You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@httpd.apache.org by Stas Bekman <st...@stason.org> on 2001/05/11 07:26:12 UTC
Re: cvs updates
[crossposting to new-httpd]
On Thu, 10 May 2001, Doug MacEachern wrote:
> On Fri, 11 May 2001, Stas Bekman wrote:
>
> > ./configure --prefix=$HOME/httpd-2.0 --with-mpm=threaded --enable-so
> > creating cache ./config.cache
> > ./configure: line 950: syntax error near unexpected token
> > `APR_SAVE_THE_ENVIRONMENT(CPPFLAGS)'
> > ./configure: line 950: `APR_SAVE_THE_ENVIRONMENT(CPPFLAGS)'
>
> don't have that problem here. might want to try the new-httpd list,
> should probably post your configure args, libtool version, autoconf
> version, etc.
>
> mako:/home/dougm% libtool --version
> ltmain.sh (GNU libtool) 1.3.5 (1.385.2.206 2000/05/27 11:12:27)
> mako:/home/dougm% autoconf --version
> Autoconf version 2.13
* upgraded to libtool 1.3.5, the same error
* autoconf is the same version as yours, no change
* checked out httpd-2.0 from scratch and now it works. I suppose that
'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
the error didn't go away.
Thanks!
_____________________________________________________________________
Stas Bekman JAm_pH -- Just Another mod_perl Hacker
http://stason.org/ mod_perl Guide http://perl.apache.org/guide
mailto:stas@stason.org http://apachetoday.com http://eXtropia.com/
http://singlesheaven.com http://perl.apache.org http://perlmonth.com/
Re: cvs updates
Posted by Cliff Woolley <cl...@yahoo.com>.
On Fri, 11 May 2001, Stas Bekman wrote:
> On Thu, 10 May 2001, Roy T. Fielding wrote:
>
> > > * checked out httpd-2.0 from scratch and now it works. I suppose that
> > > 'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
> > > the error didn't go away.
> > >
> >
> > You probably didn't update srclib/apr first. Any changes to the *.m4 or
> > *.in files won't work until both httpd-2.0 and apr are updated and then
> > a buildconf is run from the top.
>
> That's correct. I've falsely assumed that 'cvs up' in http-2.0, will
> recursively update the apr and apr-utils projects, placed under srclib.
It will if you manually add the appropriate D/ lines to the CVS/Entries
file of the srclib subdirectory after having checked out apr and apr-util
into that location. My httpd-2.0/srclib/CVS/Entries file looks like this:
/.cvsignore/1.5/Thu Mar 2 08:26:18 2000//
/Makefile.in/1.9/Sat Feb 24 19:16:04 2001//
D/pcre////
D/apr////
D/apr-util////
Hope this helps.
--Cliff
--------------------------------------------------------------
Cliff Woolley
cliffwoolley@yahoo.com
Charlottesville, VA
Re: cvs updates
Posted by Cliff Woolley <cl...@yahoo.com>.
On Fri, 11 May 2001, Stas Bekman wrote:
> On Thu, 10 May 2001, Roy T. Fielding wrote:
>
> > > * checked out httpd-2.0 from scratch and now it works. I suppose that
> > > 'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
> > > the error didn't go away.
> > >
> >
> > You probably didn't update srclib/apr first. Any changes to the *.m4 or
> > *.in files won't work until both httpd-2.0 and apr are updated and then
> > a buildconf is run from the top.
>
> That's correct. I've falsely assumed that 'cvs up' in http-2.0, will
> recursively update the apr and apr-utils projects, placed under srclib.
It will if you manually add the appropriate D/ lines to the CVS/Entries
file of the srclib subdirectory after having checked out apr and apr-util
into that location. My httpd-2.0/srclib/CVS/Entries file looks like this:
/.cvsignore/1.5/Thu Mar 2 08:26:18 2000//
/Makefile.in/1.9/Sat Feb 24 19:16:04 2001//
D/pcre////
D/apr////
D/apr-util////
Hope this helps.
--Cliff
--------------------------------------------------------------
Cliff Woolley
cliffwoolley@yahoo.com
Charlottesville, VA
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: cvs updates
Posted by Stas Bekman <st...@stason.org>.
On Thu, 10 May 2001, Roy T. Fielding wrote:
> > * checked out httpd-2.0 from scratch and now it works. I suppose that
> > 'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
> > the error didn't go away.
> >
>
> You probably didn't update srclib/apr first. Any changes to the *.m4 or
> *.in files won't work until both httpd-2.0 and apr are updated and then
> a buildconf is run from the top.
That's correct. I've falsely assumed that 'cvs up' in http-2.0, will
recursively update the apr and apr-utils projects, placed under srclib.
I'll update our dev notes to always make sure to cvs up these two
sub-dirs as well.
Thanks Roy.
_____________________________________________________________________
Stas Bekman JAm_pH -- Just Another mod_perl Hacker
http://stason.org/ mod_perl Guide http://perl.apache.org/guide
mailto:stas@stason.org http://apachetoday.com http://eXtropia.com/
http://singlesheaven.com http://perl.apache.org http://perlmonth.com/
Re: cvs updates
Posted by Stas Bekman <st...@stason.org>.
On Thu, 10 May 2001, Roy T. Fielding wrote:
> > * checked out httpd-2.0 from scratch and now it works. I suppose that
> > 'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
> > the error didn't go away.
> >
>
> You probably didn't update srclib/apr first. Any changes to the *.m4 or
> *.in files won't work until both httpd-2.0 and apr are updated and then
> a buildconf is run from the top.
That's correct. I've falsely assumed that 'cvs up' in http-2.0, will
recursively update the apr and apr-utils projects, placed under srclib.
I'll update our dev notes to always make sure to cvs up these two
sub-dirs as well.
Thanks Roy.
_____________________________________________________________________
Stas Bekman JAm_pH -- Just Another mod_perl Hacker
http://stason.org/ mod_perl Guide http://perl.apache.org/guide
mailto:stas@stason.org http://apachetoday.com http://eXtropia.com/
http://singlesheaven.com http://perl.apache.org http://perlmonth.com/
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: cvs updates
Posted by "Roy T. Fielding" <fi...@ebuilt.com>.
> * checked out httpd-2.0 from scratch and now it works. I suppose that
> 'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
> the error didn't go away.
>
You probably didn't update srclib/apr first. Any changes to the *.m4 or
*.in files won't work until both httpd-2.0 and apr are updated and then
a buildconf is run from the top.
....Roy
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: cvs updates
Posted by "Roy T. Fielding" <fi...@ebuilt.com>.
> * checked out httpd-2.0 from scratch and now it works. I suppose that
> 'make distclean' is not very clean, since with 'cvs up' + 'make distclean'
> the error didn't go away.
>
You probably didn't update srclib/apr first. Any changes to the *.m4 or
*.in files won't work until both httpd-2.0 and apr are updated and then
a buildconf is run from the top.
....Roy