You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by GitBox <gi...@apache.org> on 2020/07/24 10:15:04 UTC
[GitHub] [incubator-nuttx] masayuki2009 commented on pull request #1455: Fix imxrt
masayuki2009 commented on pull request #1455:
URL: https://github.com/apache/incubator-nuttx/pull/1455#issuecomment-663468918
> @masayuki2009 I ran the test on the imxrt-1052 to verify the issue and the fix, but when I check the link I dont see any changes. This is on master, it looks like it negotiated 100. When I apply your patch I dont see a change to `Link partner advertised link modes: Not reported`
>
> ```
> Settings for enp0s20u2:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Supported pause frame use: No
> Supports auto-negotiation: Yes
> Supported FEC modes: Not reported
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Advertised pause frame use: No
> Advertised auto-negotiation: Yes
> Advertised FEC modes: Not reported
> Link partner advertised link modes: Not reported
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: No
> Link partner advertised FEC modes: No
> Speed: 100Mb/s
> Duplex: Full
> Auto-negotiation: on
> Port: MII
> PHYAD: 3
> Transceiver: internal
> Supports Wake-on: pg
> Wake-on: g
> Current message level: 0x00000007 (7)
> drv probe link
> Link detected: yes
> ```
Hi @btashton
Could you tell me your network topology and how to show the above log?
In my case I’m using NETGEAR Gigabit Ethernet switch with imxrt1060evk.
And without my patch, it only works in 10BaseT/Full mode.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org