You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@mesos.apache.org by Stephen Boesch <ja...@gmail.com> on 2015/09/04 23:10:54 UTC
Basic installation question
After following the directions here:
http://mesos.apache.org/gettingstarted/
Which for centos7 includes the following:
# Change working directory.
$ cd mesos
# Bootstrap (Only required if building from git repository).
$ ./bootstrap
# Configure and build.
$ mkdir build
$ cd build
$ ../configure
$ make
In order to speed up the build and reduce verbosity of the logs, you can
append-j <number of cores> V=0 to make.
# Run test suite.
$ make check
# Install (Optional).
$ make install
But the installation is not correct afterwards: here is the bin directory:
$ ll bin
total 92
-rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
-rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
-rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
-rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
-rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
-rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
-rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
-rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
-rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
-rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
-rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
-rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
-rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
-rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
-rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
-rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
-rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
-rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
-rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
-rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
-rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
So .. two things:
(a) what is missing from the installation instructions?
(b) Is there an *up to date *rpm/yum installation for centos7?
Re: Basic installation question
Posted by Marco Massenzio <ma...@mesosphere.io>.
argh - sorry!
${MESOS_HOME}/build/bin
(I'd mixed the two around)
*Marco Massenzio*
*Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
On Fri, Sep 4, 2015 at 2:39 PM, Marco Massenzio <ma...@mesosphere.io> wrote:
> I think you are looking into the wrong bin/ folder (the one under
> top-level mesos/) - the actual binaries are in ${MESOS_HOME}/bin/build
>
> I am positive that the instructions work on CentOS 7.1 as I had to run all
> those recently on a VM of mine.
>
> BTW - If you are looking for the libmesos and various includes, they will
> be under /usr/local (you can change that by using something like:
>
> ../configure --prefix /path/to/install/dir
>
>
>
> *Marco Massenzio*
>
> *Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
>
> On Fri, Sep 4, 2015 at 2:10 PM, Stephen Boesch <ja...@gmail.com> wrote:
>
>>
>> After following the directions here:
>> http://mesos.apache.org/gettingstarted/
>>
>> Which for centos7 includes the following:
>>
>>
>>
>>
>> # Change working directory.
>> $ cd mesos
>>
>> # Bootstrap (Only required if building from git repository).
>> $ ./bootstrap
>>
>> # Configure and build.
>> $ mkdir build
>> $ cd build
>> $ ../configure
>> $ make
>>
>> In order to speed up the build and reduce verbosity of the logs, you can
>> append-j <number of cores> V=0 to make.
>>
>> # Run test suite.
>> $ make check
>>
>> # Install (Optional).
>> $ make install
>>
>>
>>
>> But the installation is not correct afterwards: here is the bin directory:
>>
>> $ ll bin
>> total 92
>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>
>> So .. two things:
>>
>> (a) what is missing from the installation instructions?
>>
>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>
>>
>>
>>
>>
>>
>>
>
Re: Basic installation question
Posted by Marco Massenzio <ma...@mesosphere.io>.
I think you are looking into the wrong bin/ folder (the one under top-level
mesos/) - the actual binaries are in ${MESOS_HOME}/bin/build
I am positive that the instructions work on CentOS 7.1 as I had to run all
those recently on a VM of mine.
BTW - If you are looking for the libmesos and various includes, they will
be under /usr/local (you can change that by using something like:
../configure --prefix /path/to/install/dir
*Marco Massenzio*
*Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
On Fri, Sep 4, 2015 at 2:10 PM, Stephen Boesch <ja...@gmail.com> wrote:
>
> After following the directions here:
> http://mesos.apache.org/gettingstarted/
>
> Which for centos7 includes the following:
>
>
>
>
> # Change working directory.
> $ cd mesos
>
> # Bootstrap (Only required if building from git repository).
> $ ./bootstrap
>
> # Configure and build.
> $ mkdir build
> $ cd build
> $ ../configure
> $ make
>
> In order to speed up the build and reduce verbosity of the logs, you can
> append-j <number of cores> V=0 to make.
>
> # Run test suite.
> $ make check
>
> # Install (Optional).
> $ make install
>
>
>
> But the installation is not correct afterwards: here is the bin directory:
>
> $ ll bin
> total 92
> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>
> So .. two things:
>
> (a) what is missing from the installation instructions?
>
> (b) Is there an *up to date *rpm/yum installation for centos7?
>
>
>
>
>
>
>
RE: Basic installation question
Posted by Klaus Ma <kl...@cguru.net>.
Can you share the command line of master & slave? According the following information, it seems master run without "--zk" option.
