You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tapestry.apache.org by Kalle Korhonen <ka...@gmail.com> on 2012/02/17 01:52:55 UTC
Re: fckeditor for Tapestry 5.3
Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work with
ajax forms? I was hoping to use your component as part of a new
project. I had hacked chenillekit's fckeditor a few years go to work
with ajax and I imagine this might need similar type of treatment if
it's not already supported.
Kalle
On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <du...@gmail.com> wrote:
> You can try out our implementation:
> https://github.com/plannowtech/tapestry5-ckeditor
>
> It's still not thoroughly tested, but should work fine.
>
> Any remarks/complaints/bugs should be reported on GitHub.
>
> --
> Dusko Jovanovski
>
> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com> wrote:
>
>> Do we have one? If so, any link to setup and download it? I don't use Maven
>> just FYI.
>>
>> Thanks.
>>
>> --
>> View this message in context:
>> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
>> Sent from the Tapestry - User mailing list archive at Nabble.com.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: fckeditor for Tapestry 5.3
Posted by Dragan Sahpaski <dr...@gmail.com>.
Hey Kalle,
See the latest commit. It resolves this issues properly.
On each ajax zone update a new ckeditor instance is created and the old
ones are properly destoyed using ckeditorinstance.destroy(). Also the
attached event handlers on FORM_PREPARE_FOR_SUBMIT_EVENT are removed.
There was a simpler solution destroying the current ckeditor in
the FORM_PREPARE_FOR_SUBMIT_EVENT event handler but this caused blinking
effect so it was visually not appealing.
Share your thoughts if you get to use it, also if you notice further
problems please report them.
I'll be prob writing some integration tests soon, its on the issues list.
Also if you have some ideas what would be the easiest way for this small
project to be published on maven central please share.
Cheers,
Dragan Sahpaski
On Fri, Feb 17, 2012 at 10:32 PM, Kalle Korhonen <kalle.o.korhonen@gmail.com
> wrote:
> On Fri, Feb 17, 2012 at 12:33 PM, Dragan Sahpaski
> <dr...@gmail.com> wrote:
> > OK I see it. After merging the pull request the changes are not saved at
> > all. Previously the field gets updated although an errors in the
> javascript
> > console are thrown upon zone update.
>
> After merging mine you mean? Yes, that may be the case, but in
> principle that's correct way of updating the field and it just makes
> the underlying problem visible. Before, "the interesting effects" I
> mentioned meant that the field might have been updated with the
> contents of the previous zone update, or it might not update all,
> depending on which editor instance the user got. The bottom line is
> that if there are multiple editor instances associated with the same
> element, it's going to blow up sooner or later.
>
> > I'm on it and will get back to you tomorrow, hopefully with a solution.
>
> No problem - perhaps you can just check if an editor instance exists
> already. For my use case, it's enough that I get the contents via xhr
> post, I don't need the editor field to be in the zone.
>
> Kalle
>
>
> > On Fri, Feb 17, 2012 at 5:02 PM, Kalle Korhonen
> > <ka...@gmail.com>wrote:
> >
> >> On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
> >> <dr...@gmail.com> wrote:
> >> > I'm not quite following you. I've successfully tested it with multiple
> >> > editors in one zone with form and it's ok.
> >> > Can you send me an example page which has this problem? I promise to
> look
> >> > at it right away.
> >>
> >> Odd then, I get multiple editors (and I mean multiple internal
> >> CKeditor instances, not visible editors) if I just do:
> >> <t:zone t:id="textAreaZone">
> >> <t:form id="textAreaForm" t:zone="textAreaZone">
> >> <t:errors/>
> >> <t:textArea id="textArea" t:mixins="pn/CKEditor"
> >> value="textValue"
> >> parameters="{'toolbar': 'Basic'}" />
> >> <input type="submit" value="OK"/>
> >> </t:form>
> >> <p><t:outputRaw value="textValue"/></p>
> >> </t:zone>
> >>
> >> Now if I just zone in the outputRaw, things work as expected. I'm
> >> returning a zone.getBody from onSuccess(). I really didn't have any
> >> existing code, I was just trying out different editor components on an
> >> empty archetype.
> >>
> >> Kalle
> >>
> >>
> >>
> >> > On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
> >> > <ka...@gmail.com>wrote:
> >> >
> >> >> Ah well, partly a user error. If you have the component (mixin)
> >> >> wrapped in a zone, you'll get multiple instances of CKEditor with
> >> >> plenty of interesting effects. It does make sense not to
> re-initialize
> >> >> it during ajax updates but wasn't ready to spend enough time to find
> >> >> the appropriate place to add safeguards to prevent multiple instances
> >> >> within the same zone. Sent a pull request anyway for a minor clean-up
> >> >> while I was working on it.
> >> >>
> >> >> Kalle
> >> >>
> >> >>
> >> >> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
> >> >> <ka...@gmail.com> wrote:
> >> >> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work
> with
> >> >> > ajax forms? I was hoping to use your component as part of a new
> >> >> > project. I had hacked chenillekit's fckeditor a few years go to
> work
> >> >> > with ajax and I imagine this might need similar type of treatment
> if
> >> >> > it's not already supported.
