[16/70] [partial] Adding documents from 4.2

[ke...@apache.org]

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/aws-ec2-supported-commands.pot
----------------------------------------------------------------------
diff --git a/pot/aws-ec2-supported-commands.pot b/pot/aws-ec2-supported-commands.pot
new file mode 100644
index 0000000..9ffd9f4
--- /dev/null
+++ b/pot/aws-ec2-supported-commands.pot
@@ -0,0 +1,665 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Supported AWS API Calls"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The following Amazon EC2 commands are supported by &PRODUCT; when the AWS API compatible interface is enabled. For a few commands, there are differences between the &PRODUCT; and Amazon EC2 versions, and these differences are noted. The underlying SOAP call for each command is also given, for those who have built tools using those calls."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Elastic IP API mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "EC2 command"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "SOAP call"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "&PRODUCT; API call"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-allocate-address"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "AllocateAddress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "associateIpAddress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-associate-address"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "AssociateAddress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "enableStaticNat"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-addresses"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeAddresses"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listPublicIpAddresses"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-diassociate-address"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DisassociateAddress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "disableStaticNat"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-release-address"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ReleaseAddress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "disassociateIpAddress"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Availability Zone API mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-availability-zones"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeAvailabilityZones"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listZones"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Images API mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-create-image"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "CreateImage"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "createTemplate"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-deregister"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DeregisterImage"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DeleteTemplate"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-images"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeImages"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listTemplates"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-register"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "RegisterImage"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "registerTemplate"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Image Attributes API mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-image-attribute"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeImageAttribute"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listTemplatePermissions"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-modify-image-attribute"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ModifyImageAttribute"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "updateTemplatePermissions"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-reset-image-attribute"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ResetImageAttribute"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Instances API mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-instances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeInstances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listVirtualMachines"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-run-instances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "RunInstances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "deployVirtualMachine"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-reboot-instances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "RebootInstances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "rebootVirtualMachine"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-start-instances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "StartInstances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "startVirtualMachine"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-stop-instances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "StopInstances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "stopVirtualMachine"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-terminate-instances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "TerminateInstances"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "destroyVirtualMachine"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Instance Attributes Mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-instance-attribute"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeInstanceAttribute"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Keys Pairs Mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-add-keypair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "CreateKeyPair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "createSSHKeyPair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-delete-keypair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DeleteKeyPair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "deleteSSHKeyPair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-keypairs"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeKeyPairs"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listSSHKeyPairs"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-import-keypair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ImportKeyPair"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "registerSSHKeyPair"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Passwords API Mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-get-password"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "GetPasswordData"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "getVMPassword"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Security Groups API Mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-authorize"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "AuthorizeSecurityGroupIngress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "authorizeSecurityGroupIngress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-add-group"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "CreateSecurityGroup"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "createSecurityGroup"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-delete-group"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DeleteSecurityGroup"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "deleteSecurityGroup"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-group"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeSecurityGroups"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listSecurityGroups"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-revoke"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "RevokeSecurityGroupIngress"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "revokeSecurityGroupIngress"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Snapshots API Mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-create-snapshot"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "CreateSnapshot"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "createSnapshot"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-delete-snapshot"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DeleteSnapshot"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "deleteSnapshot"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-snapshots"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeSnapshots"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listSnapshots"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Volumes API Mapping"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-attach-volume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "AttachVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "attachVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-create-volume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "CreateVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "createVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-delete-volume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DeleteVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "deleteVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-describe-volume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DescribeVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "listVolumes"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "ec2-detach-volume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "DetachVolume"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "detachVolume"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/aws-ec2-timeouts.pot