Regards,----Klaus Ma (马达), PMP® | http://www.cguru.net
CallSend SMSCall from mobileAdd to SkypeYou'll need Skype CreditFree via SkypeCallSend SMSCall from mobileAdd to SkypeYou'll need Skype CreditFree via SkypeDate: Fri, 4 Sep 2015 17:33:45 -0700
Subject: Re: Basic installation question
From: javadba@gmail.com
To: user@mesos.apache.org
I installed using yum -y install mesos. That did work.
Now the master and slaves do not see each other.
Here is the master:
$ ps -ef | grep mesos | grep -v grepstack 30236 17902 0 00:09 pts/4 00:00:04 /mnt/mesos/build/src/.libs/lt-mesos-master --work_dir=/tmp/mesos --ip=10.xx.xx.124
Here is one of the 20 slaves:
ps -ef | grep mesos | grep -v greproot 26086 1 0 00:10 ? 00:00:00 /usr/sbin/mesos-slave --master=zk://10.xx.xx.124:2181/mesos --log_dir=/var/log/mesosroot 26092 26086 0 00:10 ? 00:00:00 logger -p user.info -t mesos-slave[26086]root 26093 26086 0 00:10 ? 00:00:00 logger -p user.err -t mesos-slave[26086]
Note the slave and master are on correct same ip address
The /etc/mesos/zk seems to be set properly : and I do see the /mesos node in zookeeper is updated after restarting the master
However the zookeeper node is empty:
[zk: localhost:2181(CONNECTED) 10] ls /mesos[]
The node is world accessible so no permission issue:
[zk: localhost:2181(CONNECTED) 12] getAcl /mesos
'world,'anyone: cdrwa
Why is the zookeeper node empty? Is this the reason the master and slaves are not connecting?
2015-09-04 14:56 GMT-07:00 craig w <co...@gmail.com>:
No problem, they have a "downloads" link inn their menu: https://mesosphere.com/downloads/
On Sep 4, 2015 5:43 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
@Craig . That is an incomplete answer - given that such links are not presented in an obvious manner . Maybe you managed to find a link on their site that provides prebuilt for Centos7: if so then please share it.
I had previously found a link on their site for prebuilt binaries but is based on using CDH4 (which is not possible for my company). It is also old.
https://docs.mesosphere.com/tutorials/install_centos_rhel/
2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
Mesosphere has packages prebuilt, go to their site to find how to install
On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
After following the directions here: http://mesos.apache.org/gettingstarted/
Which for centos7 includes the following:
# Change working directory.
$ cd mesos
# Bootstrap (Only required if building from git repository).
$ ./bootstrap
# Configure and build.
$ mkdir build
$ cd build
$ ../configure
$ make
In order to speed up the build and reduce verbosity of the logs, you can append-j <number of cores> V=0 to make. # Run test suite.
$ make check
# Install (Optional).
$ make install
But the installation is not correct afterwards: here is the bin directory:
$ ll bintotal 92-rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in-rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in-rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in-rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in-rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in-rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in-rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in-rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in-rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in-rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in-rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in-rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in-rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in-rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in-rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in-rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in-rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in-rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in-rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in-rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in-rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.indrwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
So .. two things:
(a) what is missing from the installation instructions?
(b) Is there an up to date rpm/yum installation for centos7?
Re: Basic installation question
Posted by Marco Massenzio <ma...@mesosphere.io>.
Thanks for follow-up, Stephen - this will be also useful to others finding
this in the archives!
Glad it eventually worked for you, I'll drop a line to our guys to update
the download page with this information, so it should hopefully be less
painful in the future for others.
*Marco Massenzio*
*Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
On Sat, Sep 5, 2015 at 3:00 PM, Stephen Boesch <ja...@gmail.com> wrote:
> Yes I had started the slaves as
>
> service mesos-slave start
>
> But had not done the correct way on the master, which is supposed to be:
>
> service mesos-master start
>
> The slaves do appear after having made that correction: thanks.
>
>
> 2015-09-05 14:55 GMT-07:00 Marco Massenzio <ma...@mesosphere.io>:
>
>> Stephen:
>>
>> Klaus is correct, you are starting the Master in "standalone" mode, not
>> with zookeeper support: it needs adding the --zk=zk://10.xx.xx.124:2181/mesos
>> --quorum=1 options (at the very least).
>>
>> As you correctly noted, the contents of the /mesos znode is empty and
>> thus the agent nodes cannot find elected Master leader (also, if you are
>> running more than one Master, they won't 'know' about each other and won't
>> be able to elect a leader).
>>
>> To check that your settings work, you can (a) look in Master logs (it
>> will log a lot of info when connecting to ZK) and (b) see that under /mesos
>> a number of json.info_0000nn nodes will appear (whose contents are JSON so
>> you can double check that the contents make sense).
>>
>> You can find more info here[0].
>>
>> [0]
>> http://codetrips.com/2015/08/16/apache-mesos-leader-master-discovery-using-zookeeper-part-2/
>>
>> *Marco Massenzio*
>>
>> *Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
>>
>> On Fri, Sep 4, 2015 at 5:33 PM, Stephen Boesch <ja...@gmail.com> wrote:
>>
>>>
>>> I installed using yum -y install mesos. That did work.
