You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@corinthia.apache.org by pm...@apache.org on 2015/04/24 18:17:33 UTC
[06/55] [abbrv] incubator-corinthia git commit: removed zlib
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com b/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com
deleted file mode 100644
index 65e9d0c..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/make_vms.com
+++ /dev/null
@@ -1,867 +0,0 @@
-$! make libz under VMS written by
-$! Martin P.J. Zinser
-$!
-$! In case of problems with the install you might contact me at
-$! zinser@zinser.no-ip.info(preferred) or
-$! martin.zinser@eurexchange.com (work)
-$!
-$! Make procedure history for Zlib
-$!
-$!------------------------------------------------------------------------------
-$! Version history
-$! 0.01 20060120 First version to receive a number
-$! 0.02 20061008 Adapt to new Makefile.in
-$! 0.03 20091224 Add support for large file check
-$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
-$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
-$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
-$! subdir path, update module search in makefile.in
-$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
-$! shared image creation
-$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
-$! image
-$! 0.09 20120305 SMS. P1 sets builder ("MMK", "MMS", " " (built-in)).
-$! "" -> automatic, preference: MMK, MMS, built-in.
-$!
-$ on error then goto err_exit
-$!
-$ true = 1
-$ false = 0
-$ tmpnam = "temp_" + f$getjpi("","pid")
-$ tt = tmpnam + ".txt"
-$ tc = tmpnam + ".c"
-$ th = tmpnam + ".h"
-$ define/nolog tconfig 'th'
-$ its_decc = false
-$ its_vaxc = false
-$ its_gnuc = false
-$ s_case = False
-$!
-$! Setup variables holding "config" information
-$!
-$ Make = "''p1'"
-$ name = "Zlib"
-$ version = "?.?.?"
-$ v_string = "ZLIB_VERSION"
-$ v_file = "zlib.h"
-$ ccopt = "/include = []"
-$ lopts = ""
-$ dnsrl = ""
-$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
-$ conf_check_string = ""
-$ linkonly = false
-$ optfile = name + ".opt"
-$ mapfile = name + ".map"
-$ libdefs = ""
-$ vax = f$getsyi("HW_MODEL").lt.1024
-$ axp = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
-$ ia64 = f$getsyi("HW_MODEL").ge.4096
-$!
-$! 2012-03-05 SMS.
-$! Why is this needed? And if it is needed, why not simply ".not. vax"?
-$!
-$!!! if axp .or. ia64 then set proc/parse=extended
-$!
-$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
-$ mydef = F$parse(whoami,,,"DEVICE")
-$ mydir = f$parse(whoami,,,"DIRECTORY") - "]["
-$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
-$!
-$! Check for MMK/MMS
-$!
-$ if (Make .eqs. "")
-$ then
-$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
-$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
-$ else
-$ Make = f$edit( Make, "trim")
-$ endif
-$!
-$ gosub find_version
-$!
-$ open/write topt tmp.opt
-$ open/write optf 'optfile'
-$!
-$ gosub check_opts
-$!
-$! Look for the compiler used
-$!
-$ gosub check_compiler
-$ close topt
-$ close optf
-$!
-$ if its_decc
-$ then
-$ ccopt = "/prefix=all" + ccopt
-$ if f$trnlnm("SYS") .eqs. ""
-$ then
-$ if axp
-$ then
-$ define sys sys$library:
-$ else
-$ ccopt = "/decc" + ccopt
-$ define sys decc$library_include:
-$ endif
-$ endif
-$!
-$! 2012-03-05 SMS.
-$! Why /NAMES = AS_IS? Why not simply ".not. vax"? And why not on VAX?
-$!
-$ if axp .or. ia64
-$ then
-$ ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
-$ s_case = true
-$ endif
-$ endif
-$ if its_vaxc .or. its_gnuc
-$ then
-$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ endif
-$!
-$! Build a fake configure input header
-$!
-$ open/write conf_hin config.hin
-$ write conf_hin "#undef _LARGEFILE64_SOURCE"
-$ close conf_hin
-$!
