You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@camel.apache.org by Seumas Soltysik <se...@soltysik.com> on 2011/08/14 20:31:00 UTC
Configuring a CXFRS client used in a Camel route with Proxy server
Here is my question: How do I configure a cxfrs client in Camel route
to be able to converse with a proxy server blocking access to a JAXRS
endpoint?
I have done a fair bit of investigation into this and here is what I
have as background information:
I have a route which routes to JAXRS endpoint that looks something
like this:
<!-- Defined the server endpoint to create the cxf-rs consumer -->
<cxf:rsServer id="rsServer" address="http://localhost:9000"
serviceClass
="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService" />
<!-- Defined the client endpoint to create the cxf-rs consumer -->
<cxf:rsClient id="rsClient" address="http://localhost:9002"
serviceClass
="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"/>
<!-- The camel route context -->
<camelContext id="camel" xmlns="http://camel.apache.org/schema/
spring">
<route>
<from uri="cxfrs://bean://rsServer"/>
<to uri="cxfrs://bean://rsClient"/>
</route>
</camelContext>
However, the remote host is blocked by a Proxy server. Therefore I
need to configure the cxfrs producer/client to talk to a Proxy server.
If this was a standalone JAXRS client I would simply add this
configuration element to the spring.xml used to configure the CXF bus
used by the JAXRS client:
<http-conf:conduit name="*.http-conduit">
<http-conf:client ProxyServer="remote_host"
ProxyServerPort="9090"/>
</http-conf:conduit>
However, adding this to the spring config used to initialize the Camel
ApplicationContext has no effect since a default bus is created during
the creation of the rsClient bean which does not have access to any
configuration information in the Camel application context. From the
schema for the cxfrs client, it appears that I can use the bus
attribute to set my own bus(documentation is unclear on this point),
however, this does not provide me with a simple solution as even if I
define my own <cxf:bus> element to inject into the cxfrs client, I
still have to be able to add the policy/config information to the bus
for the client to use. To do this it looks like I would have to create
my own CXF Feature to perform this injection and then set this Feature
on the <cxf:bus> element.
Is there another solution that I am missing to be able to connect a
cxfrs client in a camel route to a proxy server?
Regards,
Seumas
Re: Configuring a CXFRS client used in a Camel route with Proxy server
Posted by Seumas Soltysik <se...@soltysik.com>.
Thanks, I will give it a try and let you know what I find.
Regards,
Seumas
On Aug 15, 2011, at 2:52 AM, Willem Jiang wrote:
> Hi Seumas,
>
> Can you try to change the code of getBus() == null to bus == null ?
> That is how I fix the issue of CXF-3734, as the getBus() will return
> a default bus to use.
>
>
> On 8/15/11 2:29 PM, Seumas Soltysik wrote:
>> Hi Willem,
>> I am using a version of Camel 2.1.x and CXF 2.2.x.
>>
>> I am simply using the CxfRsRouterTest in Camel and modifying the
>> CxfRsSpringRouter.xml file to test the ability to set proxy server
>> values on the HTTP conduit.Adding the import statement as suggested
>> does
>> not seem to help as it creates additional problems, specifically
>> associated with registering the correct DestinationManagers with the
>> Bus. If you add the import statement to this test you will see what
>> I mean.
>>
>> If you look at the CxfRsClientFactoryBeanDefinitionParser in Camel
>> 2.1
>> you will see the following code:
>>
>> public void setApplicationContext(ApplicationContext ctx) throws
>> BeansException {
>> if (getBus() == null) {
>> // Don't relate on the DefaultBus
>> BusFactory factory = new SpringBusFactory();
>> Bus bus = factory.createBus();
>> BusWiringBeanFactoryPostProcessor.updateBusReferencesInContext(bus,
>> ctx);
>> setBus(bus);
>> }
>> }
>>
>> The intent of this code is to add information from the application
>> context used to create the camel route to configure the bus used in
>> the
>> CxfRs client, therefore allowing a user to add Bus configuration
>> code to
>> the camel spring configuration file. The problem is that the call to
>> getBus() does not return null as a default bus has already been
>> injected
>> as a result of an @Resource annotation at the base class level.
>>
>> If I could create a situation where the @Resource annotation was
>> over-ridden and the call to getBus() returned null, then I think all
>> would be well. Of course I am not sure what the side of effect of
>> doing
>> this would be on other code.
>>
>> Regards,
>> Seumas
>>
>> On Aug 14, 2011, at 11:41 PM, Willem Jiang wrote:
>>
>>> Hi Seumas,
>>>
>>> Which version of Camel and CXF are you using?
