You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-dev@xerces.apache.org by Thomas Woerner <th...@linux.de> on 2002/09/15 20:33:59 UTC
Xerces 2.1.0 RPM for linux
Hello,
I have built a RPM of Xerces 2.1.0 for linux and have attached the patch
for the Makefile.in's, which extends the install path with DESTDIR, and
the spec file.
It works fine for Red Hat 7.3, 8.0b and should also work on other
distributions, which are using RPM.
Ciao
Thomas Woerner
Re: Xerces 2.1.0 RPM for linux
Posted by PeiYong PY Zhang <pe...@ca.ibm.com>.
Thomas,
Could you please write something on "Build on linux using rpm" which
will be part of the "Build Instruction"? thanks.
Rgds,
PeiYong
----- Original Message -----
From: "Thomas Woerner" <th...@linux.de>
To: <xe...@xml.apache.org>
Cc: "PeiYong PY Zhang" <pe...@ca.ibm.com>
Sent: Tuesday, September 24, 2002 1:08 PM
Subject: Re: Xerces 2.1.0 RPM for linux
>
> PeiYong,
>
>
> here is the spec file without the patch lines.
>
> Thanks for checking in.
>
>
> Regards
> Thomas
>
> On Wed, 18 Sep 2002, PeiYong PY Zhang wrote:
>
> > Thomas,
> >
> > Would you send me the new spec file (after the deletion of the two
> > patch lines u mentioned),
> > and I'd check it into cvs later, thanks.
> >
> > Rgds,
> > PeiYong
> >
> > ----- Original Message -----
> > From: "Thomas Woerner" <th...@linux.de>
> > To: "PeiYong PY Zhang" <pe...@ca.ibm.com>
> > Cc: <xe...@xml.apache.org>
> > Sent: Tuesday, September 17, 2002 4:02 PM
> > Subject: Re: Xerces 2.1.0 RPM for linux
> >
> >
> > >
> > > Hello PeiYong,
> > >
> > >
> > > you have to apply the makefile patch before you can integrate the spec
> > > file into xerces (cvs). After you have applied the patch, remove the
two
> > > patch lines from the spec file and rename it to xerces-c.spec.
> > >
> > > You can place the spec file everywhere in the xerces tree. I would
place
> > > it in the xerces source or root directory.
> > >
> > > Then you can build the binary RPM's for linux with
> > > rpm[build] -tb xerces-c-srcX_X_X.tar.gz
> > >
> > >
> > > Ciao
> > > Thomas
> > >
> > >
> > > On Tue, 17 Sep 2002, PeiYong PY Zhang wrote:
> > >
> > > > Thomas,
> > > >
> > > > Do we need to put the *.spec in the cvs ? and where if it is,
> > > > thanks.
> > > >
> > > > Rgds,
> > > > PeiYong
> > > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> > > For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> > For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
> >
>
>
----------------------------------------------------------------------------
----
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
Re: Xerces 2.1.0 RPM for linux
Posted by Thomas Woerner <th...@linux.de>.
PeiYong,
here is the spec file without the patch lines.
Thanks for checking in.
Regards
Thomas
On Wed, 18 Sep 2002, PeiYong PY Zhang wrote:
> Thomas,
>
> Would you send me the new spec file (after the deletion of the two
> patch lines u mentioned),
> and I'd check it into cvs later, thanks.
>
> Rgds,
> PeiYong
>
> ----- Original Message -----
> From: "Thomas Woerner" <th...@linux.de>
> To: "PeiYong PY Zhang" <pe...@ca.ibm.com>
> Cc: <xe...@xml.apache.org>
> Sent: Tuesday, September 17, 2002 4:02 PM
> Subject: Re: Xerces 2.1.0 RPM for linux
>
>
> >
> > Hello PeiYong,
> >
> >
> > you have to apply the makefile patch before you can integrate the spec
> > file into xerces (cvs). After you have applied the patch, remove the two
> > patch lines from the spec file and rename it to xerces-c.spec.
