You are viewing a plain text version of this content. The canonical link for it is here.

Posted to user@openmeetings.apache.org by 小野圭二 <on...@gmail.com> on 2013/12/02 07:21:28 UTC

Re: How to enter home by auto login

I have a question about the authentication.
I am appreciate if anyone clear to me.

The question is Why need admin role in setUserOpbjectMainLandingZone() ?
I found the 'if sentence' in the function and it checked user role
certainly.
As a trial, i commented out the procedure and run, but this time
secureLoginByRemote() in remote.MainServeice.java breaked in on.
I searched secureLoginBy..() where it was called, but it did not call in
any openmeetings package file.

Why need admin role in REST function? Dose it require from red5?

Best.

-Ono


2013/11/29 小野圭二 <on...@gmail.com>

> I am checking REST API for auto login.
> And their logic found out.
>    each api -> SOAPLoginDao.addSOAPLogin -> SoapLogin ->
> javax.EntityManager
> Then could you point to me where is the normal login java program?
> I guess it corresponding "xmlcrm.loginUser" in checkLoginData.lzx.
>
>
>
> 2013/11/29 小野圭二 <on...@gmail.com>
>
>> Ah, under axis. Thanks.:-)
>>
>>
>> 2013/11/29 Maxim Solodovnik <so...@gmail.com>
>>
>>>
>>> https://svn.apache.org/viewvc/openmeetings/branches/2.x/src/org/apache/openmeetings/axis/services/UserWebService.java?revision=1520950&view=markup
>>> line 974
>>>
>>>
>>> On Fri, Nov 29, 2013 at 9:18 AM, 小野圭二 <on...@gmail.com> wrote:
>>>
>>>> I would like to check setUserObjectMainLandingZone() source code, but
>>>> could not figure it out.
>>>> I am sorry but could you point it's place in the source tree to me?
>>>>
>>>>
>>>> 2013/11/28 小野圭二 <on...@gmail.com>
>>>>
>>>>> Clear, thanks.
>>>>>
>>>>>
>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>
>>>>>> setUserObjectAndGenerateRoomHash creates hash
>>>>>> user is being created as soon as this hash is used to login
>>>>>>
>>>>>>
>>>>>> On Thu, Nov 28, 2013 at 5:09 PM, 小野圭二 <on...@gmail.com> wrote:
>>>>>>
>>>>>>> Yes, setUserObjectAndGenerateRoomHash() do that, right?
>>>>>>>
>>>>>>>
>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>
>>>>>>>> User account should be created as soon as hash will be used
>>>>>>>>
>>>>>>>>
>>>>>>>> On Thu, Nov 28, 2013 at 5:01 PM, 小野圭二 <on...@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Ok, thanks. I will make these to be a cautionary statement.
>>>>>>>>>
>>>>>>>>> BTW, setUserObjectAndGenerateRoomHash() admits admission without a
>>>>>>>>> account in om_user table. Dose it expected behavior?
>>>>>>>>>
>>>>>>>>> -Ono
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>
>>>>>>>>>> Actually
>>>>>>>>>> Jim during auto-login
>>>>>>>>>> and Jim via login/password
>>>>>>>>>>
>>>>>>>>>> are 2 different users :(
>>>>>>>>>> you can play with different drives
>>>>>>>>>>
>>>>>>>>>> I believe one of the is available to the whole room
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, Nov 28, 2013 at 4:45 PM, 小野圭二 <on...@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Ok, no problem. To set external parameter with dummy, a normal
>>>>>>>>>>> user can enter to dashboard.
>>>>>>>>>>> But in the case of the procedure that entering to a room after
>>>>>>>>>>> auto login, there are some issues as following.
>>>>>>>>>>>
>>>>>>>>>>> Steps:
>>>>>>>>>>>   1."Jim"(normal user) enter to a dashboard after auto login  <-
>>>>>>>>>>> works fine
>>>>>>>>>>>   2.upload a file to his home drive     <- fine
>>>>>>>>>>>   3.exit from the room    <-fine
>>>>>>>>>>>   4.logout          <- get error
>>>>>>>>>>>   6.shutdown the browser and enter to it by normal
>>>>>>>>>>> authentication  <-fine
>>>>>>>>>>>   7.enter the last room                      <-fine
>>>>>>>>>>>   8.there is not the upload file in his home drive    <- wow
>>>>>>>>>>>
>>>>>>>>>>> Is there any workaround?
>>>>>>>>>>>
>>>>>>>>>>> -Ono
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>
>>>>>>>>>>>> Unfortunately it is impossible to perform auto-login for
>>>>>>>>>>>> "normal" users.
>>>>>>>>>>>> By implementing auto-login you take care of user authentication
>>>>>>>>>>>> and all users are sort of "external".
>>>>>>>>>>>>  In case you need to separate them you can assign different
>>>>>>>>>>>> "externalUserType" for these 2 groups
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Nov 28, 2013 at 4:16 PM, 小野圭二 <on...@gmail.com>wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Thank you form your reply, Maxim.
>>>>>>>>>>>>> In fact, i have two type user.
>>>>>>>>>>>>>
>>>>>>>>>>>>> 1.One is the external user, and they enter into a room by
>>>>>>>>>>>>> using setUserObjectAndGenerateRoomHash().
>>>>>>>>>>>>> 2.The other is the normal user in OM, and they enter into
>>>>>>>>>>>>> their dashboard by using setUserObjectMainLandingZone().
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have image 1 need "external parameter", but 2 dose not need
>>>>>>>>>>>>> them.
>>>>>>>>>>>>> In my test, setUserObjectAndGenerateRoomHash() need not
>>>>>>>>>>>>> "external parameter", they worked with null.
>>>>>>>>>>>>> If setUserObjectMainLandingZone() need them, what shall i set
>>>>>>>>>>>>> in the case of normal user(mean not external user)?
>>>>>>>>>>>>>
>>>>>>>>>>>>> -Ono
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I believe this is the problem:
>>>>>>>>>>>>>> externalUserId=&externalUserType=<http://localhost:5080/openmeetings/services/UserService/setUserObjectMainLandingZone?SID=e50cd93df12e620d30f6eb66e46110d9&username=onoke&firstname=ono1&lastname=keiji&profilePictureUrl=&email=ono1@mail.jp&externalUserId=&externalUserType=>
>>>>>>>>>>>>>> These 2 parameters are REQUIRED
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "external user id" is the ID unique in your external system
