You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@cassandra.apache.org by "Michael Semb Wever (Jira)" <ji...@apache.org> on 2021/01/21 13:49:02 UTC
[jira] [Updated] (CASSANDRA-16397) Running python dtest with
--keep-failed-test-dir causes ERROR for SKIP tests
[ https://issues.apache.org/jira/browse/CASSANDRA-16397?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Michael Semb Wever updated CASSANDRA-16397:
-------------------------------------------
Bug Category: Parent values: Correctness(12982)Level 1 values: Test Failure(12990)
Complexity: Normal
Discovered By: User Report
Severity: Normal
Status: Open (was: Triage Needed)
This is a new failure…
{code}
E AttributeError: 'Function' object has no attribute 'rep_call'dtest_setup.py:351: AttributeError
{code}
> Running python dtest with --keep-failed-test-dir causes ERROR for SKIP tests
> ----------------------------------------------------------------------------
>
> Key: CASSANDRA-16397
> URL: https://issues.apache.org/jira/browse/CASSANDRA-16397
> Project: Cassandra
> Issue Type: Bug
> Components: Test/dtest/python
> Reporter: Tomasz Lasica
> Priority: Normal
>
> There is a new flag, added in CASSANDRA-16070: "--keep-failed-test-dir".
> In some cases (I am not sure if always),
> when this flag is set and when test is SKIP-ed it will cause test ERROR.
>
> Good run (without --keep-failed-test-dir)
> {code:java}
> pytest --cassandra-dir=/home/tomek/repos/apache/cassandra client_network_stop_start_test.py
> ===================================================================================== test session starts =====================================================================================
> platform linux -- Python 3.6.12, pytest-3.6.4, py-1.10.0, pluggy-0.7.1
> rootdir: /home/tomek/repos/tlasica/cassandra-dtest, inifile: pytest.ini
> plugins: timeout-1.4.2, flaky-3.7.0
> timeout: 900.0s
> timeout method: signal
> timeout func_only: False
> collected 3 items client_network_stop_start_test.py .ss [100%]
> ===Flaky Test Report===test_defaults passed 1 out of the required 1 times. Success!===End Flaky Test Report=============================================================================== 1 passed, 2 skipped in 11.25 seconds ============================================================================={code}
> and bad one (with flag):
> {code:java}
> pytest --keep-failed-test-dir --cassandra-dir=/home/tomek/repos/apache/cassandra client_network_stop_start_test.py
> ===================================================================================== test session starts =====================================================================================
> platform linux -- Python 3.6.12, pytest-3.6.4, py-1.10.0, pluggy-0.7.1
> rootdir: /home/tomek/repos/tlasica/cassandra-dtest, inifile: pytest.ini
> plugins: timeout-1.4.2, flaky-3.7.0
> timeout: 900.0s
> timeout method: signal
> timeout func_only: False
> collected 3 items client_network_stop_start_test.py .sEsE [100%]=========================================================================================== ERRORS ============================================================================================
> _____________________________________________________________ ERROR at teardown of TestClientNetworkStopStart.test_hsha_defaults ______________________________________________________________request = <SubRequest 'fixture_dtest_setup' for <Function 'test_hsha_defaults'>>, dtest_config = <dtest_config.DTestConfig object at 0x7fd313af9908>
> fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at 0x7fd313263048>, fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
> fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at 0x7fd313b15488> @pytest.fixture(scope='function', autouse=False)
> def fixture_dtest_setup(request,
> dtest_config,
> fixture_dtest_setup_overrides,
> fixture_logging_setup,
> fixture_dtest_cluster_name,
> fixture_dtest_create_cluster_func):
> if running_in_docker():
> cleanup_docker_environment_before_test_execution()
>
> # do all of our setup operations to get the enviornment ready for the actual test
> # to run (e.g. bring up a cluster with the necessary config, populate variables, etc)
> initial_environment = copy.deepcopy(os.environ)
> dtest_setup = DTestSetup(dtest_config=dtest_config,
> setup_overrides=fixture_dtest_setup_overrides,
> cluster_name=fixture_dtest_cluster_name)
> dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
>
> if not dtest_config.disable_active_log_watching:
> dtest_setup.begin_active_log_watch()
>
> # at this point we're done with our setup operations in this fixture
> # yield to allow the actual test to run
> yield dtest_setup
>
> # phew! we're back after executing the test, now we need to do
> # all of our teardown and cleanup operations
>
> reset_environment_vars(initial_environment)
> dtest_setup.jvm_args = []
>
> for con in dtest_setup.connections:
> con.cluster.shutdown()
> dtest_setup.connections = []
>
> failed = False
> try:
> if not dtest_setup.allow_log_errors:
> errors = check_logs_for_errors(dtest_setup)
> if len(errors) > 0:
> failed = True
> pytest.fail(msg='Unexpected error found in node logs (see stdout for full details). Errors: [{errors}]'
> .format(errors=str.join(", ", errors)), pytrace=False)
> finally:
> try:
> # save the logs for inspection
> if failed or not dtest_config.delete_logs:
> copy_logs(request, dtest_setup.cluster)
> except Exception as e:
> logger.error("Error saving log:", str(e))
> finally:
> > dtest_setup.cleanup_cluster(request)conftest.py:352:
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _self = <dtest_setup.DTestSetup object at 0x7fd313adc898>, request = <SubRequest 'fixture_dtest_setup' for <Function 'test_hsha_defaults'>> def cleanup_cluster(self, request=None):
> with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> > if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and request and request.node.rep_call.failed):
> E AttributeError: 'Function' object has no attribute 'rep_call'dtest_setup.py:351: AttributeError
> ------------------------------------------------------------------------------------ Captured stdout setup ------------------------------------------------------------------------------------
> 17:18:59,827 ccm DEBUG Log-watching thread starting.
