You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Ugo Vasi <ug...@procne.it.INVALID> on 2018/11/19 10:29:55 UTC

number of cores

Hi all,
in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04 
with KVM hypervisor), the new entry "# of CPU Cores" appears.
Is it possible to over-provision like for MHz or storage?

Thanks


-- 

*Ugo Vasi* / System Administrator
ugo.vasi@procne.it <ma...@procne.it>




*Procne S.r.l.*
+39 0432 486 523
via Cotonificio, 45
33010 Tavagnacco (UD)
www.procne.it <http://www.procne.it/>


Le informazioni contenute nella presente comunicazione ed i relativi 
allegati possono essere riservate e sono, comunque, destinate 
esclusivamente alle persone od alla Società sopraindicati. La 
diffusione, distribuzione e/o copiatura del documento trasmesso da parte 
di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi 
dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003 
"Codice in materia di protezione dei dati personali". Se avete ricevuto 
questo messaggio per errore, vi preghiamo di distruggerlo e di informare 
immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail 
info@procne.it <ma...@procne.it>.


Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
https://pasteboard.co/HNVkBpv.png

All fine, but note that my CPU GHZ is NOT over 80% (I believe 0.8 aka 80%
is the cpu warning or disable threshold)

As Dag said, please check from mgmt logs why you can't actually spin new VM
in your case.

When you start to deploy VM, there will be some friendly printed (human
readable) lines similar to "checking list of hosts with enough resources"
and similar, it will evaluate each host for needed number of MHz and RAM
memory - and if none match, then it will fail to deploy - and it will say
that clearly, something like "no host with enough CPU capacity" or in
similar fashion...

(this is clean install though...)

Please check your "cluster.cpu.allocated.capacity.disablethreshold" both in
Global Settings, and on particular Cluster level.

Cheers

On Mon, 19 Nov 2018 at 19:12, Andrija Panic <an...@gmail.com> wrote:

> Let me test this also, on clean 4.11.2 RC5... (KVM)
>
>
> On Mon, 19 Nov 2018 at 18:47, Dag Sonstebo <Da...@shapeblue.com>
> wrote:
>
>> Andrija - not sure about your 3.4GHz cores - must a be a simplified
>> lookup somewhere making assumptions.
>>
>> Eric - have just tried your scenario in my 4.11.2RC5 lab (admittedly with
>> VMware, not KVM) - and I can see my core allocation keeps going up, e.g. at
>> the moment it sits at 166% - 10 out of 6 cores used. However it doesn't
>> stop me starting new VMs (only using 30-40% CPU and memory).
>> Are you sure it's the core count preventing you from starting VMs? What
>> do the logs say? (Also keep in mind your system VMs are now using more
>> resources that before).
>>
>> Regards,
>> Dag Sonstebo
>> Cloud Architect
>> ShapeBlue
>>
>>
>> On 19/11/2018, 17:15, "Eric Lee Green" <er...@gmail.com> wrote:
>>
>>
>>     On 11/19/18 03:56, Andrija Panic wrote:
>>     > Hi Ugo,
>>     >
>>     > Why would you want to do this, just curious ?
>>     >
>>     > I believe it's not possible, but anyway (at least with KVM,
>> probably same
>>     > for other hypervisors) it doesn't even makes sense/use, since when
>>     > deploying a VM, ACS query host free/unused number of MHz (GHz), so
>> it's not
>>     > even relevant for ACS - number of cores in not relevant in ACS
>> calculations
>>     > during VM deployment.
>>
>>
>>     I think you are misunderstanding the question. I have 72 cores in my
>>     cluster. Each of my hosts has 24 cores. With 4.9.2, I can provision
>> 10
>>     virtual machines, each of which is programmed with 8 cores, meaning
>> 80
>>     cores total. They on average are using only 25% of the CPU available
>> to
>>     them (they need to be able to burst) and my compute servers on
>> average
>>     are only 40% CPU used so that is not a problem.
>>
>>     When I tried upgrading to 4.11.1,  the dashboard showed a new value
>> "#
>>     of CPU Cores" in red and showed that I had more cores provisioned for
>>     virtual machines than available in the cluster (80 versus 72
>> available).
>>     Cloudstack would not launch new virtual machines. I shut down two
>>     virtual machines, and now I can launch one, but not the second
>> because I
>>     would need 80 cores total in my cluster. I cannot launch all 10
>> virtual
>>     machines because I would need 80 cores total. I know this because I
>>     tried it. I then used MySQL to tell Cloudstack that each of my hosts
>> has
>>     48 cores (144 total), and suddenly I can launch all of my virtual
>> machines.
>>
>>     Is this a bug in 4.11.1? Or is this expected behavior? If expected
>>     behavior, is there a way to over-provision "total # of cores used"
>> other
>>     than to go into MySQL and tell it that my hosts have more cores than
>>     they in fact have? (Note that my service offerings are limited to 8
>>     cores max, so there's no way to launch a single VM with more cores
>> than
>>     exists on a physical host, since all my hosts have 24 cores).
>>
>>
>>     > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid
>> wrote:
>>     >
>>     >> Hi all,
>>     >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu
>> 16.04
>>     >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>>     >> Is it possible to over-provision like for MHz or storage?
>>     >>
>>     >> Thanks
>>     >>
>>     >>
>>     >> --
>>     >>
>>     >> *Ugo Vasi* / System Administrator
>>     >> ugo.vasi@procne.it <ma...@procne.it>
>>     >>
>>     >>
>>     >>
>>     >>
>>     >> *Procne S.r.l.*
>>     >> +39 0432 486 523
>>     >> via Cotonificio, 45
>>     >> 33010 Tavagnacco (UD)
>>     >> www.procne.it <http://www.procne.it/>
>>     >>
>>     >>
>>     >> Le informazioni contenute nella presente comunicazione ed i
>> relativi
>>     >> allegati possono essere riservate e sono, comunque, destinate
>>     >> esclusivamente alle persone od alla Società sopraindicati. La
>>     >> diffusione, distribuzione e/o copiatura del documento trasmesso da
>> parte
>>     >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai
>> sensi
>>     >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n.
>> 196/2003
>>     >> "Codice in materia di protezione dei dati personali". Se avete
>> ricevuto
>>     >> questo messaggio per errore, vi preghiamo di distruggerlo e di
>> informare
>>     >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>>     >> info@procne.it <ma...@procne.it>.
>>     >>
>>     >>
>>
>>
>>
>> Dag.Sonstebo@shapeblue.com
>> www.shapeblue.com
>> Amadeus House, Floral Street, London  WC2E 9DPUK
>> @shapeblue
>>
>>
>>
>>
>
> --
>
> Andrija Panić
>


-- 

Andrija Panić

Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
Let me test this also, on clean 4.11.2 RC5... (KVM)


On Mon, 19 Nov 2018 at 18:47, Dag Sonstebo <Da...@shapeblue.com>
wrote:

