You are viewing a plain text version of this content. The canonical link for it is here.
Posted to issues@hbase.apache.org by Ted Yu <yu...@gmail.com> on 2012/10/30 04:37:36 UTC
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Can you try with 0.94.2 or tip of 0.94 ?
0.94.0 is quite old.
On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
> Hi hbase deve, QA, Shixing,
>
> I'll highly appreciate you if you can answer the questions.
>
>
> Hi Shixing,
>
> I found in HBASE-6269, you did a full unit tests, but did you try it
> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
> Thanks for your info.
>
>
>
> ---------- Forwarded message ----------
> From: Liping Zhang <zl...@gmail.com>
> Date: Tue, Oct 30, 2012 at 11:18 AM
> Subject: hbase 0.94.0 failed to individually run test case with
> org.apache.hadoop.hbase.TestZookeeper
> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>
>
>
> Hi Ted Yu, Stack and Andrew,
>
> How are thing going? I met some issues when I individually run HBase
> 0.94.0 unit tests, can you help me out?
>
> -------------------------
> *question #1:*
>
> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
> test". It seems there was no unit testThe result showed as following:
>
> -------------------------------------------------------
> T E S T S
> -------------------------------------------------------
>
> Results :
>
> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>
>
> --------------------------
> question #2:*
>
> How to skip to some test cases when I run full Hbase unit tests? Is there
> any command?
>
>
> ----------------------------
> *question #3:*
> I tried individual tests, and found that it didn't run any test case with
> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
> *
> Thanks very much for your answering!
>
> --
> Thanks!
>
> Best Regards,
> Liping Zhang
>
>
>
>
> --
> Thanks!
>
> Best Regards,
> Liping Zhang(张 莉苹)
>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Thanks for your quick reply, Ted Yu!:)
Do not have chance to try with 0.94.2, will try it later.
However, what we are using is 0.94.0, did you ever met these issues before
with 0.94.0 release QA?
Ted Yu
11:37 AM (13 minutes ago)
to me, dev, user, issues, paradisehit, stack, apurtell
Can you try with 0.94.2 or tip of 0.94 ?
0.94.0 is quite old.
On Tue, Oct 30, 2012 at 11:37 AM, Ted Yu <yu...@gmail.com> wrote:
> Can you try with 0.94.2 or tip of 0.94 ?
> 0.94.0 is quite old.
>
>
> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>
>> Hi hbase deve, QA, Shixing,
>>
>> I'll highly appreciate you if you can answer the questions.
>>
>>
>> Hi Shixing,
>>
>> I found in HBASE-6269, you did a full unit tests, but did you try it
>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>> Thanks for your info.
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Liping Zhang <zl...@gmail.com>
>> Date: Tue, Oct 30, 2012 at 11:18 AM
>> Subject: hbase 0.94.0 failed to individually run test case with
>> org.apache.hadoop.hbase.TestZookeeper
>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>
>>
>>
>> Hi Ted Yu, Stack and Andrew,
>>
>> How are thing going? I met some issues when I individually run HBase
>> 0.94.0 unit tests, can you help me out?
>>
>> -------------------------
>> *question #1:*
>>
>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>> test". It seems there was no unit testThe result showed as following:
>>
>> -------------------------------------------------------
>> T E S T S
>> -------------------------------------------------------
>>
>> Results :
>>
>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>
>>
>> --------------------------
>> question #2:*
>>
>> How to skip to some test cases when I run full Hbase unit tests? Is there
>> any command?
>>
>>
>> ----------------------------
>> *question #3:*
>> I tried individual tests, and found that it didn't run any test case with
>> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
>> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
>> *
>> Thanks very much for your answering!
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang
>>
>>
>>
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang(张 莉苹)
>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Sergey Shelukhin <se...@hortonworks.com>.
http://hbase.apache.org/book.html#hbase.unittests.cmds
has the description of the various commands that you can use to run
various categories.
Maven docs tell you how to skip some test via config (project file):
http://maven.apache.org/plugins/maven-surefire-plugin/examples/inclusion-exclusion.html
I am not sure this will work, but you can try using patterns that
would exclude tests in -Dtest=... value.
On Thu, Nov 1, 2012 at 9:43 AM, Liping Zhang <zl...@gmail.com> wrote:
> Hello Nicolas,
>
> Oh, it is a typo. :) Thanks very much! By the way, can you also help to
> answer following question?
>
> HBase unit tests (command `mvn test`) are *seperated into two parts*
> in*HBase 0.94.0,
> * do you know how to let it only run the first part, but not run the
> second part with `mvn test`? How to skip some specific test cases when I
> run full Hbase unit tests with 'mvn test' command? Is there any command or
> can I set it in some configuration files?
>
> Highly appreciate and have a good day!
