You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@synapse.apache.org by "Wright, Peter" <Pe...@six-group.com> on 2012/06/15 14:01:23 UTC
Synapse: JMS MapMessage not supported?
Hi,
I need to configure a JMS listener in Apache Synapse that handles JMS MapMessages,
but it seems that Synapse doesn't support this message type.
Synapse issues the following error message when MapMessages are read:
2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis fault processing message
org.apache.axis2.AxisFault: Unable to determine content type for message ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
at org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
at org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
at org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Any advice/help?
Solution/workaround possible?
I have Synapse 2.1.0 installed on Sun Solaris 10,
and a number of IBM MQ jar files copied to ./synapse/lib,
including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
Thanks a lot,
Peter
The content of this e-mail is intended only for the confidential use of the person addressed.
If you are not the intended recipient, please notify the sender and delete this email immediately.
Thank you.
Re: Synapse: JMS MapMessage not supported?
Posted by Rajika Kumarasiri <ra...@gmail.com>.
See https://issues.apache.org/jira/browse/TRANSPORTS-7.
Be warned. I am not sure about the completion of that work.
Rajika
On Mon, Jan 7, 2013 at 12:38 PM, jodeen <jo...@gmail.com> wrote:
>
> Is there any easy way to work around this? (The fact that Synapse doesn't
> support that message type).
>
> Thanks.
>
>
> Wright, Peter wrote:
> >
> > That's what I thought might be the case (suits the issued error messages)
> > :-(
> > Thanks, Peter
> >
> > -----Original Message-----
> > From: Andreas Veithen [mailto:andreas.veithen@gmail.com]
> > Sent: Montag, 18. Juni 2012 18:37
> > To: user@synapse.apache.org
> > Subject: Re: Synapse: JMS MapMessage not supported?
> >
> > As far as I know, support for javax.jms.MapMessage has never been
> > implemented.
> >
> > Andreas
> >
> >
>
> --
> View this message in context:
> http://old.nabble.com/Synapse%3A-JMS-MapMessage-not-supported--tp34018047p34869328.html
> Sent from the Synapse - User mailing list archive at Nabble.com.
>
>
RE: Synapse: JMS MapMessage not supported?
Posted by jodeen <jo...@gmail.com>.
Is there any easy way to work around this? (The fact that Synapse doesn't
support that message type).
Thanks.
Wright, Peter wrote:
>
> That's what I thought might be the case (suits the issued error messages)
> :-(
> Thanks, Peter
>
> -----Original Message-----
> From: Andreas Veithen [mailto:andreas.veithen@gmail.com]
> Sent: Montag, 18. Juni 2012 18:37
> To: user@synapse.apache.org
> Subject: Re: Synapse: JMS MapMessage not supported?
>
> As far as I know, support for javax.jms.MapMessage has never been
> implemented.
>
> Andreas
>
>
--
View this message in context: http://old.nabble.com/Synapse%3A-JMS-MapMessage-not-supported--tp34018047p34869328.html
Sent from the Synapse - User mailing list archive at Nabble.com.
RE: Synapse: JMS MapMessage not supported?
Posted by "Wright, Peter" <Pe...@six-group.com>.
That's what I thought might be the case (suits the issued error messages) :-(
Thanks, Peter
-----Original Message-----
From: Andreas Veithen [mailto:andreas.veithen@gmail.com]
Sent: Montag, 18. Juni 2012 18:37
To: user@synapse.apache.org
Subject: Re: Synapse: JMS MapMessage not supported?
As far as I know, support for javax.jms.MapMessage has never been implemented.
Andreas
On Mon, Jun 18, 2012 at 5:15 PM, Wright, Peter
<Pe...@six-group.com> wrote:
> Hi Ratha,
>
> Thanks for the feedback.