> Andrija - not sure about your 3.4GHz cores - must a be a simplified lookup
> somewhere making assumptions.
>
> Eric - have just tried your scenario in my 4.11.2RC5 lab (admittedly with
> VMware, not KVM) - and I can see my core allocation keeps going up, e.g. at
> the moment it sits at 166% - 10 out of 6 cores used. However it doesn't
> stop me starting new VMs (only using 30-40% CPU and memory).
> Are you sure it's the core count preventing you from starting VMs? What do
> the logs say? (Also keep in mind your system VMs are now using more
> resources that before).
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
>
> On 19/11/2018, 17:15, "Eric Lee Green" <er...@gmail.com> wrote:
>
>
>     On 11/19/18 03:56, Andrija Panic wrote:
>     > Hi Ugo,
>     >
>     > Why would you want to do this, just curious ?
>     >
>     > I believe it's not possible, but anyway (at least with KVM, probably
> same
>     > for other hypervisors) it doesn't even makes sense/use, since when
>     > deploying a VM, ACS query host free/unused number of MHz (GHz), so
> it's not
>     > even relevant for ACS - number of cores in not relevant in ACS
> calculations
>     > during VM deployment.
>
>
>     I think you are misunderstanding the question. I have 72 cores in my
>     cluster. Each of my hosts has 24 cores. With 4.9.2, I can provision 10
>     virtual machines, each of which is programmed with 8 cores, meaning 80
>     cores total. They on average are using only 25% of the CPU available
> to
>     them (they need to be able to burst) and my compute servers on average
>     are only 40% CPU used so that is not a problem.
>
>     When I tried upgrading to 4.11.1,  the dashboard showed a new value "#
>     of CPU Cores" in red and showed that I had more cores provisioned for
>     virtual machines than available in the cluster (80 versus 72
> available).
>     Cloudstack would not launch new virtual machines. I shut down two
>     virtual machines, and now I can launch one, but not the second because
> I
>     would need 80 cores total in my cluster. I cannot launch all 10
> virtual
>     machines because I would need 80 cores total. I know this because I
>     tried it. I then used MySQL to tell Cloudstack that each of my hosts
> has
>     48 cores (144 total), and suddenly I can launch all of my virtual
> machines.
>
>     Is this a bug in 4.11.1? Or is this expected behavior? If expected
>     behavior, is there a way to over-provision "total # of cores used"
> other
>     than to go into MySQL and tell it that my hosts have more cores than
>     they in fact have? (Note that my service offerings are limited to 8
>     cores max, so there's no way to launch a single VM with more cores
> than
>     exists on a physical host, since all my hosts have 24 cores).
>
>
>     > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid
> wrote:
>     >
>     >> Hi all,
>     >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu
> 16.04
>     >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>     >> Is it possible to over-provision like for MHz or storage?
>     >>
>     >> Thanks
>     >>
>     >>
>     >> --
>     >>
>     >> *Ugo Vasi* / System Administrator
>     >> ugo.vasi@procne.it <ma...@procne.it>
>     >>
>     >>
>     >>
>     >>
>     >> *Procne S.r.l.*
>     >> +39 0432 486 523
>     >> via Cotonificio, 45
>     >> 33010 Tavagnacco (UD)
>     >> www.procne.it <http://www.procne.it/>
>     >>
>     >>
>     >> Le informazioni contenute nella presente comunicazione ed i relativi
>     >> allegati possono essere riservate e sono, comunque, destinate
>     >> esclusivamente alle persone od alla Società sopraindicati. La
>     >> diffusione, distribuzione e/o copiatura del documento trasmesso da
> parte
>     >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
>     >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>     >> "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
>     >> questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
>     >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>     >> info@procne.it <ma...@procne.it>.
>     >>
>     >>
>
>
>
> Dag.Sonstebo@shapeblue.com
> www.shapeblue.com
> Amadeus House, Floral Street, London  WC2E 9DPUK
> @shapeblue
>
>
>
>

-- 

Andrija Panić

Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
Eric, I sent you numbers from KVM, Ubuntu 14.04 (qemu/libvrti from Ubuntu
16.04)

Can you please reproduce the issue and upload logs - make sure to truncate
logs prior to clicking the "FINISH" button in the VM creation wizard..
Upload to pastebin, so we can check it

Cheers

On Mon, 19 Nov 2018 at 20:42, Eric Green <er...@gmail.com> wrote:

> I am with KVM.
>
> I am sure it’s the core count preventing me from starting VM’s because
> when I hack the database to tell it I have 48 cores rather than 24 cores on
> my hosts, I can then start the VM.
>
> The only thing the logs say is that I can’t create a new VM due to lack of
> resources. Then it quits saying that when I hack the database. Note that
> under 4.9.2 (what I reverted back to), Memory is at 49%, CPU is at 41%,
> Primary Storage is at 5%, and Secondary Storage is at 5%. All other
> resources aren’t even 1% used (I set up # of vlans, shared network IP’s,
> etc. fairly large because I expect to grow the cluster in the future).  4.9
> doesn’t list CPU cores. Under 4.11.1 those measures were the same.
>
> I am running KVM under Centos 7. It may be that the KVM allocator works
> different from the VMware allocator?
>
> From: Dag Sonstebo
> Sent: Monday, November 19, 2018 9:47 AM
> To: users@cloudstack.apache.org
> Subject: Re: number of cores
>
> Andrija - not sure about your 3.4GHz cores - must a be a simplified lookup
> somewhere making assumptions.
>
> Eric - have just tried your scenario in my 4.11.2RC5 lab (admittedly with
> VMware, not KVM) - and I can see my core allocation keeps going up, e.g. at
> the moment it sits at 166% - 10 out of 6 cores used. However it doesn't
> stop me starting new VMs (only using 30-40% CPU and memory).
> Are you sure it's the core count preventing you from starting VMs? What do
> the logs say? (Also keep in mind your system VMs are now using more
> resources that before).
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
>
> On 19/11/2018, 17:15, "Eric Lee Green" <er...@gmail.com> wrote:
>
>
>     On 11/19/18 03:56, Andrija Panic wrote:
>     > Hi Ugo,
>     >
>     > Why would you want to do this, just curious ?
>     >
>     > I believe it's not possible, but anyway (at least with KVM, probably
> same
>     > for other hypervisors) it doesn't even makes sense/use, since when
>     > deploying a VM, ACS query host free/unused number of MHz (GHz), so
> it's not
>     > even relevant for ACS - number of cores in not relevant in ACS
> calculations
>     > during VM deployment.
>
>
>     I think you are misunderstanding the question. I have 72 cores in my
>     cluster. Each of my hosts has 24 cores. With 4.9.2, I can provision 10
>     virtual machines, each of which is programmed with 8 cores, meaning 80
>     cores total. They on average are using only 25% of the CPU available
> to
>     them (they need to be able to burst) and my compute servers on average
>     are only 40% CPU used so that is not a problem.
>
>     When I tried upgrading to 4.11.1,  the dashboard showed a new value "#
>     of CPU Cores" in red and showed that I had more cores provisioned for
>     virtual machines than available in the cluster (80 versus 72
> available).
>     Cloudstack would not launch new virtual machines. I shut down two
>     virtual machines, and now I can launch one, but not the second because
> I
>     would need 80 cores total in my cluster. I cannot launch all 10
> virtual
>     machines because I would need 80 cores total. I know this because I
>     tried it. I then used MySQL to tell Cloudstack that each of my hosts
> has
>     48 cores (144 total), and suddenly I can launch all of my virtual
> machines.
>
>     Is this a bug in 4.11.1? Or is this expected behavior? If expected
>     behavior, is there a way to over-provision "total # of cores used"
> other
>     than to go into MySQL and tell it that my hosts have more cores than
>     they in fact have? (Note that my service offerings are limited to 8
>     cores max, so there's no way to launch a single VM with more cores
> than
>     exists on a physical host, since all my hosts have 24 cores).
>
>
>     > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid
> wrote:
>     >
>     >> Hi all,
>     >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu
> 16.04
>     >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>     >> Is it possible to over-provision like for MHz or storage?
>     >>
>     >> Thanks
>     >>
>     >>
>     >> --
>     >>
>     >> *Ugo Vasi* / System Administrator
>     >> ugo.vasi@procne.it <ma...@procne.it>
>     >>
>     >>
>     >>
>     >>
>     >> *Procne S.r.l.*
>     >> +39 0432 486 523
>     >> via Cotonificio, 45
>     >> 33010 Tavagnacco (UD)
>     >> www.procne.it <http://www.procne.it/>
>     >>
>     >>
>     >> Le informazioni contenute nella presente comunicazione ed i relativi
>     >> allegati possono essere riservate e sono, comunque, destinate
>     >> esclusivamente alle persone od alla Società sopraindicati. La
>     >> diffusione, distribuzione e/o copiatura del documento trasmesso da
> parte
>     >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
>     >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>     >> "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
>     >> questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
>     >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>     >> info@procne.it <ma...@procne.it>.
>     >>
>     >>
>
>
>
> Dag.Sonstebo@shapeblue.com
> www.shapeblue.com
> Amadeus House, Floral Street, London  WC2E 9DPUK
> @shapeblue
>
>
>
>
>

-- 

Andrija Panić

RE: number of cores

Posted by Eric Green <er...@gmail.com>.
I am with KVM.

I am sure it’s the core count preventing me from starting VM’s because when I hack the database to tell it I have 48 cores rather than 24 cores on my hosts, I can then start the VM.

The only thing the logs say is that I can’t create a new VM due to lack of resources. Then it quits saying that when I hack the database. Note that under 4.9.2 (what I reverted back to), Memory is at 49%, CPU is at 41%, Primary Storage is at 5%, and Secondary Storage is at 5%. All other resources aren’t even 1% used (I set up # of vlans, shared network IP’s, etc. fairly large because I expect to grow the cluster in the future).  4.9 doesn’t list CPU cores. Under 4.11.1 those measures were the same.  

I am running KVM under Centos 7. It may be that the KVM allocator works different from the VMware allocator? 

From: Dag Sonstebo
Sent: Monday, November 19, 2018 9:47 AM
To: users@cloudstack.apache.org
Subject: Re: number of cores

Andrija - not sure about your 3.4GHz cores - must a be a simplified lookup somewhere making assumptions.