>
> On Tue, Oct 30, 2012 at 5:27 PM, Nicolas Liochon <nk...@gmail.com> wrote:
>
>> Hi,
>>
>> It's ok with a capital 'K'
>>
>> mvn -PlocalTests -Dtest=TestZoo*K*eeper test
>> Running org.apache.hadoop.hbase.TestZooKeeper
>> Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 198.84 sec
>>
>> ;-)
>>
>> Nicolas
>>
>>
>> On Tue, Oct 30, 2012 at 5:50 AM, Ted Yu <yu...@gmail.com> wrote:
>>
>>> The following command didn't run any test:
>>> *mvn -PlocalTests -Dtest=TestZookeeper test*
>>>
>>> N:
>>> Do you know why ?
>>>
>>> On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
>>>
>>>> To answer your first question, you need to specify the following:
>>>> mvn test -PlocalTests -Dtest=
>>>>
>>>>
>>>> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>>>>
>>>>> Can you try with 0.94.2 or tip of 0.94 ?
>>>>> 0.94.0 is quite old.
>>>>>
>>>>>
>>>>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com>wrote:
>>>>>
>>>>>> Hi hbase deve, QA, Shixing,
>>>>>>
>>>>>> I'll highly appreciate you if you can answer the questions.
>>>>>>
>>>>>>
>>>>>> Hi Shixing,
>>>>>>
>>>>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>>>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>>>>> Thanks for your info.
>>>>>>
>>>>>>
>>>>>>
>>>>>> ---------- Forwarded message ----------
>>>>>> From: Liping Zhang <zl...@gmail.com>
>>>>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>>>>> Subject: hbase 0.94.0 failed to individually run test case with
>>>>>> org.apache.hadoop.hbase.TestZookeeper
>>>>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Ted Yu, Stack and Andrew,
>>>>>>
>>>>>> How are thing going? I met some issues when I individually run HBase
>>>>>> 0.94.0 unit tests, can you help me out?
>>>>>>
>>>>>> -------------------------
>>>>>> *question #1:*
>>>>>>
>>>>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that
>>>>>> it was failed to *individually *run
>>>>>> org.apache.hadoop.hbase.TestZookeeper and
>>>>>> org.apache.hadoop.hbase.regionserver.TestHRegion when I individually ran it
>>>>>> with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion test". It
>>>>>> seems there was no unit testThe result showed as following:
>>>>>>
>>>>>>
>>>>>> -------------------------------------------------------
>>>>>> T E S T S
>>>>>> -------------------------------------------------------
>>>>>>
>>>>>> Results :
>>>>>>
>>>>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>>>>
>>>>>>
>>>>>> --------------------------
>>>>>> question #2:*
>>>>>>
>>>>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>>>>> there any command?
>>>>>>
>>>>>>
>>>>>> ----------------------------
>>>>>> *question #3:*
>>>>>> I tried individual tests, and found that it didn't run any test case
>>>>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>>>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>>>>> happens?
>>>>>> *
>>>>>> *
>>>>>> Thanks very much for your answering!
>>>>>>
>>>>>> --
>>>>>> Thanks!
>>>>>>
>>>>>> Best Regards,
>>>>>> Liping Zhang
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Thanks!
>>>>>>
>>>>>> Best Regards,
>>>>>> Liping Zhang(张 莉苹)
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
>
> --
> Thanks!
>
> Best Regards,
> Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Hello Nicolas,
Oh, it is a typo. :) Thanks very much! By the way, can you also help to
answer following question?
HBase unit tests (command `mvn test`) are *seperated into two parts*
in*HBase 0.94.0,
* do you know how to let it only run the first part, but not run the
second part with `mvn test`? How to skip some specific test cases when I
run full Hbase unit tests with 'mvn test' command? Is there any command or
can I set it in some configuration files?
Highly appreciate and have a good day!
On Tue, Oct 30, 2012 at 5:27 PM, Nicolas Liochon <nk...@gmail.com> wrote:
> Hi,
>
> It's ok with a capital 'K'
>
> mvn -PlocalTests -Dtest=TestZoo*K*eeper test
> Running org.apache.hadoop.hbase.TestZooKeeper
> Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 198.84 sec
>
> ;-)
>
> Nicolas
>
>
> On Tue, Oct 30, 2012 at 5:50 AM, Ted Yu <yu...@gmail.com> wrote:
>
>> The following command didn't run any test:
>> *mvn -PlocalTests -Dtest=TestZookeeper test*
>>
>> N:
>> Do you know why ?
>>
>> On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
>>
>>> To answer your first question, you need to specify the following:
>>> mvn test -PlocalTests -Dtest=
>>>
>>>
>>> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>>>
>>>> Can you try with 0.94.2 or tip of 0.94 ?
>>>> 0.94.0 is quite old.
>>>>
>>>>
>>>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com>wrote:
>>>>
>>>>> Hi hbase deve, QA, Shixing,
>>>>>
>>>>> I'll highly appreciate you if you can answer the questions.
>>>>>
>>>>>
>>>>> Hi Shixing,
>>>>>
>>>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>>>> Thanks for your info.
