You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@spamassassin.apache.org by km...@apache.org on 2018/09/16 14:36:13 UTC
svn commit: r1841017 [17/17] - in /spamassassin/site/full/3.4.x: ./ doc/
Added: spamassassin/site/full/3.4.x/doc/spamd.txt
URL: http://svn.apache.org/viewvc/spamassassin/site/full/3.4.x/doc/spamd.txt?rev=1841017&view=auto
==============================================================================
--- spamassassin/site/full/3.4.x/doc/spamd.txt (added)
+++ spamassassin/site/full/3.4.x/doc/spamd.txt Sun Sep 16 14:36:10 2018
@@ -0,0 +1,578 @@
+NAME
+ spamd - daemonized version of spamassassin
+
+SYNOPSIS
+ spamd [options]
+
+ Options:
+
+ -l, --allow-tell Allow learning/reporting
+ -c, --create-prefs Create user preferences files
+ -C path, --configpath=path Path for default config files
+ --siteconfigpath=path Path for site configs
+ --cf='config line' Additional line of configuration
+ -d, --daemonize Daemonize
+ -h, --help Print usage message
+ -i [ip_or_name[:port]], --listen=[ip_or_name[:port]] Listen on IP addr and port
+ -p port, --port=port Listen on specified port, may be overridden by -i
+ -4, --ipv4-only, --ipv4 Use IPv4 where applicable, disables IPv6
+ -6 Use IPv6 where applicable, disables IPv4
+ -A host,..., --allowed-ips=..,.. Restrict to IP addresses which can connect
+ -m num, --max-children=num Allow maximum num children
+ --min-children=num Allow minimum num children
+ --min-spare=num Lower limit for number of spare children
+ --max-spare=num Upper limit for number of spare children
+ --max-conn-per-child=num Maximum connections accepted by child
+ before it is respawned
+ --round-robin Use traditional prefork algorithm
+ --timeout-tcp=secs Connection timeout for client headers
+ --timeout-child=secs Connection timeout for message checks
+ -q, --sql-config Enable SQL config (needs -x)
+ -Q, --setuid-with-sql Enable SQL config (needs -x,
+ enables use of -H)
+ --ldap-config Enable LDAP config (needs -x)
+ --setuid-with-ldap Enable LDAP config (needs -x,
+ enables use of -H)
+ --virtual-config-dir=dir Enable pattern based Virtual configs
+ (needs -x)
+ -r pidfile, --pidfile Write the process id to pidfile
+ -s facility, --syslog=facility Specify the syslog facility
+ --syslog-socket=type How to connect to syslogd
+ --log-timestamp-fmt=fmt strftime(3) format for timestamps, may be
+ empty to disable timestamps, or 'default'
+ -u username, --username=username Run as username
+ -g groupname, --groupname=groupname Run as groupname
+ -v, --vpopmail Enable vpopmail config
+ -x, --nouser-config Disable user config files
+ --auth-ident Use ident to identify spamc user (deprecated)
+ --ident-timeout=timeout Timeout for ident connections
+ -D, --debug[=areas] Print debugging messages (for areas)
+ -L, --local Use local tests only (no DNS)
+ -P, --paranoid Die upon user errors
+ -H [dir], --helper-home-dir[=dir] Specify a different HOME directory
+ --ssl Enable SSL on TCP connections
+ --ssl-port port Override --port setting for SSL connections
+ --server-key keyfile Specify an SSL keyfile
+ --server-cert certfile Specify an SSL certificate
+ --socketpath=path Listen on a given UNIX domain socket
+ --socketowner=name Set UNIX domain socket file's owner
+ --socketgroup=name Set UNIX domain socket file's group
+ --socketmode=mode Set UNIX domain socket file's mode
+ --timing Enable timing and logging
+ -V, --version Print version and exit
+
+ The --listen option (or -i) may be specified multiple times, its syntax
+ is: [ ssl: ] [ host-name-or-IP-address ] [ : port ] or an absolute path
+ (filename) of a Unix socket. If port is omitted it defaults to --port or
+ to 783. Option --ssl implies a prefix 'ssl:'. An IPv6 address should be
+ enclosed in square brackets, e.g. [::1]:783, an IPv4 address may be but
+ need not be enclosed in square brackets. An asterisk '*' in place of a
+ hostname implies an unspecified address, ('0.0.0.0' or '::'), i.e. it
+ binds to all interfaces. An empty option value implies '*'. A default is
+ '--listen localhost', which binds to a loopback interface only.