>>>>>>>>>>>>>> for the user you are setting
>>>>>>>>>>>>>> "external user type" is the unique alias of your external
>>>>>>>>>>>>>> system.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> These 2 parameters should identify user you are setting
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Nov 28, 2013 at 2:24 PM, 小野圭二 <on...@gmail.com>wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Ok, i found it was v2.2.0.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> DEBUG 11-28 15:54:04.818 o.a.o.Version:96
>>>>>>>>>>>>>>> [Launcher:/openmeetings] -
>>>>>>>>>>>>>>> ##################################################
>>>>>>>>>>>>>>> #               Openmeetings is up               #
>>>>>>>>>>>>>>> #    2.2.0-SNAPSHOT 1546244 28-November-2013     #
>>>>>>>>>>>>>>> #                and ready to use                #
>>>>>>>>>>>>>>> ##################################################
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> And also figured out the errors, but i have no idea to
>>>>>>>>>>>>>>> resolve it.:<
>>>>>>>>>>>>>>> I used setUserObjectMainLandingZone() for REST to auto login.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ERROR 11-28 16:15:40.148
>>>>>>>>>>>>>>> o.a.o.r.r.ScopeApplicationAdapter:1791 [NioProcessor-10] - [setUsername]
>>>>>>>>>>>>>>> java.lang.NullPointerException: null
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.openmeetings.remote.red5.ScopeApplicationAdapter.setUsernameAndSession(ScopeApplicationAdapter.java:1782)
>>>>>>>>>>>>>>> ~[openmeetings-2.2.0-SNAPSHOT.jar:na]
>>>>>>>>>>>>>>>  at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
>>>>>>>>>>>>>>> Method) ~[na:1.7.0_25]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
>>>>>>>>>>>>>>> ~[na:1.7.0_25]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
>>>>>>>>>>>>>>> ~[na:1.7.0_25]
>>>>>>>>>>>>>>> at java.lang.reflect.Method.invoke(Method.java:606)
>>>>>>>>>>>>>>> ~[na:1.7.0_25]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.red5.server.service.ServiceInvoker.invoke(ServiceInvoker.java:196)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.red5.server.service.ServiceInvoker.invoke(ServiceInvoker.java:115)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.red5.server.net.rtmp.RTMPHandler.invokeCall(RTMPHandler.java:157)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.red5.server.net.rtmp.RTMPHandler.onInvoke(RTMPHandler.java:394)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.red5.server.net.rtmp.BaseRTMPHandler.messageReceived(BaseRTMPHandler.java:130)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.red5.server.net.rtmp.RTMPMinaIoHandler.messageReceived(RTMPMinaIoHandler.java:164)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain$TailFilter.messageReceived(DefaultIoFilterChain.java:716)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.callNextMessageReceived(DefaultIoFilterChain.java:434)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.access$1200(DefaultIoFilterChain.java:46)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain$EntryImpl$1.messageReceived(DefaultIoFilterChain.java:796)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.filter.codec.ProtocolCodecFilter$ProtocolDecoderOutputImpl.flush(ProtocolCodecFilter.java:427)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.filter.codec.ProtocolCodecFilter.messageReceived(ProtocolCodecFilter.java:245)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.callNextMessageReceived(DefaultIoFilterChain.java:434)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.access$1200(DefaultIoFilterChain.java:46)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain$EntryImpl$1.messageReceived(DefaultIoFilterChain.java:796)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.red5.server.net.rtmpe.RTMPEIoFilter.messageReceived(RTMPEIoFilter.java:124)
>>>>>>>>>>>>>>> ~[red5.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.callNextMessageReceived(DefaultIoFilterChain.java:434)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.access$1200(DefaultIoFilterChain.java:46)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain$EntryImpl$1.messageReceived(DefaultIoFilterChain.java:796)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.IoFilterAdapter.messageReceived(IoFilterAdapter.java:119)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.callNextMessageReceived(DefaultIoFilterChain.java:434)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.filterchain.DefaultIoFilterChain.fireMessageReceived(DefaultIoFilterChain.java:426)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.polling.AbstractPollingIoProcessor.read(AbstractPollingIoProcessor.java:715)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.polling.AbstractPollingIoProcessor.process(AbstractPollingIoProcessor.java:668)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.polling.AbstractPollingIoProcessor.process(AbstractPollingIoProcessor.java:657)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.core.polling.AbstractPollingIoProcessor.access$600(AbstractPollingIoProcessor.java:68)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> org.apache.mina.core.polling.AbstractPollingIoProcessor$Processor.run(AbstractPollingIoProcessor.java:1141)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> org.apache.mina.util.NamePreservingRunnable.run(NamePreservingRunnable.java:64)
>>>>>>>>>>>>>>> ~[mina-core-2.0.4.jar:na]
>>>>>>>>>>>>>>>  at
>>>>>>>>>>>>>>> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
>>>>>>>>>>>>>>> ~[na:1.7.0_25]
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
>>>>>>>>>>>>>>> ~[na:1.7.0_25]
>>>>>>>>>>>>>>>  at java.lang.Thread.run(Thread.java:724) ~[na:1.7.0_25]
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> you can check OM log