>>>>>
>>>>>
>>>>>
>>>>> ---------- Forwarded message ----------
>>>>> From: Liping Zhang <zl...@gmail.com>
>>>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>>>> Subject: hbase 0.94.0 failed to individually run test case with
>>>>> org.apache.hadoop.hbase.TestZookeeper
>>>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>>>
>>>>>
>>>>>
>>>>> Hi Ted Yu, Stack and Andrew,
>>>>>
>>>>> How are thing going? I met some issues when I individually run HBase
>>>>> 0.94.0 unit tests, can you help me out?
>>>>>
>>>>> -------------------------
>>>>> *question #1:*
>>>>>
>>>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that
>>>>> it was failed to *individually *run
>>>>> org.apache.hadoop.hbase.TestZookeeper and
>>>>> org.apache.hadoop.hbase.regionserver.TestHRegion when I individually ran it
>>>>> with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion test". It
>>>>> seems there was no unit testThe result showed as following:
>>>>>
>>>>>
>>>>> -------------------------------------------------------
>>>>> T E S T S
>>>>> -------------------------------------------------------
>>>>>
>>>>> Results :
>>>>>
>>>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>>>
>>>>>
>>>>> --------------------------
>>>>> question #2:*
>>>>>
>>>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>>>> there any command?
>>>>>
>>>>>
>>>>> ----------------------------
>>>>> *question #3:*
>>>>> I tried individual tests, and found that it didn't run any test case
>>>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>>>> happens?
>>>>> *
>>>>> *
>>>>> Thanks very much for your answering!
>>>>>
>>>>> --
>>>>> Thanks!
>>>>>
>>>>> Best Regards,
>>>>> Liping Zhang
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Thanks!
>>>>>
>>>>> Best Regards,
>>>>> Liping Zhang(张 莉苹)
>>>>>
>>>>>
>>>>
>>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Hello Nicolas,
Oh, it is a typo. :) Thanks very much! By the way, can you also help to
answer following question?
HBase unit tests (command `mvn test`) are *seperated into two parts*
in*HBase 0.94.0,
* do you know how to let it only run the first part, but not run the
second part with `mvn test`? How to skip some specific test cases when I
run full Hbase unit tests with 'mvn test' command? Is there any command or
can I set it in some configuration files?
Highly appreciate and have a good day!
On Tue, Oct 30, 2012 at 5:27 PM, Nicolas Liochon <nk...@gmail.com> wrote:
> Hi,
>
> It's ok with a capital 'K'
>
> mvn -PlocalTests -Dtest=TestZoo*K*eeper test
> Running org.apache.hadoop.hbase.TestZooKeeper
> Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 198.84 sec
>
> ;-)
>
> Nicolas
>
>
> On Tue, Oct 30, 2012 at 5:50 AM, Ted Yu <yu...@gmail.com> wrote:
>
>> The following command didn't run any test:
>> *mvn -PlocalTests -Dtest=TestZookeeper test*
>>
>> N:
>> Do you know why ?
>>
>> On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
>>
>>> To answer your first question, you need to specify the following:
>>> mvn test -PlocalTests -Dtest=
>>>
>>>
>>> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>>>
>>>> Can you try with 0.94.2 or tip of 0.94 ?
>>>> 0.94.0 is quite old.
>>>>
>>>>
>>>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com>wrote:
>>>>
>>>>> Hi hbase deve, QA, Shixing,
>>>>>
>>>>> I'll highly appreciate you if you can answer the questions.
>>>>>
>>>>>
>>>>> Hi Shixing,
>>>>>
>>>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>>>> Thanks for your info.
>>>>>
>>>>>
>>>>>
>>>>> ---------- Forwarded message ----------
>>>>> From: Liping Zhang <zl...@gmail.com>
>>>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>>>> Subject: hbase 0.94.0 failed to individually run test case with
>>>>> org.apache.hadoop.hbase.TestZookeeper
>>>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>>>
>>>>>
>>>>>
>>>>> Hi Ted Yu, Stack and Andrew,
>>>>>
>>>>> How are thing going? I met some issues when I individually run HBase
>>>>> 0.94.0 unit tests, can you help me out?
>>>>>
>>>>> -------------------------
>>>>> *question #1:*
>>>>>
>>>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that
>>>>> it was failed to *individually *run
>>>>> org.apache.hadoop.hbase.TestZookeeper and
>>>>> org.apache.hadoop.hbase.regionserver.TestHRegion when I individually ran it
>>>>> with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion test". It
>>>>> seems there was no unit testThe result showed as following:
>>>>>
>>>>>
>>>>> -------------------------------------------------------
>>>>> T E S T S
>>>>> -------------------------------------------------------
>>>>>
>>>>> Results :
>>>>>
>>>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>>>
>>>>>
>>>>> --------------------------
>>>>> question #2:*
>>>>>
>>>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>>>> there any command?
>>>>>
>>>>>
>>>>> ----------------------------
>>>>> *question #3:*
>>>>> I tried individual tests, and found that it didn't run any test case
>>>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>>>> happens?
>>>>> *
>>>>> *
>>>>> Thanks very much for your answering!
>>>>>
>>>>> --
>>>>> Thanks!
>>>>>
>>>>> Best Regards,
>>>>> Liping Zhang
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Thanks!