>>>
>>> Now the master and slaves do not see each other.
>>>
>>>
>>> Here is the master:
>>> $ ps -ef | grep mesos | grep -v grep
>>> stack 30236 17902 0 00:09 pts/4 00:00:04
>>> /mnt/mesos/build/src/.libs/lt-mesos-master --work_dir=/tmp/mesos
>>> --ip=10.xx.xx.124
>>>
>>>
>>> Here is one of the 20 slaves:
>>>
>>> ps -ef | grep mesos | grep -v grep
>>> root 26086 1 0 00:10 ? 00:00:00 /usr/sbin/mesos-slave
>>> --master=zk://10.xx.xx.124:2181/mesos --log_dir=/var/log/mesos
>>> root 26092 26086 0 00:10 ? 00:00:00 logger -p user.info -t
>>> mesos-slave[26086]
>>> root 26093 26086 0 00:10 ? 00:00:00 logger -p user.err -t
>>> mesos-slave[26086]
>>>
>>>
>>> Note the slave and master are on correct same ip address
>>>
>>> The /etc/mesos/zk seems to be set properly : and I do see the /mesos
>>> node in zookeeper is updated after restarting the master
>>>
>>> However the zookeeper node is empty:
>>>
>>> [zk: localhost:2181(CONNECTED) 10] ls /mesos
>>> []
>>>
>>> The node is world accessible so no permission issue:
>>>
>>> [zk: localhost:2181(CONNECTED) 12] getAcl /mesos
>>> 'world,'anyone
>>> : cdrwa
>>>
>>> Why is the zookeeper node empty? Is this the reason the master and
>>> slaves are not connecting?
>>>
>>> 2015-09-04 14:56 GMT-07:00 craig w <co...@gmail.com>:
>>>
>>>> No problem, they have a "downloads" link inn their menu:
>>>> https://mesosphere.com/downloads/
>>>> On Sep 4, 2015 5:43 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>>
>>>>> @Craig . That is an incomplete answer - given that such links are not
>>>>> presented in an obvious manner . Maybe you managed to find a link on
>>>>> their site that provides prebuilt for Centos7: if so then please share it.
>>>>>
>>>>>
>>>>> I had previously found a link on their site for prebuilt binaries but
>>>>> is based on using CDH4 (which is not possible for my company). It is also
>>>>> old.
>>>>>
>>>>> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>>>>>
>>>>>
>>>>> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>>>>>
>>>>>> Mesosphere has packages prebuilt, go to their site to find how to
>>>>>> install
>>>>>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>>>>
>>>>>>>
>>>>>>> After following the directions here:
>>>>>>> http://mesos.apache.org/gettingstarted/
>>>>>>>
>>>>>>> Which for centos7 includes the following:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> # Change working directory.
>>>>>>> $ cd mesos
>>>>>>>
>>>>>>> # Bootstrap (Only required if building from git repository).
>>>>>>> $ ./bootstrap
>>>>>>>
>>>>>>> # Configure and build.
>>>>>>> $ mkdir build
>>>>>>> $ cd build
>>>>>>> $ ../configure
>>>>>>> $ make
>>>>>>>
>>>>>>> In order to speed up the build and reduce verbosity of the logs, you
>>>>>>> can append-j <number of cores> V=0 to make.
>>>>>>>
>>>>>>> # Run test suite.
>>>>>>> $ make check
>>>>>>>
>>>>>>> # Install (Optional).
>>>>>>> $ make install
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> But the installation is not correct afterwards: here is the bin
>>>>>>> directory:
>>>>>>>
>>>>>>> $ ll bin
>>>>>>> total 92
>>>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>>>> valgrind-mesos-tests.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>>>> valgrind-mesos-slave.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14
>>>>>>> valgrind-mesos-master.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>>>> valgrind-mesos-local.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14
>>>>>>> mesos-master-flags.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>>>>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>>>>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>>>>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>>>>>
>>>>>>> So .. two things:
>>>>>>>
>>>>>>> (a) what is missing from the installation instructions?
>>>>>>>
>>>>>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>
>>
>
Re: Basic installation question
Posted by Stephen Boesch <ja...@gmail.com>.
Yes I had started the slaves as
service mesos-slave start
But had not done the correct way on the master, which is supposed to be:
service mesos-master start
The slaves do appear after having made that correction: thanks.
2015-09-05 14:55 GMT-07:00 Marco Massenzio <ma...@mesosphere.io>:
> Stephen:
>
> Klaus is correct, you are starting the Master in "standalone" mode, not
> with zookeeper support: it needs adding the --zk=zk://10.xx.xx.124:2181/mesos
> --quorum=1 options (at the very least).