Eric - have just tried your scenario in my 4.11.2RC5 lab (admittedly with VMware, not KVM) - and I can see my core allocation keeps going up, e.g. at the moment it sits at 166% - 10 out of 6 cores used. However it doesn't stop me starting new VMs (only using 30-40% CPU and memory). 
Are you sure it's the core count preventing you from starting VMs? What do the logs say? (Also keep in mind your system VMs are now using more resources that before).

Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
 

On 19/11/2018, 17:15, "Eric Lee Green" <er...@gmail.com> wrote:

    
    On 11/19/18 03:56, Andrija Panic wrote:
    > Hi Ugo,
    >
    > Why would you want to do this, just curious ?
    >
    > I believe it's not possible, but anyway (at least with KVM, probably same
    > for other hypervisors) it doesn't even makes sense/use, since when
    > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's not
    > even relevant for ACS - number of cores in not relevant in ACS calculations
    > during VM deployment.
    
    
    I think you are misunderstanding the question. I have 72 cores in my 
    cluster. Each of my hosts has 24 cores. With 4.9.2, I can provision 10 
    virtual machines, each of which is programmed with 8 cores, meaning 80 
    cores total. They on average are using only 25% of the CPU available to 
    them (they need to be able to burst) and my compute servers on average 
    are only 40% CPU used so that is not a problem.
    
    When I tried upgrading to 4.11.1,  the dashboard showed a new value "# 
    of CPU Cores" in red and showed that I had more cores provisioned for 
    virtual machines than available in the cluster (80 versus 72 available). 
    Cloudstack would not launch new virtual machines. I shut down two 
    virtual machines, and now I can launch one, but not the second because I 
    would need 80 cores total in my cluster. I cannot launch all 10 virtual 
    machines because I would need 80 cores total. I know this because I 
    tried it. I then used MySQL to tell Cloudstack that each of my hosts has 
    48 cores (144 total), and suddenly I can launch all of my virtual machines.
    
    Is this a bug in 4.11.1? Or is this expected behavior? If expected 
    behavior, is there a way to over-provision "total # of cores used" other 
    than to go into MySQL and tell it that my hosts have more cores than 
    they in fact have? (Note that my service offerings are limited to 8 
    cores max, so there's no way to launch a single VM with more cores than 
    exists on a physical host, since all my hosts have 24 cores).
    
    
    > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
    >
    >> Hi all,
    >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
    >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
    >> Is it possible to over-provision like for MHz or storage?
    >>
    >> Thanks
    >>
    >>
    >> --
    >>
    >> *Ugo Vasi* / System Administrator
    >> ugo.vasi@procne.it <ma...@procne.it>
    >>
    >>
    >>
    >>
    >> *Procne S.r.l.*
    >> +39 0432 486 523
    >> via Cotonificio, 45
    >> 33010 Tavagnacco (UD)
    >> www.procne.it <http://www.procne.it/>
    >>
    >>
    >> Le informazioni contenute nella presente comunicazione ed i relativi
    >> allegati possono essere riservate e sono, comunque, destinate
    >> esclusivamente alle persone od alla Società sopraindicati. La
    >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
    >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    >> info@procne.it <ma...@procne.it>.
    >>
    >>
    


Dag.Sonstebo@shapeblue.com 
www.shapeblue.com
Amadeus House, Floral Street, London  WC2E 9DPUK
@shapeblue
  
 



Re: number of cores

Posted by Dag Sonstebo <Da...@shapeblue.com>.
Andrija - not sure about your 3.4GHz cores - must a be a simplified lookup somewhere making assumptions.

Eric - have just tried your scenario in my 4.11.2RC5 lab (admittedly with VMware, not KVM) - and I can see my core allocation keeps going up, e.g. at the moment it sits at 166% - 10 out of 6 cores used. However it doesn't stop me starting new VMs (only using 30-40% CPU and memory). 
Are you sure it's the core count preventing you from starting VMs? What do the logs say? (Also keep in mind your system VMs are now using more resources that before).

Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
 

On 19/11/2018, 17:15, "Eric Lee Green" <er...@gmail.com> wrote:

    
    On 11/19/18 03:56, Andrija Panic wrote:
    > Hi Ugo,
    >
    > Why would you want to do this, just curious ?
    >
    > I believe it's not possible, but anyway (at least with KVM, probably same
    > for other hypervisors) it doesn't even makes sense/use, since when
    > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's not
    > even relevant for ACS - number of cores in not relevant in ACS calculations
    > during VM deployment.
    
    
    I think you are misunderstanding the question. I have 72 cores in my 
    cluster. Each of my hosts has 24 cores. With 4.9.2, I can provision 10 
    virtual machines, each of which is programmed with 8 cores, meaning 80 
    cores total. They on average are using only 25% of the CPU available to 
    them (they need to be able to burst) and my compute servers on average 
    are only 40% CPU used so that is not a problem.
    
    When I tried upgrading to 4.11.1,  the dashboard showed a new value "# 
    of CPU Cores" in red and showed that I had more cores provisioned for 
    virtual machines than available in the cluster (80 versus 72 available). 
    Cloudstack would not launch new virtual machines. I shut down two 
    virtual machines, and now I can launch one, but not the second because I 
    would need 80 cores total in my cluster. I cannot launch all 10 virtual 
    machines because I would need 80 cores total. I know this because I 
    tried it. I then used MySQL to tell Cloudstack that each of my hosts has 
    48 cores (144 total), and suddenly I can launch all of my virtual machines.
    
    Is this a bug in 4.11.1? Or is this expected behavior? If expected 
    behavior, is there a way to over-provision "total # of cores used" other 
    than to go into MySQL and tell it that my hosts have more cores than 
    they in fact have? (Note that my service offerings are limited to 8 
    cores max, so there's no way to launch a single VM with more cores than 
    exists on a physical host, since all my hosts have 24 cores).
    
    
    > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
    >
    >> Hi all,
    >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
    >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
    >> Is it possible to over-provision like for MHz or storage?
    >>
    >> Thanks
    >>
    >>
    >> --
    >>
    >> *Ugo Vasi* / System Administrator
    >> ugo.vasi@procne.it <ma...@procne.it>
    >>
    >>
    >>
    >>
    >> *Procne S.r.l.*
    >> +39 0432 486 523
    >> via Cotonificio, 45
    >> 33010 Tavagnacco (UD)
    >> www.procne.it <http://www.procne.it/>
    >>
    >>
    >> Le informazioni contenute nella presente comunicazione ed i relativi
    >> allegati possono essere riservate e sono, comunque, destinate
    >> esclusivamente alle persone od alla Società sopraindicati. La
    >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
    >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    >> info@procne.it <ma...@procne.it>.
    >>
    >>
    


Dag.Sonstebo@shapeblue.com 
www.shapeblue.com
Amadeus House, Floral Street, London  WC2E 9DPUK
@shapeblue
  
 


Re: number of cores

Posted by Eric Lee Green <er...@gmail.com>.
On 11/19/18 03:56, Andrija Panic wrote:
> Hi Ugo,
>
> Why would you want to do this, just curious ?
>
> I believe it's not possible, but anyway (at least with KVM, probably same
> for other hypervisors) it doesn't even makes sense/use, since when
> deploying a VM, ACS query host free/unused number of MHz (GHz), so it's not
> even relevant for ACS - number of cores in not relevant in ACS calculations
> during VM deployment.


I think you are misunderstanding the question. I have 72 cores in my 
cluster. Each of my hosts has 24 cores. With 4.9.2, I can provision 10 
virtual machines, each of which is programmed with 8 cores, meaning 80 
cores total. They on average are using only 25% of the CPU available to 
them (they need to be able to burst) and my compute servers on average 
are only 40% CPU used so that is not a problem.

When I tried upgrading to 4.11.1,  the dashboard showed a new value "# 
of CPU Cores" in red and showed that I had more cores provisioned for 
virtual machines than available in the cluster (80 versus 72 available). 
Cloudstack would not launch new virtual machines. I shut down two 
virtual machines, and now I can launch one, but not the second because I 
would need 80 cores total in my cluster. I cannot launch all 10 virtual 
machines because I would need 80 cores total. I know this because I 
tried it. I then used MySQL to tell Cloudstack that each of my hosts has 
48 cores (144 total), and suddenly I can launch all of my virtual machines.

Is this a bug in 4.11.1? Or is this expected behavior? If expected 
behavior, is there a way to over-provision "total # of cores used" other 
than to go into MySQL and tell it that my hosts have more cores than 
they in fact have? (Note that my service offerings are limited to 8 
cores max, so there's no way to launch a single VM with more cores than 
exists on a physical host, since all my hosts have 24 cores).