>>>>>
>>>>> Best Regards,
>>>>> Liping Zhang(张 莉苹)
>>>>>
>>>>>
>>>>
>>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Nicolas Liochon <nk...@gmail.com>.
Hi,
It's ok with a capital 'K'
mvn -PlocalTests -Dtest=TestZoo*K*eeper test
Running org.apache.hadoop.hbase.TestZooKeeper
Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 198.84 sec
;-)
Nicolas
On Tue, Oct 30, 2012 at 5:50 AM, Ted Yu <yu...@gmail.com> wrote:
> The following command didn't run any test:
> *mvn -PlocalTests -Dtest=TestZookeeper test*
>
> N:
> Do you know why ?
>
> On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> To answer your first question, you need to specify the following:
>> mvn test -PlocalTests -Dtest=
>>
>>
>> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>>
>>> Can you try with 0.94.2 or tip of 0.94 ?
>>> 0.94.0 is quite old.
>>>
>>>
>>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com>wrote:
>>>
>>>> Hi hbase deve, QA, Shixing,
>>>>
>>>> I'll highly appreciate you if you can answer the questions.
>>>>
>>>>
>>>> Hi Shixing,
>>>>
>>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>>> Thanks for your info.
>>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: Liping Zhang <zl...@gmail.com>
>>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>>> Subject: hbase 0.94.0 failed to individually run test case with
>>>> org.apache.hadoop.hbase.TestZookeeper
>>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>>
>>>>
>>>>
>>>> Hi Ted Yu, Stack and Andrew,
>>>>
>>>> How are thing going? I met some issues when I individually run HBase
>>>> 0.94.0 unit tests, can you help me out?
>>>>
>>>> -------------------------
>>>> *question #1:*
>>>>
>>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that
>>>> it was failed to *individually *run
>>>> org.apache.hadoop.hbase.TestZookeeper and
>>>> org.apache.hadoop.hbase.regionserver.TestHRegion when I individually ran it
>>>> with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion test". It
>>>> seems there was no unit testThe result showed as following:
>>>>
>>>>
>>>> -------------------------------------------------------
>>>> T E S T S
>>>> -------------------------------------------------------
>>>>
>>>> Results :
>>>>
>>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>>
>>>>
>>>> --------------------------
>>>> question #2:*
>>>>
>>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>>> there any command?
>>>>
>>>>
>>>> ----------------------------
>>>> *question #3:*
>>>> I tried individual tests, and found that it didn't run any test case
>>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>>> happens?
>>>> *
>>>> *
>>>> Thanks very much for your answering!
>>>>
>>>> --
>>>> Thanks!
>>>>
>>>> Best Regards,
>>>> Liping Zhang
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Thanks!
>>>>
>>>> Best Regards,
>>>> Liping Zhang(张 莉苹)
>>>>
>>>>
>>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Nicolas Liochon <nk...@gmail.com>.
Hi,
It's ok with a capital 'K'
mvn -PlocalTests -Dtest=TestZoo*K*eeper test
Running org.apache.hadoop.hbase.TestZooKeeper
Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 198.84 sec
;-)
Nicolas
On Tue, Oct 30, 2012 at 5:50 AM, Ted Yu <yu...@gmail.com> wrote:
> The following command didn't run any test:
> *mvn -PlocalTests -Dtest=TestZookeeper test*
>
> N:
> Do you know why ?
>
> On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> To answer your first question, you need to specify the following:
>> mvn test -PlocalTests -Dtest=
>>
>>
>> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>>
>>> Can you try with 0.94.2 or tip of 0.94 ?
>>> 0.94.0 is quite old.
>>>
>>>
>>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com>wrote:
>>>
>>>> Hi hbase deve, QA, Shixing,
>>>>
>>>> I'll highly appreciate you if you can answer the questions.
>>>>
>>>>
>>>> Hi Shixing,
>>>>
>>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>>> Thanks for your info.
>>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: Liping Zhang <zl...@gmail.com>
>>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>>> Subject: hbase 0.94.0 failed to individually run test case with
>>>> org.apache.hadoop.hbase.TestZookeeper
>>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>>
>>>>
>>>>
>>>> Hi Ted Yu, Stack and Andrew,
>>>>
>>>> How are thing going? I met some issues when I individually run HBase
>>>> 0.94.0 unit tests, can you help me out?
>>>>
>>>> -------------------------
>>>> *question #1:*
>>>>
>>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that
>>>> it was failed to *individually *run
>>>> org.apache.hadoop.hbase.TestZookeeper and
>>>> org.apache.hadoop.hbase.regionserver.TestHRegion when I individually ran it
>>>> with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion test". It
>>>> seems there was no unit testThe result showed as following:
>>>>
>>>>
>>>> -------------------------------------------------------
>>>> T E S T S
>>>> -------------------------------------------------------
>>>>
>>>> Results :
>>>>
>>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>>
>>>>
>>>> --------------------------
>>>> question #2:*
>>>>
>>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>>> there any command?
>>>>
>>>>
>>>> ----------------------------
>>>> *question #3:*
>>>> I tried individual tests, and found that it didn't run any test case
>>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>>> happens?
