - symlinking is always on |
+| mapreduce.job.cache.symlink.create | NONE - symlinking is always on |
+
+
[5/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Posted by aw...@apache.org.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/Metrics.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/Metrics.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/Metrics.apt.vm
deleted file mode 100644
index 02ff28b..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/Metrics.apt.vm
+++ /dev/null
@@ -1,879 +0,0 @@
-~~ Licensed to the Apache Software Foundation (ASF) under one or more
-~~ contributor license agreements. See the NOTICE file distributed with
-~~ this work for additional information regarding copyright ownership.
-~~ The ASF licenses this file to You under the Apache License, Version 2.0
-~~ (the "License"); you may not use this file except in compliance with
-~~ the License. You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License.
-
- ---
- Metrics Guide
- ---
- ---
- ${maven.build.timestamp}
-
-%{toc}
-
-Overview
-
- Metrics are statistical information exposed by Hadoop daemons,
- used for monitoring, performance tuning and debug.
- There are many metrics available by default
- and they are very useful for troubleshooting.
- This page shows the details of the available metrics.
-
- Each section describes each context into which metrics are grouped.
-
- The documentation of Metrics 2.0 framework is
- {{{../../api/org/apache/hadoop/metrics2/package-summary.html}here}}.
-
-jvm context
-
-* JvmMetrics
-
- Each metrics record contains tags such as ProcessName, SessionID
- and Hostname as additional information along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<MemNonHeapUsedM>>> | Current non-heap memory used in MB
-*-------------------------------------+--------------------------------------+
-|<<<MemNonHeapCommittedM>>> | Current non-heap memory committed in MB
-*-------------------------------------+--------------------------------------+
-|<<<MemNonHeapMaxM>>> | Max non-heap memory size in MB
-*-------------------------------------+--------------------------------------+
-|<<<MemHeapUsedM>>> | Current heap memory used in MB
-*-------------------------------------+--------------------------------------+
-|<<<MemHeapCommittedM>>> | Current heap memory committed in MB
-*-------------------------------------+--------------------------------------+
-|<<<MemHeapMaxM>>> | Max heap memory size in MB
-*-------------------------------------+--------------------------------------+
-|<<<MemMaxM>>> | Max memory size in MB
-*-------------------------------------+--------------------------------------+
-|<<<ThreadsNew>>> | Current number of NEW threads
-*-------------------------------------+--------------------------------------+
-|<<<ThreadsRunnable>>> | Current number of RUNNABLE threads
-*-------------------------------------+--------------------------------------+
-|<<<ThreadsBlocked>>> | Current number of BLOCKED threads
-*-------------------------------------+--------------------------------------+
-|<<<ThreadsWaiting>>> | Current number of WAITING threads
-*-------------------------------------+--------------------------------------+
-|<<<ThreadsTimedWaiting>>> | Current number of TIMED_WAITING threads
-*-------------------------------------+--------------------------------------+
-|<<<ThreadsTerminated>>> | Current number of TERMINATED threads
-*-------------------------------------+--------------------------------------+
-|<<<GcInfo>>> | Total GC count and GC time in msec, grouped by the kind of GC. \
- | ex.) GcCountPS Scavenge=6, GCTimeMillisPS Scavenge=40,
- | GCCountPS MarkSweep=0, GCTimeMillisPS MarkSweep=0
-*-------------------------------------+--------------------------------------+
-|<<<GcCount>>> | Total GC count
-*-------------------------------------+--------------------------------------+
-|<<<GcTimeMillis>>> | Total GC time in msec
-*-------------------------------------+--------------------------------------+
-|<<<LogFatal>>> | Total number of FATAL logs
-*-------------------------------------+--------------------------------------+
-|<<<LogError>>> | Total number of ERROR logs
-*-------------------------------------+--------------------------------------+
-|<<<LogWarn>>> | Total number of WARN logs
-*-------------------------------------+--------------------------------------+
-|<<<LogInfo>>> | Total number of INFO logs
-*-------------------------------------+--------------------------------------+
-|<<<GcNumWarnThresholdExceeded>>> | Number of times that the GC warn
- | threshold is exceeded
-*-------------------------------------+--------------------------------------+
-|<<<GcNumInfoThresholdExceeded>>> | Number of times that the GC info
- | threshold is exceeded
-*-------------------------------------+--------------------------------------+
-|<<<GcTotalExtraSleepTime>>> | Total GC extra sleep time in msec
-*-------------------------------------+--------------------------------------+
-
-rpc context
-
-* rpc
-
- Each metrics record contains tags such as Hostname
- and port (number to which server is bound)
- as additional information along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<ReceivedBytes>>> | Total number of received bytes
-*-------------------------------------+--------------------------------------+
-|<<<SentBytes>>> | Total number of sent bytes
-*-------------------------------------+--------------------------------------+
-|<<<RpcQueueTimeNumOps>>> | Total number of RPC calls
-*-------------------------------------+--------------------------------------+
-|<<<RpcQueueTimeAvgTime>>> | Average queue time in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<RpcProcessingTimeNumOps>>> | Total number of RPC calls (same to
- | RpcQueueTimeNumOps)
-*-------------------------------------+--------------------------------------+
-|<<<RpcProcessingAvgTime>>> | Average Processing time in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<RpcAuthenticationFailures>>> | Total number of authentication failures
-*-------------------------------------+--------------------------------------+
-|<<<RpcAuthenticationSuccesses>>> | Total number of authentication successes
-*-------------------------------------+--------------------------------------+
-|<<<RpcAuthorizationFailures>>> | Total number of authorization failures
-*-------------------------------------+--------------------------------------+
-|<<<RpcAuthorizationSuccesses>>> | Total number of authorization successes
-*-------------------------------------+--------------------------------------+
-|<<<NumOpenConnections>>> | Current number of open connections
-*-------------------------------------+--------------------------------------+
-|<<<CallQueueLength>>> | Current length of the call queue
-*-------------------------------------+--------------------------------------+
-|<<<rpcQueueTime>>><num><<<sNumOps>>> | Shows total number of RPC calls
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcQueueTime>>><num><<<s50thPercentileLatency>>> |
-| | Shows the 50th percentile of RPC queue time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcQueueTime>>><num><<<s75thPercentileLatency>>> |
-| | Shows the 75th percentile of RPC queue time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcQueueTime>>><num><<<s90thPercentileLatency>>> |
-| | Shows the 90th percentile of RPC queue time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcQueueTime>>><num><<<s95thPercentileLatency>>> |
-| | Shows the 95th percentile of RPC queue time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcQueueTime>>><num><<<s99thPercentileLatency>>> |
-| | Shows the 99th percentile of RPC queue time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcProcessingTime>>><num><<<sNumOps>>> | Shows total number of RPC calls
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcProcessingTime>>><num><<<s50thPercentileLatency>>> |
-| | Shows the 50th percentile of RPC processing time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcProcessingTime>>><num><<<s75thPercentileLatency>>> |
-| | Shows the 75th percentile of RPC processing time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcProcessingTime>>><num><<<s90thPercentileLatency>>> |
-| | Shows the 90th percentile of RPC processing time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcProcessingTime>>><num><<<s95thPercentileLatency>>> |
-| | Shows the 95th percentile of RPC processing time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<rpcProcessingTime>>><num><<<s99thPercentileLatency>>> |
-| | Shows the 99th percentile of RPC processing time in milliseconds
-| | (<num> seconds granularity) if <<<rpc.metrics.quantile.enable>>> is set to
-| | true. <num> is specified by <<<rpc.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-
-* RetryCache/NameNodeRetryCache
-
- RetryCache metrics is useful to monitor NameNode fail-over.
- Each metrics record contains Hostname tag.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<CacheHit>>> | Total number of RetryCache hit
-*-------------------------------------+--------------------------------------+
-|<<<CacheCleared>>> | Total number of RetryCache cleared
-*-------------------------------------+--------------------------------------+
-|<<<CacheUpdated>>> | Total number of RetryCache updated
-*-------------------------------------+--------------------------------------+
-
-rpcdetailed context
-
- Metrics of rpcdetailed context are exposed in unified manner by RPC
- layer. Two metrics are exposed for each RPC based on its name.
- Metrics named "(RPC method name)NumOps" indicates total number of
- method calls, and metrics named "(RPC method name)AvgTime" shows
- average turn around time for method calls in milliseconds.
-
-* rpcdetailed
-
- Each metrics record contains tags such as Hostname
- and port (number to which server is bound)
- as additional information along with metrics.
-
- The Metrics about RPCs which is not called are not included
- in metrics record.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<methodname><<<NumOps>>> | Total number of the times the method is called
-*-------------------------------------+--------------------------------------+
-|<methodname><<<AvgTime>>> | Average turn around time of the method in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-
-dfs context
-
-* namenode
-
- Each metrics record contains tags such as ProcessName, SessionId,
- and Hostname as additional information along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<CreateFileOps>>> | Total number of files created
-*-------------------------------------+--------------------------------------+
-|<<<FilesCreated>>> | Total number of files and directories created by create
- | or mkdir operations
-*-------------------------------------+--------------------------------------+
-|<<<FilesAppended>>> | Total number of files appended
-*-------------------------------------+--------------------------------------+
-|<<<GetBlockLocations>>> | Total number of getBlockLocations operations
-*-------------------------------------+--------------------------------------+
-|<<<FilesRenamed>>> | Total number of rename <<operations>> (NOT number of
- | files/dirs renamed)
-*-------------------------------------+--------------------------------------+
-|<<<GetListingOps>>> | Total number of directory listing operations
-*-------------------------------------+--------------------------------------+
-|<<<DeleteFileOps>>> | Total number of delete operations
-*-------------------------------------+--------------------------------------+
-|<<<FilesDeleted>>> | Total number of files and directories deleted by delete
- | or rename operations
-*-------------------------------------+--------------------------------------+
-|<<<FileInfoOps>>> | Total number of getFileInfo and getLinkFileInfo
- | operations
-*-------------------------------------+--------------------------------------+
-|<<<AddBlockOps>>> | Total number of addBlock operations succeeded
-*-------------------------------------+--------------------------------------+
-|<<<GetAdditionalDatanodeOps>>> | Total number of getAdditionalDatanode
- | operations
-*-------------------------------------+--------------------------------------+
-|<<<CreateSymlinkOps>>> | Total number of createSymlink operations
-*-------------------------------------+--------------------------------------+
-|<<<GetLinkTargetOps>>> | Total number of getLinkTarget operations
-*-------------------------------------+--------------------------------------+
-|<<<FilesInGetListingOps>>> | Total number of files and directories listed by
- | directory listing operations
-*-------------------------------------+--------------------------------------+
-|<<<AllowSnapshotOps>>> | Total number of allowSnapshot operations
-*-------------------------------------+--------------------------------------+
-|<<<DisallowSnapshotOps>>> | Total number of disallowSnapshot operations
-*-------------------------------------+--------------------------------------+
-|<<<CreateSnapshotOps>>> | Total number of createSnapshot operations
-*-------------------------------------+--------------------------------------+
-|<<<DeleteSnapshotOps>>> | Total number of deleteSnapshot operations
-*-------------------------------------+--------------------------------------+
-|<<<RenameSnapshotOps>>> | Total number of renameSnapshot operations
-*-------------------------------------+--------------------------------------+
-|<<<ListSnapshottableDirOps>>> | Total number of snapshottableDirectoryStatus
- | operations
-*-------------------------------------+--------------------------------------+
-|<<<SnapshotDiffReportOps>>> | Total number of getSnapshotDiffReport
- | operations
-*-------------------------------------+--------------------------------------+
-|<<<TransactionsNumOps>>> | Total number of Journal transactions
-*-------------------------------------+--------------------------------------+
-|<<<TransactionsAvgTime>>> | Average time of Journal transactions in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<SyncsNumOps>>> | Total number of Journal syncs
-*-------------------------------------+--------------------------------------+
-|<<<SyncsAvgTime>>> | Average time of Journal syncs in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<TransactionsBatchedInSync>>> | Total number of Journal transactions batched
- | in sync
-*-------------------------------------+--------------------------------------+
-|<<<BlockReportNumOps>>> | Total number of processing block reports from
- | DataNode
-*-------------------------------------+--------------------------------------+
-|<<<BlockReportAvgTime>>> | Average time of processing block reports in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<CacheReportNumOps>>> | Total number of processing cache reports from
- | DataNode
-*-------------------------------------+--------------------------------------+
-|<<<CacheReportAvgTime>>> | Average time of processing cache reports in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<SafeModeTime>>> | The interval between FSNameSystem starts and the last
- | time safemode leaves in milliseconds. \
- | (sometimes not equal to the time in SafeMode,
- | see {{{https://issues.apache.org/jira/browse/HDFS-5156}HDFS-5156}})
-*-------------------------------------+--------------------------------------+
-|<<<FsImageLoadTime>>> | Time loading FS Image at startup in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<FsImageLoadTime>>> | Time loading FS Image at startup in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<GetEditNumOps>>> | Total number of edits downloads from SecondaryNameNode
-*-------------------------------------+--------------------------------------+
-|<<<GetEditAvgTime>>> | Average edits download time in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<GetImageNumOps>>> |Total number of fsimage downloads from SecondaryNameNode
-*-------------------------------------+--------------------------------------+
-|<<<GetImageAvgTime>>> | Average fsimage download time in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<PutImageNumOps>>> | Total number of fsimage uploads to SecondaryNameNode
-*-------------------------------------+--------------------------------------+
-|<<<PutImageAvgTime>>> | Average fsimage upload time in milliseconds
-*-------------------------------------+--------------------------------------+
-
-* FSNamesystem
-
- Each metrics record contains tags such as HAState and Hostname
- as additional information along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<MissingBlocks>>> | Current number of missing blocks
-*-------------------------------------+--------------------------------------+
-|<<<ExpiredHeartbeats>>> | Total number of expired heartbeats
-*-------------------------------------+--------------------------------------+
-|<<<TransactionsSinceLastCheckpoint>>> | Total number of transactions since
- | last checkpoint
-*-------------------------------------+--------------------------------------+
-|<<<TransactionsSinceLastLogRoll>>> | Total number of transactions since last
- | edit log roll
-*-------------------------------------+--------------------------------------+
-|<<<LastWrittenTransactionId>>> | Last transaction ID written to the edit log
-*-------------------------------------+--------------------------------------+
-|<<<LastCheckpointTime>>> | Time in milliseconds since epoch of last checkpoint
-*-------------------------------------+--------------------------------------+
-|<<<CapacityTotal>>> | Current raw capacity of DataNodes in bytes
-*-------------------------------------+--------------------------------------+
-|<<<CapacityTotalGB>>> | Current raw capacity of DataNodes in GB
-*-------------------------------------+--------------------------------------+
-|<<<CapacityUsed>>> | Current used capacity across all DataNodes in bytes
-*-------------------------------------+--------------------------------------+
-|<<<CapacityUsedGB>>> | Current used capacity across all DataNodes in GB
-*-------------------------------------+--------------------------------------+
-|<<<CapacityRemaining>>> | Current remaining capacity in bytes
-*-------------------------------------+--------------------------------------+
-|<<<CapacityRemainingGB>>> | Current remaining capacity in GB
-*-------------------------------------+--------------------------------------+
-|<<<CapacityUsedNonDFS>>> | Current space used by DataNodes for non DFS
- | purposes in bytes
-*-------------------------------------+--------------------------------------+
-|<<<TotalLoad>>> | Current number of connections
-*-------------------------------------+--------------------------------------+
-|<<<SnapshottableDirectories>>> | Current number of snapshottable directories
-*-------------------------------------+--------------------------------------+
-|<<<Snapshots>>> | Current number of snapshots
-*-------------------------------------+--------------------------------------+
-|<<<BlocksTotal>>> | Current number of allocated blocks in the system
-*-------------------------------------+--------------------------------------+
-|<<<FilesTotal>>> | Current number of files and directories
-*-------------------------------------+--------------------------------------+
-|<<<PendingReplicationBlocks>>> | Current number of blocks pending to be
- | replicated
-*-------------------------------------+--------------------------------------+
-|<<<UnderReplicatedBlocks>>> | Current number of blocks under replicated
-*-------------------------------------+--------------------------------------+
-|<<<CorruptBlocks>>> | Current number of blocks with corrupt replicas.
-*-------------------------------------+--------------------------------------+
-|<<<ScheduledReplicationBlocks>>> | Current number of blocks scheduled for
- | replications
-*-------------------------------------+--------------------------------------+
-|<<<PendingDeletionBlocks>>> | Current number of blocks pending deletion
-*-------------------------------------+--------------------------------------+
-|<<<ExcessBlocks>>> | Current number of excess blocks
-*-------------------------------------+--------------------------------------+
-|<<<PostponedMisreplicatedBlocks>>> | (HA-only) Current number of blocks
- | postponed to replicate
-*-------------------------------------+--------------------------------------+
-|<<<PendingDataNodeMessageCourt>>> | (HA-only) Current number of pending
- | block-related messages for later
- | processing in the standby NameNode
-*-------------------------------------+--------------------------------------+
-|<<<MillisSinceLastLoadedEdits>>> | (HA-only) Time in milliseconds since the
- | last time standby NameNode load edit log.
- | In active NameNode, set to 0
-*-------------------------------------+--------------------------------------+
-|<<<BlockCapacity>>> | Current number of block capacity
-*-------------------------------------+--------------------------------------+
-|<<<StaleDataNodes>>> | Current number of DataNodes marked stale due to delayed
- | heartbeat
-*-------------------------------------+--------------------------------------+
-|<<<TotalFiles>>> |Current number of files and directories (same as FilesTotal)
-*-------------------------------------+--------------------------------------+
-
-* JournalNode
-
- The server-side metrics for a journal from the JournalNode's perspective.
- Each metrics record contains Hostname tag as additional information
- along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<Syncs60sNumOps>>> | Number of sync operations (1 minute granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs60s50thPercentileLatencyMicros>>> | The 50th percentile of sync
-| | latency in microseconds (1 minute granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs60s75thPercentileLatencyMicros>>> | The 75th percentile of sync
-| | latency in microseconds (1 minute granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs60s90thPercentileLatencyMicros>>> | The 90th percentile of sync
-| | latency in microseconds (1 minute granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs60s95thPercentileLatencyMicros>>> | The 95th percentile of sync
-| | latency in microseconds (1 minute granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs60s99thPercentileLatencyMicros>>> | The 99th percentile of sync
-| | latency in microseconds (1 minute granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs300sNumOps>>> | Number of sync operations (5 minutes granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs300s50thPercentileLatencyMicros>>> | The 50th percentile of sync
-| | latency in microseconds (5 minutes granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs300s75thPercentileLatencyMicros>>> | The 75th percentile of sync
-| | latency in microseconds (5 minutes granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs300s90thPercentileLatencyMicros>>> | The 90th percentile of sync
-| | latency in microseconds (5 minutes granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs300s95thPercentileLatencyMicros>>> | The 95th percentile of sync
-| | latency in microseconds (5 minutes granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs300s99thPercentileLatencyMicros>>> | The 99th percentile of sync
-| | latency in microseconds (5 minutes granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs3600sNumOps>>> | Number of sync operations (1 hour granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs3600s50thPercentileLatencyMicros>>> | The 50th percentile of sync
-| | latency in microseconds (1 hour granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs3600s75thPercentileLatencyMicros>>> | The 75th percentile of sync
-| | latency in microseconds (1 hour granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs3600s90thPercentileLatencyMicros>>> | The 90th percentile of sync
-| | latency in microseconds (1 hour granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs3600s95thPercentileLatencyMicros>>> | The 95th percentile of sync
-| | latency in microseconds (1 hour granularity)
-*-------------------------------------+--------------------------------------+
-|<<<Syncs3600s99thPercentileLatencyMicros>>> | The 99th percentile of sync
-| | latency in microseconds (1 hour granularity)
-*-------------------------------------+--------------------------------------+
-|<<<BatchesWritten>>> | Total number of batches written since startup
-*-------------------------------------+--------------------------------------+
-|<<<TxnsWritten>>> | Total number of transactions written since startup
-*-------------------------------------+--------------------------------------+
-|<<<BytesWritten>>> | Total number of bytes written since startup
-*-------------------------------------+--------------------------------------+
-|<<<BatchesWrittenWhileLagging>>> | Total number of batches written where this
-| | node was lagging
-*-------------------------------------+--------------------------------------+
-|<<<LastWriterEpoch>>> | Current writer's epoch number
-*-------------------------------------+--------------------------------------+
-|<<<CurrentLagTxns>>> | The number of transactions that this JournalNode is
-| | lagging
-*-------------------------------------+--------------------------------------+
-|<<<LastWrittenTxId>>> | The highest transaction id stored on this JournalNode
-*-------------------------------------+--------------------------------------+
-|<<<LastPromisedEpoch>>> | The last epoch number which this node has promised
-| | not to accept any lower epoch, or 0 if no promises have been made
-*-------------------------------------+--------------------------------------+
-
-* datanode
-
- Each metrics record contains tags such as SessionId and Hostname
- as additional information along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<BytesWritten>>> | Total number of bytes written to DataNode
-*-------------------------------------+--------------------------------------+
-|<<<BytesRead>>> | Total number of bytes read from DataNode
-*-------------------------------------+--------------------------------------+
-|<<<BlocksWritten>>> | Total number of blocks written to DataNode
-*-------------------------------------+--------------------------------------+
-|<<<BlocksRead>>> | Total number of blocks read from DataNode
-*-------------------------------------+--------------------------------------+
-|<<<BlocksReplicated>>> | Total number of blocks replicated
-*-------------------------------------+--------------------------------------+
-|<<<BlocksRemoved>>> | Total number of blocks removed
-*-------------------------------------+--------------------------------------+
-|<<<BlocksVerified>>> | Total number of blocks verified
-*-------------------------------------+--------------------------------------+
-|<<<BlockVerificationFailures>>> | Total number of verifications failures
-*-------------------------------------+--------------------------------------+
-|<<<BlocksCached>>> | Total number of blocks cached
-*-------------------------------------+--------------------------------------+
-|<<<BlocksUncached>>> | Total number of blocks uncached
-*-------------------------------------+--------------------------------------+
-|<<<ReadsFromLocalClient>>> | Total number of read operations from local client
-*-------------------------------------+--------------------------------------+
-|<<<ReadsFromRemoteClient>>> | Total number of read operations from remote
- | client
-*-------------------------------------+--------------------------------------+
-|<<<WritesFromLocalClient>>> | Total number of write operations from local
- | client
-*-------------------------------------+--------------------------------------+
-|<<<WritesFromRemoteClient>>> | Total number of write operations from remote
- | client
-*-------------------------------------+--------------------------------------+
-|<<<BlocksGetLocalPathInfo>>> | Total number of operations to get local path
- | names of blocks
-*-------------------------------------+--------------------------------------+
-|<<<FsyncCount>>> | Total number of fsync
-*-------------------------------------+--------------------------------------+
-|<<<VolumeFailures>>> | Total number of volume failures occurred
-*-------------------------------------+--------------------------------------+
-|<<<ReadBlockOpNumOps>>> | Total number of read operations
-*-------------------------------------+--------------------------------------+
-|<<<ReadBlockOpAvgTime>>> | Average time of read operations in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<WriteBlockOpNumOps>>> | Total number of write operations
-*-------------------------------------+--------------------------------------+
-|<<<WriteBlockOpAvgTime>>> | Average time of write operations in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<BlockChecksumOpNumOps>>> | Total number of blockChecksum operations
-*-------------------------------------+--------------------------------------+
-|<<<BlockChecksumOpAvgTime>>> | Average time of blockChecksum operations in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<CopyBlockOpNumOps>>> | Total number of block copy operations
-*-------------------------------------+--------------------------------------+
-|<<<CopyBlockOpAvgTime>>> | Average time of block copy operations in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<ReplaceBlockOpNumOps>>> | Total number of block replace operations
-*-------------------------------------+--------------------------------------+
-|<<<ReplaceBlockOpAvgTime>>> | Average time of block replace operations in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<HeartbeatsNumOps>>> | Total number of heartbeats
-*-------------------------------------+--------------------------------------+
-|<<<HeartbeatsAvgTime>>> | Average heartbeat time in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<BlockReportsNumOps>>> | Total number of block report operations
-*-------------------------------------+--------------------------------------+
-|<<<BlockReportsAvgTime>>> | Average time of block report operations in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<CacheReportsNumOps>>> | Total number of cache report operations
-*-------------------------------------+--------------------------------------+
-|<<<CacheReportsAvgTime>>> | Average time of cache report operations in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<PacketAckRoundTripTimeNanosNumOps>>> | Total number of ack round trip
-*-------------------------------------+--------------------------------------+
-|<<<PacketAckRoundTripTimeNanosAvgTime>>> | Average time from ack send to
-| | receive minus the downstream ack time in nanoseconds
-*-------------------------------------+--------------------------------------+
-|<<<FlushNanosNumOps>>> | Total number of flushes
-*-------------------------------------+--------------------------------------+
-|<<<FlushNanosAvgTime>>> | Average flush time in nanoseconds
-*-------------------------------------+--------------------------------------+
-|<<<FsyncNanosNumOps>>> | Total number of fsync
-*-------------------------------------+--------------------------------------+
-|<<<FsyncNanosAvgTime>>> | Average fsync time in nanoseconds
-*-------------------------------------+--------------------------------------+
-|<<<SendDataPacketBlockedOnNetworkNanosNumOps>>> | Total number of sending
- | packets
-*-------------------------------------+--------------------------------------+
-|<<<SendDataPacketBlockedOnNetworkNanosAvgTime>>> | Average waiting time of
-| | sending packets in nanoseconds
-*-------------------------------------+--------------------------------------+
-|<<<SendDataPacketTransferNanosNumOps>>> | Total number of sending packets
-*-------------------------------------+--------------------------------------+
-|<<<SendDataPacketTransferNanosAvgTime>>> | Average transfer time of sending
- | packets in nanoseconds
-*-------------------------------------+--------------------------------------+
-
-yarn context
-
-* ClusterMetrics
-
- ClusterMetrics shows the metrics of the YARN cluster from the
- ResourceManager's perspective. Each metrics record contains
- Hostname tag as additional information along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<NumActiveNMs>>> | Current number of active NodeManagers
-*-------------------------------------+--------------------------------------+
-|<<<NumDecommissionedNMs>>> | Current number of decommissioned NodeManagers
-*-------------------------------------+--------------------------------------+
-|<<<NumLostNMs>>> | Current number of lost NodeManagers for not sending
- | heartbeats
-*-------------------------------------+--------------------------------------+
-|<<<NumUnhealthyNMs>>> | Current number of unhealthy NodeManagers
-*-------------------------------------+--------------------------------------+
-|<<<NumRebootedNMs>>> | Current number of rebooted NodeManagers
-*-------------------------------------+--------------------------------------+
-
-* QueueMetrics
-
- QueueMetrics shows an application queue from the
- ResourceManager's perspective. Each metrics record shows
- the statistics of each queue, and contains tags such as
- queue name and Hostname as additional information along with metrics.
