You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by ustcweizhou <gi...@git.apache.org> on 2015/10/30 20:05:59 UTC
[GitHub] cloudstack pull request: CLOUDSTACK-9013: Virtual router failed to...
GitHub user ustcweizhou opened a pull request:
https://github.com/apache/cloudstack/pull/1014
CLOUDSTACK-9013: Virtual router failed to start on KVM
This fix a typo of commit 4a177031b055f3649e3b4a00c80eddb5cafa1dd7
You can merge this pull request into a Git repository by running:
$ git pull https://github.com/ustcweizhou/cloudstack CLOUDSTACK-9013
Alternatively you can review and apply these changes as the patch at:
https://github.com/apache/cloudstack/pull/1014.patch
To close this pull request, make a commit to your master/trunk branch
with (at least) the following in the commit message:
This closes #1014
----
commit 9f7f42330aeb33ad819075586529e88db4d5c90a
Author: Wei Zhou <w....@tech.leaseweb.com>
Date: 2015-10-30T16:04:14Z
CLOUDSTACK-9013: Virtual router failed to start on KVM
This fix a typo of commit 4a177031b055f3649e3b4a00c80eddb5cafa1dd7
----
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9013: Virtual router failed to...
Posted by DaanHoogland <gi...@git.apache.org>.
Github user DaanHoogland commented on the pull request:
https://github.com/apache/cloudstack/pull/1014#issuecomment-152964107
test passed, only one hypervisor used so migration was skipped:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true \
component/test_vpc_redundant.py \
component/test_routers_iptables_default_policy.py \
component/test_routers_network_ops.py \
component/test_vpc_router_nics.py \
component/test_password_server.py \
component/test_router_dhcphosts.py \
smoke/test_loadbalance.py \
smoke/test_internal_lb.py \
smoke/test_ssvm.py \
smoke/test_network.py
```
results
```
Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_privategw_acl | Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... SKIP: At least two hosts should be present in the zone for migration
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test to create service offering ... === TestName: test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName: test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName: test_03_delete_service_offering | Status : SUCCESS ===
ok
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb | Status : SUCCESS ===
ok
Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat | Status : SUCCESS ===
ok
Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf | Status : SUCCESS ===
ok
Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
ok
test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest network ... === TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 44 tests in 8882.471s
OK (SKIP=1)
```
and
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false \
smoke/test_routers.py \
smoke/test_network_acl.py \
smoke/test_privategw_acl.py \
smoke/test_reset_vm_on_reboot.py \
smoke/test_vm_life_cycle.py \
smoke/test_vpc_vpn.py \
smoke/test_service_offerings.py \
smoke/test_network.py \
component/test_vpc_offerings.py \
component/test_vpc_routers.py
```
results
```
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network and check default routes ... === TestName: test_02_redundant_VPC_default_routes | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: test_02_routervm_iptables_policies | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Stop existing router, add a PF rule and check we can access the VM ... === TestName: test_isolate_network_FW_PF_default_routes | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_RVR_Network_FW_PF_SSH_default_routes | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Check the password file in the Router VM ... === TestName: test_isolate_network_password_server | Status : SUCCESS ===
ok
Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === TestName: test_router_dhcphosts | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb | Status : SUCCESS ===
ok
Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : SUCCESS ===
ok
Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
ok
Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
ok
Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
ok
Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
ok
Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
ok
Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
ok
Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
ok
Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
ok
Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
ok
Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat | Status : SUCCESS ===
ok
Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
ok
Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 29 tests in 12997.529s
OK
```
LGTM
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9013: Virtual router failed to...
Posted by DaanHoogland <gi...@git.apache.org>.
Github user DaanHoogland commented on the pull request:
https://github.com/apache/cloudstack/pull/1014#issuecomment-152987503
@wilderrodrigues warrants a new marvin config, right? or just a test?
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9013: Virtual router failed to...
Posted by wilderrodrigues <gi...@git.apache.org>.
Github user wilderrodrigues commented on the pull request:
https://github.com/apache/cloudstack/pull/1014#issuecomment-152984837
Hi @DaanHoogland @remibergsma @ustcweizhou, the change LGTM! :+1:
The tests I have use an isolated network with default egress as "allow", so that part of the code was not being covered.
It was a copy/paste error.
Please, @remibergsma , proceed with the merge.
Thanks for the fix, @ustcweizhou!
Cheers,
Wilder
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9013: Virtual router failed to...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on the pull request:
https://github.com/apache/cloudstack/pull/1014#issuecomment-152624797
Ping @wilderrodrigues to have a look
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9013: Virtual router failed to...
Posted by asfgit <gi...@git.apache.org>.
Github user asfgit closed the pull request at:
https://github.com/apache/cloudstack/pull/1014
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---