>>>> *
>>>> *
>>>> Thanks very much for your answering!
>>>>
>>>> --
>>>> Thanks!
>>>>
>>>> Best Regards,
>>>> Liping Zhang
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Thanks!
>>>>
>>>> Best Regards,
>>>> Liping Zhang(张 莉苹)
>>>>
>>>>
>>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Ted Yu <yu...@gmail.com>.
The following command didn't run any test:
mvn -PlocalTests -Dtest=*TestZookeeper *test
N:
Do you know why ?
On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
> To answer your first question, you need to specify the following:
> mvn test -PlocalTests -Dtest=
>
>
> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> Can you try with 0.94.2 or tip of 0.94 ?
>> 0.94.0 is quite old.
>>
>>
>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>>
>>> Hi hbase deve, QA, Shixing,
>>>
>>> I'll highly appreciate you if you can answer the questions.
>>>
>>>
>>> Hi Shixing,
>>>
>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>> Thanks for your info.
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Liping Zhang <zl...@gmail.com>
>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>> Subject: hbase 0.94.0 failed to individually run test case with
>>> org.apache.hadoop.hbase.TestZookeeper
>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>
>>>
>>>
>>> Hi Ted Yu, Stack and Andrew,
>>>
>>> How are thing going? I met some issues when I individually run HBase
>>> 0.94.0 unit tests, can you help me out?
>>>
>>> -------------------------
>>> *question #1:*
>>>
>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>>> test". It seems there was no unit testThe result showed as following:
>>>
>>> -------------------------------------------------------
>>> T E S T S
>>> -------------------------------------------------------
>>>
>>> Results :
>>>
>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>
>>>
>>> --------------------------
>>> question #2:*
>>>
>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>> there any command?
>>>
>>>
>>> ----------------------------
>>> *question #3:*
>>> I tried individual tests, and found that it didn't run any test case
>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>> happens?*
>>> *
>>> Thanks very much for your answering!
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang
>>>
>>>
>>>
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang(张 莉苹)
>>>
>>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Hi Ted Yu,
Just tried it and update you, it seems "mvn test -PlocalTests -Dtest="
works for "mvn -PlocalTests -Dtest=*TestHRegion *test", but still not work
for "mvn -PlocalTests -Dtest=*TestZookeeper *test".
On Tue, Oct 30, 2012 at 11:43 AM, Ted Yu <yu...@gmail.com> wrote:
> To answer your first question, you need to specify the following:
> mvn test -PlocalTests -Dtest=
>
>
> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> Can you try with 0.94.2 or tip of 0.94 ?
>> 0.94.0 is quite old.
>>
>>
>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>>
>>> Hi hbase deve, QA, Shixing,
>>>
>>> I'll highly appreciate you if you can answer the questions.
>>>
>>>
>>> Hi Shixing,
>>>
>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>> Thanks for your info.
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Liping Zhang <zl...@gmail.com>
>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>> Subject: hbase 0.94.0 failed to individually run test case with
>>> org.apache.hadoop.hbase.TestZookeeper
>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>
>>>
>>>
>>> Hi Ted Yu, Stack and Andrew,
>>>
>>> How are thing going? I met some issues when I individually run HBase
>>> 0.94.0 unit tests, can you help me out?
>>>
>>> -------------------------
>>> *question #1:*
>>>
>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>>> test". It seems there was no unit testThe result showed as following:
>>>
>>> -------------------------------------------------------
>>> T E S T S
>>> -------------------------------------------------------
>>>
>>> Results :
>>>
>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>
>>>
>>> --------------------------
>>> question #2:*
>>>
>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>> there any command?
>>>
>>>
>>> ----------------------------
>>> *question #3:*
>>> I tried individual tests, and found that it didn't run any test case
>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>> happens?*
>>> *
>>> Thanks very much for your answering!
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang
>>>
>>>
>>>
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang(张 莉苹)
>>>
>>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Ted Yu <yu...@gmail.com>.
The following command didn't run any test:
mvn -PlocalTests -Dtest=*TestZookeeper *test
N:
Do you know why ?
On Mon, Oct 29, 2012 at 8:43 PM, Ted Yu <yu...@gmail.com> wrote:
> To answer your first question, you need to specify the following:
> mvn test -PlocalTests -Dtest=
>
>
> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> Can you try with 0.94.2 or tip of 0.94 ?
>> 0.94.0 is quite old.
>>
>>
>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>>
>>> Hi hbase deve, QA, Shixing,
>>>
>>> I'll highly appreciate you if you can answer the questions.
>>>
>>>
>>> Hi Shixing,
>>>
>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>> Thanks for your info.
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Liping Zhang <zl...@gmail.com>
>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>> Subject: hbase 0.94.0 failed to individually run test case with
>>> org.apache.hadoop.hbase.TestZookeeper
>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>
>>>
>>>
>>> Hi Ted Yu, Stack and Andrew,
>>>
>>> How are thing going? I met some issues when I individually run HBase
>>> 0.94.0 unit tests, can you help me out?