> On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
>
>> Hi all,
>> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
>> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>> Is it possible to over-provision like for MHz or storage?
>>
>> Thanks
>>
>>
>> --
>>
>> *Ugo Vasi* / System Administrator
>> ugo.vasi@procne.it <ma...@procne.it>
>>
>>
>>
>>
>> *Procne S.r.l.*
>> +39 0432 486 523
>> via Cotonificio, 45
>> 33010 Tavagnacco (UD)
>> www.procne.it <http://www.procne.it/>
>>
>>
>> Le informazioni contenute nella presente comunicazione ed i relativi
>> allegati possono essere riservate e sono, comunque, destinate
>> esclusivamente alle persone od alla Società sopraindicati. La
>> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
>> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
>> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>> "Codice in materia di protezione dei dati personali". Se avete ricevuto
>> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
>> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>> info@procne.it <ma...@procne.it>.
>>
>>

Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
Thx Dag for confirmation.

Speaking about CPU cores - I do have one "problem" which not sure is
possible to solve in meaningful way

2 x 8 core Intel Xeon E5 2.6GHz nominally (with HT enabled), with burst to
3.4 GHz ( but ! only a few cores can burst to that 3.4 - not all at the
same time !) -  and CloudStack reports my host as 32 x 3.4GHz (instead of
32 x 2.6 GHz)
(not sure from where does ACS extract this 3.4GHz info... - effectively my
host CPUs are overprovisioned here by 3.4 / 2.6 = 1.30 (30%
overprovisioning)

One note, we do have CPU governor set to high performance etc...

Any opinion ?

Cheers

On Mon, 19 Nov 2018 at 16:10, Dag Sonstebo <Da...@shapeblue.com>
wrote:

> Ultimately there will always be a 1-to-1 relationship between vCPU cores
> and physical cores - you can't make a 4vCPU VM run on an "overprovisioned 2
> physical core" hypervisor (unless you consider Intel HT to be exactly
> this). You can only overprovision time slices of your total clock cycles.
> If you push the limits too far on this though you get vCPU wait times -
> when there is too much contention and it ends up taking too long to
> schedule e.g. 4 vCPUs on 4 physical cores.
>
> IMO having the total number of cores is still useful information - same as
> total number of hosts and memory. Yes we know these are total numbers - but
> still gives you an idea of the capacity of your compute nodes.
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
>
> On 19/11/2018, 14:43, "Andrija Panic" <an...@gmail.com> wrote:
>
>     Unless someone gives you better answer, I guess it's for fun - to have
> more
>     detailed numbers in dashboard (may be it's related to other hypervisor
>     types, just assuming... or not...)
>
>     Cheers
>
>
> Dag.Sonstebo@shapeblue.com
> www.shapeblue.com
> Amadeus House, Floral Street, London  WC2E 9DPUK
> @shapeblue
>
>
>
> On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
>
>     > Hi Andrija,
>     > not having noticed this new voice before I wondered if it is limiting
>     > the fact of reaching or exceeding the number of physical cores.
>     >
>     > What is the purpose of this dashboard pane?
>     >
>     >
>     > Il 19/11/18 12:56, Andrija Panic ha scritto:
>     > > Hi Ugo,
>     > >
>     > > Why would you want to do this, just curious ?
>     > >
>     > > I believe it's not possible, but anyway (at least with KVM,
> probably same
>     > > for other hypervisors) it doesn't even makes sense/use, since when
>     > > deploying a VM, ACS query host free/unused number of MHz (GHz), so
> it's
>     > not
>     > > even relevant for ACS - number of cores in not relevant in ACS
>     > calculations
>     > > during VM deployment.
>     > >
>     > >
>     > > Cheers,
>     > > Andrija
>     > >
>     > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid
> wrote:
>     > >
>     > >> Hi all,
>     > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu
> 16.04
>     > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>     > >> Is it possible to over-provision like for MHz or storage?
>     > >>
>     > >> Thanks
>     > >>
>     > >>
>     > >> --
>     > >>
>     > >> *Ugo Vasi* / System Administrator
>     > >> ugo.vasi@procne.it <ma...@procne.it>
>     > >>
>     > >>
>     > >>
>     > >>
>     > >> *Procne S.r.l.*
>     > >> +39 0432 486 523
>     > >> via Cotonificio, 45
>     > >> 33010 Tavagnacco (UD)
>     > >> www.procne.it <http://www.procne.it/>
>     > >>
>     > >>
>     > >> Le informazioni contenute nella presente comunicazione ed i
> relativi
>     > >> allegati possono essere riservate e sono, comunque, destinate
>     > >> esclusivamente alle persone od alla Società sopraindicati. La
>     > >> diffusione, distribuzione e/o copiatura del documento trasmesso
> da parte
>     > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
>     > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n.
> 196/2003
>     > >> "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
>     > >> questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
>     > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>     > >> info@procne.it <ma...@procne.it>.
>     > >>
>     > >>
>     > >
>     > >
>     > >
>     >
>     >
>     > --
>     >
>     > *Ugo Vasi* / System Administrator
>     > ugo.vasi@procne.it <ma...@procne.it>
>     >
>     >
>     >
>     >
>     > *Procne S.r.l.*
>     > +39 0432 486 523
>     > via Cotonificio, 45
>     > 33010 Tavagnacco (UD)
>     > www.procne.it <http://www.procne.it/>
>     >
>     >
>     > Le informazioni contenute nella presente comunicazione ed i relativi
>     > allegati possono essere riservate e sono, comunque, destinate
>     > esclusivamente alle persone od alla Società sopraindicati. La
>     > diffusione, distribuzione e/o copiatura del documento trasmesso da
> parte
>     > di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
>     > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>     > "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
>     > questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
>     > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>     > info@procne.it <ma...@procne.it>.
>     >
>     >
>
>     --
>
>     Andrija Panić
>
>
>

-- 

Andrija Panić

Re: number of cores

Posted by Dag Sonstebo <Da...@shapeblue.com>.
Ultimately there will always be a 1-to-1 relationship between vCPU cores and physical cores - you can't make a 4vCPU VM run on an "overprovisioned 2 physical core" hypervisor (unless you consider Intel HT to be exactly this). You can only overprovision time slices of your total clock cycles. If you push the limits too far on this though you get vCPU wait times - when there is too much contention and it ends up taking too long to schedule e.g. 4 vCPUs on 4 physical cores.

IMO having the total number of cores is still useful information - same as total number of hosts and memory. Yes we know these are total numbers - but still gives you an idea of the capacity of your compute nodes.

Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
 

On 19/11/2018, 14:43, "Andrija Panic" <an...@gmail.com> wrote:

    Unless someone gives you better answer, I guess it's for fun - to have more
    detailed numbers in dashboard (may be it's related to other hypervisor
    types, just assuming... or not...)
    
    Cheers
    
    
Dag.Sonstebo@shapeblue.com 
www.shapeblue.com
Amadeus House, Floral Street, London  WC2E 9DPUK
@shapeblue
  
 

On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
    
    > Hi Andrija,
    > not having noticed this new voice before I wondered if it is limiting
    > the fact of reaching or exceeding the number of physical cores.
    >
    > What is the purpose of this dashboard pane?
    >
    >
    > Il 19/11/18 12:56, Andrija Panic ha scritto:
    > > Hi Ugo,
    > >
    > > Why would you want to do this, just curious ?
    > >
    > > I believe it's not possible, but anyway (at least with KVM, probably same
    > > for other hypervisors) it doesn't even makes sense/use, since when
    > > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's
    > not
    > > even relevant for ACS - number of cores in not relevant in ACS
    > calculations
    > > during VM deployment.
    > >
    > >
    > > Cheers,
    > > Andrija
    > >
    > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
    > >
    > >> Hi all,
    > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
    > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
    > >> Is it possible to over-provision like for MHz or storage?
    > >>
    > >> Thanks
    > >>
    > >>
    > >> --
    > >>
    > >> *Ugo Vasi* / System Administrator
    > >> ugo.vasi@procne.it <ma...@procne.it>
    > >>
    > >>
    > >>
    > >>
    > >> *Procne S.r.l.*
    > >> +39 0432 486 523
    > >> via Cotonificio, 45
    > >> 33010 Tavagnacco (UD)
    > >> www.procne.it <http://www.procne.it/>
    > >>
    > >>
    > >> Le informazioni contenute nella presente comunicazione ed i relativi
    > >> allegati possono essere riservate e sono, comunque, destinate
    > >> esclusivamente alle persone od alla Società sopraindicati. La
    > >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    > >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
    > >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    > >> info@procne.it <ma...@procne.it>.
    > >>
    > >>
    > >
    > >
    > >
    >
    >
    > --
    >
    > *Ugo Vasi* / System Administrator
    > ugo.vasi@procne.it <ma...@procne.it>
    >
    >
    >
    >
    > *Procne S.r.l.*
    > +39 0432 486 523
    > via Cotonificio, 45
    > 33010 Tavagnacco (UD)
    > www.procne.it <http://www.procne.it/>
    >
    >
    > Le informazioni contenute nella presente comunicazione ed i relativi
    > allegati possono essere riservate e sono, comunque, destinate
    > esclusivamente alle persone od alla Società sopraindicati. La
    > diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    > di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    > "Codice in materia di protezione dei dati personali". Se avete ricevuto
    > questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    > info@procne.it <ma...@procne.it>.
    >
    >
    
    -- 
    
    Andrija Panić
    


Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
FYI, tested again (CPU overprovisioning factor=1 on both Cluster and Global
level - so NO overprovisioning)

deployed VM unti it failed (could not deploy any more):

At moment of failure:
cpu used 79% (90% is disabled threshold, but VMs is big one, so would cause
91-92% usage)
number of cpu cores: 143%

So in my tests, it has nothing to do with cpu core limit (nor
overprovisioning), since I'm way above it and overprovisioning is disabled.


