You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@weex.apache.org by YorkShen <ky...@apache.org> on 2019/10/14 08:10:19 UTC
[Vote] Release Apache Weex (Incubating) 0.28.0-RC1
I am going to call a vote for release Apache Weex (Incubating) 0.28.0-RC1
- Git tag for this Release: 0.28.0-RC1 [1]
- The source tarball could be found at :
https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz
- The signature of the source tarball could be found at :
https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.asc
- The SHA-512 checksum of the source tarball could be found at :
https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.sha512
- The source tarball is signed with Key:
*D7E6B58FFA293FB1AC9E7B624FD8BC09C7E9DB81*, which could be found in the
key file: https://dist.apache.org/repos/dist/release/incubator/weex/KEYS
- ChangeLog about this version:
https://github.com/apache/incubator-weex/blob/release/0.28/CHANGELOG.md
One can build the binary from source according to HOW-TO-BUILD [2] with
proper build environment.
*FYI: I only test the build scripts on Mac environment, it should also work
in Linux/Unit environment according to my understanding. But you may get
problems if you try to build Weex from source on a windows environment.*
This vote will remain open for at least 72 hours, until we get enough
votes. Please vote on releasing this RC.
- + 1 approve
- + 0 no opinion
- - 1 disapprove (and reason why)
[1] https://github.com/apache/incubator-weex/releases/tag/0.28.0-RC1
[2]
https://github.com/apache/incubator-weex/blob/release/0.28/HOW-TO-BUILD.md
Re: [Vote] Release Apache Weex (Incubating) 0.28.0-RC1
Posted by YorkShen <ky...@apache.org>.
Thanks all.
The release vote passed with three +1 binding votes.
I will post another mail in this list to formally close the vote and then
call next round of vote in incubator@asf.
Best Regards,
YorkShen
申远
Adam Feng <cx...@gmail.com> 于2019年10月17日周四 下午6:56写道：
> +1 binding
>
> I checked:
> - License is good
> - Notice is ok
> - Signature & hashes is ok
>
>
>
> Thanks.
> Adam Feng
> 在 2019年10月17日 +0800 PM5:40，Jonathan Dong <jo...@apache.org>，写道：
> > +1 binding
> >
> > I checked:
> > - License is good
> > - NOTICE is ok
> > - build from source works fine for me.
> > Thanks. On Wednesday, October 16, 2019, 09:18:13 PM GMT+8, yuan Steve <
> zhengshihan918@gmail.com> wrote:
> >
> > +1 binding
> >
> > I checked:
> > - LICENCE is good
> > - NOTICE is ok
> > - build the code from source is fine
> >
> > YorkShen <ky...@apache.org> 于2019年10月14日周一 下午4:10写道：
> >
> > > I am going to call a vote for release Apache Weex (Incubating)
> 0.28.0-RC1
> > >
> > > - Git tag for this Release: 0.28.0-RC1 [1]
> > > - The source tarball could be found at :
> > >
> > >
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz
> > > - The signature of the source tarball could be found at :
> > >
> > >
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.asc
> > > - The SHA-512 checksum of the source tarball could be found at :
> > >
> > >
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.sha512
> > > - The source tarball is signed with Key:
> > > *D7E6B58FFA293FB1AC9E7B624FD8BC09C7E9DB81*, which could be found
> in the
> > > key file:
> > > https://dist.apache.org/repos/dist/release/incubator/weex/KEYS
> > > - ChangeLog about this version:
> > >
> https://github.com/apache/incubator-weex/blob/release/0.28/CHANGELOG.md
> > >
> > > One can build the binary from source according to HOW-TO-BUILD [2] with
> > > proper build environment.
> > >
> > > *FYI: I only test the build scripts on Mac environment, it should also
> work
> > > in Linux/Unit environment according to my understanding. But you may
> get
> > > problems if you try to build Weex from source on a windows
> environment.*
> > >
> > > This vote will remain open for at least 72 hours, until we get enough
> > > votes. Please vote on releasing this RC.
> > >
> > > - + 1 approve
> > > - + 0 no opinion
> > > - - 1 disapprove (and reason why)
> > >
> > > [1] https://github.com/apache/incubator-weex/releases/tag/0.28.0-RC1
> > > [2]
> > >
> https://github.com/apache/incubator-weex/blob/release/0.28/HOW-TO-BUILD.md
> > >
> >
> >
> > --
> >
> > Best Regards!