+
+DESCRIPTION
+ The purpose of this program is to provide a daemonized version of the
+ spamassassin executable. The goal is improving throughput performance
+ for automated mail checking.
+
+ This is intended to be used alongside "spamc", a fast, low-overhead C
+ client program.
+
+ See the README file in the "spamd" directory of the SpamAssassin
+ distribution for more details.
+
+ Note: Although "spamd" will check per-user config files for every
+ message, any changes to the system-wide config files will require either
+ restarting spamd or forcing it to reload itself via SIGHUP for the
+ changes to take effect.
+
+ Note: If "spamd" receives a SIGHUP, it internally reloads itself, which
+ means that it will change its pid and might not restart at all if its
+ environment changed (ie. if it can't change back into its own
+ directory). If you plan to use SIGHUP, you should always start "spamd"
+ with the -r switch to know its current pid.
+
+OPTIONS
+ Options of the long form can be shortened as long as they remain
+ unambiguous. (i.e. --dae can be used instead of --daemonize) Also,
+ boolean options (like --user-config) can be negated by adding *no*
+ (--nouser-config), however, this is usually unnecessary.
+
+ -l, --allow-tell
+ Allow learning and forgetting (to a local Bayes database), reporting
+ and revoking (to a remote database) by spamd. The client issues a
+ TELL command to tell what type of message is being processed and
+ whether local (learn/forget) or remote (report/revoke) databases
+ should be updated.
+
+ Note that spamd always trusts the username passed in (unless
+ --auth-ident is used) so clients could maliciously learn messages
+ for other users. (This is not ususally a concern with an SQL Bayes
+ store as users will typically have read-write access directly to the
+ database, and can also use "sa-learn" with the -u option to achieve
+ the same result.)
+
+ -c, --create-prefs
+ Create user preferences files if they don't exist (default: don't).
+
+ -C *path*, --configpath=*path*
+ Use the specified path for locating the distributed configuration
+ files. Ignore the default directories (usually
+ "/usr/share/spamassassin" or similar).
+
+ --siteconfigpath=*path*
+ Use the specified path for locating site-specific configuration
+ files. Ignore the default directories (usually
+ "/etc/mail/spamassassin" or similar).
+
+ --cf='config line'
+ Add additional lines of configuration directly from the
+ command-line, parsed after the configuration files are read.
+ Multiple --cf arguments can be used, and each will be considered a
+ separate line of configuration.
+
+ -d, --daemonize
+ Detach from starting process and run in background (daemonize).
+
+ -h, --help
+ Print a brief help message, then exit without further action.
+
+ -V, --version
+ Print version information, then exit without further action.
+
+ -i [*ipaddress*[:<port>]], --listen[=*ipaddress*[:<port>]]
+ Additional alias names for this option are --listen-ip and
+ --ip-address. Tells spamd to listen on the specified IP address,
+ defaults to a loopback interface, i.e. "--listen localhost"). If no
+ value is specified after the switch, or if an asterisk '*' stands in
+ place of an <ipaddress>, spamd will listen on all interfaces - this
+ is equivalent to address '0.0.0.0' for IPv4 and to '::' for IPv6.
+ You can also use a valid hostname which will make spamd listen on
+ all addresses that a name resolves to. The option may be specified
+ multiple times. See also options -4 and -6 for restricting address
+ family to IPv4 or to IPv6. If a port is specified it overrides for
+ this socket the global --port (and --ssl-port) setting. An IPv6
+ addresses should be enclosed in square brackets, e.g. [::1]:783. For
+ compatibility square brackets on an IPv6 address may be omitted if a
+ port number specification is also omitted.
+
+ -p *port*, --port=*port*
+ Optionally specifies the port number for the server to listen on
+ (default: 783).
+
+ If the --ssl switch is used, and --ssl-port is not supplied, then
+ this port will be used to accept SSL connections instead of
+ unencrypted connections. If the --ssl switch is used, and --ssl-port
+ is set, then unencrypted connections will be accepted on the --port
+ at the same time as encrypted connections are accepted at
+ --ssl-port.
+
+ -q, --sql-config
+ Turn on SQL lookups even when per-user config files have been
+ disabled with -x. this is useful for spamd hosts which don't have
+ user's home directories but do want to load user preferences from an
+ SQL database.