-$!
-$ i = 0
-$FIND_ACONF:
-$ fname = f$element(i,"#",aconf_in_file)
-$ if fname .eqs. "#" then goto AMISS_ERR
-$ if f$search(fname) .eqs. ""
-$ then
-$ i = i + 1
-$ goto find_aconf
-$ endif
-$ open/read/err=aconf_err aconf_in 'fname'
-$ open/write aconf zconf.h
-$ACONF_LOOP:
-$ read/end_of_file=aconf_exit aconf_in line
-$ work = f$edit(line, "compress,trim")
-$ if f$extract(0,6,work) .nes. "#undef"
-$ then
-$ if f$extract(0,12,work) .nes. "#cmakedefine"
-$ then
-$ write aconf line
-$ endif
-$ else
-$ cdef = f$element(1," ",work)
-$ gosub check_config
-$ endif
-$ goto aconf_loop
-$ACONF_EXIT:
-$ write aconf ""
-$ write aconf "/* VMS specifics added by make_vms.com: */"
-$ write aconf "#define VMS 1"
-$ write aconf "#include <unistd.h>"
-$ write aconf "#include <unixio.h>"
-$ write aconf "#ifdef _LARGEFILE"
-$ write aconf "# define off64_t __off64_t"
-$ write aconf "# define fopen64 fopen"
-$ write aconf "# define fseeko64 fseeko"
-$ write aconf "# define lseek64 lseek"
-$ write aconf "# define ftello64 ftell"
-$ write aconf "#endif"
-$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
-$ write aconf "# define HAVE_VSNPRINTF"
-$ write aconf "#endif"
-$ close aconf_in
-$ close aconf
-$ if f$search("''th'") .nes. "" then delete 'th';*
-$! Build the thing plain or with mms
-$!
-$ write sys$output "Compiling Zlib sources ..."
-$ if make.eqs.""
-$ then
-$ if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
-$ if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
-$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
- adler32.c zlib.h zconf.h
-$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
- compress.c zlib.h zconf.h
-$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
- crc32.c zlib.h zconf.h
-$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
- deflate.c deflate.h zutil.h zlib.h zconf.h
-$ CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
- gzclose.c zutil.h zlib.h zconf.h
-$ CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
- gzlib.c zutil.h zlib.h zconf.h
-$ CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
- gzread.c zutil.h zlib.h zconf.h
-$ CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
- gzwrite.c zutil.h zlib.h zconf.h
-$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
- infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
-$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
- inffast.c zutil.h zlib.h zconf.h inffast.h
-$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
- inflate.c zutil.h zlib.h zconf.h infblock.h
-$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
- inftrees.c zutil.h zlib.h zconf.h inftrees.h
-$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
- trees.c deflate.h zutil.h zlib.h zconf.h
-$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
- uncompr.c zlib.h zconf.h
-$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
- zutil.c zutil.h zlib.h zconf.h
-$ write sys$output "Building Zlib ..."
-$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
-$ write sys$output "Building example..."
-$ CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
- [.test]example.c zlib.h zconf.h
-$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$ write sys$output "Building minigzip..."
-$ CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
- [.test]minigzip.c zlib.h zconf.h
-$ call make minigzip.exe -
- "LINK minigzip,libz.olb/lib" -
- minigzip.obj libz.olb
-$ else
-$ gosub crea_mms
-$ write sys$output "Make ''name' ''version' with ''Make' "
-$ 'make'
-$ endif
-$!
-$! Create shareable image
-$!
-$ gosub crea_olist
-$ write sys$output "Creating libzshr.exe"
-$ call map_2_shopt 'mapfile' 'optfile'
-$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
-$ write sys$output "Zlib build completed"
-$ delete/nolog tmp.opt;*
-$ exit
-$AMISS_ERR:
-$ write sys$output "No source for config.hin found."