> >> >> >
> >> >> > Kalle
> >> >> >
> >> >> >
> >> >> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <
> duskote@gmail.com
> >> >
> >> >> wrote:
> >> >> >> You can try out our implementation:
> >> >> >> https://github.com/plannowtech/tapestry5-ckeditor
> >> >> >>
> >> >> >> It's still not thoroughly tested, but should work fine.
> >> >> >>
> >> >> >> Any remarks/complaints/bugs should be reported on GitHub.
> >> >> >>
> >> >> >> --
> >> >> >> Dusko Jovanovski
> >> >> >>
> >> >> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com>
> wrote:
> >> >> >>
> >> >> >>> Do we have one? If so, any link to setup and download it? I don't
> >> use
> >> >> Maven
> >> >> >>> just FYI.
> >> >> >>>
> >> >> >>> Thanks.
> >> >> >>>
> >> >> >>> --
> >> >> >>> View this message in context:
> >> >> >>>
> >> >>
> >>
> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
> >> >> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
> >> >> >>>
> >> >> >>>
> >> ---------------------------------------------------------------------
> >> >> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> >>> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >> >>>
> >> >> >>>
> >> >>
> >> >> ---------------------------------------------------------------------
> >> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >>
> >> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >>
> >>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
Re: fckeditor for Tapestry 5.3
Posted by Dragan Sahpaski <dr...@gmail.com>.
Hi Kalle,
Merging this with tynamo? Why not.
You can email me what needs to be done.
Although before we do it I would like at lest to make some tests to make
the module at least half decent.
I'm thinking it would also be nice to have support for ALL ckeditor
features like image and flash upload on the server, but you can make a
priority list if you are more familiar with what would be most useful to be
implemented first. I'm willing to spend time working on them.
Cheers,
Dragan Sahpaski
On Thu, Mar 1, 2012 at 4:51 AM, Kalle Korhonen
<ka...@gmail.com>wrote:
> On Sat, Feb 18, 2012 at 10:11 AM, Dragan Sahpaski
> <dr...@gmail.com> wrote:
> > Hey Kalle,
> > See the latest commit. It resolves this issues properly.
> > On each ajax zone update a new ckeditor instance is created and the old
> > ones are properly destoyed using ckeditorinstance.destroy(). Also the
> > attached event handlers on FORM_PREPARE_FOR_SUBMIT_EVENT are removed.
>
> Thanks Dragan, looking good now.
>
> > Also if you have some ideas what would be the easiest way for this small
> > project to be published on maven central please share.
>
> Well, the easiest is to host the code with an organization (e.g.
> codehaus) that has the necessary infrastructure set up already to push
> to central. However, it's not too bad to sign up with Sonatype's OSSRH
> (see
> https://docs.sonatype.org/display/Repository/Sonatype+OSS+Maven+Repository+Usage+Guide
> )
> using your own group id, assuming you plan to continue using
> com.plannow.tapestry5 as the groupid. As a third option, or more
> accurately, as an extension of the first option, perhaps we could make
> it a new Tynamo.org module. I've purposefully avoided involving Tynamo
> with UI component business but it might just make sense to make an
> exception in this case especially since I kind of decided already to
> go ahead with implementing the "light CMS" editable content concept
> (which I described in another thread) myself since it'd take too long
> as a GSoC project with unpredictable results for my needs. In any
> case, the CKEditor component is good enough for my needs.
>
> Kalle
>
>
> > On Fri, Feb 17, 2012 at 10:32 PM, Kalle Korhonen <
> kalle.o.korhonen@gmail.com
> >> wrote:
> >
> >> On Fri, Feb 17, 2012 at 12:33 PM, Dragan Sahpaski
> >> <dr...@gmail.com> wrote:
> >> > OK I see it. After merging the pull request the changes are not saved
> at
> >> > all. Previously the field gets updated although an errors in the
> >> javascript
> >> > console are thrown upon zone update.
> >>
> >> After merging mine you mean? Yes, that may be the case, but in
> >> principle that's correct way of updating the field and it just makes
> >> the underlying problem visible. Before, "the interesting effects" I
> >> mentioned meant that the field might have been updated with the
> >> contents of the previous zone update, or it might not update all,
> >> depending on which editor instance the user got. The bottom line is
> >> that if there are multiple editor instances associated with the same
> >> element, it's going to blow up sooner or later.
> >>
> >> > I'm on it and will get back to you tomorrow, hopefully with a
> solution.
> >>
> >> No problem - perhaps you can just check if an editor instance exists
> >> already. For my use case, it's enough that I get the contents via xhr
> >> post, I don't need the editor field to be in the zone.
> >>
> >> Kalle
> >>
> >>
> >> > On Fri, Feb 17, 2012 at 5:02 PM, Kalle Korhonen
> >> > <ka...@gmail.com>wrote:
> >> >
> >> >> On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
> >> >> <dr...@gmail.com> wrote:
> >> >> > I'm not quite following you. I've successfully tested it with
> multiple
> >> >> > editors in one zone with form and it's ok.