+
+ If your spamc client does not support sending the "User:" header,
+ like "exiscan", then the SQL username used will always be nobody.
+
+ This inhibits the setuid() behavior, so the "-u" option is required.
+ If you want the setuid() behaviour, use "-Q" or "--setuid-with-sql"
+ instead.
+
+ --ldap-config
+ Turn on LDAP lookups. This is completely analog to "--sql-config",
+ only it is using an LDAP server.
+
+ Like "--sql-config", this disables the setuid behavior, and requires
+ "-u". If you want it, use "--setuid-with-ldap" instead.
+
+ -Q, --setuid-with-sql
+ Turn on SQL lookups even when per-user config files have been
+ disabled with -x and also setuid to the user. This is useful for
+ spamd hosts which want to load user preferences from an SQL database
+ but also wish to support the use of -H (Helper home directories.)
+
+ --setuid-with-ldap
+ Turn on LDAP lookups even when per-user config files have been
+ disabled with -x and also setuid to the user. This is again
+ completely analog to "--setuid-with-sql", only it is using an LDAP
+ server.
+
+ --virtual-config-dir=*pattern*
+ This option specifies where per-user preferences can be found for
+ virtual users, for the -x switch. The *pattern* is used as a base
+ pattern for the directory name. Any of the following escapes can be
+ used:
+
+ %u -- replaced with the full name of the current user, as sent by
+ spamc.
+ %l -- replaced with the 'local part' of the current username. In
+ other words, if the username is an email address, this is the part
+ before the "@" sign.
+ %d -- replaced with the 'domain' of the current username. In other
+ words, if the username is an email address, this is the part after
+ the "@" sign.
+ %x -- replaced with the full name of the current user, as sent by
+ spamc. If the resulting config directory does not exist, replace
+ with the domain part to use a domain-wide default.
+ %% -- replaced with a single percent sign (%).
+
+ So for example, if "/vhome/users/%u/spamassassin" is specified, and
+ spamc sends a virtual username of "jm@example.com", the directory
+ "/vhome/users/jm@example.com/spamassassin" will be used.
+
+ The set of characters allowed in the virtual username for this path
+ are restricted to:
+
+ A-Z a-z 0-9 - + _ . , @ =
+
+ All others will be replaced by underscores ("_").
+
+ This path must be a writable directory. It will be created if it
+ does not already exist. If a file called user_prefs exists in this
+ directory (note: not in a ".spamassassin" subdirectory!), it will be
+ loaded as the user's preferences. The Bayes databases for that user
+ will be stored in this directory.
+
+ Note that this requires that -x is used, and cannot be combined with
+ SQL- or LDAP-based configuration.
+
+ The pattern must expand to an absolute directory when spamd is
+ running daemonized (-d).
+
+ Currently, use of this without -u is not supported. This inhibits
+ setuid.
+
+ -r *pidfile*, --pidfile=*pidfile*
+ Write the process ID of the spamd parent to the file specified by
+ *pidfile*. The file will be unlinked when the parent exits. Note
+ that when running with the -u option, the file must be writable by
+ that user.
+
+ -v, --vpopmail
+ Enable vpopmail config. If specified with with -u set to the
+ vpopmail user, this allows spamd to lookup/create user_prefs in the
+ vpopmail user's own maildir. This option is useful for vpopmail
+ virtual users who do not have an entry in the system /etc/passwd
+ file.
+
+ Currently, use of this without -u is not supported. This inhibits
+ setuid.
+
+ -s *facility*, --syslog=*facility*
+ Specify the syslog facility to use (default: mail). If "stderr" is
+ specified, output will be written to stderr. (This is useful if
+ you're running "spamd" under the "daemontools" package.) With a
+ *facility* of "file", all output goes to spamd.log. *facility* is
+ interpreted as a file name to log to if it contains any characters
+ except a-z and 0-9. "null" disables logging completely (used
+ internally).
+
+ Examples: spamd -s mail # use syslog, facility mail (default) spamd
+ -s ./mail # log to file ./mail spamd -s stderr 2>/dev/null # log to
+ stderr, throw messages away spamd -s null # the same as above spamd
+ -s file # log to file ./spamd.log spamd -s /var/log/spamd.log # log
+ to file /var/log/spamd.log
+
+ If logging to a file is enabled and that log file is rotated, the
+ spamd server must be restarted with a SIGHUP. (If the log file is
+ just truncated, this is not needed but still recommended.)