----------------------------------------------------------------------
diff --git a/pot/aws-ec2-timeouts.pot b/pot/aws-ec2-timeouts.pot
new file mode 100644
index 0000000..190ad8d
--- /dev/null
+++ b/pot/aws-ec2-timeouts.pot
@@ -0,0 +1,80 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Using Timeouts to Ensure AWS API Command Completion"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Amazon EC2 command-line tools have a default connection timeout. When used with &PRODUCT;, a longer timeout might be needed for some commands. If you find that commands are not completing due to timeouts, you can specify a custom timeouts. You can add the following optional command-line parameters to any &PRODUCT;-supported EC2 command:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "--connection-timeout <replaceable>TIMEOUT</replaceable>"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "Specifies a connection timeout (in seconds). Example:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "--connection-timeout 30"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "--request-timeout <replaceable>TIMEOUT</replaceable>"
+msgstr ""
+
+#. Tag: entry
+#, no-c-format
+msgid "Specifies a request timeout (in seconds). Example:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "--request-timeout 45"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Example:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "ec2-run-instances 2 –z us-test1 –n 1-3 --connection-timeout 120 --request-timeout 120"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The timeouts optional arguments are not specific to &PRODUCT;."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/aws-ec2-user-setup.pot
----------------------------------------------------------------------
diff --git a/pot/aws-ec2-user-setup.pot b/pot/aws-ec2-user-setup.pot
new file mode 100644
index 0000000..c141292
--- /dev/null
+++ b/pot/aws-ec2-user-setup.pot
@@ -0,0 +1,141 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "AWS API User Setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In general, users need not be aware that they are using a translation service provided by &PRODUCT;. They only need to send AWS API calls to &PRODUCT;'s endpoint, and it will translate the calls to the native &PRODUCT; API. Users of the Amazon EC2 compatible interface will be able to keep their existing EC2 tools and scripts and use them with their &PRODUCT; deployment, by specifying the endpoint of the management server and using the proper user credentials. In order to do this, each user must perform the following configuration steps:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Generate user credentials."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Register with the service."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For convenience, set up environment variables for the EC2 SOAP command-line tools."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "AWS API User Registration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Each user must perform a one-time registration. The user follows these steps:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Obtain the following by looking in the &PRODUCT; UI, using the API, or asking the cloud administrator:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The &PRODUCT; server's publicly available DNS name or IP address"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The user account's Access key and Secret key"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Generate a private key and a self-signed X.509 certificate. The user substitutes their own desired storage location for /path/to/… below."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /path/to/private_key.pem -out /path/to/cert.pem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Register the user X.509 certificate and Access/Secret keys with the AWS compatible service. If you have the source code of &PRODUCT; go to the awsapi-setup/setup directory and use the Python script cloudstack-aws-api-register. If you do not have the source then download the script using the following command."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "wget -O cloudstack-aws-api-register <ulink url=\"https://git-wip-us.apache.org/repos/asf?p=incubator-cloudstack.git;a=blob_plain;f=awsapi-setup/setup/cloudstack-aws-api-register;hb=HEAD\">\"https://git-wip-us.apache.org/repos/asf?p=incubator-cloudstack.git;a=blob_plain;f=awsapi-setup/setup/cloudstack-aws-api-register;hb=HEAD\"</ulink>\n"
+"              "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Then execute it, using the parameter values that were obtained in step 1. An example is shown below."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "$ cloudstack-aws-api-register --apikey=<replaceable>User’s &PRODUCT; API key</replaceable> --secretkey=<replaceable>User’s &PRODUCT; Secret key</replaceable> --cert=<replaceable>/path/to/cert.pem</replaceable> --url=http://<replaceable>&PRODUCT;.server</replaceable>:7080/awsapi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A user with an existing AWS certificate could choose to use the same certificate with &PRODUCT;, but note that the certificate would be uploaded to the &PRODUCT; management server database."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "AWS API Command-Line Tools Setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To use the EC2 command-line tools, the user must perform these steps:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure you have the right version of EC2 Tools. The supported version is available at <ulink url=\"http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip\">http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Set up the EC2 environment variables. This can be done every time you use the service or you can set them up in the proper shell profile. Replace the endpoint (i.e EC2_URL) with the proper address of your &PRODUCT; management server and port. In a bash shell do the following."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "\n"
+"                  $ export EC2_CERT=/path/to/cert.pem\n"
+"                  $ export EC2_PRIVATE_KEY=/path/to/private_key.pem\n"
+"                  $ export EC2_URL=http://localhost:7080/awsapi\n"
+"                  $ export EC2_HOME=/path/to/EC2_tools_directory\n"
+"              "
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/aws-interface-compatibility.pot
----------------------------------------------------------------------
diff --git a/pot/aws-interface-compatibility.pot b/pot/aws-interface-compatibility.pot
new file mode 100644
index 0000000..8ed02a8
--- /dev/null
+++ b/pot/aws-interface-compatibility.pot
@@ -0,0 +1,30 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amazon Web Services Compatible Interface"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/basic-adv-networking.pot
----------------------------------------------------------------------
diff --git a/pot/basic-adv-networking.pot b/pot/basic-adv-networking.pot
new file mode 100644
index 0000000..2e67f2c
--- /dev/null
+++ b/pot/basic-adv-networking.pot