> >> >> > Can you send me an example page which has this problem? I promise
> to
> >> look
> >> >> > at it right away.
> >> >>
> >> >> Odd then, I get multiple editors (and I mean multiple internal
> >> >> CKeditor instances, not visible editors) if I just do:
> >> >> <t:zone t:id="textAreaZone">
> >> >> <t:form id="textAreaForm" t:zone="textAreaZone">
> >> >> <t:errors/>
> >> >> <t:textArea id="textArea" t:mixins="pn/CKEditor"
> >> >> value="textValue"
> >> >> parameters="{'toolbar': 'Basic'}" />
> >> >> <input type="submit" value="OK"/>
> >> >> </t:form>
> >> >> <p><t:outputRaw value="textValue"/></p>
> >> >> </t:zone>
> >> >>
> >> >> Now if I just zone in the outputRaw, things work as expected. I'm
> >> >> returning a zone.getBody from onSuccess(). I really didn't have any
> >> >> existing code, I was just trying out different editor components on
> an
> >> >> empty archetype.
> >> >>
> >> >> Kalle
> >> >>
> >> >>
> >> >>
> >> >> > On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
> >> >> > <ka...@gmail.com>wrote:
> >> >> >
> >> >> >> Ah well, partly a user error. If you have the component (mixin)
> >> >> >> wrapped in a zone, you'll get multiple instances of CKEditor with
> >> >> >> plenty of interesting effects. It does make sense not to
> >> re-initialize
> >> >> >> it during ajax updates but wasn't ready to spend enough time to
> find
> >> >> >> the appropriate place to add safeguards to prevent multiple
> instances
> >> >> >> within the same zone. Sent a pull request anyway for a minor
> clean-up
> >> >> >> while I was working on it.
> >> >> >>
> >> >> >> Kalle
> >> >> >>
> >> >> >>
> >> >> >> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
> >> >> >> <ka...@gmail.com> wrote:
> >> >> >> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work
> >> with
> >> >> >> > ajax forms? I was hoping to use your component as part of a new
> >> >> >> > project. I had hacked chenillekit's fckeditor a few years go to
> >> work
> >> >> >> > with ajax and I imagine this might need similar type of
> treatment
> >> if
> >> >> >> > it's not already supported.
> >> >> >> >
> >> >> >> > Kalle
> >> >> >> >
> >> >> >> >
> >> >> >> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <
> >> duskote@gmail.com
> >> >> >
> >> >> >> wrote:
> >> >> >> >> You can try out our implementation:
> >> >> >> >> https://github.com/plannowtech/tapestry5-ckeditor
> >> >> >> >>
> >> >> >> >> It's still not thoroughly tested, but should work fine.
> >> >> >> >>
> >> >> >> >> Any remarks/complaints/bugs should be reported on GitHub.
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >> Dusko Jovanovski
> >> >> >> >>
> >> >> >> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com>
> >> wrote:
> >> >> >> >>
> >> >> >> >>> Do we have one? If so, any link to setup and download it? I
> don't
> >> >> use
> >> >> >> Maven
> >> >> >> >>> just FYI.
> >> >> >> >>>
> >> >> >> >>> Thanks.
> >> >> >> >>>
> >> >> >> >>> --
> >> >> >> >>> View this message in context:
> >> >> >> >>>
> >> >> >>
> >> >>
> >>
> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
> >> >> >> >>> Sent from the Tapestry - User mailing list archive at
> Nabble.com.
> >> >> >> >>>
> >> >> >> >>>
> >> >> ---------------------------------------------------------------------
> >> >> >> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> >> >>> For additional commands, e-mail:
> users-help@tapestry.apache.org
> >> >> >> >>>
> >> >> >> >>>
> >> >> >>
> >> >> >>
> ---------------------------------------------------------------------
> >> >> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >> >>
> >> >> >>
> >> >>
> >> >> ---------------------------------------------------------------------
> >> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >>
> >> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >>
> >>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
Re: fckeditor for Tapestry 5.3
Posted by Kalle Korhonen <ka...@gmail.com>.
On Sat, Feb 18, 2012 at 10:11 AM, Dragan Sahpaski
<dr...@gmail.com> wrote:
> Hey Kalle,
> See the latest commit. It resolves this issues properly.
> On each ajax zone update a new ckeditor instance is created and the old
> ones are properly destoyed using ckeditorinstance.destroy(). Also the
> attached event handlers on FORM_PREPARE_FOR_SUBMIT_EVENT are removed.
Thanks Dragan, looking good now.
> Also if you have some ideas what would be the easiest way for this small
> project to be published on maven central please share.
Well, the easiest is to host the code with an organization (e.g.
codehaus) that has the necessary infrastructure set up already to push
to central. However, it's not too bad to sign up with Sonatype's OSSRH
(see https://docs.sonatype.org/display/Repository/Sonatype+OSS+Maven+Repository+Usage+Guide)
using your own group id, assuming you plan to continue using
com.plannow.tapestry5 as the groupid. As a third option, or more
accurately, as an extension of the first option, perhaps we could make
it a new Tynamo.org module. I've purposefully avoided involving Tynamo
with UI component business but it might just make sense to make an
exception in this case especially since I kind of decided already to
go ahead with implementing the "light CMS" editable content concept
(which I described in another thread) myself since it'd take too long
as a GSoC project with unpredictable results for my needs. In any
case, the CKEditor component is good enough for my needs.