> I tried it as you suggested, but unfortunately still get the
> same error message as in my original post :-(
>
> 2012-06-18 17:14:47,977 [-] [jms-Worker-1] WARN JMSUtils Can't determine size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
> 2012-06-18 17:14:47,995 [-] [jms-Worker-1] ERROR BaseUtils Unsupported JMS message type com.ibm.jms.JMSMapMessage
> 2012-06-18 17:14:47,997 [-] [jms-Worker-1] ERROR JMSMessageReceiver Unknown error processing message
> org.apache.axis2.transport.base.BaseTransportException: Unsupported JMS message type com.ibm.jms.JMSMapMessage
> at org.apache.axis2.transport.base.BaseUtils.handleException(BaseUtils.java:166)
> at org.apache.axis2.transport.jms.JMSUtils.setSOAPEnvelope(JMSUtils.java:174)
> at org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:190)
> at org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
> at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
> at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
> at org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
> at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:662)
>
> I found an old (2008) reference to Synapse not supporting
> the JMSMapMessage type. Is it now supported?
> http://old.nabble.com/JMS-MapMessage-Support-td17288464.html
> Or could it be because it's an IBM MQ JMS message type
> (com.ibm.jms.JMSMapMessage)?
>
> Best regards,
> Peter
>
> -----Original Message-----
> From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
> Sent: Montag, 18. Juni 2012 16:48
> To: user@synapse.apache.org
> Subject: Re: Synapse: JMS MapMessage not supported?
>
> Hi,
> Define like this and check..The issue you faced earlier is, i think because
> of the null rule set...
>
> <parameter name="transport.jms.ContentType">
> <rules>
> <jmsProperty>contentType</jmsProperty>
> <default>text/xml</default>
> </rules>
> </parameter>
>
> Thanks
> -Ratha
> On 18 June 2012 19:37, Wright, Peter <Pe...@six-group.com> wrote:
>
>> Hi Ratha,
>>
>> I defined the content-type as you advised
>> (not sure if correct, did the same as in sample 250,
>> see "JMS_XML_Proxy" in the config below),
>> but still get the same error messages about
>> "unsupported message type com.ibm.jms.JMSMapMessage".
>>
>> Any ideas?
>>
>> Thanks
>> Peter
>>
>> <definitions xmlns="http://ws.apache.org/ns/synapse">
>> <sequence name="fault">
>> <makefault>
>> <code xmlns:tns="http://www.w3.org/2003/05/soap-envelope"
>> value="tns:Receiver"/>
>> <reason value="Mediation failed."/>
>> </makefault>
>> <send/>
>> </sequence>
>> <sequence xmlns="http://ws.apache.org/ns/synapse" name="main"
>> onError="fault">
>> <in>
>> <log level="full"/>
>> <send/>
>> </in>
>> <out>
>> <send/>
>> </out>
>> </sequence>
>> <sequence name="xml_proxy">
>> <log level="full"/>
>> <send/>
>> </sequence>
>> <sequence name="out">
>> <send/>
>> </sequence>
>> <proxy name="JMS_XML_Proxy" transports="jms">
>> <target inSequence="xml_proxy" outSequence="out"/>
>> <parameter name="transport.jms.ContentType">
>> <rules>
>> <jmsProperty>contentType</jmsProperty>
>> <default>com.ibm.jms.JMSMapMessage</default>
>> </rules>
>> </parameter>
>> </proxy>
>> </definitions>
>>
>> =============================================================
>>
>> -----Original Message-----
>> From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
>> Sent: Freitag, 15. Juni 2012 19:48
>> To: user@synapse.apache.org
>> Subject: Re: Synapse: JMS MapMessage not supported?
>>
>> Did you define the "content-type" rule @ your proxy configuration..Try to
>> define it as "default" and check..
>> Thanks
>> -ratha
>>
>> On 15 June 2012 17:31, Wright, Peter <Pe...@six-group.com> wrote:
>>
>> > Hi,
>> >
>> > I need to configure a JMS listener in Apache Synapse that handles JMS
>> > MapMessages,
>> > but it seems that Synapse doesn't support this message type.
>> >
>> > Synapse issues the following error message when MapMessages are read:
>> >
>> > 2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine
>> > size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
>> >
>> > 2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis
>> > fault processing message
>> > org.apache.axis2.AxisFault: Unable to determine content type for message
>> > ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
>> > at
>> >
>> org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
>> > at
>> >
>> org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
>> > at
>> >
>> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
>> > at
>> >
>> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
>> > at
>> >
>> org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
>> > at
>> >
>> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
>> > at
>> >
>> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
>> > at java.lang.Thread.run(Thread.java:662)
>> >
>> > Any advice/help?