+
+ Note that logging to a file does not use locking, so you cannot
+ intermix logging from spamd and other processes into the same file.
+ If you want to mix logging like this, use syslog instead.
+
+ If you use syslog logging, it is essential to send a SIGHUP to the
+ spamd daemon when you restart the syslogd daemon. (This is due to a
+ shortcoming in Perl's syslog handling, where the disappearance of
+ the connection to the syslogd is considered a fatal error.)
+
+ --syslog-socket=*type*
+ Specify how spamd should send messages to syslogd. The *type* can be
+ any of the socket types or logging mechanisms as accepted by the
+ subroutine Sys::Syslog::setlogsock(). Depending on a version of
+ Sys::Syslog and on the underlying operating system, one of the
+ following values (or their subset) can be used: "native",
+ "eventlog", "tcp", "udp", "inet", "unix", "stream", "pipe", or
+ "console". The value "eventlog" is specific to Win32 events logger
+ and requires a perl module Win32::EventLog to be installed. For more
+ information please consult the Sys::Syslog documentation.
+
+ A historical setting --syslog-socket=none is mapped to
+ --syslog=stderr.
+
+ A default for Windows platforms is "none", otherwise the default is
+ to try "unix" first, falling back to "inet" if perl detects errors
+ in its "unix" support.
+
+ Some platforms, or versions of perl, are shipped with old or
+ dysfunctional versions of the Sys::Syslog module which do not
+ support some socket types, so you may need to set this option
+ explicitly. If you get error messages regarding __PATH_LOG or
+ similar spamd, try changing this setting.
+
+ The socket types "file" is used internally and should not be
+ specified. Use the "-s" switch instead.
+
+ --log-timestamp-fmt=*format*
+ The --log-timestamp-fmt option can provide a POSIX strftime(3)
+ format for timestamps included in each logged message. Each logger
+ (stderr, file, syslog) has its own default value for a timestamp
+ format, which applies when --log-timestamp-fmt option is not given,
+ or with --log-timestamp-fmt=default . Timestamps can be turned off
+ by specifying an empty string with this option, e.g.
+ --log-timestamp-fmt='' or just --log-timestamp-fmt= . Typical use:
+ --log-timestamp-fmt='%a %b %e %H:%M:%S %Y' (provides localized
+ weekday and month names in the ctime(3) style), or '%a, %e %b %Y
+ %H:%M:%S %z (%Z)' for a RFC 2822 format, or maybe '%Y-%m-%d
+ %H:%M:%S%z' for an ISO 8601 (EN 28601) format, or just
+ '%Y%m%dT%H%M%S' .
+
+ -u *username*, --username=*username*
+ Run as the named user. If this option is not set, the default
+ behaviour is to setuid() to the user running "spamc", if "spamd" is
+ running as root.
+
+ Note: "--username=root" is not a valid option. If specified, "spamd"
+ will exit with a fatal error on startup.
+
+ -g *groupname*, --groupname=*groupname*
+ Run as the named group if --username is being used. If this option
+ is not set when --username is used then the primary group for the
+ user given to --username is used.
+
+ -x, --nouser-config, --user-config
+ Turn off (on) reading of per-user configuration files (user_prefs)
+ from the user's home directory. The default behaviour is to read
+ per-user configuration from the user's home directory
+ (--user-config).
+
+ This option does not disable or otherwise influence the SQL, LDAP or
+ Virtual Config Dir settings.
+
+ --auth-ident
+ Verify the username provided by spamc using ident. This is only
+ useful if connections are only allowed from trusted hosts (because
+ an identd that lies is trivial to create) and if spamc REALLY SHOULD
+ be running as the user it represents. Connections are terminated
+ immediately if authentication fails. In this case, spamc will pass
+ the mail through unchecked. Failure to connect to an ident server,
+ and response timeouts are considered authentication failures. This
+ requires that Net::Ident be installed. Deprecated.
+
+ --ident-timeout=*timeout*
+ Wait at most *timeout* seconds for a response to ident queries.
+ Ident query that takes longer that *timeout* seconds will fail, and
+ mail will not be processed. Setting this to 0.0 or less results in
+ no timeout, which is STRONGLY discouraged. The default is 5 seconds.
