You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@openoffice.apache.org by ms...@apache.org on 2025/02/07 12:58:06 UTC
(openoffice) branch AOO42X updated: Cleanup
This is an automated email from the ASF dual-hosted git repository.
mseidel pushed a commit to branch AOO42X
in repository https://gitbox.apache.org/repos/asf/openoffice.git
The following commit(s) were added to refs/heads/AOO42X by this push:
new ee3d006ca2 Cleanup
ee3d006ca2 is described below
commit ee3d006ca2c68e3cea2f865d08f9a43bb72dd4c6
Author: mseidel <ms...@apache.org>
AuthorDate: Fri Feb 7 13:56:13 2025 +0100
Cleanup
(cherry picked from commit 8ac570c6d50c1ad9896c5c4a0f44668dbe040aef)
---
.../bin/modules/installer/windows/msiglobal.pm | 863 ++++++++++-----------
main/solenv/bin/modules/installer/windows/sign.pm | 330 ++++----
2 files changed, 594 insertions(+), 599 deletions(-)
diff --git a/main/solenv/bin/modules/installer/windows/msiglobal.pm b/main/solenv/bin/modules/installer/windows/msiglobal.pm
index 654c672455..bce2ae7717 100644
--- a/main/solenv/bin/modules/installer/windows/msiglobal.pm
+++ b/main/solenv/bin/modules/installer/windows/msiglobal.pm
@@ -1,5 +1,5 @@
#**************************************************************
-#
+#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
@@ -7,20 +7,18 @@
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
-#
+#
# http://www.apache.org/licenses/LICENSE-2.0
-#
+#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
-#
+#
#**************************************************************
-
-
package installer::windows::msiglobal;
use Cwd;
@@ -50,9 +48,9 @@ use strict;
sub write_ddf_file_header
{
my ($ddffileref, $cabinetfile, $installdir) = @_;
-
+
my $oneline;
-
+
$oneline = ".Set CabinetName1=" . $cabinetfile . "\n";
push(@{$ddffileref} ,$oneline);
$oneline = ".Set ReservePerCabinetSize=128\n"; # This reserves space for a digital signature.
@@ -87,30 +85,30 @@ sub check_ddf_file
for ( my $i = 0; $i <= $#{$ddffile}; $i++ )
{
my $oneline = ${$ddffile}[$i];
-
+
$linelength = length($oneline);
$linenumber = $i + 1;
-
+
if ( $linelength > 256 )
{
installer::exiter::exit_program("ERROR \"$ddffilename\" line $linenumber: Lines in ddf files must not contain more than 256 characters!", "check_ddf_file");
}
-
+
if ( $linelength > $maxlength )
{
$maxlength = $linelength;
$maxline = $linenumber;
}
}
-
- my $infoline = "Check of ddf file \"$ddffilename\": Maximum length \"$maxlength\" in line \"$maxline\" (allowed line length: 256 characters)\n";
+
+ my $infoline = "Check of ddf file \"$ddffilename\": Maximum length \"$maxlength\" in line \"$maxline\" (allowed line length: 256 characters)\n";
$installer::logger::Lang->print($infoline);
}
##########################################################################
# Lines in ddf files must not be longer than 256 characters.
# Therefore it can be useful to use relative paths. Then it is
-# necessary to change into temp directory before calling
+# necessary to change into temp directory before calling
# makecab.exe.
##########################################################################
@@ -124,16 +122,16 @@ sub make_relative_ddf_path
{
$windowstemppath = $installer::globals::cyg_temppath;
}
-
+
$sourcepath =~ s/\Q$windowstemppath\E//;
$sourcepath =~ s/^\\//;
-
+
return $sourcepath;
}
##########################################################################
-# Generation the list, in which the source of the files is connected
+# Generating the list, in which the source of the files is connected
# with the cabinet destination file. Because more than one file needs
# to be included into a cab file, this has to be done via ddf files.
##########################################################################
@@ -141,79 +139,79 @@ sub make_relative_ddf_path
sub generate_cab_file_list ($$$$)
{
my ($filesref, $installdir, $ddfdir, $allvariables) = @_;
-
+
installer::logger::include_header_into_logfile("Generating ddf files");
if ( $^O =~ /cygwin/i )
- {
- installer::worker::generate_cygwin_pathes($filesref);
- }
-
- # Make sure that all files point to the same cabinet file.
- # Multiple cabinet files are not supported anymore.
- my $cabinetfile = $filesref->[0]->{'cabinet'};
- foreach my $onefile (@$filesref)
- {
- if ($onefile->{'cabinet'} ne $cabinetfile)
- {
- installer::exiter::exit_program(
- "ERROR: multiple cabinet files are not supported",
- "generate_cab_file_list");
- }
- }
-
- # Sort files on the sequence number.
- my @sorted_files = sort {$a->{'sequencenumber'} <=> $b->{'sequencenumber'}} @$filesref;
-
- my @ddffile = ();
- write_ddf_file_header(\@ddffile, $cabinetfile, $installdir);
- foreach my $onefile (@sorted_files)
- {
- my $styles = $onefile->{'Styles'};
- $styles = "" unless defined $styles;
- if ($styles =~ /\bDONT_PACK\b/)
- {
- $installer::logger::Lang->printf(" excluding '%s' from ddf\n", $onefile->{'uniquename'});
- }
-
- my $uniquename = $onefile->{'uniquename'};
- my $sourcepath = $onefile->{'sourcepath'};
- if ( $^O =~ /cygwin/i )
- {
- $sourcepath = $onefile->{'cyg_sourcepath'};
- }
-
- # to avoid lines with more than 256 characters, it can be useful to use relative paths
- if ($allvariables->{'RELATIVE_PATHES_IN_DDF'})
- {
- $sourcepath = make_relative_ddf_path($sourcepath);
- }
-
- my $ddfline = "\"" . $sourcepath . "\"" . " " . $uniquename . "\n";
- push(@ddffile, $ddfline);
-
- $installer::logger::Lang->printf(" adding '%s' with sequence %d to ddf\n",
- $onefile->{'uniquename'},
- $onefile->{'sequencenumber'});
- }
- # creating the DDF file
-
- my $ddffilename = $cabinetfile;
- $ddffilename =~ s/.cab/.ddf/;
- $ddfdir =~ s/\Q$installer::globals::separator\E\s*$//;
- $ddffilename = $ddfdir . $installer::globals::separator . $ddffilename;
-
- installer::files::save_file($ddffilename ,\@ddffile);
- $installer::logger::Lang->print("Created ddf file: %s\n", $ddffilename);
-
- # lines in ddf files must not be longer than 256 characters
- check_ddf_file(\@ddffile, $ddffilename);
-
- # collecting all ddf files
- push(@installer::globals::allddffiles, $ddffilename);
-
- # Writing the makecab system call
- # Return a list with all system calls for packaging process.
+ {
+ installer::worker::generate_cygwin_pathes($filesref);
+ }
+
+ # Make sure that all files point to the same cabinet file.
+ # Multiple cabinet files are not supported anymore.
+ my $cabinetfile = $filesref->[0]->{'cabinet'};
+ foreach my $onefile (@$filesref)
+ {
+ if ($onefile->{'cabinet'} ne $cabinetfile)
+ {
+ installer::exiter::exit_program(
+ "ERROR: multiple cabinet files are not supported",
+ "generate_cab_file_list");
+ }
+ }
+
+ # Sort files on the sequence number.
+ my @sorted_files = sort {$a->{'sequencenumber'} <=> $b->{'sequencenumber'}} @$filesref;
+
+ my @ddffile = ();
+ write_ddf_file_header(\@ddffile, $cabinetfile, $installdir);
+ foreach my $onefile (@sorted_files)
+ {
+ my $styles = $onefile->{'Styles'};
+ $styles = "" unless defined $styles;
+ if ($styles =~ /\bDONT_PACK\b/)
+ {
+ $installer::logger::Lang->printf(" excluding '%s' from ddf\n", $onefile->{'uniquename'});
+ }
+
+ my $uniquename = $onefile->{'uniquename'};
+ my $sourcepath = $onefile->{'sourcepath'};
+ if ( $^O =~ /cygwin/i )
+ {
+ $sourcepath = $onefile->{'cyg_sourcepath'};
+ }
+
+ # to avoid lines with more than 256 characters, it can be useful to use relative paths
+ if ($allvariables->{'RELATIVE_PATHES_IN_DDF'})
+ {
+ $sourcepath = make_relative_ddf_path($sourcepath);
+ }
+
+ my $ddfline = "\"" . $sourcepath . "\"" . " " . $uniquename . "\n";
+ push(@ddffile, $ddfline);
+
+ $installer::logger::Lang->printf(" adding '%s' with sequence %d to ddf\n",
+ $onefile->{'uniquename'},
+ $onefile->{'sequencenumber'});
+ }
+ # creating the DDF file
+
+ my $ddffilename = $cabinetfile;
+ $ddffilename =~ s/.cab/.ddf/;
+ $ddfdir =~ s/\Q$installer::globals::separator\E\s*$//;
+ $ddffilename = $ddfdir . $installer::globals::separator . $ddffilename;
+
+ installer::files::save_file($ddffilename ,\@ddffile);
+ $installer::logger::Lang->print("Created ddf file: %s\n", $ddffilename);
+
+ # lines in ddf files must not be longer than 256 characters
+ check_ddf_file(\@ddffile, $ddffilename);
+
+ # collecting all ddf files
+ push(@installer::globals::allddffiles, $ddffilename);
+
+ # Writing the makecab system call
+ # Return a list with all system calls for packaging process.