>
> As you correctly noted, the contents of the /mesos znode is empty and thus
> the agent nodes cannot find elected Master leader (also, if you are running
> more than one Master, they won't 'know' about each other and won't be able
> to elect a leader).
>
> To check that your settings work, you can (a) look in Master logs (it will
> log a lot of info when connecting to ZK) and (b) see that under /mesos a
> number of json.info_0000nn nodes will appear (whose contents are JSON so
> you can double check that the contents make sense).
>
> You can find more info here[0].
>
> [0]
> http://codetrips.com/2015/08/16/apache-mesos-leader-master-discovery-using-zookeeper-part-2/
>
> *Marco Massenzio*
>
> *Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
>
> On Fri, Sep 4, 2015 at 5:33 PM, Stephen Boesch <ja...@gmail.com> wrote:
>
>>
>> I installed using yum -y install mesos. That did work.
>>
>> Now the master and slaves do not see each other.
>>
>>
>> Here is the master:
>> $ ps -ef | grep mesos | grep -v grep
>> stack 30236 17902 0 00:09 pts/4 00:00:04
>> /mnt/mesos/build/src/.libs/lt-mesos-master --work_dir=/tmp/mesos
>> --ip=10.xx.xx.124
>>
>>
>> Here is one of the 20 slaves:
>>
>> ps -ef | grep mesos | grep -v grep
>> root 26086 1 0 00:10 ? 00:00:00 /usr/sbin/mesos-slave
>> --master=zk://10.xx.xx.124:2181/mesos --log_dir=/var/log/mesos
>> root 26092 26086 0 00:10 ? 00:00:00 logger -p user.info -t
>> mesos-slave[26086]
>> root 26093 26086 0 00:10 ? 00:00:00 logger -p user.err -t
>> mesos-slave[26086]
>>
>>
>> Note the slave and master are on correct same ip address
>>
>> The /etc/mesos/zk seems to be set properly : and I do see the /mesos node
>> in zookeeper is updated after restarting the master
>>
>> However the zookeeper node is empty:
>>
>> [zk: localhost:2181(CONNECTED) 10] ls /mesos
>> []
>>
>> The node is world accessible so no permission issue:
>>
>> [zk: localhost:2181(CONNECTED) 12] getAcl /mesos
>> 'world,'anyone
>> : cdrwa
>>
>> Why is the zookeeper node empty? Is this the reason the master and
>> slaves are not connecting?
>>
>> 2015-09-04 14:56 GMT-07:00 craig w <co...@gmail.com>:
>>
>>> No problem, they have a "downloads" link inn their menu:
>>> https://mesosphere.com/downloads/
>>> On Sep 4, 2015 5:43 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>
>>>> @Craig . That is an incomplete answer - given that such links are not
>>>> presented in an obvious manner . Maybe you managed to find a link on
>>>> their site that provides prebuilt for Centos7: if so then please share it.
>>>>
>>>>
>>>> I had previously found a link on their site for prebuilt binaries but
>>>> is based on using CDH4 (which is not possible for my company). It is also
>>>> old.
>>>>
>>>> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>>>>
>>>>
>>>> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>>>>
>>>>> Mesosphere has packages prebuilt, go to their site to find how to
>>>>> install
>>>>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>>>
>>>>>>
>>>>>> After following the directions here:
>>>>>> http://mesos.apache.org/gettingstarted/
>>>>>>
>>>>>> Which for centos7 includes the following:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> # Change working directory.
>>>>>> $ cd mesos
>>>>>>
>>>>>> # Bootstrap (Only required if building from git repository).
>>>>>> $ ./bootstrap
>>>>>>
>>>>>> # Configure and build.
>>>>>> $ mkdir build
>>>>>> $ cd build
>>>>>> $ ../configure
>>>>>> $ make
>>>>>>
>>>>>> In order to speed up the build and reduce verbosity of the logs, you
>>>>>> can append-j <number of cores> V=0 to make.
>>>>>>
>>>>>> # Run test suite.
>>>>>> $ make check
>>>>>>
>>>>>> # Install (Optional).
>>>>>> $ make install
>>>>>>
>>>>>>
>>>>>>
>>>>>> But the installation is not correct afterwards: here is the bin
>>>>>> directory:
>>>>>>
>>>>>> $ ll bin
>>>>>> total 92
>>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>>> valgrind-mesos-tests.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>>> valgrind-mesos-slave.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14
>>>>>> valgrind-mesos-master.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>>> valgrind-mesos-local.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>>>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>>>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>>>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>>>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>>>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>>>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>>>>
>>>>>> So .. two things:
>>>>>>
>>>>>> (a) what is missing from the installation instructions?
>>>>>>
>>>>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>
>>
>
Re: Basic installation question
Posted by Marco Massenzio <ma...@mesosphere.io>.