>>>
>>> -------------------------
>>> *question #1:*
>>>
>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>>> test". It seems there was no unit testThe result showed as following:
>>>
>>> -------------------------------------------------------
>>> T E S T S
>>> -------------------------------------------------------
>>>
>>> Results :
>>>
>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>
>>>
>>> --------------------------
>>> question #2:*
>>>
>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>> there any command?
>>>
>>>
>>> ----------------------------
>>> *question #3:*
>>> I tried individual tests, and found that it didn't run any test case
>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>> happens?*
>>> *
>>> Thanks very much for your answering!
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang
>>>
>>>
>>>
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang(张 莉苹)
>>>
>>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Hi Ted Yu,
Just tried it and update you, it seems "mvn test -PlocalTests -Dtest="
works for "mvn -PlocalTests -Dtest=*TestHRegion *test", but still not work
for "mvn -PlocalTests -Dtest=*TestZookeeper *test".
On Tue, Oct 30, 2012 at 11:43 AM, Ted Yu <yu...@gmail.com> wrote:
> To answer your first question, you need to specify the following:
> mvn test -PlocalTests -Dtest=
>
>
> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> Can you try with 0.94.2 or tip of 0.94 ?
>> 0.94.0 is quite old.
>>
>>
>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>>
>>> Hi hbase deve, QA, Shixing,
>>>
>>> I'll highly appreciate you if you can answer the questions.
>>>
>>>
>>> Hi Shixing,
>>>
>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>> Thanks for your info.
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Liping Zhang <zl...@gmail.com>
>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>> Subject: hbase 0.94.0 failed to individually run test case with
>>> org.apache.hadoop.hbase.TestZookeeper
>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>
>>>
>>>
>>> Hi Ted Yu, Stack and Andrew,
>>>
>>> How are thing going? I met some issues when I individually run HBase
>>> 0.94.0 unit tests, can you help me out?
>>>
>>> -------------------------
>>> *question #1:*
>>>
>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>>> test". It seems there was no unit testThe result showed as following:
>>>
>>> -------------------------------------------------------
>>> T E S T S
>>> -------------------------------------------------------
>>>
>>> Results :
>>>
>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>
>>>
>>> --------------------------
>>> question #2:*
>>>
>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>> there any command?
>>>
>>>
>>> ----------------------------
>>> *question #3:*
>>> I tried individual tests, and found that it didn't run any test case
>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>> happens?*
>>> *
>>> Thanks very much for your answering!
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang
>>>
>>>
>>>
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang(张 莉苹)
>>>
>>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Hi Ted Yu,
Just tried it and update you, it seems "mvn test -PlocalTests -Dtest="
works for "mvn -PlocalTests -Dtest=*TestHRegion *test", but still not work
for "mvn -PlocalTests -Dtest=*TestZookeeper *test".
On Tue, Oct 30, 2012 at 11:43 AM, Ted Yu <yu...@gmail.com> wrote:
> To answer your first question, you need to specify the following:
> mvn test -PlocalTests -Dtest=
>
>
> On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
>
>> Can you try with 0.94.2 or tip of 0.94 ?
>> 0.94.0 is quite old.
>>
>>
>> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>>
>>> Hi hbase deve, QA, Shixing,
>>>
>>> I'll highly appreciate you if you can answer the questions.
>>>
>>>
>>> Hi Shixing,
>>>
>>> I found in HBASE-6269, you did a full unit tests, but did you try it
>>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>>> Thanks for your info.
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Liping Zhang <zl...@gmail.com>
>>> Date: Tue, Oct 30, 2012 at 11:18 AM
>>> Subject: hbase 0.94.0 failed to individually run test case with
>>> org.apache.hadoop.hbase.TestZookeeper
>>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>>
>>>
>>>
>>> Hi Ted Yu, Stack and Andrew,
>>>
>>> How are thing going? I met some issues when I individually run HBase
>>> 0.94.0 unit tests, can you help me out?
>>>
>>> -------------------------
>>> *question #1:*
>>>
>>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>>> test". It seems there was no unit testThe result showed as following:
>>>
>>> -------------------------------------------------------
>>> T E S T S
>>> -------------------------------------------------------
>>>
>>> Results :
>>>
>>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>>
>>>
>>> --------------------------
>>> question #2:*
>>>
>>> How to skip to some test cases when I run full Hbase unit tests? Is
>>> there any command?
>>>
>>>
>>> ----------------------------
>>> *question #3:*
>>> I tried individual tests, and found that it didn't run any test case
>>> with "mvn -Dtest=*TestHRegion *test", but it can run test cases with
>>> "mvn -Dtest=*TestKeyValue,TestHRegion* test", do you know why it
>>> happens?*
>>> *
>>> Thanks very much for your answering!
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang
>>>
>>>
>>>
>>>
>>> --
>>> Thanks!
>>>
>>> Best Regards,
>>> Liping Zhang(张 莉苹)
>>>
>>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Ted Yu <yu...@gmail.com>.
