You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@cloudstack.apache.org by pd...@apache.org on 2017/02/08 01:18:55 UTC
[42/63] [abbrv] cloudstack-docs-admin git commit: 50% des chaines
sont traduites en FR
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/remote_access_vpn.po
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/remote_access_vpn.po b/source/locale/fr/LC_MESSAGES/networking/remote_access_vpn.po
new file mode 100644
index 0000000..e41e107
--- /dev/null
+++ b/source/locale/fr/LC_MESSAGES/networking/remote_access_vpn.po
@@ -0,0 +1,1119 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration RTD\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2016-08-22 13:55+0200\n"
+"PO-Revision-Date: 2014-06-30 12:06+0000\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: French (http://www.transifex.com/ke4qqq/apache-cloudstack-"
+"administration-rtd/language/fr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: Babel 2.3.4\n"
+
+#: ../../networking/remote_access_vpn.rst:20
+msgid "Remote Access VPN"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:22
+msgid ""
+"CloudStack account owners can create virtual private networks (VPN) to "
+"access their virtual machines. If the guest network is instantiated from "
+"a network offering that offers the Remote Access VPN service, the virtual"
+" router (based on the System VM) is used to provide the service. "
+"CloudStack provides a L2TP-over-IPsec-based remote access VPN service to "
+"guest virtual networks. Since each network gets its own virtual router, "
+"VPNs are not shared across the networks. VPN clients native to `Windows, "
+"Mac OS X <networking/using_remote_access.html>`_ and iOS can be used to "
+"connect to the guest networks. The account owner can create and manage "
+"users for their VPN. CloudStack does not use its account database for "
+"this purpose but uses a separate table. The VPN user database is shared "
+"across all the VPNs created by the account owner. All VPN users get "
+"access to all VPNs created by the account owner."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:37
+msgid ""
+"Make sure that not all traffic goes through the VPN. That is, the route "
+"installed by the VPN should be only for the guest network and not for all"
+" traffic."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:41
+msgid ""
+"**Road Warrior / Remote Access**. Users want to be able to connect "
+"securely from a home or office to a private network in the cloud. "
+"Typically, the IP address of the connecting client is dynamic and cannot "
+"be preconfigured on the VPN server."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:46
+msgid ""
+"**Site to Site**. In this scenario, two private subnets are connected "
+"over the public Internet with a secure VPN tunnel. The cloud user's "
+"subnet (for example, an office network) is connected through a gateway to"
+" the network in the cloud. The address of the user's gateway must be "
+"preconfigured on the VPN server in the cloud. Note that although L2TP-"
+"over-IPsec can be used to set up Site-to-Site VPNs, this is not the "
+"primary intent of this feature. For more information, see \":ref"
+":`setting-s2s-vpn-conn`\"."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:57
+msgid "Configuring Remote Access VPN"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:59
+msgid "To set up VPN for the cloud:"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:61
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:63
+msgid "In the left navigation, click Global Settings."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:65
+msgid "Set the following global configuration parameters."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:67
+msgid ""
+"remote.access.vpn.client.ip.range - The range of IP addresses to be "
+"allocated to remote access VPN clients. The first IP in the range is used"
+" by the VPN server."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:71
+msgid "remote.access.vpn.psk.length - Length of the IPSec key."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:73
+msgid "remote.access.vpn.user.limit - Maximum number of VPN users per account."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:76
+msgid "To enable VPN for a particular network:"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:78
+#: ../../networking/remote_access_vpn.rst:103
+msgid "Log in as a user or administrator to the CloudStack UI."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:80
+#: ../../networking/remote_access_vpn.rst:105
+msgid "In the left navigation, click Network."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:82
+msgid "Click the name of the network you want to work with."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:84
+msgid "Click View IP Addresses."
+msgstr "Cliquez sur Voir les adresses IP."
+
+#: ../../networking/remote_access_vpn.rst:86
+msgid "Click one of the displayed IP address names."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:88
+#: ../../networking/remote_access_vpn.rst:142
+msgid "Click the Enable VPN button. |vpn-icon.png|"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:90
+msgid "The IPsec key is displayed in a popup window."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:94
+msgid "Configuring Remote Access VPN in VPC"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:96
+msgid ""
+"On enabling Remote Access VPN on a VPC, any VPN client present outside "
+"the VPC can access VMs present in the VPC by using the Remote VPN "
+"connection. The VPN client can be present anywhere except inside the VPC "
+"on which the user enabled the Remote Access VPN service."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:101
+msgid "To enable VPN for a VPC:"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:107
+msgid "In the Select view, select VPC."
+msgstr "Dans la vue de S�lection, choisissez VPC."
+
+#: ../../networking/remote_access_vpn.rst:109
+msgid "All the VPCs that you have created for the account is listed in the page."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:112
+msgid "Click the Configure button of the VPC."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:114
+msgid "For each tier, the following options are displayed:"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:116
+msgid "Internal LB"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:118
+msgid "Public LB IP"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:120
+msgid "Static NAT"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:122
+msgid "Virtual Machines"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:124
+msgid "CIDR"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:126
+msgid "The following router information is displayed:"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:128
+msgid "Private Gateways"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:130
+msgid "Public IP Addresses"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:132
+msgid "Site-to-Site VPNs"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:134
+msgid "Network ACL Lists"
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:136
+msgid "In the Router node, select Public IP Addresses."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:138
+msgid "The IP Addresses page is displayed."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:140
+msgid "Click Source NAT IP address."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:144
+msgid "Click OK to confirm. The IPsec key is displayed in a pop-up window."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:146
+msgid "Now, you need to add the VPN users."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:148
+msgid "Click the Source NAT IP."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:150
+msgid "Select the VPN tab."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:152
+msgid ""
+"Add the username and the corresponding password of the user you wanted to"
+" add."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:155
+msgid "Click Add."
+msgstr ""
+
+#: ../../networking/remote_access_vpn.rst:157
+msgid "Repeat the same steps to add the VPN users."
+msgstr ""
+
+# 8202b8f150584992995c6c6f69a2c907
+#~ msgid ""
+#~ "CloudStack account owners can create "
+#~ "virtual private networks (VPN) to access"
+#~ " their virtual machines. If the guest"
+#~ " network is instantiated from a "
+#~ "network offering that offers the Remote"
+#~ " Access VPN service, the virtual "
+#~ "router (based on the System VM) is"
+#~ " used to provide the service. "
+#~ "CloudStack provides a L2TP-over-"
+#~ "IPsec-based remote access VPN service "
+#~ "to guest virtual networks. Since each"
+#~ " network gets its own virtual router,"
+#~ " VPNs are not shared across the "
+#~ "networks. VPN clients native to Windows,"
+#~ " Mac OS X and iOS can be "
+#~ "used to connect to the guest "
+#~ "networks. The account owner can create"
+#~ " and manage users for their VPN. "
+#~ "CloudStack does not use its account "
+#~ "database for this purpose but uses "
+#~ "a separate table. The VPN user "
+#~ "database is shared across all the "
+#~ "VPNs created by the account owner. "
+#~ "All VPN users get access to all"
+#~ " VPNs created by the account owner."
+#~ msgstr ""
+
+# d3c8df533b2c4e659158e77c8669a813
+#~ msgid "Using Remote Access VPN with Windows"
+#~ msgstr ""
+
+# d03485e36a8744758782e81ab88041d1
+#~ msgid ""
+#~ "The procedure to use VPN varies by"
+#~ " Windows version. Generally, the user "
+#~ "must edit the VPN properties and "
+#~ "make sure that the default route "
+#~ "is not the VPN. The following "
+#~ "steps are for Windows L2TP clients "
+#~ "on Windows Vista. The commands should"
+#~ " be similar for other Windows "
+#~ "versions."
+#~ msgstr ""
+
+# 98196e5429de407da75adf5f3ce7cf8d
+#~ msgid ""
+#~ "Log in to the CloudStack UI and"
+#~ " click on the source NAT IP for"
+#~ " the account. The VPN tab should "
+#~ "display the IPsec preshared key. Make"
+#~ " a note of this and the source"
+#~ " NAT IP. The UI also lists one"
+#~ " or more users and their passwords."
+#~ " Choose one of these users, or, "
+#~ "if none exists, add a user and "
+#~ "password."
+#~ msgstr ""
+
+# 6a896fa8431d479195d161efebf56672
+#~ msgid ""
+#~ "On the Windows box, go to Control"
+#~ " Panel, then select Network and "
+#~ "Sharing center. Click Setup a connection"
+#~ " or network."
+#~ msgstr ""
+
+# 8e983aa928b444228e689749e8fc0801
+#~ msgid "In the next dialog, select No, create a new connection."
+#~ msgstr ""
+
+# 98f484c7652c45d2ae57690d719610ed
+#~ msgid "In the next dialog, select Use my Internet Connection (VPN)."
+#~ msgstr ""
+
+# 784c5c041ba94caea475a667add0adcd
+#~ msgid ""
+#~ "In the next dialog, enter the "
+#~ "source NAT IP from step #1 and "
+#~ "give the connection a name. Check "
+#~ "Don't connect now."
+#~ msgstr ""
+
+# 41d1540c0a7d401a9c549bd5304f18ce
+#~ msgid ""
+#~ "In the next dialog, enter the user"
+#~ " name and password selected in step"
+#~ " #1."
+#~ msgstr ""
+
+# 3cbbd674fd8d412c90bfbbeb8f607ea0
+#~ msgid "Click Create."
+#~ msgstr "Cliquez sur Cr�er"
+
+# 85a9ef6f201e47f584255229980b3d87
+#~ msgid ""
+#~ "Go back to the Control Panel and"
+#~ " click Network Connections to see the"
+#~ " new connection. The connection is "
+#~ "not active yet."
+#~ msgstr ""
+
+# 1d169d66dd744654bd8ea7dd62a677a6
+#~ msgid ""
+#~ "Right-click the new connection and "
+#~ "select Properties. In the Properties "
+#~ "dialog, select the Networking tab."