>>>
>>> I just fixed CXF-3734[1] last week.
>>> You may work around this issue by using the include resource like
>>> this
>>> in you camel route configuration.
>>>
>>> <import resource="classpath:META-INF/cxf/cxf.xml"/>
>>> ...
>>>
>>> [1]https://issues.apache.org/jira/browse/CXF-3734
>>>
>>>
>>> On Mon Aug 15 02:31:00 2011, Seumas Soltysik wrote:
>>>> Here is my question: How do I configure a cxfrs client in Camel
>>>> route to
>>>> be able to converse with a proxy server blocking access to a JAXRS
>>>> endpoint?
>>>>
>>>> I have done a fair bit of investigation into this and here is
>>>> what I
>>>> have as background information:
>>>>
>>>> I have a route which routes to JAXRS endpoint that looks
>>>> something like
>>>> this:
>>>>
>>>>
>>>> <!-- Defined the server endpoint to create the cxf-rs consumer -->
>>>> <cxf:rsServer id="rsServer" address="http://localhost:9000"
>>>> serviceClass
>>>> ="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"
>>>>
>>>> />
>>>>
>>>> <!-- Defined the client endpoint to create the cxf-rs consumer -->
>>>> <cxf:rsClient id="rsClient" address="http://localhost:9002"
>>>> serviceClass
>>>> ="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"/>
>>>>
>>>>
>>>>
>>>> <!-- The camel route context -->
>>>> <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring
>>>> ">
>>>> <route>
>>>> <from uri="cxfrs://bean://rsServer"/>
>>>> <to uri="cxfrs://bean://rsClient"/>
>>>> </route>
>>>> </camelContext>
>>>>
>>>> However, the remote host is blocked by a Proxy server. Therefore
>>>> I need
>>>> to configure the cxfrs producer/client to talk to a Proxy server.
>>>> If
>>>> this was a standalone JAXRS client I would simply add this
>>>> configuration
>>>> element to the spring.xml used to configure the CXF bus used by the
>>>> JAXRS client:
>>>>
>>>> <http-conf:conduit name="*.http-conduit">
>>>> <http-conf:client ProxyServer="remote_host"
>>>> ProxyServerPort="9090"/>
>>>> </http-conf:conduit>
>>>>
>>>> However, adding this to the spring config used to initialize the
>>>> Camel
>>>> ApplicationContext has no effect since a default bus is created
>>>> during
>>>> the creation of the rsClient bean which does not have access to any
>>>> configuration information in the Camel application context. From
>>>> the
>>>> schema for the cxfrs client, it appears that I can use the bus
>>>> attribute
>>>> to set my own bus(documentation is unclear on this point),
>>>> however, this
>>>> does not provide me with a simple solution as even if I define my
>>>> own
>>>> <cxf:bus> element to inject into the cxfrs client, I still have
>>>> to be
>>>> able to add the policy/config information to the bus for the
>>>> client to
>>>> use. To do this it looks like I would have to create my own CXF
>>>> Feature
>>>> to perform this injection and then set this Feature on the
>>>> <cxf:bus>
>>>> element.
>>>>
>>>> Is there another solution that I am missing to be able to connect a
>>>> cxfrs client in a camel route to a proxy server?
>>>>
>>>> Regards,
>>>> Seumas
>>>
>>>
>>>
>>> --
>>> Willem
>>> ----------------------------------
>>> FuseSource
>>> Web: http://www.fusesource.com
>>> Blog: http://willemjiang.blogspot.com (English)
>>> http://jnn.javaeye.com (Chinese)
>>> Twitter: willemjiang
>>> Weibo: willemjiang
>>>
>>> --
>>> Willem
>>> ----------------------------------
>>> FuseSource
>>> Web: http://www.fusesource.com
>>> Blog: http://willemjiang.blogspot.com (English)
>>> http://jnn.javaeye.com (Chinese)
>>> Twitter: willemjiang
>>> Weibo: willemjiang
>>>
>>
>>
>
>
> --
> Willem
> ----------------------------------
> FuseSource
> Web: http://www.fusesource.com
> Blog: http://willemjiang.blogspot.com (English)
> http://jnn.javaeye.com (Chinese)
> Twitter: willemjiang
> Weibo: willemjiang
>
Re: Configuring a CXFRS client used in a Camel route with Proxy server
Posted by Willem Jiang <wi...@gmail.com>.
Hi Seumas,
Can you try to change the code of getBus() == null to bus == null ?
That is how I fix the issue of CXF-3734, as the getBus() will return a
default bus to use.