To answer your first question, you need to specify the following:
mvn test -PlocalTests -Dtest=
On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
> Can you try with 0.94.2 or tip of 0.94 ?
> 0.94.0 is quite old.
>
>
> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>
>> Hi hbase deve, QA, Shixing,
>>
>> I'll highly appreciate you if you can answer the questions.
>>
>>
>> Hi Shixing,
>>
>> I found in HBASE-6269, you did a full unit tests, but did you try it
>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>> Thanks for your info.
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Liping Zhang <zl...@gmail.com>
>> Date: Tue, Oct 30, 2012 at 11:18 AM
>> Subject: hbase 0.94.0 failed to individually run test case with
>> org.apache.hadoop.hbase.TestZookeeper
>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>
>>
>>
>> Hi Ted Yu, Stack and Andrew,
>>
>> How are thing going? I met some issues when I individually run HBase
>> 0.94.0 unit tests, can you help me out?
>>
>> -------------------------
>> *question #1:*
>>
>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>> test". It seems there was no unit testThe result showed as following:
>>
>> -------------------------------------------------------
>> T E S T S
>> -------------------------------------------------------
>>
>> Results :
>>
>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>
>>
>> --------------------------
>> question #2:*
>>
>> How to skip to some test cases when I run full Hbase unit tests? Is there
>> any command?
>>
>>
>> ----------------------------
>> *question #3:*
>> I tried individual tests, and found that it didn't run any test case with
>> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
>> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
>> *
>> Thanks very much for your answering!
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang
>>
>>
>>
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang(张 莉苹)
>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Ted Yu <yu...@gmail.com>.
To answer your first question, you need to specify the following:
mvn test -PlocalTests -Dtest=
On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
> Can you try with 0.94.2 or tip of 0.94 ?
> 0.94.0 is quite old.
>
>
> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>
>> Hi hbase deve, QA, Shixing,
>>
>> I'll highly appreciate you if you can answer the questions.
>>
>>
>> Hi Shixing,
>>
>> I found in HBASE-6269, you did a full unit tests, but did you try it
>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>> Thanks for your info.
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Liping Zhang <zl...@gmail.com>
>> Date: Tue, Oct 30, 2012 at 11:18 AM
>> Subject: hbase 0.94.0 failed to individually run test case with
>> org.apache.hadoop.hbase.TestZookeeper
>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>
>>
>>
>> Hi Ted Yu, Stack and Andrew,
>>
>> How are thing going? I met some issues when I individually run HBase
>> 0.94.0 unit tests, can you help me out?
>>
>> -------------------------
>> *question #1:*
>>
>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>> test". It seems there was no unit testThe result showed as following:
>>
>> -------------------------------------------------------
>> T E S T S
>> -------------------------------------------------------
>>
>> Results :
>>
>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>
>>
>> --------------------------
>> question #2:*
>>
>> How to skip to some test cases when I run full Hbase unit tests? Is there
>> any command?
>>
>>
>> ----------------------------
>> *question #3:*
>> I tried individual tests, and found that it didn't run any test case with
>> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
>> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
>> *
>> Thanks very much for your answering!
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang
>>
>>
>>
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang(张 莉苹)
>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Ted Yu <yu...@gmail.com>.
To answer your first question, you need to specify the following:
mvn test -PlocalTests -Dtest=
On Mon, Oct 29, 2012 at 8:37 PM, Ted Yu <yu...@gmail.com> wrote:
> Can you try with 0.94.2 or tip of 0.94 ?
> 0.94.0 is quite old.
>
>
> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>
>> Hi hbase deve, QA, Shixing,
>>
>> I'll highly appreciate you if you can answer the questions.
>>
>>
>> Hi Shixing,
>>
>> I found in HBASE-6269, you did a full unit tests, but did you try it
>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>> Thanks for your info.
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Liping Zhang <zl...@gmail.com>
>> Date: Tue, Oct 30, 2012 at 11:18 AM
>> Subject: hbase 0.94.0 failed to individually run test case with
>> org.apache.hadoop.hbase.TestZookeeper
>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>
>>
>>
>> Hi Ted Yu, Stack and Andrew,
>>
>> How are thing going? I met some issues when I individually run HBase
>> 0.94.0 unit tests, can you help me out?
>>
>> -------------------------
>> *question #1:*
>>
>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>> test". It seems there was no unit testThe result showed as following:
>>
>> -------------------------------------------------------
>> T E S T S
>> -------------------------------------------------------
>>
>> Results :
>>
>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>
>>
>> --------------------------
>> question #2:*
>>
>> How to skip to some test cases when I run full Hbase unit tests? Is there
>> any command?
>>
>>
>> ----------------------------
>> *question #3:*
>> I tried individual tests, and found that it didn't run any test case with
>> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
>> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
>> *
>> Thanks very much for your answering!
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang
>>
>>
>>
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang(张 莉苹)
>>
>>
>
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Thanks for your quick reply, Ted Yu!:)
Do not have chance to try with 0.94.2, will try it later.
However, what we are using is 0.94.0, did you ever met these issues before
with 0.94.0 release QA?