+#~ msgstr ""
+
+# a191730de1684f06a3d729e5cde2e487
+#~ msgid ""
+#~ "In Type of VPN, choose L2TP IPsec"
+#~ " VPN, then click IPsec settings. "
+#~ "Select Use preshared key. Enter the "
+#~ "preshared key from step #1."
+#~ msgstr ""
+
+# 343858b6c3e5498fad0bd34b503e792d
+#~ msgid ""
+#~ "The connection is ready for activation."
+#~ " Go back to Control Panel -> "
+#~ "Network Connections and double-click the"
+#~ " created connection."
+#~ msgstr ""
+
+# e60c05ee4aef40d38a3a0b01aade9b5e
+#~ msgid "Enter the user name and password from step #1."
+#~ msgstr ""
+
+# d1cfefca174a4554a0c4170ec0c49f9b
+#~ msgid "Using Remote Access VPN with Mac OS X"
+#~ msgstr ""
+
+# 728cc61e43c440459c1ad6252a2f6b97
+#~ msgid ""
+#~ "First, be sure you've configured the "
+#~ "VPN settings in your CloudStack install."
+#~ " This section is only concerned with"
+#~ " connecting via Mac OS X to "
+#~ "your VPN."
+#~ msgstr ""
+
+# b3185af9f4534991ad3e3e5b66f47da2
+#~ msgid ""
+#~ "Note, these instructions were written on"
+#~ " Mac OS X 10.7.5. They may "
+#~ "differ slightly in older or newer "
+#~ "releases of Mac OS X."
+#~ msgstr ""
+
+# 6f2aaf1e33d6421db0f521c5820d02c8
+#~ msgid "On your Mac, open System Preferences and click Network."
+#~ msgstr ""
+
+# 26e7088ea9494f94922f1a8f5e0ad753
+#~ msgid "Make sure Send all traffic over VPN connection is not checked."
+#~ msgstr ""
+
+# 8e0600ca2c9546a2b3905659b64a835b
+#~ msgid ""
+#~ "If your preferences are locked, you'll"
+#~ " need to click the lock in the"
+#~ " bottom left-hand corner to make "
+#~ "any changes and provide your "
+#~ "administrator credentials."
+#~ msgstr ""
+
+# da1ba33a066b4415a728d14ab936780c
+#~ msgid ""
+#~ "You will need to create a new "
+#~ "network entry. Click the plus icon "
+#~ "on the bottom left-hand side and"
+#~ " you'll see a dialog that says "
+#~ "\"Select the interface and enter a "
+#~ "name for the new service.\" Select "
+#~ "VPN from the Interface drop-down "
+#~ "menu, and \"L2TP over IPSec\" for "
+#~ "the VPN Type. Enter whatever you "
+#~ "like within the \"Service Name\" field."
+#~ msgstr ""
+
+# b96bb5f3c9534d3384752b6c652405b5
+#~ msgid ""
+#~ "You'll now have a new network "
+#~ "interface with the name of whatever "
+#~ "you put in the \"Service Name\" "
+#~ "field. For the purposes of this "
+#~ "example, we'll assume you've named it"
+#~ " \"CloudStack.\" Click on that interface"
+#~ " and provide the IP address of "
+#~ "the interface for your VPN under "
+#~ "the Server Address field, and the "
+#~ "user name for your VPN under "
+#~ "Account Name."
+#~ msgstr ""
+
+# db5b3b2b72e449368be600488d32a212
+#~ msgid ""
+#~ "Click Authentication Settings, and add "
+#~ "the user's password under User "
+#~ "Authentication and enter the pre-shared"
+#~ " IPSec key in the Shared Secret "
+#~ "field under Machine Authentication. Click "
+#~ "OK."
+#~ msgstr ""
+
+# 79ff11baad9844c9a7bb84f19aac4703
+#~ msgid ""
+#~ "You may also want to click the "
+#~ "\"Show VPN status in menu bar\" "
+#~ "but that's entirely optional."
+#~ msgstr ""
+
+# 74b926642e7d49ca925804a4d6d99abc
+#~ msgid "Now click \"Connect\" and you will be connected to the CloudStack VPN."
+#~ msgstr ""
+
+# fb0aef197790435d95971b0006f98a9d
+#~ msgid "Setting Up a Site-to-Site VPN Connection"
+#~ msgstr ""
+
+# b113a5a8546b4ce8b1a7507f2b860ad7
+#~ msgid ""
+#~ "A Site-to-Site VPN connection "
+#~ "helps you establish a secure connection"
+#~ " from an enterprise datacenter to the"
+#~ " cloud infrastructure. This allows users"
+#~ " to access the guest VMs by "
+#~ "establishing a VPN connection to the "
+#~ "virtual router of the account from "
+#~ "a device in the datacenter of the"
+#~ " enterprise. You can also establish a"
+#~ " secure connection between two VPC "
+#~ "setups or high availability zones in "
+#~ "your environment. Having this facility "
+#~ "eliminates the need to establish VPN "
+#~ "connections to individual VMs."
+#~ msgstr ""
+
+# ec0ce935716740158c031ebf544b7294
+#~ msgid ""
+#~ "The difference from Remote VPN is "
+#~ "that Site-to-site VPNs connects "
+#~ "entire networks to each other, for "
+#~ "example, connecting a branch office "
+#~ "network to a company headquarters "
+#~ "network. In a site-to-site VPN,"
+#~ " hosts do not have VPN client "
+#~ "software; they send and receive normal"
+#~ " TCP/IP traffic through a VPN "
+#~ "gateway."
+#~ msgstr ""
+
+# 79120b77963b4f77afa51573e6ad1ca7
+#~ msgid "The supported endpoints on the remote datacenters are:"
+#~ msgstr ""
+
+# 34aba4dd56884ad3871e85272aab2acf
+#~ msgid "Cisco ISR with IOS 12.4 or later"
+#~ msgstr ""
+
+# 95978dcfdbf34c2886952ee16cb6e16d
+#~ msgid "Juniper J-Series routers with JunOS 9.5 or later"
+#~ msgstr ""
+
+# 272a2a827c494e90a6b2d52dc96b7f0b
+#~ msgid "CloudStack virtual routers"
+#~ msgstr ""
+
+# 8c16297c0eab4c72b6a2a29b0f4866d1
+#~ msgid ""
+#~ "In addition to the specific Cisco "
+#~ "and Juniper devices listed above, the"
+#~ " expectation is that any Cisco or "
+#~ "Juniper device running on the supported"
+#~ " operating systems are able to "
+#~ "establish VPN connections."
+#~ msgstr ""
+
+# eb701cb20d40405b9ca1d79ce15b681f
+#~ msgid "To set up a Site-to-Site VPN connection, perform the following:"
+#~ msgstr ""
+
+# b5f397a7a64b47168a74fb1618810e5c
+#~ msgid "Create a Virtual Private Cloud (VPC)."
+#~ msgstr ""
+
+# 1d44be641cf042b99841b146bb055956
+#~ msgid "See \":ref:`configuring-vpc`\"."
+#~ msgstr ""
+
+# f1ff67e23d7d4eaeb81c1b5686399942
+#~ msgid "Create a VPN Customer Gateway."
+#~ msgstr ""
+
+# e3425171b9504f5b958d0802ca1a55ce
+#~ msgid "Create a VPN gateway for the VPC that you created."
+#~ msgstr ""
+
+# 6d0964544a6944f39ec8eafdaf587428
+#~ msgid ""
+#~ "Create VPN connection from the VPC "
+#~ "VPN gateway to the customer VPN "
+#~ "gateway."
+#~ msgstr ""
+
+# 3d85874020904fbdb261885b5e2f05ce
+#~ msgid "Creating and Updating a VPN Customer Gateway"
+#~ msgstr ""
+
+# 9b0857af13544aaebee5984422c93195
+#~ msgid ""
+#~ "A VPN customer gateway can be "
+#~ "connected to only one VPN gateway "
+#~ "at a time."
+#~ msgstr ""
+
+# 1a951a0ee8d54164b9b99ff9cd080e58
+#~ msgid "To add a VPN Customer Gateway:"
+#~ msgstr ""
+
+# 6a26e636eb224d1eb75c9782de7c830d
+# affc98b5cd4b401086e5e00f9e69ac90
+# 23c81aa674f64826830390c49839730c
+# 98dc2f6f69d341b0b1867f35102e20ff
+# d4efd83e728b439eaa8408bd783d0c11
+#~ msgid "In the left navigation, choose Network."
+#~ msgstr "Dans la navigation � gauche, choisissez R�seau."
+
+# b0e99af0f0014e1aa156dd7f2644f23a
+# cf4e8a6aa8be4c3e9c92bd5f84e9b571
+#~ msgid "In the Select view, select VPN Customer Gateway."
+#~ msgstr ""
+
+# 51d8e12e75dd47e4b2d4a9c52da89be9
+#~ msgid "Click Add VPN Customer Gateway."
+#~ msgstr ""
+
+# e72b7822c85649f99f01e845e1418844
+#~ msgid "|addvpncustomergateway.png|"
+#~ msgstr ""
+
+# 0810d2cb133043b4858badbc2e4ac704
+#~ msgid "Provide the following information:"
+#~ msgstr ""
+
+# 372ec8983a514ad3b0927d01bc30fae6
+#~ msgid "**Name**: A unique name for the VPN customer gateway you create."
+#~ msgstr ""
+
+# 0cd283ba65a241cf97d90b2c5f04c36f
+#~ msgid "**Gateway**: The IP address for the remote gateway."
+#~ msgstr ""
+
+# 0e3f2efe75f7454e9f2ac706604f832d
+#~ msgid ""
+#~ "**CIDR list**: The guest CIDR list "
+#~ "of the remote subnets. Enter a "
+#~ "CIDR or a comma-separated list of"
+#~ " CIDRs. Ensure that a guest CIDR "
+#~ "list is not overlapped with the "
+#~ "VPC's CIDR, or another guest CIDR. "
+#~ "The CIDR must be RFC1918-compliant."