On 8/15/11 2:29 PM, Seumas Soltysik wrote:
> Hi Willem,
> I am using a version of Camel 2.1.x and CXF 2.2.x.
>
> I am simply using the CxfRsRouterTest in Camel and modifying the
> CxfRsSpringRouter.xml file to test the ability to set proxy server
> values on the HTTP conduit.Adding the import statement as suggested does
> not seem to help as it creates additional problems, specifically
> associated with registering the correct DestinationManagers with the
> Bus. If you add the import statement to this test you will see what I mean.
>
> If you look at the CxfRsClientFactoryBeanDefinitionParser in Camel 2.1
> you will see the following code:
>
> public void setApplicationContext(ApplicationContext ctx) throws
> BeansException {
> if (getBus() == null) {
> // Don't relate on the DefaultBus
> BusFactory factory = new SpringBusFactory();
> Bus bus = factory.createBus();
> BusWiringBeanFactoryPostProcessor.updateBusReferencesInContext(bus, ctx);
> setBus(bus);
> }
> }
>
> The intent of this code is to add information from the application
> context used to create the camel route to configure the bus used in the
> CxfRs client, therefore allowing a user to add Bus configuration code to
> the camel spring configuration file. The problem is that the call to
> getBus() does not return null as a default bus has already been injected
> as a result of an @Resource annotation at the base class level.
>
> If I could create a situation where the @Resource annotation was
> over-ridden and the call to getBus() returned null, then I think all
> would be well. Of course I am not sure what the side of effect of doing
> this would be on other code.
>
> Regards,
> Seumas
>
> On Aug 14, 2011, at 11:41 PM, Willem Jiang wrote:
>
>> Hi Seumas,
>>
>> Which version of Camel and CXF are you using?
>>
>> I just fixed CXF-3734[1] last week.
>> You may work around this issue by using the include resource like this
>> in you camel route configuration.
>>
>> <import resource="classpath:META-INF/cxf/cxf.xml"/>
>> ...
>>
>> [1]https://issues.apache.org/jira/browse/CXF-3734
>>
>>
>> On Mon Aug 15 02:31:00 2011, Seumas Soltysik wrote:
>>> Here is my question: How do I configure a cxfrs client in Camel route to
>>> be able to converse with a proxy server blocking access to a JAXRS
>>> endpoint?
>>>
>>> I have done a fair bit of investigation into this and here is what I
>>> have as background information:
>>>
>>> I have a route which routes to JAXRS endpoint that looks something like
>>> this:
>>>
>>>
>>> <!-- Defined the server endpoint to create the cxf-rs consumer -->
>>> <cxf:rsServer id="rsServer" address="http://localhost:9000"
>>> serviceClass="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"
>>>
>>> />
>>>
>>> <!-- Defined the client endpoint to create the cxf-rs consumer -->
>>> <cxf:rsClient id="rsClient" address="http://localhost:9002"
>>> serviceClass="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"/>
>>>
>>>
>>>
>>> <!-- The camel route context -->
>>> <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
>>> <route>
>>> <from uri="cxfrs://bean://rsServer"/>
>>> <to uri="cxfrs://bean://rsClient"/>
>>> </route>
>>> </camelContext>
>>>
>>> However, the remote host is blocked by a Proxy server. Therefore I need
>>> to configure the cxfrs producer/client to talk to a Proxy server. If
>>> this was a standalone JAXRS client I would simply add this configuration
>>> element to the spring.xml used to configure the CXF bus used by the
>>> JAXRS client:
>>>
>>> <http-conf:conduit name="*.http-conduit">
>>> <http-conf:client ProxyServer="remote_host" ProxyServerPort="9090"/>
>>> </http-conf:conduit>
>>>
>>> However, adding this to the spring config used to initialize the Camel
>>> ApplicationContext has no effect since a default bus is created during
>>> the creation of the rsClient bean which does not have access to any
>>> configuration information in the Camel application context. From the
>>> schema for the cxfrs client, it appears that I can use the bus attribute
>>> to set my own bus(documentation is unclear on this point), however, this
>>> does not provide me with a simple solution as even if I define my own
>>> <cxf:bus> element to inject into the cxfrs client, I still have to be
>>> able to add the policy/config information to the bus for the client to
>>> use. To do this it looks like I would have to create my own CXF Feature
>>> to perform this injection and then set this Feature on the <cxf:bus>
>>> element.
>>>
>>> Is there another solution that I am missing to be able to connect a
>>> cxfrs client in a camel route to a proxy server?