>> > Solution/workaround possible?
>> >
>> > I have Synapse 2.1.0 installed on Sun Solaris 10,
>> > and a number of IBM MQ jar files copied to ./synapse/lib,
>> > including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
>> >
>> > Thanks a lot,
>> > Peter
>> >
>> > The content of this e-mail is intended only for the confidential use of
>> > the person addressed.
>> > If you are not the intended recipient, please notify the sender and
>> delete
>> > this email immediately.
>> > Thank you.
>> >
>> The content of this e-mail is intended only for the confidential use of
>> the person addressed.
>> If you are not the intended recipient, please notify the sender and delete
>> this email immediately.
>> Thank you.
>>
> The content of this e-mail is intended only for the confidential use of the person addressed.
> If you are not the intended recipient, please notify the sender and delete this email immediately.
> Thank you.
The content of this e-mail is intended only for the confidential use of the person addressed.
If you are not the intended recipient, please notify the sender and delete this email immediately.
Thank you.
Re: Synapse: JMS MapMessage not supported?
Posted by Andreas Veithen <an...@gmail.com>.
As far as I know, support for javax.jms.MapMessage has never been implemented.
Andreas
On Mon, Jun 18, 2012 at 5:15 PM, Wright, Peter
<Pe...@six-group.com> wrote:
> Hi Ratha,
>
> Thanks for the feedback.
> I tried it as you suggested, but unfortunately still get the
> same error message as in my original post :-(
>
> 2012-06-18 17:14:47,977 [-] [jms-Worker-1] WARN JMSUtils Can't determine size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
> 2012-06-18 17:14:47,995 [-] [jms-Worker-1] ERROR BaseUtils Unsupported JMS message type com.ibm.jms.JMSMapMessage
> 2012-06-18 17:14:47,997 [-] [jms-Worker-1] ERROR JMSMessageReceiver Unknown error processing message
> org.apache.axis2.transport.base.BaseTransportException: Unsupported JMS message type com.ibm.jms.JMSMapMessage
> at org.apache.axis2.transport.base.BaseUtils.handleException(BaseUtils.java:166)
> at org.apache.axis2.transport.jms.JMSUtils.setSOAPEnvelope(JMSUtils.java:174)
> at org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:190)
> at org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
> at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
> at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
> at org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
> at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:662)
>
> I found an old (2008) reference to Synapse not supporting
> the JMSMapMessage type. Is it now supported?
> http://old.nabble.com/JMS-MapMessage-Support-td17288464.html
> Or could it be because it's an IBM MQ JMS message type
> (com.ibm.jms.JMSMapMessage)?
>
> Best regards,
> Peter
>
> -----Original Message-----
> From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
> Sent: Montag, 18. Juni 2012 16:48
> To: user@synapse.apache.org
> Subject: Re: Synapse: JMS MapMessage not supported?
>
> Hi,
> Define like this and check..The issue you faced earlier is, i think because
> of the null rule set...
>
> <parameter name="transport.jms.ContentType">
> <rules>
> <jmsProperty>contentType</jmsProperty>
> <default>text/xml</default>
> </rules>
> </parameter>
>
> Thanks
> -Ratha
> On 18 June 2012 19:37, Wright, Peter <Pe...@six-group.com> wrote:
>
>> Hi Ratha,
>>
>> I defined the content-type as you advised
>> (not sure if correct, did the same as in sample 250,
>> see "JMS_XML_Proxy" in the config below),
>> but still get the same error messages about
>> "unsupported message type com.ibm.jms.JMSMapMessage".
>>
>> Any ideas?
