You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Jamshid Afshar <ja...@caringo.com> on 2012/12/27 22:40:01 UTC
DevCloud2, not seeing "tiny Linux" template
I followed these steps
https://cwiki.apache.org/CLOUDSTACK/devcloud.html on my macbook. I see
the cloudstack ui at http://192.168.56.10:8080/client/.
I try to create a new Instance, but I do not have any templates to
choose from. I see the "tiny Linux" vhd and template.properties files
in /opt/storage/secondary/template/tmpl/1/5/, but it doesn't show in
ui. I only see the SystemVM template in the Templates tab.
I built cloudstack (current master) and run it within the vm itself.
Exactly what global settings have to be changed if running all-in-one,
instead of running the server on my host os as recommended? "host"
defaults to 10.0.3.15 which is one of the ip's in the vm.
I did restart the management server after "mvn -P developer -pl
tools/devcloud -Ddeploysvr". I did destroy the two system vms
(Secondary Storage and Console Proxy) which started up. They were
recreated but that didn't make a difference.
I see this "Host Alert" in the console but I'm not sure where to go to
get more information. I verified the settings from Troubleshooting.
nfs://192.168.56.10:/opt/storage/secondary
Alert state detected
Any help is appreciated.
PS: any chance of getting comments back in the wiki? That was a very
useful feature in the old wiki.
Thanks,
Jam
Re: DevCloud2, not seeing "tiny Linux" template
Posted by Isaac Chiang <is...@gmail.com>.
Hi Jam:
Does your secondary storage vm startup properly? I guest it is
probably your secondary storage vm
fails to mount the nfs secondary storage. Could you check the log
(/var/log/cloud/systemvm.log) in secondary
storage vm?
Rohit's website might be helpful : http://rohityadav.in/logs/devcloud/
Regards
Isaac
On Fri, Dec 28, 2012 at 5:40 AM, Jamshid Afshar
<ja...@caringo.com>wrote:
> I followed these steps
> https://cwiki.apache.org/CLOUDSTACK/devcloud.html on my macbook. I see
> the cloudstack ui at http://192.168.56.10:8080/client/.
>
> I try to create a new Instance, but I do not have any templates to
> choose from. I see the "tiny Linux" vhd and template.properties files
> in /opt/storage/secondary/template/tmpl/1/5/, but it doesn't show in
> ui. I only see the SystemVM template in the Templates tab.
>
> I built cloudstack (current master) and run it within the vm itself.
> Exactly what global settings have to be changed if running all-in-one,
> instead of running the server on my host os as recommended? "host"
> defaults to 10.0.3.15 which is one of the ip's in the vm.
>
> I did restart the management server after "mvn -P developer -pl
> tools/devcloud -Ddeploysvr". I did destroy the two system vms
> (Secondary Storage and Console Proxy) which started up. They were
> recreated but that didn't make a difference.
>
> I see this "Host Alert" in the console but I'm not sure where to go to
> get more information. I verified the settings from Troubleshooting.
>
> nfs://192.168.56.10:/opt/storage/secondary
> Alert state detected
>
> Any help is appreciated.
>
> PS: any chance of getting comments back in the wiki? That was a very
> useful feature in the old wiki.
>
> Thanks,
> Jam
>
Re: DevCloud2, not seeing "tiny Linux" template
Posted by Jamshid Afshar <ja...@gmail.com>.
Thanks, setting host=192.168.56.10 and restarting before deploying the
zone fixed the missing template issue.
- Yes, I'm building and running the management server within devcloud2.
- Yes, I followed that deploydb step from the wiki.
- Local storage is enabled for the zone.
I can now create an instance without disk and login.
The troubleshooting section already mentions "host", but I thought the
other ip was okay since it also resolved.
--Jam
On Thu, Dec 27, 2012 at 6:42 PM, Rohit Yadav <ro...@citrix.com> wrote:
> Just strike me did you deploydb with devcloud profile?
> mvn -P developer -pl developer,tools/devcloud -Ddeploydb
> If not, when systemvm comes up it would delete any template whose record is not in CloudStack's db.
> For your case, check the host ip and after the basic zone deployment when systemvm comes up you should see tinyLinux template in list of templates.
>
> Hope this helps,
> Rohit
>
>
> On 27-Dec-2012, at 4:22 PM, Rohit Yadav <ro...@citrix.com> wrote:
>
>>
>> On 27-Dec-2012, at 1:40 PM, Jamshid Afshar <ja...@caringo.com> wrote:
>>
>>> I followed these steps
>>> https://cwiki.apache.org/CLOUDSTACK/devcloud.html on my macbook. I see
>>> the cloudstack ui at http://192.168.56.10:8080/client/.