Kalle
> On Fri, Feb 17, 2012 at 10:32 PM, Kalle Korhonen <kalle.o.korhonen@gmail.com
>> wrote:
>
>> On Fri, Feb 17, 2012 at 12:33 PM, Dragan Sahpaski
>> <dr...@gmail.com> wrote:
>> > OK I see it. After merging the pull request the changes are not saved at
>> > all. Previously the field gets updated although an errors in the
>> javascript
>> > console are thrown upon zone update.
>>
>> After merging mine you mean? Yes, that may be the case, but in
>> principle that's correct way of updating the field and it just makes
>> the underlying problem visible. Before, "the interesting effects" I
>> mentioned meant that the field might have been updated with the
>> contents of the previous zone update, or it might not update all,
>> depending on which editor instance the user got. The bottom line is
>> that if there are multiple editor instances associated with the same
>> element, it's going to blow up sooner or later.
>>
>> > I'm on it and will get back to you tomorrow, hopefully with a solution.
>>
>> No problem - perhaps you can just check if an editor instance exists
>> already. For my use case, it's enough that I get the contents via xhr
>> post, I don't need the editor field to be in the zone.
>>
>> Kalle
>>
>>
>> > On Fri, Feb 17, 2012 at 5:02 PM, Kalle Korhonen
>> > <ka...@gmail.com>wrote:
>> >
>> >> On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
>> >> <dr...@gmail.com> wrote:
>> >> > I'm not quite following you. I've successfully tested it with multiple
>> >> > editors in one zone with form and it's ok.
>> >> > Can you send me an example page which has this problem? I promise to
>> look
>> >> > at it right away.
>> >>
>> >> Odd then, I get multiple editors (and I mean multiple internal
>> >> CKeditor instances, not visible editors) if I just do:
>> >> <t:zone t:id="textAreaZone">
>> >> <t:form id="textAreaForm" t:zone="textAreaZone">
>> >> <t:errors/>
>> >> <t:textArea id="textArea" t:mixins="pn/CKEditor"
>> >> value="textValue"
>> >> parameters="{'toolbar': 'Basic'}" />
>> >> <input type="submit" value="OK"/>
>> >> </t:form>
>> >> <p><t:outputRaw value="textValue"/></p>
>> >> </t:zone>
>> >>
>> >> Now if I just zone in the outputRaw, things work as expected. I'm
>> >> returning a zone.getBody from onSuccess(). I really didn't have any
>> >> existing code, I was just trying out different editor components on an
>> >> empty archetype.
>> >>
>> >> Kalle
>> >>
>> >>
>> >>
>> >> > On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
>> >> > <ka...@gmail.com>wrote:
>> >> >
>> >> >> Ah well, partly a user error. If you have the component (mixin)
>> >> >> wrapped in a zone, you'll get multiple instances of CKEditor with
>> >> >> plenty of interesting effects. It does make sense not to
>> re-initialize
>> >> >> it during ajax updates but wasn't ready to spend enough time to find
>> >> >> the appropriate place to add safeguards to prevent multiple instances
>> >> >> within the same zone. Sent a pull request anyway for a minor clean-up
>> >> >> while I was working on it.
>> >> >>
>> >> >> Kalle
>> >> >>
>> >> >>
>> >> >> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
>> >> >> <ka...@gmail.com> wrote:
>> >> >> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work
>> with
>> >> >> > ajax forms? I was hoping to use your component as part of a new
>> >> >> > project. I had hacked chenillekit's fckeditor a few years go to
>> work
>> >> >> > with ajax and I imagine this might need similar type of treatment
>> if
>> >> >> > it's not already supported.
>> >> >> >
>> >> >> > Kalle
>> >> >> >
>> >> >> >
>> >> >> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <
>> duskote@gmail.com
>> >> >
>> >> >> wrote:
>> >> >> >> You can try out our implementation:
>> >> >> >> https://github.com/plannowtech/tapestry5-ckeditor
>> >> >> >>
>> >> >> >> It's still not thoroughly tested, but should work fine.
>> >> >> >>
>> >> >> >> Any remarks/complaints/bugs should be reported on GitHub.
>> >> >> >>
>> >> >> >> --
>> >> >> >> Dusko Jovanovski
>> >> >> >>
>> >> >> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com>
>> wrote:
>> >> >> >>
>> >> >> >>> Do we have one? If so, any link to setup and download it? I don't
>> >> use
>> >> >> Maven
>> >> >> >>> just FYI.
>> >> >> >>>
>> >> >> >>> Thanks.