Ted Yu
11:37 AM (13 minutes ago)
to me, dev, user, issues, paradisehit, stack, apurtell
Can you try with 0.94.2 or tip of 0.94 ?
0.94.0 is quite old.
On Tue, Oct 30, 2012 at 11:37 AM, Ted Yu <yu...@gmail.com> wrote:
> Can you try with 0.94.2 or tip of 0.94 ?
> 0.94.0 is quite old.
>
>
> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>
>> Hi hbase deve, QA, Shixing,
>>
>> I'll highly appreciate you if you can answer the questions.
>>
>>
>> Hi Shixing,
>>
>> I found in HBASE-6269, you did a full unit tests, but did you try it
>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>> Thanks for your info.
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Liping Zhang <zl...@gmail.com>
>> Date: Tue, Oct 30, 2012 at 11:18 AM
>> Subject: hbase 0.94.0 failed to individually run test case with
>> org.apache.hadoop.hbase.TestZookeeper
>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>
>>
>>
>> Hi Ted Yu, Stack and Andrew,
>>
>> How are thing going? I met some issues when I individually run HBase
>> 0.94.0 unit tests, can you help me out?
>>
>> -------------------------
>> *question #1:*
>>
>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>> test". It seems there was no unit testThe result showed as following:
>>
>> -------------------------------------------------------
>> T E S T S
>> -------------------------------------------------------
>>
>> Results :
>>
>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>
>>
>> --------------------------
>> question #2:*
>>
>> How to skip to some test cases when I run full Hbase unit tests? Is there
>> any command?
>>
>>
>> ----------------------------
>> *question #3:*
>> I tried individual tests, and found that it didn't run any test case with
>> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
>> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
>> *
>> Thanks very much for your answering!
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang
>>
>>
>>
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang(张 莉苹)
>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)
Re: hbase 0.94.0 failed to individually run test case with org.apache.hadoop.hbase.TestZookeeper
Posted by Liping Zhang <zl...@gmail.com>.
Thanks for your quick reply, Ted Yu!:)
Do not have chance to try with 0.94.2, will try it later.
However, what we are using is 0.94.0, did you ever met these issues before
with 0.94.0 release QA?
Ted Yu
11:37 AM (13 minutes ago)
to me, dev, user, issues, paradisehit, stack, apurtell
Can you try with 0.94.2 or tip of 0.94 ?
0.94.0 is quite old.
On Tue, Oct 30, 2012 at 11:37 AM, Ted Yu <yu...@gmail.com> wrote:
> Can you try with 0.94.2 or tip of 0.94 ?
> 0.94.0 is quite old.
>
>
> On Mon, Oct 29, 2012 at 8:31 PM, Liping Zhang <zl...@gmail.com> wrote:
>
>> Hi hbase deve, QA, Shixing,
>>
>> I'll highly appreciate you if you can answer the questions.
>>
>>
>> Hi Shixing,
>>
>> I found in HBASE-6269, you did a full unit tests, but did you try it
>> successfully with individually running "mvn -Dtest=*TestHRegion *test"?
>> Thanks for your info.
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Liping Zhang <zl...@gmail.com>
>> Date: Tue, Oct 30, 2012 at 11:18 AM
>> Subject: hbase 0.94.0 failed to individually run test case with
>> org.apache.hadoop.hbase.TestZookeeper
>> To: stack@apache.org, apurtell@apache.org, yuzhihong@gmail.com
>>
>>
>>
>> Hi Ted Yu, Stack and Andrew,
>>
>> How are thing going? I met some issues when I individually run HBase
>> 0.94.0 unit tests, can you help me out?
>>
>> -------------------------
>> *question #1:*
>>
>> I downloaded with Hbase 0.94.0 and run it with unit tests, found that it
>> was failed to *individually *run org.apache.hadoop.hbase.TestZookeeper
>> and org.apache.hadoop.hbase.regionserver.TestHRegion when I individually
>> ran it with "mvn -Dtest=TestZookeeper test" and "mvn -Dtest=TestHRegion
>> test". It seems there was no unit testThe result showed as following:
>>
>> -------------------------------------------------------
>> T E S T S
>> -------------------------------------------------------
>>
>> Results :
>>
>> *Tests run: 0, Failures: 0, Errors: 0, Skipped: 0
>>
>>
>> --------------------------
>> question #2:*
>>
>> How to skip to some test cases when I run full Hbase unit tests? Is there
>> any command?
>>
>>
>> ----------------------------
>> *question #3:*
>> I tried individual tests, and found that it didn't run any test case with
>> "mvn -Dtest=*TestHRegion *test", but it can run test cases with "mvn
>> -Dtest=*TestKeyValue,TestHRegion* test", do you know why it happens?*
>> *
>> Thanks very much for your answering!
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang
>>
>>
>>
>>
>> --
>> Thanks!
>>
>> Best Regards,
>> Liping Zhang(张 莉苹)
>>
>>
>
--
Thanks!
Best Regards,
Liping Zhang(张 莉苹)