Stephen:
Klaus is correct, you are starting the Master in "standalone" mode, not
with zookeeper support: it needs adding the --zk=zk://10.xx.xx.124:2181/mesos
--quorum=1 options (at the very least).
As you correctly noted, the contents of the /mesos znode is empty and thus
the agent nodes cannot find elected Master leader (also, if you are running
more than one Master, they won't 'know' about each other and won't be able
to elect a leader).
To check that your settings work, you can (a) look in Master logs (it will
log a lot of info when connecting to ZK) and (b) see that under /mesos a
number of json.info_0000nn nodes will appear (whose contents are JSON so
you can double check that the contents make sense).
You can find more info here[0].
[0]
http://codetrips.com/2015/08/16/apache-mesos-leader-master-discovery-using-zookeeper-part-2/
*Marco Massenzio*
*Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
On Fri, Sep 4, 2015 at 5:33 PM, Stephen Boesch <ja...@gmail.com> wrote:
>
> I installed using yum -y install mesos. That did work.
>
> Now the master and slaves do not see each other.
>
>
> Here is the master:
> $ ps -ef | grep mesos | grep -v grep
> stack 30236 17902 0 00:09 pts/4 00:00:04
> /mnt/mesos/build/src/.libs/lt-mesos-master --work_dir=/tmp/mesos
> --ip=10.xx.xx.124
>
>
> Here is one of the 20 slaves:
>
> ps -ef | grep mesos | grep -v grep
> root 26086 1 0 00:10 ? 00:00:00 /usr/sbin/mesos-slave
> --master=zk://10.xx.xx.124:2181/mesos --log_dir=/var/log/mesos
> root 26092 26086 0 00:10 ? 00:00:00 logger -p user.info -t
> mesos-slave[26086]
> root 26093 26086 0 00:10 ? 00:00:00 logger -p user.err -t
> mesos-slave[26086]
>
>
> Note the slave and master are on correct same ip address
>
> The /etc/mesos/zk seems to be set properly : and I do see the /mesos node
> in zookeeper is updated after restarting the master
>
> However the zookeeper node is empty:
>
> [zk: localhost:2181(CONNECTED) 10] ls /mesos
> []
>
> The node is world accessible so no permission issue:
>
> [zk: localhost:2181(CONNECTED) 12] getAcl /mesos
> 'world,'anyone
> : cdrwa
>
> Why is the zookeeper node empty? Is this the reason the master and
> slaves are not connecting?
>
> 2015-09-04 14:56 GMT-07:00 craig w <co...@gmail.com>:
>
>> No problem, they have a "downloads" link inn their menu:
>> https://mesosphere.com/downloads/
>> On Sep 4, 2015 5:43 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>
>>> @Craig . That is an incomplete answer - given that such links are not
>>> presented in an obvious manner . Maybe you managed to find a link on
>>> their site that provides prebuilt for Centos7: if so then please share it.
>>>
>>>
>>> I had previously found a link on their site for prebuilt binaries but is
>>> based on using CDH4 (which is not possible for my company). It is also old.
>>>
>>> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>>>
>>>
>>> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>>>
>>>> Mesosphere has packages prebuilt, go to their site to find how to
>>>> install
>>>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>>
>>>>>
>>>>> After following the directions here:
>>>>> http://mesos.apache.org/gettingstarted/
>>>>>
>>>>> Which for centos7 includes the following:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> # Change working directory.
>>>>> $ cd mesos
>>>>>
>>>>> # Bootstrap (Only required if building from git repository).
>>>>> $ ./bootstrap
>>>>>
>>>>> # Configure and build.
>>>>> $ mkdir build
>>>>> $ cd build
>>>>> $ ../configure
>>>>> $ make
>>>>>
>>>>> In order to speed up the build and reduce verbosity of the logs, you
>>>>> can append-j <number of cores> V=0 to make.
>>>>>
>>>>> # Run test suite.
>>>>> $ make check
>>>>>
>>>>> # Install (Optional).
>>>>> $ make install
>>>>>
>>>>>
>>>>>
>>>>> But the installation is not correct afterwards: here is the bin
>>>>> directory:
>>>>>
>>>>> $ ll bin
>>>>> total 92
>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>> valgrind-mesos-tests.sh.in
>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>> valgrind-mesos-slave.sh.in
>>>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14
>>>>> valgrind-mesos-master.sh.in
>>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14
>>>>> valgrind-mesos-local.sh.in
>>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>>>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>>>
>>>>> So .. two things:
>>>>>
>>>>> (a) what is missing from the installation instructions?
>>>>>
>>>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>
Re: Basic installation question
Posted by Stephen Boesch <ja...@gmail.com>.
I installed using yum -y install mesos. That did work.
Now the master and slaves do not see each other.