>>
>> Are you building cloudstack inside devcloud?
>> In that case, devcloud's default static ip is 192.168.56.10.
>>
>> Before deploying a zone, set the host to 192.168.56.10 in global settings (if it's something else, like 10.0.3.15 in your case) and restart mgmt server, after which you may start deploying a zone. The default devcloud2 image contains a pre-seeded systemvm template and ttylinux (tinylinux, a ~50MB linux distro).
>> Make sure to select/enable local storage when deploying the zone. There is no nfs primary storage pre-configured, devcloud uses local storage for its primary storage.
>>
>> For your case, set the host and restart mgmt server, if the zone was created without local storage enabled, you need to either create a new zone or create a nfs mount point for primary storage. If local storage was enabled, delete the systemvm, in devcloud; xe vm-uninstall --multiple.
>>
>> Note: For a non-default setup using devcloud, configure tools/devcloud/devcloud.cfg as per your use.
>> Exec the following while mgmt is running,
>> mvn -P developer -pl tools/devcloud -Ddeploysvr simply calls marvin to deploy a basic zone:
>> python ../marvin/marvin/deployDataCenter.py -i devcloud.cfg.
>>
>> Pl. see the troubleshooting section of the following wiki, and help add anything you find is missing in the wiki:
>> https://cwiki.apache.org/confluence/display/CLOUDSTACK/DevCloud
>>
>> Regards.
>>
>>>
>>> I try to create a new Instance, but I do not have any templates to
>>> choose from. I see the "tiny Linux" vhd and template.properties files
>>> in /opt/storage/secondary/template/tmpl/1/5/, but it doesn't show in
>>> ui. I only see the SystemVM template in the Templates tab.
>>>
>>> I built cloudstack (current master) and run it within the vm itself.
>>> Exactly what global settings have to be changed if running all-in-one,
>>> instead of running the server on my host os as recommended? "host"
>>> defaults to 10.0.3.15 which is one of the ip's in the vm.
>>>
>>> I did restart the management server after "mvn -P developer -pl
>>> tools/devcloud -Ddeploysvr". I did destroy the two system vms
>>> (Secondary Storage and Console Proxy) which started up. They were
>>> recreated but that didn't make a difference.
>>>
>>> I see this "Host Alert" in the console but I'm not sure where to go to
>>> get more information. I verified the settings from Troubleshooting.
>>>
>>> nfs://192.168.56.10:/opt/storage/secondary
>>> Alert state detected
>>>
>>> Any help is appreciated.
>>>
>>> PS: any chance of getting comments back in the wiki? That was a very
>>> useful feature in the old wiki.
>>>
>>> Thanks,
>>> Jam
>>
>
Re: DevCloud2, not seeing "tiny Linux" template
Posted by Rohit Yadav <ro...@citrix.com>.
Just strike me did you deploydb with devcloud profile?
mvn -P developer -pl developer,tools/devcloud -Ddeploydb
If not, when systemvm comes up it would delete any template whose record is not in CloudStack's db.
For your case, check the host ip and after the basic zone deployment when systemvm comes up you should see tinyLinux template in list of templates.
Hope this helps,
Rohit
On 27-Dec-2012, at 4:22 PM, Rohit Yadav <ro...@citrix.com> wrote:
>
> On 27-Dec-2012, at 1:40 PM, Jamshid Afshar <ja...@caringo.com> wrote:
>
>> I followed these steps
>> https://cwiki.apache.org/CLOUDSTACK/devcloud.html on my macbook. I see
>> the cloudstack ui at http://192.168.56.10:8080/client/.
>
> Are you building cloudstack inside devcloud?
> In that case, devcloud's default static ip is 192.168.56.10.
>
> Before deploying a zone, set the host to 192.168.56.10 in global settings (if it's something else, like 10.0.3.15 in your case) and restart mgmt server, after which you may start deploying a zone. The default devcloud2 image contains a pre-seeded systemvm template and ttylinux (tinylinux, a ~50MB linux distro).
> Make sure to select/enable local storage when deploying the zone. There is no nfs primary storage pre-configured, devcloud uses local storage for its primary storage.
>
> For your case, set the host and restart mgmt server, if the zone was created without local storage enabled, you need to either create a new zone or create a nfs mount point for primary storage. If local storage was enabled, delete the systemvm, in devcloud; xe vm-uninstall --multiple.