>> >> >> >>>
>> >> >> >>> --
>> >> >> >>> View this message in context:
>> >> >> >>>
>> >> >>
>> >>
>> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
>> >> >> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
>> >> >> >>>
>> >> >> >>>
>> >> ---------------------------------------------------------------------
>> >> >> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> >> >> >>> For additional commands, e-mail: users-help@tapestry.apache.org
>> >> >> >>>
>> >> >> >>>
>> >> >>
>> >> >> ---------------------------------------------------------------------
>> >> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> >> >> For additional commands, e-mail: users-help@tapestry.apache.org
>> >> >>
>> >> >>
>> >>
>> >> ---------------------------------------------------------------------
>> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> >> For additional commands, e-mail: users-help@tapestry.apache.org
>> >>
>> >>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: fckeditor for Tapestry 5.3
Posted by Dragan Sahpaski <dr...@gmail.com>.
Hey Kalle,
See the latest commit. It resolves this issues properly.
On each ajax zone update a new ckeditor instance is created and the old
ones are properly destoyed using ckeditorinstance.destroy(). Also the
attached event handlers on FORM_PREPARE_FOR_SUBMIT_EVENT are removed.
There was a simpler solution destroying the current ckeditor in
the FORM_PREPARE_FOR_SUBMIT_EVENT event handler but this caused blinking
effect so it was visually not appealing.
Share your thoughts if you get to use it, also if you notice further
problems please report them.
I'll be prob writing some integration tests soon, its on the issues list.
Also if you have some ideas what would be the easiest way for this small
project to be published on maven central please share.
Cheers,
Dragan Sahpaski
On Fri, Feb 17, 2012 at 10:32 PM, Kalle Korhonen <kalle.o.korhonen@gmail.com
> wrote:
> On Fri, Feb 17, 2012 at 12:33 PM, Dragan Sahpaski
> <dr...@gmail.com> wrote:
> > OK I see it. After merging the pull request the changes are not saved at
> > all. Previously the field gets updated although an errors in the
> javascript
> > console are thrown upon zone update.
>
> After merging mine you mean? Yes, that may be the case, but in
> principle that's correct way of updating the field and it just makes
> the underlying problem visible. Before, "the interesting effects" I
> mentioned meant that the field might have been updated with the
> contents of the previous zone update, or it might not update all,
> depending on which editor instance the user got. The bottom line is
> that if there are multiple editor instances associated with the same
> element, it's going to blow up sooner or later.
>
> > I'm on it and will get back to you tomorrow, hopefully with a solution.
>
> No problem - perhaps you can just check if an editor instance exists
> already. For my use case, it's enough that I get the contents via xhr
> post, I don't need the editor field to be in the zone.
>
> Kalle
>
>
> > On Fri, Feb 17, 2012 at 5:02 PM, Kalle Korhonen
> > <ka...@gmail.com>wrote:
> >
> >> On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
> >> <dr...@gmail.com> wrote:
> >> > I'm not quite following you. I've successfully tested it with multiple
> >> > editors in one zone with form and it's ok.
> >> > Can you send me an example page which has this problem? I promise to
> look
> >> > at it right away.
> >>
> >> Odd then, I get multiple editors (and I mean multiple internal
> >> CKeditor instances, not visible editors) if I just do:
> >> <t:zone t:id="textAreaZone">
> >> <t:form id="textAreaForm" t:zone="textAreaZone">
> >> <t:errors/>
> >> <t:textArea id="textArea" t:mixins="pn/CKEditor"
> >> value="textValue"
> >> parameters="{'toolbar': 'Basic'}" />
> >> <input type="submit" value="OK"/>
> >> </t:form>
> >> <p><t:outputRaw value="textValue"/></p>
> >> </t:zone>
> >>
> >> Now if I just zone in the outputRaw, things work as expected. I'm
> >> returning a zone.getBody from onSuccess(). I really didn't have any
> >> existing code, I was just trying out different editor components on an
> >> empty archetype.
> >>
> >> Kalle
> >>
> >>
> >>
> >> > On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
> >> > <ka...@gmail.com>wrote:
> >> >
> >> >> Ah well, partly a user error. If you have the component (mixin)
> >> >> wrapped in a zone, you'll get multiple instances of CKEditor with
> >> >> plenty of interesting effects. It does make sense not to
> re-initialize
> >> >> it during ajax updates but wasn't ready to spend enough time to find
> >> >> the appropriate place to add safeguards to prevent multiple instances
> >> >> within the same zone. Sent a pull request anyway for a minor clean-up
> >> >> while I was working on it.
> >> >>
> >> >> Kalle
> >> >>
> >> >>
> >> >> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
> >> >> <ka...@gmail.com> wrote:
> >> >> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work
> with
> >> >> > ajax forms? I was hoping to use your component as part of a new
> >> >> > project. I had hacked chenillekit's fckeditor a few years go to
> work
> >> >> > with ajax and I imagine this might need similar type of treatment
> if
> >> >> > it's not already supported.
> >> >> >
> >> >> > Kalle
> >> >> >
> >> >> >
> >> >> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <
> duskote@gmail.com
> >> >
> >> >> wrote:
> >> >> >> You can try out our implementation:
> >> >> >> https://github.com/plannowtech/tapestry5-ckeditor
> >> >> >>
> >> >> >> It's still not thoroughly tested, but should work fine.
> >> >> >>
> >> >> >> Any remarks/complaints/bugs should be reported on GitHub.