>>>
>>> Regards,
>>> Seumas
>>
>>
>>
>> --
>> Willem
>> ----------------------------------
>> FuseSource
>> Web: http://www.fusesource.com
>> Blog: http://willemjiang.blogspot.com (English)
>> http://jnn.javaeye.com (Chinese)
>> Twitter: willemjiang
>> Weibo: willemjiang
>>
>> --
>> Willem
>> ----------------------------------
>> FuseSource
>> Web: http://www.fusesource.com
>> Blog: http://willemjiang.blogspot.com (English)
>> http://jnn.javaeye.com (Chinese)
>> Twitter: willemjiang
>> Weibo: willemjiang
>>
>
>
--
Willem
----------------------------------
FuseSource
Web: http://www.fusesource.com
Blog: http://willemjiang.blogspot.com (English)
http://jnn.javaeye.com (Chinese)
Twitter: willemjiang
Weibo: willemjiang
Re: Configuring a CXFRS client used in a Camel route with Proxy server
Posted by Seumas Soltysik <se...@soltysik.com>.
Hi Willem,
I am using a version of Camel 2.1.x and CXF 2.2.x.
I am simply using the CxfRsRouterTest in Camel and modifying the
CxfRsSpringRouter.xml file to test the ability to set proxy server
values on the HTTP conduit.Adding the import statement as suggested
does not seem to help as it creates additional problems, specifically
associated with registering the correct DestinationManagers with the
Bus. If you add the import statement to this test you will see what I
mean.
If you look at the CxfRsClientFactoryBeanDefinitionParser in Camel 2.1
you will see the following code:
public void setApplicationContext(ApplicationContext ctx)
throws BeansException {
if (getBus() == null) {
// Don't relate on the DefaultBus
BusFactory factory = new SpringBusFactory();
Bus bus = factory.createBus();
BusWiringBeanFactoryPostProcessor.updateBusReferencesInContext(bus,
ctx);
setBus(bus);
}
}
The intent of this code is to add information from the application
context used to create the camel route to configure the bus used in
the CxfRs client, therefore allowing a user to add Bus configuration
code to the camel spring configuration file. The problem is that the
call to getBus() does not return null as a default bus has already
been injected as a result of an @Resource annotation at the base class
level.
If I could create a situation where the @Resource annotation was over-
ridden and the call to getBus() returned null, then I think all would
be well. Of course I am not sure what the side of effect of doing this
would be on other code.
Regards,
Seumas
On Aug 14, 2011, at 11:41 PM, Willem Jiang wrote:
> Hi Seumas,
>
> Which version of Camel and CXF are you using?
>
> I just fixed CXF-3734[1] last week.
> You may work around this issue by using the include resource like this
> in you camel route configuration.
>
> <import resource="classpath:META-INF/cxf/cxf.xml"/>
> ...
>
> [1]https://issues.apache.org/jira/browse/CXF-3734
>
>
> On Mon Aug 15 02:31:00 2011, Seumas Soltysik wrote:
>> Here is my question: How do I configure a cxfrs client in Camel
>> route to
>> be able to converse with a proxy server blocking access to a JAXRS
>> endpoint?
>>
>> I have done a fair bit of investigation into this and here is what I
>> have as background information:
>>
>> I have a route which routes to JAXRS endpoint that looks something
>> like
>> this:
>>
>>
>> <!-- Defined the server endpoint to create the cxf-rs consumer -->
>> <cxf:rsServer id="rsServer" address="http://localhost:9000"
>> serviceClass
>> ="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"
>> />
>>
>> <!-- Defined the client endpoint to create the cxf-rs consumer -->
>> <cxf:rsClient id="rsClient" address="http://localhost:9002"
>> serviceClass
>> ="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"/>
>>
>>
>> <!-- The camel route context -->
>> <camelContext id="camel" xmlns="http://camel.apache.org/schema/
>> spring">
>> <route>
>> <from uri="cxfrs://bean://rsServer"/>
>> <to uri="cxfrs://bean://rsClient"/>
>> </route>
>> </camelContext>
>>
>> However, the remote host is blocked by a Proxy server. Therefore I
>> need
>> to configure the cxfrs producer/client to talk to a Proxy server. If
>> this was a standalone JAXRS client I would simply add this
>> configuration
>> element to the spring.xml used to configure the CXF bus used by the
>> JAXRS client:
>>
>> <http-conf:conduit name="*.http-conduit">
>> <http-conf:client ProxyServer="remote_host" ProxyServerPort="9090"/>
>> </http-conf:conduit>
>>
>> However, adding this to the spring config used to initialize the
>> Camel
>> ApplicationContext has no effect since a default bus is created
>> during
>> the creation of the rsClient bean which does not have access to any
>> configuration information in the Camel application context. From the
>> schema for the cxfrs client, it appears that I can use the bus
>> attribute
>> to set my own bus(documentation is unclear on this point), however,
>> this
>> does not provide me with a simple solution as even if I define my own
>> <cxf:bus> element to inject into the cxfrs client, I still have to be
>> able to add the policy/config information to the bus for the client
>> to
>> use. To do this it looks like I would have to create my own CXF
>> Feature
>> to perform this injection and then set this Feature on the <cxf:bus>
>> element.