@@ -0,0 +1,195 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Basic and Advanced Networking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; provides two styles of networking:."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Basic"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For AWS-style networking. Provides a single network where guest isolation can be provided through layer-3 means such as security groups (IP address source filtering)."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Advanced"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks, but requires more configuration steps than basic networking."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Each zone has either basic or advanced networking. Once the choice of networking model for a zone has been made and configured in &PRODUCT;, it can not be changed. A zone is either basic or advanced for its entire lifetime."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The following table compares the networking features in the two networking models."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Networking Feature"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Basic Network"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Advanced Network"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Number of networks"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Single network"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Multiple networks"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Firewall type"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Physical"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Physical and Virtual"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Load balancer"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Isolation type"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Layer 3"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Layer 2 and Layer 3"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VPN support"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Port forwarding"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "1:1 NAT"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Source NAT"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Userdata"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Network usage monitoring"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "sFlow / netFlow at physical router"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Hypervisor and Virtual Router"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "DNS and DHCP"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The two types of networking may be in use in the same cloud. However, a given zone must use either Basic Networking or Advanced Networking."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Different types of network traffic can be segmented on the same physical network. Guest traffic can also be segmented by account. To isolate traffic, you can use separate VLANs. If you are using separate VLANs on a single physical network, make sure the VLAN tags are in separate numerical ranges."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/basic-zone-configuration.pot
----------------------------------------------------------------------
diff --git a/pot/basic-zone-configuration.pot b/pot/basic-zone-configuration.pot
new file mode 100644
index 0000000..ee76cf4
--- /dev/null
+++ b/pot/basic-zone-configuration.pot
@@ -0,0 +1,360 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Basic Zone Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After you select Basic in the Add Zone wizard and click Next, you will be asked to enter the following details. Then click Next."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Name.</emphasis> A name for the zone."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">DNS 1 and 2.</emphasis> These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Internal DNS 1 and Internal DNS 2.</emphasis> These are DNS servers for use by system VMs in the zone (these are VMs used by &PRODUCT; itself, such as virtual routers, console proxies, and Secondary Storage VMs.) These DNS servers will be accessed via the management traffic network interface of the System VMs. The private IP address you provide for the pods must have a route to the internal DNS server named here."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Hypervisor.</emphasis> (Introduced in version 3.0.1) Choose the hypervisor for the first cluster in the zone. You can add clusters with different hypervisors later, after you finish adding the zone."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Network Offering.</emphasis> Your choice here determines what network services will be available on the network for guest VMs."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Network Offering"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "DefaultSharedNetworkOfferingWithSGService"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you want to enable security groups for guest traffic isolation, choose this. (See Using Security Groups to Control Traffic to VMs.)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "DefaultSharedNetworkOffering"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you do not need security groups, choose this."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "DefaultSharedNetscalerEIPandELBNetworkOffering"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you have installed a Citrix NetScaler appliance as part of your zone network, and you will be using its Elastic IP and Elastic Load Balancing features, choose this. With the EIP and ELB features, a basic zone with security groups enabled can offer 1:1 static NAT and load balancing."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Network Domain.</emphasis> (Optional) If you want to assign a special domain name to the guest VM network, specify the DNS suffix."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Public.</emphasis> A public zone is available to all users. A zone that is not public will be assigned to a particular domain. Only users in that domain will be allowed to create guest VMs in this zone."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Choose which traffic types will be carried by the physical network."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The traffic types are management, public, guest, and storage traffic. For more information about the types, roll over the icons to display their tool tips, or see Basic Zone Network Traffic Types. This screen starts out with some traffic types already assigned. To add more, drag and drop traffic types onto the network. You can also change the network name if desired."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(Introduced in version 3.0.1) Assign a network traffic label to each traffic type on the physical network. These labels must match the labels you have already defined on the hypervisor host. To assign each label, click the Edit button under the traffic type icon. A popup dialog appears where you can type the label, then click OK."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "These traffic labels will be defined only for the hypervisor selected for the first cluster. For all other hypervisors, the labels can be configured after the zone is created."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click Next."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(NetScaler only) If you chose the network offering for NetScaler, you have an additional screen to fill out. Provide the requested details to set up the NetScaler, then click Next."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">IP address.</emphasis> The NSIP (NetScaler IP) address of the NetScaler device."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Username/Password.</emphasis> The authentication credentials to access the device. &PRODUCT; uses these credentials to access the device."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Type.</emphasis> NetScaler device type that is being added. It could be NetScaler VPX, NetScaler MPX, or NetScaler SDX. For a comparison of the types, see About Using a NetScaler Load Balancer."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Public interface.</emphasis> Interface of NetScaler that is configured to be part of the public network."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Private interface.</emphasis> Interface of NetScaler that is configured to be part of the private network."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Number of retries.</emphasis> Number of times to attempt a command on the device before considering the operation failed. Default is 2."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Capacity.</emphasis> Number of guest networks/accounts that will share this NetScaler device."