-
- In <<<running_>>><num> metrics such as <<<running_0>>>, you can set the
- property <<<yarn.resourcemanager.metrics.runtime.buckets>>> in yarn-site.xml
- to change the buckets. The default values is <<<60,300,1440>>>.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<running_0>>> | Current number of running applications whose elapsed time are
- | less than 60 minutes
-*-------------------------------------+--------------------------------------+
-|<<<running_60>>> | Current number of running applications whose elapsed time are
- | between 60 and 300 minutes
-*-------------------------------------+--------------------------------------+
-|<<<running_300>>> | Current number of running applications whose elapsed time are
- | between 300 and 1440 minutes
-*-------------------------------------+--------------------------------------+
-|<<<running_1440>>> | Current number of running applications elapsed time are
- | more than 1440 minutes
-*-------------------------------------+--------------------------------------+
-|<<<AppsSubmitted>>> | Total number of submitted applications
-*-------------------------------------+--------------------------------------+
-|<<<AppsRunning>>> | Current number of running applications
-*-------------------------------------+--------------------------------------+
-|<<<AppsPending>>> | Current number of applications that have not yet been
- | assigned by any containers
-*-------------------------------------+--------------------------------------+
-|<<<AppsCompleted>>> | Total number of completed applications
-*-------------------------------------+--------------------------------------+
-|<<<AppsKilled>>> | Total number of killed applications
-*-------------------------------------+--------------------------------------+
-|<<<AppsFailed>>> | Total number of failed applications
-*-------------------------------------+--------------------------------------+
-|<<<AllocatedMB>>> | Current allocated memory in MB
-*-------------------------------------+--------------------------------------+
-|<<<AllocatedVCores>>> | Current allocated CPU in virtual cores
-*-------------------------------------+--------------------------------------+
-|<<<AllocatedContainers>>> | Current number of allocated containers
-*-------------------------------------+--------------------------------------+
-|<<<AggregateContainersAllocated>>> | Total number of allocated containers
-*-------------------------------------+--------------------------------------+
-|<<<AggregateContainersReleased>>> | Total number of released containers
-*-------------------------------------+--------------------------------------+
-|<<<AvailableMB>>> | Current available memory in MB
-*-------------------------------------+--------------------------------------+
-|<<<AvailableVCores>>> | Current available CPU in virtual cores
-*-------------------------------------+--------------------------------------+
-|<<<PendingMB>>> | Current pending memory resource requests in MB that are
- | not yet fulfilled by the scheduler
-*-------------------------------------+--------------------------------------+
-|<<<PendingVCores>>> | Current pending CPU allocation requests in virtual
- | cores that are not yet fulfilled by the scheduler
-*-------------------------------------+--------------------------------------+
-|<<<PendingContainers>>> | Current pending resource requests that are not
- | yet fulfilled by the scheduler
-*-------------------------------------+--------------------------------------+
-|<<<ReservedMB>>> | Current reserved memory in MB
-*-------------------------------------+--------------------------------------+
-|<<<ReservedVCores>>> | Current reserved CPU in virtual cores
-*-------------------------------------+--------------------------------------+
-|<<<ReservedContainers>>> | Current number of reserved containers
-*-------------------------------------+--------------------------------------+
-|<<<ActiveUsers>>> | Current number of active users
-*-------------------------------------+--------------------------------------+
-|<<<ActiveApplications>>> | Current number of active applications
-*-------------------------------------+--------------------------------------+
-|<<<FairShareMB>>> | (FairScheduler only) Current fair share of memory in MB
-*-------------------------------------+--------------------------------------+
-|<<<FairShareVCores>>> | (FairScheduler only) Current fair share of CPU in
- | virtual cores
-*-------------------------------------+--------------------------------------+
-|<<<MinShareMB>>> | (FairScheduler only) Minimum share of memory in MB
-*-------------------------------------+--------------------------------------+
-|<<<MinShareVCores>>> | (FairScheduler only) Minimum share of CPU in virtual
- | cores
-*-------------------------------------+--------------------------------------+
-|<<<MaxShareMB>>> | (FairScheduler only) Maximum share of memory in MB
-*-------------------------------------+--------------------------------------+
-|<<<MaxShareVCores>>> | (FairScheduler only) Maximum share of CPU in virtual
- | cores
-*-------------------------------------+--------------------------------------+
-
-* NodeManagerMetrics
-
- NodeManagerMetrics shows the statistics of the containers in the node.
- Each metrics record contains Hostname tag as additional information
- along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<containersLaunched>>> | Total number of launched containers
-*-------------------------------------+--------------------------------------+
-|<<<containersCompleted>>> | Total number of successfully completed containers
-*-------------------------------------+--------------------------------------+
-|<<<containersFailed>>> | Total number of failed containers
-*-------------------------------------+--------------------------------------+
-|<<<containersKilled>>> | Total number of killed containers
-*-------------------------------------+--------------------------------------+
-|<<<containersIniting>>> | Current number of initializing containers
-*-------------------------------------+--------------------------------------+
-|<<<containersRunning>>> | Current number of running containers
-*-------------------------------------+--------------------------------------+
-|<<<allocatedContainers>>> | Current number of allocated containers
-*-------------------------------------+--------------------------------------+
-|<<<allocatedGB>>> | Current allocated memory in GB
-*-------------------------------------+--------------------------------------+
-|<<<availableGB>>> | Current available memory in GB
-*-------------------------------------+--------------------------------------+
-
-ugi context
-
-* UgiMetrics
-
- UgiMetrics is related to user and group information.
- Each metrics record contains Hostname tag as additional information
- along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<LoginSuccessNumOps>>> | Total number of successful kerberos logins
-*-------------------------------------+--------------------------------------+
-|<<<LoginSuccessAvgTime>>> | Average time for successful kerberos logins in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<LoginFailureNumOps>>> | Total number of failed kerberos logins
-*-------------------------------------+--------------------------------------+
-|<<<LoginFailureAvgTime>>> | Average time for failed kerberos logins in
- | milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<getGroupsNumOps>>> | Total number of group resolutions
-*-------------------------------------+--------------------------------------+
-|<<<getGroupsAvgTime>>> | Average time for group resolution in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<getGroups>>><num><<<sNumOps>>> |
-| | Total number of group resolutions (<num> seconds granularity). <num> is
-| | specified by <<<hadoop.user.group.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<getGroups>>><num><<<s50thPercentileLatency>>> |
-| | Shows the 50th percentile of group resolution time in milliseconds
-| | (<num> seconds granularity). <num> is specified by
-| | <<<hadoop.user.group.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<getGroups>>><num><<<s75thPercentileLatency>>> |
-| | Shows the 75th percentile of group resolution time in milliseconds
-| | (<num> seconds granularity). <num> is specified by
-| | <<<hadoop.user.group.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<getGroups>>><num><<<s90thPercentileLatency>>> |
-| | Shows the 90th percentile of group resolution time in milliseconds
-| | (<num> seconds granularity). <num> is specified by
-| | <<<hadoop.user.group.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<getGroups>>><num><<<s95thPercentileLatency>>> |
-| | Shows the 95th percentile of group resolution time in milliseconds
-| | (<num> seconds granularity). <num> is specified by
-| | <<<hadoop.user.group.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-|<<<getGroups>>><num><<<s99thPercentileLatency>>> |
-| | Shows the 99th percentile of group resolution time in milliseconds
-| | (<num> seconds granularity). <num> is specified by
-| | <<<hadoop.user.group.metrics.percentiles.intervals>>>.
-*-------------------------------------+--------------------------------------+
-
-metricssystem context
-
-* MetricsSystem
-
- MetricsSystem shows the statistics for metrics snapshots and publishes.
- Each metrics record contains Hostname tag as additional information
- along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<NumActiveSources>>> | Current number of active metrics sources
-*-------------------------------------+--------------------------------------+
-|<<<NumAllSources>>> | Total number of metrics sources
-*-------------------------------------+--------------------------------------+
-|<<<NumActiveSinks>>> | Current number of active sinks
-*-------------------------------------+--------------------------------------+
-|<<<NumAllSinks>>> | Total number of sinks \
- | (BUT usually less than <<<NumActiveSinks>>>,
- | see {{{https://issues.apache.org/jira/browse/HADOOP-9946}HADOOP-9946}})
-*-------------------------------------+--------------------------------------+
-|<<<SnapshotNumOps>>> | Total number of operations to snapshot statistics from
- | a metrics source
-*-------------------------------------+--------------------------------------+
-|<<<SnapshotAvgTime>>> | Average time in milliseconds to snapshot statistics
- | from a metrics source
-*-------------------------------------+--------------------------------------+
-|<<<PublishNumOps>>> | Total number of operations to publish statistics to a
- | sink
-*-------------------------------------+--------------------------------------+
-|<<<PublishAvgTime>>> | Average time in milliseconds to publish statistics to
- | a sink
-*-------------------------------------+--------------------------------------+
-|<<<DroppedPubAll>>> | Total number of dropped publishes
-*-------------------------------------+--------------------------------------+
-|<<<Sink_>>><instance><<<NumOps>>> | Total number of sink operations for the
- | <instance>
-*-------------------------------------+--------------------------------------+
-|<<<Sink_>>><instance><<<AvgTime>>> | Average time in milliseconds of sink
- | operations for the <instance>
-*-------------------------------------+--------------------------------------+
-|<<<Sink_>>><instance><<<Dropped>>> | Total number of dropped sink operations
- | for the <instance>
-*-------------------------------------+--------------------------------------+
-|<<<Sink_>>><instance><<<Qsize>>> | Current queue length of sink operations \
- | (BUT always set to 0 because nothing to
- | increment this metrics, see
- | {{{https://issues.apache.org/jira/browse/HADOOP-9941}HADOOP-9941}})
-*-------------------------------------+--------------------------------------+
-
-default context
-
-* StartupProgress
-
- StartupProgress metrics shows the statistics of NameNode startup.
- Four metrics are exposed for each startup phase based on its name.
- The startup <phase>s are <<<LoadingFsImage>>>, <<<LoadingEdits>>>,
- <<<SavingCheckpoint>>>, and <<<SafeMode>>>.
- Each metrics record contains Hostname tag as additional information
- along with metrics.
-
-*-------------------------------------+--------------------------------------+
-|| Name || Description
-*-------------------------------------+--------------------------------------+
-|<<<ElapsedTime>>> | Total elapsed time in milliseconds
-*-------------------------------------+--------------------------------------+
-|<<<PercentComplete>>> | Current rate completed in NameNode startup progress \
- | (The max value is not 100 but 1.0)
-*-------------------------------------+--------------------------------------+
-|<phase><<<Count>>> | Total number of steps completed in the phase
-*-------------------------------------+--------------------------------------+
-|<phase><<<ElapsedTime>>> | Total elapsed time in the phase in milliseconds
-*-------------------------------------+--------------------------------------+
-|<phase><<<Total>>> | Total number of steps in the phase
-*-------------------------------------+--------------------------------------+
-|<phase><<<PercentComplete>>> | Current rate completed in the phase \
- | (The max value is not 100 but 1.0)
-*-------------------------------------+--------------------------------------+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/NativeLibraries.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/NativeLibraries.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/NativeLibraries.apt.vm
deleted file mode 100644
index 866b428..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/NativeLibraries.apt.vm
+++ /dev/null
@@ -1,205 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Native Libraries Guide
- ---
- ---
- ${maven.build.timestamp}
-
-Native Libraries Guide
-
-%{toc|section=1|fromDepth=0}
-
-* Overview
-
- This guide describes the native hadoop library and includes a small
- discussion about native shared libraries.
-
- Note: Depending on your environment, the term "native libraries" could
- refer to all *.so's you need to compile; and, the term "native
- compression" could refer to all *.so's you need to compile that are
- specifically related to compression. Currently, however, this document
- only addresses the native hadoop library (<<<libhadoop.so>>>).
- The document for libhdfs library (<<<libhdfs.so>>>) is
- {{{../hadoop-hdfs/LibHdfs.html}here}}.
-
-* Native Hadoop Library
-
- Hadoop has native implementations of certain components for performance
- reasons and for non-availability of Java implementations. These
- components are available in a single, dynamically-linked native library
- called the native hadoop library. On the *nix platforms the library is
- named <<<libhadoop.so>>>.
-
-* Usage
-
- It is fairly easy to use the native hadoop library:
-
- [[1]] Review the components.
-
- [[2]] Review the supported platforms.
-
- [[3]] Either download a hadoop release, which will include a pre-built
- version of the native hadoop library, or build your own version of
- the native hadoop library. Whether you download or build, the name
- for the library is the same: libhadoop.so
-
- [[4]] Install the compression codec development packages (>zlib-1.2,
- >gzip-1.2):
-
- * If you download the library, install one or more development
- packages - whichever compression codecs you want to use with
- your deployment.
-
- * If you build the library, it is mandatory to install both
- development packages.
-
- [[5]] Check the runtime log files.
-
-* Components
-
- The native hadoop library includes various components:
-
- * Compression Codecs (bzip2, lz4, snappy, zlib)
-
- * Native IO utilities for {{{../hadoop-hdfs/ShortCircuitLocalReads.html}
- HDFS Short-Circuit Local Reads}} and
- {{{../hadoop-hdfs/CentralizedCacheManagement.html}Centralized Cache
- Management in HDFS}}
-
- * CRC32 checksum implementation
-
-* Supported Platforms
-
- The native hadoop library is supported on *nix platforms only. The
- library does not to work with Cygwin or the Mac OS X platform.
-
- The native hadoop library is mainly used on the GNU/Linus platform and
- has been tested on these distributions:
-
- * RHEL4/Fedora
-
- * Ubuntu
-
- * Gentoo
-
- On all the above distributions a 32/64 bit native hadoop library will
- work with a respective 32/64 bit jvm.
-
-* Download
-
- The pre-built 32-bit i386-Linux native hadoop library is available as
- part of the hadoop distribution and is located in the <<<lib/native>>>
- directory. You can download the hadoop distribution from Hadoop Common
- Releases.
-
- Be sure to install the zlib and/or gzip development packages -
- whichever compression codecs you want to use with your deployment.
-
-* Build
-
- The native hadoop library is written in ANSI C and is built using the
- GNU autotools-chain (autoconf, autoheader, automake, autoscan,
- libtool). This means it should be straight-forward to build the library
- on any platform with a standards-compliant C compiler and the GNU
- autotools-chain (see the supported platforms).
-
- The packages you need to install on the target platform are:
-
- * C compiler (e.g. GNU C Compiler)
-
- * GNU Autools Chain: autoconf, automake, libtool
-
- * zlib-development package (stable version >= 1.2.0)
-
- * openssl-development package(e.g. libssl-dev)
-
- Once you installed the prerequisite packages use the standard hadoop
- pom.xml file and pass along the native flag to build the native hadoop
- library:
-
-----
- $ mvn package -Pdist,native -DskipTests -Dtar
-----
-
- You should see the newly-built library in:
-
-----
- $ hadoop-dist/target/hadoop-${project.version}/lib/native
-----
-
- Please note the following:
-
- * It is mandatory to install both the zlib and gzip development
- packages on the target platform in order to build the native hadoop
- library; however, for deployment it is sufficient to install just
- one package if you wish to use only one codec.
-
- * It is necessary to have the correct 32/64 libraries for zlib,
- depending on the 32/64 bit jvm for the target platform, in order to
- build and deploy the native hadoop library.
-
-* Runtime
-
- The bin/hadoop script ensures that the native hadoop library is on the
- library path via the system property:
- <<<-Djava.library.path=<path> >>>
-
- During runtime, check the hadoop log files for your MapReduce tasks.
-
- * If everything is all right, then:
- <<<DEBUG util.NativeCodeLoader - Trying to load the custom-built native-hadoop library...>>>
- <<<INFO util.NativeCodeLoader - Loaded the native-hadoop library>>>
-
- * If something goes wrong, then:
- <<<INFO util.NativeCodeLoader - Unable to load native-hadoop library for your platform... using builtin-java classes where applicable>>>
-
-* Check
-
- NativeLibraryChecker is a tool to check whether native libraries are loaded correctly.
- You can launch NativeLibraryChecker as follows:
-
-----
- $ hadoop checknative -a
- 14/12/06 01:30:45 WARN bzip2.Bzip2Factory: Failed to load/initialize native-bzip2 library system-native, will use pure-Java version
- 14/12/06 01:30:45 INFO zlib.ZlibFactory: Successfully loaded & initialized native-zlib library
- Native library checking:
- hadoop: true /home/ozawa/hadoop/lib/native/libhadoop.so.1.0.0
- zlib: true /lib/x86_64-linux-gnu/libz.so.1
- snappy: true /usr/lib/libsnappy.so.1
- lz4: true revision:99
- bzip2: false
-----
-
-
-* Native Shared Libraries
-
- You can load any native shared library using DistributedCache for
- distributing and symlinking the library files.
-
- This example shows you how to distribute a shared library, mylib.so,
- and load it from a MapReduce task.
-
- [[1]] First copy the library to the HDFS:
- <<<bin/hadoop fs -copyFromLocal mylib.so.1 /libraries/mylib.so.1>>>
-
- [[2]] The job launching program should contain the following:
- <<<DistributedCache.createSymlink(conf);>>>
- <<<DistributedCache.addCacheFile("hdfs://host:port/libraries/mylib.so. 1#mylib.so", conf);>>>
-
- [[3]] The MapReduce task can contain:
- <<<System.loadLibrary("mylib.so");>>>
-
- Note: If you downloaded or built the native hadoop library, you don’t
- need to use DistibutedCache to make the library available to your
- MapReduce tasks.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/RackAwareness.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/RackAwareness.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/RackAwareness.apt.vm
deleted file mode 100644
index dbd8d92..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/RackAwareness.apt.vm
+++ /dev/null
@@ -1,140 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop ${project.version} - Rack Awareness
- ---
- ---
- ${maven.build.timestamp}
-
-%{toc|section=1|fromDepth=0}
-
-Rack Awareness
-
- Hadoop components are rack-aware. For example, HDFS block placement will
- use rack awareness for fault tolerance by placing one block replica on a
- different rack. This provides data availability in the event of a network
- switch failure or partition within the cluster.
-
- Hadoop master daemons obtain the rack id of the cluster slaves by invoking
- either an external script or java class as specified by configuration files.
- Using either the java class or external script for topology, output must
- adhere to the java <<org.apache.hadoop.net.DNSToSwitchMapping>>
- interface. The interface expects a one-to-one correspondence to be
- maintained and the topology information in the format of '/myrack/myhost',
- where '/' is the topology delimiter, 'myrack' is the rack identifier, and
- 'myhost' is the individual host. Assuming a single /24 subnet per rack,
- one could use the format of '/192.168.100.0/192.168.100.5' as a
- unique rack-host topology mapping.
-
- To use the java class for topology mapping, the class name is specified by
- the <<topology.node.switch.mapping.impl>> parameter in the configuration
- file. An example, NetworkTopology.java, is included with the hadoop
- distribution and can be customized by the Hadoop administrator. Using a
- Java class instead of an external script has a performance benefit in
- that Hadoop doesn't need to fork an external process when a new slave node
- registers itself.
-
- If implementing an external script, it will be specified with the
- <<topology.script.file.name>> parameter in the configuration files. Unlike
- the java class, the external topology script is not included with the Hadoop
- distribution and is provided by the administrator. Hadoop will send
- multiple IP addresses to ARGV when forking the topology script. The
- number of IP addresses sent to the topology script is controlled with
- <<net.topology.script.number.args>> and defaults to 100. If
- <<net.topology.script.number.args>> was changed to 1, a topology script
- would get forked for each IP submitted by DataNodes and/or NodeManagers.
-
- If <<topology.script.file.name>> or <<topology.node.switch.mapping.impl>> is
- not set, the rack id '/default-rack' is returned for any passed IP address.
- While this behavior appears desirable, it can cause issues with HDFS block
- replication as default behavior is to write one replicated block off rack
- and is unable to do so as there is only a single rack named '/default-rack'.
-
- An additional configuration setting is
- <<mapreduce.jobtracker.taskcache.levels>> which determines the number of
- levels (in the network topology) of caches MapReduce will use. So, for
- example, if it is the default value of 2, two levels of caches will be
- constructed - one for hosts (host -> task mapping) and another for racks
- (rack -> task mapping). Giving us our one-to-one mapping of '/myrack/myhost'.
-
-* {python Example}
-
-+-------------------------------+
- #!/usr/bin/python
- # this script makes assumptions about the physical environment.
- # 1) each rack is its own layer 3 network with a /24 subnet, which
- # could be typical where each rack has its own
- # switch with uplinks to a central core router.
- #
- # +-----------+
- # |core router|
- # +-----------+
- # / \
- # +-----------+ +-----------+
- # |rack switch| |rack switch|
- # +-----------+ +-----------+
- # | data node | | data node |
- # +-----------+ +-----------+
- # | data node | | data node |
- # +-----------+ +-----------+
- #
- # 2) topology script gets list of IP's as input, calculates network address, and prints '/network_address/ip'.
-
- import netaddr
- import sys
- sys.argv.pop(0) # discard name of topology script from argv list as we just want IP addresses
-
- netmask = '255.255.255.0' # set netmask to what's being used in your environment. The example uses a /24
-
- for ip in sys.argv: # loop over list of datanode IP's
- address = '{0}/{1}'.format(ip, netmask) # format address string so it looks like 'ip/netmask' to make netaddr work
- try:
- network_address = netaddr.IPNetwork(address).network # calculate and print network address
- print "/{0}".format(network_address)
- except:
- print "/rack-unknown" # print catch-all value if unable to calculate network address
-+-------------------------------+
-
-* {bash Example}
-
-+-------------------------------+
- #!/bin/bash
- # Here's a bash example to show just how simple these scripts can be
- # Assuming we have flat network with everything on a single switch, we can fake a rack topology.
- # This could occur in a lab environment where we have limited nodes,like 2-8 physical machines on a unmanaged switch.
- # This may also apply to multiple virtual machines running on the same physical hardware.
- # The number of machines isn't important, but that we are trying to fake a network topology when there isn't one.
- #
- # +----------+ +--------+
- # |jobtracker| |datanode|
- # +----------+ +--------+
- # \ /
- # +--------+ +--------+ +--------+
- # |datanode|--| switch |--|datanode|
- # +--------+ +--------+ +--------+
- # / \
- # +--------+ +--------+
- # |datanode| |namenode|
- # +--------+ +--------+
- #
- # With this network topology, we are treating each host as a rack. This is being done by taking the last octet
- # in the datanode's IP and prepending it with the word '/rack-'. The advantage for doing this is so HDFS
- # can create its 'off-rack' block copy.
- # 1) 'echo $@' will echo all ARGV values to xargs.
- # 2) 'xargs' will enforce that we print a single argv value per line
- # 3) 'awk' will split fields on dots and append the last field to the string '/rack-'. If awk
- # fails to split on four dots, it will still print '/rack-' last field value
-
- echo $@ | xargs -n 1 | awk -F '.' '{print "/rack-"$NF}'
-+-------------------------------+
-
[4/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Posted by aw...@apache.org.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/SecureMode.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/SecureMode.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/SecureMode.apt.vm
deleted file mode 100644
index 0235219..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/SecureMode.apt.vm
+++ /dev/null
@@ -1,689 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop in Secure Mode
- ---
- ---
- ${maven.build.timestamp}
-
-%{toc|section=0|fromDepth=0|toDepth=3}
-
-Hadoop in Secure Mode
-
-* Introduction
-
- This document describes how to configure authentication for Hadoop in
- secure mode.
-
- By default Hadoop runs in non-secure mode in which no actual
- authentication is required.
- By configuring Hadoop runs in secure mode,
- each user and service needs to be authenticated by Kerberos
- in order to use Hadoop services.
-
- Security features of Hadoop consist of
- {{{Authentication}authentication}},
- {{{./ServiceLevelAuth.html}service level authorization}},
- {{{./HttpAuthentication.html}authentication for Web consoles}}
- and {{{Data confidentiality}data confidenciality}}.
-
-
-* Authentication
-
-** End User Accounts
-
- When service level authentication is turned on,
- end users using Hadoop in secure mode needs to be authenticated by Kerberos.
- The simplest way to do authentication is using <<<kinit>>> command of Kerberos.
-
-** User Accounts for Hadoop Daemons
-
- Ensure that HDFS and YARN daemons run as different Unix users,
- e.g. <<<hdfs>>> and <<<yarn>>>.
- Also, ensure that the MapReduce JobHistory server runs as
- different user such as <<<mapred>>>.
-
- It's recommended to have them share a Unix group, for e.g. <<<hadoop>>>.
- See also "{{Mapping from user to group}}" for group management.
-
-*---------------+----------------------------------------------------------------------+
-|| User:Group || Daemons |
-*---------------+----------------------------------------------------------------------+
-| hdfs:hadoop | NameNode, Secondary NameNode, JournalNode, DataNode |
-*---------------+----------------------------------------------------------------------+
-| yarn:hadoop | ResourceManager, NodeManager |
-*---------------+----------------------------------------------------------------------+
-| mapred:hadoop | MapReduce JobHistory Server |
-*---------------+----------------------------------------------------------------------+
-
-** Kerberos principals for Hadoop Daemons and Users
-
- For running hadoop service daemons in Hadoop in secure mode,
- Kerberos principals are required.
- Each service reads auhenticate information saved in keytab file with appropriate permission.
-
- HTTP web-consoles should be served by principal different from RPC's one.
-
- Subsections below shows the examples of credentials for Hadoop services.
-
-*** HDFS
-
- The NameNode keytab file, on the NameNode host, should look like the
- following:
-
-----
-$ klist -e -k -t /etc/security/keytab/nn.service.keytab
-Keytab name: FILE:/etc/security/keytab/nn.service.keytab
-KVNO Timestamp Principal
- 4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 nn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
-----
-
- The Secondary NameNode keytab file, on that host, should look like the
- following:
-
-----
-$ klist -e -k -t /etc/security/keytab/sn.service.keytab
-Keytab name: FILE:/etc/security/keytab/sn.service.keytab
-KVNO Timestamp Principal
- 4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 sn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
-----
-
- The DataNode keytab file, on each host, should look like the following:
-
-----
-$ klist -e -k -t /etc/security/keytab/dn.service.keytab
-Keytab name: FILE:/etc/security/keytab/dn.service.keytab
-KVNO Timestamp Principal
- 4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 dn/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
-----
-
-*** YARN
-
- The ResourceManager keytab file, on the ResourceManager host, should look
- like the following:
-
-----
-$ klist -e -k -t /etc/security/keytab/rm.service.keytab
-Keytab name: FILE:/etc/security/keytab/rm.service.keytab
-KVNO Timestamp Principal
- 4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 rm/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
-----
-
- The NodeManager keytab file, on each host, should look like the following:
-
-----
-$ klist -e -k -t /etc/security/keytab/nm.service.keytab
-Keytab name: FILE:/etc/security/keytab/nm.service.keytab
-KVNO Timestamp Principal
- 4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 nm/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
-----
-
-*** MapReduce JobHistory Server
-
- The MapReduce JobHistory Server keytab file, on that host, should look
- like the following:
-
-----
-$ klist -e -k -t /etc/security/keytab/jhs.service.keytab
-Keytab name: FILE:/etc/security/keytab/jhs.service.keytab
-KVNO Timestamp Principal
- 4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 jhs/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-256 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (AES-128 CTS mode with 96-bit SHA-1 HMAC)
- 4 07/18/11 21:08:09 host/full.qualified.domain.name@REALM.TLD (ArcFour with HMAC/md5)
-----
-
-** Mapping from Kerberos principal to OS user account
-
- Hadoop maps Kerberos principal to OS user account using
- the rule specified by <<<hadoop.security.auth_to_local>>>
- which works in the same way as the <<<auth_to_local>>> in
- {{{http://web.mit.edu/Kerberos/krb5-latest/doc/admin/conf_files/krb5_conf.html}Kerberos configuration file (krb5.conf)}}.
- In addition, Hadoop <<<auth_to_local>>> mapping supports the <</L>> flag that
- lowercases the returned name.
-
- By default, it picks the first component of principal name as a user name
- if the realms matches to the <<<default_realm>>> (usually defined in /etc/krb5.conf).
- For example, <<<...@REALM.TLD>>> is mapped to <<<host>>>
- by default rule.
-
-** Mapping from user to group
-
- Though files on HDFS are associated to owner and group,
- Hadoop does not have the definition of group by itself.
- Mapping from user to group is done by OS or LDAP.
-
- You can change a way of mapping by
- specifying the name of mapping provider as a value of
- <<<hadoop.security.group.mapping>>>
- See {{{../hadoop-hdfs/HdfsPermissionsGuide.html}HDFS Permissions Guide}} for details.
-
- Practically you need to manage SSO environment using Kerberos with LDAP
- for Hadoop in secure mode.
-
-** Proxy user
-
- Some products such as Apache Oozie which access the services of Hadoop
- on behalf of end users need to be able to impersonate end users.
- See {{{./Superusers.html}the doc of proxy user}} for details.
-
-** Secure DataNode
-
- Because the data transfer protocol of DataNode
- does not use the RPC framework of Hadoop,
- DataNode must authenticate itself by
- using privileged ports which are specified by
- <<<dfs.datanode.address>>> and <<<dfs.datanode.http.address>>>.
- This authentication is based on the assumption
- that the attacker won't be able to get root privileges.
-
- When you execute <<<hdfs datanode>>> command as root,
- server process binds privileged port at first,
- then drops privilege and runs as the user account specified by
- <<<HADOOP_SECURE_DN_USER>>>.
- This startup process uses jsvc installed to <<<JSVC_HOME>>>.
- You must specify <<<HADOOP_SECURE_DN_USER>>> and <<<JSVC_HOME>>>
- as environment variables on start up (in hadoop-env.sh).
-
- As of version 2.6.0, SASL can be used to authenticate the data transfer
- protocol. In this configuration, it is no longer required for secured clusters
- to start the DataNode as root using jsvc and bind to privileged ports. To
- enable SASL on data transfer protocol, set <<<dfs.data.transfer.protection>>>
- in hdfs-site.xml, set a non-privileged port for <<<dfs.datanode.address>>>, set
- <<<dfs.http.policy>>> to <HTTPS_ONLY> and make sure the
- <<<HADOOP_SECURE_DN_USER>>> environment variable is not defined. Note that it
- is not possible to use SASL on data transfer protocol if
- <<<dfs.datanode.address>>> is set to a privileged port. This is required for
- backwards-compatibility reasons.