>>
>> Is there another solution that I am missing to be able to connect a
>> cxfrs client in a camel route to a proxy server?
>>
>> Regards,
>> Seumas
>
>
>
> --
> Willem
> ----------------------------------
> FuseSource
> Web: http://www.fusesource.com
> Blog: http://willemjiang.blogspot.com (English)
> http://jnn.javaeye.com (Chinese)
> Twitter: willemjiang
> Weibo: willemjiang
>
> --
> Willem
> ----------------------------------
> FuseSource
> Web: http://www.fusesource.com
> Blog: http://willemjiang.blogspot.com (English)
> http://jnn.javaeye.com (Chinese)
> Twitter: willemjiang
> Weibo: willemjiang
>
Re: Configuring a CXFRS client used in a Camel route with Proxy server
Posted by Willem Jiang <wi...@gmail.com>.
Hi Seumas,
Which version of Camel and CXF are you using?
I just fixed CXF-3734[1] last week.
You may work around this issue by using the include resource like this
in you camel route configuration.
<import resource="classpath:META-INF/cxf/cxf.xml"/>
...
[1]https://issues.apache.org/jira/browse/CXF-3734
On Mon Aug 15 02:31:00 2011, Seumas Soltysik wrote:
> Here is my question: How do I configure a cxfrs client in Camel route to
> be able to converse with a proxy server blocking access to a JAXRS
> endpoint?
>
> I have done a fair bit of investigation into this and here is what I
> have as background information:
>
> I have a route which routes to JAXRS endpoint that looks something like
> this:
>
>
> <!-- Defined the server endpoint to create the cxf-rs consumer -->
> <cxf:rsServer id="rsServer" address="http://localhost:9000"
> serviceClass="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"
> />
>
> <!-- Defined the client endpoint to create the cxf-rs consumer -->
> <cxf:rsClient id="rsClient" address="http://localhost:9002"
> serviceClass="org.apache.camel.component.cxf.jaxrs.testbean.CustomerService"/>
>
>
> <!-- The camel route context -->
> <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
> <route>
> <from uri="cxfrs://bean://rsServer"/>
> <to uri="cxfrs://bean://rsClient"/>
> </route>
> </camelContext>
>
> However, the remote host is blocked by a Proxy server. Therefore I need
> to configure the cxfrs producer/client to talk to a Proxy server. If
> this was a standalone JAXRS client I would simply add this configuration
> element to the spring.xml used to configure the CXF bus used by the
> JAXRS client:
>
> <http-conf:conduit name="*.http-conduit">
> <http-conf:client ProxyServer="remote_host" ProxyServerPort="9090"/>
> </http-conf:conduit>
>
> However, adding this to the spring config used to initialize the Camel
> ApplicationContext has no effect since a default bus is created during
> the creation of the rsClient bean which does not have access to any
> configuration information in the Camel application context. From the
> schema for the cxfrs client, it appears that I can use the bus attribute
> to set my own bus(documentation is unclear on this point), however, this
> does not provide me with a simple solution as even if I define my own
> <cxf:bus> element to inject into the cxfrs client, I still have to be
> able to add the policy/config information to the bus for the client to
> use. To do this it looks like I would have to create my own CXF Feature
> to perform this injection and then set this Feature on the <cxf:bus>
> element.
>
> Is there another solution that I am missing to be able to connect a
> cxfrs client in a camel route to a proxy server?
>
> Regards,
> Seumas
--
Willem
----------------------------------
FuseSource
Web: http://www.fusesource.com
Blog: http://willemjiang.blogspot.com (English)
http://jnn.javaeye.com (Chinese)
Twitter: willemjiang
Weibo: willemjiang
--
Willem
----------------------------------
FuseSource
Web: http://www.fusesource.com
Blog: http://willemjiang.blogspot.com (English)
http://jnn.javaeye.com (Chinese)
Twitter: willemjiang
Weibo: willemjiang