>>
>> Thanks
>> Peter
>>
>> <definitions xmlns="http://ws.apache.org/ns/synapse">
>> <sequence name="fault">
>> <makefault>
>> <code xmlns:tns="http://www.w3.org/2003/05/soap-envelope"
>> value="tns:Receiver"/>
>> <reason value="Mediation failed."/>
>> </makefault>
>> <send/>
>> </sequence>
>> <sequence xmlns="http://ws.apache.org/ns/synapse" name="main"
>> onError="fault">
>> <in>
>> <log level="full"/>
>> <send/>
>> </in>
>> <out>
>> <send/>
>> </out>
>> </sequence>
>> <sequence name="xml_proxy">
>> <log level="full"/>
>> <send/>
>> </sequence>
>> <sequence name="out">
>> <send/>
>> </sequence>
>> <proxy name="JMS_XML_Proxy" transports="jms">
>> <target inSequence="xml_proxy" outSequence="out"/>
>> <parameter name="transport.jms.ContentType">
>> <rules>
>> <jmsProperty>contentType</jmsProperty>
>> <default>com.ibm.jms.JMSMapMessage</default>
>> </rules>
>> </parameter>
>> </proxy>
>> </definitions>
>>
>> =============================================================
>>
>> -----Original Message-----
>> From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
>> Sent: Freitag, 15. Juni 2012 19:48
>> To: user@synapse.apache.org
>> Subject: Re: Synapse: JMS MapMessage not supported?
>>
>> Did you define the "content-type" rule @ your proxy configuration..Try to
>> define it as "default" and check..
>> Thanks
>> -ratha
>>
>> On 15 June 2012 17:31, Wright, Peter <Pe...@six-group.com> wrote:
>>
>> > Hi,
>> >
>> > I need to configure a JMS listener in Apache Synapse that handles JMS
>> > MapMessages,
>> > but it seems that Synapse doesn't support this message type.
>> >
>> > Synapse issues the following error message when MapMessages are read:
>> >
>> > 2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine
>> > size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
>> >
>> > 2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis
>> > fault processing message
>> > org.apache.axis2.AxisFault: Unable to determine content type for message
>> > ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
>> > at
>> >
>> org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
>> > at
>> >
>> org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
>> > at
>> >
>> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
>> > at
>> >
>> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
>> > at
>> >
>> org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
>> > at
>> >
>> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
>> > at
>> >
>> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
>> > at java.lang.Thread.run(Thread.java:662)
>> >
>> > Any advice/help?
>> > Solution/workaround possible?
>> >
>> > I have Synapse 2.1.0 installed on Sun Solaris 10,
>> > and a number of IBM MQ jar files copied to ./synapse/lib,
>> > including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
>> >
>> > Thanks a lot,
>> > Peter
>> >
>> > The content of this e-mail is intended only for the confidential use of
>> > the person addressed.
>> > If you are not the intended recipient, please notify the sender and
>> delete
>> > this email immediately.
>> > Thank you.
>> >
>> The content of this e-mail is intended only for the confidential use of
>> the person addressed.
>> If you are not the intended recipient, please notify the sender and delete
>> this email immediately.
>> Thank you.
>>
> The content of this e-mail is intended only for the confidential use of the person addressed.
> If you are not the intended recipient, please notify the sender and delete this email immediately.
> Thank you.
RE: Synapse: JMS MapMessage not supported?
Posted by "Wright, Peter" <Pe...@six-group.com>.
Hi Ratha,
Thanks for the feedback.
I tried it as you suggested, but unfortunately still get the
same error message as in my original post :-(
2012-06-18 17:14:47,977 [-] [jms-Worker-1] WARN JMSUtils Can't determine size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
2012-06-18 17:14:47,995 [-] [jms-Worker-1] ERROR BaseUtils Unsupported JMS message type com.ibm.jms.JMSMapMessage
2012-06-18 17:14:47,997 [-] [jms-Worker-1] ERROR JMSMessageReceiver Unknown error processing message
org.apache.axis2.transport.base.BaseTransportException: Unsupported JMS message type com.ibm.jms.JMSMapMessage
at org.apache.axis2.transport.base.BaseUtils.handleException(BaseUtils.java:166)
at org.apache.axis2.transport.jms.JMSUtils.setSOAPEnvelope(JMSUtils.java:174)
at org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:190)
at org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
at org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
at org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
I found an old (2008) reference to Synapse not supporting
the JMSMapMessage type. Is it now supported?
http://old.nabble.com/JMS-MapMessage-Support-td17288464.html
Or could it be because it's an IBM MQ JMS message type
(com.ibm.jms.JMSMapMessage)?