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Dedicated.</emphasis> When marked as dedicated, this device will be dedicated to a single account. When Dedicated is checked, the value in the Capacity field has no significance – implicitly, its value is 1."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(NetScaler only) Configure the IP range for public traffic. The IPs in this range will be used for the static NAT capability which you enabled by selecting the network offering for NetScaler with EIP and ELB. Enter the following details, then click Add. If desired, you can repeat this step to add more IP ranges. When done, click Next."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Gateway.</emphasis> The gateway in use for these IP addresses."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Netmask.</emphasis> The netmask associated with this IP range."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">VLAN.</emphasis> The VLAN that will be used for public traffic."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Start IP/End IP.</emphasis> A range of IP addresses that are assumed to be accessible from the Internet and will be allocated for access to guest VMs."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a new zone, &PRODUCT; adds the first pod for you. You can always add more pods later. For an overview of what a pod is, see <xref linkend=\"about-pods\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To configure the first pod, enter the following, then click Next:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Pod Name.</emphasis> A name for the pod."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Reserved system gateway.</emphasis> The gateway for the hosts in that pod."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Reserved system netmask.</emphasis> The network prefix that defines the pod's subnet. Use CIDR notation."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Start/End Reserved System IP.</emphasis> The IP range in the management network that &PRODUCT; uses to manage various system VMs, such as Secondary Storage VMs, Console Proxy VMs, and DHCP. For more information, see System Reserved IP Addresses."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Configure the network for guest traffic. Provide the following, then click Next:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Guest gateway.</emphasis> The gateway that the guests should use."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Guest netmask.</emphasis> The netmask in use on the subnet the guests will use."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Guest start IP/End IP.</emphasis> Enter the first and last IP addresses that define a range that &PRODUCT; can assign to guests."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "We strongly recommend the use of multiple NICs. If multiple NICs are used, they may be in a different subnet."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If one NIC is used, these IPs should be in the same CIDR as the pod CIDR."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a new pod, &PRODUCT; adds the first cluster for you. You can always add more clusters later. For an overview of what a cluster is, see About Clusters."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To configure the first cluster, enter the following, then click Next:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Hypervisor.</emphasis> (Version 3.0.0 only; in 3.0.1, this field is read only) Choose the type of hypervisor software that all hosts in this cluster will run. If you choose VMware, additional fields appear so you can give information about a vSphere cluster. For vSphere servers, we recommend creating the cluster of hosts in vCenter and then adding the entire cluster to &PRODUCT;. See Add Cluster: vSphere."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Cluster name.</emphasis> Enter a name for the cluster. This can be text of your choosing and is not used by &PRODUCT;."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a new cluster, &PRODUCT; adds the first host for you. You can always add more hosts later. For an overview of what a host is, see About Hosts."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When you add a hypervisor host to &PRODUCT;, the host must not have any VMs already running."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before you can configure the host, you need to install the hypervisor software on the host. You will need to know which version of the hypervisor software version is supported by &PRODUCT; and what additional configuration is required to ensure the host will work with &PRODUCT;. To find these installation details, see:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Citrix XenServer Installation and Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VMware vSphere Installation and Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "KVM vSphere Installation and Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To configure the first host, enter the following, then click Next:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Host Name.</emphasis> The DNS name or IP address of the host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Username.</emphasis> The username is root."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Password.</emphasis> This is the password for the user named above (from your XenServer or KVM install)."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Host Tags.</emphasis> (Optional) Any labels that you use to categorize hosts for ease of maintenance. For example, you can set this to the cloud's HA tag (set in the ha.tag global configuration parameter) if you want this host to be used only for VMs with the \"high availability\" feature enabled. For more information, see HA-Enabled Virtual Machines as well as HA for Hosts."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a new cluster, &PRODUCT; adds the first primary storage server for you. You can always add more servers later. For an overview of what primary storage is, see About Primary Storage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To configure the first primary storage server, enter the following, then click Next:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Name.</emphasis> The name of the storage device."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Protocol.</emphasis> For XenServer, choose either NFS, iSCSI, or PreSetup. For KVM, choose NFS, SharedMountPoint,CLVM, or RBD. For vSphere choose either VMFS (iSCSI or FiberChannel) or NFS. The remaining fields in the screen vary depending on what you choose here."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/basic-zone-guest-ip-addresses.pot
----------------------------------------------------------------------
diff --git a/pot/basic-zone-guest-ip-addresses.pot b/pot/basic-zone-guest-ip-addresses.pot
new file mode 100644
index 0000000..c656eb5
--- /dev/null
+++ b/pot/basic-zone-guest-ip-addresses.pot
@@ -0,0 +1,35 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Basic Zone Guest IP Addresses"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When basic networking is used, &PRODUCT; will assign IP addresses in the CIDR of the pod to the guests in that pod. The administrator must add a Direct IP range on the pod for this purpose. These IPs are in the same VLAN as the hosts."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/basic-zone-network-traffic-types.pot
----------------------------------------------------------------------
diff --git a/pot/basic-zone-network-traffic-types.pot b/pot/basic-zone-network-traffic-types.pot
new file mode 100644
index 0000000..dab50e9
--- /dev/null
+++ b/pot/basic-zone-network-traffic-types.pot