> >
> > You can place the spec file everywhere in the xerces tree. I would place
> > it in the xerces source or root directory.
> >
> > Then you can build the binary RPM's for linux with
> > rpm[build] -tb xerces-c-srcX_X_X.tar.gz
> >
> >
> > Ciao
> > Thomas
> >
> >
> > On Tue, 17 Sep 2002, PeiYong PY Zhang wrote:
> >
> > > Thomas,
> > >
> > > Do we need to put the *.spec in the cvs ? and where if it is,
> > > thanks.
> > >
> > > Rgds,
> > > PeiYong
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> > For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
>
Re: Xerces 2.1.0 RPM for linux
Posted by PeiYong PY Zhang <pe...@ca.ibm.com>.
Thomas,
Would you send me the new spec file (after the deletion of the two
patch lines u mentioned),
and I'd check it into cvs later, thanks.
Rgds,
PeiYong
----- Original Message -----
From: "Thomas Woerner" <th...@linux.de>
To: "PeiYong PY Zhang" <pe...@ca.ibm.com>
Cc: <xe...@xml.apache.org>
Sent: Tuesday, September 17, 2002 4:02 PM
Subject: Re: Xerces 2.1.0 RPM for linux
>
> Hello PeiYong,
>
>
> you have to apply the makefile patch before you can integrate the spec
> file into xerces (cvs). After you have applied the patch, remove the two
> patch lines from the spec file and rename it to xerces-c.spec.
>
> You can place the spec file everywhere in the xerces tree. I would place
> it in the xerces source or root directory.
>
> Then you can build the binary RPM's for linux with
> rpm[build] -tb xerces-c-srcX_X_X.tar.gz
>
>
> Ciao
> Thomas
>
>
> On Tue, 17 Sep 2002, PeiYong PY Zhang wrote:
>
> > Thomas,
> >
> > Do we need to put the *.spec in the cvs ? and where if it is,
> > thanks.
> >
> > Rgds,
> > PeiYong
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
Re: Xerces 2.1.0 RPM for linux
Posted by Thomas Woerner <th...@linux.de>.
Hello PeiYong,
you have to apply the makefile patch before you can integrate the spec
file into xerces (cvs). After you have applied the patch, remove the two
patch lines from the spec file and rename it to xerces-c.spec.
You can place the spec file everywhere in the xerces tree. I would place
it in the xerces source or root directory.
Then you can build the binary RPM's for linux with
rpm[build] -tb xerces-c-srcX_X_X.tar.gz
Ciao
Thomas
On Tue, 17 Sep 2002, PeiYong PY Zhang wrote:
> Thomas,
>
> Do we need to put the *.spec in the cvs ? and where if it is,
> thanks.
>
> Rgds,
> PeiYong
>
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
Re: Xerces 2.1.0 RPM for linux
Posted by PeiYong PY Zhang <pe...@ca.ibm.com>.
Thomas,
Do we need to put the *.spec in the cvs ? and where if it is,
thanks.
Rgds,
PeiYong
----- Original Message -----
From: "Thomas Woerner" <th...@linux.de>
To: <xe...@xml.apache.org>
Sent: Sunday, September 15, 2002 2:33 PM
Subject: Xerces 2.1.0 RPM for linux
>
> Hello,
>
>
> I have built a RPM of Xerces 2.1.0 for linux and have attached the patch
> for the Makefile.in's, which extends the install path with DESTDIR, and
> the spec file.
>
> It works fine for Red Hat 7.3, 8.0b and should also work on other
> distributions, which are using RPM.
>
>
> Ciao
> Thomas Woerner
>
----------------------------------------------------------------------------
----
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
> For additional commands, e-mail: xerces-c-dev-help@xml.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: xerces-c-dev-unsubscribe@xml.apache.org
For additional commands, e-mail: xerces-c-dev-help@xml.apache.org