Best regards,
Peter
-----Original Message-----
From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
Sent: Montag, 18. Juni 2012 16:48
To: user@synapse.apache.org
Subject: Re: Synapse: JMS MapMessage not supported?
Hi,
Define like this and check..The issue you faced earlier is, i think because
of the null rule set...
<parameter name="transport.jms.ContentType">
<rules>
<jmsProperty>contentType</jmsProperty>
<default>text/xml</default>
</rules>
</parameter>
Thanks
-Ratha
On 18 June 2012 19:37, Wright, Peter <Pe...@six-group.com> wrote:
> Hi Ratha,
>
> I defined the content-type as you advised
> (not sure if correct, did the same as in sample 250,
> see "JMS_XML_Proxy" in the config below),
> but still get the same error messages about
> "unsupported message type com.ibm.jms.JMSMapMessage".
>
> Any ideas?
>
> Thanks
> Peter
>
> <definitions xmlns="http://ws.apache.org/ns/synapse">
> <sequence name="fault">
> <makefault>
> <code xmlns:tns="http://www.w3.org/2003/05/soap-envelope"
> value="tns:Receiver"/>
> <reason value="Mediation failed."/>
> </makefault>
> <send/>
> </sequence>
> <sequence xmlns="http://ws.apache.org/ns/synapse" name="main"
> onError="fault">
> <in>
> <log level="full"/>
> <send/>
> </in>
> <out>
> <send/>
> </out>
> </sequence>
> <sequence name="xml_proxy">
> <log level="full"/>
> <send/>
> </sequence>
> <sequence name="out">
> <send/>
> </sequence>
> <proxy name="JMS_XML_Proxy" transports="jms">
> <target inSequence="xml_proxy" outSequence="out"/>
> <parameter name="transport.jms.ContentType">
> <rules>
> <jmsProperty>contentType</jmsProperty>
> <default>com.ibm.jms.JMSMapMessage</default>
> </rules>
> </parameter>
> </proxy>
> </definitions>
>
> =============================================================
>
> -----Original Message-----
> From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
> Sent: Freitag, 15. Juni 2012 19:48
> To: user@synapse.apache.org
> Subject: Re: Synapse: JMS MapMessage not supported?
>
> Did you define the "content-type" rule @ your proxy configuration..Try to
> define it as "default" and check..
> Thanks
> -ratha
>
> On 15 June 2012 17:31, Wright, Peter <Pe...@six-group.com> wrote:
>
> > Hi,
> >
> > I need to configure a JMS listener in Apache Synapse that handles JMS
> > MapMessages,
> > but it seems that Synapse doesn't support this message type.
> >
> > Synapse issues the following error message when MapMessages are read:
> >
> > 2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine
> > size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
> >
> > 2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis
> > fault processing message
> > org.apache.axis2.AxisFault: Unable to determine content type for message
> > ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
> > at
> >
> org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
> > at
> >
> org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
> > at
> >
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
> > at
> >
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
> > at
> >
> org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
> > at
> >
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> > at
> >
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> > at java.lang.Thread.run(Thread.java:662)
> >
> > Any advice/help?
> > Solution/workaround possible?
> >
> > I have Synapse 2.1.0 installed on Sun Solaris 10,
> > and a number of IBM MQ jar files copied to ./synapse/lib,
> > including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
> >
> > Thanks a lot,
> > Peter
> >
> > The content of this e-mail is intended only for the confidential use of
> > the person addressed.
> > If you are not the intended recipient, please notify the sender and
> delete
> > this email immediately.
> > Thank you.
> >
> The content of this e-mail is intended only for the confidential use of
> the person addressed.
> If you are not the intended recipient, please notify the sender and delete
> this email immediately.
> Thank you.
>
The content of this e-mail is intended only for the confidential use of the person addressed.
If you are not the intended recipient, please notify the sender and delete this email immediately.
Thank you.
Re: Synapse: JMS MapMessage not supported?
Posted by vijayaratha vijayasingam <vi...@gmail.com>.
Hi,
Define like this and check..The issue you faced earlier is, i think because
of the null rule set...