-$ write sys$output "Tried any of ''aconf_in_file'"
-$ goto err_exit
-$CC_ERR:
-$ write sys$output "C compiler required to build ''name'"
-$ goto err_exit
-$ERR_EXIT:
-$ set message/facil/ident/sever/text
-$ close/nolog optf
-$ close/nolog topt
-$ close/nolog aconf_in
-$ close/nolog aconf
-$ close/nolog out
-$ close/nolog min
-$ close/nolog mod
-$ close/nolog h_in
-$ write sys$output "Exiting..."
-$ exit 2
-$!
-$!
-$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
-$ V = 'F$Verify(0)
-$! P1 = What we are trying to make
-$! P2 = Command to make it
-$! P3 - P8 What it depends on
-$
-$ If F$Search(P1) .Eqs. "" Then Goto Makeit
-$ Time = F$CvTime(F$File(P1,"RDT"))
-$arg=3
-$Loop:
-$ Argument = P'arg
-$ If Argument .Eqs. "" Then Goto Exit
-$ El=0
-$Loop2:
-$ File = F$Element(El," ",Argument)
-$ If File .Eqs. " " Then Goto Endl
-$ AFile = ""
-$Loop3:
-$ OFile = AFile
-$ AFile = F$Search(File)
-$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
-$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
-$ Goto Loop3
-$NextEL:
-$ El = El + 1
-$ Goto Loop2
-$EndL:
-$ arg=arg+1
-$ If arg .Le. 8 Then Goto Loop
-$ Goto Exit
-$
-$Makeit:
-$ VV=F$VERIFY(0)
-$ write sys$output P2
-$ 'P2
-$ VV='F$Verify(VV)
-$Exit:
-$ If V Then Set Verify
-$ENDSUBROUTINE
-$!------------------------------------------------------------------------------
-$!
-$! Check command line options and set symbols accordingly
-$!
-$!------------------------------------------------------------------------------
-$! Version history
-$! 0.01 20041206 First version to receive a number
-$! 0.02 20060126 Add new "HELP" target
-$ CHECK_OPTS:
-$ i = 1
-$ OPT_LOOP:
-$ if i .lt. 9
-$ then
-$ cparm = f$edit(p'i',"upcase")
-$!
-$! Check if parameter actually contains something
-$!
-$ if f$edit(cparm,"trim") .nes. ""
-$ then
-$ if cparm .eqs. "DEBUG"
-$ then
-$ ccopt = ccopt + "/noopt/deb"
-$ lopts = lopts + "/deb"
-$ endif
-$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
-$ then
-$ start = f$locate("=",cparm) + 1
-$ len = f$length(cparm) - start
-$ ccopt = ccopt + f$extract(start,len,cparm)
-$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
- then s_case = true
-$ endif
-$ if cparm .eqs. "LINK" then linkonly = true
-$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
-$ then
-$ start = f$locate("=",cparm) + 1
-$ len = f$length(cparm) - start
-$ lopts = lopts + f$extract(start,len,cparm)
-$ endif
-$ if f$locate("CC=",cparm) .lt. f$length(cparm)
-$ then
-$ start = f$locate("=",cparm) + 1
-$ len = f$length(cparm) - start
-$ cc_com = f$extract(start,len,cparm)
- if (cc_com .nes. "DECC") .and. -
- (cc_com .nes. "VAXC") .and. -
- (cc_com .nes. "GNUC")
-$ then
-$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
-$ write sys$output "Use DECC, VAXC, or GNUC instead"
-$ else
-$ if cc_com .eqs. "DECC" then its_decc = true
-$ if cc_com .eqs. "VAXC" then its_vaxc = true
-$ if cc_com .eqs. "GNUC" then its_gnuc = true
-$ endif
-$ endif
-$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
-$ then
-$ start = f$locate("=",cparm) + 1
-$ len = f$length(cparm) - start
-$ mmks = f$extract(start,len,cparm)
-$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
-$ then
-$ make = mmks
-$ else
-$ write sys$output "Unsupported make choice ''mmks' ignored"
-$ write sys$output "Use MMK or MMS instead"
-$ endif
-$ endif
-$ if cparm .eqs. "HELP" then gosub bhelp
-$ endif
-$ i = i + 1
-$ goto opt_loop
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Look for the compiler used
-$!