@@ -0,0 +1,65 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Basic Zone Network Traffic Types"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When basic networking is used, there can be only one physical network in the zone. That physical network carries the following traffic types:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Guest. When end users run VMs, they generate guest traffic. The guest VMs communicate with each other over a network that can be referred to as the guest network. Each pod in a basic zone is a broadcast domain, and therefore each pod has a different IP range for the guest network. The administrator must configure the IP range for each pod."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Management. When &PRODUCT;’s internal resources communicate with each other, they generate management traffic. This includes communication between hosts, system VMs (VMs used by &PRODUCT; to perform various tasks in the cloud), and any other component that communicates directly with the &PRODUCT; Management Server. You must configure the IP range for the system VMs to use."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "We strongly recommend the use of separate NICs for management traffic and guest traffic."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public. Public traffic is generated when VMs in the cloud access the Internet. Publicly accessible IPs must be allocated for this purpose. End users can use the &PRODUCT; UI to acquire these IPs to implement NAT between their guest network and the public network, as described in Acquiring a New IP Address."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Storage. Traffic such as VM templates and snapshots, which is sent between the secondary storage VM and secondary storage servers. &PRODUCT; uses a separate Network Interface Controller (NIC) named storage NIC for storage network traffic. Use of a storage NIC that always operates on a high bandwidth network allows fast template and snapshot copying. You must configure the IP range to use for the storage network."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a basic network, configuring the physical network is fairly straightforward. In most cases, you only need to configure one guest network to carry traffic that is generated by guest VMs. If you use a NetScaler load balancer and enable its elastic IP and elastic load balancing (EIP and ELB) features, you must also configure a network to carry public traffic. &PRODUCT; takes care of presenting the necessary network configuration steps to you in the UI when you add a new zone."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/basic-zone-physical-network-configuration.pot
----------------------------------------------------------------------
diff --git a/pot/basic-zone-physical-network-configuration.pot b/pot/basic-zone-physical-network-configuration.pot
new file mode 100644
index 0000000..a9d8152
--- /dev/null
+++ b/pot/basic-zone-physical-network-configuration.pot
@@ -0,0 +1,35 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Basic Zone Physical Network Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a basic network, configuring the physical network is fairly straightforward. You only need to configure one guest network to carry traffic that is generated by guest VMs. When you first add a zone to &PRODUCT;, you set up the guest network through the Add Zone screens."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/best-practices-for-vms.pot
----------------------------------------------------------------------
diff --git a/pot/best-practices-for-vms.pot b/pot/best-practices-for-vms.pot
new file mode 100644
index 0000000..9e8ca11
--- /dev/null
+++ b/pot/best-practices-for-vms.pot
@@ -0,0 +1,35 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Best Practices for Virtual Machines"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The &PRODUCT; administrator should monitor the total number of VM instances in each cluster, and disable allocation to the cluster if the total is approaching the maximum that the hypervisor can handle. Be sure to leave a safety margin to allow for the possibility of one or more hosts failing, which would increase the VM load on the other hosts as the VMs are automatically redeployed. Consult the documentation for your chosen hypervisor to find the maximum permitted number of VMs per host, then use &PRODUCT; global configuration settings to set this as the default limit. Monitor the VM activity in each cluster at all times. Keep the total number of VMs below a safe level that allows for the occasional host failure. For example, if there are N hosts in the cluster, and you want to allow for one host in the cluster to be down at any given time, the total number of VM instances you can permit in the cluster is at most (N-1) * (per-host-limit). Once a cluster reaches this number 
 of VMs, use the &PRODUCT; UI to disable allocation of more VMs to the cluster."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/best-practices-primary-storage.pot
----------------------------------------------------------------------
diff --git a/pot/best-practices-primary-storage.pot b/pot/best-practices-primary-storage.pot
new file mode 100644
index 0000000..6dd7ab2
--- /dev/null
+++ b/pot/best-practices-primary-storage.pot
@@ -0,0 +1,40 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Best Practices for Primary Storage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The speed of primary storage will impact guest performance. If possible, choose smaller, higher RPM drives for primary storage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Ensure that nothing is stored on the server. Adding the server to &PRODUCT; will destroy any existing data"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/best-practices-secondary-storage.pot
----------------------------------------------------------------------
diff --git a/pot/best-practices-secondary-storage.pot b/pot/best-practices-secondary-storage.pot
new file mode 100644
index 0000000..43326cf
--- /dev/null
+++ b/pot/best-practices-secondary-storage.pot
@@ -0,0 +1,45 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Best Practices for Secondary Storage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Each Zone can have one or more secondary storage servers. Multiple secondary storage servers provide increased scalability to the system."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Secondary storage has a high read:write ratio and is expected to consist of larger drives with lower IOPS than primary storage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Ensure that nothing is stored on the server. Adding the server to &PRODUCT; will destroy any existing data."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/best-practices-templates.pot
----------------------------------------------------------------------
diff --git a/pot/best-practices-templates.pot b/pot/best-practices-templates.pot
new file mode 100644
index 0000000..4b82278
--- /dev/null
+++ b/pot/best-practices-templates.pot
@@ -0,0 +1,35 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Best Practices for Templates"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you plan to use large templates (100 GB or larger), be sure you have a 10-gigabit network to support the large templates. A slower network can lead to timeouts and other errors when large templates are used."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/best-practices-virtual-router.pot
----------------------------------------------------------------------
diff --git a/pot/best-practices-virtual-router.pot b/pot/best-practices-virtual-router.pot
new file mode 100644
index 0000000..d1cd63a
--- /dev/null
+++ b/pot/best-practices-virtual-router.pot
@@ -0,0 +1,40 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Best Practices for Virtual Routers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "WARNING: Restarting a virtual router from a hypervisor console deletes all the iptables rules. To work around this issue, stop the virtual router and start it from the &PRODUCT; UI."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "WARNING: Do not use the destroyRouter API when only one router is available in the network, because restartNetwork API with the cleanup=false parameter can't recreate it later. If you want to destroy and recreate the single router available in the network, use the restartNetwork API with the cleanup=true parameter."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/build-deb.pot
----------------------------------------------------------------------
diff --git a/pot/build-deb.pot b/pot/build-deb.pot
new file mode 100644
index 0000000..995b086
--- /dev/null
+++ b/pot/build-deb.pot
@@ -0,0 +1,175 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Building DEB packages"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the bootstrap dependencies, you'll also need to install several other dependencies. Note that we recommend using Maven 3, which is not currently available in 12.04.1 LTS. So, you'll also need to add a PPA repository that includes Maven 3. After running the command <command>add-apt-repository</command>, you will be prompted to continue and a GPG key will be added."