+
+ -A *host,...*, --allowed-ips=*host,...*
+ Specify a comma-separated list of authorized hosts or networks which
+ can connect to this spamd instance. Each element of the list is
+ either a single IP addresses, or a range of IP addresses in
+ address/masklength CIDR notation, or ranges of IPv4 addresses by
+ specifying 3 or less octets with a trailing dot. Hostnames are not
+ supported, only IPv4 or IPv6 addresses. This option can be specified
+ multiple times, or can take a list of addresses separated by commas.
+ IPv6 addresses may be (but need not be) enclosed in square brackets
+ for consistency with option --listen. Examples:
+
+ -A 10.11.12.13 -- only allow connections from 10.11.12.13.
+
+ -A 10.11.12.13,10.11.12.14 -- only allow connections from
+ 10.11.12.13 and 10.11.12.14.
+
+ -A 10.200.300.0/24 -- allow connections from any machine in the
+ range "10.200.300.*".
+
+ -A 10. -- allow connections from any machine in the range
+ "10.*.*.*".
+
+ -A [2001:db8::]/32,192.0.2.0/24,::1,127.0.0.0/8 -- only accept
+ connections from specified test networks and from localhost.
+
+ In absence of the -A option, connections are only accepted from IP
+ address 127.0.0.1 or ::1, i.e. from localhost on a loopback
+ interface.
+
+ -D [*area,...*], --debug [*area,...*]
+ Produce debugging output. If no areas are listed, all debugging
+ information is printed. Diagnostic output can also be enabled for
+ each area individually; *area* is the area of the code to
+ instrument. For example, to produce diagnostic output on bayes,
+ learn, and dns, use:
+
+ spamassassin -D bayes,learn,dns
+
+ Higher priority informational messages that are suitable for logging
+ in normal circumstances are available with an area of "info".
+
+ For more information about which areas (also known as channels) are
+ available, please see the documentation at:
+
+ C<http://wiki.apache.org/spamassassin/DebugChannels>
+
+ -4, --ipv4only, --ipv4-only, --ipv4
+ Use IPv4 where applicable, do not use IPv6. The option affects a set
+ of listen sockets (see option "--listen") and disables IPv6 for DNS
+ tests.
+
+ -6 Use IPv6 where applicable, do not use IPv4. The option affects a set
+ of listen sockets (see option "--listen") and disables IPv4 for DNS
+ tests. Installing a module IO::Socket::IP is recommended if spamd is
+ expected to receive requests over IPv6.
+
+ -L, --local
+ Perform only local tests on all mail. In other words, skip DNS and
+ other network tests. Works the same as the "-L" flag to
+ spamassassin(1).
+
+ -P, --paranoid
+ Die on user errors (for the user passed from spamc) instead of
+ falling back to user *nobody* and using the default configuration.
+
+ -m *number* , --max-children=*number*
+ This option specifies the maximum number of children to spawn. Spamd
+ will spawn that number of children, then sleep in the background
+ until a child dies, wherein it will go and spawn a new child.
+
+ Incoming connections can still occur if all of the children are
+ busy, however those connections will be queued waiting for a free
+ child. The minimum value is 1, the default value is 5.
+
+ Please note that there is a OS specific maximum of connections that
+ can be queued (Try "perl -MSocket -e'print SOMAXCONN'" to find this
+ maximum).
+
+ Note that if you run too many servers for the amount of free RAM
+ available, you run the danger of hurting performance by causing a
+ high swap load as server processes are swapped in and out
+ continually.
+
+ --min-children=*number*
+ The minimum number of children that will be kept running. The
+ minimum value is 1, the default value is 1. If you have lots of free
+ RAM, you may want to increase this.
+
+ --min-spare=*number*
+ The lower limit for the number of spare children allowed to run. A
+ spare, or idle, child is one that is not handling a scan request. If
+ there are too few spare children available, a new server will be
+ started every second or so. The default value is 1.
+
+ --max-spare=*number*
+ The upper limit for the number of spare children allowed to run. If
+ there are too many spare children, one will be killed every second
+ or so until the number of idle children is in the desired range. The
+ default value is 2.
+
+ --max-conn-per-child=*number*
+ This option specifies the maximum number of connections each child
+ should process before dying and letting the master spamd process
+ spawn a new child. The minimum value is 1, the default value is 200.