-
- In order to migrate an existing cluster that used root authentication to start
- using SASL instead, first ensure that version 2.6.0 or later has been deployed
- to all cluster nodes as well as any external applications that need to connect
- to the cluster. Only versions 2.6.0 and later of the HDFS client can connect
- to a DataNode that uses SASL for authentication of data transfer protocol, so
- it is vital that all callers have the correct version before migrating. After
- version 2.6.0 or later has been deployed everywhere, update configuration of
- any external applications to enable SASL. If an HDFS client is enabled for
- SASL, then it can connect successfully to a DataNode running with either root
- authentication or SASL authentication. Changing configuration for all clients
- guarantees that subsequent configuration changes on DataNodes will not disrupt
- the applications. Finally, each individual DataNode can be migrated by
- changing its configuration and restarting. It is acceptable to have a mix of
- some DataNodes running with root authentication and some DataNodes running with
- SASL authentication temporarily during this migration period, because an HDFS
- client enabled for SASL can connect to both.
-
-* Data confidentiality
-
-** Data Encryption on RPC
-
- The data transfered between hadoop services and clients.
- Setting <<<hadoop.rpc.protection>>> to <<<"privacy">>> in the core-site.xml
- activate data encryption.
-
-** Data Encryption on Block data transfer.
-
- You need to set <<<dfs.encrypt.data.transfer>>> to <<<"true">>> in the hdfs-site.xml
- in order to activate data encryption for data transfer protocol of DataNode.
-
- Optionally, you may set <<<dfs.encrypt.data.transfer.algorithm>>> to either
- "3des" or "rc4" to choose the specific encryption algorithm. If unspecified,
- then the configured JCE default on the system is used, which is usually 3DES.
-
- Setting <<<dfs.encrypt.data.transfer.cipher.suites>>> to
- <<<AES/CTR/NoPadding>>> activates AES encryption. By default, this is
- unspecified, so AES is not used. When AES is used, the algorithm specified in
- <<<dfs.encrypt.data.transfer.algorithm>>> is still used during an initial key
- exchange. The AES key bit length can be configured by setting
- <<<dfs.encrypt.data.transfer.cipher.key.bitlength>>> to 128, 192 or 256. The
- default is 128.
-
- AES offers the greatest cryptographic strength and the best performance. At
- this time, 3DES and RC4 have been used more often in Hadoop clusters.
-
-** Data Encryption on HTTP
-
- Data transfer between Web-console and clients are protected by using SSL(HTTPS).
-
-
-* Configuration
-
-** Permissions for both HDFS and local fileSystem paths
-
- The following table lists various paths on HDFS and local filesystems (on
- all nodes) and recommended permissions:
-
-*-------------------+-------------------+------------------+------------------+
-|| Filesystem || Path || User:Group || Permissions |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<dfs.namenode.name.dir>>> | hdfs:hadoop | drwx------ |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<dfs.datanode.data.dir>>> | hdfs:hadoop | drwx------ |
-*-------------------+-------------------+------------------+------------------+
-| local | $HADOOP_LOG_DIR | hdfs:hadoop | drwxrwxr-x |
-*-------------------+-------------------+------------------+------------------+
-| local | $YARN_LOG_DIR | yarn:hadoop | drwxrwxr-x |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<yarn.nodemanager.local-dirs>>> | yarn:hadoop | drwxr-xr-x |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<yarn.nodemanager.log-dirs>>> | yarn:hadoop | drwxr-xr-x |
-*-------------------+-------------------+------------------+------------------+
-| local | container-executor | root:hadoop | --Sr-s--- |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<conf/container-executor.cfg>>> | root:hadoop | r-------- |
-*-------------------+-------------------+------------------+------------------+
-| hdfs | / | hdfs:hadoop | drwxr-xr-x |
-*-------------------+-------------------+------------------+------------------+
-| hdfs | /tmp | hdfs:hadoop | drwxrwxrwxt |
-*-------------------+-------------------+------------------+------------------+
-| hdfs | /user | hdfs:hadoop | drwxr-xr-x |
-*-------------------+-------------------+------------------+------------------+
-| hdfs | <<<yarn.nodemanager.remote-app-log-dir>>> | yarn:hadoop | drwxrwxrwxt |
-*-------------------+-------------------+------------------+------------------+
-| hdfs | <<<mapreduce.jobhistory.intermediate-done-dir>>> | mapred:hadoop | |
-| | | | drwxrwxrwxt |
-*-------------------+-------------------+------------------+------------------+
-| hdfs | <<<mapreduce.jobhistory.done-dir>>> | mapred:hadoop | |
-| | | | drwxr-x--- |
-*-------------------+-------------------+------------------+------------------+
-
-** Common Configurations
-
- In order to turn on RPC authentication in hadoop,
- set the value of <<<hadoop.security.authentication>>> property to
- <<<"kerberos">>>, and set security related settings listed below appropriately.
-
- The following properties should be in the <<<core-site.xml>>> of all the
- nodes in the cluster.
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<hadoop.security.authentication>>> | <kerberos> | |
-| | | <<<simple>>> : No authentication. (default) \
-| | | <<<kerberos>>> : Enable authentication by Kerberos. |
-*-------------------------+-------------------------+------------------------+
-| <<<hadoop.security.authorization>>> | <true> | |
-| | | Enable {{{./ServiceLevelAuth.html}RPC service-level authorization}}. |
-*-------------------------+-------------------------+------------------------+
-| <<<hadoop.rpc.protection>>> | <authentication> |
-| | | <authentication> : authentication only (default) \
-| | | <integrity> : integrity check in addition to authentication \
-| | | <privacy> : data encryption in addition to integrity |
-*-------------------------+-------------------------+------------------------+
-| <<<hadoop.security.auth_to_local>>> | | |
-| | <<<RULE:>>><exp1>\
-| | <<<RULE:>>><exp2>\
-| | <...>\
-| | DEFAULT |
-| | | The value is string containing new line characters.
-| | | See
-| | | {{{http://web.mit.edu/Kerberos/krb5-latest/doc/admin/conf_files/krb5_conf.html}Kerberos documentation}}
-| | | for format for <exp>.
-*-------------------------+-------------------------+------------------------+
-| <<<hadoop.proxyuser.>>><superuser><<<.hosts>>> | | |
-| | | comma separated hosts from which <superuser> access are allowd to impersonation. |
-| | | <<<*>>> means wildcard. |
-*-------------------------+-------------------------+------------------------+
-| <<<hadoop.proxyuser.>>><superuser><<<.groups>>> | | |
-| | | comma separated groups to which users impersonated by <superuser> belongs. |
-| | | <<<*>>> means wildcard. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/core-site.xml>>>
-
-** NameNode
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.block.access.token.enable>>> | <true> | |
-| | | Enable HDFS block access tokens for secure operations. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.https.enable>>> | <true> | |
-| | | This value is deprecated. Use dfs.http.policy |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.http.policy>>> | <HTTP_ONLY> or <HTTPS_ONLY> or <HTTP_AND_HTTPS> | |
-| | | HTTPS_ONLY turns off http access. This option takes precedence over |
-| | | the deprecated configuration dfs.https.enable and hadoop.ssl.enabled. |
-| | | If using SASL to authenticate data transfer protocol instead of |
-| | | running DataNode as root and using privileged ports, then this property |
-| | | must be set to <HTTPS_ONLY> to guarantee authentication of HTTP servers. |
-| | | (See <<<dfs.data.transfer.protection>>>.) |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.https-address>>> | <nn_host_fqdn:50470> | |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.https.port>>> | <50470> | |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.keytab.file>>> | </etc/security/keytab/nn.service.keytab> | |
-| | | Kerberos keytab file for the NameNode. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.kerberos.principal>>> | nn/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the NameNode. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.kerberos.internal.spnego.principal>>> | HTTP/_HOST@REALM.TLD | |
-| | | HTTP Kerberos principal name for the NameNode. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/hdfs-site.xml>>>
-
-** Secondary NameNode
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.secondary.http-address>>> | <c_nn_host_fqdn:50090> | |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.secondary.https-port>>> | <50470> | |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.secondary.namenode.keytab.file>>> | | |
-| | </etc/security/keytab/sn.service.keytab> | |
-| | | Kerberos keytab file for the Secondary NameNode. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.secondary.namenode.kerberos.principal>>> | sn/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the Secondary NameNode. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.secondary.namenode.kerberos.internal.spnego.principal>>> | | |
-| | HTTP/_HOST@REALM.TLD | |
-| | | HTTP Kerberos principal name for the Secondary NameNode. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/hdfs-site.xml>>>
-
-** DataNode
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.data.dir.perm>>> | 700 | |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.address>>> | <0.0.0.0:1004> | |
-| | | Secure DataNode must use privileged port |
-| | | in order to assure that the server was started securely. |
-| | | This means that the server must be started via jsvc. |
-| | | Alternatively, this must be set to a non-privileged port if using SASL |
-| | | to authenticate data transfer protocol. |
-| | | (See <<<dfs.data.transfer.protection>>>.) |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.http.address>>> | <0.0.0.0:1006> | |
-| | | Secure DataNode must use privileged port |
-| | | in order to assure that the server was started securely. |
-| | | This means that the server must be started via jsvc. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.https.address>>> | <0.0.0.0:50470> | |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.keytab.file>>> | </etc/security/keytab/dn.service.keytab> | |
-| | | Kerberos keytab file for the DataNode. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.kerberos.principal>>> | dn/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the DataNode. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.encrypt.data.transfer>>> | <false> | |
-| | | set to <<<true>>> when using data encryption |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.encrypt.data.transfer.algorithm>>> | | |
-| | | optionally set to <<<3des>>> or <<<rc4>>> when using data encryption to |
-| | | control encryption algorithm |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.encrypt.data.transfer.cipher.suites>>> | | |
-| | | optionally set to <<<AES/CTR/NoPadding>>> to activate AES encryption |
-| | | when using data encryption |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.encrypt.data.transfer.cipher.key.bitlength>>> | | |
-| | | optionally set to <<<128>>>, <<<192>>> or <<<256>>> to control key bit |
-| | | length when using AES with data encryption |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.data.transfer.protection>>> | | |
-| | | <authentication> : authentication only \
-| | | <integrity> : integrity check in addition to authentication \
-| | | <privacy> : data encryption in addition to integrity |
-| | | This property is unspecified by default. Setting this property enables |
-| | | SASL for authentication of data transfer protocol. If this is enabled, |
-| | | then <<<dfs.datanode.address>>> must use a non-privileged port, |
-| | | <<<dfs.http.policy>>> must be set to <HTTPS_ONLY> and the |
-| | | <<<HADOOP_SECURE_DN_USER>>> environment variable must be undefined when |
-| | | starting the DataNode process. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/hdfs-site.xml>>>
-
-
-** WebHDFS
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.web.authentication.kerberos.principal>>> | http/_HOST@REALM.TLD | |
-| | | Kerberos keytab file for the WebHDFS. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.web.authentication.kerberos.keytab>>> | </etc/security/keytab/http.service.keytab> | |
-| | | Kerberos principal name for WebHDFS. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/hdfs-site.xml>>>
-
-
-** ResourceManager
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.keytab>>> | | |
-| | </etc/security/keytab/rm.service.keytab> | |
-| | | Kerberos keytab file for the ResourceManager. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.principal>>> | rm/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the ResourceManager. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/yarn-site.xml>>>
-
-** NodeManager
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.keytab>>> | </etc/security/keytab/nm.service.keytab> | |
-| | | Kerberos keytab file for the NodeManager. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.principal>>> | nm/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the NodeManager. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.container-executor.class>>> | | |
-| | <<<org.apache.hadoop.yarn.server.nodemanager.LinuxContainerExecutor>>> |
-| | | Use LinuxContainerExecutor. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.linux-container-executor.group>>> | <hadoop> | |
-| | | Unix group of the NodeManager. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.linux-container-executor.path>>> | </path/to/bin/container-executor> | |
-| | | The path to the executable of Linux container executor. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/yarn-site.xml>>>
-
-** Configuration for WebAppProxy
-
- The <<<WebAppProxy>>> provides a proxy between the web applications
- exported by an application and an end user. If security is enabled
- it will warn users before accessing a potentially unsafe web application.
- Authentication and authorization using the proxy is handled just like
- any other privileged web application.
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.web-proxy.address>>> | | |
-| | <<<WebAppProxy>>> host:port for proxy to AM web apps. | |
-| | | <host:port> if this is the same as <<<yarn.resourcemanager.webapp.address>>>|
-| | | or it is not defined then the <<<ResourceManager>>> will run the proxy|
-| | | otherwise a standalone proxy server will need to be launched.|
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.web-proxy.keytab>>> | | |
-| | </etc/security/keytab/web-app.service.keytab> | |
-| | | Kerberos keytab file for the WebAppProxy. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.web-proxy.principal>>> | wap/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the WebAppProxy. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/yarn-site.xml>>>
-
-** LinuxContainerExecutor
-
- A <<<ContainerExecutor>>> used by YARN framework which define how any
- <container> launched and controlled.
-
- The following are the available in Hadoop YARN:
-
-*--------------------------------------+--------------------------------------+
-|| ContainerExecutor || Description |
-*--------------------------------------+--------------------------------------+
-| <<<DefaultContainerExecutor>>> | |
-| | The default executor which YARN uses to manage container execution. |
-| | The container process has the same Unix user as the NodeManager. |
-*--------------------------------------+--------------------------------------+
-| <<<LinuxContainerExecutor>>> | |
-| | Supported only on GNU/Linux, this executor runs the containers as either the |
-| | YARN user who submitted the application (when full security is enabled) or |
-| | as a dedicated user (defaults to nobody) when full security is not enabled. |
-| | When full security is enabled, this executor requires all user accounts to be |
-| | created on the cluster nodes where the containers are launched. It uses |
-| | a <setuid> executable that is included in the Hadoop distribution. |
-| | The NodeManager uses this executable to launch and kill containers. |
-| | The setuid executable switches to the user who has submitted the |
-| | application and launches or kills the containers. For maximum security, |
-| | this executor sets up restricted permissions and user/group ownership of |
-| | local files and directories used by the containers such as the shared |
-| | objects, jars, intermediate files, log files etc. Particularly note that, |
-| | because of this, except the application owner and NodeManager, no other |
-| | user can access any of the local files/directories including those |
-| | localized as part of the distributed cache. |
-*--------------------------------------+--------------------------------------+
-
- To build the LinuxContainerExecutor executable run:
-
-----
- $ mvn package -Dcontainer-executor.conf.dir=/etc/hadoop/
-----
-
- The path passed in <<<-Dcontainer-executor.conf.dir>>> should be the
- path on the cluster nodes where a configuration file for the setuid
- executable should be located. The executable should be installed in
- $HADOOP_YARN_HOME/bin.
-
- The executable must have specific permissions: 6050 or --Sr-s---
- permissions user-owned by <root> (super-user) and group-owned by a
- special group (e.g. <<<hadoop>>>) of which the NodeManager Unix user is
- the group member and no ordinary application user is. If any application
- user belongs to this special group, security will be compromised. This
- special group name should be specified for the configuration property
- <<<yarn.nodemanager.linux-container-executor.group>>> in both
- <<<conf/yarn-site.xml>>> and <<<conf/container-executor.cfg>>>.
-
- For example, let's say that the NodeManager is run as user <yarn> who is
- part of the groups users and <hadoop>, any of them being the primary group.
- Let also be that <users> has both <yarn> and another user
- (application submitter) <alice> as its members, and <alice> does not
- belong to <hadoop>. Going by the above description, the setuid/setgid
- executable should be set 6050 or --Sr-s--- with user-owner as <yarn> and
- group-owner as <hadoop> which has <yarn> as its member (and not <users>
- which has <alice> also as its member besides <yarn>).
-
- The LinuxTaskController requires that paths including and leading up to
- the directories specified in <<<yarn.nodemanager.local-dirs>>> and
- <<<yarn.nodemanager.log-dirs>>> to be set 755 permissions as described
- above in the table on permissions on directories.
-
- * <<<conf/container-executor.cfg>>>
-
- The executable requires a configuration file called
- <<<container-executor.cfg>>> to be present in the configuration
- directory passed to the mvn target mentioned above.
-
- The configuration file must be owned by the user running NodeManager
- (user <<<yarn>>> in the above example), group-owned by anyone and
- should have the permissions 0400 or r--------.
-
- The executable requires following configuration items to be present
- in the <<<conf/container-executor.cfg>>> file. The items should be
- mentioned as simple key=value pairs, one per-line:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.linux-container-executor.group>>> | <hadoop> | |
-| | | Unix group of the NodeManager. The group owner of the |
-| | |<container-executor> binary should be this group. Should be same as the |
-| | | value with which the NodeManager is configured. This configuration is |
-| | | required for validating the secure access of the <container-executor> |
-| | | binary. |
-*-------------------------+-------------------------+------------------------+
-| <<<banned.users>>> | hdfs,yarn,mapred,bin | Banned users. |
-*-------------------------+-------------------------+------------------------+
-| <<<allowed.system.users>>> | foo,bar | Allowed system users. |
-*-------------------------+-------------------------+------------------------+
-| <<<min.user.id>>> | 1000 | Prevent other super-users. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/yarn-site.xml>>>
-
- To re-cap, here are the local file-sysytem permissions required for the
- various paths related to the <<<LinuxContainerExecutor>>>:
-
-*-------------------+-------------------+------------------+------------------+
-|| Filesystem || Path || User:Group || Permissions |
-*-------------------+-------------------+------------------+------------------+
-| local | container-executor | root:hadoop | --Sr-s--- |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<conf/container-executor.cfg>>> | root:hadoop | r-------- |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<yarn.nodemanager.local-dirs>>> | yarn:hadoop | drwxr-xr-x |
-*-------------------+-------------------+------------------+------------------+
-| local | <<<yarn.nodemanager.log-dirs>>> | yarn:hadoop | drwxr-xr-x |
-*-------------------+-------------------+------------------+------------------+
-
-** MapReduce JobHistory Server
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.address>>> | | |
-| | MapReduce JobHistory Server <host:port> | Default port is 10020. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.keytab>>> | |
-| | </etc/security/keytab/jhs.service.keytab> | |
-| | | Kerberos keytab file for the MapReduce JobHistory Server. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.principal>>> | jhs/_HOST@REALM.TLD | |
-| | | Kerberos principal name for the MapReduce JobHistory Server. |
-*-------------------------+-------------------------+------------------------+
-Configuration for <<<conf/mapred-site.xml>>>
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/ServiceLevelAuth.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/ServiceLevelAuth.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/ServiceLevelAuth.apt.vm
deleted file mode 100644
index 86fb3d6..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/ServiceLevelAuth.apt.vm
+++ /dev/null
@@ -1,216 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Service Level Authorization Guide
- ---
- ---
- ${maven.build.timestamp}
-
-Service Level Authorization Guide
-
-%{toc|section=1|fromDepth=0}
-
-* Purpose
-
- This document describes how to configure and manage Service Level
- Authorization for Hadoop.
-
-* Prerequisites
-
- Make sure Hadoop is installed, configured and setup correctly. For more
- information see:
-
- * {{{./SingleCluster.html}Single Node Setup}} for first-time users.
-
- * {{{./ClusterSetup.html}Cluster Setup}} for large, distributed clusters.
-
-* Overview
-
- Service Level Authorization is the initial authorization mechanism to
- ensure clients connecting to a particular Hadoop service have the
- necessary, pre-configured, permissions and are authorized to access the
- given service. For example, a MapReduce cluster can use this mechanism
- to allow a configured list of users/groups to submit jobs.
-
- The <<<${HADOOP_CONF_DIR}/hadoop-policy.xml>>> configuration file is used to
- define the access control lists for various Hadoop services.
-
- Service Level Authorization is performed much before to other access
- control checks such as file-permission checks, access control on job
- queues etc.
-
-* Configuration
-
- This section describes how to configure service-level authorization via
- the configuration file <<<${HADOOP_CONF_DIR}/hadoop-policy.xml>>>.
-
-** Enable Service Level Authorization
-
- By default, service-level authorization is disabled for Hadoop. To
- enable it set the configuration property hadoop.security.authorization
- to true in <<<${HADOOP_CONF_DIR}/core-site.xml>>>.
-
-** Hadoop Services and Configuration Properties
-
- This section lists the various Hadoop services and their configuration
- knobs:
-
-*-------------------------------------+--------------------------------------+
-|| Property || Service
-*-------------------------------------+--------------------------------------+
-security.client.protocol.acl | ACL for ClientProtocol, which is used by user code via the DistributedFileSystem.
-*-------------------------------------+--------------------------------------+
-security.client.datanode.protocol.acl | ACL for ClientDatanodeProtocol, the client-to-datanode protocol for block recovery.
-*-------------------------------------+--------------------------------------+
-security.datanode.protocol.acl | ACL for DatanodeProtocol, which is used by datanodes to communicate with the namenode.
-*-------------------------------------+--------------------------------------+
-security.inter.datanode.protocol.acl | ACL for InterDatanodeProtocol, the inter-datanode protocol for updating generation timestamp.
-*-------------------------------------+--------------------------------------+
-security.namenode.protocol.acl | ACL for NamenodeProtocol, the protocol used by the secondary namenode to communicate with the namenode.
-*-------------------------------------+--------------------------------------+
-security.inter.tracker.protocol.acl | ACL for InterTrackerProtocol, used by the tasktrackers to communicate with the jobtracker.
-*-------------------------------------+--------------------------------------+
-security.job.submission.protocol.acl | ACL for JobSubmissionProtocol, used by job clients to communciate with the jobtracker for job submission, querying job status etc.
-*-------------------------------------+--------------------------------------+
-security.task.umbilical.protocol.acl | ACL for TaskUmbilicalProtocol, used by the map and reduce tasks to communicate with the parent tasktracker.
-*-------------------------------------+--------------------------------------+
-security.refresh.policy.protocol.acl | ACL for RefreshAuthorizationPolicyProtocol, used by the dfsadmin and mradmin commands to refresh the security policy in-effect.
-*-------------------------------------+--------------------------------------+
-security.ha.service.protocol.acl | ACL for HAService protocol used by HAAdmin to manage the active and stand-by states of namenode.
-*-------------------------------------+--------------------------------------+
-
-** Access Control Lists
-
- <<<${HADOOP_CONF_DIR}/hadoop-policy.xml>>> defines an access control list for
- each Hadoop service. Every access control list has a simple format:
-
- The list of users and groups are both comma separated list of names.
- The two lists are separated by a space.
-
- Example: <<<user1,user2 group1,group2>>>.
-
- Add a blank at the beginning of the line if only a list of groups is to
- be provided, equivalently a comma-separated list of users followed by
- a space or nothing implies only a set of given users.
-
- A special value of <<<*>>> implies that all users are allowed to access the
- service.
-
- If access control list is not defined for a service, the value of
- <<<security.service.authorization.default.acl>>> is applied. If
- <<<security.service.authorization.default.acl>>> is not defined, <<<*>>> is applied.
-
- ** Blocked Access Control Lists
-
- In some cases, it is required to specify blocked access control list for a service. This specifies
- the list of users and groups who are not authorized to access the service. The format of
- the blocked access control list is same as that of access control list. The blocked access
- control list can be specified via <<<${HADOOP_CONF_DIR}/hadoop-policy.xml>>>. The property name
- is derived by suffixing with ".blocked".
-
- Example: The property name of blocked access control list for <<<security.client.protocol.acl>>
- will be <<<security.client.protocol.acl.blocked>>>
-
- For a service, it is possible to specify both an access control list and a blocked control
- list. A user is authorized to access the service if the user is in the access control and not in
- the blocked access control list.
-
- If blocked access control list is not defined for a service, the value of
- <<<security.service.authorization.default.acl.blocked>>> is applied. If
- <<<security.service.authorization.default.acl.blocked>>> is not defined,
- empty blocked access control list is applied.
-
-
-** Refreshing Service Level Authorization Configuration
-
- The service-level authorization configuration for the NameNode and
- JobTracker can be changed without restarting either of the Hadoop
- master daemons. The cluster administrator can change
- <<<${HADOOP_CONF_DIR}/hadoop-policy.xml>>> on the master nodes and instruct
- the NameNode and JobTracker to reload their respective configurations
- via the <<<-refreshServiceAcl>>> switch to <<<dfsadmin>>> and <<<mradmin>>> commands
- respectively.
-
- Refresh the service-level authorization configuration for the NameNode:
-
-----
- $ bin/hadoop dfsadmin -refreshServiceAcl
-----
-
- Refresh the service-level authorization configuration for the
- JobTracker:
-
-----
- $ bin/hadoop mradmin -refreshServiceAcl
-----
-
- Of course, one can use the <<<security.refresh.policy.protocol.acl>>>
- property in <<<${HADOOP_CONF_DIR}/hadoop-policy.xml>>> to restrict access to
- the ability to refresh the service-level authorization configuration to
- certain users/groups.
-
- ** Access Control using list of ip addresses, host names and ip ranges
-
- Access to a service can be controlled based on the ip address of the client accessing
- the service. It is possible to restrict access to a service from a set of machines by
- specifying a list of ip addresses, host names and ip ranges. The property name for each service
- is derived from the corresponding acl's property name. If the property name of acl is
- security.client.protocol.acl, property name for the hosts list will be
- security.client.protocol.hosts.
-
- If hosts list is not defined for a service, the value of
- <<<security.service.authorization.default.hosts>>> is applied. If
- <<<security.service.authorization.default.hosts>>> is not defined, <<<*>>> is applied.
-
- It is possible to specify a blocked list of hosts. Only those machines which are in the
- hosts list, but not in the blocked hosts list will be granted access to the service. The property
- name is derived by suffixing with ".blocked".
-
- Example: The property name of blocked hosts list for <<<security.client.protocol.hosts>>
- will be <<<security.client.protocol.hosts.blocked>>>
-
- If blocked hosts list is not defined for a service, the value of
- <<<security.service.authorization.default.hosts.blocked>>> is applied. If
- <<<security.service.authorization.default.hosts.blocked>>> is not defined,
- empty blocked hosts list is applied.
-
-** Examples
-
- Allow only users <<<alice>>>, <<<bob>>> and users in the <<<mapreduce>>> group to submit
- jobs to the MapReduce cluster:
-
-----
-<property>
- <name>security.job.submission.protocol.acl</name>
- <value>alice,bob mapreduce</value>
-</property>
-----
-
- Allow only DataNodes running as the users who belong to the group
- datanodes to communicate with the NameNode:
-
-----
-<property>
- <name>security.datanode.protocol.acl</name>
- <value>datanodes</value>
-</property>
-----
-
- Allow any user to talk to the HDFS cluster as a DFSClient:
-
-----
-<property>
- <name>security.client.protocol.acl</name>
- <value>*</value>
-</property>
-----
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/SingleCluster.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/SingleCluster.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/SingleCluster.apt.vm
deleted file mode 100644
index eb9c88a..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/SingleCluster.apt.vm
+++ /dev/null
@@ -1,286 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop ${project.version} - Setting up a Single Node Cluster.
- ---
- ---
- ${maven.build.timestamp}
-
-Hadoop - Setting up a Single Node Cluster.
-
-%{toc|section=1|fromDepth=0}
-
-* Purpose
-
- This document describes how to set up and configure a single-node Hadoop
- installation so that you can quickly perform simple operations using Hadoop
- MapReduce and the Hadoop Distributed File System (HDFS).
-
-* Prerequisites
-
-** Supported Platforms
-
- * GNU/Linux is supported as a development and production platform.
- Hadoop has been demonstrated on GNU/Linux clusters with 2000 nodes.
-
- * Windows is also a supported platform but the followings steps
- are for Linux only. To set up Hadoop on Windows, see
- {{{http://wiki.apache.org/hadoop/Hadoop2OnWindows}wiki page}}.
-
-** Required Software
-
- Required software for Linux include:
-
- [[1]] Java\u2122 must be installed. Recommended Java versions are described
- at {{{http://wiki.apache.org/hadoop/HadoopJavaVersions}
- HadoopJavaVersions}}.
-
- [[2]] ssh must be installed and sshd must be running to use the Hadoop
- scripts that manage remote Hadoop daemons if the optional start
- and stop scripts are to be used. Additionally, it is recommmended that
- pdsh also be installed for better ssh resource management.
-
-** Installing Software
-
- If your cluster doesn't have the requisite software you will need to install
- it.
-
- For example on Ubuntu Linux:
-
-----
- $ sudo apt-get install ssh
- $ sudo apt-get install pdsh
-----
-
-* Download
-
- To get a Hadoop distribution, download a recent stable release from one of
- the {{{http://www.apache.org/dyn/closer.cgi/hadoop/common/}
- Apache Download Mirrors}}.