+#~ msgstr ""
+
+# 929c5f444fae4aee88faa98a926d0f52
+#~ msgid ""
+#~ "**IPsec Preshared Key**: Preshared keying "
+#~ "is a method where the endpoints of"
+#~ " the VPN share a secret key. "
+#~ "This key value is used to "
+#~ "authenticate the customer gateway and "
+#~ "the VPC VPN gateway to each other."
+#~ msgstr ""
+
+# 171abb6f27ef471eae87fd0718d714af
+#~ msgid ""
+#~ "The IKE peers (VPN end points) "
+#~ "authenticate each other by computing and"
+#~ " sending a keyed hash of data "
+#~ "that includes the Preshared key. If "
+#~ "the receiving peer is able to "
+#~ "create the same hash independently by"
+#~ " using its Preshared key, it knows"
+#~ " that both peers must share the "
+#~ "same secret, thus authenticating the "
+#~ "customer gateway."
+#~ msgstr ""
+
+# a4553b53ccb04b358a278545e87eb9bd
+#~ msgid ""
+#~ "**IKE Encryption**: The Internet Key "
+#~ "Exchange (IKE) policy for phase-1. The"
+#~ " supported encryption algorithms are "
+#~ "AES128, AES192, AES256, and 3DES. "
+#~ "Authentication is accomplished through the "
+#~ "Preshared Keys."
+#~ msgstr ""
+
+# 3bb40218a4db49e0aa09d5983d57a8fa
+#~ msgid ""
+#~ "The phase-1 is the first phase in"
+#~ " the IKE process. In this initial "
+#~ "negotiation phase, the two VPN endpoints"
+#~ " agree on the methods to be "
+#~ "used to provide security for the "
+#~ "underlying IP traffic. The phase-1 "
+#~ "authenticates the two VPN gateways to"
+#~ " each other, by confirming that the"
+#~ " remote gateway has a matching "
+#~ "Preshared Key."
+#~ msgstr ""
+
+# a5e3619f28fb487987386ff3359d079b
+#~ msgid ""
+#~ "**IKE Hash**: The IKE hash for "
+#~ "phase-1. The supported hash algorithms "
+#~ "are SHA1 and MD5."
+#~ msgstr ""
+
+# 998f798e068147c69b96d5332181acdd
+#~ msgid ""
+#~ "**IKE DH**: A public-key cryptography"
+#~ " protocol which allows two parties to"
+#~ " establish a shared secret over an"
+#~ " insecure communications channel. The "
+#~ "1536-bit Diffie-Hellman group is used"
+#~ " within IKE to establish session "
+#~ "keys. The supported options are None,"
+#~ " Group-5 (1536-bit) and Group-2 (1024-bit)."
+#~ msgstr ""
+
+# 34c98169c2dd4375a23dff45d764590d
+#~ msgid ""
+#~ "**ESP Encryption**: Encapsulating Security "
+#~ "Payload (ESP) algorithm within phase-2. "
+#~ "The supported encryption algorithms are "
+#~ "AES128, AES192, AES256, and 3DES."
+#~ msgstr ""
+
+# c61b40cf82de4f9fb6c45b8e0172b4b4
+#~ msgid ""
+#~ "The phase-2 is the second phase in"
+#~ " the IKE process. The purpose of "
+#~ "IKE phase-2 is to negotiate IPSec "
+#~ "security associations (SA) to set up "
+#~ "the IPSec tunnel. In phase-2, new "
+#~ "keying material is extracted from the"
+#~ " Diffie-Hellman key exchange in "
+#~ "phase-1, to provide session keys to "
+#~ "use in protecting the VPN data "
+#~ "flow."
+#~ msgstr ""
+
+# 71d47a66a42f4a04b2540e69eba4cdd9
+#~ msgid ""
+#~ "**ESP Hash**: Encapsulating Security Payload"
+#~ " (ESP) hash for phase-2. Supported "
+#~ "hash algorithms are SHA1 and MD5."
+#~ msgstr ""
+
+# 2378eab3a19b42cda0e954ae2c70bb38
+#~ msgid ""
+#~ "**Perfect Forward Secrecy**: Perfect Forward"
+#~ " Secrecy (or PFS) is the property "
+#~ "that ensures that a session key "
+#~ "derived from a set of long-term"
+#~ " public and private keys will not "
+#~ "be compromised. This property enforces a"
+#~ " new Diffie-Hellman key exchange. It"
+#~ " provides the keying material that "
+#~ "has greater key material life and "
+#~ "thereby greater resistance to cryptographic"
+#~ " attacks. The available options are "
+#~ "None, Group-5 (1536-bit) and Group-2 "
+#~ "(1024-bit). The security of the key "
+#~ "exchanges increase as the DH groups "
+#~ "grow larger, as does the time of"
+#~ " the exchanges."
+#~ msgstr ""
+
+# de12259eb62f48c294bc324395468d43
+#~ msgid ""
+#~ "When PFS is turned on, for every"
+#~ " negotiation of a new phase-2 SA "
+#~ "the two gateways must generate a "
+#~ "new set of phase-1 keys. This adds"
+#~ " an extra layer of protection that"
+#~ " PFS adds, which ensures if the "
+#~ "phase-2 SA's have expired, the keys "
+#~ "used for new phase-2 SA's have not"
+#~ " been generated from the current "
+#~ "phase-1 keying material."
+#~ msgstr ""
+
+# c29472e88000476ea8eb3f3165f58da4
+#~ msgid ""
+#~ "**IKE Lifetime (seconds)**: The phase-1 "
+#~ "lifetime of the security association in"
+#~ " seconds. Default is 86400 seconds (1"
+#~ " day). Whenever the time expires, a"
+#~ " new phase-1 exchange is performed."
+#~ msgstr ""
+
+# c05a91d5e2b44d7a9ea842e762a6f4a0
+#~ msgid ""
+#~ "**ESP Lifetime (seconds)**: The phase-2 "
+#~ "lifetime of the security association in"
+#~ " seconds. Default is 3600 seconds (1"
+#~ " hour). Whenever the value is "
+#~ "exceeded, a re-key is initiated to"
+#~ " provide a new IPsec encryption and"
+#~ " authentication session keys."
+#~ msgstr ""
+
+# 9afba73f17a3471faa8cff978bb64495
+#~ msgid ""
+#~ "**Dead Peer Detection**: A method to "
+#~ "detect an unavailable Internet Key "
+#~ "Exchange (IKE) peer. Select this option"
+#~ " if you want the virtual router "
+#~ "to query the liveliness of its IKE"
+#~ " peer at regular intervals. It's "
+#~ "recommended to have the same "
+#~ "configuration of DPD on both side "
+#~ "of VPN connection."
+#~ msgstr ""
+
+# 4d12f59b777c48e98fb18ab2bace355d
+# a65f0ba427b04b6da2bdc39a05acba02
+#~ msgid "Click OK."
+#~ msgstr "Cliquez sur OK."
+
+# 460983ec4dd64370b650944e21d45b75
+#~ msgid "Updating and Removing a VPN Customer Gateway"
+#~ msgstr ""
+
+# 47640086ca6e4122a862027f6e528af6
+#~ msgid ""
+#~ "You can update a customer gateway "
+#~ "either with no VPN connection, or "
+#~ "related VPN connection is in error "
+#~ "state."
+#~ msgstr ""
+
+# eee4a55897da4f06b44795327c878110
+#~ msgid "Select the VPN customer gateway you want to work with."
+#~ msgstr ""
+
+# 9dc617447a9c48df92819b996a8e3b39
+#~ msgid ""
+#~ "To modify the required parameters, click"
+#~ " the Edit VPN Customer Gateway button"
+#~ " |vpn-edit-icon.png|"
+#~ msgstr ""
+
+# 0c3c4beedfb2453cb03958649454d3d2
+#~ msgid ""
+#~ "To remove the VPN customer gateway, "
+#~ "click the Delete VPN Customer Gateway"
+#~ " button |delete.png|"
+#~ msgstr ""
+
+# ae45fd8564384b9a8682a662011196da
+#~ msgid "Creating a VPN gateway for the VPC"
+#~ msgstr ""
+
+# addf23d2b2b14d9c80370bc70f64ec94
+# 8ab2d3e53e83433ab4cf699e916d89d9
+# 5ece94a59df34ecdb036ac45fc49bd06
+#~ msgid ""
+#~ "Click the Configure button of the "
+#~ "VPC to which you want to deploy"
+#~ " the VMs."
+#~ msgstr ""
+
+# af1a9268a6da4a45922589c847776234
+# 1ccf3bf911414951aeb77508e82aa992
+# 433faedb39a3413c8ce1f220f5e22560
+#~ msgid ""
+#~ "The VPC page is displayed where "
+#~ "all the tiers you created are "
+#~ "listed in a diagram."
+#~ msgstr ""
+
+# 3152bcd237704f96b4a1b897b801f81b
+# 5a72231d602e4625acd0cbd4b0af4f7e
+# 243047505a8c40e1aadfa9dfbc091f0c
+#~ msgid "Select Site-to-Site VPN."
+#~ msgstr ""
+
+# 626b08a7444c4baeb387b316fcf8921d
+#~ msgid ""
+#~ "If you are creating the VPN "
+#~ "gateway for the first time, selecting"
+#~ " Site-to-Site VPN prompts you "
+#~ "to create a VPN gateway."
+#~ msgstr ""
+
+# c46b3f642ec240738664d6765c1d736f
+#~ msgid "In the confirmation dialog, click Yes to confirm."
+#~ msgstr ""
+
+# 6dbf5c6dc5984bc896785e8d81f1fa0d
+#~ msgid ""
+#~ "Within a few moments, the VPN "
+#~ "gateway is created. You will be "
+#~ "prompted to view the details of "
+#~ "the VPN gateway you have created. "
+#~ "Click Yes to confirm."