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"<command>$ sudo apt-get update</command>\n"
+"<command>$ sudo apt-get install python-software-properties</command>\n"
+"<command>$ sudo add-apt-repository ppa:natecarlson/maven3</command>\n"
+"<command>$ sudo apt-get update</command>\n"
+"<command>$ sudo apt-get install ant debhelper openjdk-6-jdk tomcat6 libws-commons-util-java genisoimage python-mysqldb libcommons-codec-java libcommons-httpclient-java liblog4j1.2-java maven3</command>\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While we have defined, and you have presumably already installed the bootstrap prerequisites, there are a number of build time prerequisites that need to be resolved. &PRODUCT; uses maven for dependency resolution. You can resolve the buildtime depdencies for CloudStack by running:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "<command>$ mvn3 -P deps</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that we have resolved the dependencies we can move on to building &PRODUCT; and packaging them into DEBs by issuing the following command."
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"<command>$ dpkg-buildpackage -uc -us</command>\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This command will build 16 Debian packages. You should have all of the following:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "\n"
+"cloud-agent_4.0.0-incubating_amd64.deb\n"
+"cloud-agent-deps_4.0.0-incubating_amd64.deb\n"
+"cloud-agent-libs_4.0.0-incubating_amd64.deb\n"
+"cloud-awsapi_4.0.0-incubating_amd64.deb\n"
+"cloud-cli_4.0.0-incubating_amd64.deb\n"
+"cloud-client_4.0.0-incubating_amd64.deb\n"
+"cloud-client-ui_4.0.0-incubating_amd64.deb\n"
+"cloud-core_4.0.0-incubating_amd64.deb\n"
+"cloud-deps_4.0.0-incubating_amd64.deb\n"
+"cloud-python_4.0.0-incubating_amd64.deb\n"
+"cloud-scripts_4.0.0-incubating_amd64.deb\n"
+"cloud-server_4.0.0-incubating_amd64.deb\n"
+"cloud-setup_4.0.0-incubating_amd64.deb\n"
+"cloud-system-iso_4.0.0-incubating_amd64.deb\n"
+"cloud-usage_4.0.0-incubating_amd64.deb\n"
+"cloud-utils_4.0.0-incubating_amd64.deb\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up an APT repo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After you've created the packages, you'll want to copy them to a system where you can serve the packages over HTTP. You'll create a directory for the packages and then use <code>dpkg-scanpackages</code> to create <filename>Packages.gz</filename>, which holds information about the archive structure. Finally, you'll add the repository to your system(s) so you can install the packages using APT."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first step is to make sure that you have the <application>dpkg-dev</application> package installed. This should have been installed when you pulled in the <application>debhelper</application> application previously, but if you're generating <filename>Packages.gz</filename> on a different system, be sure that it's installed there as well."
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "<command>$ sudo apt-get install dpkg-dev</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The next step is to copy the DEBs to the directory where they can be served over HTTP. We'll use <filename>/var/www/cloudstack/repo</filename> in the examples, but change the directory to whatever works for you."