-$! Version history
-$! 0.01 20040223 First version to receive a number
-$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
-$! 0.03 20060202 Extend handling of GNU C
-$! 0.04 20090402 Compaq -> hp
-$CHECK_COMPILER:
-$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
-$ then
-$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
-$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
-$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
-$ endif
-$!
-$! Exit if no compiler available
-$!
-$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
-$ then goto CC_ERR
-$ else
-$ if its_decc
-$ then
-$ write sys$output "CC compiler check ... hp C"
-$ if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
-$ then
-$ dnrsl = f$trnlnm("decc$no_rooted_search_lists")
-$ endif
-$ define/nolog decc$no_rooted_search_lists 1
-$ else
-$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
-$ if its_gnuc
-$ then
-$ write sys$output "CC compiler check ... GNU C"
-$ if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib"
-$ if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib"
-$ cc = "gcc"
-$ endif
-$ if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
-$ if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
-$ endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! If MMS/MMK are available dump out the descrip.mms if required
-$!
-$CREA_MMS:
-$ write sys$output "Creating descrip.mms..."
-$ create descrip.mms
-$ open/append out descrip.mms
-$ copy sys$input: out
-$ deck
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser
-# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
- gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
- deflate.obj, trees.obj, zutil.obj, inflate.obj, \
- inftrees.obj, inffast.obj
-
-$ eod
-$ write out "CFLAGS=", ccopt
-$ write out "LOPTS=", lopts
-$ write out "all : example.exe minigzip.exe libz.olb"
-$ copy sys$input: out
-$ deck
- @ write sys$output " Example applications available"
-
-libz.olb : libz.olb($(OBJS))
- @ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
- link $(LOPTS) example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
- link $(LOPTS) minigzip,libz.olb/lib
-
-clean :
- delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
-
-
-# Other dependencies.
-adler32.obj : adler32.c zutil.h zlib.h zconf.h
-compress.obj : compress.c zlib.h zconf.h
-crc32.obj : crc32.c zutil.h zlib.h zconf.h
-deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
-example.obj : [.test]example.c zlib.h zconf.h
-gzclose.obj : gzclose.c zutil.h zlib.h zconf.h
-gzlib.obj : gzlib.c zutil.h zlib.h zconf.h
-gzread.obj : gzread.c zutil.h zlib.h zconf.h
-gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h
-inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
-inflate.obj : inflate.c zutil.h zlib.h zconf.h
-inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
-minigzip.obj : [.test]minigzip.c zlib.h zconf.h
-trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
-uncompr.obj : uncompr.c zlib.h zconf.h
-zutil.obj : zutil.c zutil.h zlib.h zconf.h
-infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
-$ eod
-$ close out
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Read list of core library sources from makefile.in and create options
-$! needed to build shareable image
-$!
-$CREA_OLIST:
-$ open/read min makefile.in
-$ open/write mod modules.opt
-$ src_check_list = "OBJZ =#OBJG ="
-$MRLOOP:
-$ read/end=mrdone min rec
-$ i = 0
-$SRC_CHECK_LOOP:
-$ src_check = f$element(i, "#", src_check_list)
-$ i = i+1
-$ if src_check .eqs. "#" then goto mrloop
-$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
-$ rec = rec - src_check
-$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
-$MRSLOOP:
-$ read/end=mrdone min rec
-$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
-$MRDONE:
-$ close min
-$ close mod
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Take record extracted in crea_olist and split it into single filenames
-$!
-$EXTRA_FILNAM:
-$ myrec = f$edit(rec - "\", "trim,compress")
-$ i = 0
-$FELOOP:
-$ srcfil = f$element(i," ", myrec)
-$ if (srcfil .nes. " ")
-$ then
-$ write mod f$parse(srcfil,,,"NAME"), ".obj"
-$ i = i + 1
-$ goto feloop
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Find current Zlib version number
-$!