>
> Note: For a non-default setup using devcloud, configure tools/devcloud/devcloud.cfg as per your use.
> Exec the following while mgmt is running,
> mvn -P developer -pl tools/devcloud -Ddeploysvr simply calls marvin to deploy a basic zone:
> python ../marvin/marvin/deployDataCenter.py -i devcloud.cfg.
>
> Pl. see the troubleshooting section of the following wiki, and help add anything you find is missing in the wiki:
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/DevCloud
>
> Regards.
>
>>
>> I try to create a new Instance, but I do not have any templates to
>> choose from. I see the "tiny Linux" vhd and template.properties files
>> in /opt/storage/secondary/template/tmpl/1/5/, but it doesn't show in
>> ui. I only see the SystemVM template in the Templates tab.
>>
>> I built cloudstack (current master) and run it within the vm itself.
>> Exactly what global settings have to be changed if running all-in-one,
>> instead of running the server on my host os as recommended? "host"
>> defaults to 10.0.3.15 which is one of the ip's in the vm.
>>
>> I did restart the management server after "mvn -P developer -pl
>> tools/devcloud -Ddeploysvr". I did destroy the two system vms
>> (Secondary Storage and Console Proxy) which started up. They were
>> recreated but that didn't make a difference.
>>
>> I see this "Host Alert" in the console but I'm not sure where to go to
>> get more information. I verified the settings from Troubleshooting.
>>
>> nfs://192.168.56.10:/opt/storage/secondary
>> Alert state detected
>>
>> Any help is appreciated.
>>
>> PS: any chance of getting comments back in the wiki? That was a very
>> useful feature in the old wiki.
>>
>> Thanks,
>> Jam
>
Re: DevCloud2, not seeing "tiny Linux" template
Posted by Rohit Yadav <ro...@citrix.com>.
On 27-Dec-2012, at 1:40 PM, Jamshid Afshar <ja...@caringo.com> wrote:
> I followed these steps
> https://cwiki.apache.org/CLOUDSTACK/devcloud.html on my macbook. I see
> the cloudstack ui at http://192.168.56.10:8080/client/.
Are you building cloudstack inside devcloud?
In that case, devcloud's default static ip is 192.168.56.10.
Before deploying a zone, set the host to 192.168.56.10 in global settings (if it's something else, like 10.0.3.15 in your case) and restart mgmt server, after which you may start deploying a zone. The default devcloud2 image contains a pre-seeded systemvm template and ttylinux (tinylinux, a ~50MB linux distro).
Make sure to select/enable local storage when deploying the zone. There is no nfs primary storage pre-configured, devcloud uses local storage for its primary storage.
For your case, set the host and restart mgmt server, if the zone was created without local storage enabled, you need to either create a new zone or create a nfs mount point for primary storage. If local storage was enabled, delete the systemvm, in devcloud; xe vm-uninstall --multiple.
Note: For a non-default setup using devcloud, configure tools/devcloud/devcloud.cfg as per your use.
Exec the following while mgmt is running,
mvn -P developer -pl tools/devcloud -Ddeploysvr simply calls marvin to deploy a basic zone:
python ../marvin/marvin/deployDataCenter.py -i devcloud.cfg.
Pl. see the troubleshooting section of the following wiki, and help add anything you find is missing in the wiki:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/DevCloud
Regards.
>
> I try to create a new Instance, but I do not have any templates to
> choose from. I see the "tiny Linux" vhd and template.properties files
> in /opt/storage/secondary/template/tmpl/1/5/, but it doesn't show in
> ui. I only see the SystemVM template in the Templates tab.
>
> I built cloudstack (current master) and run it within the vm itself.
> Exactly what global settings have to be changed if running all-in-one,
> instead of running the server on my host os as recommended? "host"
> defaults to 10.0.3.15 which is one of the ip's in the vm.
>
> I did restart the management server after "mvn -P developer -pl
> tools/devcloud -Ddeploysvr". I did destroy the two system vms
> (Secondary Storage and Console Proxy) which started up. They were
> recreated but that didn't make a difference.
>
> I see this "Host Alert" in the console but I'm not sure where to go to
> get more information. I verified the settings from Troubleshooting.
>
> nfs://192.168.56.10:/opt/storage/secondary
> Alert state detected
>
> Any help is appreciated.
>
> PS: any chance of getting comments back in the wiki? That was a very
> useful feature in the old wiki.
>
> Thanks,
> Jam