+#~ msgstr ""
+
+# 62c9ff637a9c46beb4a187d9d333e711
+#~ msgid "The following details are displayed in the VPN Gateway page:"
+#~ msgstr ""
+
+# 202a6b9a51f3470d89bb84bb2c9579a8
+# 47435eb81ccf40eab149e9b0abb9213e
+#~ msgid "IP Address"
+#~ msgstr ""
+
+# 46f2ea07f3744ac381add8029488f5d3
+#~ msgid "Account"
+#~ msgstr ""
+
+# bad02846a1ee4160a278abb51303de1f
+#~ msgid "Domain"
+#~ msgstr ""
+
+# b0b08d6daddb48409f581811786b76cf
+#~ msgid "Creating a VPN Connection"
+#~ msgstr ""
+
+# 596c1d39f0fe47fa8b05ff9b321ae507
+#~ msgid "CloudStack supports creating up to 8 VPN connections."
+#~ msgstr ""
+
+# a61e029b8b514adfa93c97620ffff95f
+#~ msgid "All the VPCs that you create for the account are listed in the page."
+#~ msgstr ""
+
+# 690702b545754083adec40f20d69acb4
+# 614430ff17c8485fae7ddb094273ef06
+#~ msgid "Click the Settings icon."
+#~ msgstr ""
+
+# 86dbf74b2c6e4f0aab3f252fafd89f2c
+# fab72af09a284fd2800ff51645f071bf
+#~ msgid "The Site-to-Site VPN page is displayed."
+#~ msgstr ""
+
+# db4dc2719dd6405eb250f62908eef010
+# 207bfc2acd9e434887770513a245873b
+#~ msgid "From the Select View drop-down, ensure that VPN Connection is selected."
+#~ msgstr ""
+
+# 950eac49657f4a29a9fba1b973577867
+#~ msgid "Click Create VPN Connection."
+#~ msgstr ""
+
+# 916fc10dd39346ada9828e3a2a80ffda
+#~ msgid "The Create VPN Connection dialog is displayed:"
+#~ msgstr ""
+
+# 87888fff4a5f4664be5c4c03fc2ecf6a
+#~ msgid "|createvpnconnection.png|"
+#~ msgstr ""
+
+# 4b6cc407b8bc4a728fb3328f0ce53f3f
+#~ msgid "Select the desired customer gateway."
+#~ msgstr ""
+
+# 6776ab8d9fad4c2d8956d78ff11ab998
+#~ msgid ""
+#~ "Select Passive if you want to "
+#~ "establish a connection between two VPC"
+#~ " virtual routers."
+#~ msgstr ""
+
+# 513eee2d7f8745a4b338c8ea142fae05
+#~ msgid ""
+#~ "If you want to establish a "
+#~ "connection between two VPC virtual "
+#~ "routers, select Passive only on one "
+#~ "of the VPC virtual routers, which "
+#~ "waits for the other VPC virtual "
+#~ "router to initiate the connection. Do"
+#~ " not select Passive on the VPC "
+#~ "virtual router that initiates the "
+#~ "connection."
+#~ msgstr ""
+
+# dd03407d4f064ec99ea68bb066d2289e
+#~ msgid "Click OK to confirm."
+#~ msgstr ""
+
+# d4c274e9cecb44bcad1ba67ed65069e4
+#~ msgid "Within a few moments, the VPN Connection is displayed."
+#~ msgstr ""
+
+# 42dd7918225d458f980e458924b262f3
+#~ msgid "The following information on the VPN connection is displayed:"
+#~ msgstr ""
+
+# 64fdbdcdfac148dea0883db2615bf0ed
+#~ msgid "Gateway"
+#~ msgstr ""
+
+# 8ac547f2f1574131adc8c69d4e3c30ef
+#~ msgid "State"
+#~ msgstr ""
+
+# d2a5bd51a6e347e89857750706114fc9
+#~ msgid "IPSec Preshared Key"
+#~ msgstr ""
+
+# ccfea0cb9ae34777990aa348b7a9c23f
+#~ msgid "IKE Policy"
+#~ msgstr ""
+
+# bc29ecfda06848f78a8cc694b3f6d47b
+#~ msgid "ESP Policy"
+#~ msgstr ""
+
+# 57cee5dc2eed4f6a9164c4838ebdc9d6
+#~ msgid "Site-to-Site VPN Connection Between VPC Networks"
+#~ msgstr ""
+
+# d8f9f929fafd40e6895122549b022754
+#~ msgid ""
+#~ "CloudStack provides you with the ability"
+#~ " to establish a site-to-site "
+#~ "VPN connection between CloudStack virtual "
+#~ "routers. To achieve that, add a "
+#~ "passive mode Site-to-Site VPN. "
+#~ "With this functionality, users can "
+#~ "deploy applications in multiple Availability"
+#~ " Zones or VPCs, which can communicate"
+#~ " with each other by using a "
+#~ "secure Site-to-Site VPN Tunnel."
+#~ msgstr ""
+
+# 2fb087843cd04fafa3beba95a3ae2af1
+#~ msgid "This feature is supported on all the hypervisors."
+#~ msgstr ""
+
+# 217a4da322cc4f8caa7e04c029779c8b
+#~ msgid "Create two VPCs. For example, VPC A and VPC B."
+#~ msgstr ""
+
+# a78d89e3621346c8a11277927e8dc502
+#~ msgid "For more information, see \":ref:`configuring-vpc`\"."
+#~ msgstr ""
+
+# 09b752dc4d4e4cd29912fcbe352309fa
+#~ msgid "Create VPN gateways on both the VPCs you created."
+#~ msgstr ""
+
+# b9af87b346ef40889104b5a1f40c7702
+#~ msgid ""
+#~ "For more information, see `\"Creating a"
+#~ " VPN gateway for the VPC\" "
+#~ "<#creating-a-vpn-gateway-for-the-vpc>`_."
+#~ msgstr ""
+
+# 29d8db01114c458e8d855996c22e0664
+#~ msgid "Create VPN customer gateway for both the VPCs."
+#~ msgstr ""
+
+# 1a50b7ef681f4cb48c15d30e08dfd1e7
+#~ msgid ""
+#~ "For more information, see `\"Creating "
+#~ "and Updating a VPN Customer Gateway\""
+#~ " <#creating-and-updating-a-vpn-customer-"
+#~ "gateway>`_."
+#~ msgstr ""
+
+# c9013d4ec4c74444a40bf745ae0a5544
+#~ msgid "Enable a VPN connection on VPC A in passive mode."
+#~ msgstr ""
+
+# 8fb700491eeb4156a1c7549d81a78346
+#~ msgid ""
+#~ "For more information, see `\"Creating a"
+#~ " VPN Connection\" <#creating-a-vpn-connection>`_."
+#~ msgstr ""
+
+# e8dd1dd51dd34f57ac10161220734be4
+#~ msgid ""
+#~ "Ensure that the customer gateway is "
+#~ "pointed to VPC B. The VPN "
+#~ "connection is shown in the Disconnected"
+#~ " state."
+#~ msgstr ""
+
+# eca76af9d9304b17982a0bb977a12547
+#~ msgid "Enable a VPN connection on VPC B."
+#~ msgstr ""
+
+# 79e9417cc7294b70bd95236d9c2c80ac
+#~ msgid ""
+#~ "Ensure that the customer gateway is "
+#~ "pointed to VPC A. Because virtual "
+#~ "router of VPC A, in this case, "
+#~ "is in passive mode and is waiting"
+#~ " for the virtual router of VPC "
+#~ "B to initiate the connection, VPC "
+#~ "B virtual router should not be in"
+#~ " passive mode."
+#~ msgstr ""
+
+# cf0657024acb43ea8028262bf74a9848
+#~ msgid "The VPN connection is shown in the Disconnected state."
+#~ msgstr ""
+
+# 4c18218889914f65b2fe355d4568b407
+#~ msgid ""
+#~ "Creating VPN connection on both the "
+#~ "VPCs initiates a VPN connection. Wait"
+#~ " for few seconds. The default is "
+#~ "30 seconds for both the VPN "
+#~ "connections to show the Connected state."
+#~ msgstr ""
+
+# 84118e99c0b14f49b14160c3975dad17
+#~ msgid "Restarting and Removing a VPN Connection"
+#~ msgstr ""
+
+# 090940869ab44e80b8e9c4ea04fa48ec
+#~ msgid "All the VPN connections you created are displayed."
+#~ msgstr ""
+
+# b921e72e9ca74e75b9c515a87f105b9a
+#~ msgid "Select the VPN connection you want to work with."
+#~ msgstr ""
+
+# 2387d86e243f469f84a0cee989324610
+#~ msgid "The Details tab is displayed."
+#~ msgstr ""
+
+# 345c5bfe23d84fd09f56e0e34de09e29
+#~ msgid ""
+#~ "To remove a VPN connection, click "
+#~ "the Delete VPN connection button "
+#~ "|remove-vpn.png|"
+#~ msgstr ""
+
+# 8d1a3cf378554f51a5702b0710c331f2
+#~ msgid ""
+#~ "To restart a VPN connection, click "
+#~ "the Reset VPN connection button present"
+#~ " in the Details tab. |reset-vpn.png|"
+#~ msgstr ""
+
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/security_groups.mo
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/security_groups.mo b/source/locale/fr/LC_MESSAGES/networking/security_groups.mo
new file mode 100644
index 0000000..c970783
Binary files /dev/null and b/source/locale/fr/LC_MESSAGES/networking/security_groups.mo differ
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/security_groups.po
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/security_groups.po b/source/locale/fr/LC_MESSAGES/networking/security_groups.po
new file mode 100644
index 0000000..da8b42d
--- /dev/null
+++ b/source/locale/fr/LC_MESSAGES/networking/security_groups.po
@@ -0,0 +1,402 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration RTD\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 12:52+0200\n"
+"PO-Revision-Date: 2016-12-21 10:23+0100\n"
+"Language-Team: French (http://www.transifex.com/ke4qqq/apache-cloudstack-"
+"administration-rtd/language/fr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: fr\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Last-Translator: \n"
+"X-Generator: Poedit 1.8.11\n"
+
+# b67087ae536e4b77ac5668f8f3f73ba8
+#: ../../networking/security_groups.rst:18
+msgid "Security Groups"
+msgstr "Groupes de s�curit�"
+
+# 1397d3fadf7d45779a890fb7156cf142
+#: ../../networking/security_groups.rst:21
+msgid "About Security Groups"
+msgstr "A propos des groupes de s�curit�"
+
+# 965e0935679141b0bc89e0d82dc1cff8
+#: ../../networking/security_groups.rst:23
+msgid ""
+"Security groups provide a way to isolate traffic to VMs. A security group "
+"is a group of VMs that filter their incoming and outgoing traffic according "
+"to a set of rules, called ingress and egress rules. These rules filter "
+"network traffic according to the IP address that is attempting to "
+"communicate with the VM. Security groups are particularly useful in zones "
+"that use basic networking, because there is a single guest network for all "
+"guest VMs. In advanced zones, security groups are supported only on the KVM "
+"hypervisor."