-
-* Prepare to Start the Hadoop Cluster
-
- Unpack the downloaded Hadoop distribution. In the distribution, edit
- the file <<<etc/hadoop/hadoop-env.sh>>> to define some parameters as
- follows:
-
-----
- # set to the root of your Java installation
- export JAVA_HOME=/usr/java/latest
-----
-
- Try the following command:
-
-----
- $ bin/hadoop
-----
-
- This will display the usage documentation for the hadoop script.
-
- Now you are ready to start your Hadoop cluster in one of the three supported
- modes:
-
- * {{{Standalone Operation}Local (Standalone) Mode}}
-
- * {{{Pseudo-Distributed Operation}Pseudo-Distributed Mode}}
-
- * {{{Fully-Distributed Operation}Fully-Distributed Mode}}
-
-* Standalone Operation
-
- By default, Hadoop is configured to run in a non-distributed mode, as a
- single Java process. This is useful for debugging.
-
- The following example copies the unpacked conf directory to use as input
- and then finds and displays every match of the given regular expression.
- Output is written to the given output directory.
-
-----
- $ mkdir input
- $ cp etc/hadoop/*.xml input
- $ bin/hadoop jar share/hadoop/mapreduce/hadoop-mapreduce-examples-${project.version}.jar grep input output 'dfs[a-z.]+'
- $ cat output/*
-----
-
-* Pseudo-Distributed Operation
-
- Hadoop can also be run on a single-node in a pseudo-distributed mode where
- each Hadoop daemon runs in a separate Java process.
-
-** Configuration
-
- Use the following:
-
- etc/hadoop/core-site.xml:
-
-+---+
-<configuration>
- <property>
- <name>fs.defaultFS</name>
- <value>hdfs://localhost:9000</value>
- </property>
-</configuration>
-+---+
-
- etc/hadoop/hdfs-site.xml:
-
-+---+
-<configuration>
- <property>
- <name>dfs.replication</name>
- <value>1</value>
- </property>
-</configuration>
-+---+
-
-** Setup passphraseless ssh
-
- Now check that you can ssh to the localhost without a passphrase:
-
-----
- $ ssh localhost
-----
-
- If you cannot ssh to localhost without a passphrase, execute the
- following commands:
-
-----
- $ ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa
- $ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
- $ chmod 0700 ~/.ssh/authorized_keys
-----
-
-** Execution
-
- The following instructions are to run a MapReduce job locally.
- If you want to execute a job on YARN, see {{YARN on Single Node}}.
-
- [[1]] Format the filesystem:
-
-----
- $ bin/hdfs namenode -format
-----
-
- [[2]] Start NameNode daemon and DataNode daemon:
-
-----
- $ sbin/start-dfs.sh
-----
-
- The hadoop daemon log output is written to the <<<${HADOOP_LOG_DIR}>>>
- directory (defaults to <<<${HADOOP_HOME}/logs>>>).
-
- [[3]] Browse the web interface for the NameNode; by default it is
- available at:
-
- * NameNode - <<<http://localhost:50070/>>>
-
- [[4]] Make the HDFS directories required to execute MapReduce jobs:
-
-----
- $ bin/hdfs dfs -mkdir /user
- $ bin/hdfs dfs -mkdir /user/<username>
-----
-
- [[5]] Copy the input files into the distributed filesystem:
-
-----
- $ bin/hdfs dfs -put etc/hadoop input
-----
-
- [[6]] Run some of the examples provided:
-
-----
- $ bin/hadoop jar share/hadoop/mapreduce/hadoop-mapreduce-examples-${project.version}.jar grep input output 'dfs[a-z.]+'
-----
-
- [[7]] Examine the output files:
-
- Copy the output files from the distributed filesystem to the local
- filesystem and examine them:
-
-----
- $ bin/hdfs dfs -get output output
- $ cat output/*
-----
-
- or
-
- View the output files on the distributed filesystem:
-
-----
- $ bin/hdfs dfs -cat output/*
-----
-
- [[8]] When you're done, stop the daemons with:
-
-----
- $ sbin/stop-dfs.sh
-----
-
-** YARN on a Single Node
-
- You can run a MapReduce job on YARN in a pseudo-distributed mode by setting
- a few parameters and running ResourceManager daemon and NodeManager daemon
- in addition.
-
- The following instructions assume that 1. ~ 4. steps of
- {{{Execution}the above instructions}} are already executed.
-
- [[1]] Configure parameters as follows:
-
- <<<etc/hadoop/mapred-site.xml>>>:
-
-+---+
-<configuration>
- <property>
- <name>mapreduce.framework.name</name>
- <value>yarn</value>
- </property>
-</configuration>
-+---+
-
- <<<etc/hadoop/yarn-site.xml>>>:
-
-+---+
-<configuration>
- <property>
- <name>yarn.nodemanager.aux-services</name>
- <value>mapreduce_shuffle</value>
- </property>
-</configuration>
-+---+
-
- [[2]] Start ResourceManager daemon and NodeManager daemon:
-
-----
- $ sbin/start-yarn.sh
-----
-
- [[3]] Browse the web interface for the ResourceManager; by default it is
- available at:
-
- * ResourceManager - <<<http://localhost:8088/>>>
-
- [[4]] Run a MapReduce job.
-
- [[5]] When you're done, stop the daemons with:
-
-----
- $ sbin/stop-yarn.sh
-----
-
-* Fully-Distributed Operation
-
- For information on setting up fully-distributed, non-trivial clusters
- see {{{./ClusterSetup.html}Cluster Setup}}.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/SingleNodeSetup.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/SingleNodeSetup.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/SingleNodeSetup.apt.vm
deleted file mode 100644
index eb0c801..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/SingleNodeSetup.apt.vm
+++ /dev/null
@@ -1,24 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Single Node Setup
- ---
- ---
- ${maven.build.timestamp}
-
-Single Node Setup
-
- This page will be removed in the next major release.
-
- See {{{./SingleCluster.html}Single Cluster Setup}} to set up and configure a
- single-node Hadoop installation.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/Superusers.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/Superusers.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/Superusers.apt.vm
deleted file mode 100644
index 78ed9a4..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/Superusers.apt.vm
+++ /dev/null
@@ -1,144 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Proxy user - Superusers Acting On Behalf Of Other Users
- ---
- ---
- ${maven.build.timestamp}
-
-Proxy user - Superusers Acting On Behalf Of Other Users
-
-%{toc|section=1|fromDepth=0}
-
-* Introduction
-
- This document describes how a superuser can submit jobs or access hdfs
- on behalf of another user.
-
-* Use Case
-
- The code example described in the next section is applicable for the
- following use case.
-
- A superuser with username 'super' wants to submit job and access hdfs
- on behalf of a user joe. The superuser has kerberos credentials but
- user joe doesn't have any. The tasks are required to run as user joe
- and any file accesses on namenode are required to be done as user joe.
- It is required that user joe can connect to the namenode or job tracker
- on a connection authenticated with super's kerberos credentials. In
- other words super is impersonating the user joe.
-
- Some products such as Apache Oozie need this.
-
-
-* Code example
-
- In this example super's credentials are used for login and a
- proxy user ugi object is created for joe. The operations are performed
- within the doAs method of this proxy user ugi object.
-
-----
- ...
- //Create ugi for joe. The login user is 'super'.
- UserGroupInformation ugi =
- UserGroupInformation.createProxyUser("joe", UserGroupInformation.getLoginUser());
- ugi.doAs(new PrivilegedExceptionAction<Void>() {
- public Void run() throws Exception {
- //Submit a job
- JobClient jc = new JobClient(conf);
- jc.submitJob(conf);
- //OR access hdfs
- FileSystem fs = FileSystem.get(conf);
- fs.mkdir(someFilePath);
- }
- }
-----
-
-* Configurations
-
- You can configure proxy user using properties
- <<<hadoop.proxyuser.${superuser}.hosts>>> along with either or both of
- <<<hadoop.proxyuser.${superuser}.groups>>>
- and <<<hadoop.proxyuser.${superuser}.users>>>.
-
- By specifying as below in core-site.xml,
- the superuser named <<<super>>> can connect
- only from <<<host1>>> and <<<host2>>>
- to impersonate a user belonging to <<<group1>>> and <<<group2>>>.
-
-----
- <property>
- <name>hadoop.proxyuser.super.hosts</name>
- <value>host1,host2</value>
- </property>
- <property>
- <name>hadoop.proxyuser.super.groups</name>
- <value>group1,group2</value>
- </property>
-
-----
-
- If these configurations are not present, impersonation will not be
- allowed and connection will fail.
-
- If more lax security is preferred, the wildcard value * may be used to
- allow impersonation from any host or of any user.
- For example, by specifying as below in core-site.xml,
- user named <<<oozie>>> accessing from any host
- can impersonate any user belonging to any group.
-
-----
- <property>
- <name>hadoop.proxyuser.oozie.hosts</name>
- <value>*</value>
- </property>
- <property>
- <name>hadoop.proxyuser.oozie.groups</name>
- <value>*</value>
- </property>
-----
-
- The <<<hadoop.proxyuser.${superuser}.hosts>>> accepts list of ip addresses,
- ip address ranges in CIDR format and/or host names.
- For example, by specifying as below,
- user named <<<super>>> accessing from hosts in the range
- <<<10.222.0.0-15>>> and <<<10.113.221.221>>> can impersonate
- <<<user1>>> and <<<user2>>>.
-
-----
- <property>
- <name>hadoop.proxyuser.super.hosts</name>
- <value>10.222.0.0/16,10.113.221.221</value>
- </property>
- <property>
- <name>hadoop.proxyuser.super.users</name>
- <value>user1,user2</value>
- </property>
-----
-
-
-* Caveats
-
- If the cluster is running in {{{./SecureMode.html}Secure Mode}},
- the superuser must have kerberos credentials to be able to impersonate
- another user.
-
- It cannot use delegation tokens for this feature. It
- would be wrong if superuser adds its own delegation token to the proxy
- user ugi, as it will allow the proxy user to connect to the service
- with the privileges of the superuser.
-
- However, if the superuser does want to give a delegation token to joe,
- it must first impersonate joe and get a delegation token for joe, in
- the same way as the code example above, and add it to the ugi of joe.
- In this way the delegation token will have the owner as joe.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/Tracing.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/Tracing.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/Tracing.apt.vm
deleted file mode 100644
index c51037b..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/Tracing.apt.vm
+++ /dev/null
@@ -1,233 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop Distributed File System-${project.version} - Enabling Dapper-like Tracing
- ---
- ---
- ${maven.build.timestamp}
-
-Enabling Dapper-like Tracing in Hadoop
-
-%{toc|section=1|fromDepth=0}
-
-* {Dapper-like Tracing in Hadoop}
-
-** HTrace
-
- {{{https://issues.apache.org/jira/browse/HDFS-5274}HDFS-5274}}
- added support for tracing requests through HDFS,
- using the open source tracing library, {{{https://git-wip-us.apache.org/repos/asf/incubator-htrace.git}Apache HTrace}}.
- Setting up tracing is quite simple, however it requires some very minor changes to your client code.
-
-** Samplers
- Configure the samplers in <<<core-site.xml>>> property: <<<hadoop.htrace.sampler>>>.
- The value can be NeverSampler, AlwaysSampler or ProbabilitySampler. NeverSampler: HTrace is OFF
- for all spans; AlwaysSampler: HTrace is ON for all spans; ProbabilitySampler: HTrace is ON for
- some percentage% of top-level spans.
-
-+----
- <property>
- <name>hadoop.htrace.sampler</name>
- <value>NeverSampler</value>
- </property>
-+----
-
-** SpanReceivers
-
- The tracing system works by collecting information in structs called 'Spans'.
- It is up to you to choose how you want to receive this information
- by implementing the SpanReceiver interface, which defines one method:
-
-+----
-public void receiveSpan(Span span);
-+----
-
- Configure what SpanReceivers you'd like to use
- by putting a comma separated list of the fully-qualified class name of
- classes implementing SpanReceiver
- in <<<core-site.xml>>> property: <<<hadoop.htrace.spanreceiver.classes>>>.
-
-+----
- <property>
- <name>hadoop.htrace.spanreceiver.classes</name>
- <value>org.apache.htrace.impl.LocalFileSpanReceiver</value>
- </property>
- <property>
- <name>hadoop.htrace.local-file-span-receiver.path</name>
- <value>/var/log/hadoop/htrace.out</value>
- </property>
-+----
-
- You can omit package name prefix if you use span receiver bundled with HTrace.
-
-+----
- <property>
- <name>hadoop.htrace.spanreceiver.classes</name>
- <value>LocalFileSpanReceiver</value>
- </property>
-+----
-
-
-
-** Setting up ZipkinSpanReceiver
-
- Instead of implementing SpanReceiver by yourself,
- you can use <<<ZipkinSpanReceiver>>> which uses
- {{{https://github.com/twitter/zipkin}Zipkin}}
- for collecting and displaying tracing data.
-
- In order to use <<<ZipkinSpanReceiver>>>,
- you need to download and setup {{{https://github.com/twitter/zipkin}Zipkin}} first.
-
- you also need to add the jar of <<<htrace-zipkin>>> to the classpath of Hadoop on each node.
- Here is example setup procedure.
-
-+----
- $ git clone https://github.com/cloudera/htrace
- $ cd htrace/htrace-zipkin
- $ mvn compile assembly:single
- $ cp target/htrace-zipkin-*-jar-with-dependencies.jar $HADOOP_HOME/share/hadoop/common/lib/
-+----
-
- The sample configuration for <<<ZipkinSpanReceiver>>> is shown below.
- By adding these to <<<core-site.xml>>> of NameNode and DataNodes,
- <<<ZipkinSpanReceiver>>> is initialized on the startup.
- You also need this configuration on the client node in addition to the servers.
-
-+----
- <property>
- <name>hadoop.htrace.spanreceiver.classes</name>
- <value>ZipkinSpanReceiver</value>
- </property>
- <property>
- <name>hadoop.htrace.zipkin.collector-hostname</name>
- <value>192.168.1.2</value>
- </property>
- <property>
- <name>hadoop.htrace.zipkin.collector-port</name>
- <value>9410</value>
- </property>
-+----
-
-
-** Dynamic update of tracing configuration
-
- You can use <<<hadoop trace>>> command to see and update the tracing configuration of each servers.
- You must specify IPC server address of namenode or datanode by <<<-host>>> option.
- You need to run the command against all servers if you want to update the configuration of all servers.
-
- <<<hadoop trace -list>>> shows list of loaded span receivers associated with the id.
-
-+----
- $ hadoop trace -list -host 192.168.56.2:9000
- ID CLASS
- 1 org.apache.htrace.impl.LocalFileSpanReceiver
-
- $ hadoop trace -list -host 192.168.56.2:50020
- ID CLASS
- 1 org.apache.htrace.impl.LocalFileSpanReceiver
-+----
-
- <<<hadoop trace -remove>>> removes span receiver from server.
- <<<-remove>>> options takes id of span receiver as argument.
-
-+----
- $ hadoop trace -remove 1 -host 192.168.56.2:9000
- Removed trace span receiver 1
-+----
-
- <<<hadoop trace -add>>> adds span receiver to server.
- You need to specify the class name of span receiver as argument of <<<-class>>> option.
- You can specify the configuration associated with span receiver by <<<-Ckey=value>>> options.
-
-+----
- $ hadoop trace -add -class LocalFileSpanReceiver -Chadoop.htrace.local-file-span-receiver.path=/tmp/htrace.out -host 192.168.56.2:9000
- Added trace span receiver 2 with configuration hadoop.htrace.local-file-span-receiver.path = /tmp/htrace.out
-
- $ hadoop trace -list -host 192.168.56.2:9000
- ID CLASS
- 2 org.apache.htrace.impl.LocalFileSpanReceiver
-+----
-
-
-** Starting tracing spans by HTrace API
-
- In order to trace,
- you will need to wrap the traced logic with <<tracing span>> as shown below.
- When there is running tracing spans,
- the tracing information is propagated to servers along with RPC requests.
-
- In addition, you need to initialize <<<SpanReceiver>>> once per process.
-
-+----
-import org.apache.hadoop.hdfs.HdfsConfiguration;
-import org.apache.hadoop.tracing.SpanReceiverHost;
-import org.apache.htrace.Sampler;
-import org.apache.htrace.Trace;
-import org.apache.htrace.TraceScope;
-
-...
-
- SpanReceiverHost.getInstance(new HdfsConfiguration());
-
-...
-
- TraceScope ts = Trace.startSpan("Gets", Sampler.ALWAYS);
- try {
- ... // traced logic
- } finally {
- if (ts != null) ts.close();
- }
-+----
-
-** Sample code for tracing
-
- The <<<TracingFsShell.java>>> shown below is the wrapper of FsShell
- which start tracing span before invoking HDFS shell command.
-
-+----
-import org.apache.hadoop.conf.Configuration;
-import org.apache.hadoop.fs.FsShell;
-import org.apache.hadoop.tracing.SpanReceiverHost;
-import org.apache.hadoop.util.ToolRunner;
-import org.apache.htrace.Sampler;
-import org.apache.htrace.Trace;
-import org.apache.htrace.TraceScope;
-
-public class TracingFsShell {
- public static void main(String argv[]) throws Exception {
- Configuration conf = new Configuration();
- FsShell shell = new FsShell();
- conf.setQuietMode(false);
- shell.setConf(conf);
- SpanReceiverHost.getInstance(conf);
- int res = 0;
- TraceScope ts = null;
- try {
- ts = Trace.startSpan("FsShell", Sampler.ALWAYS);
- res = ToolRunner.run(shell, argv);
- } finally {
- shell.close();
- if (ts != null) ts.close();
- }
- System.exit(res);
- }
-}
-+----
-
- You can compile and execute this code as shown below.
-
-+----
-$ javac -cp `hadoop classpath` TracingFsShell.java
-$ java -cp .:`hadoop classpath` TracingFsShell -ls /
-+----
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/markdown/CLIMiniCluster.md.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/markdown/CLIMiniCluster.md.vm b/hadoop-common-project/hadoop-common/src/site/markdown/CLIMiniCluster.md.vm
new file mode 100644
index 0000000..25fecda
--- /dev/null
+++ b/hadoop-common-project/hadoop-common/src/site/markdown/CLIMiniCluster.md.vm
@@ -0,0 +1,68 @@
+<!---
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License. See accompanying LICENSE file.
+-->
+
+Hadoop: CLI MiniCluster.
+========================
+
+* [Hadoop: CLI MiniCluster.](#Hadoop:_CLI_MiniCluster.)
+ * [Purpose](#Purpose)
+ * [Hadoop Tarball](#Hadoop_Tarball)
+ * [Running the MiniCluster](#Running_the_MiniCluster)
+
+Purpose
+-------
+
+Using the CLI MiniCluster, users can simply start and stop a single-node Hadoop cluster with a single command, and without the need to set any environment variables or manage configuration files. The CLI MiniCluster starts both a `YARN`/`MapReduce` & `HDFS` clusters.
+
+This is useful for cases where users want to quickly experiment with a real Hadoop cluster or test non-Java programs that rely on significant Hadoop functionality.
+
+Hadoop Tarball
+--------------
+
+You should be able to obtain the Hadoop tarball from the release. Also, you can directly create a tarball from the source:
+
+ $ mvn clean install -DskipTests
+ $ mvn package -Pdist -Dtar -DskipTests -Dmaven.javadoc.skip
+
+**NOTE:** You will need [protoc 2.5.0](http://code.google.com/p/protobuf/) installed.
+
+The tarball should be available in `hadoop-dist/target/` directory.
+
+Running the MiniCluster
+-----------------------
+
+From inside the root directory of the extracted tarball, you can start the CLI MiniCluster using the following command:
+
+ $ bin/hadoop jar ./share/hadoop/mapreduce/hadoop-mapreduce-client-jobclient-${project.version}-tests.jar minicluster -rmport RM_PORT -jhsport JHS_PORT
+
+In the example command above, `RM_PORT` and `JHS_PORT` should be replaced by the user's choice of these port numbers. If not specified, random free ports will be used.
+
+There are a number of command line arguments that the users can use to control which services to start, and to pass other configuration properties. The available command line arguments:
+
+ $ -D <property=value> Options to pass into configuration object
+ $ -datanodes <arg> How many datanodes to start (default 1)
+ $ -format Format the DFS (default false)
+ $ -help Prints option help.
+ $ -jhsport <arg> JobHistoryServer port (default 0--we choose)
+ $ -namenode <arg> URL of the namenode (default is either the DFS
+ $ cluster or a temporary dir)
+ $ -nnport <arg> NameNode port (default 0--we choose)
+ $ -nodemanagers <arg> How many nodemanagers to start (default 1)
+ $ -nodfs Don't start a mini DFS cluster
+ $ -nomr Don't start a mini MR cluster
+ $ -rmport <arg> ResourceManager port (default 0--we choose)
+ $ -writeConfig <path> Save configuration to this XML file.
+ $ -writeDetails <path> Write basic information to this JSON file.
+
+To display this full list of available arguments, the user can pass the `-help` argument to the above command.
[6/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Posted by aw...@apache.org.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/DeprecatedProperties.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/DeprecatedProperties.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/DeprecatedProperties.apt.vm
deleted file mode 100644
index c4f3b1e..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/DeprecatedProperties.apt.vm
+++ /dev/null
@@ -1,552 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop ${project.version}
- ---
- ---
- ${maven.build.timestamp}
-
-Deprecated Properties
-
- The following table lists the configuration property names that are
- deprecated in this version of Hadoop, and their replacements.