> >> >> >>
> >> >> >> --
> >> >> >> Dusko Jovanovski
> >> >> >>
> >> >> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com>
> wrote:
> >> >> >>
> >> >> >>> Do we have one? If so, any link to setup and download it? I don't
> >> use
> >> >> Maven
> >> >> >>> just FYI.
> >> >> >>>
> >> >> >>> Thanks.
> >> >> >>>
> >> >> >>> --
> >> >> >>> View this message in context:
> >> >> >>>
> >> >>
> >>
> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
> >> >> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
> >> >> >>>
> >> >> >>>
> >> ---------------------------------------------------------------------
> >> >> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> >>> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >> >>>
> >> >> >>>
> >> >>
> >> >> ---------------------------------------------------------------------
> >> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >>
> >> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >>
> >>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
Re: fckeditor for Tapestry 5.3
Posted by Kalle Korhonen <ka...@gmail.com>.
On Fri, Feb 17, 2012 at 12:33 PM, Dragan Sahpaski
<dr...@gmail.com> wrote:
> OK I see it. After merging the pull request the changes are not saved at
> all. Previously the field gets updated although an errors in the javascript
> console are thrown upon zone update.
After merging mine you mean? Yes, that may be the case, but in
principle that's correct way of updating the field and it just makes
the underlying problem visible. Before, "the interesting effects" I
mentioned meant that the field might have been updated with the
contents of the previous zone update, or it might not update all,
depending on which editor instance the user got. The bottom line is
that if there are multiple editor instances associated with the same
element, it's going to blow up sooner or later.
> I'm on it and will get back to you tomorrow, hopefully with a solution.
No problem - perhaps you can just check if an editor instance exists
already. For my use case, it's enough that I get the contents via xhr
post, I don't need the editor field to be in the zone.
Kalle
> On Fri, Feb 17, 2012 at 5:02 PM, Kalle Korhonen
> <ka...@gmail.com>wrote:
>
>> On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
>> <dr...@gmail.com> wrote:
>> > I'm not quite following you. I've successfully tested it with multiple
>> > editors in one zone with form and it's ok.
>> > Can you send me an example page which has this problem? I promise to look
>> > at it right away.
>>
>> Odd then, I get multiple editors (and I mean multiple internal
>> CKeditor instances, not visible editors) if I just do:
>> <t:zone t:id="textAreaZone">
>> <t:form id="textAreaForm" t:zone="textAreaZone">
>> <t:errors/>
>> <t:textArea id="textArea" t:mixins="pn/CKEditor"
>> value="textValue"
>> parameters="{'toolbar': 'Basic'}" />
>> <input type="submit" value="OK"/>
>> </t:form>
>> <p><t:outputRaw value="textValue"/></p>
>> </t:zone>
>>
>> Now if I just zone in the outputRaw, things work as expected. I'm
>> returning a zone.getBody from onSuccess(). I really didn't have any
>> existing code, I was just trying out different editor components on an
>> empty archetype.
>>
>> Kalle
>>
>>
>>
>> > On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
>> > <ka...@gmail.com>wrote:
>> >
>> >> Ah well, partly a user error. If you have the component (mixin)
>> >> wrapped in a zone, you'll get multiple instances of CKEditor with
>> >> plenty of interesting effects. It does make sense not to re-initialize
>> >> it during ajax updates but wasn't ready to spend enough time to find
>> >> the appropriate place to add safeguards to prevent multiple instances
>> >> within the same zone. Sent a pull request anyway for a minor clean-up
>> >> while I was working on it.
>> >>
>> >> Kalle
>> >>
>> >>
>> >> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
>> >> <ka...@gmail.com> wrote:
>> >> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work with
>> >> > ajax forms? I was hoping to use your component as part of a new
>> >> > project. I had hacked chenillekit's fckeditor a few years go to work
>> >> > with ajax and I imagine this might need similar type of treatment if
>> >> > it's not already supported.
>> >> >
>> >> > Kalle
>> >> >
>> >> >
>> >> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <duskote@gmail.com
>> >
>> >> wrote:
>> >> >> You can try out our implementation:
>> >> >> https://github.com/plannowtech/tapestry5-ckeditor
>> >> >>
>> >> >> It's still not thoroughly tested, but should work fine.
>> >> >>
>> >> >> Any remarks/complaints/bugs should be reported on GitHub.
>> >> >>
>> >> >> --
>> >> >> Dusko Jovanovski
>> >> >>
>> >> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com> wrote:
>> >> >>
>> >> >>> Do we have one? If so, any link to setup and download it? I don't
>> use
>> >> Maven
>> >> >>> just FYI.
>> >> >>>
>> >> >>> Thanks.
>> >> >>>
>> >> >>> --
>> >> >>> View this message in context:
>> >> >>>
>> >>
>> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
>> >> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
>> >> >>>
>> >> >>>
>> ---------------------------------------------------------------------
>> >> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> >> >>> For additional commands, e-mail: users-help@tapestry.apache.org
>> >> >>>
>> >> >>>
>> >>
>> >> ---------------------------------------------------------------------
>> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> >> For additional commands, e-mail: users-help@tapestry.apache.org
>> >>
>> >>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: fckeditor for Tapestry 5.3
Posted by Dragan Sahpaski <dr...@gmail.com>.