On Tue, 20 Nov 2018 at 00:48, Yiping Zhang <yz...@marketo.com> wrote:

> Eric:
>
> What's your value for global setting cpu.overprovisioning.factor?
>
> I have this value set to 3.0. Right now, one of my servers with 32 cores @
> 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz to
> 26 VM instances.  That's over 200% over provisioning!
>
> Yiping
>
> On 11/19/18, 6:43 AM, "Andrija Panic" <an...@gmail.com> wrote:
>
>     Unless someone gives you better answer, I guess it's for fun - to have
> more
>     detailed numbers in dashboard (may be it's related to other hypervisor
>     types, just assuming... or not...)
>
>     Cheers
>
>     On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
>
>     > Hi Andrija,
>     > not having noticed this new voice before I wondered if it is limiting
>     > the fact of reaching or exceeding the number of physical cores.
>     >
>     > What is the purpose of this dashboard pane?
>     >
>     >
>     > Il 19/11/18 12:56, Andrija Panic ha scritto:
>     > > Hi Ugo,
>     > >
>     > > Why would you want to do this, just curious ?
>     > >
>     > > I believe it's not possible, but anyway (at least with KVM,
> probably same
>     > > for other hypervisors) it doesn't even makes sense/use, since when
>     > > deploying a VM, ACS query host free/unused number of MHz (GHz), so
> it's
>     > not
>     > > even relevant for ACS - number of cores in not relevant in ACS
>     > calculations
>     > > during VM deployment.
>     > >
>     > >
>     > > Cheers,
>     > > Andrija
>     > >
>     > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid
> wrote:
>     > >
>     > >> Hi all,
>     > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu
> 16.04
>     > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>     > >> Is it possible to over-provision like for MHz or storage?
>     > >>
>     > >> Thanks
>     > >>
>     > >>
>     > >> --
>     > >>
>     > >> *Ugo Vasi* / System Administrator
>     > >> ugo.vasi@procne.it <ma...@procne.it>
>     > >>
>     > >>
>     > >>
>     > >>
>     > >> *Procne S.r.l.*
>     > >> +39 0432 486 523
>     > >> via Cotonificio, 45
>     > >> 33010 Tavagnacco (UD)
>     > >> www.procne.it <http://www.procne.it/>
>     > >>
>     > >>
>     > >> Le informazioni contenute nella presente comunicazione ed i
> relativi
>     > >> allegati possono essere riservate e sono, comunque, destinate
>     > >> esclusivamente alle persone od alla Società sopraindicati. La
>     > >> diffusione, distribuzione e/o copiatura del documento trasmesso
> da parte
>     > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
>     > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n.
> 196/2003
>     > >> "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
>     > >> questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
>     > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>     > >> info@procne.it <ma...@procne.it>.
>     > >>
>     > >>
>     > >
>     > >
>     > >
>     >
>     >
>     > --
>     >
>     > *Ugo Vasi* / System Administrator
>     > ugo.vasi@procne.it <ma...@procne.it>
>     >
>     >
>     >
>     >
>     > *Procne S.r.l.*
>     > +39 0432 486 523
>     > via Cotonificio, 45
>     > 33010 Tavagnacco (UD)
>     > www.procne.it <http://www.procne.it/>
>     >
>     >
>     > Le informazioni contenute nella presente comunicazione ed i relativi
>     > allegati possono essere riservate e sono, comunque, destinate
>     > esclusivamente alle persone od alla Società sopraindicati. La
>     > diffusione, distribuzione e/o copiatura del documento trasmesso da
> parte
>     > di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
>     > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>     > "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
>     > questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
>     > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>     > info@procne.it <ma...@procne.it>.
>     >
>     >
>
>     --
>
>     Andrija Panić
>
>
>

-- 

Andrija Panić

Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
small tip - if you change cpu overprovisioning on CLUSTER level, no need to
restart management server - it's applied immediately on the fly.

On Tue, 20 Nov 2018 at 00:59, Eric Lee Green <er...@gmail.com>
wrote:

> On 11/19/18 3:47 PM, Yiping Zhang wrote:
> > Eric:
> >
> > What's your value for global setting cpu.overprovisioning.factor?
> >
> > I have this value set to 3.0. Right now, one of my servers with 32 cores
> @ 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz
> to 26 VM instances.  That's over 200% over provisioning!
>
> I changed it to 4.0 and restarted the management server first thing. It
> started out at 1.5. At 1.5, my zone shows 41% usage with the typical
> workload -- 169.60Ghz / 409.78Ghz.  I have 2x24x3.03ghz and 1x24x2.40ghz
> servers for a total of 203.04Ghz actual, so even without the multiplier
> I'm not over provisioning my CPU Mhz.
>
> > On 11/19/18, 6:43 AM, "Andrija Panic" <an...@gmail.com> wrote:
> >
> >      Unless someone gives you better answer, I guess it's for fun - to
> have more
> >      detailed numbers in dashboard (may be it's related to other
> hypervisor
> >      types, just assuming... or not...)
> >
> >      Cheers
> >
> >      On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
> >
> >      > Hi Andrija,
> >      > not having noticed this new voice before I wondered if it is
> limiting
> >      > the fact of reaching or exceeding the number of physical cores.
> >      >
> >      > What is the purpose of this dashboard pane?
> >      >
> >      >
> >      > Il 19/11/18 12:56, Andrija Panic ha scritto:
> >      > > Hi Ugo,
> >      > >
> >      > > Why would you want to do this, just curious ?
> >      > >
> >      > > I believe it's not possible, but anyway (at least with KVM,
> probably same
> >      > > for other hypervisors) it doesn't even makes sense/use, since
> when
> >      > > deploying a VM, ACS query host free/unused number of MHz (GHz),
> so it's
> >      > not
> >      > > even relevant for ACS - number of cores in not relevant in ACS
> >      > calculations
> >      > > during VM deployment.
> >      > >
> >      > >
> >      > > Cheers,
> >      > > Andrija
> >      > >
> >      > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid
> wrote:
> >      > >
> >      > >> Hi all,
> >      > >> in the dashboard of an ACS installation vesion 4.11.1.0
> (Ubuntu 16.04
> >      > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
> >      > >> Is it possible to over-provision like for MHz or storage?
> >      > >>
> >      > >> Thanks
> >      > >>
> >      > >>
> >      > >> --
> >      > >>
> >      > >> *Ugo Vasi* / System Administrator
> >      > >> ugo.vasi@procne.it <ma...@procne.it>
> >      > >>
> >      > >>
> >      > >>
> >      > >>
> >      > >> *Procne S.r.l.*
> >      > >> +39 0432 486 523
> >      > >> via Cotonificio, 45
> >      > >> 33010 Tavagnacco (UD)
> >      > >> www.procne.it <http://www.procne.it/>
> >      > >>
> >      > >>
> >      > >> Le informazioni contenute nella presente comunicazione ed i
> relativi
> >      > >> allegati possono essere riservate e sono, comunque, destinate
> >      > >> esclusivamente alle persone od alla Società sopraindicati. La
> >      > >> diffusione, distribuzione e/o copiatura del documento
> trasmesso da parte
> >      > >> di qualsiasi soggetto diverso dal destinatario è proibita sia
> ai sensi
> >      > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n.
> 196/2003
> >      > >> "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
> >      > >> questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
> >      > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
> >      > >> info@procne.it <ma...@procne.it>.
> >      > >>
> >      > >>
> >      > >
> >      > >
> >      > >
> >      >
> >      >
> >      > --
> >      >
> >      > *Ugo Vasi* / System Administrator
> >      > ugo.vasi@procne.it <ma...@procne.it>
> >      >
> >      >
> >      >
> >      >
> >      > *Procne S.r.l.*
> >      > +39 0432 486 523
> >      > via Cotonificio, 45
> >      > 33010 Tavagnacco (UD)
> >      > www.procne.it <http://www.procne.it/>
> >      >
> >      >
> >      > Le informazioni contenute nella presente comunicazione ed i
> relativi
> >      > allegati possono essere riservate e sono, comunque, destinate
> >      > esclusivamente alle persone od alla Società sopraindicati. La
> >      > diffusione, distribuzione e/o copiatura del documento trasmesso
> da parte
> >      > di qualsiasi soggetto diverso dal destinatario è proibita sia ai
> sensi
> >      > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n.
> 196/2003
> >      > "Codice in materia di protezione dei dati personali". Se avete
> ricevuto
> >      > questo messaggio per errore, vi preghiamo di distruggerlo e di
> informare
> >      > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
> >      > info@procne.it <ma...@procne.it>.
> >      >
> >      >
> >
> >      --
> >
> >      Andrija Panić
> >
> >
>
>