+
+ --round-robin
+ By default, "spamd" will attempt to keep a small number of "hot"
+ child processes as busy as possible, and keep any others as idle as
+ possible, using something similar to the Apache httpd server scaling
+ algorithm. This is accomplished by the master process coordinating
+ the activities of the children. This switch will disable this
+ scaling algorithm, and the behaviour seen in the 3.0.x versions will
+ be used instead, where all processes receive an equal load and no
+ scaling takes place.
+
+ --timeout-tcp=*number*
+ This option specifies the number of seconds to wait for headers from
+ a client (spamc) before closing the connection. The minimum value is
+ 1, the default value is 30, and a value of 0 will disable socket
+ timeouts completely.
+
+ --timeout-child=*number*
+ This option specifies the number of seconds to wait for a spamd
+ child to process or check a message. The minimum value is 1, the
+ default value is 300, and a value of 0 will disable child timeouts
+ completely.
+
+ -H *directory*, --helper-home-dir=*directory*
+ Specify that external programs such as Razor, DCC, and Pyzor should
+ have a HOME environment variable set to a specific directory. The
+ default is to use the HOME environment variable setting from the
+ shell running spamd. By specifying no argument, spamd will use the
+ spamc caller's home directory instead.
+
+ --ssl
+ Accept only SSL connections on the associated port. The
+ IO::Socket::SSL perl module must be installed.
+
+ If the --ssl switch is used, and --ssl-port is not supplied, then
+ --port port will be used to accept SSL connections instead of
+ unencrypted connections. If the --ssl switch is used, and --ssl-port
+ is set, then unencrypted connections will be accepted on the --port,
+ at the same time as encrypted connections are accepted at
+ --ssl-port.
+
+ --ssl-port=*port*
+ Optionally specifies the port number for the server to listen on for
+ SSL connections (default: whatever --port uses). See --ssl for more
+ details.
+
+ --server-key *keyfile*
+ Specify the SSL key file to use for SSL connections.
+
+ --server-cert *certfile*
+ Specify the SSL certificate file to use for SSL connections.
+
+ --socketpath *pathname*
+ Listen on a UNIX domain socket at path *pathname*, in addition to
+ sockets specified with a "--listen" option. This option is provided
+ for compatibility with older versions of spamd. Starting with
+ version 3.4.0 the "--listen" option can also take a UNIX domain
+ socket as its value (an absolute path name). Unlike "--socketpath",
+ the "--listen" option may be specified multiple times if spamd needs
+ to listen on multiple UNIX or INET or INET6 sockets.
+
+ Warning: the Perl support on BSD platforms for UNIX domain sockets
+ seems to have a bug regarding paths of over 100 bytes or so
+ (SpamAssassin bug 4380). If you see a 'could not find newly-created
+ UNIX socket' error message, and the path appears truncated, this may
+ be the cause. Try using a shorter path to the socket.
+
+ By default, use of --socketpath without --listen will inhibit SSL
+ connections and unencrypted TCP connections. To add other sockets,
+ specify them with --listen, e.g. '--listen=:' or '--listen=*:'
+
+ --socketowner *name*
+ Set UNIX domain socket to be owned by the user named *name*. Note
+ that this requires that spamd be started as "root", and if "-u" is
+ used, that user should have write permissions to unlink the file
+ later, for when the "spamd" server is killed.
+
+ --socketgroup *name*
+ Set UNIX domain socket to be owned by the group named *name*. See
+ "--socketowner" for notes on ownership and permissions.
+
+ --socketmode *mode*
+ Set UNIX domain socket to use the octal mode *mode*. Note that if
+ "-u" is used, that user should have write permissions to unlink the
+ file later, for when the "spamd" server is killed.
+
+ --timing
+ Enable timing measurements and output the information for logging. This
+ is the same information as provided by the TIMING tag.
+
+SEE ALSO
+ spamc(1) spamassassin(1) Mail::SpamAssassin::Conf(3)
+ Mail::SpamAssassin(3)
+
+PREREQUISITES
+ "Mail::SpamAssassin"
+
+AUTHORS
+ The SpamAssassin(tm) Project (http://spamassassin.apache.org/)
+
+LICENSE
+ SpamAssassin is distributed under the Apache License, Version 2.0, as
+ described in the file "LICENSE" included with the distribution.
+