my @cabfilelist = ("makecab.exe /V3 /F " . $ddffilename . " 2\>\&1 |" . "\n");
return \@cabfilelist;
}
@@ -227,7 +225,7 @@ sub generate_cab_file_list ($$$$)
sub get_msidatabasename
{
my ($allvariableshashref, $language) = @_;
-
+
my $databasename = $allvariableshashref->{'PRODUCTNAME'} . $allvariableshashref->{'PRODUCTVERSION'};
$databasename = lc($databasename);
$databasename =~ s/\.//g;
@@ -239,7 +237,7 @@ sub get_msidatabasename
{
$databasename = $allvariableshashref->{'DATABASENAME'};
}
-
+
if ( $language )
{
if (!($language eq ""))
@@ -247,9 +245,9 @@ sub get_msidatabasename
$databasename .= "_$language";
}
}
-
+
$databasename .= ".msi";
-
+
return $databasename;
}
@@ -260,7 +258,7 @@ sub get_msidatabasename
sub create_msi_database
{
- my ($idtdirbase ,$msifilename) = @_;
+ my ($idtdirbase ,$msifilename) = @_;
# -f : path containing the idt files
# -d : msi database, including path
@@ -288,7 +286,7 @@ sub create_msi_database
my $infoline = "Systemcall: $systemcall\n";
$installer::logger::Lang->print($infoline);
-
+
if ($returnvalue)
{
$infoline = "ERROR: Could not execute $msidb!\n";
@@ -308,11 +306,11 @@ sub create_msi_database
sub get_value_from_sis_lng
{
my ($language, $languagefile, $searchstring) = @_;
-
+
my $language_block = installer::windows::idtglobal::get_language_block_from_language_file($searchstring, $languagefile);
my $newstring = installer::windows::idtglobal::get_language_string_from_language_block($language_block, $language, $searchstring);
$newstring = "\"" . $newstring . "\"";
-
+
return $newstring;
}
@@ -323,7 +321,7 @@ sub get_value_from_sis_lng
sub get_msiversion_for_sis
{
my $msiversion = "200";
- return $msiversion;
+ return $msiversion;
}
#################################################################
@@ -333,7 +331,7 @@ sub get_msiversion_for_sis
sub get_wordcount_for_sis
{
my $wordcount = "0";
- return $wordcount;
+ return $wordcount;
}
#################################################################
@@ -351,7 +349,7 @@ sub get_codepage_for_sis
# my $codepage = "1252"; # determine dynamically in a function
# my $codepage = "65001"; # UTF-8
- return $codepage;
+ return $codepage;
}
#################################################################
@@ -361,19 +359,19 @@ sub get_codepage_for_sis
sub get_template_for_sis
{
my ( $language, $allvariables ) = @_;
-
- my $windowslanguage = installer::windows::language::get_windows_language($language);
-
+
+ my $windowslanguage = installer::windows::language::get_windows_language($language);
+
my $architecture = "Intel";
# Adding 256, if this is a 64 bit installation set.
if (( $allvariables->{'64BITPRODUCT'} ) && ( $allvariables->{'64BITPRODUCT'} == 1 )) { $architecture = "x64"; }
my $value = "\"" . $architecture . ";" . $windowslanguage; # adding the Windows language
-
+
$value = $value . "\""; # adding ending '"'
-
- return $value ;
+
+ return $value ;
}
#################################################################
@@ -389,7 +387,7 @@ sub get_packagecode_for_sis
my $infoline = "PackageCode: $guid\n";
$installer::logger::Lang->print($infoline);
- return $guid;
+ return $guid;
}
#################################################################
@@ -425,7 +423,7 @@ sub get_author_for_sis
sub get_subject_for_sis
{
my ( $allvariableshashref ) = @_;
-
+
my $subject = $allvariableshashref->{'PRODUCTNAME'} . " " . $allvariableshashref->{'PRODUCTVERSION'};
$subject = "\"" . $subject . "\"";
@@ -491,16 +489,16 @@ sub write_summary_into_msi_database
{
my ($msifilename, $language, $languagefile, $allvariableshashref) = @_;
- # -g : requrired msi version
+ # -g : required msi version
# -c : codepage
# -p : template
installer::logger::include_header_into_logfile("Writing summary information stream");
my $msiinfo = "msiinfo.exe"; # Has to be in the path
-
- my $sislanguage = "en-US"; # title, comment, keyword and appname alway in english
-
+
+ my $sislanguage = "en-US"; # title, comment, keyword and appname always in English
+
my $msiversion = get_msiversion_for_sis();
my $codepage = get_codepage_for_sis($language);
my $template = get_template_for_sis($language, $allvariableshashref);
@@ -513,10 +511,10 @@ sub write_summary_into_msi_database
my $appname = get_appname_for_sis($sislanguage,$languagefile, "OOO_SIS_APPNAME");
my $security = get_security_for_sis();
my $wordcount = get_wordcount_for_sis();
-
+
$msifilename = installer::converter::make_path_conform($msifilename);
-
- my $systemcall = $msiinfo . " " . $msifilename . " -g " . $msiversion . " -c " . $codepage
+
+ my $systemcall = $msiinfo . " " . $msifilename . " -g " . $msiversion . " -c " . $codepage
. " -p " . $template . " -v " . $guid . " -t " . $title . " -a " . $author
. " -j " . $subject . " -o " . $comment . " -k " . $keywords . " -n " . $appname
. " -u " . $security . " -w " . $wordcount;
@@ -525,7 +523,7 @@ sub write_summary_into_msi_database
my $infoline = "Systemcall: $systemcall\n";
$installer::logger::Lang->print($infoline);
-
+
if ($returnvalue)
{
$infoline = "ERROR: Could not execute $msiinfo!\n";
@@ -535,7 +533,7 @@ sub write_summary_into_msi_database
{
$infoline = "Success: Executed $msiinfo successfully!\n";
$installer::logger::Lang->print($infoline);
- }
+ }
}
#########################################################################
@@ -545,48 +543,48 @@ sub write_summary_into_msi_database
sub create_transforms
{
- my ($languagesarray, $defaultlanguage, $installdir, $allvariableshashref) = @_;
+ my ($languagesarray, $defaultlanguage, $installdir, $allvariableshashref) = @_;
installer::logger::include_header_into_logfile("Creating Transforms");
my $msitran = "msitran.exe"; # Has to be in the path
-
+
$installdir = installer::converter::make_path_conform($installdir);
-
+
# Syntax for creating a transformation
# msitran.exe -g <baseDB> <referenceDB> <transformfile> [<errorhandling>}
-
- my $basedbname = get_msidatabasename($allvariableshashref, $defaultlanguage);
+
+ my $basedbname = get_msidatabasename($allvariableshashref, $defaultlanguage);
$basedbname = $installdir . $installer::globals::separator . $basedbname;
my $errorhandling = "f"; # Suppress "change codepage" error
# Iterating over all files
-
+
foreach ( @{$languagesarray} )
{
my $onelanguage = $_;
-
+
if ( $onelanguage eq $defaultlanguage ) { next; }
-
- my $referencedbname = get_msidatabasename($allvariableshashref, $onelanguage);
+
+ my $referencedbname = get_msidatabasename($allvariableshashref, $onelanguage);
$referencedbname = $installdir . $installer::globals::separator . $referencedbname;
-
+
my $transformfile = $installdir . $installer::globals::separator . "trans_" . $onelanguage . ".mst";
- my $systemcall = $msitran . " " . " -g " . $basedbname . " " . $referencedbname . " " . $transformfile . " " . $errorhandling;
+ my $systemcall = $msitran . " " . " -g " . $basedbname . " " . $referencedbname . " " . $transformfile . " " . $errorhandling;
my $returnvalue = system($systemcall);
my $infoline = "Systemcall: $systemcall\n";
$installer::logger::Lang->print($infoline);
-
+
# Problem: msitran.exe in version 4.0 always returns "1", even if no failure occurred.
# Therefore it has to be checked, if this is version 4.0. If yes, if the mst file
# exists and if it is larger than 0 bytes. If this is true, then no error occurred.
# File Version of msitran.exe: 4.0.6000.16384 has checksum: "b66190a70145a57773ec769e16777b29".
# Same for msitran.exe from wntmsci12: "aa25d3445b94ffde8ef0c1efb77a56b8"
-
+
if ($returnvalue)
{
$infoline = "WARNING: Returnvalue of $msitran is not 0. Checking version of $msitran!\n";
@@ -594,12 +592,12 @@ sub create_transforms
open(FILE, "<$installer::globals::msitranpath") or die "ERROR: Can't open $installer::globals::msitranpath for creating file hash";
binmode(FILE);
- my $digest = Digest::MD5->new->addfile(*FILE)->hexdigest;
+ my $digest = Digest::MD5->new->addfile(*FILE)->hexdigest;
close(FILE);
my @problemchecksums = ("b66190a70145a57773ec769e16777b29", "aa25d3445b94ffde8ef0c1efb77a56b8");
my $isproblemchecksum = 0;
-
+
foreach my $problemchecksum ( @problemchecksums )
{
$infoline = "Checksum of problematic MsiTran.exe: $problemchecksum\n";
@@ -624,7 +622,7 @@ sub create_transforms
{
$infoline = "Info: Returnvalue $returnvalue of $msitran is no problem :-) .\n";
$installer::logger::Lang->print($infoline);
- $returnvalue = 0; # reset the error
+ $returnvalue = 0; # reset the error
}
else
{
@@ -635,32 +633,32 @@ sub create_transforms
else
{
$infoline = "File $transformfile does not exist -> An error occurred.\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
}
else
{
$infoline = "This is not a problematic version of msitran.exe. Therefore the error is not caused by problematic msitran.exe.\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
- }
-
+ }
+
if ($returnvalue)
{
$infoline = "ERROR: Could not execute $msitran!\n";
$installer::logger::Lang->print($infoline);
}
- else
+ else
{
$infoline = "Success: Executed $msitran successfully!\n";
$installer::logger::Lang->print($infoline);
- }
+ }
# The reference database can be deleted
-
- my $result = unlink($referencedbname);
+
+ my $result = unlink($referencedbname);
# $result contains the number of deleted files
-
+
if ( $result == 0 )
{
$infoline = "ERROR: Could not remove file $$referencedbname !\n";
@@ -678,21 +676,21 @@ sub create_transforms
sub rename_msi_database_in_installset
{
- my ($defaultlanguage, $installdir, $allvariableshashref) = @_;
+ my ($defaultlanguage, $installdir, $allvariableshashref) = @_;
installer::logger::include_header_into_logfile("Renaming msi database");
- my $olddatabasename = get_msidatabasename($allvariableshashref, $defaultlanguage);
+ my $olddatabasename = get_msidatabasename($allvariableshashref, $defaultlanguage);
$olddatabasename = $installdir . $installer::globals::separator . $olddatabasename;
- my $newdatabasename = get_msidatabasename($allvariableshashref);
+ my $newdatabasename = get_msidatabasename($allvariableshashref);
$installer::globals::shortmsidatabasename = $newdatabasename;
$newdatabasename = $installdir . $installer::globals::separator . $newdatabasename;
installer::systemactions::rename_one_file($olddatabasename, $newdatabasename);
-
+
$installer::globals::msidatabasename = $newdatabasename;
}
@@ -706,17 +704,17 @@ sub add_language_to_msi_database
my ($defaultlanguage, $installdir, $allvariables) = @_;
my $languagestring = $defaultlanguage;
- if ( $allvariables->{'USELANGUAGECODE'} ) { $languagestring = installer::windows::language::get_windows_language($defaultlanguage); }
+ if ( $allvariables->{'USELANGUAGECODE'} ) { $languagestring = installer::windows::language::get_windows_language($defaultlanguage); }