-- 

Andrija Panić

Re: number of cores

Posted by Dag Sonstebo <Da...@shapeblue.com>.
Hi Eric,

Your overall issue is most likely resources - and you need to trace the VM allocation through the logs and see how the calculations and where it falls over as Andrija said - you will probably also see it putting the hosts in the avoid list as it finds them to be unsuitable. Also keep in mind for good or bad the error message "lack of resources" is sometimes a bit misleading - it's sometimes used out of context.

Your core count hack sort of proves your point - by faking the number of cores you effectively end up with double the amount of GHz in your cluster - at which point CloudStack thinks you have enough resources. The failure is not a hard limited core count in itself, it's down to the total amount of clock cycles x OP factor compared to the disable threshold. 

Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
 

On 20/11/2018, 00:39, "Yiping Zhang" <yz...@marketo.com> wrote:

    Eric:
    
    If you change any of memory or cpu over provisioning factors, you need to restart (from GUI or API) all running VM instances, otherwise the reported allocation/available numbers would still reflect data before your changes. If you also add/delete instances at the same time, you could lose track of actual allocated and available resources very quickly until you restart all your instances.
    
    Yiping
    
    On 11/19/18, 3:59 PM, "Eric Lee Green" <er...@gmail.com> wrote:
    
        On 11/19/18 3:47 PM, Yiping Zhang wrote:
        > Eric:
        >
        > What's your value for global setting cpu.overprovisioning.factor?
        >
        > I have this value set to 3.0. Right now, one of my servers with 32 cores @ 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz to 26 VM instances.  That's over 200% over provisioning!
        
        I changed it to 4.0 and restarted the management server first thing. It 
        started out at 1.5. At 1.5, my zone shows 41% usage with the typical 
        workload -- 169.60Ghz / 409.78Ghz.  I have 2x24x3.03ghz and 1x24x2.40ghz 
        servers for a total of 203.04Ghz actual, so even without the multiplier 
        I'm not over provisioning my CPU Mhz.
        
        > On 11/19/18, 6:43 AM, "Andrija Panic" <an...@gmail.com> wrote:
        >
        >      Unless someone gives you better answer, I guess it's for fun - to have more
        >      detailed numbers in dashboard (may be it's related to other hypervisor
        >      types, just assuming... or not...)
        >      
        >      Cheers
        >      
        >      
Dag.Sonstebo@shapeblue.com 
www.shapeblue.com
Amadeus House, Floral Street, London  WC2E 9DPUK
@shapeblue
  
 

On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
        >      
        >      > Hi Andrija,
        >      > not having noticed this new voice before I wondered if it is limiting
        >      > the fact of reaching or exceeding the number of physical cores.
        >      >
        >      > What is the purpose of this dashboard pane?
        >      >
        >      >
        >      > Il 19/11/18 12:56, Andrija Panic ha scritto:
        >      > > Hi Ugo,
        >      > >
        >      > > Why would you want to do this, just curious ?
        >      > >
        >      > > I believe it's not possible, but anyway (at least with KVM, probably same
        >      > > for other hypervisors) it doesn't even makes sense/use, since when
        >      > > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's
        >      > not
        >      > > even relevant for ACS - number of cores in not relevant in ACS
        >      > calculations
        >      > > during VM deployment.
        >      > >
        >      > >
        >      > > Cheers,
        >      > > Andrija
        >      > >
        >      > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
        >      > >
        >      > >> Hi all,
        >      > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
        >      > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
        >      > >> Is it possible to over-provision like for MHz or storage?
        >      > >>
        >      > >> Thanks
        >      > >>
        >      > >>
        >      > >> --
        >      > >>
        >      > >> *Ugo Vasi* / System Administrator
        >      > >> ugo.vasi@procne.it <ma...@procne.it>
        >      > >>
        >      > >>
        >      > >>
        >      > >>
        >      > >> *Procne S.r.l.*
        >      > >> +39 0432 486 523
        >      > >> via Cotonificio, 45
        >      > >> 33010 Tavagnacco (UD)
        >      > >> www.procne.it <http://www.procne.it/>
        >      > >>
        >      > >>
        >      > >> Le informazioni contenute nella presente comunicazione ed i relativi
        >      > >> allegati possono essere riservate e sono, comunque, destinate
        >      > >> esclusivamente alle persone od alla Società sopraindicati. La
        >      > >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
        >      > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
        >      > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
        >      > >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
        >      > >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
        >      > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
        >      > >> info@procne.it <ma...@procne.it>.
        >      > >>
        >      > >>
        >      > >
        >      > >
        >      > >
        >      >
        >      >
        >      > --
        >      >
        >      > *Ugo Vasi* / System Administrator
        >      > ugo.vasi@procne.it <ma...@procne.it>
        >      >
        >      >
        >      >
        >      >
        >      > *Procne S.r.l.*
        >      > +39 0432 486 523
        >      > via Cotonificio, 45
        >      > 33010 Tavagnacco (UD)
        >      > www.procne.it <http://www.procne.it/>
        >      >
        >      >
        >      > Le informazioni contenute nella presente comunicazione ed i relativi
        >      > allegati possono essere riservate e sono, comunque, destinate
        >      > esclusivamente alle persone od alla Società sopraindicati. La
        >      > diffusione, distribuzione e/o copiatura del documento trasmesso da parte
        >      > di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
        >      > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
        >      > "Codice in materia di protezione dei dati personali". Se avete ricevuto
        >      > questo messaggio per errore, vi preghiamo di distruggerlo e di informare
        >      > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
        >      > info@procne.it <ma...@procne.it>.
        >      >
        >      >
        >      
        >      --
        >      
        >      Andrija Panić
        >      
        >
        
        
    
    


Re: number of cores

Posted by Yiping Zhang <yz...@marketo.com>.
Eric:

If you change any of memory or cpu over provisioning factors, you need to restart (from GUI or API) all running VM instances, otherwise the reported allocation/available numbers would still reflect data before your changes. If you also add/delete instances at the same time, you could lose track of actual allocated and available resources very quickly until you restart all your instances.

Yiping

On 11/19/18, 3:59 PM, "Eric Lee Green" <er...@gmail.com> wrote:

    On 11/19/18 3:47 PM, Yiping Zhang wrote:
    > Eric:
    >
    > What's your value for global setting cpu.overprovisioning.factor?
    >
    > I have this value set to 3.0. Right now, one of my servers with 32 cores @ 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz to 26 VM instances.  That's over 200% over provisioning!
    
    I changed it to 4.0 and restarted the management server first thing. It 
    started out at 1.5. At 1.5, my zone shows 41% usage with the typical 
    workload -- 169.60Ghz / 409.78Ghz.  I have 2x24x3.03ghz and 1x24x2.40ghz 
    servers for a total of 203.04Ghz actual, so even without the multiplier 
    I'm not over provisioning my CPU Mhz.
    