Hi,
OK I see it. After merging the pull request the changes are not saved at
all. Previously the field gets updated although an errors in the javascript
console are thrown upon zone update.
I tested it after the merge but somehow it didn't reload the page and while
I did it in a hurry didn't spot this.
I'm on it and will get back to you tomorrow, hopefully with a solution.
Cheers,
Dragan Sahpaski
On Fri, Feb 17, 2012 at 5:02 PM, Kalle Korhonen
<ka...@gmail.com>wrote:
> On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
> <dr...@gmail.com> wrote:
> > I'm not quite following you. I've successfully tested it with multiple
> > editors in one zone with form and it's ok.
> > Can you send me an example page which has this problem? I promise to look
> > at it right away.
>
> Odd then, I get multiple editors (and I mean multiple internal
> CKeditor instances, not visible editors) if I just do:
> <t:zone t:id="textAreaZone">
> <t:form id="textAreaForm" t:zone="textAreaZone">
> <t:errors/>
> <t:textArea id="textArea" t:mixins="pn/CKEditor"
> value="textValue"
> parameters="{'toolbar': 'Basic'}" />
> <input type="submit" value="OK"/>
> </t:form>
> <p><t:outputRaw value="textValue"/></p>
> </t:zone>
>
> Now if I just zone in the outputRaw, things work as expected. I'm
> returning a zone.getBody from onSuccess(). I really didn't have any
> existing code, I was just trying out different editor components on an
> empty archetype.
>
> Kalle
>
>
>
> > On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
> > <ka...@gmail.com>wrote:
> >
> >> Ah well, partly a user error. If you have the component (mixin)
> >> wrapped in a zone, you'll get multiple instances of CKEditor with
> >> plenty of interesting effects. It does make sense not to re-initialize
> >> it during ajax updates but wasn't ready to spend enough time to find
> >> the appropriate place to add safeguards to prevent multiple instances
> >> within the same zone. Sent a pull request anyway for a minor clean-up
> >> while I was working on it.
> >>
> >> Kalle
> >>
> >>
> >> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
> >> <ka...@gmail.com> wrote:
> >> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work with
> >> > ajax forms? I was hoping to use your component as part of a new
> >> > project. I had hacked chenillekit's fckeditor a few years go to work
> >> > with ajax and I imagine this might need similar type of treatment if
> >> > it's not already supported.
> >> >
> >> > Kalle
> >> >
> >> >
> >> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <duskote@gmail.com
> >
> >> wrote:
> >> >> You can try out our implementation:
> >> >> https://github.com/plannowtech/tapestry5-ckeditor
> >> >>
> >> >> It's still not thoroughly tested, but should work fine.
> >> >>
> >> >> Any remarks/complaints/bugs should be reported on GitHub.
> >> >>
> >> >> --
> >> >> Dusko Jovanovski
> >> >>
> >> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com> wrote:
> >> >>
> >> >>> Do we have one? If so, any link to setup and download it? I don't
> use
> >> Maven
> >> >>> just FYI.
> >> >>>
> >> >>> Thanks.
> >> >>>
> >> >>> --
> >> >>> View this message in context:
> >> >>>
> >>
> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
> >> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
> >> >>>
> >> >>>
> ---------------------------------------------------------------------
> >> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> >>> For additional commands, e-mail: users-help@tapestry.apache.org
> >> >>>
> >> >>>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >>
> >>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
Re: fckeditor for Tapestry 5.3
Posted by Kalle Korhonen <ka...@gmail.com>.
On Fri, Feb 17, 2012 at 4:42 AM, Dragan Sahpaski
<dr...@gmail.com> wrote:
> I'm not quite following you. I've successfully tested it with multiple
> editors in one zone with form and it's ok.
> Can you send me an example page which has this problem? I promise to look
> at it right away.
Odd then, I get multiple editors (and I mean multiple internal
CKeditor instances, not visible editors) if I just do:
<t:zone t:id="textAreaZone">
<t:form id="textAreaForm" t:zone="textAreaZone">
<t:errors/>
<t:textArea id="textArea" t:mixins="pn/CKEditor" value="textValue"
parameters="{'toolbar': 'Basic'}" />
<input type="submit" value="OK"/>
</t:form>
<p><t:outputRaw value="textValue"/></p>
</t:zone>
Now if I just zone in the outputRaw, things work as expected. I'm
returning a zone.getBody from onSuccess(). I really didn't have any
existing code, I was just trying out different editor components on an
empty archetype.
Kalle
> On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
> <ka...@gmail.com>wrote:
>
>> Ah well, partly a user error. If you have the component (mixin)
>> wrapped in a zone, you'll get multiple instances of CKEditor with
>> plenty of interesting effects. It does make sense not to re-initialize
>> it during ajax updates but wasn't ready to spend enough time to find
>> the appropriate place to add safeguards to prevent multiple instances
>> within the same zone. Sent a pull request anyway for a minor clean-up
>> while I was working on it.