my $newdatabasename = $installer::globals::shortmsidatabasename;
$newdatabasename =~ s/\.msi\s*$/_$languagestring\.msi/;
$installer::globals::shortmsidatabasename = $newdatabasename;
$newdatabasename = $installdir . $installer::globals::separator . $newdatabasename;
my $olddatabasename = $installer::globals::msidatabasename;
-
+
installer::systemactions::rename_one_file($olddatabasename, $newdatabasename);
-
- $installer::globals::msidatabasename = $newdatabasename;
+
+ $installer::globals::msidatabasename = $newdatabasename;
}
##########################################################################
@@ -726,10 +724,10 @@ sub add_language_to_msi_database
sub put_databasename_into_setupini
{
my ($setupinifile, $allvariableshashref) = @_;
-
+
my $databasename = get_msidatabasename($allvariableshashref);
my $line = "database=" . $databasename . "\n";
-
+
push(@{$setupinifile}, $line);
}
@@ -740,10 +738,10 @@ sub put_databasename_into_setupini
sub put_msiversion_into_setupini
{
my ($setupinifile) = @_;
-
- my $msiversion = "2.0";
+
+ my $msiversion = "2.0";
my $line = "msiversion=" . $msiversion . "\n";
-
+
push(@{$setupinifile}, $line);
}
@@ -754,10 +752,10 @@ sub put_msiversion_into_setupini
sub put_productname_into_setupini
{
my ($setupinifile, $allvariableshashref) = @_;
-
- my $productname = $allvariableshashref->{'PRODUCTNAME'};
+
+ my $productname = $allvariableshashref->{'PRODUCTNAME'};
my $line = "productname=" . $productname . "\n";
-
+
push(@{$setupinifile}, $line);
}
@@ -768,10 +766,10 @@ sub put_productname_into_setupini
sub put_productcode_into_setupini
{
my ($setupinifile) = @_;
-
- my $productcode = $installer::globals::productcode;
+
+ my $productcode = $installer::globals::productcode;
my $line = "productcode=" . $productcode . "\n";
-
+
push(@{$setupinifile}, $line);
}
@@ -782,8 +780,8 @@ sub put_productcode_into_setupini
sub put_productversion_into_setupini
{
my ($setupinifile) = @_;
-
- my $line = "productversion=" . $installer::globals::msiproductversion . "\n";
+
+ my $line = "productversion=" . $installer::globals::msiproductversion . "\n";
push(@{$setupinifile}, $line);
}
@@ -794,10 +792,10 @@ sub put_productversion_into_setupini
sub put_upgradekey_into_setupini
{
my ($setupinifile) = @_;
-
+
if ( $installer::globals::minorupgradekey ne "" )
{
- my $line = "upgradekey=" . $installer::globals::minorupgradekey . "\n";
+ my $line = "upgradekey=" . $installer::globals::minorupgradekey . "\n";
push(@{$setupinifile}, $line);
}
}
@@ -809,10 +807,10 @@ sub put_upgradekey_into_setupini
sub put_languagecount_into_setupini
{
my ($setupinifile, $languagesarray) = @_;
-
+
my $languagecount = $#{$languagesarray} + 1;
my $line = "count=" . $languagecount . "\n";
-
+
push(@{$setupinifile}, $line);
}
@@ -823,9 +821,9 @@ sub put_languagecount_into_setupini
sub put_defaultlanguage_into_setupini
{
my ($setupinifile, $defaultlanguage) = @_;
-
+
my $windowslanguage = installer::windows::language::get_windows_language($defaultlanguage);
- my $line = "default=" . $windowslanguage . "\n";
+ my $line = "default=" . $windowslanguage . "\n";
push(@{$setupinifile}, $line);
}
@@ -836,12 +834,12 @@ sub put_defaultlanguage_into_setupini
sub put_transforms_into_setupini
{
my ($setupinifile, $onelanguage, $counter) = @_;
-
+
my $windowslanguage = installer::windows::language::get_windows_language($onelanguage);
my $transformfilename = "trans_" . $onelanguage . ".mst";
-
+
my $line = "lang" . $counter . "=" . $windowslanguage . "," . $transformfilename . "\n";
-
+
push(@{$setupinifile}, $line);
}
@@ -861,20 +859,20 @@ sub include_windows_lineends
}
##########################################################################
-# Generation the file setup.ini, that is used by the loader setup.exe.
+# Generating the file setup.ini, that is used by the loader setup.exe.
##########################################################################
sub create_setup_ini
{
- my ($languagesarray, $defaultlanguage, $installdir, $allvariableshashref) = @_;
+ my ($languagesarray, $defaultlanguage, $installdir, $allvariableshashref) = @_;
installer::logger::include_header_into_logfile("Creating setup.ini");
my $setupinifilename = $installdir . $installer::globals::separator . "setup.ini";
-
+
my @setupinifile = ();
my $setupinifile = \@setupinifile;
-
+
my $line = "\[setup\]\n";
push(@setupinifile, $line);
@@ -884,7 +882,7 @@ sub create_setup_ini
put_productcode_into_setupini($setupinifile);
put_productversion_into_setupini($setupinifile);
put_upgradekey_into_setupini($setupinifile);
-
+
$line = "\[languages\]\n";
push(@setupinifile, $line);
@@ -901,7 +899,7 @@ sub create_setup_ini
put_transforms_into_setupini($setupinifile, ${$languagesarray}[$i], $counter);
$counter++;
- }
+ }
}
if ( $installer::globals::iswin && $installer::globals::plat =~ /cygwin/i) # Windows line ends only for Cygwin
@@ -909,44 +907,44 @@ sub create_setup_ini
include_windows_lineends($setupinifile);
}
- installer::files::save_file($setupinifilename, $setupinifile);
+ installer::files::save_file($setupinifilename, $setupinifile);
$installer::logger::Lang->printf("Generated file %s\n", $setupinifilename);
}
#################################################################
-# Copying the files defined as ScpActions into the
+# Copying the files defined as ScpActions into the
# installation set.
#################################################################
sub copy_scpactions_into_installset
{
- my ($defaultlanguage, $installdir, $allscpactions) = @_;
+ my ($defaultlanguage, $installdir, $allscpactions) = @_;
installer::logger::include_header_into_logfile("Copying ScpAction files into installation set");
for ( my $i = 0; $i <= $#{$allscpactions}; $i++ )
{
my $onescpaction = ${$allscpactions}[$i];
-
+
if ( $onescpaction->{'Name'} eq "loader.exe" ) { next; } # do not copy this ScpAction loader
-
+
# only copying language independent files or files with the correct language (the defaultlanguage)
-
+
my $filelanguage = $onescpaction->{'specificlanguage'};
-
+
if ( ($filelanguage eq $defaultlanguage) || ($filelanguage eq "") )
- {
+ {
my $sourcefile = $onescpaction->{'sourcepath'};
my $destfile = $installdir . $installer::globals::separator . $onescpaction->{'DestinationName'};
installer::systemactions::copy_one_file($sourcefile, $destfile);
- }
+ }
}
}
#################################################################
-# Copying the files for the Windows installer into the
+# Copying the files for the Windows installer into the
# installation set (setup.exe).
#################################################################
@@ -954,18 +952,18 @@ sub copy_windows_installer_files_into_installset
{
my ($installdir, $includepatharrayref, $allvariables) = @_;
- installer::logger::include_header_into_logfile("Copying Windows installer files into installation set");
-
+ installer::logger::include_header_into_logfile("Copying Windows installer files into installation set");
+
my @copyfile = ();
push(@copyfile, "loader2.exe");
-
+
if ( $allvariables->{'NOLOADERREQUIRED'} ) { @copyfile = (); }
-
+
for ( my $i = 0; $i <= $#copyfile; $i++ )
{
my $filename = $copyfile[$i];
my $sourcefileref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$filename, $includepatharrayref, 1);
-
+
if ( ! -f $$sourcefileref ) { installer::exiter::exit_program("ERROR: msi file not found: $$sourcefileref !", "copy_windows_installer_files_into_installset"); }
my $destfile;
@@ -974,12 +972,12 @@ sub copy_windows_installer_files_into_installset
$destfile = $installdir . $installer::globals::separator . $destfile;
- installer::systemactions::copy_one_file($$sourcefileref, $destfile);
+ installer::systemactions::copy_one_file($$sourcefileref, $destfile);
}
}
#################################################################
-# Copying the child projects into the
+# Copying the child projects into the
# installation set
#################################################################
@@ -1013,14 +1011,14 @@ sub copy_child_projects_into_installset
=head2 create_guid ()
- Create a single UUID aka GUID via calling the external executable 'uuidgen'.
- There are Perl modules for that, but do they exist on the build bots?
-
+ Create a single UUID aka GUID via calling the external executable 'uuidgen'.
+ There are Perl modules for that, but do they exist on the build bots?
+
=cut
sub create_guid ()
{
my $uuid = qx("uuidgen");
- $uuid =~ s/\s*$//;
+ $uuid =~ s/\s*$//;
return uc($uuid);
}
@@ -1031,21 +1029,21 @@ sub create_guid ()
sub calculate_guid
{
my ( $string ) = @_;
-
+
my $guid = "";
-
- my $md5 = Digest::MD5->new;
- $md5->add($string);
- my $digest = $md5->hexdigest;
- $digest = uc($digest);
+
+ my $md5 = Digest::MD5->new;
+ $md5->add($string);
+ my $digest = $md5->hexdigest;
+ $digest = uc($digest);
# my $id = pack("A32", $digest);
my ($first, $second, $third, $fourth, $fifth) = unpack ('A8 A4 A4 A4 A12', $digest);
$guid = "$first-$second-$third-$fourth-$fifth";
- $installer::logger::Lang->printf("guid for '%s' is %s\n",
- $string, $guid);
-
+ $installer::logger::Lang->printf("guid for '%s' is %s\n",
+ $string, $guid);
+
return $guid;
}
@@ -1056,19 +1054,19 @@ sub calculate_guid
sub calculate_id
{
my ( $string, $length ) = @_;
-
+
my $id = "";
-
- my $md5 = Digest::MD5->new;
- $md5->add($string);
- my $digest = lc($md5->hexdigest);
+
+ my $md5 = Digest::MD5->new;
+ $md5->add($string);
+ my $digest = lc($md5->hexdigest);
$id = substr($digest, 0, $length);
-
+
return $id;
}
#################################################################
-# Filling the component hash with the values of the
+# Filling the component hash with the values of the
# component file.
#################################################################
@@ -1081,16 +1079,16 @@ sub fill_component_hash
for ( my $i = 0; $i <= $#{$componentfile}; $i++ )
{
my $line = ${$componentfile}[$i];
-
+
if ( $line =~ /^\s*(.*?)\t(.*?)\s*$/ )
{
my $key = $1;
my $value = $2;
-
+
$components{$key} = $value;
}
}
-
+
return \%components;
}
@@ -1103,9 +1101,9 @@ sub create_new_component_file
my ($componenthash) = @_;
my @componentfile = ();
-
+
my $key;
-
+
foreach $key (keys %{$componenthash})
{
my $value = $componenthash->{$key};
@@ -1124,19 +1122,19 @@ sub create_new_component_file
sub __set_uuid_into_component_table
{
my ($idtdirbase, $allvariables) = @_;
-
- my $componenttablename = $idtdirbase . $installer::globals::separator . "Componen.idt";
-
+
+ my $componenttablename = $idtdirbase . $installer::globals::separator . "Componen.idt";
+
my $componenttable = installer::files::read_file($componenttablename);