Here is the master:
$ ps -ef | grep mesos | grep -v grep
stack 30236 17902 0 00:09 pts/4 00:00:04
/mnt/mesos/build/src/.libs/lt-mesos-master --work_dir=/tmp/mesos
--ip=10.xx.xx.124
Here is one of the 20 slaves:
ps -ef | grep mesos | grep -v grep
root 26086 1 0 00:10 ? 00:00:00 /usr/sbin/mesos-slave
--master=zk://10.xx.xx.124:2181/mesos --log_dir=/var/log/mesos
root 26092 26086 0 00:10 ? 00:00:00 logger -p user.info -t
mesos-slave[26086]
root 26093 26086 0 00:10 ? 00:00:00 logger -p user.err -t
mesos-slave[26086]
Note the slave and master are on correct same ip address
The /etc/mesos/zk seems to be set properly : and I do see the /mesos node
in zookeeper is updated after restarting the master
However the zookeeper node is empty:
[zk: localhost:2181(CONNECTED) 10] ls /mesos
[]
The node is world accessible so no permission issue:
[zk: localhost:2181(CONNECTED) 12] getAcl /mesos
'world,'anyone
: cdrwa
Why is the zookeeper node empty? Is this the reason the master and slaves
are not connecting?
2015-09-04 14:56 GMT-07:00 craig w <co...@gmail.com>:
> No problem, they have a "downloads" link inn their menu:
> https://mesosphere.com/downloads/
> On Sep 4, 2015 5:43 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>
>> @Craig . That is an incomplete answer - given that such links are not
>> presented in an obvious manner . Maybe you managed to find a link on
>> their site that provides prebuilt for Centos7: if so then please share it.
>>
>>
>> I had previously found a link on their site for prebuilt binaries but is
>> based on using CDH4 (which is not possible for my company). It is also old.
>>
>> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>>
>>
>> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>>
>>> Mesosphere has packages prebuilt, go to their site to find how to install
>>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>
>>>>
>>>> After following the directions here:
>>>> http://mesos.apache.org/gettingstarted/
>>>>
>>>> Which for centos7 includes the following:
>>>>
>>>>
>>>>
>>>>
>>>> # Change working directory.
>>>> $ cd mesos
>>>>
>>>> # Bootstrap (Only required if building from git repository).
>>>> $ ./bootstrap
>>>>
>>>> # Configure and build.
>>>> $ mkdir build
>>>> $ cd build
>>>> $ ../configure
>>>> $ make
>>>>
>>>> In order to speed up the build and reduce verbosity of the logs, you
>>>> can append-j <number of cores> V=0 to make.
>>>>
>>>> # Run test suite.
>>>> $ make check
>>>>
>>>> # Install (Optional).
>>>> $ make install
>>>>
>>>>
>>>>
>>>> But the installation is not correct afterwards: here is the bin
>>>> directory:
>>>>
>>>> $ ll bin
>>>> total 92
>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14
>>>> valgrind-mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>>
>>>> So .. two things:
>>>>
>>>> (a) what is missing from the installation instructions?
>>>>
>>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
Re: Basic installation question
Posted by craig w <co...@gmail.com>.
No problem, they have a "downloads" link inn their menu:
https://mesosphere.com/downloads/
On Sep 4, 2015 5:43 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
> @Craig . That is an incomplete answer - given that such links are not
> presented in an obvious manner . Maybe you managed to find a link on
> their site that provides prebuilt for Centos7: if so then please share it.
>
>
> I had previously found a link on their site for prebuilt binaries but is
> based on using CDH4 (which is not possible for my company). It is also old.
>
> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>
>
> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>
>> Mesosphere has packages prebuilt, go to their site to find how to install
>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>
>>>
>>> After following the directions here:
>>> http://mesos.apache.org/gettingstarted/
>>>
>>> Which for centos7 includes the following:
>>>
>>>
>>>
>>>
>>> # Change working directory.
>>> $ cd mesos
>>>
>>> # Bootstrap (Only required if building from git repository).
>>> $ ./bootstrap
>>>
>>> # Configure and build.
>>> $ mkdir build
>>> $ cd build
>>> $ ../configure
>>> $ make
>>>
>>> In order to speed up the build and reduce verbosity of the logs, you can
>>> append-j <number of cores> V=0 to make.
>>>
>>> # Run test suite.
>>> $ make check
>>>
>>> # Install (Optional).
>>> $ make install
>>>
>>>
>>>
>>> But the installation is not correct afterwards: here is the bin
>>> directory:
>>>
>>> $ ll bin
>>> total 92
>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>
>>> So .. two things:
>>>
>>> (a) what is missing from the installation instructions?
>>>
>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
Re: Basic installation question
Posted by Stephen Boesch <ja...@gmail.com>.
Thanks Marco,
Your prior email was on-target: i was pointing to the $mesos/bin not
$mesos/build/bin. I am moving forward now to next steps.