    > On 11/19/18, 6:43 AM, "Andrija Panic" <an...@gmail.com> wrote:
    >
    >      Unless someone gives you better answer, I guess it's for fun - to have more
    >      detailed numbers in dashboard (may be it's related to other hypervisor
    >      types, just assuming... or not...)
    >      
    >      Cheers
    >      
    >      On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
    >      
    >      > Hi Andrija,
    >      > not having noticed this new voice before I wondered if it is limiting
    >      > the fact of reaching or exceeding the number of physical cores.
    >      >
    >      > What is the purpose of this dashboard pane?
    >      >
    >      >
    >      > Il 19/11/18 12:56, Andrija Panic ha scritto:
    >      > > Hi Ugo,
    >      > >
    >      > > Why would you want to do this, just curious ?
    >      > >
    >      > > I believe it's not possible, but anyway (at least with KVM, probably same
    >      > > for other hypervisors) it doesn't even makes sense/use, since when
    >      > > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's
    >      > not
    >      > > even relevant for ACS - number of cores in not relevant in ACS
    >      > calculations
    >      > > during VM deployment.
    >      > >
    >      > >
    >      > > Cheers,
    >      > > Andrija
    >      > >
    >      > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
    >      > >
    >      > >> Hi all,
    >      > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
    >      > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
    >      > >> Is it possible to over-provision like for MHz or storage?
    >      > >>
    >      > >> Thanks
    >      > >>
    >      > >>
    >      > >> --
    >      > >>
    >      > >> *Ugo Vasi* / System Administrator
    >      > >> ugo.vasi@procne.it <ma...@procne.it>
    >      > >>
    >      > >>
    >      > >>
    >      > >>
    >      > >> *Procne S.r.l.*
    >      > >> +39 0432 486 523
    >      > >> via Cotonificio, 45
    >      > >> 33010 Tavagnacco (UD)
    >      > >> www.procne.it <http://www.procne.it/>
    >      > >>
    >      > >>
    >      > >> Le informazioni contenute nella presente comunicazione ed i relativi
    >      > >> allegati possono essere riservate e sono, comunque, destinate
    >      > >> esclusivamente alle persone od alla Società sopraindicati. La
    >      > >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    >      > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    >      > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    >      > >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
    >      > >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    >      > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    >      > >> info@procne.it <ma...@procne.it>.
    >      > >>
    >      > >>
    >      > >
    >      > >
    >      > >
    >      >
    >      >
    >      > --
    >      >
    >      > *Ugo Vasi* / System Administrator
    >      > ugo.vasi@procne.it <ma...@procne.it>
    >      >
    >      >
    >      >
    >      >
    >      > *Procne S.r.l.*
    >      > +39 0432 486 523
    >      > via Cotonificio, 45
    >      > 33010 Tavagnacco (UD)
    >      > www.procne.it <http://www.procne.it/>
    >      >
    >      >
    >      > Le informazioni contenute nella presente comunicazione ed i relativi
    >      > allegati possono essere riservate e sono, comunque, destinate
    >      > esclusivamente alle persone od alla Società sopraindicati. La
    >      > diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    >      > di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    >      > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    >      > "Codice in materia di protezione dei dati personali". Se avete ricevuto
    >      > questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    >      > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    >      > info@procne.it <ma...@procne.it>.
    >      >
    >      >
    >      
    >      --
    >      
    >      Andrija Panić
    >      
    >
    
    


Re: number of cores

Posted by Eric Lee Green <er...@gmail.com>.
On 11/19/18 3:47 PM, Yiping Zhang wrote:
> Eric:
>
> What's your value for global setting cpu.overprovisioning.factor?
>
> I have this value set to 3.0. Right now, one of my servers with 32 cores @ 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz to 26 VM instances.  That's over 200% over provisioning!

I changed it to 4.0 and restarted the management server first thing. It 
started out at 1.5. At 1.5, my zone shows 41% usage with the typical 
workload -- 169.60Ghz / 409.78Ghz.  I have 2x24x3.03ghz and 1x24x2.40ghz 
servers for a total of 203.04Ghz actual, so even without the multiplier 
I'm not over provisioning my CPU Mhz.

> On 11/19/18, 6:43 AM, "Andrija Panic" <an...@gmail.com> wrote:
>
>      Unless someone gives you better answer, I guess it's for fun - to have more
>      detailed numbers in dashboard (may be it's related to other hypervisor
>      types, just assuming... or not...)
>      
>      Cheers
>      
>      On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
>      
>      > Hi Andrija,
>      > not having noticed this new voice before I wondered if it is limiting
>      > the fact of reaching or exceeding the number of physical cores.
>      >
>      > What is the purpose of this dashboard pane?
>      >
>      >
>      > Il 19/11/18 12:56, Andrija Panic ha scritto:
>      > > Hi Ugo,
>      > >
>      > > Why would you want to do this, just curious ?
>      > >
>      > > I believe it's not possible, but anyway (at least with KVM, probably same
>      > > for other hypervisors) it doesn't even makes sense/use, since when
>      > > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's
>      > not
>      > > even relevant for ACS - number of cores in not relevant in ACS
>      > calculations
>      > > during VM deployment.
>      > >
>      > >
>      > > Cheers,
>      > > Andrija
>      > >
>      > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
>      > >
>      > >> Hi all,
>      > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
>      > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>      > >> Is it possible to over-provision like for MHz or storage?
>      > >>
>      > >> Thanks
>      > >>
>      > >>
>      > >> --
>      > >>
>      > >> *Ugo Vasi* / System Administrator
>      > >> ugo.vasi@procne.it <ma...@procne.it>
>      > >>
>      > >>
>      > >>
>      > >>
>      > >> *Procne S.r.l.*
>      > >> +39 0432 486 523
>      > >> via Cotonificio, 45
>      > >> 33010 Tavagnacco (UD)
>      > >> www.procne.it <http://www.procne.it/>
>      > >>
>      > >>
>      > >> Le informazioni contenute nella presente comunicazione ed i relativi
>      > >> allegati possono essere riservate e sono, comunque, destinate
>      > >> esclusivamente alle persone od alla Società sopraindicati. La
>      > >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
>      > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
>      > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>      > >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
>      > >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
>      > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>      > >> info@procne.it <ma...@procne.it>.
>      > >>
>      > >>
>      > >
>      > >
>      > >
>      >
>      >
>      > --
>      >
>      > *Ugo Vasi* / System Administrator
>      > ugo.vasi@procne.it <ma...@procne.it>
>      >
>      >
>      >
>      >
>      > *Procne S.r.l.*
>      > +39 0432 486 523
>      > via Cotonificio, 45
>      > 33010 Tavagnacco (UD)
>      > www.procne.it <http://www.procne.it/>
>      >
>      >
>      > Le informazioni contenute nella presente comunicazione ed i relativi
>      > allegati possono essere riservate e sono, comunque, destinate
>      > esclusivamente alle persone od alla Società sopraindicati. La
>      > diffusione, distribuzione e/o copiatura del documento trasmesso da parte
>      > di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
>      > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>      > "Codice in materia di protezione dei dati personali". Se avete ricevuto
>      > questo messaggio per errore, vi preghiamo di distruggerlo e di informare
>      > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>      > info@procne.it <ma...@procne.it>.
>      >
>      >
>      
>      --
>      
>      Andrija Panić
>      
>


Re: number of cores

Posted by Yiping Zhang <yz...@marketo.com>.
Eric:

What's your value for global setting cpu.overprovisioning.factor?

I have this value set to 3.0. Right now, one of my servers with 32 cores @ 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz to 26 VM instances.  That's over 200% over provisioning!

Yiping

On 11/19/18, 6:43 AM, "Andrija Panic" <an...@gmail.com> wrote:

    Unless someone gives you better answer, I guess it's for fun - to have more
    detailed numbers in dashboard (may be it's related to other hypervisor
    types, just assuming... or not...)
    