-
+
# For update and patch reasons (small update) the GUID of an existing component must not change!
# The collection of component GUIDs is saved in the directory $installer::globals::idttemplatepath in the file "components.txt"
-
+
my $infoline = "";
my $counter = 0;
# my $componentfile = installer::files::read_file($installer::globals::componentfilename);
# my $componenthash = fill_component_hash($componentfile);
-
+
for ( my $i = 3; $i <= $#{$componenttable}; $i++ ) # ignoring the first three lines
{
my $oneline = ${$componenttable}[$i];
@@ -1154,26 +1152,26 @@ sub __set_uuid_into_component_table
if ( exists($installer::globals::calculated_component_guids{$componentname}))
{
- $uuid = $installer::globals::calculated_component_guids{$componentname};
+ $uuid = $installer::globals::calculated_component_guids{$componentname};
}
else
{
# Calculating new GUID with the help of the component name.
my $useooobaseversion = 1;
if ( exists($installer::globals::base_independent_components{$componentname}))
- {
- $useooobaseversion = 0;
- }
+ {
+ $useooobaseversion = 0;
+ }
my $sourcestring = $componentname;
if ( $useooobaseversion )
{
if ( ! exists($allvariables->{'OOOBASEVERSION'}) )
- {
- installer::exiter::exit_program(
- "ERROR: Could not find variable \"OOOBASEVERSION\" (required value for GUID creation)!",
- "set_uuid_into_component_table");
- }
+ {
+ installer::exiter::exit_program(
+ "ERROR: Could not find variable \"OOOBASEVERSION\" (required value for GUID creation)!",
+ "set_uuid_into_component_table");
+ }
$sourcestring = $sourcestring . "_" . $allvariables->{'OOOBASEVERSION'};
}
$uuid = calculate_guid($sourcestring);
@@ -1181,27 +1179,27 @@ sub __set_uuid_into_component_table
# checking, if there is a conflict with an already created guid
if ( exists($installer::globals::allcalculated_guids{$uuid}) )
- {
- installer::exiter::exit_program(
- "ERROR: \"$uuid\" was already created before!",
- "set_uuid_into_component_table");
- }
+ {
+ installer::exiter::exit_program(
+ "ERROR: \"$uuid\" was already created before!",
+ "set_uuid_into_component_table");
+ }
$installer::globals::allcalculated_guids{$uuid} = 1;
$installer::globals::calculated_component_guids{$componentname} = $uuid;
# Setting new uuid
# $componenthash->{$componentname} = $uuid;
- # Setting flag
+ # Setting flag
# $installer::globals::created_new_component_guid = 1; # this is very important!
}
# }
${$componenttable}[$i] =~ s/COMPONENTGUID/$uuid/;
}
-
+
installer::files::save_file($componenttablename, $componenttable);
-
+
# if ( $installer::globals::created_new_component_guid )
# {
# # create new component file!
@@ -1212,7 +1210,7 @@ sub __set_uuid_into_component_table
# # All important data have to be saved in the directory: $installer::globals::infodirectory
# my $localcomponentfilename = $installer::globals::componentfilename;
# installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$localcomponentfilename);
-# $localcomponentfilename = $installer::globals::infodirectory . $installer::globals::separator . $localcomponentfilename;
+# $localcomponentfilename = $installer::globals::infodirectory . $installer::globals::separator . $localcomponentfilename;
# installer::files::save_file($localcomponentfilename, $componentfile);
#
# # installer::files::save_file($installer::globals::componentfilename, $componentfile); # version using new file in solver
@@ -1233,35 +1231,35 @@ sub __set_uuid_into_component_table
# RegLocator : +16 in type column to search in 64 bit registry.
# All conditions: "VersionNT" -> "VersionNT64" (several tables).
# Already done: "+256" in Attributes column of table "Component".
-# Still following: Setting "x64" instead of "Intel" in Summary
-# Information Stream of msi database in "get_template_for_sis".
+# Still following: Setting "x64" instead of "Intel" in Summary
+# Information Stream of msi database in "get_template_for_sis".
#########################################################################
sub prepare_64bit_database
{
my ($basedir, $allvariables) = @_;
-
+
my $infoline = "";
if (( $allvariables->{'64BITPRODUCT'} ) && ( $allvariables->{'64BITPRODUCT'} == 1 ))
- {
+ {
# 1. Beginning with table "RegLocat.idt". Adding "16" to the type.
my $reglocatfile = "";
my $reglocatfilename = $basedir . $installer::globals::separator . "RegLocat.idt";
-
+
if ( -f $reglocatfilename )
{
my $saving_required = 0;
$reglocatfile = installer::files::read_file($reglocatfilename);
for ( my $i = 3; $i <= $#{$reglocatfile}; $i++ ) # ignoring the first three lines
- {
+ {
my $oneline = ${$reglocatfile}[$i];
if ( $oneline =~ /^\s*\#/ ) { next; } # this is a comment line
if ( $oneline =~ /^\s*$/ ) { next; }
-
+
if ( $oneline =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(\d+)\s*$/ )
{
# Syntax: Signature_ Root Key Name Type
@@ -1270,55 +1268,55 @@ sub prepare_64bit_database
my $key = $3;
my $name = $4;
my $type = $5;
-
+
$type = $type + 16;
-
+
my $newline = $sig . "\t" . $root . "\t" . $key . "\t" . $name . "\t" . $type . "\n";
${$reglocatfile}[$i] = $newline;
-
+
$saving_required = 1;
}
}
-
+
if ( $saving_required )
{
# Saving the files
installer::files::save_file($reglocatfilename ,$reglocatfile);
- $infoline = "Making idt file 64 bit conform: $reglocatfilename\n";
+ $infoline = "Making idt file 64 bit conform: $reglocatfilename\n";
$installer::logger::Lang->print($infoline);
}
}
-
+
# 2. Replacing all occurrences of "VersionNT" by "VersionNT64"
-
+
my @versionnt_files = ("Componen.idt", "InstallE.idt", "InstallU.idt", "LaunchCo.idt");
-
+
foreach my $onefile ( @versionnt_files )
{
my $fullfilename = $basedir . $installer::globals::separator . $onefile;
-
+
if ( -f $fullfilename )
{
my $saving_required = 0;
- my $filecontent = installer::files::read_file($fullfilename);
+ my $filecontent = installer::files::read_file($fullfilename);
for ( my $i = 3; $i <= $#{$filecontent}; $i++ ) # ignoring the first three lines
{
my $oneline = ${$filecontent}[$i];
-
+
if ( $oneline =~ /\bVersionNT\b/ )
{
${$filecontent}[$i] =~ s/\bVersionNT\b/VersionNT64/g;
$saving_required = 1;
- }
+ }
}
-
+
if ( $saving_required )
{
# Saving the files
installer::files::save_file($fullfilename ,$filecontent);
- $infoline = "Making idt file 64 bit conform: $fullfilename\n";
- $installer::logger::Lang->print($infoline);
+ $infoline = "Making idt file 64 bit conform: $fullfilename\n";
+ $installer::logger::Lang->print($infoline);
}
}
}
@@ -1366,7 +1364,7 @@ sub include_cabs_into_msi
$infoline = "Systemcall: $systemcall\n";
$installer::logger::Lang->print($infoline);
-
+
if ($returnvalue)
{
$infoline = "ERROR: Could not execute $systemcall !\n";
@@ -1377,13 +1375,13 @@ sub include_cabs_into_msi
$infoline = "Success: Executed $systemcall successfully!\n";
$installer::logger::Lang->print($infoline);
}
-
+
# deleting the cab file
unlink(${$allcabfiles}[$i]);
$infoline = "Deleted cab file: ${$allcabfiles}[$i]\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
$infoline = "Changing back into directory: $from";
@@ -1411,7 +1409,7 @@ sub execute_packaging
chdir($to);
$infoline = "chdir: $to \n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
# if the ddf file contains relative paths, it is necessary to change into the temp directory
if ( $allvariables->{'RELATIVE_PATHES_IN_DDF'} )
@@ -1419,7 +1417,7 @@ sub execute_packaging
$to = $installer::globals::temppath;
chdir($to);
$infoline = "chdir: $to \n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
# changing the tmp directory, because makecab.exe generates temporary cab files
@@ -1431,9 +1429,9 @@ sub execute_packaging
my $allmakecabcalls = $#{$localpackjobref} + 1;
for ( my $i = 0; $i <= $#{$localpackjobref}; $i++ )
- {
+ {
my $systemcall = ${$localpackjobref}[$i];
-
+
my $callscounter = $i + 1;
$installer::logger::Info->printf("... makecab.exe (%s/%s) ... \n", $callscounter, $allmakecabcalls);
@@ -1441,7 +1439,7 @@ sub execute_packaging
# my $returnvalue = system($systemcall);
for ( my $n = 1; $n <= $maxmakecabcalls; $n++ )
- {
+ {
my @ddfoutput = ();
$infoline = "Systemcall: $systemcall";
@@ -1457,13 +1455,13 @@ sub execute_packaging
{
if ( $n < $maxmakecabcalls )
{
- $installer::logger::Info->printf("makecab_error (Try %s): Trying again\n", $n);
- $installer::logger::Lang->printf("makecab_error (Try %s): Trying again\n", $n);
+ $installer::logger::Info->printf("makecab_error (Try %s): Trying again\n", $n);
+ $installer::logger::Lang->printf("makecab_error (Try %s): Trying again\n", $n);
}
else
{
- $installer::logger::Info->printf("ERROR (Try %s): Abort packing \n", $n);
- $installer::logger::Lang->printf("ERROR (Try %s): Abort packing \n", $n);
+ $installer::logger::Info->printf("ERROR (Try %s): Abort packing \n", $n);
+ $installer::logger::Lang->printf("ERROR (Try %s): Abort packing \n", $n);
}
for ( my $m = 0; $m <= $#ddfoutput; $m++ )
@@ -1472,14 +1470,14 @@ sub execute_packaging
{
$infoline = $1 . "\n";
if ( $n < $maxmakecabcalls )
- {
- $infoline =~ s/ERROR\:/makecab_error\:/i;
- }
+ {
+ $infoline =~ s/ERROR\:/makecab_error\:/i;
+ }
$installer::logger::Info->print($infoline);
$installer::logger::Lang->print($infoline);
}
}
-
+
if ( $n == $maxmakecabcalls ) { installer::exiter::exit_program("ERROR: \"$systemcall\"!", "execute_packaging"); }
}
else
@@ -1498,66 +1496,66 @@ sub execute_packaging
chdir($from);
$infoline = "chdir: $from \n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
=head2 get_source_codes($languagesref)
- Return product code and upgrade code from the source version.
- When no source version is defined then return undef for both.
-
+ Return product code and upgrade code from the source version.
+ When no source version is defined then return undef for both.