Thanks also for the links to the downloads: our automated VM installs
will likely want to use those.
2015-09-04 14:51 GMT-07:00 Marco Massenzio <ma...@mesosphere.io>:
> Hey Stephen,
>
> the Mesos packages for download from Mesosphere are available here:
> https://mesosphere.com/downloads/
> (for Mesos, just click on the Getting Started button - sorry, no direct
> URL - it will show the steps to install on the supported distros using
> apt-get/yum).
>
> Those work and I obviously recommend them :)
> But I think you wanted the "full developer experience" as you pointed to
> the make steps.
>
> Also, if you haven't looked at the tutorials in a while (as you seem to
> imply in your message) I would recommend you give them another shot: we've
> been doing some work on revamping them and making them more accessible.
>
>
>
> *Marco Massenzio*
>
> *Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
>
> On Fri, Sep 4, 2015 at 2:38 PM, Stephen Boesch <ja...@gmail.com> wrote:
>
>> @Craig . That is an incomplete answer - given that such links are not
>> presented in an obvious manner . Maybe you managed to find a link on
>> their site that provides prebuilt for Centos7: if so then please share it.
>>
>>
>> I had previously found a link on their site for prebuilt binaries but is
>> based on using CDH4 (which is not possible for my company). It is also old.
>>
>> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>>
>>
>> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>>
>>> Mesosphere has packages prebuilt, go to their site to find how to install
>>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>>
>>>>
>>>> After following the directions here:
>>>> http://mesos.apache.org/gettingstarted/
>>>>
>>>> Which for centos7 includes the following:
>>>>
>>>>
>>>>
>>>>
>>>> # Change working directory.
>>>> $ cd mesos
>>>>
>>>> # Bootstrap (Only required if building from git repository).
>>>> $ ./bootstrap
>>>>
>>>> # Configure and build.
>>>> $ mkdir build
>>>> $ cd build
>>>> $ ../configure
>>>> $ make
>>>>
>>>> In order to speed up the build and reduce verbosity of the logs, you
>>>> can append-j <number of cores> V=0 to make.
>>>>
>>>> # Run test suite.
>>>> $ make check
>>>>
>>>> # Install (Optional).
>>>> $ make install
>>>>
>>>>
>>>>
>>>> But the installation is not correct afterwards: here is the bin
>>>> directory:
>>>>
>>>> $ ll bin
>>>> total 92
>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14
>>>> valgrind-mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>>
>>>> So .. two things:
>>>>
>>>> (a) what is missing from the installation instructions?
>>>>
>>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>
Re: Basic installation question
Posted by Marco Massenzio <ma...@mesosphere.io>.
Hey Stephen,
the Mesos packages for download from Mesosphere are available here:
https://mesosphere.com/downloads/
(for Mesos, just click on the Getting Started button - sorry, no direct URL
- it will show the steps to install on the supported distros using
apt-get/yum).
Those work and I obviously recommend them :)
But I think you wanted the "full developer experience" as you pointed to
the make steps.
Also, if you haven't looked at the tutorials in a while (as you seem to
imply in your message) I would recommend you give them another shot: we've
been doing some work on revamping them and making them more accessible.
*Marco Massenzio*
*Distributed Systems Engineerhttp://codetrips.com <http://codetrips.com>*
On Fri, Sep 4, 2015 at 2:38 PM, Stephen Boesch <ja...@gmail.com> wrote:
> @Craig . That is an incomplete answer - given that such links are not
> presented in an obvious manner . Maybe you managed to find a link on
> their site that provides prebuilt for Centos7: if so then please share it.
>
>
> I had previously found a link on their site for prebuilt binaries but is
> based on using CDH4 (which is not possible for my company). It is also old.
>
> https://docs.mesosphere.com/tutorials/install_centos_rhel/
>
>
> 2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
>
>> Mesosphere has packages prebuilt, go to their site to find how to install
>> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>>
>>>
>>> After following the directions here:
>>> http://mesos.apache.org/gettingstarted/
>>>
>>> Which for centos7 includes the following:
>>>
>>>
>>>
>>>
>>> # Change working directory.
>>> $ cd mesos
>>>
>>> # Bootstrap (Only required if building from git repository).
>>> $ ./bootstrap
>>>
>>> # Configure and build.
>>> $ mkdir build
>>> $ cd build
>>> $ ../configure
>>> $ make
>>>
>>> In order to speed up the build and reduce verbosity of the logs, you can
>>> append-j <number of cores> V=0 to make.
>>>
>>> # Run test suite.
>>> $ make check
>>>
>>> # Install (Optional).
>>> $ make install
>>>
>>>
>>>
>>> But the installation is not correct afterwards: here is the bin
>>> directory:
>>>
>>> $ ll bin
>>> total 92
>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>>
>>> So .. two things:
>>>
>>> (a) what is missing from the installation instructions?