>>
>> Kalle
>>
>>
>> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
>> <ka...@gmail.com> wrote:
>> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work with
>> > ajax forms? I was hoping to use your component as part of a new
>> > project. I had hacked chenillekit's fckeditor a few years go to work
>> > with ajax and I imagine this might need similar type of treatment if
>> > it's not already supported.
>> >
>> > Kalle
>> >
>> >
>> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <du...@gmail.com>
>> wrote:
>> >> You can try out our implementation:
>> >> https://github.com/plannowtech/tapestry5-ckeditor
>> >>
>> >> It's still not thoroughly tested, but should work fine.
>> >>
>> >> Any remarks/complaints/bugs should be reported on GitHub.
>> >>
>> >> --
>> >> Dusko Jovanovski
>> >>
>> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com> wrote:
>> >>
>> >>> Do we have one? If so, any link to setup and download it? I don't use
>> Maven
>> >>> just FYI.
>> >>>
>> >>> Thanks.
>> >>>
>> >>> --
>> >>> View this message in context:
>> >>>
>> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
>> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
>> >>>
>> >>> ---------------------------------------------------------------------
>> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> >>> For additional commands, e-mail: users-help@tapestry.apache.org
>> >>>
>> >>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: fckeditor for Tapestry 5.3
Posted by Dragan Sahpaski <dr...@gmail.com>.
Hi Kalle,
Thanks for the code cleanup.
I'm not quite following you. I've successfully tested it with multiple
editors in one zone with form and it's ok.
Can you send me an example page which has this problem? I promise to look
at it right away.
Cheers,
Dragan Sahpaski
On Fri, Feb 17, 2012 at 9:05 AM, Kalle Korhonen
<ka...@gmail.com>wrote:
> Ah well, partly a user error. If you have the component (mixin)
> wrapped in a zone, you'll get multiple instances of CKEditor with
> plenty of interesting effects. It does make sense not to re-initialize
> it during ajax updates but wasn't ready to spend enough time to find
> the appropriate place to add safeguards to prevent multiple instances
> within the same zone. Sent a pull request anyway for a minor clean-up
> while I was working on it.
>
> Kalle
>
>
> On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
> <ka...@gmail.com> wrote:
> > Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work with
> > ajax forms? I was hoping to use your component as part of a new
> > project. I had hacked chenillekit's fckeditor a few years go to work
> > with ajax and I imagine this might need similar type of treatment if
> > it's not already supported.
> >
> > Kalle
> >
> >
> > On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <du...@gmail.com>
> wrote:
> >> You can try out our implementation:
> >> https://github.com/plannowtech/tapestry5-ckeditor
> >>
> >> It's still not thoroughly tested, but should work fine.
> >>
> >> Any remarks/complaints/bugs should be reported on GitHub.
> >>
> >> --
> >> Dusko Jovanovski
> >>
> >> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com> wrote:
> >>
> >>> Do we have one? If so, any link to setup and download it? I don't use
> Maven
> >>> just FYI.
> >>>
> >>> Thanks.
> >>>
> >>> --
> >>> View this message in context:
> >>>
> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
> >>> Sent from the Tapestry - User mailing list archive at Nabble.com.
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >>> For additional commands, e-mail: users-help@tapestry.apache.org
> >>>
> >>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
Re: fckeditor for Tapestry 5.3
Posted by Kalle Korhonen <ka...@gmail.com>.
Ah well, partly a user error. If you have the component (mixin)
wrapped in a zone, you'll get multiple instances of CKEditor with
plenty of interesting effects. It does make sense not to re-initialize
it during ajax updates but wasn't ready to spend enough time to find
the appropriate place to add safeguards to prevent multiple instances
within the same zone. Sent a pull request anyway for a minor clean-up
while I was working on it.
Kalle
On Thu, Feb 16, 2012 at 4:52 PM, Kalle Korhonen
<ka...@gmail.com> wrote:
> Hey Dusko, Dragan, can tapestry5-ckeditor be configured to work with
> ajax forms? I was hoping to use your component as part of a new
> project. I had hacked chenillekit's fckeditor a few years go to work
> with ajax and I imagine this might need similar type of treatment if
> it's not already supported.
>
> Kalle
>
>
> On Fri, Nov 11, 2011 at 10:16 AM, Dusko Jovanovski <du...@gmail.com> wrote:
>> You can try out our implementation:
>> https://github.com/plannowtech/tapestry5-ckeditor
>>
>> It's still not thoroughly tested, but should work fine.
>>
>> Any remarks/complaints/bugs should be reported on GitHub.
>>
>> --
>> Dusko Jovanovski
>>
>> On Fri, Nov 11, 2011 at 4:50 AM, TG <ta...@hotmail.com> wrote:
>>
>>> Do we have one? If so, any link to setup and download it? I don't use Maven
>>> just FYI.
>>>
>>> Thanks.
>>>
>>> --
>>> View this message in context:
>>> http://tapestry.1045711.n5.nabble.com/fckeditor-for-Tapestry-5-3-tp4983201p4983201.html
>>> Sent from the Tapestry - User mailing list archive at Nabble.com.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>>> For additional commands, e-mail: users-help@tapestry.apache.org
>>>
>>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org