-$FIND_VERSION:
-$ open/read h_in 'v_file'
-$hloop:
-$ read/end=hdone h_in rec
-$ rec = f$edit(rec,"TRIM")
-$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
-$ rec = f$edit(rec - "#", "TRIM")
-$ if f$element(0," ",rec) .nes. "define" then goto hloop
-$ if f$element(1," ",rec) .eqs. v_string
-$ then
-$ version = 'f$element(2," ",rec)'
-$ goto hdone
-$ endif
-$ goto hloop
-$hdone:
-$ close h_in
-$ return
-$!------------------------------------------------------------------------------
-$!
-$CHECK_CONFIG:
-$!
-$ in_ldef = f$locate(cdef,libdefs)
-$ if (in_ldef .lt. f$length(libdefs))
-$ then
-$ write aconf "#define ''cdef' 1"
-$ libdefs = f$extract(0,in_ldef,libdefs) + -
- f$extract(in_ldef + f$length(cdef) + 1, -
- f$length(libdefs) - in_ldef - f$length(cdef) - 1, -
- libdefs)
-$ else
-$ if (f$type('cdef') .eqs. "INTEGER")
-$ then
-$ write aconf "#define ''cdef' ", 'cdef'
-$ else
-$ if (f$type('cdef') .eqs. "STRING")
-$ then
-$ write aconf "#define ''cdef' ", """", '''cdef'', """"
-$ else
-$ gosub check_cc_def
-$ endif
-$ endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check if this is a define relating to the properties of the C/C++
-$! compiler
-$!
-$ CHECK_CC_DEF:
-$ if (cdef .eqs. "_LARGEFILE64_SOURCE")
-$ then
-$ copy sys$input: 'tc'
-$ deck
-#include "tconfig"
-#define _LARGEFILE
-#include <stdio.h>
-
-int main(){
-FILE *fp;
- fp = fopen("temp.txt","r");
- fseeko(fp,1,SEEK_SET);
- fclose(fp);
-}
-
-$ eod
-$ test_inv = false
-$ comm_h = false
-$ gosub cc_prop_check
-$ return
-$ endif
-$ write aconf "/* ", line, " */"
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check for properties of C/C++ compiler
-$!
-$! Version history
-$! 0.01 20031020 First version to receive a number
-$! 0.02 20031022 Added logic for defines with value
-$! 0.03 20040309 Make sure local config file gets not deleted
-$! 0.04 20041230 Also write include for configure run
-$! 0.05 20050103 Add processing of "comment defines"
-$CC_PROP_CHECK:
-$ cc_prop = true
-$ is_need = false
-$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true)
-$ if f$search(th) .eqs. "" then create 'th'
-$ set message/nofac/noident/nosever/notext
-$ on error then continue
-$ cc 'tmpnam'
-$ if .not. ($status) then cc_prop = false
-$ on error then continue
-$! The headers might lie about the capabilities of the RTL
-$ link 'tmpnam',tmp.opt/opt
-$ if .not. ($status) then cc_prop = false
-$ set message/fac/ident/sever/text
-$ on error then goto err_exit
-$ delete/nolog 'tmpnam'.*;*/exclude='th'
-$ if (cc_prop .and. .not. is_need) .or. -
- (.not. cc_prop .and. is_need)
-$ then
-$ write sys$output "Checking for ''cdef'... yes"
-$ if f$type('cdef_val'_yes) .nes. ""
-$ then
-$ if f$type('cdef_val'_yes) .eqs. "INTEGER" -
- then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes)
-$ if f$type('cdef_val'_yes) .eqs. "STRING" -
- then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes)
-$ else
-$ call write_config f$fao("#define !AS 1",cdef)
-$ endif
-$ if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
- (cdef .eqs. "_LARGEFILE64_SOURCE") then -
- call write_config f$string("#define _LARGEFILE 1")
-$ else
-$ write sys$output "Checking for ''cdef'... no"
-$ if (comm_h)
-$ then
- call write_config f$fao("/* !AS */",line)
-$ else
-$ if f$type('cdef_val'_no) .nes. ""
-$ then
-$ if f$type('cdef_val'_no) .eqs. "INTEGER" -
- then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no)
-$ if f$type('cdef_val'_no) .eqs. "STRING" -
- then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no)
-$ else
-$ call write_config f$fao("#undef !AS",cdef)
-$ endif
-$ endif
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Check for properties of C/C++ compiler with multiple result values
-$!