    Cheers
    
    On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:
    
    > Hi Andrija,
    > not having noticed this new voice before I wondered if it is limiting
    > the fact of reaching or exceeding the number of physical cores.
    >
    > What is the purpose of this dashboard pane?
    >
    >
    > Il 19/11/18 12:56, Andrija Panic ha scritto:
    > > Hi Ugo,
    > >
    > > Why would you want to do this, just curious ?
    > >
    > > I believe it's not possible, but anyway (at least with KVM, probably same
    > > for other hypervisors) it doesn't even makes sense/use, since when
    > > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's
    > not
    > > even relevant for ACS - number of cores in not relevant in ACS
    > calculations
    > > during VM deployment.
    > >
    > >
    > > Cheers,
    > > Andrija
    > >
    > > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
    > >
    > >> Hi all,
    > >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
    > >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
    > >> Is it possible to over-provision like for MHz or storage?
    > >>
    > >> Thanks
    > >>
    > >>
    > >> --
    > >>
    > >> *Ugo Vasi* / System Administrator
    > >> ugo.vasi@procne.it <ma...@procne.it>
    > >>
    > >>
    > >>
    > >>
    > >> *Procne S.r.l.*
    > >> +39 0432 486 523
    > >> via Cotonificio, 45
    > >> 33010 Tavagnacco (UD)
    > >> www.procne.it <http://www.procne.it/>
    > >>
    > >>
    > >> Le informazioni contenute nella presente comunicazione ed i relativi
    > >> allegati possono essere riservate e sono, comunque, destinate
    > >> esclusivamente alle persone od alla Società sopraindicati. La
    > >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    > >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    > >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    > >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
    > >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    > >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    > >> info@procne.it <ma...@procne.it>.
    > >>
    > >>
    > >
    > >
    > >
    >
    >
    > --
    >
    > *Ugo Vasi* / System Administrator
    > ugo.vasi@procne.it <ma...@procne.it>
    >
    >
    >
    >
    > *Procne S.r.l.*
    > +39 0432 486 523
    > via Cotonificio, 45
    > 33010 Tavagnacco (UD)
    > www.procne.it <http://www.procne.it/>
    >
    >
    > Le informazioni contenute nella presente comunicazione ed i relativi
    > allegati possono essere riservate e sono, comunque, destinate
    > esclusivamente alle persone od alla Società sopraindicati. La
    > diffusione, distribuzione e/o copiatura del documento trasmesso da parte
    > di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
    > dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
    > "Codice in materia di protezione dei dati personali". Se avete ricevuto
    > questo messaggio per errore, vi preghiamo di distruggerlo e di informare
    > immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
    > info@procne.it <ma...@procne.it>.
    >
    >
    
    -- 
    
    Andrija Panić
    


Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
Unless someone gives you better answer, I guess it's for fun - to have more
detailed numbers in dashboard (may be it's related to other hypervisor
types, just assuming... or not...)

Cheers

On Mon, 19 Nov 2018 at 14:11, Ugo Vasi <ug...@procne.it> wrote:

> Hi Andrija,
> not having noticed this new voice before I wondered if it is limiting
> the fact of reaching or exceeding the number of physical cores.
>
> What is the purpose of this dashboard pane?
>
>
> Il 19/11/18 12:56, Andrija Panic ha scritto:
> > Hi Ugo,
> >
> > Why would you want to do this, just curious ?
> >
> > I believe it's not possible, but anyway (at least with KVM, probably same
> > for other hypervisors) it doesn't even makes sense/use, since when
> > deploying a VM, ACS query host free/unused number of MHz (GHz), so it's
> not
> > even relevant for ACS - number of cores in not relevant in ACS
> calculations
> > during VM deployment.
> >
> >
> > Cheers,
> > Andrija
> >
> > On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
> >
> >> Hi all,
> >> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
> >> with KVM hypervisor), the new entry "# of CPU Cores" appears.
> >> Is it possible to over-provision like for MHz or storage?
> >>
> >> Thanks
> >>
> >>
> >> --
> >>
> >> *Ugo Vasi* / System Administrator
> >> ugo.vasi@procne.it <ma...@procne.it>
> >>
> >>
> >>
> >>
> >> *Procne S.r.l.*
> >> +39 0432 486 523
> >> via Cotonificio, 45
> >> 33010 Tavagnacco (UD)
> >> www.procne.it <http://www.procne.it/>
> >>
> >>
> >> Le informazioni contenute nella presente comunicazione ed i relativi
> >> allegati possono essere riservate e sono, comunque, destinate
> >> esclusivamente alle persone od alla Società sopraindicati. La
> >> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
> >> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
> >> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
> >> "Codice in materia di protezione dei dati personali". Se avete ricevuto
> >> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
> >> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
> >> info@procne.it <ma...@procne.it>.
> >>
> >>
> >
> >
> >
>
>
> --
>
> *Ugo Vasi* / System Administrator
> ugo.vasi@procne.it <ma...@procne.it>
>
>
>
>
> *Procne S.r.l.*
> +39 0432 486 523
> via Cotonificio, 45
> 33010 Tavagnacco (UD)
> www.procne.it <http://www.procne.it/>
>
>
> Le informazioni contenute nella presente comunicazione ed i relativi
> allegati possono essere riservate e sono, comunque, destinate
> esclusivamente alle persone od alla Società sopraindicati. La
> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
> "Codice in materia di protezione dei dati personali". Se avete ricevuto
> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
> info@procne.it <ma...@procne.it>.
>
>

-- 

Andrija Panić

Re: number of cores

Posted by Ugo Vasi <ug...@procne.it.INVALID>.
Hi Andrija,
not having noticed this new voice before I wondered if it is limiting 
the fact of reaching or exceeding the number of physical cores.

What is the purpose of this dashboard pane?


Il 19/11/18 12:56, Andrija Panic ha scritto:
> Hi Ugo,
>
> Why would you want to do this, just curious ?
>
> I believe it's not possible, but anyway (at least with KVM, probably same
> for other hypervisors) it doesn't even makes sense/use, since when
> deploying a VM, ACS query host free/unused number of MHz (GHz), so it's not
> even relevant for ACS - number of cores in not relevant in ACS calculations
> during VM deployment.
>
>
> Cheers,
> Andrija
>
> On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:
>
>> Hi all,
>> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
>> with KVM hypervisor), the new entry "# of CPU Cores" appears.
>> Is it possible to over-provision like for MHz or storage?
>>
>> Thanks
>>
>>
>> --
>>
>> *Ugo Vasi* / System Administrator
>> ugo.vasi@procne.it <ma...@procne.it>
>>
>>
>>
>>
>> *Procne S.r.l.*
>> +39 0432 486 523
>> via Cotonificio, 45
>> 33010 Tavagnacco (UD)
>> www.procne.it <http://www.procne.it/>
>>
>>
>> Le informazioni contenute nella presente comunicazione ed i relativi
>> allegati possono essere riservate e sono, comunque, destinate
>> esclusivamente alle persone od alla Società sopraindicati. La
>> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
>> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
>> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
>> "Codice in materia di protezione dei dati personali". Se avete ricevuto
>> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
>> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
>> info@procne.it <ma...@procne.it>.
>>
>>
>
>
>


-- 

*Ugo Vasi* / System Administrator
ugo.vasi@procne.it <ma...@procne.it>




*Procne S.r.l.*
+39 0432 486 523
via Cotonificio, 45
33010 Tavagnacco (UD)
www.procne.it <http://www.procne.it/>


Le informazioni contenute nella presente comunicazione ed i relativi 
allegati possono essere riservate e sono, comunque, destinate 
esclusivamente alle persone od alla Società sopraindicati. La 
diffusione, distribuzione e/o copiatura del documento trasmesso da parte 
di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi 
dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003 
"Codice in materia di protezione dei dati personali". Se avete ricevuto 
questo messaggio per errore, vi preghiamo di distruggerlo e di informare 
immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail 
info@procne.it <ma...@procne.it>.


Re: number of cores

Posted by Andrija Panic <an...@gmail.com>.
Hi Ugo,

Why would you want to do this, just curious ?

I believe it's not possible, but anyway (at least with KVM, probably same
for other hypervisors) it doesn't even makes sense/use, since when
deploying a VM, ACS query host free/unused number of MHz (GHz), so it's not
even relevant for ACS - number of cores in not relevant in ACS calculations
during VM deployment.


Cheers,
Andrija

On Mon, Nov 19, 2018, 11:31 Ugo Vasi <ugo.vasi@procne.it.invalid wrote:

> Hi all,
> in the dashboard of an ACS installation vesion 4.11.1.0 (Ubuntu 16.04
> with KVM hypervisor), the new entry "# of CPU Cores" appears.
> Is it possible to over-provision like for MHz or storage?
>
> Thanks
>
>
> --
>
> *Ugo Vasi* / System Administrator
> ugo.vasi@procne.it <ma...@procne.it>
>
>
>
>
> *Procne S.r.l.*
> +39 0432 486 523
> via Cotonificio, 45
> 33010 Tavagnacco (UD)
> www.procne.it <http://www.procne.it/>
>
>
> Le informazioni contenute nella presente comunicazione ed i relativi
> allegati possono essere riservate e sono, comunque, destinate
> esclusivamente alle persone od alla Società sopraindicati. La
> diffusione, distribuzione e/o copiatura del documento trasmesso da parte
> di qualsiasi soggetto diverso dal destinatario è proibita sia ai sensi
> dell'art. 616 c.p., che ai sensi del Decreto Legislativo n. 196/2003
> "Codice in materia di protezione dei dati personali". Se avete ricevuto
> questo messaggio per errore, vi preghiamo di distruggerlo e di informare
> immediatamente Procne S.r.l. scrivendo all' indirizzo e-mail
> info@procne.it <ma...@procne.it>.
>
>