-
-*-------------------------------+-----------------------+
-|| <<Deprecated property name>> || <<New property name>>|
-*-------------------------------+-----------------------+
-|create.empty.dir.if.nonexist | mapreduce.jobcontrol.createdir.ifnotexist
-*---+---+
-|dfs.access.time.precision | dfs.namenode.accesstime.precision
-*---+---+
-|dfs.backup.address | dfs.namenode.backup.address
-*---+---+
-|dfs.backup.http.address | dfs.namenode.backup.http-address
-*---+---+
-|dfs.balance.bandwidthPerSec | dfs.datanode.balance.bandwidthPerSec
-*---+---+
-|dfs.block.size | dfs.blocksize
-*---+---+
-|dfs.data.dir | dfs.datanode.data.dir
-*---+---+
-|dfs.datanode.max.xcievers | dfs.datanode.max.transfer.threads
-*---+---+
-|dfs.df.interval | fs.df.interval
-*---+---+
-|dfs.federation.nameservice.id | dfs.nameservice.id
-*---+---+
-|dfs.federation.nameservices | dfs.nameservices
-*---+---+
-|dfs.http.address | dfs.namenode.http-address
-*---+---+
-|dfs.https.address | dfs.namenode.https-address
-*---+---+
-|dfs.https.client.keystore.resource | dfs.client.https.keystore.resource
-*---+---+
-|dfs.https.need.client.auth | dfs.client.https.need-auth
-*---+---+
-|dfs.max.objects | dfs.namenode.max.objects
-*---+---+
-|dfs.max-repl-streams | dfs.namenode.replication.max-streams
-*---+---+
-|dfs.name.dir | dfs.namenode.name.dir
-*---+---+
-|dfs.name.dir.restore | dfs.namenode.name.dir.restore
-*---+---+
-|dfs.name.edits.dir | dfs.namenode.edits.dir
-*---+---+
-|dfs.permissions | dfs.permissions.enabled
-*---+---+
-|dfs.permissions.supergroup | dfs.permissions.superusergroup
-*---+---+
-|dfs.read.prefetch.size | dfs.client.read.prefetch.size
-*---+---+
-|dfs.replication.considerLoad | dfs.namenode.replication.considerLoad
-*---+---+
-|dfs.replication.interval | dfs.namenode.replication.interval
-*---+---+
-|dfs.replication.min | dfs.namenode.replication.min
-*---+---+
-|dfs.replication.pending.timeout.sec | dfs.namenode.replication.pending.timeout-sec
-*---+---+
-|dfs.safemode.extension | dfs.namenode.safemode.extension
-*---+---+
-|dfs.safemode.threshold.pct | dfs.namenode.safemode.threshold-pct
-*---+---+
-|dfs.secondary.http.address | dfs.namenode.secondary.http-address
-*---+---+
-|dfs.socket.timeout | dfs.client.socket-timeout
-*---+---+
-|dfs.umaskmode | fs.permissions.umask-mode
-*---+---+
-|dfs.write.packet.size | dfs.client-write-packet-size
-*---+---+
-|fs.checkpoint.dir | dfs.namenode.checkpoint.dir
-*---+---+
-|fs.checkpoint.edits.dir | dfs.namenode.checkpoint.edits.dir
-*---+---+
-|fs.checkpoint.period | dfs.namenode.checkpoint.period
-*---+---+
-|fs.default.name | fs.defaultFS
-*---+---+
-|hadoop.configured.node.mapping | net.topology.configured.node.mapping
-*---+---+
-|hadoop.job.history.location | mapreduce.jobtracker.jobhistory.location
-*---+---+
-|hadoop.native.lib | io.native.lib.available
-*---+---+
-|hadoop.net.static.resolutions | mapreduce.tasktracker.net.static.resolutions
-*---+---+
-|hadoop.pipes.command-file.keep | mapreduce.pipes.commandfile.preserve
-*---+---+
-|hadoop.pipes.executable.interpretor | mapreduce.pipes.executable.interpretor
-*---+---+
-|hadoop.pipes.executable | mapreduce.pipes.executable
-*---+---+
-|hadoop.pipes.java.mapper | mapreduce.pipes.isjavamapper
-*---+---+
-|hadoop.pipes.java.recordreader | mapreduce.pipes.isjavarecordreader
-*---+---+
-|hadoop.pipes.java.recordwriter | mapreduce.pipes.isjavarecordwriter
-*---+---+
-|hadoop.pipes.java.reducer | mapreduce.pipes.isjavareducer
-*---+---+
-|hadoop.pipes.partitioner | mapreduce.pipes.partitioner
-*---+---+
-|heartbeat.recheck.interval | dfs.namenode.heartbeat.recheck-interval
-*---+---+
-|io.bytes.per.checksum | dfs.bytes-per-checksum
-*---+---+
-|io.sort.factor | mapreduce.task.io.sort.factor
-*---+---+
-|io.sort.mb | mapreduce.task.io.sort.mb
-*---+---+
-|io.sort.spill.percent | mapreduce.map.sort.spill.percent
-*---+---+
-|jobclient.completion.poll.interval | mapreduce.client.completion.pollinterval
-*---+---+
-|jobclient.output.filter | mapreduce.client.output.filter
-*---+---+
-|jobclient.progress.monitor.poll.interval | mapreduce.client.progressmonitor.pollinterval
-*---+---+
-|job.end.notification.url | mapreduce.job.end-notification.url
-*---+---+
-|job.end.retry.attempts | mapreduce.job.end-notification.retry.attempts
-*---+---+
-|job.end.retry.interval | mapreduce.job.end-notification.retry.interval
-*---+---+
-|job.local.dir | mapreduce.job.local.dir
-*---+---+
-|keep.failed.task.files | mapreduce.task.files.preserve.failedtasks
-*---+---+
-|keep.task.files.pattern | mapreduce.task.files.preserve.filepattern
-*---+---+
-|key.value.separator.in.input.line | mapreduce.input.keyvaluelinerecordreader.key.value.separator
-*---+---+
-|local.cache.size | mapreduce.tasktracker.cache.local.size
-*---+---+
-|map.input.file | mapreduce.map.input.file
-*---+---+
-|map.input.length | mapreduce.map.input.length
-*---+---+
-|map.input.start | mapreduce.map.input.start
-*---+---+
-|map.output.key.field.separator | mapreduce.map.output.key.field.separator
-*---+---+
-|map.output.key.value.fields.spec | mapreduce.fieldsel.map.output.key.value.fields.spec
-*---+---+
-|mapred.acls.enabled | mapreduce.cluster.acls.enabled
-*---+---+
-|mapred.binary.partitioner.left.offset | mapreduce.partition.binarypartitioner.left.offset
-*---+---+
-|mapred.binary.partitioner.right.offset | mapreduce.partition.binarypartitioner.right.offset
-*---+---+
-|mapred.cache.archives | mapreduce.job.cache.archives
-*---+---+
-|mapred.cache.archives.timestamps | mapreduce.job.cache.archives.timestamps
-*---+---+
-|mapred.cache.files | mapreduce.job.cache.files
-*---+---+
-|mapred.cache.files.timestamps | mapreduce.job.cache.files.timestamps
-*---+---+
-|mapred.cache.localArchives | mapreduce.job.cache.local.archives
-*---+---+
-|mapred.cache.localFiles | mapreduce.job.cache.local.files
-*---+---+
-|mapred.child.tmp | mapreduce.task.tmp.dir
-*---+---+
-|mapred.cluster.average.blacklist.threshold | mapreduce.jobtracker.blacklist.average.threshold
-*---+---+
-|mapred.cluster.map.memory.mb | mapreduce.cluster.mapmemory.mb
-*---+---+
-|mapred.cluster.max.map.memory.mb | mapreduce.jobtracker.maxmapmemory.mb
-*---+---+
-|mapred.cluster.max.reduce.memory.mb | mapreduce.jobtracker.maxreducememory.mb
-*---+---+
-|mapred.cluster.reduce.memory.mb | mapreduce.cluster.reducememory.mb
-*---+---+
-|mapred.committer.job.setup.cleanup.needed | mapreduce.job.committer.setup.cleanup.needed
-*---+---+
-|mapred.compress.map.output | mapreduce.map.output.compress
-*---+---+
-|mapred.data.field.separator | mapreduce.fieldsel.data.field.separator
-*---+---+
-|mapred.debug.out.lines | mapreduce.task.debugout.lines
-*---+---+
-|mapred.healthChecker.interval | mapreduce.tasktracker.healthchecker.interval
-*---+---+
-|mapred.healthChecker.script.args | mapreduce.tasktracker.healthchecker.script.args
-*---+---+
-|mapred.healthChecker.script.path | mapreduce.tasktracker.healthchecker.script.path
-*---+---+
-|mapred.healthChecker.script.timeout | mapreduce.tasktracker.healthchecker.script.timeout
-*---+---+
-|mapred.heartbeats.in.second | mapreduce.jobtracker.heartbeats.in.second
-*---+---+
-|mapred.hosts.exclude | mapreduce.jobtracker.hosts.exclude.filename
-*---+---+
-|mapred.hosts | mapreduce.jobtracker.hosts.filename
-*---+---+
-|mapred.inmem.merge.threshold | mapreduce.reduce.merge.inmem.threshold
-*---+---+
-|mapred.input.dir.formats | mapreduce.input.multipleinputs.dir.formats
-*---+---+
-|mapred.input.dir.mappers | mapreduce.input.multipleinputs.dir.mappers
-*---+---+
-|mapred.input.dir | mapreduce.input.fileinputformat.inputdir
-*---+---+
-|mapred.input.pathFilter.class | mapreduce.input.pathFilter.class
-*---+---+
-|mapred.jar | mapreduce.job.jar
-*---+---+
-|mapred.job.classpath.archives | mapreduce.job.classpath.archives
-*---+---+
-|mapred.job.classpath.files | mapreduce.job.classpath.files
-*---+---+
-|mapred.job.id | mapreduce.job.id
-*---+---+
-|mapred.jobinit.threads | mapreduce.jobtracker.jobinit.threads
-*---+---+
-|mapred.job.map.memory.mb | mapreduce.map.memory.mb
-*---+---+
-|mapred.job.name | mapreduce.job.name
-*---+---+
-|mapred.job.priority | mapreduce.job.priority
-*---+---+
-|mapred.job.queue.name | mapreduce.job.queuename
-*---+---+
-|mapred.job.reduce.input.buffer.percent | mapreduce.reduce.input.buffer.percent
-*---+---+
-|mapred.job.reduce.markreset.buffer.percent | mapreduce.reduce.markreset.buffer.percent
-*---+---+
-|mapred.job.reduce.memory.mb | mapreduce.reduce.memory.mb
-*---+---+
-|mapred.job.reduce.total.mem.bytes | mapreduce.reduce.memory.totalbytes
-*---+---+
-|mapred.job.reuse.jvm.num.tasks | mapreduce.job.jvm.numtasks
-*---+---+
-|mapred.job.shuffle.input.buffer.percent | mapreduce.reduce.shuffle.input.buffer.percent
-*---+---+
-|mapred.job.shuffle.merge.percent | mapreduce.reduce.shuffle.merge.percent
-*---+---+
-|mapred.job.tracker.handler.count | mapreduce.jobtracker.handler.count
-*---+---+
-|mapred.job.tracker.history.completed.location | mapreduce.jobtracker.jobhistory.completed.location
-*---+---+
-|mapred.job.tracker.http.address | mapreduce.jobtracker.http.address
-*---+---+
-|mapred.jobtracker.instrumentation | mapreduce.jobtracker.instrumentation
-*---+---+
-|mapred.jobtracker.job.history.block.size | mapreduce.jobtracker.jobhistory.block.size
-*---+---+
-|mapred.job.tracker.jobhistory.lru.cache.size | mapreduce.jobtracker.jobhistory.lru.cache.size
-*---+---+
-|mapred.job.tracker | mapreduce.jobtracker.address
-*---+---+
-|mapred.jobtracker.maxtasks.per.job | mapreduce.jobtracker.maxtasks.perjob
-*---+---+
-|mapred.job.tracker.persist.jobstatus.active | mapreduce.jobtracker.persist.jobstatus.active
-*---+---+
-|mapred.job.tracker.persist.jobstatus.dir | mapreduce.jobtracker.persist.jobstatus.dir
-*---+---+
-|mapred.job.tracker.persist.jobstatus.hours | mapreduce.jobtracker.persist.jobstatus.hours
-*---+---+
-|mapred.jobtracker.restart.recover | mapreduce.jobtracker.restart.recover
-*---+---+
-|mapred.job.tracker.retiredjobs.cache.size | mapreduce.jobtracker.retiredjobs.cache.size
-*---+---+
-|mapred.job.tracker.retire.jobs | mapreduce.jobtracker.retirejobs
-*---+---+
-|mapred.jobtracker.taskalloc.capacitypad | mapreduce.jobtracker.taskscheduler.taskalloc.capacitypad
-*---+---+
-|mapred.jobtracker.taskScheduler | mapreduce.jobtracker.taskscheduler
-*---+---+
-|mapred.jobtracker.taskScheduler.maxRunningTasksPerJob | mapreduce.jobtracker.taskscheduler.maxrunningtasks.perjob
-*---+---+
-|mapred.join.expr | mapreduce.join.expr
-*---+---+
-|mapred.join.keycomparator | mapreduce.join.keycomparator
-*---+---+
-|mapred.lazy.output.format | mapreduce.output.lazyoutputformat.outputformat
-*---+---+
-|mapred.line.input.format.linespermap | mapreduce.input.lineinputformat.linespermap
-*---+---+
-|mapred.linerecordreader.maxlength | mapreduce.input.linerecordreader.line.maxlength
-*---+---+
-|mapred.local.dir | mapreduce.cluster.local.dir
-*---+---+
-|mapred.local.dir.minspacekill | mapreduce.tasktracker.local.dir.minspacekill
-*---+---+
-|mapred.local.dir.minspacestart | mapreduce.tasktracker.local.dir.minspacestart
-*---+---+
-|mapred.map.child.env | mapreduce.map.env
-*---+---+
-|mapred.map.child.java.opts | mapreduce.map.java.opts
-*---+---+
-|mapred.map.child.log.level | mapreduce.map.log.level
-*---+---+
-|mapred.map.max.attempts | mapreduce.map.maxattempts
-*---+---+
-|mapred.map.output.compression.codec | mapreduce.map.output.compress.codec
-*---+---+
-|mapred.mapoutput.key.class | mapreduce.map.output.key.class
-*---+---+
-|mapred.mapoutput.value.class | mapreduce.map.output.value.class
-*---+---+
-|mapred.mapper.regex.group | mapreduce.mapper.regexmapper..group
-*---+---+
-|mapred.mapper.regex | mapreduce.mapper.regex
-*---+---+
-|mapred.map.task.debug.script | mapreduce.map.debug.script
-*---+---+
-|mapred.map.tasks | mapreduce.job.maps
-*---+---+
-|mapred.map.tasks.speculative.execution | mapreduce.map.speculative
-*---+---+
-|mapred.max.map.failures.percent | mapreduce.map.failures.maxpercent
-*---+---+
-|mapred.max.reduce.failures.percent | mapreduce.reduce.failures.maxpercent
-*---+---+
-|mapred.max.split.size | mapreduce.input.fileinputformat.split.maxsize
-*---+---+
-|mapred.max.tracker.blacklists | mapreduce.jobtracker.tasktracker.maxblacklists
-*---+---+
-|mapred.max.tracker.failures | mapreduce.job.maxtaskfailures.per.tracker
-*---+---+
-|mapred.merge.recordsBeforeProgress | mapreduce.task.merge.progress.records
-*---+---+
-|mapred.min.split.size | mapreduce.input.fileinputformat.split.minsize
-*---+---+
-|mapred.min.split.size.per.node | mapreduce.input.fileinputformat.split.minsize.per.node
-*---+---+
-|mapred.min.split.size.per.rack | mapreduce.input.fileinputformat.split.minsize.per.rack
-*---+---+
-|mapred.output.compression.codec | mapreduce.output.fileoutputformat.compress.codec
-*---+---+
-|mapred.output.compression.type | mapreduce.output.fileoutputformat.compress.type
-*---+---+
-|mapred.output.compress | mapreduce.output.fileoutputformat.compress
-*---+---+
-|mapred.output.dir | mapreduce.output.fileoutputformat.outputdir
-*---+---+
-|mapred.output.key.class | mapreduce.job.output.key.class
-*---+---+
-|mapred.output.key.comparator.class | mapreduce.job.output.key.comparator.class
-*---+---+
-|mapred.output.value.class | mapreduce.job.output.value.class
-*---+---+
-|mapred.output.value.groupfn.class | mapreduce.job.output.group.comparator.class
-*---+---+
-|mapred.permissions.supergroup | mapreduce.cluster.permissions.supergroup
-*---+---+
-|mapred.pipes.user.inputformat | mapreduce.pipes.inputformat
-*---+---+
-|mapred.reduce.child.env | mapreduce.reduce.env
-*---+---+
-|mapred.reduce.child.java.opts | mapreduce.reduce.java.opts
-*---+---+
-|mapred.reduce.child.log.level | mapreduce.reduce.log.level
-*---+---+
-|mapred.reduce.max.attempts | mapreduce.reduce.maxattempts
-*---+---+
-|mapred.reduce.parallel.copies | mapreduce.reduce.shuffle.parallelcopies
-*---+---+
-|mapred.reduce.slowstart.completed.maps | mapreduce.job.reduce.slowstart.completedmaps
-*---+---+
-|mapred.reduce.task.debug.script | mapreduce.reduce.debug.script
-*---+---+
-|mapred.reduce.tasks | mapreduce.job.reduces
-*---+---+
-|mapred.reduce.tasks.speculative.execution | mapreduce.reduce.speculative
-*---+---+
-|mapred.seqbinary.output.key.class | mapreduce.output.seqbinaryoutputformat.key.class
-*---+---+
-|mapred.seqbinary.output.value.class | mapreduce.output.seqbinaryoutputformat.value.class
-*---+---+
-|mapred.shuffle.connect.timeout | mapreduce.reduce.shuffle.connect.timeout
-*---+---+
-|mapred.shuffle.read.timeout | mapreduce.reduce.shuffle.read.timeout
-*---+---+
-|mapred.skip.attempts.to.start.skipping | mapreduce.task.skip.start.attempts
-*---+---+
-|mapred.skip.map.auto.incr.proc.count | mapreduce.map.skip.proc-count.auto-incr
-*---+---+
-|mapred.skip.map.max.skip.records | mapreduce.map.skip.maxrecords
-*---+---+
-|mapred.skip.on | mapreduce.job.skiprecords
-*---+---+
-|mapred.skip.out.dir | mapreduce.job.skip.outdir
-*---+---+
-|mapred.skip.reduce.auto.incr.proc.count | mapreduce.reduce.skip.proc-count.auto-incr
-*---+---+
-|mapred.skip.reduce.max.skip.groups | mapreduce.reduce.skip.maxgroups
-*---+---+
-|mapred.speculative.execution.slowNodeThreshold | mapreduce.job.speculative.slownodethreshold
-*---+---+
-|mapred.speculative.execution.slowTaskThreshold | mapreduce.job.speculative.slowtaskthreshold
-*---+---+
-|mapred.speculative.execution.speculativeCap | mapreduce.job.speculative.speculativecap
-*---+---+
-|mapred.submit.replication | mapreduce.client.submit.file.replication
-*---+---+
-|mapred.system.dir | mapreduce.jobtracker.system.dir
-*---+---+
-|mapred.task.cache.levels | mapreduce.jobtracker.taskcache.levels
-*---+---+
-|mapred.task.id | mapreduce.task.attempt.id
-*---+---+
-|mapred.task.is.map | mapreduce.task.ismap
-*---+---+
-|mapred.task.partition | mapreduce.task.partition
-*---+---+
-|mapred.task.profile | mapreduce.task.profile
-*---+---+
-|mapred.task.profile.maps | mapreduce.task.profile.maps
-*---+---+
-|mapred.task.profile.params | mapreduce.task.profile.params
-*---+---+
-|mapred.task.profile.reduces | mapreduce.task.profile.reduces
-*---+---+
-|mapred.task.timeout | mapreduce.task.timeout
-*---+---+
-|mapred.tasktracker.dns.interface | mapreduce.tasktracker.dns.interface
-*---+---+
-|mapred.tasktracker.dns.nameserver | mapreduce.tasktracker.dns.nameserver
-*---+---+
-|mapred.tasktracker.events.batchsize | mapreduce.tasktracker.events.batchsize
-*---+---+
-|mapred.tasktracker.expiry.interval | mapreduce.jobtracker.expire.trackers.interval
-*---+---+
-|mapred.task.tracker.http.address | mapreduce.tasktracker.http.address
-*---+---+
-|mapred.tasktracker.indexcache.mb | mapreduce.tasktracker.indexcache.mb
-*---+---+
-|mapred.tasktracker.instrumentation | mapreduce.tasktracker.instrumentation
-*---+---+
-|mapred.tasktracker.map.tasks.maximum | mapreduce.tasktracker.map.tasks.maximum
-*---+---+
-|mapred.tasktracker.memory_calculator_plugin | mapreduce.tasktracker.resourcecalculatorplugin
-*---+---+
-|mapred.tasktracker.memorycalculatorplugin | mapreduce.tasktracker.resourcecalculatorplugin
-*---+---+
-|mapred.tasktracker.reduce.tasks.maximum | mapreduce.tasktracker.reduce.tasks.maximum
-*---+---+
-|mapred.task.tracker.report.address | mapreduce.tasktracker.report.address
-*---+---+
-|mapred.task.tracker.task-controller | mapreduce.tasktracker.taskcontroller
-*---+---+
-|mapred.tasktracker.taskmemorymanager.monitoring-interval | mapreduce.tasktracker.taskmemorymanager.monitoringinterval
-*---+---+
-|mapred.tasktracker.tasks.sleeptime-before-sigkill | mapreduce.tasktracker.tasks.sleeptimebeforesigkill
-*---+---+
-|mapred.temp.dir | mapreduce.cluster.temp.dir
-*---+---+
-|mapred.text.key.comparator.options | mapreduce.partition.keycomparator.options
-*---+---+
-|mapred.text.key.partitioner.options | mapreduce.partition.keypartitioner.options
-*---+---+
-|mapred.textoutputformat.separator | mapreduce.output.textoutputformat.separator
-*---+---+
-|mapred.tip.id | mapreduce.task.id
-*---+---+
-|mapreduce.combine.class | mapreduce.job.combine.class
-*---+---+
-|mapreduce.inputformat.class | mapreduce.job.inputformat.class
-*---+---+
-|mapreduce.job.counters.limit | mapreduce.job.counters.max
-*---+---+
-|mapreduce.jobtracker.permissions.supergroup | mapreduce.cluster.permissions.supergroup
-*---+---+
-|mapreduce.map.class | mapreduce.job.map.class
-*---+---+
-|mapreduce.outputformat.class | mapreduce.job.outputformat.class
-*---+---+
-|mapreduce.partitioner.class | mapreduce.job.partitioner.class
-*---+---+
-|mapreduce.reduce.class | mapreduce.job.reduce.class
-*---+---+
-|mapred.used.genericoptionsparser | mapreduce.client.genericoptionsparser.used
-*---+---+
-|mapred.userlog.limit.kb | mapreduce.task.userlog.limit.kb
-*---+---+
-|mapred.userlog.retain.hours | mapreduce.job.userlog.retain.hours
-*---+---+
-|mapred.working.dir | mapreduce.job.working.dir
-*---+---+
-|mapred.work.output.dir | mapreduce.task.output.dir
-*---+---+
-|min.num.spills.for.combine | mapreduce.map.combine.minspills
-*---+---+
-|reduce.output.key.value.fields.spec | mapreduce.fieldsel.reduce.output.key.value.fields.spec
-*---+---+
-|security.job.submission.protocol.acl | security.job.client.protocol.acl
-*---+---+
-|security.task.umbilical.protocol.acl | security.job.task.protocol.acl
-*---+---+
-|sequencefile.filter.class | mapreduce.input.sequencefileinputfilter.class
-*---+---+
-|sequencefile.filter.frequency | mapreduce.input.sequencefileinputfilter.frequency
-*---+---+
-|sequencefile.filter.regex | mapreduce.input.sequencefileinputfilter.regex
-*---+---+
-|session.id | dfs.metrics.session-id
-*---+---+
-|slave.host.name | dfs.datanode.hostname
-*---+---+
-|slave.host.name | mapreduce.tasktracker.host.name
-*---+---+
-|tasktracker.contention.tracking | mapreduce.tasktracker.contention.tracking
-*---+---+
-|tasktracker.http.threads | mapreduce.tasktracker.http.threads
-*---+---+
-|topology.node.switch.mapping.impl | net.topology.node.switch.mapping.impl
-*---+---+
-|topology.script.file.name | net.topology.script.file.name
-*---+---+
-|topology.script.number.args | net.topology.script.number.args
-*---+---+
-|user.name | mapreduce.job.user.name
-*---+---+
-|webinterface.private.actions | mapreduce.jobtracker.webinterface.trusted
-*---+---+
-|yarn.app.mapreduce.yarn.app.mapreduce.client-am.ipc.max-retries-on-timeouts | yarn.app.mapreduce.client-am.ipc.max-retries-on-timeouts
-*---+---+
-
- The following table lists additional changes to some configuration properties:
-
-*-------------------------------+-----------------------+
-|| <<Deprecated property name>> || <<New property name>>|
-*-------------------------------+-----------------------+
-|mapred.create.symlink | NONE - symlinking is always on
-*---+---+
-|mapreduce.job.cache.symlink.create | NONE - symlinking is always on
-*---+---+
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/FileSystemShell.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/FileSystemShell.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/FileSystemShell.apt.vm
deleted file mode 100644
index 6831ebf..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/FileSystemShell.apt.vm
+++ /dev/null
@@ -1,764 +0,0 @@
-~~ Licensed to the Apache Software Foundation (ASF) under one or more
-~~ contributor license agreements. See the NOTICE file distributed with
-~~ this work for additional information regarding copyright ownership.
-~~ The ASF licenses this file to You under the Apache License, Version 2.0
-~~ (the "License"); you may not use this file except in compliance with
-~~ the License. You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License.
-
- ---
- File System Shell Guide
- ---
- ---
- ${maven.build.timestamp}
-
-%{toc}
-
-Overview
-
- The File System (FS) shell includes various shell-like commands that
- directly interact with the Hadoop Distributed File System (HDFS) as well as
- other file systems that Hadoop supports, such as Local FS, HFTP FS, S3 FS,
- and others. The FS shell is invoked by:
-
-+---
-bin/hadoop fs <args>
-+---
-
- All FS shell commands take path URIs as arguments. The URI format is
- <<<scheme://authority/path>>>. For HDFS the scheme is <<<hdfs>>>, and for
- the Local FS the scheme is <<<file>>>. The scheme and authority are
- optional. If not specified, the default scheme specified in the
- configuration is used. An HDFS file or directory such as /parent/child can
- be specified as <<<hdfs://namenodehost/parent/child>>> or simply as
- <<</parent/child>>> (given that your configuration is set to point to
- <<<hdfs://namenodehost>>>).
-
- Most of the commands in FS shell behave like corresponding Unix commands.
- Differences are described with each of the commands. Error information is
- sent to stderr and the output is sent to stdout.
-
- If HDFS is being used, <<<hdfs dfs>>> is a synonym.
-
- See the {{{./CommandsManual.html}Commands Manual}} for generic shell options.
-
-* appendToFile
-
- Usage: <<<hadoop fs -appendToFile <localsrc> ... <dst> >>>
-
- Append single src, or multiple srcs from local file system to the
- destination file system. Also reads input from stdin and appends to
- destination file system.
-
- * <<<hadoop fs -appendToFile localfile /user/hadoop/hadoopfile>>>
-
- * <<<hadoop fs -appendToFile localfile1 localfile2 /user/hadoop/hadoopfile>>>
-
- * <<<hadoop fs -appendToFile localfile hdfs://nn.example.com/hadoop/hadoopfile>>>
-
- * <<<hadoop fs -appendToFile - hdfs://nn.example.com/hadoop/hadoopfile>>>
- Reads the input from stdin.
-
- Exit Code:
-
- Returns 0 on success and 1 on error.
-
-* cat
-
- Usage: <<<hadoop fs -cat URI [URI ...]>>>
-
- Copies source paths to stdout.
-
- Example:
-
- * <<<hadoop fs -cat hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2>>>
-
- * <<<hadoop fs -cat file:///file3 /user/hadoop/file4>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* checksum
-
- Usage: <<<hadoop fs -checksum URI>>>
-
- Returns the checksum information of a file.
-
- Example:
-
- * <<<hadoop fs -checksum hdfs://nn1.example.com/file1>>>
-
- * <<<hadoop fs -checksum file:///etc/hosts>>>
-
-* chgrp
-
- Usage: <<<hadoop fs -chgrp [-R] GROUP URI [URI ...]>>>
-
- Change group association of files. The user must be the owner of files, or
- else a super-user. Additional information is in the
- {{{../hadoop-hdfs/HdfsPermissionsGuide.html}Permissions Guide}}.
-
- Options
-
- * The -R option will make the change recursively through the directory structure.
-
-* chmod
-
- Usage: <<<hadoop fs -chmod [-R] <MODE[,MODE]... | OCTALMODE> URI [URI ...]>>>
-
- Change the permissions of files. With -R, make the change recursively
- through the directory structure. The user must be the owner of the file, or
- else a super-user. Additional information is in the
- {{{../hadoop-hdfs/HdfsPermissionsGuide.html}Permissions Guide}}.
-
- Options
-
- * The -R option will make the change recursively through the directory structure.
-
-* chown
-
- Usage: <<<hadoop fs -chown [-R] [OWNER][:[GROUP]] URI [URI ]>>>
-
- Change the owner of files. The user must be a super-user. Additional information
- is in the {{{../hadoop-hdfs/HdfsPermissionsGuide.html}Permissions Guide}}.
-
- Options
-
- * The -R option will make the change recursively through the directory structure.
-
-* copyFromLocal
-
- Usage: <<<hadoop fs -copyFromLocal <localsrc> URI>>>
-
- Similar to put command, except that the source is restricted to a local
- file reference.
-
- Options:
-
- * The -f option will overwrite the destination if it already exists.
-
-* copyToLocal
-
- Usage: <<<hadoop fs -copyToLocal [-ignorecrc] [-crc] URI <localdst> >>>
-
- Similar to get command, except that the destination is restricted to a
- local file reference.
-
-* count
-
- Usage: <<<hadoop fs -count [-q] [-h] [-v] <paths> >>>
-
- Count the number of directories, files and bytes under the paths that match
- the specified file pattern. The output columns with -count are: DIR_COUNT,
- FILE_COUNT, CONTENT_SIZE PATHNAME
-
- The output columns with -count -q are: QUOTA, REMAINING_QUATA, SPACE_QUOTA,
- REMAINING_SPACE_QUOTA, DIR_COUNT, FILE_COUNT, CONTENT_SIZE, PATHNAME
-
- The -h option shows sizes in human readable format.
-
- The -v option displays a header line.
-
- Example:
-
- * <<<hadoop fs -count hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2>>>
-
- * <<<hadoop fs -count -q hdfs://nn1.example.com/file1>>>
-
- * <<<hadoop fs -count -q -h hdfs://nn1.example.com/file1>>>
-
- * <<<hdfs dfs -count -q -h -v hdfs://nn1.example.com/file1>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* cp
-
- Usage: <<<hadoop fs -cp [-f] [-p | -p[topax]] URI [URI ...] <dest> >>>
-
- Copy files from source to destination. This command allows multiple sources
- as well in which case the destination must be a directory.
-
- 'raw.*' namespace extended attributes are preserved if (1) the source and
- destination filesystems support them (HDFS only), and (2) all source and
- destination pathnames are in the /.reserved/raw hierarchy. Determination of
- whether raw.* namespace xattrs are preserved is independent of the
- -p (preserve) flag.
-
- Options:
-
- * The -f option will overwrite the destination if it already exists.
-
- * The -p option will preserve file attributes [topx] (timestamps,
- ownership, permission, ACL, XAttr). If -p is specified with no <arg>,
- then preserves timestamps, ownership, permission. If -pa is specified,
- then preserves permission also because ACL is a super-set of
- permission. Determination of whether raw namespace extended attributes
- are preserved is independent of the -p flag.
-
- Example:
-
- * <<<hadoop fs -cp /user/hadoop/file1 /user/hadoop/file2>>>
-
- * <<<hadoop fs -cp /user/hadoop/file1 /user/hadoop/file2 /user/hadoop/dir>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* createSnapshot
-
- See {{{../hadoop-hdfs/HdfsSnapshots.html}HDFS Snapshots Guide}}.
-
-
-* deleteSnapshot
-
- See {{{../hadoop-hdfs/HdfsSnapshots.html}HDFS Snapshots Guide}}.
-
-* df
-
- Usage: <<<hadoop fs -df [-h] URI [URI ...]>>>
-
- Displays free space.
-
- Options:
-
- * The -h option will format file sizes in a "human-readable" fashion (e.g
- 64.0m instead of 67108864)
-
- Example:
-
- * <<<hadoop dfs -df /user/hadoop/dir1>>>
-
-* du
-
- Usage: <<<hadoop fs -du [-s] [-h] URI [URI ...]>>>
-
- Displays sizes of files and directories contained in the given directory or
- the length of a file in case its just a file.
-
- Options:
-
- * The -s option will result in an aggregate summary of file lengths being
- displayed, rather than the individual files.
-
- * The -h option will format file sizes in a "human-readable" fashion (e.g
- 64.0m instead of 67108864)
-
- Example:
-
- * <<<hadoop fs -du /user/hadoop/dir1 /user/hadoop/file1 hdfs://nn.example.com/user/hadoop/dir1>>>
-
- Exit Code:
- Returns 0 on success and -1 on error.
-
-* dus
-
- Usage: <<<hadoop fs -dus <args> >>>
-
- Displays a summary of file lengths.
-
- <<Note:>> This command is deprecated. Instead use <<<hadoop fs -du -s>>>.
-
-* expunge
-
- Usage: <<<hadoop fs -expunge>>>
-
- Empty the Trash. Refer to the {{{../hadoop-hdfs/HdfsDesign.html}
- HDFS Architecture Guide}} for more information on the Trash feature.
-
-* find
-
- Usage: <<<hadoop fs -find <path> ... <expression> ... >>>
-
- Finds all files that match the specified expression and applies selected
- actions to them. If no <path> is specified then defaults to the current
- working directory. If no expression is specified then defaults to -print.
-
- The following primary expressions are recognised:
-
- * -name pattern \
- -iname pattern
-
- Evaluates as true if the basename of the file matches the pattern using
- standard file system globbing. If -iname is used then the match is case
- insensitive.
-
- * -print \
- -print0
-
- Always evaluates to true. Causes the current pathname to be written to
- standard output. If the -print0 expression is used then an ASCII NULL
- character is appended.
-
- The following operators are recognised:
-
- * expression -a expression \
- expression -and expression \
- expression expression
-
- Logical AND operator for joining two expressions. Returns true if both
- child expressions return true. Implied by the juxtaposition of two
- expressions and so does not need to be explicitly specified. The second
- expression will not be applied if the first fails.
-
- Example:
-
- <<<hadoop fs -find / -name test -print>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* get
-
- Usage: <<<hadoop fs -get [-ignorecrc] [-crc] <src> <localdst> >>>
-
- Copy files to the local file system. Files that fail the CRC check may be
- copied with the -ignorecrc option. Files and CRCs may be copied using the
- -crc option.
-
- Example:
-
- * <<<hadoop fs -get /user/hadoop/file localfile>>>
-
- * <<<hadoop fs -get hdfs://nn.example.com/user/hadoop/file localfile>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* getfacl
-
- Usage: <<<hadoop fs -getfacl [-R] <path> >>>
-
- Displays the Access Control Lists (ACLs) of files and directories. If a
- directory has a default ACL, then getfacl also displays the default ACL.
-
- Options:
-
- * -R: List the ACLs of all files and directories recursively.
-
- * <path>: File or directory to list.