+msgstr ""
+
+# 7cc1c024596546c4837b5e09cef7f7db
+#: ../../networking/security_groups.rst:33
+msgid ""
+"In a zone that uses advanced networking, you can instead define multiple "
+"guest networks to isolate traffic to VMs."
+msgstr ""
+
+# bd8429af9a564cd398104231d1bfc2d9
+#: ../../networking/security_groups.rst:36
+msgid ""
+"Each CloudStack account comes with a default security group that denies all "
+"inbound traffic and allows all outbound traffic. The default security group "
+"can be modified so that all new VMs inherit some other desired set of rules."
+msgstr ""
+
+# 3eb3f0e93cf04d8a9c2a967e8ff3a11c
+#: ../../networking/security_groups.rst:41
+msgid ""
+"Any CloudStack user can set up any number of additional security groups. "
+"When a new VM is launched, it is assigned to the default security group "
+"unless another user-defined security group is specified. A VM can be a "
+"member of any number of security groups. Once a VM is assigned to a "
+"security group, it remains in that group for its entire lifetime; you can "
+"not move a running VM from one security group to another."
+msgstr ""
+
+# 1d91c7babdd54f38b62e9e65788a8a7c
+#: ../../networking/security_groups.rst:48
+msgid ""
+"You can modify a security group by deleting or adding any number of ingress "
+"and egress rules. When you do, the new rules apply to all VMs in the group, "
+"whether running or stopped."
+msgstr ""
+
+# f705f2a195b240f49ffc0cbe9aaa253a
+#: ../../networking/security_groups.rst:52
+msgid ""
+"If no ingress rules are specified, then no traffic will be allowed in, "
+"except for responses to any traffic that has been allowed out through an "
+"egress rule."
+msgstr ""
+
+# 7fa1798aea704a55b545171eb64a16bd
+#: ../../networking/security_groups.rst:58
+msgid "Adding a Security Group"
+msgstr "Ajouter un groupe de s�curit�"
+
+# f7cc763899ad4df99b9e927ef37eabb4
+#: ../../networking/security_groups.rst:60
+msgid "A user or administrator can define a new security group."
+msgstr ""
+"Un utilisateur ou un administrateur peut d�finir un nouveau groupe de "
+"s�curit�."
+
+# a026f1875e7f4cec8447b013bf2d7a78
+# 27e30ee65cbe485bb8e7370a38b75281
+#: ../../networking/security_groups.rst:62
+#: ../../networking/security_groups.rst:124
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+"Se connecter � l'interface de CloudStack comme administrateur ou "
+"utilisateur final."
+
+# 344ee6a79a674e88a4a61b24b0a01b42
+#: ../../networking/security_groups.rst:64
+msgid "In the left navigation, choose Network."
+msgstr "Dans la navigation � gauche, choisissez R�seau."
+
+# 07579af87ecd4f1d8bd6e66835cb2958
+#: ../../networking/security_groups.rst:66
+msgid "In Select view, choose Security Groups."
+msgstr "Dans la zone de s�lection, choisir Groupes de S�curit�."
+
+# 23507439460f427cb5be523f65e254fb
+#: ../../networking/security_groups.rst:68
+msgid "Click Add Security Group."
+msgstr "Cliquer sur Ajouter un groupe de s�curit�."
+
+# a530b7d59d194fb18081a92d396a272a
+#: ../../networking/security_groups.rst:70
+msgid "Provide a name and description."
+msgstr "Fournir un nom et une description."
+
+# 237fc184482448589b8a2eb7c3c70e76
+#: ../../networking/security_groups.rst:72
+msgid "Click OK."
+msgstr "Cliquez sur OK."
+
+# 34ea82240e9c456ab55ff2f0d5756566
+#: ../../networking/security_groups.rst:74
+msgid "The new security group appears in the Security Groups Details tab."
+msgstr ""
+"Le nouveau groupe de s�curit� appara�t dans l'onglet D�tails des Groupes de "
+"S�curit�."
+
+# df20adfc9c2e43b9b56c6f1119a9d73f
+#: ../../networking/security_groups.rst:76
+msgid ""
+"To make the security group useful, continue to Adding Ingress and Egress "
+"Rules to a Security Group."
+msgstr ""
+"Pour rendre le groupe de s�curit� utile, continuez par Ajouter des r�gles "
+"Ingress et Egress � un groupe de s�curit�."
+
+# 0a506fc7186b4a0c8a15ae463c4793e1
+#: ../../networking/security_groups.rst:81
+msgid "Security Groups in Advanced Zones (KVM Only)"
+msgstr "Groupes de s�curit� dans les Zones Avanc�es (KVM uniquement)"
+
+# b2a6fb8be2384189ae73c2430ce94159
+#: ../../networking/security_groups.rst:83
+msgid ""
+"CloudStack provides the ability to use security groups to provide isolation "
+"between guests on a single shared, zone-wide network in an advanced zone "
+"where KVM is the hypervisor. Using security groups in advanced zones rather "
+"than multiple VLANs allows a greater range of options for setting up guest "
+"isolation in a cloud."
+msgstr ""
+
+# 180782afad3643f1ba9672b7f6da72b3
+#: ../../networking/security_groups.rst:91
+msgid "Limitations"
+msgstr "Limitations"
+
+# 133ba38a19484e2e9122631ab38446fa
+#: ../../networking/security_groups.rst:93
+msgid "The following are not supported for this feature:"
+msgstr ""
+"Les �l�ments suivants ne sont pas pris en charge pour cette fonctionnalit� :"
+
+# 7c46f4b3ab9f405b8ba2b599ffc1985e
+#: ../../networking/security_groups.rst:95
+msgid ""
+"Two IP ranges with the same VLAN and different gateway or netmask in "
+"security group-enabled shared network."
+msgstr ""
+"Deux plages d'IP avec le m�me VLAN et une passerelle ou masque de r�seau "
+"diff�rent dans un r�seau partag� avec groupes de s�curit�."
+
+# 25d83dec92f045bda786a85257b3e1d1
+#: ../../networking/security_groups.rst:98
+msgid ""
+"Two IP ranges with the same VLAN and different gateway or netmask in "
+"account-specific shared networks."
+msgstr ""
+"Deux plages d'IP avec le m�me VLAN et une passerelle ou un masque de r�seau "
+"diff�rent dans des r�seaux partag�s sp�cifiques � un compte."
+
+# 529f72b64c464f0cbbe8b287e8258f1a
+#: ../../networking/security_groups.rst:101
+msgid "Multiple VLAN ranges in security group-enabled shared network."
+msgstr ""
+"Plusieurs plages de VLAN dans un r�seau partag� avec groupes de s�curit�."
+
+# c9ffb5f82e6b45778e4e1b83b29ed310
+#: ../../networking/security_groups.rst:103
+msgid "Multiple VLAN ranges in account-specific shared networks."
+msgstr ""
+"Plusieurs plages de VLAN dans des r�seaux partag�s sp�cifiques � un compte."
+
+# 8488c958047d450bb250b38d098bc214
+#: ../../networking/security_groups.rst:105
+msgid ""
+"Security groups must be enabled in the zone in order for this feature to be "
+"used."
+msgstr ""
+"Les groupes de s�curit� doivent �tre activ�s dans la zone pour que cette "
+"fonctionnalit� soit utilis�e."
+
+# 6c5be222e8184b8ab28d3019648e9990
+#: ../../networking/security_groups.rst:110
+msgid "Enabling Security Groups"
+msgstr "Activer les groupes de s�curit�."
+
+# b6b2af559254408ba42336e7fddf32e6
+#: ../../networking/security_groups.rst:112
+msgid ""
+"In order for security groups to function in a zone, the security groups "
+"feature must first be enabled for the zone. The administrator can do this "
+"when creating a new zone, by selecting a network offering that includes "
+"security groups. The procedure is described in Basic Zone Configuration in "
+"the Advanced Installation Guide. The administrator can not enable security "
+"groups for an existing zone, only when creating a new zone."
+msgstr ""
+
+# e09d51e1a259488eab79d1fb28954b59
+#: ../../networking/security_groups.rst:122
+msgid "Adding Ingress and Egress Rules to a Security Group"
+msgstr "Ajout de r�gles Ingress et Egress � un Groupe de S�curit�"
+
+# b24e5ca705b84ea4a6c0511ef2244936
+#: ../../networking/security_groups.rst:126
+msgid "In the left navigation, choose Network"
+msgstr "Dans la navigation � gauche, choisissez R�seau."
+
+# e6e52ad277a249ebb052f48c14687e98
+#: ../../networking/security_groups.rst:128
+msgid ""
+"In Select view, choose Security Groups, then click the security group you "
+"want."
+msgstr ""
+"Dans la liste de choix, choisir Groupes de s�curit� puis cliquer sur le "
+"groupe de s�curit� d�sir�."
+
+# 4563cb9609194e7b8bfe401fa3b6219e
+#: ../../networking/security_groups.rst:131
+msgid ""
+"To add an ingress rule, click the Ingress Rules tab and fill out the "
+"following fields to specify what network traffic is allowed into VM "
+"instances in this security group. If no ingress rules are specified, then "
+"no traffic will be allowed in, except for responses to any traffic that has "
+"been allowed out through an egress rule."