+
=cut
sub get_source_codes ($)
{
- my ($languagesref) = @_;
-
- if ( ! $installer::globals::is_release)
- {
- return (undef, undef);
- }
- elsif ( ! defined $installer::globals::source_version)
- {
- $installer::logger::Lang->printf("no source version defined\n");
- return (undef, undef);
- }
-
- my $onelanguage = installer::languages::get_key_language($languagesref);
-
- my $release_data = installer::patch::ReleasesList::Instance()
- ->{$installer::globals::source_version}
- ->{$installer::globals::packageformat};
- if (defined $release_data)
- {
- my $normalized_language = installer::languages::get_normalized_language($languagesref);
- my $language_data = $release_data->{$normalized_language};
- if (defined $language_data)
- {
- $installer::logger::Lang->printf("source product code is %s\n", $language_data->{'product-code'});
- $installer::logger::Lang->printf("source upgrade code is %s\n", $release_data->{'upgrade-code'});
-
- return (
- $language_data->{'product-code'},
- $release_data->{'upgrade-code'}
- );
- }
- else
- {
- $installer::logger::Info->printf(
- "Warning: can not access information about previous version %s and language %s/%s/%s\n",
- $installer::globals::source_version,
- $onelanguage,
- join(", ",@$languagesref),
- $normalized_language);
- return (undef,undef);
- }
- }
- else
- {
- $installer::logger::Info->printf("Warning: can not access information about previous version %s\n",
- $installer::globals::source_version);
- return (undef,undef);
- }
+ my ($languagesref) = @_;
+
+ if ( ! $installer::globals::is_release)
+ {
+ return (undef, undef);
+ }
+ elsif ( ! defined $installer::globals::source_version)
+ {
+ $installer::logger::Lang->printf("no source version defined\n");
+ return (undef, undef);
+ }
+
+ my $onelanguage = installer::languages::get_key_language($languagesref);
+
+ my $release_data = installer::patch::ReleasesList::Instance()
+ ->{$installer::globals::source_version}
+ ->{$installer::globals::packageformat};
+ if (defined $release_data)
+ {
+ my $normalized_language = installer::languages::get_normalized_language($languagesref);
+ my $language_data = $release_data->{$normalized_language};
+ if (defined $language_data)
+ {
+ $installer::logger::Lang->printf("source product code is %s\n", $language_data->{'product-code'});
+ $installer::logger::Lang->printf("source upgrade code is %s\n", $release_data->{'upgrade-code'});
+
+ return (
+ $language_data->{'product-code'},
+ $release_data->{'upgrade-code'}
+ );
+ }
+ else
+ {
+ $installer::logger::Info->printf(
+ "Warning: can not access information about previous version %s and language %s/%s/%s\n",
+ $installer::globals::source_version,
+ $onelanguage,
+ join(", ",@$languagesref),
+ $normalized_language);
+ return (undef,undef);
+ }
+ }
+ else
+ {
+ $installer::logger::Info->printf("Warning: can not access information about previous version %s\n",
+ $installer::globals::source_version);
+ return (undef,undef);
+ }
}
@@ -1565,99 +1563,99 @@ sub get_source_codes ($)
=head2 set_global_code_variables ($languagesref, $allvariableshashref)
- Determine values for the product code and upgrade code of the target version.
+ Determine values for the product code and upgrade code of the target version.
- As preparation for building a Windows patch, certain conditions have to be fulfilled.
- - The upgrade code remains the same
- - The product code remains the same
- [this is still to be determined. For patches to work we need the same product codes but
- the install sets install only when the product codes differ.]
- In order to enforce that we have to access information about the source version.
+ As preparation for building a Windows patch, certain conditions have to be fulfilled.
+ - The upgrade code remains the same
+ - The product code remains the same
+ [this is still to be determined. For patches to work we need the same product codes but
+ the install sets install only when the product codes differ.]
+ In order to enforce that we have to access information about the source version.
- The resulting values are stored as global variables
- $installer::globals::productcode
- $installer::globals::upgradecode
- and as variables in the given hash
- $allvariableshashref->{'PRODUCTCODE'}
- $allvariableshashref->{'UPGRADECODE'}
+ The resulting values are stored as global variables
+ $installer::globals::productcode
+ $installer::globals::upgradecode
+ and as variables in the given hash
+ $allvariableshashref->{'PRODUCTCODE'}
+ $allvariableshashref->{'UPGRADECODE'}
=cut
sub set_global_code_variables ($$)
{
my ($languagesref, $allvariableshashref) = @_;
- my ($source_product_code, $source_upgrade_code) = get_source_codes($languagesref);
- my ($target_product_code, $target_upgrade_code) = (undef, undef);
-
- if (defined $source_product_code && defined $source_upgrade_code)
- {
- if ($installer::globals::is_major_release)
- {
- # For a major release we have to change the product code.
- $target_product_code = "{" . create_guid() . "}";
- $installer::logger::Lang->printf("building a major release, created new product code %s\n",
- $target_product_code);
-
- # Let's do a paranoia check that the new and the old guids are
- # different. In reality the new guid really has to be
- # different from all other guids used for * codes, components,
- # etc.
- if ($target_product_code eq $source_product_code)
- {
- installer::logger::PrintError(
- "new GUID for product code is the same as the old product code but should be different.");
- }
- }
- else
- {
- # For minor or micro releases we have to keeep the old product code.
- $target_product_code = "{" . $source_product_code . "}";
- $installer::logger::Lang->printf("building a minor or micro release, reusing product code %s\n",
- $target_product_code);
- }
-
- $target_upgrade_code = "{" . create_guid() . "}";
- # Again, just one test for paranoia.
- if ($target_upgrade_code eq $source_upgrade_code)
- {
- installer::logger::PrintError(
- "new GUID for upgrade code is the same as the old upgrade code but should be different.");
- }
- }
- else
- {
- # There is no previous version with which to compare the product code.
- # Just create two new uuids.
- $target_product_code = "{" . create_guid() . "}";
- $target_upgrade_code = "{" . create_guid() . "}";
- $installer::logger::Lang->printf("there is no source version => created new guids\n");
- }
-
- # Keep the upgrade code constant between versions. Read it from the codes.txt file.
- # Note that this handles regular installation sets and language packs.
- my $onelanguage = ${$languagesref}[0];
- $installer::logger::Lang->printf("reading upgrade code for language %s from %s\n",
- $onelanguage,
- $installer::globals::codefilename);
- if (defined $installer::globals::codefilename)
- {
- my $code_filename = $installer::globals::codefilename;
- installer::files::check_file($code_filename);
- my $codefile = installer::files::read_file($code_filename);
- my $searchstring = "UPGRADECODE";
- my $codeblock = installer::windows::idtglobal::get_language_block_from_language_file(
- $searchstring,
- $codefile);
- $target_upgrade_code = installer::windows::idtglobal::get_language_string_from_language_block(
- $codeblock,
- $onelanguage,
- "");
- }
- # else use the previously generated upgrade code.
-
- $installer::globals::productcode = $target_product_code;
- $installer::globals::upgradecode = $target_upgrade_code;
- $allvariableshashref->{'PRODUCTCODE'} = $target_product_code;
+ my ($source_product_code, $source_upgrade_code) = get_source_codes($languagesref);
+ my ($target_product_code, $target_upgrade_code) = (undef, undef);
+
+ if (defined $source_product_code && defined $source_upgrade_code)
+ {
+ if ($installer::globals::is_major_release)
+ {
+ # For a major release we have to change the product code.
+ $target_product_code = "{" . create_guid() . "}";
+ $installer::logger::Lang->printf("building a major release, created new product code %s\n",
+ $target_product_code);
+
+ # Let's do a paranoia check that the new and the old guids are
+ # different. In reality the new guid really has to be
+ # different from all other guids used for * codes, components,
+ # etc.
+ if ($target_product_code eq $source_product_code)
+ {
+ installer::logger::PrintError(
+ "new GUID for product code is the same as the old product code but should be different.");
+ }
+ }
+ else
+ {
+ # For minor or micro releases we have to keep the old product code.
+ $target_product_code = "{" . $source_product_code . "}";
+ $installer::logger::Lang->printf("building a minor or micro release, reusing product code %s\n",
+ $target_product_code);
+ }
+
+ $target_upgrade_code = "{" . create_guid() . "}";
+ # Again, just one test for paranoia.
+ if ($target_upgrade_code eq $source_upgrade_code)
+ {
+ installer::logger::PrintError(
+ "new GUID for upgrade code is the same as the old upgrade code but should be different.");
+ }
+ }
+ else
+ {
+ # There is no previous version with which to compare the product code.
+ # Just create two new uuids.
+ $target_product_code = "{" . create_guid() . "}";
+ $target_upgrade_code = "{" . create_guid() . "}";
+ $installer::logger::Lang->printf("there is no source version => created new guids\n");
+ }
+
+ # Keep the upgrade code constant between versions. Read it from the codes.txt file.
+ # Note that this handles regular installation sets and language packs.
+ my $onelanguage = ${$languagesref}[0];
+ $installer::logger::Lang->printf("reading upgrade code for language %s from %s\n",
+ $onelanguage,
+ $installer::globals::codefilename);
+ if (defined $installer::globals::codefilename)
+ {
+ my $code_filename = $installer::globals::codefilename;
+ installer::files::check_file($code_filename);
+ my $codefile = installer::files::read_file($code_filename);
+ my $searchstring = "UPGRADECODE";
+ my $codeblock = installer::windows::idtglobal::get_language_block_from_language_file(
+ $searchstring,
+ $codefile);
+ $target_upgrade_code = installer::windows::idtglobal::get_language_string_from_language_block(
+ $codeblock,
+ $onelanguage,
+ "");
+ }
+ # else use the previously generated upgrade code.