-
- Examples:
-
- * <<<hadoop fs -getfacl /file>>>
-
- * <<<hadoop fs -getfacl -R /dir>>>
-
- Exit Code:
-
- Returns 0 on success and non-zero on error.
-
-* getfattr
-
- Usage: <<<hadoop fs -getfattr [-R] {-n name | -d} [-e en] <path> >>>
-
- Displays the extended attribute names and values (if any) for a file or
- directory.
-
- Options:
-
- * -R: Recursively list the attributes for all files and directories.
-
- * -n name: Dump the named extended attribute value.
-
- * -d: Dump all extended attribute values associated with pathname.
-
- * -e <encoding>: Encode values after retrieving them. Valid encodings are "text", "hex", and "base64". Values encoded as text strings are enclosed in double quotes ("), and values encoded as hexadecimal and base64 are prefixed with 0x and 0s, respectively.
-
- * <path>: The file or directory.
-
- Examples:
-
- * <<<hadoop fs -getfattr -d /file>>>
-
- * <<<hadoop fs -getfattr -R -n user.myAttr /dir>>>
-
- Exit Code:
-
- Returns 0 on success and non-zero on error.
-
-* getmerge
-
- Usage: <<<hadoop fs -getmerge <src> <localdst> [addnl]>>>
-
- Takes a source directory and a destination file as input and concatenates
- files in src into the destination local file. Optionally addnl can be set to
- enable adding a newline character at the
- end of each file.
-
-* help
-
- Usage: <<<hadoop fs -help>>>
-
- Return usage output.
-
-* ls
-
- Usage: <<<hadoop fs -ls [-d] [-h] [-R] [-t] [-S] [-r] [-u] <args> >>>
-
- Options:
-
- * -d: Directories are listed as plain files.
-
- * -h: Format file sizes in a human-readable fashion (eg 64.0m instead of 67108864).
-
- * -R: Recursively list subdirectories encountered.
-
- * -t: Sort output by modification time (most recent first).
-
- * -S: Sort output by file size.
-
- * -r: Reverse the sort order.
-
- * -u: Use access time rather than modification time for display and sorting.
-
- For a file ls returns stat on the file with the following format:
-
-+---+
-permissions number_of_replicas userid groupid filesize modification_date modification_time filename
-+---+
-
- For a directory it returns list of its direct children as in Unix. A directory is listed as:
-
-+---+
-permissions userid groupid modification_date modification_time dirname
-+---+
-
- Files within a directory are order by filename by default.
-
-
- Example:
-
- * <<<hadoop fs -ls /user/hadoop/file1>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* lsr
-
- Usage: <<<hadoop fs -lsr <args> >>>
-
- Recursive version of ls.
-
- <<Note:>> This command is deprecated. Instead use <<<hadoop fs -ls -R>>>
-
-* mkdir
-
- Usage: <<<hadoop fs -mkdir [-p] <paths> >>>
-
- Takes path uri's as argument and creates directories.
-
- Options:
-
- * The -p option behavior is much like Unix mkdir -p, creating parent directories along the path.
-
- Example:
-
- * <<<hadoop fs -mkdir /user/hadoop/dir1 /user/hadoop/dir2>>>
-
- * <<<hadoop fs -mkdir hdfs://nn1.example.com/user/hadoop/dir hdfs://nn2.example.com/user/hadoop/dir>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* moveFromLocal
-
- Usage: <<<hadoop fs -moveFromLocal <localsrc> <dst> >>>
-
- Similar to put command, except that the source localsrc is deleted after
- it's copied.
-
-* moveToLocal
-
- Usage: <<<hadoop fs -moveToLocal [-crc] <src> <dst> >>>
-
- Displays a "Not implemented yet" message.
-
-* mv
-
- Usage: <<<hadoop fs -mv URI [URI ...] <dest> >>>
-
- Moves files from source to destination. This command allows multiple sources
- as well in which case the destination needs to be a directory. Moving files
- across file systems is not permitted.
-
- Example:
-
- * <<<hadoop fs -mv /user/hadoop/file1 /user/hadoop/file2>>>
-
- * <<<hadoop fs -mv hdfs://nn.example.com/file1 hdfs://nn.example.com/file2 hdfs://nn.example.com/file3 hdfs://nn.example.com/dir1>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* put
-
- Usage: <<<hadoop fs -put <localsrc> ... <dst> >>>
-
- Copy single src, or multiple srcs from local file system to the destination
- file system. Also reads input from stdin and writes to destination file
- system.
-
- * <<<hadoop fs -put localfile /user/hadoop/hadoopfile>>>
-
- * <<<hadoop fs -put localfile1 localfile2 /user/hadoop/hadoopdir>>>
-
- * <<<hadoop fs -put localfile hdfs://nn.example.com/hadoop/hadoopfile>>>
-
- * <<<hadoop fs -put - hdfs://nn.example.com/hadoop/hadoopfile>>>
- Reads the input from stdin.
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* renameSnapshot
-
- See {{{../hadoop-hdfs/HdfsSnapshots.html}HDFS Snapshots Guide}}.
-
-* rm
-
- Usage: <<<hadoop fs -rm [-f] [-r|-R] [-skipTrash] URI [URI ...]>>>
-
- Delete files specified as args.
-
- Options:
-
- * The -f option will not display a diagnostic message or modify the exit
- status to reflect an error if the file does not exist.
-
- * The -R option deletes the directory and any content under it recursively.
-
- * The -r option is equivalent to -R.
-
- * The -skipTrash option will bypass trash, if enabled, and delete the
- specified file(s) immediately. This can be useful when it is necessary
- to delete files from an over-quota directory.
-
- Example:
-
- * <<<hadoop fs -rm hdfs://nn.example.com/file /user/hadoop/emptydir>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* rmdir
-
- Usage: <<<hadoop fs -rmdir [--ignore-fail-on-non-empty] URI [URI ...]>>>
-
- Delete a directory.
-
- Options:
-
- * --ignore-fail-on-non-empty: When using wildcards, do not fail if a directory still contains files.
-
- Example:
-
- * <<<hadoop fs -rmdir /user/hadoop/emptydir>>>
-
-* rmr
-
- Usage: <<<hadoop fs -rmr [-skipTrash] URI [URI ...]>>>
-
- Recursive version of delete.
-
- <<Note:>> This command is deprecated. Instead use <<<hadoop fs -rm -r>>>
-
-* setfacl
-
- Usage: <<<hadoop fs -setfacl [-R] [{-b|-k} {-m|-x <acl_spec>} <path>]|[--set <acl_spec> <path>] >>>
-
- Sets Access Control Lists (ACLs) of files and directories.
-
- Options:
-
- * -b: Remove all but the base ACL entries. The entries for user, group and
- others are retained for compatibility with permission bits.
-
- * -k: Remove the default ACL.
-
- * -R: Apply operations to all files and directories recursively.
-
- * -m: Modify ACL. New entries are added to the ACL, and existing entries
- are retained.
-
- * -x: Remove specified ACL entries. Other ACL entries are retained.
-
- * --set: Fully replace the ACL, discarding all existing entries. The
- <acl_spec> must include entries for user, group, and others for
- compatibility with permission bits.
-
- * <acl_spec>: Comma separated list of ACL entries.
-
- * <path>: File or directory to modify.
-
- Examples:
-
- * <<<hadoop fs -setfacl -m user:hadoop:rw- /file>>>
-
- * <<<hadoop fs -setfacl -x user:hadoop /file>>>
-
- * <<<hadoop fs -setfacl -b /file>>>
-
- * <<<hadoop fs -setfacl -k /dir>>>
-
- * <<<hadoop fs -setfacl --set user::rw-,user:hadoop:rw-,group::r--,other::r-- /file>>>
-
- * <<<hadoop fs -setfacl -R -m user:hadoop:r-x /dir>>>
-
- * <<<hadoop fs -setfacl -m default:user:hadoop:r-x /dir>>>
-
- Exit Code:
-
- Returns 0 on success and non-zero on error.
-
-* setfattr
-
- Usage: <<<hadoop fs -setfattr {-n name [-v value] | -x name} <path> >>>
-
- Sets an extended attribute name and value for a file or directory.
-
- Options:
-
- * -b: Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits.
-
- * -n name: The extended attribute name.
-
- * -v value: The extended attribute value. There are three different encoding methods for the value. If the argument is enclosed in double quotes, then the value is the string inside the quotes. If the argument is prefixed with 0x or 0X, then it is taken as a hexadecimal number. If the argument begins with 0s or 0S, then it is taken as a base64 encoding.
-
- * -x name: Remove the extended attribute.
-
- * <path>: The file or directory.
-
- Examples:
-
- * <<<hadoop fs -setfattr -n user.myAttr -v myValue /file>>>
-
- * <<<hadoop fs -setfattr -n user.noValue /file>>>
-
- * <<<hadoop fs -setfattr -x user.myAttr /file>>>
-
- Exit Code:
-
- Returns 0 on success and non-zero on error.
-
-* setrep
-
- Usage: <<<hadoop fs -setrep [-R] [-w] <numReplicas> <path> >>>
-
- Changes the replication factor of a file. If <path> is a directory then
- the command recursively changes the replication factor of all files under
- the directory tree rooted at <path>.
-
- Options:
-
- * The -w flag requests that the command wait for the replication
- to complete. This can potentially take a very long time.
-
- * The -R flag is accepted for backwards compatibility. It has no effect.
-
- Example:
-
- * <<<hadoop fs -setrep -w 3 /user/hadoop/dir1>>>
-
- Exit Code:
-
- Returns 0 on success and -1 on error.
-
-* stat
-
- Usage: <<<hadoop fs -stat [format] \<path\> ...>>>
-
- Print statistics about the file/directory at \<path\> in the specified
- format. Format accepts filesize in blocks (%b), type (%F), group name of
- owner (%g), name (%n), block size (%o), replication (%r), user name of
- owner(%u), and modification date (%y, %Y). %y shows UTC date as
- "yyyy-MM-dd HH:mm:ss" and %Y shows milliseconds since January 1, 1970 UTC.
- If the format is not specified, %y is used by default.
-
- Example:
-
- * <<<hadoop fs -stat "%F %u:%g %b %y %n" /file>>>
-
- Exit Code:
- Returns 0 on success and -1 on error.
-
-* tail
-
- Usage: <<<hadoop fs -tail [-f] URI>>>
-
- Displays last kilobyte of the file to stdout.
-
- Options:
-
- * The -f option will output appended data as the file grows, as in Unix.
-
- Example:
-
- * <<<hadoop fs -tail pathname>>>
-
- Exit Code:
- Returns 0 on success and -1 on error.
-
-* test
-
- Usage: <<<hadoop fs -test -[defsz] URI>>>
-
- Options:
-
- * -d: f the path is a directory, return 0.
-
- * -e: if the path exists, return 0.
-
- * -f: if the path is a file, return 0.
-
- * -s: if the path is not empty, return 0.
-
- * -z: if the file is zero length, return 0.
-
- Example:
-
- * <<<hadoop fs -test -e filename>>>
-
-* text
-
- Usage: <<<hadoop fs -text <src> >>>
-
- Takes a source file and outputs the file in text format. The allowed formats
- are zip and TextRecordInputStream.
-
-* touchz
-
- Usage: <<<hadoop fs -touchz URI [URI ...]>>>
-
- Create a file of zero length.
-
- Example:
-
- * <<<hadoop fs -touchz pathname>>>
-
- Exit Code:
- Returns 0 on success and -1 on error.
-
-
-* usage
-
- Usage: <<<hadoop fs -usage command>>>
-
- Return the help for an individual command.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/HttpAuthentication.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/HttpAuthentication.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/HttpAuthentication.apt.vm
deleted file mode 100644
index 1f95da0..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/HttpAuthentication.apt.vm
+++ /dev/null
@@ -1,98 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Authentication for Hadoop HTTP web-consoles
- ---
- ---
- ${maven.build.timestamp}
-
-Authentication for Hadoop HTTP web-consoles
-
-%{toc|section=1|fromDepth=0}
-
-* Introduction
-
- This document describes how to configure Hadoop HTTP web-consoles to
- require user authentication.
-
- By default Hadoop HTTP web-consoles (JobTracker, NameNode, TaskTrackers
- and DataNodes) allow access without any form of authentication.
-
- Similarly to Hadoop RPC, Hadoop HTTP web-consoles can be configured to
- require Kerberos authentication using HTTP SPNEGO protocol (supported
- by browsers like Firefox and Internet Explorer).
-
- In addition, Hadoop HTTP web-consoles support the equivalent of
- Hadoop's Pseudo/Simple authentication. If this option is enabled, user
- must specify their user name in the first browser interaction using the
- user.name query string parameter. For example:
- <<<http://localhost:50030/jobtracker.jsp?user.name=babu>>>.
-
- If a custom authentication mechanism is required for the HTTP
- web-consoles, it is possible to implement a plugin to support the
- alternate authentication mechanism (refer to Hadoop hadoop-auth for details
- on writing an <<<AuthenticatorHandler>>>).
-
- The next section describes how to configure Hadoop HTTP web-consoles to
- require user authentication.
-
-* Configuration
-
- The following properties should be in the <<<core-site.xml>>> of all the
- nodes in the cluster.
-
- <<<hadoop.http.filter.initializers>>>: add to this property the
- <<<org.apache.hadoop.security.AuthenticationFilterInitializer>>> initializer
- class.
-
- <<<hadoop.http.authentication.type>>>: Defines authentication used for the
- HTTP web-consoles. The supported values are: <<<simple>>> | <<<kerberos>>> |
- <<<#AUTHENTICATION_HANDLER_CLASSNAME#>>>. The dfeault value is <<<simple>>>.
-
- <<<hadoop.http.authentication.token.validity>>>: Indicates how long (in
- seconds) an authentication token is valid before it has to be renewed.
- The default value is <<<36000>>>.
-
- <<<hadoop.http.authentication.signature.secret.file>>>: The signature secret
- file for signing the authentication tokens. The same secret should be used
- for all nodes in the cluster, JobTracker, NameNode, DataNode and TastTracker.
- The default value is <<<${user.home}/hadoop-http-auth-signature-secret>>>.
- IMPORTANT: This file should be readable only by the Unix user running the
- daemons.
-
- <<<hadoop.http.authentication.cookie.domain>>>: The domain to use for the
- HTTP cookie that stores the authentication token. In order to
- authentiation to work correctly across all nodes in the cluster the
- domain must be correctly set. There is no default value, the HTTP
- cookie will not have a domain working only with the hostname issuing
- the HTTP cookie.
-
- IMPORTANT: when using IP addresses, browsers ignore cookies with domain
- settings. For this setting to work properly all nodes in the cluster
- must be configured to generate URLs with <<<hostname.domain>>> names on it.
-
- <<<hadoop.http.authentication.simple.anonymous.allowed>>>: Indicates if
- anonymous requests are allowed when using 'simple' authentication. The
- default value is <<<true>>>
-
- <<<hadoop.http.authentication.kerberos.principal>>>: Indicates the Kerberos
- principal to be used for HTTP endpoint when using 'kerberos'
- authentication. The principal short name must be <<<HTTP>>> per Kerberos HTTP
- SPNEGO specification. The default value is <<<HTTP/_HOST@$LOCALHOST>>>,
- where <<<_HOST>>> -if present- is replaced with bind address of the HTTP
- server.
-
- <<<hadoop.http.authentication.kerberos.keytab>>>: Location of the keytab file
- with the credentials for the Kerberos principal used for the HTTP
- endpoint. The default value is <<<${user.home}/hadoop.keytab>>>.i
-
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/InterfaceClassification.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/InterfaceClassification.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/InterfaceClassification.apt.vm
deleted file mode 100644
index 85e66bd..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/InterfaceClassification.apt.vm
+++ /dev/null
@@ -1,239 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop Interface Taxonomy: Audience and Stability Classification
- ---
- ---
- ${maven.build.timestamp}
-
-Hadoop Interface Taxonomy: Audience and Stability Classification
-
-%{toc|section=1|fromDepth=0}
-
-* Motivation
-
- The interface taxonomy classification provided here is for guidance to
- developers and users of interfaces. The classification guides a developer
- to declare the targeted audience or users of an interface and also its
- stability.
-
- * Benefits to the user of an interface: Knows which interfaces to use or not
- use and their stability.
-
- * Benefits to the developer: to prevent accidental changes of interfaces and
- hence accidental impact on users or other components or system. This is
- particularly useful in large systems with many developers who may not all
- have a shared state/history of the project.
-
-* Interface Classification
-
- Hadoop adopts the following interface classification,
- this classification was derived from the
- {{{http://www.opensolaris.org/os/community/arc/policies/interface-taxonomy/#Advice}OpenSolaris taxonomy}}
- and, to some extent, from taxonomy used inside Yahoo. Interfaces have two main
- attributes: Audience and Stability
-
-** Audience
-
- Audience denotes the potential consumers of the interface. While many
- interfaces are internal/private to the implementation,
- other are public/external interfaces are meant for wider consumption by
- applications and/or clients. For example, in posix, libc is an external or
- public interface, while large parts of the kernel are internal or private
- interfaces. Also, some interfaces are targeted towards other specific
- subsystems.
-
- Identifying the audience of an interface helps define the impact of
- breaking it. For instance, it might be okay to break the compatibility of
- an interface whose audience is a small number of specific subsystems. On
- the other hand, it is probably not okay to break a protocol interfaces
- that millions of Internet users depend on.
-
- Hadoop uses the following kinds of audience in order of
- increasing/wider visibility:
-
- * Private:
-
- * The interface is for internal use within the project (such as HDFS or
- MapReduce) and should not be used by applications or by other projects. It
- is subject to change at anytime without notice. Most interfaces of a
- project are Private (also referred to as project-private).
-
- * Limited-Private:
-
- * The interface is used by a specified set of projects or systems
- (typically closely related projects). Other projects or systems should not
- use the interface. Changes to the interface will be communicated/
- negotiated with the specified projects. For example, in the Hadoop project,
- some interfaces are LimitedPrivate\{HDFS, MapReduce\} in that they
- are private to the HDFS and MapReduce projects.
-
- * Public
-
- * The interface is for general use by any application.
-
- Hadoop doesn't have a Company-Private classification,
- which is meant for APIs which are intended to be used by other projects
- within the company, since it doesn't apply to opensource projects. Also,
- certain APIs are annotated as @VisibleForTesting (from com.google.common
- .annotations.VisibleForTesting) - these are meant to be used strictly for
- unit tests and should be treated as "Private" APIs.
-
-** Stability
-
- Stability denotes how stable an interface is, as in when incompatible
- changes to the interface are allowed. Hadoop APIs have the following
- levels of stability.
-
- * Stable
-
- * Can evolve while retaining compatibility for minor release boundaries;
- in other words, incompatible changes to APIs marked Stable are allowed
- only at major releases (i.e. at m.0).
-
- * Evolving
-
- * Evolving, but incompatible changes are allowed at minor release (i.e. m
- .x)
-
- * Unstable
-
- * Incompatible changes to Unstable APIs are allowed any time. This
- usually makes sense for only private interfaces.
-
- * However one may call this out for a supposedly public interface to
- highlight that it should not be used as an interface; for public
- interfaces, labeling it as Not-an-interface is probably more appropriate
- than "Unstable".
-
- * Examples of publicly visible interfaces that are unstable (i.e.
- not-an-interface): GUI, CLIs whose output format will change
-
- * Deprecated
-
- * APIs that could potentially removed in the future and should not be
- used.
-
-* How are the Classifications Recorded?
-
- How will the classification be recorded for Hadoop APIs?
-
- * Each interface or class will have the audience and stability recorded
- using annotations in org.apache.hadoop.classification package.
-
- * The javadoc generated by the maven target javadoc:javadoc lists only the
- public API.
-
- * One can derive the audience of java classes and java interfaces by the
- audience of the package in which they are contained. Hence it is useful to
- declare the audience of each java package as public or private (along with
- the private audience variations).
-
-* FAQ
-
- * Why aren’t the java scopes (private, package private and public) good
- enough?
-
- * Java’s scoping is not very complete. One is often forced to make a class
- public in order for other internal components to use it. It does not have
- friends or sub-package-private like C++.
-
- * But I can easily access a private implementation interface if it is Java
- public. Where is the protection and control?
-
- * The purpose of this is not providing absolute access control. Its purpose
- is to communicate to users and developers. One can access private
- implementation functions in libc; however if they change the internal
- implementation details, your application will break and you will have little
- sympathy from the folks who are supplying libc. If you use a non-public
- interface you understand the risks.
-
- * Why bother declaring the stability of a private interface? Aren’t private
- interfaces always unstable?
-
- * Private interfaces are not always unstable. In the cases where they are
- stable they capture internal properties of the system and can communicate
- these properties to its internal users and to developers of the interface.
-
- * e.g. In HDFS, NN-DN protocol is private but stable and can help
- implement rolling upgrades. It communicates that this interface should not
- be changed in incompatible ways even though it is private.
-
- * e.g. In HDFS, FSImage stability can help provide more flexible roll
- backs.
-
- * What is the harm in applications using a private interface that is
- stable? How is it different than a public stable interface?
-
- * While a private interface marked as stable is targeted to change only at
- major releases, it may break at other times if the providers of that
- interface are willing to changes the internal users of that interface.
- Further, a public stable interface is less likely to break even at major
- releases (even though it is allowed to break compatibility) because the
- impact of the change is larger. If you use a private interface (regardless
- of its stability) you run the risk of incompatibility.
-
- * Why bother with Limited-private? Isn’t it giving special treatment to some
- projects? That is not fair.
-
- * First, most interfaces should be public or private; actually let us state
- it even stronger: make it private unless you really want to expose it to
- public for general use.
-
- * Limited-private is for interfaces that are not intended for general use.
- They are exposed to related projects that need special hooks. Such a
- classification has a cost to both the supplier and consumer of the limited
- interface. Both will have to work together if ever there is a need to break
- the interface in the future; for example the supplier and the consumers will
- have to work together to get coordinated releases of their respective
- projects. This should not be taken lightly – if you can get away with
- private then do so; if the interface is really for general use for all
- applications then do so. But remember that making an interface public has
- huge responsibility. Sometimes Limited-private is just right.
-
- * A good example of a limited-private interface is BlockLocations, This is
- fairly low-level interface that we are willing to expose to MR and perhaps
- HBase. We are likely to change it down the road and at that time we will
- have get a coordinated effort with the MR team to release matching releases.
- While MR and HDFS are always released in sync today, they may change down
- the road.
-
- * If you have a limited-private interface with many projects listed then
- you are fooling yourself. It is practically public.
-
- * It might be worth declaring a special audience classification called
- Hadoop-Private for the Hadoop family.
-
- * Lets treat all private interfaces as Hadoop-private. What is the harm in
- projects in the Hadoop family have access to private classes?
-
- * Do we want MR accessing class files that are implementation details
- inside HDFS. There used to be many such layer violations in the code that
- we have been cleaning up over the last few years. We don’t want such
- layer violations to creep back in by no separating between the major
- components like HDFS and MR.
-
- * Aren't all public interfaces stable?
-
- * One may mark a public interface as evolving in its early days.
- Here one is promising to make an effort to make compatible changes but may
- need to break it at minor releases.
-
- * One example of a public interface that is unstable is where one is providing
- an implementation of a standards-body based interface that is still under development.
- For example, many companies, in an attampt to be first to market,
- have provided implementations of a new NFS protocol even when the protocol was not
- fully completed by IETF.
- The implementor cannot evolve the interface in a fashion that causes least distruption
- because the stability is controlled by the standards body. Hence it is appropriate to
- label the interface as unstable.
[7/7] hadoop git commit: HADOOP-11495. Convert site documentation
from apt to markdown (Masatake Iwasaki via aw)
Posted by aw...@apache.org.
HADOOP-11495. Convert site documentation from apt to markdown (Masatake Iwasaki via aw)
Project: http://git-wip-us.apache.org/repos/asf/hadoop/repo
Commit: http://git-wip-us.apache.org/repos/asf/hadoop/commit/e9d26fe9
Tree: http://git-wip-us.apache.org/repos/asf/hadoop/tree/e9d26fe9
Diff: http://git-wip-us.apache.org/repos/asf/hadoop/diff/e9d26fe9
Branch: refs/heads/trunk
Commit: e9d26fe9eb16a0482d3581504ecad22b4cd65077
Parents: 6338ce3
Author: Allen Wittenauer <aw...@apache.org>
Authored: Tue Feb 10 13:39:57 2015 -0800
Committer: Allen Wittenauer <aw...@apache.org>
Committed: Tue Feb 10 13:39:57 2015 -0800
----------------------------------------------------------------------
hadoop-common-project/hadoop-common/CHANGES.txt | 3 +
.../src/site/apt/CLIMiniCluster.apt.vm | 83 --
.../src/site/apt/ClusterSetup.apt.vm | 651 --------------
.../src/site/apt/CommandsManual.apt.vm | 327 -------
.../src/site/apt/Compatibility.apt.vm | 541 ------------
.../src/site/apt/DeprecatedProperties.apt.vm | 552 ------------
.../src/site/apt/FileSystemShell.apt.vm | 764 ----------------
.../src/site/apt/HttpAuthentication.apt.vm | 98 ---
.../src/site/apt/InterfaceClassification.apt.vm | 239 -----
.../hadoop-common/src/site/apt/Metrics.apt.vm | 879 -------------------
.../src/site/apt/NativeLibraries.apt.vm | 205 -----
.../src/site/apt/RackAwareness.apt.vm | 140 ---
.../src/site/apt/SecureMode.apt.vm | 689 ---------------
.../src/site/apt/ServiceLevelAuth.apt.vm | 216 -----
.../src/site/apt/SingleCluster.apt.vm | 286 ------
.../src/site/apt/SingleNodeSetup.apt.vm | 24 -
.../src/site/apt/Superusers.apt.vm | 144 ---
.../hadoop-common/src/site/apt/Tracing.apt.vm | 233 -----
.../src/site/markdown/CLIMiniCluster.md.vm | 68 ++
.../src/site/markdown/ClusterSetup.md | 339 +++++++
.../src/site/markdown/CommandsManual.md | 227 +++++
.../src/site/markdown/Compatibility.md | 313 +++++++
.../src/site/markdown/DeprecatedProperties.md | 288 ++++++
.../src/site/markdown/FileSystemShell.md | 689 +++++++++++++++
.../src/site/markdown/HttpAuthentication.md | 58 ++
.../site/markdown/InterfaceClassification.md | 105 +++
.../hadoop-common/src/site/markdown/Metrics.md | 456 ++++++++++
.../src/site/markdown/NativeLibraries.md.vm | 145 +++
.../src/site/markdown/RackAwareness.md | 104 +++
.../src/site/markdown/SecureMode.md | 375 ++++++++
.../src/site/markdown/ServiceLevelAuth.md | 144 +++
.../src/site/markdown/SingleCluster.md.vm | 232 +++++
.../src/site/markdown/SingleNodeSetup.md | 20 +
.../src/site/markdown/Superusers.md | 106 +++
.../hadoop-common/src/site/markdown/Tracing.md | 182 ++++
35 files changed, 3854 insertions(+), 6071 deletions(-)
----------------------------------------------------------------------
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/CHANGES.txt
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/CHANGES.txt b/hadoop-common-project/hadoop-common/CHANGES.txt
index fadc744..1ba93e8 100644
--- a/hadoop-common-project/hadoop-common/CHANGES.txt
+++ b/hadoop-common-project/hadoop-common/CHANGES.txt
@@ -168,6 +168,9 @@ Trunk (Unreleased)
HADOOP-6964. Allow compact property description in xml (Kengo Seki
via aw)
+ HADOOP-11495. Convert site documentation from apt to markdown
+ (Masatake Iwasaki via aw)
+
BUG FIXES
HADOOP-11473. test-patch says "-1 overall" even when all checks are +1
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/CLIMiniCluster.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/CLIMiniCluster.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/CLIMiniCluster.apt.vm
deleted file mode 100644
index 2d12c39..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/CLIMiniCluster.apt.vm
+++ /dev/null
@@ -1,83 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop MapReduce Next Generation ${project.version} - CLI MiniCluster.
- ---
- ---
- ${maven.build.timestamp}
-
-Hadoop MapReduce Next Generation - CLI MiniCluster.
-
-%{toc|section=1|fromDepth=0}
-
-* {Purpose}
-
- Using the CLI MiniCluster, users can simply start and stop a single-node
- Hadoop cluster with a single command, and without the need to set any
- environment variables or manage configuration files. The CLI MiniCluster
- starts both a <<<YARN>>>/<<<MapReduce>>> & <<<HDFS>>> clusters.
-
- This is useful for cases where users want to quickly experiment with a real
- Hadoop cluster or test non-Java programs that rely on significant Hadoop
- functionality.