+msgstr ""
+
+# a4934e5b794b41469ff66677df530f64
+#: ../../networking/security_groups.rst:137
+msgid ""
+"**Add by CIDR/Account**. Indicate whether the source of the traffic will be "
+"defined by IP address (CIDR) or an existing security group in a CloudStack "
+"account (Account). Choose Account if you want to allow incoming traffic "
+"from all VMs in another security group"
+msgstr ""
+
+# 38c863d52b6c4f3b900f9268d71a3167
+#: ../../networking/security_groups.rst:143
+msgid ""
+"**Protocol**. The networking protocol that sources will use to send traffic "
+"to the security group. TCP and UDP are typically used for data exchange and "
+"end-user communications. ICMP is typically used to send error messages or "
+"network monitoring data."
+msgstr ""
+
+# bcb96d430c8649f483335f10c670e649
+#: ../../networking/security_groups.rst:148
+msgid ""
+"**Start Port, End Port**. (TCP, UDP only) A range of listening ports that "
+"are the destination for the incoming traffic. If you are opening a single "
+"port, use the same number in both fields."
+msgstr ""
+
+# 6c1ac4c3fb7e476a8eba891bbf1fa14e
+#: ../../networking/security_groups.rst:152
+msgid ""
+"**ICMP Type, ICMP Code**. (ICMP only) The type of message and error code "
+"that will be accepted."
+msgstr ""
+
+# 6d982263975e486e8e1b13fe56a83ed0
+#: ../../networking/security_groups.rst:155
+msgid ""
+"**CIDR**. (Add by CIDR only) To accept only traffic from IP addresses "
+"within a particular address block, enter a CIDR or a comma-separated list "
+"of CIDRs. The CIDR is the base IP address of the incoming traffic. For "
+"example, 192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
+msgstr ""
+
+# 10e7f63d3cf94152a51416bc737199ed
+#: ../../networking/security_groups.rst:161
+msgid ""
+"**Account, Security Group**. (Add by Account only) To accept only traffic "
+"from another security group, enter the CloudStack account and name of a "
+"security group that has already been defined in that account. To allow "
+"traffic between VMs within the security group you are editing now, enter "
+"the same name you used in step 7."
+msgstr ""
+
+# 9d70746377c24fdb80bdb73145dda1fe
+#: ../../networking/security_groups.rst:167
+msgid "The following example allows inbound HTTP access from anywhere:"
+msgstr ""
+"L'exemple qui suit autorise l'acc�s HTTP entrant depuis n'importe o� :"
+
+# f1fa895a70e745a182f076db946d9d16
+#: ../../networking/security_groups.rst:169
+msgid "|httpaccess.png|"
+msgstr "|httpaccess.png|"
+
+# 25c1f9eee689482ab0a99049e45c6ceb
+#: ../../networking/security_groups.rst:171
+msgid ""
+"To add an egress rule, click the Egress Rules tab and fill out the "
+"following fields to specify what type of traffic is allowed to be sent out "
+"of VM instances in this security group. If no egress rules are specified, "
+"then all traffic will be allowed out. Once egress rules are specified, the "
+"following types of traffic are allowed out: traffic specified in egress "
+"rules; queries to DNS and DHCP servers; and responses to any traffic that "
+"has been allowed in through an ingress rule"
+msgstr ""
+
+# 83bfb97418d545549c3ea5c0a17c5985
+#: ../../networking/security_groups.rst:180
+msgid ""
+"**Add by CIDR/Account**. Indicate whether the destination of the traffic "
+"will be defined by IP address (CIDR) or an existing security group in a "
+"CloudStack account (Account). Choose Account if you want to allow outgoing "
+"traffic to all VMs in another security group."
+msgstr ""
+
+# f175b78e34494795b301760a7fd5168f
+#: ../../networking/security_groups.rst:186
+msgid ""
+"**Protocol**. The networking protocol that VMs will use to send outgoing "
+"traffic. TCP and UDP are typically used for data exchange and end-user "
+"communications. ICMP is typically used to send error messages or network "
+"monitoring data."
+msgstr ""
+
+# 31089018bb9f47e4941651c91b2bd90c
+#: ../../networking/security_groups.rst:191
+msgid ""
+"**Start Port, End Port**. (TCP, UDP only) A range of listening ports that "
+"are the destination for the outgoing traffic. If you are opening a single "
+"port, use the same number in both fields."
+msgstr ""
+
+# 96661f61b9b54d448e5e7be7ba933296
+#: ../../networking/security_groups.rst:195
+msgid ""
+"**ICMP Type, ICMP Code**. (ICMP only) The type of message and error code "
+"that will be sent"
+msgstr ""
+
+# 7e52dd9e52524ea98f0bcf7ff00116ac
+#: ../../networking/security_groups.rst:198
+msgid ""
+"**CIDR**. (Add by CIDR only) To send traffic only to IP addresses within a "
+"particular address block, enter a CIDR or a comma-separated list of CIDRs. "
+"The CIDR is the base IP address of the destination. For example, "
+"192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
+msgstr ""
+
+# 40e0b1515ef948adb1a42642f73f490d
+#: ../../networking/security_groups.rst:204
+msgid ""
+"**Account, Security Group**. (Add by Account only) To allow traffic to be "
+"sent to another security group, enter the CloudStack account and name of a "
+"security group that has already been defined in that account. To allow "
+"traffic between VMs within the security group you are editing now, enter "
+"its name."
+msgstr ""
+
+# 39febf06883a4d248d1ac5ad19510065
+#: ../../networking/security_groups.rst:210
+msgid "Click Add."
+msgstr "Cliquer sur Ajouter."
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.mo
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.mo b/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.mo
new file mode 100644
index 0000000..81fe5ba
Binary files /dev/null and b/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.mo differ
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.po
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.po b/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.po
new file mode 100644
index 0000000..4b76ef9
--- /dev/null
+++ b/source/locale/fr/LC_MESSAGES/networking/site_to_site_vpn.po
@@ -0,0 +1,647 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4.8\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2016-08-22 13:55+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: Babel 2.3.4\n"
+
+#: ../../networking/site_to_site_vpn.rst:4
+msgid "Setting Up a Site-to-Site VPN Connection"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:6
+msgid ""
+"A Site-to-Site VPN connection helps you establish a secure connection "
+"from an enterprise datacenter to the cloud infrastructure. This allows "
+"users to access the guest VMs by establishing a VPN connection to the "
+"virtual router of the account from a device in the datacenter of the "
+"enterprise. You can also establish a secure connection between two VPC "
+"setups or high availability zones in your environment. Having this "
+"facility eliminates the need to establish VPN connections to individual "
+"VMs."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:15
+msgid ""
+"The difference from Remote VPN is that Site-to-site VPNs connects entire "
+"networks to each other, for example, connecting a branch office network "
+"to a company headquarters network. In a site-to-site VPN, hosts do not "
+"have VPN client software; they send and receive normal TCP/IP traffic "
+"through a VPN gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:21
+msgid "The supported endpoints on the remote datacenters are:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:23
+msgid "Cisco ISR with IOS 12.4 or later"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:25
+msgid "Juniper J-Series routers with JunOS 9.5 or later"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:27
+msgid "CloudStack virtual routers"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:30
+msgid ""
+"In addition to the specific Cisco and Juniper devices listed above, the "
+"expectation is that any Cisco or Juniper device running on the supported "
+"operating systems are able to establish VPN connections."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:34
+msgid "To set up a Site-to-Site VPN connection, perform the following:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:36
+msgid "Create a Virtual Private Cloud (VPC)."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:38
+msgid "See \":ref:`configuring-vpc`\"."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:40
+msgid "Create a VPN Customer Gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:42
+msgid "Create a VPN gateway for the VPC that you created."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:44
+msgid ""
+"Create VPN connection from the VPC VPN gateway to the customer VPN "
+"gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:49
+msgid "Creating and Updating a VPN Customer Gateway"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:52
+msgid "A VPN customer gateway can be connected to only one VPN gateway at a time."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:54
+msgid "To add a VPN Customer Gateway:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:56
+#: ../../networking/site_to_site_vpn.rst:166
+#: ../../networking/site_to_site_vpn.rst:186
+#: ../../networking/site_to_site_vpn.rst:248
+#: ../../networking/site_to_site_vpn.rst:379
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:58
+#: ../../networking/site_to_site_vpn.rst:168
+#: ../../networking/site_to_site_vpn.rst:188
+#: ../../networking/site_to_site_vpn.rst:250
+#: ../../networking/site_to_site_vpn.rst:381
+msgid "In the left navigation, choose Network."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:60
+#: ../../networking/site_to_site_vpn.rst:170
+msgid "In the Select view, select VPN Customer Gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:62
+msgid "Click Add VPN Customer Gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:64
+msgid "|addvpncustomergateway.png|"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:66
+msgid "Provide the following information:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:68
+msgid "**Name**: A unique name for the VPN customer gateway you create."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:70
+msgid "**Gateway**: The IP address for the remote gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:72
+msgid ""
+"**CIDR list**: The guest CIDR list of the remote subnets. Enter a CIDR or"
+" a comma-separated list of CIDRs. Ensure that a guest CIDR list is not "
+"overlapped with the VPC's CIDR, or another guest CIDR. The CIDR must be "
+"RFC1918-compliant."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:77
+msgid ""
+"**IPsec Preshared Key**: Preshared keying is a method where the endpoints"
+" of the VPN share a secret key. This key value is used to authenticate "
+"the customer gateway and the VPC VPN gateway to each other. The sequence "
+"cannot contain a newline or double-quote."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:83
+msgid ""
+"The IKE peers (VPN end points) authenticate each other by computing and "
+"sending a keyed hash of data that includes the Preshared key. If the "
+"receiving peer is able to create the same hash independently by using its"
+" Preshared key, it knows that both peers must share the same secret, thus"
+" authenticating the customer gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:90
+msgid ""
+"**IKE Encryption**: The Internet Key Exchange (IKE) policy for phase-1. "
+"The supported encryption algorithms are AES128, AES192, AES256, and 3DES."