+
+ $installer::globals::productcode = $target_product_code;
+ $installer::globals::upgradecode = $target_upgrade_code;
+ $allvariableshashref->{'PRODUCTCODE'} = $target_product_code;
$allvariableshashref->{'UPGRADECODE'} = $target_upgrade_code;
$installer::logger::Lang->printf("target product code is %s\n", $target_product_code);
@@ -1690,7 +1688,7 @@ sub set_msiproductversion
$productmicro = "0" . $productmicro while ( length ( $productminor . $productmicro ) < 3 );
$productminor .= $productmicro;
}
- elsif ( $productversion =~ /^\s*(\d+)\.(\d+)\s*$/ )
+ elsif ( $productversion =~ /^\s*(\d+)\.(\d+)\s*$/ )
{
$productmajor = $1;
$productminor = $2;
@@ -1701,16 +1699,16 @@ sub set_msiproductversion
{
if ( $allvariables->{'PACKAGEVERSION'} =~ /^\s*(\d+)\.(\d+)\.(\d+)\s*$/ ) { $productminor = $2; }
}
-
+
$productmajor = $productversion;
}
$productminor .= "0" while ( length( $productminor ) < 3);
$productversion = $productmajor . "\." . $productminor . "\." . $installer::globals::buildid;
-
+
$installer::globals::msiproductversion = $productversion;
-
+
# Setting $installer::globals::msimajorproductversion, to differ between old version in upgrade table
-
+
if ( $installer::globals::msiproductversion =~ /^\s*(\d+)\./ )
{
my $major = $1;
@@ -1748,7 +1746,7 @@ sub put_msiproductversion_into_bootstrapfile
####################################################################################
# Updating the file Property.idt dynamically
-# Content:
+# Content:
# Property Value
####################################################################################
@@ -1757,13 +1755,13 @@ sub update_reglocat_table
my ($basedir, $allvariables) = @_;
my $reglocatfilename = $basedir . $installer::globals::separator . "RegLocat.idt";
-
+
# Only do something, if this file exists
-
+
if ( -f $reglocatfilename )
{
my $reglocatfile = installer::files::read_file($reglocatfilename);
-
+
my $layername = "";
if ( $allvariables->{'REGISTRYLAYERNAME'} )
{
@@ -1778,11 +1776,11 @@ sub update_reglocat_table
installer::exiter::exit_program("ERROR: Variable \"REGISTRYLAYERNAME\" has to be defined", "update_reglocat_table");
}
}
- }
+ }
if ( $layername ne "" )
{
- # Updating the layername in
+ # Updating the layername in
for ( my $i = 0; $i <= $#{$reglocatfile}; $i++ )
{
@@ -1791,7 +1789,7 @@ sub update_reglocat_table
# Saving the file
installer::files::save_file($reglocatfilename ,$reglocatfile);
- my $infoline = "Updated idt file: $reglocatfilename\n";
+ my $infoline = "Updated idt file: $reglocatfilename\n";
$installer::logger::Lang->print($infoline);
}
}
@@ -1809,9 +1807,9 @@ sub update_removere_table
my ($basedir) = @_;
my $removeregistryfilename = $basedir . $installer::globals::separator . "RemoveRe.idt";
-
+
# Only do something, if this file exists
-
+
if ( -f $removeregistryfilename )
{
my $removeregistryfile = installer::files::read_file($removeregistryfilename);
@@ -1826,10 +1824,9 @@ sub update_removere_table
# Saving the file
installer::files::save_file($removeregistryfilename ,$removeregistryfile);
- my $infoline = "Updated idt file: $removeregistryfilename \n";
+ my $infoline = "Updated idt file: $removeregistryfilename \n";
$installer::logger::Lang->print($infoline);
}
}
-
1;
diff --git a/main/solenv/bin/modules/installer/windows/sign.pm b/main/solenv/bin/modules/installer/windows/sign.pm
index 664ab66aaf..8a4934a2ce 100644
--- a/main/solenv/bin/modules/installer/windows/sign.pm
+++ b/main/solenv/bin/modules/installer/windows/sign.pm
@@ -1,5 +1,5 @@
#**************************************************************
-#
+#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
@@ -7,20 +7,18 @@
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
-#
+#
# http://www.apache.org/licenses/LICENSE-2.0
-#
+#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
-#
+#
#**************************************************************
-
-
package installer::windows::sign;
use Cwd;
@@ -54,11 +52,11 @@ sub copy_install_set
if ( $dirname =~ /\./ ) { $dirname =~ s/\./_signed_inprogress./; }
else { $dirname = $dirname . "_signed_inprogress"; }
-
+
my $newpath = $path . $installer::globals::separator . $dirname;
my $removepath = $newpath;
$removepath =~ s/_inprogress/_witherror/;
-
+
if ( -d $newpath ) { installer::systemactions::remove_complete_directory($newpath, 1); }
if ( -d $removepath ) { installer::systemactions::remove_complete_directory($removepath, 1); }
@@ -92,11 +90,11 @@ sub rename_install_set
if ( $dirname =~ /\./ ) { $dirname =~ s/\./_inprogress./; }
else { $dirname = $dirname . "_inprogress"; }
-
+
my $newpath = $path . $installer::globals::separator . $dirname;
my $removepath = $newpath;
$removepath =~ s/_inprogress/_witherror/;
-
+
if ( -d $newpath ) { installer::systemactions::remove_complete_directory($newpath, 1); }
if ( -d $removepath ) { installer::systemactions::remove_complete_directory($removepath, 1); }
@@ -123,26 +121,26 @@ sub check_system_path
push(@needed_files_in_path, "makecab.exe");
}
- my $onefile;
+ my $onefile;
my $error = 0;
my $pathvariable = $ENV{'PATH'};
my $local_pathseparator = $installer::globals::pathseparator;
-
+
if( $^O =~ /cygwin/i )
- { # When using cygwin's perl the PATH variable is POSIX style and ...
+ { # When using Cygwin's perl the PATH variable is POSIX style and ...
$pathvariable = qx{cygpath -mp "$pathvariable"} ;
# has to be converted to DOS style for further use.
$local_pathseparator = ';';
}
-
+
my $patharrayref = installer::converter::convert_stringlist_into_array(\$pathvariable, $local_pathseparator);
-
+
$installer::globals::patharray = $patharrayref;
-
+
foreach my $onefile ( @needed_files_in_path )
{
- $installer::logger::Info->printf("...... searching %s ...\n", $onefile);
+ $installer::logger::Info->printf("...... searching %s ...\n", $onefile);
my $fileref = installer::scriptitems::get_sourcepath_from_filename_and_includepath_classic(\$onefile, $patharrayref , 0);
@@ -153,8 +151,8 @@ sub check_system_path
}
else
{
- $installer::logger::Info->printf("\tFound: %s\n", $$fileref);
- }
+ $installer::logger::Info->printf("\tFound: %s\n", $$fileref);
+ }
}
$installer::globals::signfiles_checked = 1;
@@ -170,7 +168,7 @@ sub make_systemcall
{
my ($systemcall, $displaysystemcall) = @_;
- $installer::logger::Info->printf("... %s ...\n", $displaysystemcall);
+ $installer::logger::Info->printf("... %s ...\n", $displaysystemcall);
my $success = 1;
my $returnvalue = system($systemcall);
@@ -189,9 +187,9 @@ sub make_systemcall
$infoline = "Success: Executed \"$displaysystemcall\" successfully!\n";
$installer::logger::Lang->print($infoline);
}
-
+
return $success;
-}
+}
######################################################
# Making systemcall with warning
@@ -201,7 +199,7 @@ sub make_systemcall_with_warning
{
my ($systemcall, $displaysystemcall) = @_;
- $installer::logger::Info->printf("... %s ...\n", $displaysystemcall);
+ $installer::logger::Info->printf("... %s ...\n", $displaysystemcall);
my $success = 1;
my $returnvalue = system($systemcall);
@@ -220,9 +218,9 @@ sub make_systemcall_with_warning
$infoline = "Success: Executed \"$displaysystemcall\" successfully!\n";
$installer::logger::Lang->print($infoline);
}
-
+
return $success;
-}
+}
######################################################
# Making systemcall with more return data
@@ -276,14 +274,14 @@ sub execute_open_system_call
sub get_pw
{
my ( $file ) = @_;
-
+
my $filecontent = installer::files::read_file($file);
my $pw = ${$filecontent}[0];
- $pw =~ s/^\s*//;
+ $pw =~ s/^\s*//;
$pw =~ s/\s*$//;
-
- return $pw;
+
+ return $pw;
}
########################################################
@@ -293,16 +291,16 @@ sub get_pw
sub get_hash_count
{
my ($hashref) = @_;
-
+
my $counter = 0;
-
+
foreach my $key ( keys %{$hashref} ) { $counter++; }
-
+
return $counter;
}
############################################################
-# Collect all last files in a cabinet file. This is
+# Collect all last files in a cabinet file. This is
# necessary to control, if the cabinet file was damaged
# by calling signtool.exe.
############################################################
@@ -336,7 +334,7 @@ sub analyze_file_file
sub analyze_media_file
{
my ($filecontent) = @_;
-
+
my %diskidhash = ();
my %lastsequencehash = ();
@@ -365,7 +363,7 @@ sub analyze_media_file
sub collect_diskid_from_media_table
{
my ($msidatabase, $languagestring) = @_;
-
+
# creating working directory
my $workdir = installer::systemactions::create_directories("media", \$languagestring);
installer::windows::admin::extract_tables_from_pcpfile($msidatabase, $workdir, "Media File");
@@ -393,13 +391,13 @@ sub collect_diskid_from_media_table
sub check_for_internal_cabfiles
{
my ($cabfilehash) = @_;
-
+
my $contains_internal_cabfiles = 0;
my %allcabfileshash = ();
-
+
foreach my $filename ( keys %{$cabfilehash} )
{
- if ( $filename =~ /^\s*\#/ ) # starting with a hash
+ if ( $filename =~ /^\s*\#/ ) # starting with a hash
{
$contains_internal_cabfiles = 1;
# setting real filename without hash as key and name with hash as value
@@ -408,7 +406,7 @@ sub check_for_internal_cabfiles
$allcabfileshash{$realfilename} = $filename;
}
}
-
+
return ( $contains_internal_cabfiles, \%allcabfileshash );
}
@@ -450,11 +448,11 @@ sub analyze_installset_content
$allfileshash{$sourcefiles[$j]} = 1;
}
}
-
+
# Is there at least one cab file in the installation set?
my $cabcounter = get_hash_count(\%allcabfileshash);
if ( $cabcounter > 0 ) { $contains_external_cabfiles = 1; }
-
+
# How about a cab file without a msi database?
if (( $cabcounter > 0 ) && ( $msidatabase eq "" )) { installer::exiter::exit_program("ERROR: There is no msi database in the installation set, but an external cabinet file. Path: $installsetpath !", "collect_installset_content"); }
@@ -477,22 +475,22 @@ sub msicert_database
foreach my $cabfile ( keys %{$allcabfiles} )
{
my $origfilesize = -s $cabfile;
-
+
my $mediacabfilename = $cabfile;
if ( $internalcabfile ) { $mediacabfilename = "\#" . $mediacabfilename; }
if ( ! exists($cabfilehash->{$mediacabfilename}) ) { installer::exiter::exit_program("ERROR: Could not determine DiskId from media table for cabinet file \"$cabfile\" !", "msicert_database"); }
my $diskid = $cabfilehash->{$mediacabfilename};
my $systemcall = "msicert.exe -d $msidatabase -m $diskid -c $cabfile -h";
- $success = make_systemcall($systemcall, $systemcall);
+ $success = make_systemcall($systemcall, $systemcall);
if ( ! $success ) { $fullsuccess = 0; }
- # size of cabinet file must not change
+ # size of cabinet file must not change
my $finalfilesize = -s $cabfile;
-
+
if ( $origfilesize != $finalfilesize ) { installer::exiter::exit_program("ERROR: msicert.exe changed size of cabinet file !", "msicert_database"); }
}
-
+
return $fullsuccess;
}
@@ -503,8 +501,8 @@ sub msicert_database
sub cabinet_cosistency_check
{
my ( $onefile, $followmeinfohash, $filenamehash, $lastsequencehash, $temppath ) = @_;
-
- my $infoline = "Making consistency check of $onefile\n";
+
+ my $infoline = "Making consistency check of $onefile\n";
$installer::logger::Lang->print($infoline);
my $expandfile = "expand.exe"; # Has to be in the path
@@ -513,63 +511,63 @@ sub cabinet_cosistency_check
$expandfile = qx(cygpath -u "$ENV{WINDIR}"/System32/expand.exe);
chomp $expandfile;
}
-
+
if ( $filenamehash == 0 )
{
$infoline = "Warning: Stopping consistency check: Important hash of filenames is empty!\n";
$installer::logger::Lang->print($infoline);
}
- elsif ( $lastsequencehash == 0 )
+ elsif ( $lastsequencehash == 0 )
{
$infoline = "Warning: Stopping consistency check; Important hash of last sequences is empty!\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
else # both hashes are available
{
# $onefile contains only the name of the cabinet file without path
- my $sequence = $lastsequencehash->{$onefile};
- my $lastfile = $filenamehash->{$sequence};
+ my $sequence = $lastsequencehash->{$onefile};
+ my $lastfile = $filenamehash->{$sequence};
$infoline = "Check of $onefile: Sequence: $sequence is file: $lastfile\n";
$installer::logger::Lang->print($infoline);
-
- # Therefore the file $lastfile need to be binary compared.