>>>
>>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
Re: Basic installation question
Posted by Stephen Boesch <ja...@gmail.com>.
@Craig . That is an incomplete answer - given that such links are not
presented in an obvious manner . Maybe you managed to find a link on
their site that provides prebuilt for Centos7: if so then please share it.
I had previously found a link on their site for prebuilt binaries but is
based on using CDH4 (which is not possible for my company). It is also old.
https://docs.mesosphere.com/tutorials/install_centos_rhel/
2015-09-04 14:27 GMT-07:00 craig w <co...@gmail.com>:
> Mesosphere has packages prebuilt, go to their site to find how to install
> On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>
>>
>> After following the directions here:
>> http://mesos.apache.org/gettingstarted/
>>
>> Which for centos7 includes the following:
>>
>>
>>
>>
>> # Change working directory.
>> $ cd mesos
>>
>> # Bootstrap (Only required if building from git repository).
>> $ ./bootstrap
>>
>> # Configure and build.
>> $ mkdir build
>> $ cd build
>> $ ../configure
>> $ make
>>
>> In order to speed up the build and reduce verbosity of the logs, you can
>> append-j <number of cores> V=0 to make.
>>
>> # Run test suite.
>> $ make check
>>
>> # Install (Optional).
>> $ make install
>>
>>
>>
>> But the installation is not correct afterwards: here is the bin directory:
>>
>> $ ll bin
>> total 92
>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
>> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
>> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
>> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
>> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
>> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
>> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
>> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
>> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
>> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
>> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
>> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
>> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>>
>> So .. two things:
>>
>> (a) what is missing from the installation instructions?
>>
>> (b) Is there an *up to date *rpm/yum installation for centos7?
>>
>>
>>
>>
>>
>>
>>
Re: Basic installation question
Posted by craig w <co...@gmail.com>.
Mesosphere has packages prebuilt, go to their site to find how to install
On Sep 4, 2015 5:11 PM, "Stephen Boesch" <ja...@gmail.com> wrote:
>
> After following the directions here:
> http://mesos.apache.org/gettingstarted/
>
> Which for centos7 includes the following:
>
>
>
>
> # Change working directory.
> $ cd mesos
>
> # Bootstrap (Only required if building from git repository).
> $ ./bootstrap
>
> # Configure and build.
> $ mkdir build
> $ cd build
> $ ../configure
> $ make
>
> In order to speed up the build and reduce verbosity of the logs, you can
> append-j <number of cores> V=0 to make.
>
> # Run test suite.
> $ make check
>
> # Install (Optional).
> $ make install
>
>
>
> But the installation is not correct afterwards: here is the bin directory:
>
> $ ll bin
> total 92
> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1772 Jul 17 23:14 valgrind-mesos-master.sh.in
> -rw-r--r--. 1 stack stack 1769 Jul 17 23:14 valgrind-mesos-local.sh.in
> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 901 Jul 17 23:14 mesos-tests-flags.sh.in
> -rw-r--r--. 1 stack stack 1019 Jul 17 23:14 mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1721 Jul 17 23:14 mesos-slave-flags.sh.in
> -rw-r--r--. 1 stack stack 1366 Jul 17 23:14 mesos.sh.in
> -rw-r--r--. 1 stack stack 1026 Jul 17 23:14 mesos-master.sh.in
> -rw-r--r--. 1 stack stack 858 Jul 17 23:14 mesos-master-flags.sh.in
> -rw-r--r--. 1 stack stack 1023 Jul 17 23:14 mesos-local.sh.in
> -rw-r--r--. 1 stack stack 935 Jul 17 23:14 mesos-local-flags.sh.in
> -rw-r--r--. 1 stack stack 1466 Jul 17 23:14 lldb-mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1492 Jul 17 23:14 lldb-mesos-master.sh.in
> -rw-r--r--. 1 stack stack 1489 Jul 17 23:14 lldb-mesos-local.sh.in
> -rw-r--r--. 1 stack stack 1498 Jul 17 23:14 gdb-mesos-tests.sh.in
> -rw-r--r--. 1 stack stack 1527 Jul 17 23:14 gdb-mesos-slave.sh.in
> -rw-r--r--. 1 stack stack 1530 Jul 17 23:14 gdb-mesos-master.sh.in
> -rw-r--r--. 1 stack stack 1521 Jul 17 23:14 gdb-mesos-local.sh.in
> drwxr-xr-x. 2 stack stack 4096 Jul 17 23:21 .
> drwxr-xr-x. 11 stack stack 4096 Sep 4 20:08 ..
>
> So .. two things:
>
> (a) what is missing from the installation instructions?
>
> (b) Is there an *up to date *rpm/yum installation for centos7?
>
>
>
>
>
>
>