+" Authentication is accomplished through the Preshared Keys."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:96
+msgid ""
+"The phase-1 is the first phase in the IKE process. In this initial "
+"negotiation phase, the two VPN endpoints agree on the methods to be used "
+"to provide security for the underlying IP traffic. The phase-1 "
+"authenticates the two VPN gateways to each other, by confirming that the "
+"remote gateway has a matching Preshared Key."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:102
+msgid ""
+"**IKE Hash**: The IKE hash for phase-1. The supported hash algorithms are"
+" SHA1 and MD5."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:105
+msgid ""
+"**IKE DH**: A public-key cryptography protocol which allows two parties "
+"to establish a shared secret over an insecure communications channel. The"
+" 1536-bit Diffie-Hellman group is used within IKE to establish session "
+"keys. The supported options are None, Group-5 (1536-bit) and Group-2 "
+"(1024-bit)."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:111
+msgid ""
+"**ESP Encryption**: Encapsulating Security Payload (ESP) algorithm within"
+" phase-2. The supported encryption algorithms are AES128, AES192, AES256,"
+" and 3DES."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:116
+msgid ""
+"The phase-2 is the second phase in the IKE process. The purpose of IKE "
+"phase-2 is to negotiate IPSec security associations (SA) to set up the "
+"IPSec tunnel. In phase-2, new keying material is extracted from the "
+"Diffie-Hellman key exchange in phase-1, to provide session keys to use in"
+" protecting the VPN data flow."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:122
+msgid ""
+"**ESP Hash**: Encapsulating Security Payload (ESP) hash for phase-2. "
+"Supported hash algorithms are SHA1 and MD5."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:125
+msgid ""
+"**Perfect Forward Secrecy**: Perfect Forward Secrecy (or PFS) is the "
+"property that ensures that a session key derived from a set of long-term "
+"public and private keys will not be compromised. This property enforces a"
+" new Diffie-Hellman key exchange. It provides the keying material that "
+"has greater key material life and thereby greater resistance to "
+"cryptographic attacks. The available options are None, Group-5 (1536-bit)"
+" and Group-2 (1024-bit). The security of the key exchanges increase as "
+"the DH groups grow larger, as does the time of the exchanges."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:136
+msgid ""
+"When PFS is turned on, for every negotiation of a new phase-2 SA the two "
+"gateways must generate a new set of phase-1 keys. This adds an extra "
+"layer of protection that PFS adds, which ensures if the phase-2 SA's have"
+" expired, the keys used for new phase-2 SA's have not been generated from"
+" the current phase-1 keying material."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:142
+msgid ""
+"**IKE Lifetime (seconds)**: The phase-1 lifetime of the security "
+"association in seconds. Default is 86400 seconds (1 day). Whenever the "
+"time expires, a new phase-1 exchange is performed."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:146
+msgid ""
+"**ESP Lifetime (seconds)**: The phase-2 lifetime of the security "
+"association in seconds. Default is 3600 seconds (1 hour). Whenever the "
+"value is exceeded, a re-key is initiated to provide a new IPsec "
+"encryption and authentication session keys."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:151
+msgid ""
+"**Dead Peer Detection**: A method to detect an unavailable Internet Key "
+"Exchange (IKE) peer. Select this option if you want the virtual router to"
+" query the liveliness of its IKE peer at regular intervals. It's "
+"recommended to have the same configuration of DPD on both side of VPN "
+"connection."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:157
+#: ../../networking/site_to_site_vpn.rst:180
+msgid "Click OK."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:161
+msgid "Updating and Removing a VPN Customer Gateway"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:163
+msgid ""
+"You can update a customer gateway either with no VPN connection, or "
+"related VPN connection is in error state."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:172
+msgid "Select the VPN customer gateway you want to work with."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:174
+msgid ""
+"To modify the required parameters, click the Edit VPN Customer Gateway "
+"button |vpn-edit-icon.png|"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:177
+msgid ""
+"To remove the VPN customer gateway, click the Delete VPN Customer Gateway"
+" button |delete.png|"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:184
+msgid "Creating a VPN gateway for the VPC"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:190
+#: ../../networking/site_to_site_vpn.rst:252
+#: ../../networking/site_to_site_vpn.rst:383
+msgid "In the Select view, select VPC."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:192
+#: ../../networking/site_to_site_vpn.rst:385
+msgid "All the VPCs that you have created for the account is listed in the page."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:195
+#: ../../networking/site_to_site_vpn.rst:256
+#: ../../networking/site_to_site_vpn.rst:388
+msgid "Click the Configure button of the VPC to which you want to deploy the VMs."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:198
+#: ../../networking/site_to_site_vpn.rst:259
+#: ../../networking/site_to_site_vpn.rst:391
+msgid ""
+"The VPC page is displayed where all the tiers you created are listed in a"
+" diagram."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:201
+#: ../../networking/site_to_site_vpn.rst:264
+#: ../../networking/site_to_site_vpn.rst:396
+msgid "For each tier, the following options are displayed:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:203
+#: ../../networking/site_to_site_vpn.rst:266
+#: ../../networking/site_to_site_vpn.rst:398
+msgid "Internal LB"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:205
+#: ../../networking/site_to_site_vpn.rst:268
+#: ../../networking/site_to_site_vpn.rst:400
+msgid "Public LB IP"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:207
+#: ../../networking/site_to_site_vpn.rst:270
+#: ../../networking/site_to_site_vpn.rst:402
+msgid "Static NAT"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:209
+#: ../../networking/site_to_site_vpn.rst:272
+#: ../../networking/site_to_site_vpn.rst:404
+msgid "Virtual Machines"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:211
+#: ../../networking/site_to_site_vpn.rst:274
+#: ../../networking/site_to_site_vpn.rst:406
+msgid "CIDR"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:213
+#: ../../networking/site_to_site_vpn.rst:276
+#: ../../networking/site_to_site_vpn.rst:408
+msgid "The following router information is displayed:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:215
+#: ../../networking/site_to_site_vpn.rst:278
+#: ../../networking/site_to_site_vpn.rst:410
+msgid "Private Gateways"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:217
+#: ../../networking/site_to_site_vpn.rst:280
+#: ../../networking/site_to_site_vpn.rst:412
+msgid "Public IP Addresses"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:219
+#: ../../networking/site_to_site_vpn.rst:282
+#: ../../networking/site_to_site_vpn.rst:414
+msgid "Site-to-Site VPNs"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:221
+#: ../../networking/site_to_site_vpn.rst:284
+#: ../../networking/site_to_site_vpn.rst:416
+msgid "Network ACL Lists"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:223
+#: ../../networking/site_to_site_vpn.rst:286
+#: ../../networking/site_to_site_vpn.rst:418
+msgid "Select Site-to-Site VPN."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:225
+msgid ""
+"If you are creating the VPN gateway for the first time, selecting Site-"
+"to-Site VPN prompts you to create a VPN gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:228
+msgid "In the confirmation dialog, click Yes to confirm."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:230
+msgid ""
+"Within a few moments, the VPN gateway is created. You will be prompted to"
+" view the details of the VPN gateway you have created. Click Yes to "
+"confirm."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:234
+msgid "The following details are displayed in the VPN Gateway page:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:236
+#: ../../networking/site_to_site_vpn.rst:316
+msgid "IP Address"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:238
+msgid "Account"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:240
+msgid "Domain"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:244
+msgid "Creating a VPN Connection"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:246
+msgid "CloudStack supports creating up to 8 VPN connections."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:254
+msgid "All the VPCs that you create for the account are listed in the page."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:262
+#: ../../networking/site_to_site_vpn.rst:394
+msgid "Click the Settings icon."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:288
+#: ../../networking/site_to_site_vpn.rst:420
+msgid "The Site-to-Site VPN page is displayed."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:290
+#: ../../networking/site_to_site_vpn.rst:422
+msgid "From the Select View drop-down, ensure that VPN Connection is selected."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:293
+msgid "Click Create VPN Connection."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:295
+msgid "The Create VPN Connection dialog is displayed:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:297
+msgid "|createvpnconnection.png|"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:299
+msgid "Select the desired customer gateway."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:301
+msgid ""
+"Select Passive if you want to establish a connection between two VPC "
+"virtual routers."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:304
+msgid ""
+"If you want to establish a connection between two VPC virtual routers, "
+"select Passive only on one of the VPC virtual routers, which waits for "
+"the other VPC virtual router to initiate the connection. Do not select "
+"Passive on the VPC virtual router that initiates the connection."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:310
+msgid "Click OK to confirm."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:312
+msgid "Within a few moments, the VPN Connection is displayed."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:314
+msgid "The following information on the VPN connection is displayed:"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:318
+msgid "Gateway"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:320
+msgid "State"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:322
+msgid "IPSec Preshared Key"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:324
+msgid "IKE Policy"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:326
+msgid "ESP Policy"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:330
+msgid "Site-to-Site VPN Connection Between VPC Networks"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:332
+msgid ""
+"CloudStack provides you with the ability to establish a site-to-site VPN "
+"connection between CloudStack virtual routers. To achieve that, add a "
+"passive mode Site-to-Site VPN. With this functionality, users can deploy "
+"applications in multiple Availability Zones or VPCs, which can "
+"communicate with each other by using a secure Site-to-Site VPN Tunnel."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:338
+msgid "This feature is supported on all the hypervisors."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:340
+msgid "Create two VPCs. For example, VPC A and VPC B."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:342
+msgid "For more information, see \":ref:`configuring-vpc`\"."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:344
+msgid "Create VPN gateways on both the VPCs you created."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:346
+msgid ""
+"For more information, see `\"Creating a VPN gateway for the VPC\" "
+"<#creating-a-vpn-gateway-for-the-vpc>`_."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:349
+msgid "Create VPN customer gateway for both the VPCs."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:351
+msgid ""
+"For more information, see `\"Creating and Updating a VPN Customer "
+"Gateway\" <#creating-and-updating-a-vpn-customer-gateway>`_."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:354
+msgid "Enable a VPN connection on VPC A in passive mode."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:356
+msgid ""
+"For more information, see `\"Creating a VPN Connection\" <#creating-a"
+"-vpn-connection>`_."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:359
+msgid ""
+"Ensure that the customer gateway is pointed to VPC B. The VPN connection "
+"is shown in the Disconnected state."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:362
+msgid "Enable a VPN connection on VPC B."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:364
+msgid ""
+"Ensure that the customer gateway is pointed to VPC A. Because virtual "
+"router of VPC A, in this case, is in passive mode and is waiting for the "
+"virtual router of VPC B to initiate the connection, VPC B virtual router "
+"should not be in passive mode."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:369
+msgid "The VPN connection is shown in the Disconnected state."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:371
+msgid ""
+"Creating VPN connection on both the VPCs initiates a VPN connection. Wait"
+" for few seconds. The default is 30 seconds for both the VPN connections "
+"to show the Connected state."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:377
+msgid "Restarting and Removing a VPN Connection"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:425
+msgid "All the VPN connections you created are displayed."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:427
+msgid "Select the VPN connection you want to work with."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:429
+msgid "The Details tab is displayed."