-
-* {Hadoop Tarball}
-
- You should be able to obtain the Hadoop tarball from the release. Also, you
- can directly create a tarball from the source:
-
-+---+
-$ mvn clean install -DskipTests
-$ mvn package -Pdist -Dtar -DskipTests -Dmaven.javadoc.skip
-+---+
- <<NOTE:>> You will need {{{http://code.google.com/p/protobuf/}protoc 2.5.0}}
- installed.
-
- The tarball should be available in <<<hadoop-dist/target/>>> directory.
-
-* {Running the MiniCluster}
-
- From inside the root directory of the extracted tarball, you can start the CLI
- MiniCluster using the following command:
-
-+---+
-$ bin/hadoop jar ./share/hadoop/mapreduce/hadoop-mapreduce-client-jobclient-${project.version}-tests.jar minicluster -rmport RM_PORT -jhsport JHS_PORT
-+---+
-
- In the example command above, <<<RM_PORT>>> and <<<JHS_PORT>>> should be
- replaced by the user's choice of these port numbers. If not specified, random
- free ports will be used.
-
- There are a number of command line arguments that the users can use to control
- which services to start, and to pass other configuration properties.
- The available command line arguments:
-
-+---+
-$ -D <property=value> Options to pass into configuration object
-$ -datanodes <arg> How many datanodes to start (default 1)
-$ -format Format the DFS (default false)
-$ -help Prints option help.
-$ -jhsport <arg> JobHistoryServer port (default 0--we choose)
-$ -namenode <arg> URL of the namenode (default is either the DFS
-$ cluster or a temporary dir)
-$ -nnport <arg> NameNode port (default 0--we choose)
-$ -nodemanagers <arg> How many nodemanagers to start (default 1)
-$ -nodfs Don't start a mini DFS cluster
-$ -nomr Don't start a mini MR cluster
-$ -rmport <arg> ResourceManager port (default 0--we choose)
-$ -writeConfig <path> Save configuration to this XML file.
-$ -writeDetails <path> Write basic information to this JSON file.
-+---+
-
- To display this full list of available arguments, the user can pass the
- <<<-help>>> argument to the above command.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/ClusterSetup.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/ClusterSetup.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/ClusterSetup.apt.vm
deleted file mode 100644
index 52b0552..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/ClusterSetup.apt.vm
+++ /dev/null
@@ -1,651 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
- Hadoop ${project.version} - Cluster Setup
- ---
- ---
- ${maven.build.timestamp}
-
-%{toc|section=1|fromDepth=0}
-
-Hadoop Cluster Setup
-
-* {Purpose}
-
- This document describes how to install and configure
- Hadoop clusters ranging from a few nodes to extremely large clusters
- with thousands of nodes. To play with Hadoop, you may first want to
- install it on a single machine (see {{{./SingleCluster.html}Single Node Setup}}).
-
- This document does not cover advanced topics such as {{{./SecureMode.html}Security}} or
- High Availability.
-
-* {Prerequisites}
-
- * Install Java. See the {{{http://wiki.apache.org/hadoop/HadoopJavaVersions}Hadoop Wiki}} for known good versions.
- * Download a stable version of Hadoop from Apache mirrors.
-
-* {Installation}
-
- Installing a Hadoop cluster typically involves unpacking the software on all
- the machines in the cluster or installing it via a packaging system as
- appropriate for your operating system. It is important to divide up the hardware
- into functions.
-
- Typically one machine in the cluster is designated as the NameNode and
- another machine the as ResourceManager, exclusively. These are the masters. Other
- services (such as Web App Proxy Server and MapReduce Job History server) are usually
- run either on dedicated hardware or on shared infrastrucutre, depending upon the load.
-
- The rest of the machines in the cluster act as both DataNode and NodeManager.
- These are the slaves.
-
-* {Configuring Hadoop in Non-Secure Mode}
-
- Hadoop's Java configuration is driven by two types of important configuration files:
-
- * Read-only default configuration - <<<core-default.xml>>>,
- <<<hdfs-default.xml>>>, <<<yarn-default.xml>>> and
- <<<mapred-default.xml>>>.
-
- * Site-specific configuration - <<<etc/hadoop/core-site.xml>>>,
- <<<etc/hadoop/hdfs-site.xml>>>, <<<etc/hadoop/yarn-site.xml>>> and
- <<<etc/hadoop/mapred-site.xml>>>.
-
-
- Additionally, you can control the Hadoop scripts found in the bin/
- directory of the distribution, by setting site-specific values via the
- <<<etc/hadoop/hadoop-env.sh>>> and <<<etc/hadoop/yarn-env.sh>>>.
-
- To configure the Hadoop cluster you will need to configure the
- <<<environment>>> in which the Hadoop daemons execute as well as the
- <<<configuration parameters>>> for the Hadoop daemons.
-
- HDFS daemons are NameNode, SecondaryNameNode, and DataNode. YARN damones
- are ResourceManager, NodeManager, and WebAppProxy. If MapReduce is to be
- used, then the MapReduce Job History Server will also be running. For
- large installations, these are generally running on separate hosts.
-
-
-** {Configuring Environment of Hadoop Daemons}
-
- Administrators should use the <<<etc/hadoop/hadoop-env.sh>>> and optionally the
- <<<etc/hadoop/mapred-env.sh>>> and <<<etc/hadoop/yarn-env.sh>>> scripts to do
- site-specific customization of the Hadoop daemons' process environment.
-
- At the very least, you must specify the <<<JAVA_HOME>>> so that it is
- correctly defined on each remote node.
-
- Administrators can configure individual daemons using the configuration
- options shown below in the table:
-
-*--------------------------------------+--------------------------------------+
-|| Daemon || Environment Variable |
-*--------------------------------------+--------------------------------------+
-| NameNode | HADOOP_NAMENODE_OPTS |
-*--------------------------------------+--------------------------------------+
-| DataNode | HADOOP_DATANODE_OPTS |
-*--------------------------------------+--------------------------------------+
-| Secondary NameNode | HADOOP_SECONDARYNAMENODE_OPTS |
-*--------------------------------------+--------------------------------------+
-| ResourceManager | YARN_RESOURCEMANAGER_OPTS |
-*--------------------------------------+--------------------------------------+
-| NodeManager | YARN_NODEMANAGER_OPTS |
-*--------------------------------------+--------------------------------------+
-| WebAppProxy | YARN_PROXYSERVER_OPTS |
-*--------------------------------------+--------------------------------------+
-| Map Reduce Job History Server | HADOOP_JOB_HISTORYSERVER_OPTS |
-*--------------------------------------+--------------------------------------+
-
-
- For example, To configure Namenode to use parallelGC, the following
- statement should be added in hadoop-env.sh :
-
-----
- export HADOOP_NAMENODE_OPTS="-XX:+UseParallelGC"
-----
-
- See <<<etc/hadoop/hadoop-env.sh>>> for other examples.
-
- Other useful configuration parameters that you can customize include:
-
- * <<<HADOOP_PID_DIR>>> - The directory where the
- daemons' process id files are stored.
-
- * <<<HADOOP_LOG_DIR>>> - The directory where the
- daemons' log files are stored. Log files are automatically created
- if they don't exist.
-
- * <<<HADOOP_HEAPSIZE_MAX>>> - The maximum amount of
- memory to use for the Java heapsize. Units supported by the JVM
- are also supported here. If no unit is present, it will be assumed
- the number is in megabytes. By default, Hadoop will let the JVM
- determine how much to use. This value can be overriden on
- a per-daemon basis using the appropriate <<<_OPTS>>> variable listed above.
- For example, setting <<<HADOOP_HEAPSIZE_MAX=1g>>> and
- <<<HADOOP_NAMENODE_OPTS="-Xmx5g">>> will configure the NameNode with 5GB heap.
-
- In most cases, you should specify the <<<HADOOP_PID_DIR>>> and
- <<<HADOOP_LOG_DIR>>> directories such that they can only be
- written to by the users that are going to run the hadoop daemons.
- Otherwise there is the potential for a symlink attack.
-
- It is also traditional to configure <<<HADOOP_PREFIX>>> in the system-wide
- shell environment configuration. For example, a simple script inside
- <<</etc/profile.d>>>:
-
----
- HADOOP_PREFIX=/path/to/hadoop
- export HADOOP_PREFIX
----
-
-*--------------------------------------+--------------------------------------+
-|| Daemon || Environment Variable |
-*--------------------------------------+--------------------------------------+
-| ResourceManager | YARN_RESOURCEMANAGER_HEAPSIZE |
-*--------------------------------------+--------------------------------------+
-| NodeManager | YARN_NODEMANAGER_HEAPSIZE |
-*--------------------------------------+--------------------------------------+
-| WebAppProxy | YARN_PROXYSERVER_HEAPSIZE |
-*--------------------------------------+--------------------------------------+
-| Map Reduce Job History Server | HADOOP_JOB_HISTORYSERVER_HEAPSIZE |
-*--------------------------------------+--------------------------------------+
-
-** {Configuring the Hadoop Daemons}
-
- This section deals with important parameters to be specified in
- the given configuration files:
-
- * <<<etc/hadoop/core-site.xml>>>
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<fs.defaultFS>>> | NameNode URI | <hdfs://host:port/> |
-*-------------------------+-------------------------+------------------------+
-| <<<io.file.buffer.size>>> | 131072 | |
-| | | Size of read/write buffer used in SequenceFiles. |
-*-------------------------+-------------------------+------------------------+
-
- * <<<etc/hadoop/hdfs-site.xml>>>
-
- * Configurations for NameNode:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.name.dir>>> | | |
-| | Path on the local filesystem where the NameNode stores the namespace | |
-| | and transactions logs persistently. | |
-| | | If this is a comma-delimited list of directories then the name table is |
-| | | replicated in all of the directories, for redundancy. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.hosts>>> / <<<dfs.namenode.hosts.exclude>>> | | |
-| | List of permitted/excluded DataNodes. | |
-| | | If necessary, use these files to control the list of allowable |
-| | | datanodes. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.blocksize>>> | 268435456 | |
-| | | HDFS blocksize of 256MB for large file-systems. |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.namenode.handler.count>>> | 100 | |
-| | | More NameNode server threads to handle RPCs from large number of |
-| | | DataNodes. |
-*-------------------------+-------------------------+------------------------+
-
- * Configurations for DataNode:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<dfs.datanode.data.dir>>> | | |
-| | Comma separated list of paths on the local filesystem of a | |
-| | <<<DataNode>>> where it should store its blocks. | |
-| | | If this is a comma-delimited list of directories, then data will be |
-| | | stored in all named directories, typically on different devices. |
-*-------------------------+-------------------------+------------------------+
-
- * <<<etc/hadoop/yarn-site.xml>>>
-
- * Configurations for ResourceManager and NodeManager:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.acl.enable>>> | | |
-| | <<<true>>> / <<<false>>> | |
-| | | Enable ACLs? Defaults to <false>. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.admin.acl>>> | | |
-| | Admin ACL | |
-| | | ACL to set admins on the cluster. |
-| | | ACLs are of for <comma-separated-users><space><comma-separated-groups>. |
-| | | Defaults to special value of <<*>> which means <anyone>. |
-| | | Special value of just <space> means no one has access. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.log-aggregation-enable>>> | | |
-| | <false> | |
-| | | Configuration to enable or disable log aggregation |
-*-------------------------+-------------------------+------------------------+
-
-
- * Configurations for ResourceManager:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.address>>> | | |
-| | <<<ResourceManager>>> host:port for clients to submit jobs. | |
-| | | <host:port>\ |
-| | | If set, overrides the hostname set in <<<yarn.resourcemanager.hostname>>>. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.scheduler.address>>> | | |
-| | <<<ResourceManager>>> host:port for ApplicationMasters to talk to | |
-| | Scheduler to obtain resources. | |
-| | | <host:port>\ |
-| | | If set, overrides the hostname set in <<<yarn.resourcemanager.hostname>>>. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.resource-tracker.address>>> | | |
-| | <<<ResourceManager>>> host:port for NodeManagers. | |
-| | | <host:port>\ |
-| | | If set, overrides the hostname set in <<<yarn.resourcemanager.hostname>>>. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.admin.address>>> | | |
-| | <<<ResourceManager>>> host:port for administrative commands. | |
-| | | <host:port>\ |
-| | | If set, overrides the hostname set in <<<yarn.resourcemanager.hostname>>>. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.webapp.address>>> | | |
-| | <<<ResourceManager>>> web-ui host:port. | |
-| | | <host:port>\ |
-| | | If set, overrides the hostname set in <<<yarn.resourcemanager.hostname>>>. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.hostname>>> | | |
-| | <<<ResourceManager>>> host. | |
-| | | <host>\ |
-| | | Single hostname that can be set in place of setting all <<<yarn.resourcemanager*address>>> resources. Results in default ports for ResourceManager components. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.scheduler.class>>> | | |
-| | <<<ResourceManager>>> Scheduler class. | |
-| | | <<<CapacityScheduler>>> (recommended), <<<FairScheduler>>> (also recommended), or <<<FifoScheduler>>> |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.scheduler.minimum-allocation-mb>>> | | |
-| | Minimum limit of memory to allocate to each container request at the <<<Resource Manager>>>. | |
-| | | In MBs |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.scheduler.maximum-allocation-mb>>> | | |
-| | Maximum limit of memory to allocate to each container request at the <<<Resource Manager>>>. | |
-| | | In MBs |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.resourcemanager.nodes.include-path>>> / | | |
-| <<<yarn.resourcemanager.nodes.exclude-path>>> | | |
-| | List of permitted/excluded NodeManagers. | |
-| | | If necessary, use these files to control the list of allowable |
-| | | NodeManagers. |
-*-------------------------+-------------------------+------------------------+
-
- * Configurations for NodeManager:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.resource.memory-mb>>> | | |
-| | Resource i.e. available physical memory, in MB, for given <<<NodeManager>>> | |
-| | | Defines total available resources on the <<<NodeManager>>> to be made |
-| | | available to running containers |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.vmem-pmem-ratio>>> | | |
-| | Maximum ratio by which virtual memory usage of tasks may exceed |
-| | physical memory | |
-| | | The virtual memory usage of each task may exceed its physical memory |
-| | | limit by this ratio. The total amount of virtual memory used by tasks |
-| | | on the NodeManager may exceed its physical memory usage by this ratio. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.local-dirs>>> | | |
-| | Comma-separated list of paths on the local filesystem where | |
-| | intermediate data is written. ||
-| | | Multiple paths help spread disk i/o. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.log-dirs>>> | | |
-| | Comma-separated list of paths on the local filesystem where logs | |
-| | are written. | |
-| | | Multiple paths help spread disk i/o. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.log.retain-seconds>>> | | |
-| | <10800> | |
-| | | Default time (in seconds) to retain log files on the NodeManager |
-| | | Only applicable if log-aggregation is disabled. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.remote-app-log-dir>>> | | |
-| | </logs> | |
-| | | HDFS directory where the application logs are moved on application |
-| | | completion. Need to set appropriate permissions. |
-| | | Only applicable if log-aggregation is enabled. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.remote-app-log-dir-suffix>>> | | |
-| | <logs> | |
-| | | Suffix appended to the remote log dir. Logs will be aggregated to |
-| | | $\{yarn.nodemanager.remote-app-log-dir\}/$\{user\}/$\{thisParam\} |
-| | | Only applicable if log-aggregation is enabled. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.aux-services>>> | | |
-| | mapreduce_shuffle | |
-| | | Shuffle service that needs to be set for Map Reduce applications. |
-*-------------------------+-------------------------+------------------------+
-
- * Configurations for History Server (Needs to be moved elsewhere):
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.log-aggregation.retain-seconds>>> | | |
-| | <-1> | |
-| | | How long to keep aggregation logs before deleting them. -1 disables. |
-| | | Be careful, set this too small and you will spam the name node. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.log-aggregation.retain-check-interval-seconds>>> | | |
-| | <-1> | |
-| | | Time between checks for aggregated log retention. If set to 0 or a |
-| | | negative value then the value is computed as one-tenth of the |
-| | | aggregated log retention time. |
-| | | Be careful, set this too small and you will spam the name node. |
-*-------------------------+-------------------------+------------------------+
-
- * <<<etc/hadoop/mapred-site.xml>>>
-
- * Configurations for MapReduce Applications:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.framework.name>>> | | |
-| | yarn | |
-| | | Execution framework set to Hadoop YARN. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.map.memory.mb>>> | 1536 | |
-| | | Larger resource limit for maps. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.map.java.opts>>> | -Xmx1024M | |
-| | | Larger heap-size for child jvms of maps. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.reduce.memory.mb>>> | 3072 | |
-| | | Larger resource limit for reduces. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.reduce.java.opts>>> | -Xmx2560M | |
-| | | Larger heap-size for child jvms of reduces. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.task.io.sort.mb>>> | 512 | |
-| | | Higher memory-limit while sorting data for efficiency. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.task.io.sort.factor>>> | 100 | |
-| | | More streams merged at once while sorting files. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.reduce.shuffle.parallelcopies>>> | 50 | |
-| | | Higher number of parallel copies run by reduces to fetch outputs |
-| | | from very large number of maps. |
-*-------------------------+-------------------------+------------------------+
-
- * Configurations for MapReduce JobHistory Server:
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.address>>> | | |
-| | MapReduce JobHistory Server <host:port> | Default port is 10020. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.webapp.address>>> | | |
-| | MapReduce JobHistory Server Web UI <host:port> | Default port is 19888. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.intermediate-done-dir>>> | /mr-history/tmp | |
-| | | Directory where history files are written by MapReduce jobs. |
-*-------------------------+-------------------------+------------------------+
-| <<<mapreduce.jobhistory.done-dir>>> | /mr-history/done| |
-| | | Directory where history files are managed by the MR JobHistory Server. |
-*-------------------------+-------------------------+------------------------+
-
-* {Monitoring Health of NodeManagers}
-
- Hadoop provides a mechanism by which administrators can configure the
- NodeManager to run an administrator supplied script periodically to
- determine if a node is healthy or not.
-
- Administrators can determine if the node is in a healthy state by
- performing any checks of their choice in the script. If the script
- detects the node to be in an unhealthy state, it must print a line to
- standard output beginning with the string ERROR. The NodeManager spawns
- the script periodically and checks its output. If the script's output
- contains the string ERROR, as described above, the node's status is
- reported as <<<unhealthy>>> and the node is black-listed by the
- ResourceManager. No further tasks will be assigned to this node.
- However, the NodeManager continues to run the script, so that if the
- node becomes healthy again, it will be removed from the blacklisted nodes
- on the ResourceManager automatically. The node's health along with the
- output of the script, if it is unhealthy, is available to the
- administrator in the ResourceManager web interface. The time since the
- node was healthy is also displayed on the web interface.
-
- The following parameters can be used to control the node health
- monitoring script in <<<etc/hadoop/yarn-site.xml>>>.
-
-*-------------------------+-------------------------+------------------------+
-|| Parameter || Value || Notes |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.health-checker.script.path>>> | | |
-| | Node health script | |
-| | | Script to check for node's health status. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.health-checker.script.opts>>> | | |
-| | Node health script options | |
-| | | Options for script to check for node's health status. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.health-checker.script.interval-ms>>> | | |
-| | Node health script interval | |
-| | | Time interval for running health script. |
-*-------------------------+-------------------------+------------------------+
-| <<<yarn.nodemanager.health-checker.script.timeout-ms>>> | | |
-| | Node health script timeout interval | |
-| | | Timeout for health script execution. |
-*-------------------------+-------------------------+------------------------+
-
- The health checker script is not supposed to give ERROR if only some of the
- local disks become bad. NodeManager has the ability to periodically check
- the health of the local disks (specifically checks nodemanager-local-dirs
- and nodemanager-log-dirs) and after reaching the threshold of number of
- bad directories based on the value set for the config property
- yarn.nodemanager.disk-health-checker.min-healthy-disks, the whole node is
- marked unhealthy and this info is sent to resource manager also. The boot
- disk is either raided or a failure in the boot disk is identified by the
- health checker script.
-
-* {Slaves File}
-
- List all slave hostnames or IP addresses in your <<<etc/hadoop/slaves>>>
- file, one per line. Helper scripts (described below) will use the
- <<<etc/hadoop/slaves>>> file to run commands on many hosts at once. It is not
- used for any of the Java-based Hadoop configuration. In order
- to use this functionality, ssh trusts (via either passphraseless ssh or
- some other means, such as Kerberos) must be established for the accounts
- used to run Hadoop.
-
-* {Hadoop Rack Awareness}
-
- Many Hadoop components are rack-aware and take advantage of the
- network topology for performance and safety. Hadoop daemons obtain the
- rack information of the slaves in the cluster by invoking an administrator
- configured module. See the {{{./RackAwareness.html}Rack Awareness}}
- documentation for more specific information.
-
- It is highly recommended configuring rack awareness prior to starting HDFS.
-
-* {Logging}
-
- Hadoop uses the {{{http://logging.apache.org/log4j/2.x/}Apache log4j}} via the Apache Commons Logging framework for
- logging. Edit the <<<etc/hadoop/log4j.properties>>> file to customize the
- Hadoop daemons' logging configuration (log-formats and so on).
-
-* {Operating the Hadoop Cluster}
-
- Once all the necessary configuration is complete, distribute the files to the
- <<<HADOOP_CONF_DIR>>> directory on all the machines. This should be the
- same directory on all machines.
-
- In general, it is recommended that HDFS and YARN run as separate users.
- In the majority of installations, HDFS processes execute as 'hdfs'. YARN
- is typically using the 'yarn' account.
-
-** Hadoop Startup
-
- To start a Hadoop cluster you will need to start both the HDFS and YARN
- cluster.
-
- The first time you bring up HDFS, it must be formatted. Format a new
- distributed filesystem as <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/bin/hdfs namenode -format <cluster_name>
-----
-
- Start the HDFS NameNode with the following command on the
- designated node as <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon start namenode
-----
-
- Start a HDFS DataNode with the following command on each
- designated node as <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon start datanode
-----
-
- If <<<etc/hadoop/slaves>>> and ssh trusted access is configured
- (see {{{./SingleCluster.html}Single Node Setup}}), all of the
- HDFS processes can be started with a utility script. As <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/sbin/start-dfs.sh
-----
-
- Start the YARN with the following command, run on the designated
- ResourceManager as <yarn>:
-
-----
-[yarn]$ $HADOOP_PREFIX/bin/yarn --daemon start resourcemanager
-----
-
- Run a script to start a NodeManager on each designated host as <yarn>:
-
-----
-[yarn]$ $HADOOP_PREFIX/bin/yarn --daemon start nodemanager
-----
-
- Start a standalone WebAppProxy server. Run on the WebAppProxy
- server as <yarn>. If multiple servers are used with load balancing
- it should be run on each of them:
-
-----
-[yarn]$ $HADOOP_PREFIX/bin/yarn --daemon start proxyserver
-----
-
- If <<<etc/hadoop/slaves>>> and ssh trusted access is configured
- (see {{{./SingleCluster.html}Single Node Setup}}), all of the
- YARN processes can be started with a utility script. As <yarn>:
-
-----
-[yarn]$ $HADOOP_PREFIX/sbin/start-yarn.sh
-----
-
- Start the MapReduce JobHistory Server with the following command, run
- on the designated server as <mapred>:
-
-----
-[mapred]$ $HADOOP_PREFIX/bin/mapred --daemon start historyserver
-----
-
-** Hadoop Shutdown
-
- Stop the NameNode with the following command, run on the designated NameNode
- as <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon stop namenode
-----
-
- Run a script to stop a DataNode as <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/bin/hdfs --daemon stop datanode
-----
-
- If <<<etc/hadoop/slaves>>> and ssh trusted access is configured
- (see {{{./SingleCluster.html}Single Node Setup}}), all of the
- HDFS processes may be stopped with a utility script. As <hdfs>:
-
-----
-[hdfs]$ $HADOOP_PREFIX/sbin/stop-dfs.sh
-----
-
- Stop the ResourceManager with the following command, run on the designated
- ResourceManager as <yarn>:
-
-----
-[yarn]$ $HADOOP_PREFIX/bin/yarn --daemon stop resourcemanager
-----
-
- Run a script to stop a NodeManager on a slave as <yarn>:
-
-----
-[yarn]$ $HADOOP_PREFIX/bin/yarn --daemon stop nodemanager
-----
-
- If <<<etc/hadoop/slaves>>> and ssh trusted access is configured
- (see {{{./SingleCluster.html}Single Node Setup}}), all of the
- YARN processes can be stopped with a utility script. As <yarn>:
-
-----
-[yarn]$ $HADOOP_PREFIX/sbin/stop-yarn.sh
-----
-
- Stop the WebAppProxy server. Run on the WebAppProxy server as
- <yarn>. If multiple servers are used with load balancing it
- should be run on each of them:
-
-----
-[yarn]$ $HADOOP_PREFIX/bin/yarn stop proxyserver
-----
-
- Stop the MapReduce JobHistory Server with the following command, run on the
- designated server as <mapred>:
-
-----
-[mapred]$ $HADOOP_PREFIX/bin/mapred --daemon stop historyserver
-----
-
-* {Web Interfaces}
-
- Once the Hadoop cluster is up and running check the web-ui of the
- components as described below:
-
-*-------------------------+-------------------------+------------------------+
-|| Daemon || Web Interface || Notes |
-*-------------------------+-------------------------+------------------------+
-| NameNode | http://<nn_host:port>/ | Default HTTP port is 50070. |
-*-------------------------+-------------------------+------------------------+
-| ResourceManager | http://<rm_host:port>/ | Default HTTP port is 8088. |
-*-------------------------+-------------------------+------------------------+
-| MapReduce JobHistory Server | http://<jhs_host:port>/ | |
-| | | Default HTTP port is 19888. |
-*-------------------------+-------------------------+------------------------+
-
-
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/CommandsManual.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/CommandsManual.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/CommandsManual.apt.vm
deleted file mode 100644
index 67c8bc3..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/CommandsManual.apt.vm
+++ /dev/null
@@ -1,327 +0,0 @@
-~~ Licensed to the Apache Software Foundation (ASF) under one or more
-~~ contributor license agreements. See the NOTICE file distributed with
-~~ this work for additional information regarding copyright ownership.
-~~ The ASF licenses this file to You under the Apache License, Version 2.0
-~~ (the "License"); you may not use this file except in compliance with
-~~ the License. You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License.
-
- ---
- Hadoop Commands Guide
- ---
- ---
- ${maven.build.timestamp}
-
-%{toc}
-
-Hadoop Commands Guide
-
-* Overview
-
- All of the Hadoop commands and subprojects follow the same basic structure:
-
- Usage: <<<shellcommand [SHELL_OPTIONS] [COMMAND] [GENERIC_OPTIONS] [COMMAND_OPTIONS]>>>
-
-*--------+---------+
-|| FIELD || Description
-*-----------------------+---------------+
-| shellcommand | The command of the project being invoked. For example,
- | Hadoop common uses <<<hadoop>>>, HDFS uses <<<hdfs>>>,
- | and YARN uses <<<yarn>>>.
-*---------------+-------------------+
-| SHELL_OPTIONS | Options that the shell processes prior to executing Java.
-*-----------------------+---------------+
-| COMMAND | Action to perform.
-*-----------------------+---------------+
-| GENERIC_OPTIONS | The common set of options supported by
- | multiple commands.
-*-----------------------+---------------+
-| COMMAND_OPTIONS | Various commands with their options are
- | described in this documention for the
- | Hadoop common sub-project. HDFS and YARN are
- | covered in other documents.
-*-----------------------+---------------+
-
-** {Shell Options}
-
- All of the shell commands will accept a common set of options. For some commands,
- these options are ignored. For example, passing <<<---hostnames>>> on a
- command that only executes on a single host will be ignored.
-
-*-----------------------+---------------+
-|| SHELL_OPTION || Description
-*-----------------------+---------------+
-| <<<--buildpaths>>> | Enables developer versions of jars.
-*-----------------------+---------------+
-| <<<--config confdir>>> | Overwrites the default Configuration
- | directory. Default is <<<${HADOOP_PREFIX}/conf>>>.
-*-----------------------+----------------+
-| <<<--daemon mode>>> | If the command supports daemonization (e.g.,
- | <<<hdfs namenode>>>), execute in the appropriate
- | mode. Supported modes are <<<start>>> to start the
- | process in daemon mode, <<<stop>>> to stop the
- | process, and <<<status>>> to determine the active
- | status of the process. <<<status>>> will return
- | an {{{http://refspecs.linuxbase.org/LSB_3.0.0/LSB-generic/LSB-generic/iniscrptact.html}LSB-compliant}} result code.
- | If no option is provided, commands that support
- | daemonization will run in the foreground.
-*-----------------------+---------------+
-| <<<--debug>>> | Enables shell level configuration debugging information
-*-----------------------+---------------+
-| <<<--help>>> | Shell script usage information.