>>>>>>>>>>>>>>>> The version is in a very beginning.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I suspect there is some error on start.
>>>>>>>>>>>>>>>> could you please check the logs?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Thu, Nov 28, 2013 at 1:45 PM, 小野圭二 <on...@gmail.com>wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I replaced to ver.2.x, and do again auto login, but
>>>>>>>>>>>>>>>>> dashboard did not show.
>>>>>>>>>>>>>>>>> I attache the screen image.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I assume the compiled module version that was branch 2.x.
>>>>>>>>>>>>>>>>> How can i confirm the version?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -Ono
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> yes, complete replace
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Thu, Nov 28, 2013 at 9:22 AM, 小野圭二 <onokeiji@gmail.com
>>>>>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Ok,  it should be whole replace, should not it?
>>>>>>>>>>>>>>>>>>> I am going to have separate one in my server.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thx.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> -Ono
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2013/11/28 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Basic instructions are:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 1*) make backup (if you have valuable info)
>>>>>>>>>>>>>>>>>>>> 2*) drop DB
>>>>>>>>>>>>>>>>>>>> 3) delete OM
>>>>>>>>>>>>>>>>>>>> 4) create DB
>>>>>>>>>>>>>>>>>>>> 5) unzip
>>>>>>>>>>>>>>>>>>>> 6) restore/install
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> *) you can create separate DB for om.2.2 while testing
>>>>>>>>>>>>>>>>>>>> instead of drop
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Thu, Nov 28, 2013 at 9:12 AM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi Maxim,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I compiled the branch 2.x and got them in the dist
>>>>>>>>>>>>>>>>>>>>> path.
>>>>>>>>>>>>>>>>>>>>> Then should i replace whole ver.2.1.1 to the dist one,
>>>>>>>>>>>>>>>>>>>>> or just jar
>>>>>>>>>>>>>>>>>>>>> files(openmeetings-2.2.0-SNAPSHOT.jar,openmeetings-WebService-2.2.0-SNAPSHOT.jar,
>>>>>>>>>>>>>>>>>>>>> openmeetings-templates-2.2.0-SNAPSHOT.jar) and swf file(main.as3.swf11.swf)
>>>>>>>>>>>>>>>>>>>>> run into ver.2.1.1 ?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thx.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> -Ono
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 2013/11/26 小野圭二 <on...@gmail.com>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> My is 2.1.1.
>>>>>>>>>>>>>>>>>>>>>> I am going to version up to 2.2 from source.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> 2013/11/26 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Just have checked using 2.2
>>>>>>>>>>>>>>>>>>>>>>> Works as expected
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Tue, Nov 26, 2013 at 5:20 PM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> thanks
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> 2013/11/26 Maxim Solodovnik <so...@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> will try to check this later today
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Nov 26, 2013 at 5:12 PM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you Maxim.
>>>>>>>>>>>>>>>>>>>>>>>>>> I cannot any items in the dashboard just now.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> >dashboard.show.myrooms
>>>>>>>>>>>>>>>>>>>>>>>>>> >dashboard.show.rssfeed
>>>>>>>>>>>>>>>>>>>>>>>>>> >dashboard.show.chat
>>>>>>>>>>>>>>>>>>>>>>>>>> Those  should be changed in global settings,
>>>>>>>>>>>>>>>>>>>>>>>>>> right?
>>>>>>>>>>>>>>>>>>>>>>>>>> My config is as following.
>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard.show.myrooms ->1
>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard.show.rssfeed   ->0
>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard.show.chat        ->1
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> 2013/11/26 Maxim Solodovnik <solomax666@gmail.com
>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> This feature was originally developed to login
>>>>>>>>>>>>>>>>>>>>>>>>>>> using FB :) (just ignore the message)
>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you see more items on the dashboard while
>>>>>>>>>>>>>>>>>>>>>>>>>>> entering as normal user?
>>>>>>>>>>>>>>>>>>>>>>>>>>> have you changed following (undocumented) config
>>>>>>>>>>>>>>>>>>>>>>>>>>> options:
>>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard.show.myrooms
>>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard.show.rssfeed
>>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard.show.chat
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Nov 26, 2013 at 4:54 PM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ah, step 4 was. :-)
>>>>>>>>>>>>>>>>>>>>>>>>>>>> As sure as could login, but not dashboard.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> It raised a dialog that said 'you entered by
>>>>>>>>>>>>>>>>>>>>>>>>>>>> using Facebook account...,'.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> And there are only menu,"contact and message",
>>>>>>>>>>>>>>>>>>>>>>>>>>>> "user', "logout" and "bug report".
>>>>>>>>>>>>>>>>>>>>>>>>>>>> The other was nothing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I did not use fb account. What this?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2013/11/26 Maxim Solodovnik <
>>>>>>>>>>>>>>>>>>>>>>>>>>>> solomax666@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you basically need step 4 :)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you can enter the dashboard using following URL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://localhost:5080/openmeetings?secureHash=