> > ---------------------
> > Shihan Zheng (Weex project team member )
>
Re: [Vote] Release Apache Weex (Incubating) 0.28.0-RC1
Posted by Adam Feng <cx...@gmail.com>.
+1 binding
I checked:
- License is good
- Notice is ok
- Signature & hashes is ok
Thanks.
Adam Feng
在 2019年10月17日 +0800 PM5:40，Jonathan Dong <jo...@apache.org>，写道：
> +1 binding
>
> I checked:
> - License is good
> - NOTICE is ok
> - build from source works fine for me.
> Thanks. On Wednesday, October 16, 2019, 09:18:13 PM GMT+8, yuan Steve <zh...@gmail.com> wrote:
>
> +1 binding
>
> I checked:
> - LICENCE is good
> - NOTICE is ok
> - build the code from source is fine
>
> YorkShen <ky...@apache.org> 于2019年10月14日周一 下午4:10写道：
>
> > I am going to call a vote for release Apache Weex (Incubating) 0.28.0-RC1
> >
> > - Git tag for this Release: 0.28.0-RC1 [1]
> > - The source tarball could be found at :
> >
> > https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz
> > - The signature of the source tarball could be found at :
> >
> > https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.asc
> > - The SHA-512 checksum of the source tarball could be found at :
> >
> > https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.sha512
> > - The source tarball is signed with Key:
> > *D7E6B58FFA293FB1AC9E7B624FD8BC09C7E9DB81*, which could be found in the
> > key file:
> > https://dist.apache.org/repos/dist/release/incubator/weex/KEYS
> > - ChangeLog about this version:
> > https://github.com/apache/incubator-weex/blob/release/0.28/CHANGELOG.md
> >
> > One can build the binary from source according to HOW-TO-BUILD [2] with
> > proper build environment.
> >
> > *FYI: I only test the build scripts on Mac environment, it should also work
> > in Linux/Unit environment according to my understanding. But you may get
> > problems if you try to build Weex from source on a windows environment.*
> >
> > This vote will remain open for at least 72 hours, until we get enough
> > votes. Please vote on releasing this RC.
> >
> > - + 1 approve
> > - + 0 no opinion
> > - - 1 disapprove (and reason why)
> >
> > [1] https://github.com/apache/incubator-weex/releases/tag/0.28.0-RC1
> > [2]
> > https://github.com/apache/incubator-weex/blob/release/0.28/HOW-TO-BUILD.md
> >
>
>
> --
>
> Best Regards!
> ---------------------
> Shihan Zheng (Weex project team member )
Re: [Vote] Release Apache Weex (Incubating) 0.28.0-RC1
Posted by Jonathan Dong <jo...@apache.org>.
+1 binding
I checked:
- License is good
- NOTICE is ok
- build from source works fine for me.
Thanks. On Wednesday, October 16, 2019, 09:18:13 PM GMT+8, yuan Steve <zh...@gmail.com> wrote:
+1 binding
I checked:
- LICENCE is good
- NOTICE is ok
- build the code from source is fine
YorkShen <ky...@apache.org> 于2019年10月14日周一 下午4:10写道：
> I am going to call a vote for release Apache Weex (Incubating) 0.28.0-RC1
>
> - Git tag for this Release: 0.28.0-RC1 [1]
> - The source tarball could be found at :
>
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz
> - The signature of the source tarball could be found at :
>
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.asc
> - The SHA-512 checksum of the source tarball could be found at :
>
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.sha512
> - The source tarball is signed with Key:
> *D7E6B58FFA293FB1AC9E7B624FD8BC09C7E9DB81*, which could be found in the
> key file:
> https://dist.apache.org/repos/dist/release/incubator/weex/KEYS
> - ChangeLog about this version:
> https://github.com/apache/incubator-weex/blob/release/0.28/CHANGELOG.md
>
> One can build the binary from source according to HOW-TO-BUILD [2] with
> proper build environment.