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"<command>sudo mkdir -p /var/www/cloudstack/repo/binary</command>\n"
+"<command>sudo cp *.deb /var/www/cloudstack/repo/binary</command>\n"
+"<command>sudo cd /var/www/cloudstack/repo/binary</command>\n"
+"<command>sudo dpkg-scanpackages . /dev/null | tee Packages | gzip -9 &gt; Packages.gz</command>\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Note: Override Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can safely ignore the warning about a missing override file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now you should have all of the DEB packages and <filename>Packages.gz</filename> in the <filename>binary</filename> directory and available over HTTP. (You may want to use <command>wget</command> or <command>curl</command> to test this before moving on to the next step.)"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring your machines to use the APT repository"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that we have created the repository, you need to configure your machine to make use of the APT repository. You can do this by adding a repository file under <filename>/etc/apt/sources.list.d</filename>. Use your preferred editor to create <filename>/etc/apt/sources.list.d/cloudstack.list</filename> with this line:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "deb http://<replaceable>server.url</replaceable>/cloudstack/repo binary ./"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you have the repository info in place, you'll want to run another update so that APT knows where to find the &PRODUCT; packages."
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "<command>$ sudo apt-get update</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can now move on to the instructions under Install on Ubuntu."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/build-rpm.pot
----------------------------------------------------------------------
diff --git a/pot/build-rpm.pot b/pot/build-rpm.pot
new file mode 100644
index 0000000..a514062
--- /dev/null
+++ b/pot/build-rpm.pot
@@ -0,0 +1,111 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Building RPMs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While we have defined, and you have presumably already installed the bootstrap prerequisites, there are a number of build time prerequisites that need to be resolved. &PRODUCT; uses maven for dependency resolution. You can resolve the buildtime depdencies for CloudStack by running the following command:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "<prompt>$</prompt> <command>mvn</command> -P deps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that we have resolved the dependencies we can move on to building &PRODUCT; and packaging them into RPMs by issuing the following command."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "<prompt>$</prompt> <command>./waf</command> rpm"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Once this completes, you should find assembled RPMs in <filename>artifacts/rpmbuild/RPMS/x86_64</filename>"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Creating a yum repo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While RPMs is an ideal packaging format - it's most easily consumed from yum repositories over a network. We'll move into the directory with the newly created RPMs by issuing the following command:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "<prompt>$</prompt> <command>cd</command> artifacts/rpmbuild/RPMS/x86_64"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Next we'll issue a command to create the repository metadata by issuing the following command:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "<prompt>$</prompt> <command>createrepo</command> ./"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The files and directories within our current working directory can now be uploaded to a web server and serve as a yum repository"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring your systems to use your new yum repository"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that your yum repository is populated with RPMs and metadata we need to configure our machines that need to install CloudStack. We will create a file at <filename>/etc/yum.repos.d/cloudstack.repo</filename> with the following content:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "\n"
+"[apache-cloudstack]\n"
+"name=Apache CloudStack\n"
+"baseurl=http://<replaceable>webserver.tld/path/to/repo</replaceable>\n"
+"enabled=1\n"
+"gpgcheck=0\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Completing this step will allow you to easily install CloudStack on a number of machines across the network."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/building-devcloud.pot
----------------------------------------------------------------------
diff --git a/pot/building-devcloud.pot b/pot/building-devcloud.pot
new file mode 100644
index 0000000..ef4d814
--- /dev/null
+++ b/pot/building-devcloud.pot
@@ -0,0 +1,50 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Building DevCloud"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The DevCloud appliance can be downloaded from the wiki at <ulink url=\"https://cwiki.apache.org/confluence/display/CLOUDSTACK/DevCloud\" />. It can also be built from scratch. Code is being developed to provide this alternative build. It is based on <emphasis>veewee</emphasis>, <emphasis>Vagrant</emphasis> and <emphasis>Puppet</emphasis>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The goal is to automate the DevCloud build and make this automation capability available to all within the source release of &PRODUCT;"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is under heavy development. The code is located in the source tree under <emphasis>tools/devcloud</emphasis>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A preliminary wiki page describes the build at <ulink url=\"https://cwiki.apache.org/CLOUDSTACK/building-devcloud.html\">https://cwiki.pache.org/CLOUDSTACK/building-devcloud.html</ulink>"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/building-marvin.pot
----------------------------------------------------------------------
diff --git a/pot/building-marvin.pot b/pot/building-marvin.pot
new file mode 100644
index 0000000..500d792
--- /dev/null
+++ b/pot/building-marvin.pot
@@ -0,0 +1,91 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Building and Installing Marvin"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Marvin is built with Maven and is dependent on APIdoc. To build it do the following in the root tree of &PRODUCT;:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "mvn -P developer -l :cloud-apidoc"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "mvn -P developer -l :cloud-marvin"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If successfull the build will have created the cloudstackAPI Python package under tools/marvin/marvin/cloudstackAPI as well as a gziped Marvin package under tools/marvin dist. To install the Python Marvin module do the following in tools/marvin:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "sudo python ./setup.py install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The dependencies will be downloaded the Python module installed and you should be able to use Marvin in Python. Check that you can import the module before starting to use it."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "$ python\n"