<parameter name="transport.jms.ContentType">
<rules>
<jmsProperty>contentType</jmsProperty>
<default>text/xml</default>
</rules>
</parameter>
Thanks
-Ratha
On 18 June 2012 19:37, Wright, Peter <Pe...@six-group.com> wrote:
> Hi Ratha,
>
> I defined the content-type as you advised
> (not sure if correct, did the same as in sample 250,
> see "JMS_XML_Proxy" in the config below),
> but still get the same error messages about
> "unsupported message type com.ibm.jms.JMSMapMessage".
>
> Any ideas?
>
> Thanks
> Peter
>
> <definitions xmlns="http://ws.apache.org/ns/synapse">
> <sequence name="fault">
> <makefault>
> <code xmlns:tns="http://www.w3.org/2003/05/soap-envelope"
> value="tns:Receiver"/>
> <reason value="Mediation failed."/>
> </makefault>
> <send/>
> </sequence>
> <sequence xmlns="http://ws.apache.org/ns/synapse" name="main"
> onError="fault">
> <in>
> <log level="full"/>
> <send/>
> </in>
> <out>
> <send/>
> </out>
> </sequence>
> <sequence name="xml_proxy">
> <log level="full"/>
> <send/>
> </sequence>
> <sequence name="out">
> <send/>
> </sequence>
> <proxy name="JMS_XML_Proxy" transports="jms">
> <target inSequence="xml_proxy" outSequence="out"/>
> <parameter name="transport.jms.ContentType">
> <rules>
> <jmsProperty>contentType</jmsProperty>
> <default>com.ibm.jms.JMSMapMessage</default>
> </rules>
> </parameter>
> </proxy>
> </definitions>
>
> =============================================================
>
> -----Original Message-----
> From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
> Sent: Freitag, 15. Juni 2012 19:48
> To: user@synapse.apache.org
> Subject: Re: Synapse: JMS MapMessage not supported?
>
> Did you define the "content-type" rule @ your proxy configuration..Try to
> define it as "default" and check..
> Thanks
> -ratha
>
> On 15 June 2012 17:31, Wright, Peter <Pe...@six-group.com> wrote:
>
> > Hi,
> >
> > I need to configure a JMS listener in Apache Synapse that handles JMS
> > MapMessages,
> > but it seems that Synapse doesn't support this message type.
> >
> > Synapse issues the following error message when MapMessages are read:
> >
> > 2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine
> > size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
> >
> > 2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis
> > fault processing message
> > org.apache.axis2.AxisFault: Unable to determine content type for message
> > ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
> > at
> >
> org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
> > at
> >
> org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
> > at
> >
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
> > at
> >
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
> > at
> >
> org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
> > at
> >
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> > at
> >
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> > at java.lang.Thread.run(Thread.java:662)
> >
> > Any advice/help?
> > Solution/workaround possible?
> >
> > I have Synapse 2.1.0 installed on Sun Solaris 10,
> > and a number of IBM MQ jar files copied to ./synapse/lib,
> > including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
> >
> > Thanks a lot,
> > Peter
> >
> > The content of this e-mail is intended only for the confidential use of
> > the person addressed.
> > If you are not the intended recipient, please notify the sender and
> delete
> > this email immediately.
> > Thank you.
> >
> The content of this e-mail is intended only for the confidential use of
> the person addressed.
> If you are not the intended recipient, please notify the sender and delete
> this email immediately.
> Thank you.
>
RE: Synapse: JMS MapMessage not supported?
Posted by "Wright, Peter" <Pe...@six-group.com>.
Hi Ratha,
I defined the content-type as you advised
(not sure if correct, did the same as in sample 250,
see "JMS_XML_Proxy" in the config below),
but still get the same error messages about
"unsupported message type com.ibm.jms.JMSMapMessage".
Any ideas?