> ------------------------------------------------------------------------------------- Captured log setup --------------------------------------------------------------------------------------
> 17:18:59,735 conftest INFO Starting execution of test_hsha_defaults at 2021-01-20 17:18:59.735191
> 17:18:59,736 dtest_setup INFO cluster ccm directory: /tmp/dtest-10reduiu
> ---------------------------------------------------------------------------------- Captured stdout teardown -----------------------------------------------------------------------------------_____________________________________________________________ ERROR at teardown of TestClientNetworkStopStart.test_hsha_with_ssl ______________________________________________________________request = <SubRequest 'fixture_dtest_setup' for <Function 'test_hsha_with_ssl'>>, dtest_config = <dtest_config.DTestConfig object at 0x7fd313af9908>
> fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at 0x7fd31301f5c0>, fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
> fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at 0x7fd313b15488> @pytest.fixture(scope='function', autouse=False)
> def fixture_dtest_setup(request,
> dtest_config,
> fixture_dtest_setup_overrides,
> fixture_logging_setup,
> fixture_dtest_cluster_name,
> fixture_dtest_create_cluster_func):
> if running_in_docker():
> cleanup_docker_environment_before_test_execution()
>
> # do all of our setup operations to get the enviornment ready for the actual test
> # to run (e.g. bring up a cluster with the necessary config, populate variables, etc)
> initial_environment = copy.deepcopy(os.environ)
> dtest_setup = DTestSetup(dtest_config=dtest_config,
> setup_overrides=fixture_dtest_setup_overrides,
> cluster_name=fixture_dtest_cluster_name)
> dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
>
> if not dtest_config.disable_active_log_watching:
> dtest_setup.begin_active_log_watch()
>
> # at this point we're done with our setup operations in this fixture
> # yield to allow the actual test to run
> yield dtest_setup
>
> # phew! we're back after executing the test, now we need to do
> # all of our teardown and cleanup operations
>
> reset_environment_vars(initial_environment)
> dtest_setup.jvm_args = []
>
> for con in dtest_setup.connections:
> con.cluster.shutdown()
> dtest_setup.connections = []
>
> failed = False
> try:
> if not dtest_setup.allow_log_errors:
> errors = check_logs_for_errors(dtest_setup)
> if len(errors) > 0:
> failed = True
> pytest.fail(msg='Unexpected error found in node logs (see stdout for full details). Errors: [{errors}]'
> .format(errors=str.join(", ", errors)), pytrace=False)
> finally:
> try:
> # save the logs for inspection
> if failed or not dtest_config.delete_logs:
> copy_logs(request, dtest_setup.cluster)
> except Exception as e:
> logger.error("Error saving log:", str(e))
> finally:
> > dtest_setup.cleanup_cluster(request)conftest.py:352:
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _self = <dtest_setup.DTestSetup object at 0x7fd31301f2b0>, request = <SubRequest 'fixture_dtest_setup' for <Function 'test_hsha_with_ssl'>> def cleanup_cluster(self, request=None):
> with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> > if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and request and request.node.rep_call.failed):
> E AttributeError: 'Function' object has no attribute 'rep_call'dtest_setup.py:351: AttributeError
> ------------------------------------------------------------------------------------ Captured stdout setup ------------------------------------------------------------------------------------
> 17:19:00,1 ccm DEBUG Log-watching thread starting.
> ------------------------------------------------------------------------------------- Captured log setup --------------------------------------------------------------------------------------
> 17:18:59,922 conftest INFO Starting execution of test_hsha_with_ssl at 2021-01-20 17:18:59.922782
> 17:18:59,923 dtest_setup INFO cluster ccm directory: /tmp/dtest-zlpb7lfk
> ===Flaky Test Report===test_defaults passed 1 out of the required 1 times. Success!===End Flaky Test Report===
> ======================================================================== 1 passed, 2 skipped, 2 error in 12.22 seconds ======================================================================== {code}
>
--
This message was sent by Atlassian Jira
(v8.3.4#803005)
---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscribe@cassandra.apache.org
For additional commands, e-mail: commits-help@cassandra.apache.org