- # It has to be expanded from the cabinet file
- # of the original installation set and from the
- # newly signed cabinet file.
-
+
+ # Therefore the file $lastfile need to be binary compared.
+ # It has to be expanded from the cabinet file
+ # of the original installation set and from the
+ # newly signed cabinet file.
+
# How about cabinet files extracted from msi database?
my $finalinstalldir = $followmeinfohash->{'finalinstalldir'};
-
+
$finalinstalldir =~ s/\\\s*$//;
$finalinstalldir =~ s/\/\s*$//;
my $sourcecabfile = $finalinstalldir . $installer::globals::separator . $onefile;
my $currentpath = cwd();
my $destcabfile = $currentpath . $installer::globals::separator . $onefile;
# my $destcabfile = $onefile;
-
+
if ( $^O =~ /cygwin/i )
{
chomp( $destcabfile = qx{cygpath -w "$destcabfile"} );
$destcabfile =~ s/\\/\//g;
}
- if ( ! -f $sourcecabfile )
+ if ( ! -f $sourcecabfile )
{
$infoline = "WARNING: Check of cab file cannot happen, because source cabinet file was not found: $sourcecabfile\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
- elsif ( ! -f $destcabfile )
+ elsif ( ! -f $destcabfile )
{
$infoline = "WARNING: Check of cab file cannot happen, because destination cabinet file was not found: $sourcecabfile\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
}
else # everything is okay for the check
{
my $diffpath = get_diff_path($temppath);
-
+
my $origdiffpath = $diffpath . $installer::globals::separator . "orig";
my $newdiffpath = $diffpath . $installer::globals::separator . "new";
-
+
if ( ! -d $origdiffpath ) { mkdir($origdiffpath); }
if ( ! -d $newdiffpath ) { mkdir($newdiffpath); }
@@ -579,26 +577,26 @@ sub cabinet_cosistency_check
my $success = make_systemcall($systemcall, $systemcall);
if ( ! $success ) { installer::exiter::exit_program("ERROR: Could not successfully execute: $systemcall !", "cabinet_cosistency_check"); }
-
+
$systemcall = "$expandfile $destcabfile $newdiffpath -f:$lastfile ";
$infoline = $systemcall . "\n";
$installer::logger::Lang->print($infoline);
-
+
$success = make_systemcall($systemcall, $systemcall);
if ( ! $success ) { installer::exiter::exit_program("ERROR: Could not successfully execute: $systemcall !", "cabinet_cosistency_check"); }
# and finally the two files can be diffed.
- my $origfile = $origdiffpath . $installer::globals::separator . $lastfile;
+ my $origfile = $origdiffpath . $installer::globals::separator . $lastfile;
my $newfile = $newdiffpath . $installer::globals::separator . $lastfile;
-
+
if ( ! -f $origfile ) { installer::exiter::exit_program("ERROR: Unpacked original file not found: $origfile !", "cabinet_cosistency_check"); }
if ( ! -f $newfile ) { installer::exiter::exit_program("ERROR: Unpacked new file not found: $newfile !", "cabinet_cosistency_check"); }
-
+
my $origsize = -s $origfile;
my $newsize = -s $newfile;
-
+
if ( $origsize != $newsize ) # This shows an error!
- {
+ {
$infoline = "ERROR: Different filesize after signtool.exe was used. Original: $origsize Bytes, new: $newsize. File: $lastfile\n";
$installer::logger::Lang->print($infoline);
installer::exiter::exit_program("ERROR: The cabinet file $destcabfile is broken after signtool.exe signed this file !", "cabinet_cosistency_check");
@@ -610,8 +608,8 @@ sub cabinet_cosistency_check
# Also making a binary diff?
- my $difffile = "diff.exe"; # has to be in the path
- # $systemcall = "$difffile $sourcecabfile $destcabfile"; # Test for differences
+ my $difffile = "diff.exe"; # has to be in the path
+ # $systemcall = "$difffile $sourcecabfile $destcabfile"; # Test for differences
$systemcall = "$difffile $origfile $newfile";
$infoline = $systemcall . "\n";
$returnvalue = make_systemcall($systemcall, $systemcall);
@@ -626,18 +624,18 @@ sub cabinet_cosistency_check
elsif ( $success == 1 )
{
$infoline = "ERROR: Last files are different after signing cabinet file (File: $lastfile)\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
installer::exiter::exit_program("ERROR: Last files are different after signing cabinet file (File: $lastfile)!", "cabinet_cosistency_check");
- }
+ }
else
{
$infoline = "ERROR: Problem occurred calling diff.exe (File: $lastfile)\n";
- $installer::logger::Lang->print($infoline);
+ $installer::logger::Lang->print($infoline);
installer::exiter::exit_program("ERROR: Problem occurred calling diff.exe (File: $lastfile) !", "cabinet_cosistency_check");
}
}
- }
- }
+ }
+ }
}
@@ -648,25 +646,25 @@ sub cabinet_cosistency_check
sub sign_files
{
my ( $followmeinfohash, $allfiles, $pw, $cabinternal, $filenamehash, $lastsequencehash, $temppath ) = @_;
-
+
my $infoline = "";
my $fullsuccess = 1;
my $maxcounter = 3;
-
+
my $productname = "";
if ( $followmeinfohash->{'allvariableshash'}->{'PRODUCTNAME'} ) { $productname = "/d " . "\"$followmeinfohash->{'allvariableshash'}->{'PRODUCTNAME'}\""; }
my $url = "/du " . "\"http://www.openoffice.org\"";
my $timestampurl = "http://timestamp.verisign.com/scripts/timestamp.dll";
-
+
my $pfxfilepath = $installer::globals::pfxfile;
-
+
if( $^O =~ /cygwin/i )
{
$pfxfilepath = qx{cygpath -w "$pfxfilepath"};
$pfxfilepath =~ s/\\/\\\\/g;
$pfxfilepath =~ s/\s*$//g;
}
-
+
foreach my $onefile ( reverse sort keys %{$allfiles} )
{
if ( already_certified($onefile) )
@@ -675,41 +673,41 @@ sub sign_files
$installer::logger::Lang->print($infoline);
next;
}
-
+
my $counter = 1;
my $success = 0;
-
+
while (( $counter <= $maxcounter ) && ( ! $success ))
{
if ( $counter > 1 )
- {
- $installer::logger::Info->printf("\n");
- $installer::logger::Info->printf("\n");
- $installer::logger::Info->printf("... repeating file %s ...\n", $onefile);
- }
+ {
+ $installer::logger::Info->printf("\n");
+ $installer::logger::Info->printf("\n");
+ $installer::logger::Info->printf("... repeating file %s ...\n", $onefile);
+ }
if ( $cabinternal )
- {
- $installer::logger::Info->printf(" Signing: %s\n", $onefile);
- }
+ {
+ $installer::logger::Info->printf(" Signing: %s\n", $onefile);
+ }
my $systemcall = "signtool.exe sign /f \"$pfxfilepath\" /p $pw $productname $url /t \"$timestampurl\" \"$onefile\"";
my $displaysystemcall = "signtool.exe sign /f \"$pfxfilepath\" /p ***** $productname $url /t \"$timestampurl\" \"$onefile\"";
- $success = make_systemcall_with_warning($systemcall, $displaysystemcall);
- $counter++;
- }
-
- # Special check for cabinet files, that sometimes get damaged by signtool.exe
- if (( $success ) && ( $onefile =~ /\.cab\s*$/ ) && ( ! $cabinternal ))
- {
- cabinet_cosistency_check($onefile, $followmeinfohash, $filenamehash, $lastsequencehash, $temppath);
+ $success = make_systemcall_with_warning($systemcall, $displaysystemcall);
+ $counter++;
+ }
+
+ # Special check for cabinet files, that sometimes get damaged by signtool.exe
+ if (( $success ) && ( $onefile =~ /\.cab\s*$/ ) && ( ! $cabinternal ))
+ {
+ cabinet_cosistency_check($onefile, $followmeinfohash, $filenamehash, $lastsequencehash, $temppath);
}
- if ( ! $success )
- {
- $fullsuccess = 0;
+ if ( ! $success )
+ {
+ $fullsuccess = 0;
installer::exiter::exit_program("ERROR: Could not sign file: $onefile!", "sign_files");
}
}
-
+
return $fullsuccess;
}
@@ -729,23 +727,23 @@ sub check_ddf_file
for ( my $i = 0; $i <= $#{$ddffile}; $i++ )
{
my $oneline = ${$ddffile}[$i];
-
+
$linelength = length($oneline);
$linenumber = $i + 1;
-
+
if ( $linelength > 256 )
{
installer::exiter::exit_program("ERROR \"$ddffilename\" line $linenumber: Lines in ddf files must not contain more than 256 characters!", "check_ddf_file");
}
-
+
if ( $linelength > $maxlength )
{
$maxlength = $linelength;
$maxline = $linenumber;
}
}
-
- my $infoline = "Check of ddf file \"$ddffilename\": Maximum length \"$maxlength\" in line \"$maxline\" (allowed line length: 256 characters)\n";
+
+ my $infoline = "Check of ddf file \"$ddffilename\": Maximum length \"$maxlength\" in line \"$maxline\" (allowed line length: 256 characters)\n";
$installer::logger::Lang->print($infoline);
}
@@ -761,7 +759,7 @@ sub get_cab_path
$cabpath = $temppath . $installer::globals::separator . $cabpath;
if ( ! -d $cabpath ) { installer::systemactions::create_directory($cabpath); }
- return $cabpath;
+ return $cabpath;
}
#################################################################
@@ -776,7 +774,7 @@ sub get_diff_path
$diffpath = $temppath . $installer::globals::separator . $diffpath;
if ( ! -d $diffpath ) { installer::systemactions::create_directory($diffpath); }
- return $diffpath;
+ return $diffpath;
}
#################################################################
@@ -799,15 +797,15 @@ sub extract_cabs_from_database
foreach my $onefile ( keys %{$allcabfiles} )
{
my $systemcall = $msidb . " -d " . $msidatabase . " -x " . $onefile;
- my $success = make_systemcall($systemcall, $systemcall);