+"Python 2.7.3 (default, Nov 17 2012, 19:54:34) \n"
+"[GCC 4.2.1 Compatible Apple Clang 4.1 ((tags/Apple/clang-421.11.66))] on darwin\n"
+"Type \"help\", \"copyright\", \"credits\" or \"license\" for more information.\n"
+"&gt;&gt;&gt; import marvin\n"
+"&gt;&gt;&gt; from marvin.cloudstackAPI import *\n"
+"&gt;&gt;&gt; "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You could also install it using <emphasis>pip</emphasis> or <emphasis>easy_install</emphasis> using the local distribution package in tools/marvin/dist :"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "pip install tools/marvin/dist/Marvin-0.1.0.tar.gz"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Or:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "easy_install tools/marvin/dist/Marvin-0.1.0.tar.gz"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/building-prerequisites.pot
----------------------------------------------------------------------
diff --git a/pot/building-prerequisites.pot b/pot/building-prerequisites.pot
new file mode 100644
index 0000000..8758528
--- /dev/null
+++ b/pot/building-prerequisites.pot
@@ -0,0 +1,116 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Build Procedure Prerequisites"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In this section we will assume that you are using the Ubuntu Linux distribution with the Advanced Packaging Tool (APT). If you are using a different distribution or OS and a different packaging tool, adapt the following instructions to your environment. To build &PRODUCT; you will need:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "git, <ulink url=\"http://git-scm.com\">http://git-scm.com</ulink>"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "sudo apt-get install git-core"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "maven, <ulink url=\"http://maven.apache.org\">http://maven.apache.org</ulink>"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "sudo apt-get install maven"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Make sure that you installed maven 3"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "$ mvn --version\n"
+"Apache Maven 3.0.4\n"
+"Maven home: /usr/share/maven\n"
+"Java version: 1.6.0_24, vendor: Sun Microsystems Inc.\n"
+"Java home: /usr/lib/jvm/java-6-openjdk-amd64/jre\n"
+"Default locale: en_US, platform encoding: UTF-8\n"
+"OS name: \"linux\", version: \"3.2.0-33-generic\", arch: \"amd64\", family: \"unix\""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "java"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "set the JAVA_HOME environment variable"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "$ export JAVA_HOME=/usr/lib/jvm/java-6-openjdk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition, to deploy and run &PRODUCT; in a development environment you will need:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Mysql"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "sudo apt-get install mysql-server-5.5"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Start the mysqld service and create a cloud user with cloud as a password"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Tomcat 6"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "sudo apt-get install tomcat6"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/building-with-maven-deploy.pot
----------------------------------------------------------------------
diff --git a/pot/building-with-maven-deploy.pot b/pot/building-with-maven-deploy.pot
new file mode 100644
index 0000000..5efce88
--- /dev/null
+++ b/pot/building-with-maven-deploy.pot
@@ -0,0 +1,65 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Deployment and Testing Steps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Deploying the &PRODUCT; code that you compiled is a two step process:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you have not configured the database or modified its properties do:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "mvn -P developer -pl developer -Ddeploydb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Then you need to run the &PRODUCT; management server. To attach a debugger to it, do:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "export MAVEN_OPTS=\"-Xmx1024 -Xdebug -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n\""
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "mvn -pl :cloud-client-ui jetty:run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When dealing with the database, remember that you may wipe it entirely and lose any data center configuration that you may have set previously."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/building-with-maven-steps.pot
----------------------------------------------------------------------
diff --git a/pot/building-with-maven-steps.pot b/pot/building-with-maven-steps.pot
new file mode 100644
index 0000000..3e8bdb9
--- /dev/null
+++ b/pot/building-with-maven-steps.pot
@@ -0,0 +1,55 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Building Steps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; uses git for source version control, first make sure you have the source code by pulling it:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "git clone https://git-wip-us.apache.org/repos/asf/incubator-cloudstack.git"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Several Project Object Models (POM) are defined to deal with the various build targets of &PRODUCT;. Certain features require some packages that are not compatible with the Apache license and therefore need to be downloaded on your own. Check the wiki for additional information <ulink url=\"https://cwiki.apache.org/CLOUDSTACK/building-with-maven.html\">https://cwiki.apache.org/CLOUDSTACK/building-with-maven.html</ulink>. In order to build all the open source targets of &PRODUCT; do:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "mvn clean install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The resulting jar files will be in the target directory of the subdirectory of the compiled module."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/cloudstack-docs/blob/b23872a5/pot/building-with-maven.pot
----------------------------------------------------------------------
diff --git a/pot/building-with-maven.pot b/pot/building-with-maven.pot
new file mode 100644
index 0000000..aaa0a27
--- /dev/null
+++ b/pot/building-with-maven.pot
@@ -0,0 +1,30 @@
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:11:57\n"
+"PO-Revision-Date: 2013-02-02T20:11:57\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Using Maven to Build &PRODUCT;"
+msgstr ""
+