>
> *FYI: I only test the build scripts on Mac environment, it should also work
> in Linux/Unit environment according to my understanding. But you may get
> problems if you try to build Weex from source on a windows environment.*
>
> This vote will remain open for at least 72 hours, until we get enough
> votes. Please vote on releasing this RC.
>
> - + 1 approve
> - + 0 no opinion
> - - 1 disapprove (and reason why)
>
> [1] https://github.com/apache/incubator-weex/releases/tag/0.28.0-RC1
> [2]
> https://github.com/apache/incubator-weex/blob/release/0.28/HOW-TO-BUILD.md
>
--
Best Regards!
---------------------
Shihan Zheng (Weex project team member )
Re: [Vote] Release Apache Weex (Incubating) 0.28.0-RC1
Posted by yuan Steve <zh...@gmail.com>.
+1 binding
I checked:
- LICENCE is good
- NOTICE is ok
- build the code from source is fine
YorkShen <ky...@apache.org> 于2019年10月14日周一 下午4:10写道：
> I am going to call a vote for release Apache Weex (Incubating) 0.28.0-RC1
>
> - Git tag for this Release: 0.28.0-RC1 [1]
> - The source tarball could be found at :
>
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz
> - The signature of the source tarball could be found at :
>
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.asc
> - The SHA-512 checksum of the source tarball could be found at :
>
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.sha512
> - The source tarball is signed with Key:
> *D7E6B58FFA293FB1AC9E7B624FD8BC09C7E9DB81*, which could be found in the
> key file:
> https://dist.apache.org/repos/dist/release/incubator/weex/KEYS
> - ChangeLog about this version:
> https://github.com/apache/incubator-weex/blob/release/0.28/CHANGELOG.md
>
> One can build the binary from source according to HOW-TO-BUILD [2] with
> proper build environment.
>
> *FYI: I only test the build scripts on Mac environment, it should also work
> in Linux/Unit environment according to my understanding. But you may get
> problems if you try to build Weex from source on a windows environment.*
>
> This vote will remain open for at least 72 hours, until we get enough
> votes. Please vote on releasing this RC.
>
> - + 1 approve
> - + 0 no opinion
> - - 1 disapprove (and reason why)
>
> [1] https://github.com/apache/incubator-weex/releases/tag/0.28.0-RC1
> [2]
> https://github.com/apache/incubator-weex/blob/release/0.28/HOW-TO-BUILD.md
>
--
Best Regards!
---------------------
Shihan Zheng (Weex project team member )
Re: [Vote] Release Apache Weex (Incubating) 0.28.0-RC1
Posted by linghe <li...@icloud.com.INVALID>.
+1 Apache Weex should graduate
> 在 2019年10月14日，下午4:10，YorkShen <ky...@apache.org> 写道：
>
> I am going to call a vote for release Apache Weex (Incubating) 0.28.0-RC1
>
> - Git tag for this Release: 0.28.0-RC1 [1]
> - The source tarball could be found at :
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz
> - The signature of the source tarball could be found at :
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.asc
> - The SHA-512 checksum of the source tarball could be found at :
> https://dist.apache.org/repos/dist/dev/incubator/weex/0.28.0/RC1/apache-weex-incubating-0.28.0-RC1-src.tar.gz.sha512
> - The source tarball is signed with Key:
> *D7E6B58FFA293FB1AC9E7B624FD8BC09C7E9DB81*, which could be found in the
> key file: https://dist.apache.org/repos/dist/release/incubator/weex/KEYS
> - ChangeLog about this version:
> https://github.com/apache/incubator-weex/blob/release/0.28/CHANGELOG.md
>
> One can build the binary from source according to HOW-TO-BUILD [2] with
> proper build environment.
>
> *FYI: I only test the build scripts on Mac environment, it should also work
> in Linux/Unit environment according to my understanding. But you may get
> problems if you try to build Weex from source on a windows environment.*
>
> This vote will remain open for at least 72 hours, until we get enough
> votes. Please vote on releasing this RC.
>
> - + 1 approve
> - + 0 no opinion
> - - 1 disapprove (and reason why)
>
> [1] https://github.com/apache/incubator-weex/releases/tag/0.28.0-RC1
> [2]
> https://github.com/apache/incubator-weex/blob/release/0.28/HOW-TO-BUILD.md