-$! Version history
-$! 0.01 20040127 First version
-$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05
-$CC_MPROP_CHECK:
-$ cc_prop = true
-$ i = 1
-$ idel = 1
-$ MT_LOOP:
-$ if f$type(result_'i') .eqs. "STRING"
-$ then
-$ set message/nofac/noident/nosever/notext
-$ on error then continue
-$ cc 'tmpnam'_'i'
-$ if .not. ($status) then cc_prop = false
-$ on error then continue
-$! The headers might lie about the capabilities of the RTL
-$ link 'tmpnam'_'i',tmp.opt/opt
-$ if .not. ($status) then cc_prop = false
-$ set message/fac/ident/sever/text
-$ on error then goto err_exit
-$ delete/nolog 'tmpnam'_'i'.*;*
-$ if (cc_prop)
-$ then
-$ write sys$output "Checking for ''cdef'... ", mdef_'i'
-$ if f$type(mdef_'i') .eqs. "INTEGER" -
- then call write_config f$fao("#define !AS !UL",cdef,mdef_'i')
-$ if f$type('cdef_val'_yes) .eqs. "STRING" -
- then call write_config f$fao("#define !AS !AS",cdef,mdef_'i')
-$ goto msym_clean
-$ else
-$ i = i + 1
-$ goto mt_loop
-$ endif
-$ endif
-$ write sys$output "Checking for ''cdef'... no"
-$ call write_config f$fao("#undef !AS",cdef)
-$ MSYM_CLEAN:
-$ if (idel .le. msym_max)
-$ then
-$ delete/sym mdef_'idel'
-$ idel = idel + 1
-$ goto msym_clean
-$ endif
-$ return
-$!------------------------------------------------------------------------------
-$!
-$! Write configuration to both permanent and temporary config file
-$!
-$! Version history
-$! 0.01 20031029 First version to receive a number
-$!
-$WRITE_CONFIG: SUBROUTINE
-$ write aconf 'p1'
-$ open/append confh 'th'
-$ write confh 'p1'
-$ close confh
-$ENDSUBROUTINE
-$!------------------------------------------------------------------------------
-$!
-$! Analyze the project map file and create the symbol vector for a shareable
-$! image from it
-$!
-$! Version history
-$! 0.01 20120128 First version
-$! 0.02 20120226 Add pre-load logic
-$!
-$ MAP_2_SHOPT: Subroutine
-$!
-$ SAY := "WRITE_ SYS$OUTPUT"
-$!
-$ IF F$SEARCH("''P1'") .EQS. ""
-$ THEN
-$ SAY "MAP_2_SHOPT-E-NOSUCHFILE: Error, inputfile ''p1' not available"
-$ goto exit_m2s
-$ ENDIF
-$ IF "''P2'" .EQS. ""
-$ THEN
-$ SAY "MAP_2_SHOPT: Error, no output file provided"
-$ goto exit_m2s
-$ ENDIF
-$!