-*-----------------------+---------------+
-| <<<--hostnames>>> | A space delimited list of hostnames where to execute
- | a multi-host subcommand. By default, the content of
- | the <<<slaves>>> file is used.
-*-----------------------+----------------+
-| <<<--hosts>>> | A file that contains a list of hostnames where to execute
- | a multi-host subcommand. By default, the content of the
- | <<<slaves>>> file is used.
-*-----------------------+----------------+
-| <<<--loglevel loglevel>>> | Overrides the log level. Valid log levels are
-| | FATAL, ERROR, WARN, INFO, DEBUG, and TRACE.
-| | Default is INFO.
-*-----------------------+---------------+
-
-** {Generic Options}
-
- Many subcommands honor a common set of configuration options to alter their behavior:
-
-*------------------------------------------------+-----------------------------+
-|| GENERIC_OPTION || Description
-*------------------------------------------------+-----------------------------+
-|<<<-archives \<comma separated list of archives\> >>> | Specify comma separated
- | archives to be unarchived on
- | the compute machines. Applies
- | only to job.
-*------------------------------------------------+-----------------------------+
-|<<<-conf \<configuration file\> >>> | Specify an application
- | configuration file.
-*------------------------------------------------+-----------------------------+
-|<<<-D \<property\>=\<value\> >>> | Use value for given property.
-*------------------------------------------------+-----------------------------+
-|<<<-files \<comma separated list of files\> >>> | Specify comma separated files
- | to be copied to the map
- | reduce cluster. Applies only
- | to job.
-*------------------------------------------------+-----------------------------+
-|<<<-jt \<local\> or \<resourcemanager:port\>>>> | Specify a ResourceManager.
- | Applies only to job.
-*------------------------------------------------+-----------------------------+
-|<<<-libjars \<comma seperated list of jars\> >>>| Specify comma separated jar
- | files to include in the
- | classpath. Applies only to
- | job.
-*------------------------------------------------+-----------------------------+
-
-Hadoop Common Commands
-
- All of these commands are executed from the <<<hadoop>>> shell command. They
- have been broken up into {{User Commands}} and
- {{Admininistration Commands}}.
-
-* User Commands
-
- Commands useful for users of a hadoop cluster.
-
-** <<<archive>>>
-
- Creates a hadoop archive. More information can be found at
- {{{../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/HadoopArchives.html}
- Hadoop Archives Guide}}.
-
-** <<<checknative>>>
-
- Usage: <<<hadoop checknative [-a] [-h] >>>
-
-*-----------------+-----------------------------------------------------------+
-|| COMMAND_OPTION || Description
-*-----------------+-----------------------------------------------------------+
-| -a | Check all libraries are available.
-*-----------------+-----------------------------------------------------------+
-| -h | print help
-*-----------------+-----------------------------------------------------------+
-
- This command checks the availability of the Hadoop native code. See
- {{{NativeLibraries.html}}} for more information. By default, this command
- only checks the availability of libhadoop.
-
-** <<<classpath>>>
-
- Usage: <<<hadoop classpath [--glob|--jar <path>|-h|--help]>>>
-
-*-----------------+-----------------------------------------------------------+
-|| COMMAND_OPTION || Description
-*-----------------+-----------------------------------------------------------+
-| --glob | expand wildcards
-*-----------------+-----------------------------------------------------------+
-| --jar <path> | write classpath as manifest in jar named <path>
-*-----------------+-----------------------------------------------------------+
-| -h, --help | print help
-*-----------------+-----------------------------------------------------------+
-
- Prints the class path needed to get the Hadoop jar and the required
- libraries. If called without arguments, then prints the classpath set up by
- the command scripts, which is likely to contain wildcards in the classpath
- entries. Additional options print the classpath after wildcard expansion or
- write the classpath into the manifest of a jar file. The latter is useful in
- environments where wildcards cannot be used and the expanded classpath exceeds
- the maximum supported command line length.
-
-** <<<credential>>>
-
- Usage: <<<hadoop credential <subcommand> [options]>>>
-
-*-------------------+-------------------------------------------------------+
-||COMMAND_OPTION || Description
-*-------------------+-------------------------------------------------------+
-| create <alias> [-v <value>][-provider <provider-path>]| Prompts the user for
- | a credential to be stored as the given alias when a value
- | is not provided via <<<-v>>>. The
- | <hadoop.security.credential.provider.path> within the
- | core-site.xml file will be used unless a <<<-provider>>> is
- | indicated.
-*-------------------+-------------------------------------------------------+
-| delete <alias> [-i][-provider <provider-path>] | Deletes the credential with
- | the provided alias and optionally warns the user when
- | <<<--interactive>>> is used.
- | The <hadoop.security.credential.provider.path> within the
- | core-site.xml file will be used unless a <<<-provider>>> is
- | indicated.
-*-------------------+-------------------------------------------------------+
-| list [-provider <provider-path>] | Lists all of the credential aliases
- | The <hadoop.security.credential.provider.path> within the
- | core-site.xml file will be used unless a <<<-provider>>> is
- | indicated.
-*-------------------+-------------------------------------------------------+
-
- Command to manage credentials, passwords and secrets within credential providers.
-
- The CredentialProvider API in Hadoop allows for the separation of applications
- and how they store their required passwords/secrets. In order to indicate
- a particular provider type and location, the user must provide the
- <hadoop.security.credential.provider.path> configuration element in core-site.xml
- or use the command line option <<<-provider>>> on each of the following commands.
- This provider path is a comma-separated list of URLs that indicates the type and
- location of a list of providers that should be consulted. For example, the following path:
- <<<user:///,jceks://file/tmp/test.jceks,jceks://hdfs@nn1.example.com/my/path/test.jceks>>>
-
- indicates that the current user's credentials file should be consulted through
- the User Provider, that the local file located at <<</tmp/test.jceks>>> is a Java Keystore
- Provider and that the file located within HDFS at <<<nn1.example.com/my/path/test.jceks>>>
- is also a store for a Java Keystore Provider.
-
- When utilizing the credential command it will often be for provisioning a password
- or secret to a particular credential store provider. In order to explicitly
- indicate which provider store to use the <<<-provider>>> option should be used. Otherwise,
- given a path of multiple providers, the first non-transient provider will be used.
- This may or may not be the one that you intended.
-
- Example: <<<-provider jceks://file/tmp/test.jceks>>>
-
-** <<<distch>>>
-
- Usage: <<<hadoop distch [-f urilist_url] [-i] [-log logdir] path:owner:group:permissions>>>
-
-*-------------------+-------------------------------------------------------+
-||COMMAND_OPTION || Description
-*-------------------+-------------------------------------------------------+
-| -f | List of objects to change
-*----+------------+
-| -i | Ignore failures
-*----+------------+
-| -log | Directory to log output
-*-----+---------+
-
- Change the ownership and permissions on many files at once.
-
-** <<<distcp>>>
-
- Copy file or directories recursively. More information can be found at
- {{{../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/DistCp.html}
- Hadoop DistCp Guide}}.
-
-** <<<fs>>>
-
- This command is documented in the {{{./FileSystemShell.html}File System Shell Guide}}. It is a synonym for <<<hdfs dfs>>> when HDFS is in use.
-
-** <<<jar>>>
-
- Usage: <<<hadoop jar <jar> [mainClass] args...>>>
-
- Runs a jar file.
-
- Use {{{../../hadoop-yarn/hadoop-yarn-site/YarnCommands.html#jar}<<<yarn jar>>>}}
- to launch YARN applications instead.
-
-** <<<jnipath>>>
-
- Usage: <<<hadoop jnipath>>>
-
- Print the computed java.library.path.
-
-** <<<key>>>
-
- Manage keys via the KeyProvider.
-
-** <<<trace>>>
-
- View and modify Hadoop tracing settings. See the {{{./Tracing.html}Tracing Guide}}.
-
-** <<<version>>>
-
- Usage: <<<hadoop version>>>
-
- Prints the version.
-
-** <<<CLASSNAME>>>
-
- Usage: <<<hadoop CLASSNAME>>>
-
- Runs the class named <<<CLASSNAME>>>. The class must be part of a package.
-
-* {Administration Commands}
-
- Commands useful for administrators of a hadoop cluster.
-
-** <<<daemonlog>>>
-
- Usage: <<<hadoop daemonlog -getlevel <host:port> <name> >>>
- Usage: <<<hadoop daemonlog -setlevel <host:port> <name> <level> >>>
-
-*------------------------------+-----------------------------------------------------------+
-|| COMMAND_OPTION || Description
-*------------------------------+-----------------------------------------------------------+
-| -getlevel <host:port> <name> | Prints the log level of the daemon running at
- | <host:port>. This command internally connects
- | to http://<host:port>/logLevel?log=<name>
-*------------------------------+-----------------------------------------------------------+
-| -setlevel <host:port> <name> <level> | Sets the log level of the daemon
- | running at <host:port>. This command internally
- | connects to http://<host:port>/logLevel?log=<name>
-*------------------------------+-----------------------------------------------------------+
-
- Get/Set the log level for each daemon.
-
-* Files
-
-** <<etc/hadoop/hadoop-env.sh>>
-
- This file stores the global settings used by all Hadoop shell commands.
-
-** <<etc/hadoop/hadoop-user-functions.sh>>
-
- This file allows for advanced users to override some shell functionality.
-
-** <<~/.hadooprc>>
-
- This stores the personal environment for an individual user. It is
- processed after the hadoop-env.sh and hadoop-user-functions.sh files
- and can contain the same settings.
http://git-wip-us.apache.org/repos/asf/hadoop/blob/e9d26fe9/hadoop-common-project/hadoop-common/src/site/apt/Compatibility.apt.vm
----------------------------------------------------------------------
diff --git a/hadoop-common-project/hadoop-common/src/site/apt/Compatibility.apt.vm b/hadoop-common-project/hadoop-common/src/site/apt/Compatibility.apt.vm
deleted file mode 100644
index 98d1f57..0000000
--- a/hadoop-common-project/hadoop-common/src/site/apt/Compatibility.apt.vm
+++ /dev/null
@@ -1,541 +0,0 @@
-~~ Licensed under the Apache License, Version 2.0 (the "License");
-~~ you may not use this file except in compliance with the License.
-~~ You may obtain a copy of the License at
-~~
-~~ http://www.apache.org/licenses/LICENSE-2.0
-~~
-~~ Unless required by applicable law or agreed to in writing, software
-~~ distributed under the License is distributed on an "AS IS" BASIS,
-~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-~~ See the License for the specific language governing permissions and
-~~ limitations under the License. See accompanying LICENSE file.
-
- ---
-Apache Hadoop Compatibility
- ---
- ---
- ${maven.build.timestamp}
-
-Apache Hadoop Compatibility
-
-%{toc|section=1|fromDepth=0}
-
-* Purpose
-
- This document captures the compatibility goals of the Apache Hadoop
- project. The different types of compatibility between Hadoop
- releases that affects Hadoop developers, downstream projects, and
- end-users are enumerated. For each type of compatibility we:
-
- * describe the impact on downstream projects or end-users
-
- * where applicable, call out the policy adopted by the Hadoop
- developers when incompatible changes are permitted.
-
-* Compatibility types
-
-** Java API
-
- Hadoop interfaces and classes are annotated to describe the intended
- audience and stability in order to maintain compatibility with previous
- releases. See {{{./InterfaceClassification.html}Hadoop Interface
- Classification}}
- for details.
-
- * InterfaceAudience: captures the intended audience, possible
- values are Public (for end users and external projects),
- LimitedPrivate (for other Hadoop components, and closely related
- projects like YARN, MapReduce, HBase etc.), and Private (for intra component
- use).
-
- * InterfaceStability: describes what types of interface changes are
- permitted. Possible values are Stable, Evolving, Unstable, and Deprecated.
-
-*** Use Cases
-
- * Public-Stable API compatibility is required to ensure end-user programs
- and downstream projects continue to work without modification.
-
- * LimitedPrivate-Stable API compatibility is required to allow upgrade of
- individual components across minor releases.
-
- * Private-Stable API compatibility is required for rolling upgrades.
-
-*** Policy
-
- * Public-Stable APIs must be deprecated for at least one major release
- prior to their removal in a major release.
-
- * LimitedPrivate-Stable APIs can change across major releases,
- but not within a major release.
-
- * Private-Stable APIs can change across major releases,
- but not within a major release.
-
- * Classes not annotated are implicitly "Private". Class members not
- annotated inherit the annotations of the enclosing class.
-
- * Note: APIs generated from the proto files need to be compatible for
- rolling-upgrades. See the section on wire-compatibility for more details.
- The compatibility policies for APIs and wire-communication need to go
- hand-in-hand to address this.
-
-** Semantic compatibility
-
- Apache Hadoop strives to ensure that the behavior of APIs remains
- consistent over versions, though changes for correctness may result in
- changes in behavior. Tests and javadocs specify the API's behavior.
- The community is in the process of specifying some APIs more rigorously,
- and enhancing test suites to verify compliance with the specification,
- effectively creating a formal specification for the subset of behaviors
- that can be easily tested.
-
-*** Policy
-
- The behavior of API may be changed to fix incorrect behavior,
- such a change to be accompanied by updating existing buggy tests or adding
- tests in cases there were none prior to the change.
-
-** Wire compatibility
-
- Wire compatibility concerns data being transmitted over the wire
- between Hadoop processes. Hadoop uses Protocol Buffers for most RPC
- communication. Preserving compatibility requires prohibiting
- modification as described below.
- Non-RPC communication should be considered as well,
- for example using HTTP to transfer an HDFS image as part of
- snapshotting or transferring MapTask output. The potential
- communications can be categorized as follows:
-
- * Client-Server: communication between Hadoop clients and servers (e.g.,
- the HDFS client to NameNode protocol, or the YARN client to
- ResourceManager protocol).
-
- * Client-Server (Admin): It is worth distinguishing a subset of the
- Client-Server protocols used solely by administrative commands (e.g.,
- the HAAdmin protocol) as these protocols only impact administrators
- who can tolerate changes that end users (which use general
- Client-Server protocols) can not.
-
- * Server-Server: communication between servers (e.g., the protocol between
- the DataNode and NameNode, or NodeManager and ResourceManager)
-
-*** Use Cases
-
- * Client-Server compatibility is required to allow users to
- continue using the old clients even after upgrading the server
- (cluster) to a later version (or vice versa). For example, a
- Hadoop 2.1.0 client talking to a Hadoop 2.3.0 cluster.
-
- * Client-Server compatibility is also required to allow users to upgrade the
- client before upgrading the server (cluster). For example, a Hadoop 2.4.0
- client talking to a Hadoop 2.3.0 cluster. This allows deployment of
- client-side bug fixes ahead of full cluster upgrades. Note that new cluster
- features invoked by new client APIs or shell commands will not be usable.
- YARN applications that attempt to use new APIs (including new fields in data
- structures) that have not yet deployed to the cluster can expect link
- exceptions.
-
- * Client-Server compatibility is also required to allow upgrading
- individual components without upgrading others. For example,
- upgrade HDFS from version 2.1.0 to 2.2.0 without upgrading MapReduce.
-
- * Server-Server compatibility is required to allow mixed versions
- within an active cluster so the cluster may be upgraded without
- downtime in a rolling fashion.
-
-*** Policy
-
- * Both Client-Server and Server-Server compatibility is preserved within a
- major release. (Different policies for different categories are yet to be
- considered.)
-
- * Compatibility can be broken only at a major release, though breaking compatibility
- even at major releases has grave consequences and should be discussed in the Hadoop community.
-
- * Hadoop protocols are defined in .proto (ProtocolBuffers) files.
- Client-Server protocols and Server-protocol .proto files are marked as stable.
- When a .proto file is marked as stable it means that changes should be made
- in a compatible fashion as described below:
-
- * The following changes are compatible and are allowed at any time:
-
- * Add an optional field, with the expectation that the code deals with the field missing due to communication with an older version of the code.
-
- * Add a new rpc/method to the service
-
- * Add a new optional request to a Message
-
- * Rename a field
-
- * Rename a .proto file
-
- * Change .proto annotations that effect code generation (e.g. name of java package)
-
- * The following changes are incompatible but can be considered only at a major release
-
- * Change the rpc/method name
-
- * Change the rpc/method parameter type or return type
-
- * Remove an rpc/method
-
- * Change the service name
-
- * Change the name of a Message
-
- * Modify a field type in an incompatible way (as defined recursively)
-
- * Change an optional field to required
-
- * Add or delete a required field
-
- * Delete an optional field as long as the optional field has reasonable defaults to allow deletions
-
- * The following changes are incompatible and hence never allowed
-
- * Change a field id
-
- * Reuse an old field that was previously deleted.
-
- * Field numbers are cheap and changing and reusing is not a good idea.
-
-
-** Java Binary compatibility for end-user applications i.e. Apache Hadoop ABI
-
- As Apache Hadoop revisions are upgraded end-users reasonably expect that
- their applications should continue to work without any modifications.
- This is fulfilled as a result of support API compatibility, Semantic
- compatibility and Wire compatibility.
-
- However, Apache Hadoop is a very complex, distributed system and services a
- very wide variety of use-cases. In particular, Apache Hadoop MapReduce is a
- very, very wide API; in the sense that end-users may make wide-ranging
- assumptions such as layout of the local disk when their map/reduce tasks are
- executing, environment variables for their tasks etc. In such cases, it
- becomes very hard to fully specify, and support, absolute compatibility.
-
-*** Use cases
-
- * Existing MapReduce applications, including jars of existing packaged
- end-user applications and projects such as Apache Pig, Apache Hive,
- Cascading etc. should work unmodified when pointed to an upgraded Apache
- Hadoop cluster within a major release.
-
- * Existing YARN applications, including jars of existing packaged
- end-user applications and projects such as Apache Tez etc. should work
- unmodified when pointed to an upgraded Apache Hadoop cluster within a
- major release.
-
- * Existing applications which transfer data in/out of HDFS, including jars
- of existing packaged end-user applications and frameworks such as Apache
- Flume, should work unmodified when pointed to an upgraded Apache Hadoop
- cluster within a major release.
-
-*** Policy
-
- * Existing MapReduce, YARN & HDFS applications and frameworks should work
- unmodified within a major release i.e. Apache Hadoop ABI is supported.
-
- * A very minor fraction of applications maybe affected by changes to disk
- layouts etc., the developer community will strive to minimize these
- changes and will not make them within a minor version. In more egregious
- cases, we will consider strongly reverting these breaking changes and
- invalidating offending releases if necessary.
-
- * In particular for MapReduce applications, the developer community will
- try our best to support provide binary compatibility across major
- releases e.g. applications using org.apache.hadoop.mapred.
-
- * APIs are supported compatibly across hadoop-1.x and hadoop-2.x. See
- {{{../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/MapReduce_Compatibility_Hadoop1_Hadoop2.html}
- Compatibility for MapReduce applications between hadoop-1.x and hadoop-2.x}}
- for more details.
-
-** REST APIs
-
- REST API compatibility corresponds to both the request (URLs) and responses
- to each request (content, which may contain other URLs). Hadoop REST APIs
- are specifically meant for stable use by clients across releases,
- even major releases. The following are the exposed REST APIs:
-
- * {{{../hadoop-hdfs/WebHDFS.html}WebHDFS}} - Stable
-
- * {{{../../hadoop-yarn/hadoop-yarn-site/ResourceManagerRest.html}ResourceManager}}
-
- * {{{../../hadoop-yarn/hadoop-yarn-site/NodeManagerRest.html}NodeManager}}
-
- * {{{../../hadoop-yarn/hadoop-yarn-site/MapredAppMasterRest.html}MR Application Master}}
-
- * {{{../../hadoop-yarn/hadoop-yarn-site/HistoryServerRest.html}History Server}}
-
-*** Policy
-
- The APIs annotated stable in the text above preserve compatibility
- across at least one major release, and maybe deprecated by a newer
- version of the REST API in a major release.
-
-** Metrics/JMX
-
- While the Metrics API compatibility is governed by Java API compatibility,
- the actual metrics exposed by Hadoop need to be compatible for users to
- be able to automate using them (scripts etc.). Adding additional metrics
- is compatible. Modifying (eg changing the unit or measurement) or removing
- existing metrics breaks compatibility. Similarly, changes to JMX MBean
- object names also break compatibility.
-
-*** Policy
-
- Metrics should preserve compatibility within the major release.
-
-** File formats & Metadata
-
- User and system level data (including metadata) is stored in files of
- different formats. Changes to the metadata or the file formats used to
- store data/metadata can lead to incompatibilities between versions.
-
-*** User-level file formats
-
- Changes to formats that end-users use to store their data can prevent
- them for accessing the data in later releases, and hence it is highly
- important to keep those file-formats compatible. One can always add a
- "new" format improving upon an existing format. Examples of these formats
- include har, war, SequenceFileFormat etc.
-
-**** Policy
-
- * Non-forward-compatible user-file format changes are
- restricted to major releases. When user-file formats change, new
- releases are expected to read existing formats, but may write data
- in formats incompatible with prior releases. Also, the community
- shall prefer to create a new format that programs must opt in to
- instead of making incompatible changes to existing formats.
-
-*** System-internal file formats
-
- Hadoop internal data is also stored in files and again changing these
- formats can lead to incompatibilities. While such changes are not as
- devastating as the user-level file formats, a policy on when the
- compatibility can be broken is important.
-
-**** MapReduce
-
- MapReduce uses formats like I-File to store MapReduce-specific data.
-
-
-***** Policy
-
- MapReduce-internal formats like IFile maintain compatibility within a
- major release. Changes to these formats can cause in-flight jobs to fail
- and hence we should ensure newer clients can fetch shuffle-data from old
- servers in a compatible manner.
-
-**** HDFS Metadata
-
- HDFS persists metadata (the image and edit logs) in a particular format.
- Incompatible changes to either the format or the metadata prevent
- subsequent releases from reading older metadata. Such incompatible
- changes might require an HDFS "upgrade" to convert the metadata to make
- it accessible. Some changes can require more than one such "upgrades".
-
- Depending on the degree of incompatibility in the changes, the following
- potential scenarios can arise:
-
- * Automatic: The image upgrades automatically, no need for an explicit
- "upgrade".
-
- * Direct: The image is upgradable, but might require one explicit release
- "upgrade".
-
- * Indirect: The image is upgradable, but might require upgrading to
- intermediate release(s) first.
-
- * Not upgradeable: The image is not upgradeable.
-
-***** Policy
-
- * A release upgrade must allow a cluster to roll-back to the older
- version and its older disk format. The rollback needs to restore the
- original data, but not required to restore the updated data.
-
- * HDFS metadata changes must be upgradeable via any of the upgrade
- paths - automatic, direct or indirect.
-
- * More detailed policies based on the kind of upgrade are yet to be
- considered.
-
-** Command Line Interface (CLI)
-
- The Hadoop command line programs may be use either directly via the
- system shell or via shell scripts. Changing the path of a command,
- removing or renaming command line options, the order of arguments,
- or the command return code and output break compatibility and
- may adversely affect users.
-
-*** Policy
-
- CLI commands are to be deprecated (warning when used) for one
- major release before they are removed or incompatibly modified in
- a subsequent major release.
-
-** Web UI
-
- Web UI, particularly the content and layout of web pages, changes
- could potentially interfere with attempts to screen scrape the web
- pages for information.
-
-*** Policy
-
- Web pages are not meant to be scraped and hence incompatible
- changes to them are allowed at any time. Users are expected to use
- REST APIs to get any information.
-
-** Hadoop Configuration Files
-
- Users use (1) Hadoop-defined properties to configure and provide hints to
- Hadoop and (2) custom properties to pass information to jobs. Hence,
- compatibility of config properties is two-fold:
-
- * Modifying key-names, units of values, and default values of Hadoop-defined
- properties.
-
- * Custom configuration property keys should not conflict with the
- namespace of Hadoop-defined properties. Typically, users should
- avoid using prefixes used by Hadoop: hadoop, io, ipc, fs, net,
- file, ftp, s3, kfs, ha, file, dfs, mapred, mapreduce, yarn.
-
-*** Policy
-
- * Hadoop-defined properties are to be deprecated at least for one
- major release before being removed. Modifying units for existing
- properties is not allowed.
-
- * The default values of Hadoop-defined properties can
- be changed across minor/major releases, but will remain the same
- across point releases within a minor release.
-
- * Currently, there is NO explicit policy regarding when new
- prefixes can be added/removed, and the list of prefixes to be
- avoided for custom configuration properties. However, as noted above,
- users should avoid using prefixes used by Hadoop: hadoop, io, ipc, fs,
- net, file, ftp, s3, kfs, ha, file, dfs, mapred, mapreduce, yarn.
-
-** Directory Structure
-
- Source code, artifacts (source and tests), user logs, configuration files,
- output and job history are all stored on disk either local file system or
- HDFS. Changing the directory structure of these user-accessible
- files break compatibility, even in cases where the original path is
- preserved via symbolic links (if, for example, the path is accessed
- by a servlet that is configured to not follow symbolic links).
-
-*** Policy
-
- * The layout of source code and build artifacts can change
- anytime, particularly so across major versions. Within a major
- version, the developers will attempt (no guarantees) to preserve
- the directory structure; however, individual files can be
- added/moved/deleted. The best way to ensure patches stay in sync
- with the code is to get them committed to the Apache source tree.
-
- * The directory structure of configuration files, user logs, and
- job history will be preserved across minor and point releases
- within a major release.
-
-** Java Classpath
-
- User applications built against Hadoop might add all Hadoop jars
- (including Hadoop's library dependencies) to the application's
- classpath. Adding new dependencies or updating the version of
- existing dependencies may interfere with those in applications'
- classpaths.
-
-*** Policy
-
- Currently, there is NO policy on when Hadoop's dependencies can
- change.
-
-** Environment variables
-
- Users and related projects often utilize the exported environment
- variables (eg HADOOP_CONF_DIR), therefore removing or renaming
- environment variables is an incompatible change.
-
-*** Policy
-
- Currently, there is NO policy on when the environment variables
- can change. Developers try to limit changes to major releases.
-
-** Build artifacts
-
- Hadoop uses maven for project management and changing the artifacts
- can affect existing user workflows.
-
-*** Policy
-
- * Test artifacts: The test jars generated are strictly for internal
- use and are not expected to be used outside of Hadoop, similar to
- APIs annotated @Private, @Unstable.
-
- * Built artifacts: The hadoop-client artifact (maven
- groupId:artifactId) stays compatible within a major release,
- while the other artifacts can change in incompatible ways.
-
-** Hardware/Software Requirements
-
- To keep up with the latest advances in hardware, operating systems,
- JVMs, and other software, new Hadoop releases or some of their
- features might require higher versions of the same. For a specific
- environment, upgrading Hadoop might require upgrading other
- dependent software components.
-
-*** Policies
-
- * Hardware
-
- * Architecture: The community has no plans to restrict Hadoop to
- specific architectures, but can have family-specific
- optimizations.
-
- * Minimum resources: While there are no guarantees on the
- minimum resources required by Hadoop daemons, the community
- attempts to not increase requirements within a minor release.
-
- * Operating Systems: The community will attempt to maintain the
- same OS requirements (OS kernel versions) within a minor
- release. Currently GNU/Linux and Microsoft Windows are the OSes officially
- supported by the community while Apache Hadoop is known to work reasonably
- well on other OSes such as Apple MacOSX, Solaris etc.
-
- * The JVM requirements will not change across point releases
- within the same minor release except if the JVM version under
- question becomes unsupported. Minor/major releases might require
- later versions of JVM for some/all of the supported operating
- systems.
-
- * Other software: The community tries to maintain the minimum
- versions of additional software required by Hadoop. For example,
- ssh, kerberos etc.
-
-* References
-
- Here are some relevant JIRAs and pages related to the topic:
-
- * The evolution of this document -
- {{{https://issues.apache.org/jira/browse/HADOOP-9517}HADOOP-9517}}
-
- * Binary compatibility for MapReduce end-user applications between hadoop-1.x and hadoop-2.x -
- {{{../../hadoop-mapreduce-client/hadoop-mapreduce-client-core/MapReduce_Compatibility_Hadoop1_Hadoop2.html}
- MapReduce Compatibility between hadoop-1.x and hadoop-2.x}}
-
- * Annotations for interfaces as per interface classification
- schedule -
- {{{https://issues.apache.org/jira/browse/HADOOP-7391}HADOOP-7391}}
- {{{./InterfaceClassification.html}Hadoop Interface Classification}}
-
- * Compatibility for Hadoop 1.x releases -
- {{{https://issues.apache.org/jira/browse/HADOOP-5071}HADOOP-5071}}
-
- * The {{{http://wiki.apache.org/hadoop/Roadmap}Hadoop Roadmap}} page
- that captures other release policies
-