Thanks
Peter
<definitions xmlns="http://ws.apache.org/ns/synapse">
<sequence name="fault">
<makefault>
<code xmlns:tns="http://www.w3.org/2003/05/soap-envelope" value="tns:Receiver"/>
<reason value="Mediation failed."/>
</makefault>
<send/>
</sequence>
<sequence xmlns="http://ws.apache.org/ns/synapse" name="main" onError="fault">
<in>
<log level="full"/>
<send/>
</in>
<out>
<send/>
</out>
</sequence>
<sequence name="xml_proxy">
<log level="full"/>
<send/>
</sequence>
<sequence name="out">
<send/>
</sequence>
<proxy name="JMS_XML_Proxy" transports="jms">
<target inSequence="xml_proxy" outSequence="out"/>
<parameter name="transport.jms.ContentType">
<rules>
<jmsProperty>contentType</jmsProperty>
<default>com.ibm.jms.JMSMapMessage</default>
</rules>
</parameter>
</proxy>
</definitions>
=============================================================
-----Original Message-----
From: vijayaratha vijayasingam [mailto:vijayaratha@gmail.com]
Sent: Freitag, 15. Juni 2012 19:48
To: user@synapse.apache.org
Subject: Re: Synapse: JMS MapMessage not supported?
Did you define the "content-type" rule @ your proxy configuration..Try to
define it as "default" and check..
Thanks
-ratha
On 15 June 2012 17:31, Wright, Peter <Pe...@six-group.com> wrote:
> Hi,
>
> I need to configure a JMS listener in Apache Synapse that handles JMS
> MapMessages,
> but it seems that Synapse doesn't support this message type.
>
> Synapse issues the following error message when MapMessages are read:
>
> 2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine
> size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
>
> 2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis
> fault processing message
> org.apache.axis2.AxisFault: Unable to determine content type for message
> ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
> at
> org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
> at
> org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
> at
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
> at
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
> at
> org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:662)
>
> Any advice/help?
> Solution/workaround possible?
>
> I have Synapse 2.1.0 installed on Sun Solaris 10,
> and a number of IBM MQ jar files copied to ./synapse/lib,
> including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
>
> Thanks a lot,
> Peter
>
> The content of this e-mail is intended only for the confidential use of
> the person addressed.
> If you are not the intended recipient, please notify the sender and delete
> this email immediately.
> Thank you.
>
The content of this e-mail is intended only for the confidential use of the person addressed.
If you are not the intended recipient, please notify the sender and delete this email immediately.
Thank you.
Re: Synapse: JMS MapMessage not supported?
Posted by vijayaratha vijayasingam <vi...@gmail.com>.
Did you define the "content-type" rule @ your proxy configuration..Try to
define it as "default" and check..
Thanks
-ratha
On 15 June 2012 17:31, Wright, Peter <Pe...@six-group.com> wrote:
> Hi,
>
> I need to configure a JMS listener in Apache Synapse that handles JMS
> MapMessages,
> but it seems that Synapse doesn't support this message type.
>
> Synapse issues the following error message when MapMessages are read:
>
> 2012-06-15 13:09:04,614 [-] [jms-Worker-1] WARN JMSUtils Can't determine
> size of JMS message; unsupported message type : com.ibm.jms.JMSMapMessage
>
> 2012-06-15 13:09:04,630 [-] [jms-Worker-1] ERROR JMSMessageReceiver Axis
> fault processing message
> org.apache.axis2.AxisFault: Unable to determine content type for message
> ID:414d5120534544312e45552e4445562e4fd5cce6200bc09d
> at
> org.apache.axis2.transport.jms.JMSMessageReceiver.processThoughEngine(JMSMessageReceiver.java:167)
> at
> org.apache.axis2.transport.jms.JMSMessageReceiver.onMessage(JMSMessageReceiver.java:122)
> at
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.handleMessage(ServiceTaskManager.java:518)
> at
> org.apache.axis2.transport.jms.ServiceTaskManager$MessageListenerTask.run(ServiceTaskManager.java:430)
> at
> org.apache.axis2.transport.base.threads.NativeWorkerPool$1.run(NativeWorkerPool.java:58)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
> at java.lang.Thread.run(Thread.java:662)
>
> Any advice/help?
> Solution/workaround possible?
>
> I have Synapse 2.1.0 installed on Sun Solaris 10,
> and a number of IBM MQ jar files copied to ./synapse/lib,
> including com.ibm.mqjms.jar that contains "com.ibm.jms.JMSMapMessage".
>
> Thanks a lot,
> Peter
>
> The content of this e-mail is intended only for the confidential use of
> the person addressed.
> If you are not the intended recipient, please notify the sender and delete
> this email immediately.
> Thank you.
>