You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@pulsar.apache.org by "315157973 (via GitHub)" <gi...@apache.org> on 2023/03/14 12:48:55 UTC
[GitHub] [pulsar] 315157973 opened a new issue, #19806: PIP-XYZ: Assign topic partitions to bundles by round robin
315157973 opened a new issue, #19806:
URL: https://github.com/apache/pulsar/issues/19806
### Motivation
With all existing Pulsar load balancing algorithms, it is difficult to balance the load of Pulsar cluster nodes. It often happens that some nodes are highly loaded while others are idle, and the CPU of each Broker node is very different.
There are three reasons why the existing way will make the cluster unbalanced:
1. The load managed by each Bundle is not even. Even if the number of partitions managed by each bundle is the same, there is no guarantee that the sum of the loads of these partitions will be the same.
2. Doesn't shed loads very well. The existing default policy ThresholdShedder has a relatively high usage threshold, and various traffic thresholds need to be set. Many clusters with high TPS and small message bodies may have high CPU but low traffic; And for many small-scale clusters, the threshold needs to be modified according to the actual business.
3. The removed Bundle cannot be well distributed to other Brokers. The load information of each Broker will be reported at regular intervals, so the judgment of the Leader Broker when allocating Bundles cannot be guaranteed to be completely correct. Secondly, if there are a large number of Bundles to be redistributed, the Leader may make the low-load Broker a new high-load node when the load information is not up-to-date.
### Goal
We reimplemented the algorithm in 3 parts and listed our test report at the end:
1. Assigning partitions to Bundle.
2. Allocating Bundle to Broker.
3. The algorithm for the leader to decide which Bundles on the high-load Broker to offload.
In this PIP, we only discuss the first one: `Assigning partitions to Bundle`.
Let each bundle carry the same load as possible.
### API Changes
1. Add a configuration item `partitionAssignerClassName`, so that different partition assignment algorithms can be dynamically configured.
The existing algorithm will be used as the default `partitionAssignerClassName=ConsistentHashingPartitionAssigner`
3. Implement a new partition assignment class `RoundRobinPartitionAssigner`
### Implementation
The client sends a message to a multi-partition Topic, which uses polling by default.
Therefore, we believe that the load of partitions of the same topic is balanced.
We assign partitions of the same topic to bundle by round-robin.
In this way, the difference in the number of partitions carried by the bundle will not exceed 1.
Since we consider the load of each partition of the same topic to be balanced, the load carried by each bundle is also balanced.
<img src="https://user-images.githubusercontent.com/9758905/224997861-9bb9e1ef-1439-4f67-a3f7-53d9b6e1e5da.png" width="500" height="500">
Operation steps:
1. Partition 0 finds a starting bundle through the consistent hash algorithm, assuming it is bundle0, we start from this bundle
2. By round-robin, assign partition 1 to the next bundle1, assign partition 2 to the next bundle2, and so on
If the number of partitions is less than the number of bundles, will some bundles have a high load?
Since the starting bundle is determined by consistent hashing, the starting point of each topic is different, which can prevent the earlier bundles from becoming hotspots.
When the number of bundles changes, will all partitions be reassigned?
Only when the number of bundles change, all partitions under the same namespace will be reassigned.
Changing the number of broker or partitions, will not trigger reassignment.
We usually only split when there is a hot bundle.
The current partition assign method makes the load of each bundle approximately balanced, so the bundle split will not be triggered unless it is artificially split.
Of course, we have also tested the time-consuming of assigning all partitions in the entire namespace in the worst case.
Test scenario: 6 * 4C32GB Brokers, the CPU water level of each broker is at 60%, and 50,000 partitions under the namespace are assigned at the same time. It takes about 30s.
### Security Considerations
None
### Alternatives
_No response_
### Anything else?
Test report
We tested several scenarios, each using the three algorithms we mentioned above.
And every node looks well balanced.
Machine: 4C32G * 6
Test scenario: 200 partitions, after the cluster is stable, restart one of them
Test scenario: Restart multiple nodes in a loop, and observe the final cluster load
Test scenario: Add a new Broker
<img width="757" alt="QQ20230314-204213@2x" src="https://user-images.githubusercontent.com/9758905/225004459-25f282da-38ef-4af2-be00-b55616d8a57c.png">
Test scenario: single-partition topic, even unloading the bundle will make the receiving broker to be a new hotspot, observe whether the algorithm will unload frequently
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] github-actions[bot] commented on issue #19806: PIP-255: Make the partition assignment strategy pluggable
Posted by "github-actions[bot] (via GitHub)" <gi...@apache.org>.
github-actions[bot] commented on issue #19806:
URL: https://github.com/apache/pulsar/issues/19806#issuecomment-1583832502
The issue had no activity for 30 days, mark with Stale label.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org