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *63ec9442133d717fab4339c971e3ba4f*
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> hash in bold is generated by you on step 3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Nov 26, 2013 at 4:37 PM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wow, sorry for missing minus, it seems like i
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> am tired. ;-b
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then i got as following, seems like hash code.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <ns:setUserObjectMainLandingZoneResponse>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <ns:return>63ec9442133d717fab4339c971e3ba4f</ns:return></ns:setUserObjectMainLandingZoneResponse>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The url is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://localhost:5080/openmeetings/services/UserService/setUserObjectMainLandingZone?SID=e50cd93df12e620d30f6eb66e46110d9&username=onoke&firstname=ono1&lastname=keiji&profilePictureUrl=&email=ono1@mail.jp&externalUserId=&externalUserType=
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I expectd to enter into dashboard by the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> above url, but just return xml.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Guaaaa.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -Ono
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2013/11/26 Maxim Solodovnik <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> solomax666@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> According to this table
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.apache.org/ErrorsTable.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -26 ErrorAdmin authorization required
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> on step 2 you need to login as admin/soap
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> on step 3 you need to set all the details of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your "external" user
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> According to the code you can only go to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dashboard using this function (other areas are not accessible)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Nov 26, 2013 at 3:31 PM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Maxim,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your reply, and i shame my
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> blind eyes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But i could not entry to the dashboard
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly by using the api.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> My procedure as following,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.get session by using getSession()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.login by using loginUser()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3.then redirect to the server by using
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> setUserObjectMainLandingZone()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used all for REST.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I got xml strings from 3 as following, it
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> seems works.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <ns:setUserObjectMainLandingZoneResponse>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   <ns:return>-26</ns:return>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> </ns:setUserObjectMainLandingZoneResponse>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Any lack in my procedure?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thx.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -Ono
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2013/11/26 Maxim Solodovnik <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> solomax666@gmail.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Hello Ono,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > I guess you need this method
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.apache.org/UserService.html#setUserObjectMainLandingZone
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > zones are listed here:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.apache.org/GeneralConfiguration.htmlunder
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > "default.landing.zone" key
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > On Tue, Nov 26, 2013 at 7:35 AM, 小野圭二 <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> onokeiji@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> I know how to enter any meeting room
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly by using api, but could
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> not figure out to enter home at first.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> Is there any way to do this?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> Thx
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> -Ono
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > WBR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> WBR
>>>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> WBR
>>>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> WBR
>>>>>>>>>> Maxim aka solomax
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> WBR
>>>>>>>> Maxim aka solomax
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> WBR
>>>>>> Maxim aka solomax
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>>
>