+ my $success = make_systemcall($systemcall, $systemcall);
if ( ! $success ) { $fullsuccess = 0; }
-
+
# and removing the stream from the database
$systemcall = $msidb . " -d " . $msidatabase . " -k " . $onefile;
- $success = make_systemcall($systemcall, $systemcall);
+ $success = make_systemcall($systemcall, $systemcall);
if ( ! $success ) { $fullsuccess = 0; }
}
-
+
return $fullsuccess;
}
@@ -831,10 +829,10 @@ sub include_cabs_into_database
foreach my $onefile ( keys %{$allcabfiles} )
{
my $systemcall = $msidb . " -d " . $msidatabase . " -a " . $onefile;
- my $success = make_systemcall($systemcall, $systemcall);
+ my $success = make_systemcall($systemcall, $systemcall);
if ( ! $success ) { $fullsuccess = 0; }
}
-
+
return $fullsuccess;
}
@@ -847,18 +845,18 @@ sub read_cab_file
{
my ($cabfilename) = @_;
- $installer::logger::Info->printf("\n");
- $installer::logger::Info->printf("... reading cabinet file %s ...\n", $cabfilename);
+ $installer::logger::Info->printf("\n");
+ $installer::logger::Info->printf("... reading cabinet file %s ...\n", $cabfilename);
my $infoline = "Reading cabinet file $cabfilename\n";
$installer::logger::Lang->print($infoline);
my $systemcall = "cabarc.exe" . " L " . $cabfilename;
push(@logfile, "$systemcall\n");
-
+
my ($success, $fileorder) = execute_open_system_call($systemcall);
my @allfiles = ();
-
+
for ( my $i = 0; $i <= $#{$fileorder}; $i++ )
{
my $line = ${$fileorder}[$i];
@@ -868,7 +866,7 @@ sub read_cab_file
push(@allfiles, $filename);
}
}
-
+
return \@allfiles;
}
@@ -880,14 +878,14 @@ sub unpack_cab_file
{
my ($cabfilename, $temppath) = @_;
- $installer::logger::Info->printf("\n");
- $installer::logger::Info->printf("... unpacking cabinet file %s ...\n", $cabfilename);
+ $installer::logger::Info->printf("\n");
+ $installer::logger::Info->printf("... unpacking cabinet file %s ...\n", $cabfilename);
my $infoline = "Unpacking cabinet file $cabfilename\n";
$installer::logger::Lang->print($infoline);
-
+
my $dirname = $cabfilename;
$dirname =~ s/\.cab\s*$//;
- my $workingpath = $temppath . $installer::globals::separator . "unpack_". $dirname . "_" . $$;
+ my $workingpath = $temppath . $installer::globals::separator . "unpack_". $dirname . "_" . $$;
if ( ! -d $workingpath ) { installer::systemactions::create_directory($workingpath); }
# changing into unpack directory
@@ -920,7 +918,7 @@ sub unpack_cab_file
sub get_ddf_file_header
{
my ($ddffileref, $cabinetfile, $installdir) = @_;
-
+
my $oneline;
my $compressionlevel = 2;
@@ -929,7 +927,7 @@ sub get_ddf_file_header
$installdir = qx{cygpath -w "$installdir"};
$installdir =~ s/\s*$//g;
}
-
+
$oneline = ".Set CabinetName1=" . $cabinetfile . "\n";
push(@{$ddffileref} ,$oneline);
$oneline = ".Set ReservePerCabinetSize=128\n"; # This reserves space for a digital signature.
@@ -976,8 +974,8 @@ sub do_pack_cab_file
{
my ($cabfilename, $allfiles, $workingpath, $temppath) = @_;
- $installer::logger::Info->print("\n");
- $installer::logger::Info->printf("... packing cabinet file %s ...\n", $cabfilename);
+ $installer::logger::Info->print("\n");
+ $installer::logger::Info->printf("... packing cabinet file %s ...\n", $cabfilename);
my $infoline = "Packing cabinet file $cabfilename\n";
$installer::logger::Lang->print($infoline);
@@ -989,12 +987,12 @@ sub do_pack_cab_file
my $dirname = $cabfilename;
$dirname =~ s/\.cab\s*$//;
- my $ddfpath = $temppath . $installer::globals::separator . "ddf_". $dirname . "_" . $$;
+ my $ddfpath = $temppath . $installer::globals::separator . "ddf_". $dirname . "_" . $$;
my $ddffilename = $cabfilename;
$ddffilename =~ s/.cab/.ddf/;
$ddffilename = $ddfpath . $installer::globals::separator . $ddffilename;
-
+
if ( ! -d $ddfpath ) { installer::systemactions::create_directory($ddfpath); }
my $from = cwd();
@@ -1005,7 +1003,7 @@ sub do_pack_cab_file
put_all_files_into_ddffile(\@ddffile, $allfiles, $workingpath);
# lines in ddf files must not be longer than 256 characters
check_ddf_file(\@ddffile, $ddffilename);
-
+
installer::files::save_file($ddffilename, \@ddffile);
if( $^O =~ /cygwin/i )
@@ -1021,7 +1019,7 @@ sub do_pack_cab_file
chdir($from);
- return ($success);
+ return ($success);
}
########################################################
@@ -1031,12 +1029,12 @@ sub do_pack_cab_file
sub get_extension
{
my ( $file ) = @_;
-
+
my $extension = "";
-
+
if ( $file =~ /^\s*(.*)\.(\w+?)\s*$/ ) { $extension = $2; }
-
- return $extension;
+
+ return $extension;
}
########################################################
@@ -1047,21 +1045,21 @@ sub get_extension
sub already_certified
{
my ( $filename ) = @_;
-
- my $success = 1;
+
+ my $success = 1;
my $is_certified = 0;
-
+
my $systemcall = "signtool.exe verify /q /pa \"$filename\"";
my $returnvalue = system($systemcall);
-
+
if ( $returnvalue ) { $success = 0; }
# my $success = make_systemcall($systemcall, $systemcall);
- if ( $success )
- {
- $is_certified = 1;
- $installer::logger::Info->printf("... already certified -> skipping %s ...\n", $filename);
+ if ( $success )
+ {
+ $is_certified = 1;
+ $installer::logger::Info->printf("... already certified -> skipping %s ...\n", $filename);
}
return $is_certified;
@@ -1082,7 +1080,7 @@ sub sign_files_in_cabinet_files
foreach my $cabfilename ( keys %{$allcabfiles} )
{
my $success = 1;
-
+
# saving order of files in cab file
my $fileorder = read_cab_file($cabfilename);
@@ -1101,15 +1099,15 @@ sub sign_files_in_cabinet_files
$allfileshash{$onefile} = 1;
}
}
- $success = sign_files($followmeinfohash, \%allfileshash, $pw, 1, 0, 0, $temppath);
+ $success = sign_files($followmeinfohash, \%allfileshash, $pw, 1, 0, 0, $temppath);
if ( ! $success ) { $complete_success = 0; }
chdir($from);
-
+
# pack into new directory
do_pack_cab_file($cabfilename, $fileorder, $workingpath, $temppath);
}
-
+
return $complete_success;
}
@@ -1121,7 +1119,7 @@ sub sign_files_in_cabinet_files
sub compare_directories
{
my ( $dir1, $dir2, $files ) = @_;
-
+
$dir1 =~ s/\\\s*//;
$dir2 =~ s/\\\s*//;
$dir1 =~ s/\/\s*//;
@@ -1129,12 +1127,12 @@ sub compare_directories
my $infoline = "Comparing directories: $dir1 and $dir2\n";
$installer::logger::Lang->print($infoline);
-
+
foreach my $onefile ( @{$files} )
{
my $file1 = $dir1 . $installer::globals::separator . $onefile;
my $file2 = $dir2 . $installer::globals::separator . $onefile;
-
+
if ( ! -f $file1 ) { installer::exiter::exit_program("ERROR: Missing file : $file1!", "compare_directories"); }
if ( ! -f $file2 ) { installer::exiter::exit_program("ERROR: Missing file : $file2!", "compare_directories"); }
@@ -1143,7 +1141,7 @@ sub compare_directories
$infoline = "Comparing files: $file1 ($size1) and $file2 ($size2)\n";
$installer::logger::Lang->print($infoline);
-
+
if ( $size1 != $size2 )
{
installer::exiter::exit_program("ERROR: File defect after copy (different size) $file1 ($size1 bytes) and $file2 ($size2 bytes)!", "compare_directories");
@@ -1165,21 +1163,21 @@ sub sign_install_set
my $complete_success = 1;
my $success = 1;
-
+
my $infoline = "Signing installation set in $installsetpath\n";
$installer::logger::Lang->print($infoline);
# check required files.
if ( ! $installer::globals::signfiles_checked ) { check_system_path(); }
-
- # get cerficate information
+
+ # get certificate information
my $pw = get_pw($installer::globals::pwfile);
# making a copy of the installation set, if required
if ( $make_copy ) { $installsetpath = copy_install_set($installsetpath); }
else { $installsetpath = rename_install_set($installsetpath); }
-
- # collecting all files in the installation set
+
+ # collecting all files in the installation set
my ($allcabfiles, $allfiles, $msidatabase, $contains_external_cabfiles, $contains_msidatabase, $sourcefiles) = analyze_installset_content($installsetpath);
if ( $make_copy ) { compare_directories($installsetpath, $followmeinfohash->{'finalinstalldir'}, $sourcefiles); }
@@ -1202,7 +1200,7 @@ sub sign_install_set
# exclude media table from msi database and get all diskids.
my ( $cabfilehash, $filenamehash, $lastsequencehash ) = collect_diskid_from_media_table($msidatabase, $followmeinfohash->{'languagestring'});
- # Check, if there are internal cab files
+ # Check, if there are internal cab files
my ( $contains_internal_cabfiles, $all_internal_cab_files) = check_for_internal_cabfiles($cabfilehash);
if ( $contains_internal_cabfiles )
@@ -1243,12 +1241,12 @@ sub sign_install_set
# finally all other files can be signed
$success = sign_files($followmeinfohash, $allfiles, $pw, 0, 0, 0, $temppath);
if ( ! $success ) { $complete_success = 0; }
-
+
# and changing back
chdir($from);
installer::logger::include_header_into_logfile("End: Signing installation set $installsetpath");
-
+
return ($installsetpath);
}