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:431
+msgid ""
+"To remove a VPN connection, click the Delete VPN connection button "
+"|remove-vpn.png|"
+msgstr ""
+
+#: ../../networking/site_to_site_vpn.rst:434
+msgid ""
+"To restart a VPN connection, click the Reset VPN connection button "
+"present in the Details tab. |reset-vpn.png|"
+msgstr ""
+
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/static_nat.mo
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/static_nat.mo b/source/locale/fr/LC_MESSAGES/networking/static_nat.mo
new file mode 100644
index 0000000..276cd47
Binary files /dev/null and b/source/locale/fr/LC_MESSAGES/networking/static_nat.mo differ
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/static_nat.po
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/static_nat.po b/source/locale/fr/LC_MESSAGES/networking/static_nat.po
new file mode 100644
index 0000000..94caabb
--- /dev/null
+++ b/source/locale/fr/LC_MESSAGES/networking/static_nat.po
@@ -0,0 +1,126 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration RTD\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2014-06-30 12:52+0200\n"
+"PO-Revision-Date: 2016-12-20 22:47+0100\n"
+"Language-Team: French (http://www.transifex.com/ke4qqq/apache-cloudstack-"
+"administration-rtd/language/fr/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: fr\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Last-Translator: \n"
+"X-Generator: Poedit 1.8.11\n"
+
+# 89295dfc645a421eac4401834f1b5564
+#: ../../networking/static_nat.rst:18
+msgid "Static NAT"
+msgstr "Static NAT"
+
+# c3b2d053fab944578298ac1adf46e76e
+#: ../../networking/static_nat.rst:20
+msgid ""
+"A static NAT rule maps a public IP address to the private IP address of a "
+"VM in order to allow Internet traffic into the VM. The public IP address "
+"always remains the same, which is why it is called static NAT. This section "
+"tells how to enable or disable static NAT for a particular IP address."
+msgstr ""
+"Une r�gle de NAT statique associe une adresse IP publique � l'adresse IP "
+"priv�e d'une VM afin de permettre le trafic Internet vers la machine "
+"virtuelle. L'adresse IP publique reste toujours la m�me, raison pour "
+"laquelle cette solution est appel�e static NAT. Cette section explique "
+"comment activer ou d�sactiver le static NAT pour une adresse IP "
+"particuli�re."
+
+# ffe605639e6844fa8170c65805372b4c
+#: ../../networking/static_nat.rst:28
+msgid "Enabling or Disabling Static NAT"
+msgstr "Activer ou d�sactiver le Static NAT"
+
+# 311e1bb870dd43bb98cd7ee6a01f42ca
+#: ../../networking/static_nat.rst:30
+msgid ""
+"If port forwarding rules are already in effect for an IP address, you "
+"cannot enable static NAT to that IP."
+msgstr ""
+"Si les r�gles de redirection de port sont d�j� mise en oeuvre pour une "
+"adresse IP, vous ne pouvez pas activer le static NAT pour cette IP."
+
+# b89fc2e081874b24b0ad50ed843837e9
+#: ../../networking/static_nat.rst:33
+msgid ""
+"If a guest VM is part of more than one network, static NAT rules will "
+"function only if they are defined on the default network."
+msgstr ""
+"Si une VM invit�e fait partie de plus d'un r�seau, les r�gles de static NAT "
+"ne fonctionneront uniquement si elle sont d�finies sur le r�seau par d�faut."
+
+# e6dabe6070464d23926137799673505a
+#: ../../networking/static_nat.rst:36
+msgid "Log in to the CloudStack UI as an administrator or end user."
+msgstr ""
+"Se connecter � l'interface de CloudStack comme administrateur ou "
+"utilisateur final."
+
+# 726614a43cbf4c448770c40822676059
+#: ../../networking/static_nat.rst:38
+msgid "In the left navigation, choose Network."
+msgstr "Dans la navigation � gauche, choisissez R�seau."
+
+# 71505d3318714907a3abd5319833b78e
+#: ../../networking/static_nat.rst:40
+msgid "Click the name of the network where you want to work with."
+msgstr "Cliquez sur le nom du r�seau avec lequel vous souhaitez travailler."
+
+# 0898722d18384a89a217a7a8e7cb6fbf
+#: ../../networking/static_nat.rst:42
+msgid "Click View IP Addresses."
+msgstr "Cliquez sur Voir les adresses IP."
+
+# 5e916ccbf7c94237b104827f38f2ca6a
+#: ../../networking/static_nat.rst:44
+msgid "Click the IP address you want to work with."
+msgstr "Cliquer sur l'adresse IP avec laquelle vous voulez travailler."
+
+# 4f5018aad8f14212a2d0c17d955b197a
+#: ../../networking/static_nat.rst:46
+msgid "Click the Static NAT |enabledisablenat.png| button."
+msgstr "Cliquer sur le bouton Static NAT |enabledisablenat.png|."
+
+# 001cc2e543c345afb265ff300a5435ca
+#: ../../networking/static_nat.rst:48
+msgid ""
+"The button toggles between Enable and Disable, depending on whether static "
+"NAT is currently enabled for the IP address."
+msgstr ""
+"Le bouton bascule entre Activer et D�sactiver, selon que le static NAT est "
+"actuellement activ� pour l'adresse IP."
+
+# 91178f93f90f4135b40823266a6ecb4e
+#: ../../networking/static_nat.rst:51
+msgid ""
+"If you are enabling static NAT, a dialog appears where you can choose the "
+"destination VM and click Apply."
+msgstr ""
+"Si vous activez le static NAT, une boite de dialogue appara�t dans laquelle "
+"vous pouvez choisir la VM cible et cliquer sur Appliquer."
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/using_remote_access.mo
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/using_remote_access.mo b/source/locale/fr/LC_MESSAGES/networking/using_remote_access.mo
new file mode 100644
index 0000000..da12de7
Binary files /dev/null and b/source/locale/fr/LC_MESSAGES/networking/using_remote_access.mo differ
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/using_remote_access.po
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/using_remote_access.po b/source/locale/fr/LC_MESSAGES/networking/using_remote_access.po
new file mode 100644
index 0000000..140aa13
--- /dev/null
+++ b/source/locale/fr/LC_MESSAGES/networking/using_remote_access.po
@@ -0,0 +1,139 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Apache CloudStack Administration Documentation 4.8\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2016-08-22 13:55+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EM...@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL...@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: Babel 2.3.4\n"
+
+#: ../../networking/using_remote_access.rst:18
+msgid "Using Remote Access VPN"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst
+msgid "Clients"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:27
+msgid ""
+"Remote Access VPN connection to VPC or Guest Network to access Instances "
+"and applications. This section consider you have enable Remonte acccess "
+"VPN, refer to: :ref:`remote-access-vpn`."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:29
+msgid "When connected to a VPC via VPN, the client have access to all Tiers."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:31
+msgid "Following information is required to confiture VPN client:"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:33
+msgid "``Public IP``: source NAT with VPN enabled."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:34
+msgid "``IPsec pre-shared key``: Provide at the VPN activation."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:35
+msgid "``Username`` VPN account username."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:36
+msgid "``Password`` VPN account password."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:40
+msgid "Mac OSX"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:42
+msgid "Mac OSX provide native IPsec VPN client."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:44
+msgid "Into System Preferences -> Network"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:46
+msgid "Click \"+\" button and add a VPN:"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:48
+msgid "Interface: VPN"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:49
+msgid "VPN Type: L2TP over IPSec"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:50
+msgid "Service Name: (ex: test-vpc1)"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:56
+msgid "Configure L2TP over IPsec"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:66
+msgid "Inside Authentication Settings..."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:72
+msgid "Connect into VPN"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:74
+msgid "Click Apply to apply Network configuration changes."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:75
+msgid "Click Connect to initiate VPN connection."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:83
+msgid "Microsoft Windows 8"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:85
+msgid ""
+"Following instruction have been perform using Windows 8.1 using Native "
+"VPN client."
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:87
+msgid "Create network VPN connection"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:114
+msgid "Configure VPN settings"
+msgstr ""
+
+#: ../../networking/using_remote_access.rst:136
+msgid "Initiate VPN connection"
+msgstr ""
+
http://git-wip-us.apache.org/repos/asf/cloudstack-docs-admin/blob/a6b15cb9/source/locale/fr/LC_MESSAGES/networking/virtual_private_cloud_config.mo
----------------------------------------------------------------------
diff --git a/source/locale/fr/LC_MESSAGES/networking/virtual_private_cloud_config.mo b/source/locale/fr/LC_MESSAGES/networking/virtual_private_cloud_config.mo
new file mode 100644
index 0000000..820af7e
Binary files /dev/null and b/source/locale/fr/LC_MESSAGES/networking/virtual_private_cloud_config.mo differ