-$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
-$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
-$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
-$ module4 = "inflateSync#uncompress#zlibVersion#compress"
-$ open/read map 'p1
-$ if axp .or. ia64
-$ then
-$ open/write aopt a.opt
-$ open/write bopt b.opt
-$ write aopt " CASE_SENSITIVE=YES"
-$ write bopt "SYMBOL_VECTOR= (-"
-$ mod_sym_num = 1
-$ MOD_SYM_LOOP:
-$ if f$type(module'mod_sym_num') .nes. ""
-$ then
-$ mod_in = 0
-$ MOD_SYM_IN:
-$ shared_proc = f$element(mod_in, "#", module'mod_sym_num')
-$ if shared_proc .nes. "#"
-$ then
-$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
- f$edit(shared_proc,"upcase"),shared_proc)
-$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
-$ mod_in = mod_in + 1
-$ goto mod_sym_in
-$ endif
-$ mod_sym_num = mod_sym_num + 1
-$ goto mod_sym_loop
-$ endif
-$MAP_LOOP:
-$ read/end=map_end map line
-$ if (f$locate("{",line).lt. f$length(line)) .or. -
- (f$locate("global:", line) .lt. f$length(line))
-$ then
-$ proc = true
-$ goto map_loop
-$ endif
-$ if f$locate("}",line).lt. f$length(line) then proc = false
-$ if f$locate("local:", line) .lt. f$length(line) then proc = false
-$ if proc
-$ then
-$ shared_proc = f$edit(line,"collapse")
-$ chop_semi = f$locate(";", shared_proc)
-$ if chop_semi .lt. f$length(shared_proc) then -
- shared_proc = f$extract(0, chop_semi, shared_proc)
-$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
- f$edit(shared_proc,"upcase"),shared_proc)
-$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
-$ endif
-$ goto map_loop
-$MAP_END:
-$ close/nolog aopt
-$ close/nolog bopt
-$ open/append libopt 'p2'
-$ open/read aopt a.opt
-$ open/read bopt b.opt
-$ALOOP:
-$ read/end=aloop_end aopt line
-$ write libopt line
-$ goto aloop
-$ALOOP_END:
-$ close/nolog aopt
-$ sv = ""
-$BLOOP:
-$ read/end=bloop_end bopt svn
-$ if (svn.nes."")
-$ then
-$ if (sv.nes."") then write libopt sv
-$ sv = svn
-$ endif
-$ goto bloop
-$BLOOP_END:
-$ write libopt f$extract(0,f$length(sv)-2,sv), "-"
-$ write libopt ")"
-$ close/nolog bopt
-$ delete/nolog/noconf a.opt;*,b.opt;*
-$ else
-$ if vax
-$ then
-$ open/append libopt 'p2'
-$ mod_sym_num = 1
-$ VMOD_SYM_LOOP:
-$ if f$type(module'mod_sym_num') .nes. ""
-$ then
-$ mod_in = 0
-$ VMOD_SYM_IN:
-$ shared_proc = f$element(mod_in, "#", module'mod_sym_num')
-$ if shared_proc .nes. "#"
-$ then
-$ write libopt f$fao("UNIVERSAL=!AS",-
- f$edit(shared_proc,"upcase"))
-$ mod_in = mod_in + 1
-$ goto vmod_sym_in
-$ endif
-$ mod_sym_num = mod_sym_num + 1
-$ goto vmod_sym_loop
-$ endif
-$VMAP_LOOP:
-$ read/end=vmap_end map line
-$ if (f$locate("{",line).lt. f$length(line)) .or. -
- (f$locate("global:", line) .lt. f$length(line))
-$ then
-$ proc = true
-$ goto vmap_loop
-$ endif
-$ if f$locate("}",line).lt. f$length(line) then proc = false
-$ if f$locate("local:", line) .lt. f$length(line) then proc = false
-$ if proc
-$ then
-$ shared_proc = f$edit(line,"collapse")
-$ chop_semi = f$locate(";", shared_proc)
-$ if chop_semi .lt. f$length(shared_proc) then -
- shared_proc = f$extract(0, chop_semi, shared_proc)
-$ write libopt f$fao("UNIVERSAL=!AS",-
- f$edit(shared_proc,"upcase"))
-$ endif
-$ goto vmap_loop
-$VMAP_END:
-$ else
-$ write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
-$ write sys$output "No options file created"
-$ endif
-$ endif
-$ EXIT_M2S:
-$ close/nolog map
-$ close/nolog libopt
-$ endsubroutine
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor
deleted file mode 100644
index 3d12a2c..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.bor
+++ /dev/null
@@ -1,115 +0,0 @@
-# Makefile for zlib
-# Borland C++
-# Last updated: 15-Mar-2003
-
-# To use, do "make -fmakefile.bor"
-# To compile in small model, set below: MODEL=s
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-# -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to the LOC macro below:
-# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------ Turbo C++, Borland C++ ------------
-
-# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
-# to the declaration of LOC here:
-LOC = $(LOCAL_ZLIB)
-
-# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
-CPU_TYP = 0
-
-# memory model: one of s, m, c, l (small, medium, compact, large)
-MODEL=l
-
-# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
-CC=bcc
-LD=bcc
-AR=tlib
-
-# compiler flags
-# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
-CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
-
-LDFLAGS=-m$(MODEL) -f-
-
-
-# variables
-ZLIB_LIB = zlib_$(MODEL).lib
-
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
-OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
-
-
-# targets
-all: $(ZLIB_LIB) example.exe minigzip.exe
-
-.c.obj:
- $(CC) -c $(CFLAGS) $*.c
-
-adler32.obj: adler32.c zlib.h zconf.h
-
-compress.obj: compress.c zlib.h zconf.h
-
-crc32.obj: crc32.c zlib.h zconf.h crc32.h
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-
-gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
-
-gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
-
-gzread.obj: gzread.c zlib.h zconf.h gzguts.h
-
-gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
-
-infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-
-trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-
-example.obj: test/example.c zlib.h zconf.h
-
-minigzip.obj: test/minigzip.c zlib.h zconf.h
-
-
-# the command line is cut to fit in the MS-DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
- -del $(ZLIB_LIB)
- $(AR) $(ZLIB_LIB) $(OBJP1)
- $(AR) $(ZLIB_LIB) $(OBJP2)
-
-example.exe: example.obj $(ZLIB_LIB)
- $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
- $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
-
-test: example.exe minigzip.exe
- example
- echo hello world | minigzip | minigzip -d
-
-clean:
- -del *.obj
- -del *.lib
- -del *.exe
- -del zlib_*.bak
- -del foo.gz
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2 b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2
deleted file mode 100644
index 29b0395..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.dj2
+++ /dev/null
@@ -1,104 +0,0 @@
-# Makefile for zlib. Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-# make -fmakefile.dj2; make test -fmakefile.dj2
-#
-# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
-#
-# make install -fmakefile.dj2
-#
-# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
-# in the sample below if the pattern of the DJGPP distribution is to
-# be followed. Remember that, while <sp>'es around <=> are ignored in
-# makefiles, they are *not* in batch files or in djgpp.env.
-# - - - - -
-# [make]
-# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
-# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
-# BUTT=-m486
-# - - - - -
-# Alternately, these variables may be defined below, overriding the values
-# in djgpp.env, as
-# INCLUDE_PATH=c:\usr\include
-# LIBRARY_PATH=c:\usr\lib
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
- -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lz
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=libz.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
- uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
-
-OBJA =
-# to use the asm code: make OBJA=match.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-check: test
-test: all
- ./example
- echo hello world | .\minigzip | .\minigzip -d
-
-%.o : %.c
- $(CC) $(CFLAGS) -c $< -o $@
-
-libz.a: $(OBJS) $(OBJA)
- $(AR) $@ $(OBJS) $(OBJA)
-
-%.exe : %.o $(LIBS)
- $(LD) $@ $< $(LDLIBS)
-
-# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
-
-.PHONY : uninstall clean
-
-install: $(INCL) $(LIBS)
- -@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
- -@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
- $(INSTALL) zlib.h $(INCLUDE_PATH)
- $(INSTALL) zconf.h $(INCLUDE_PATH)
- $(INSTALL) libz.a $(LIBRARY_PATH)
-
-uninstall:
- $(RM) $(INCLUDE_PATH)\zlib.h
- $(RM) $(INCLUDE_PATH)\zconf.h
- $(RM) $(LIBRARY_PATH)\libz.a
-
-clean:
- $(RM) *.d
- $(RM) *.o
- $(RM) *.exe
- $(RM) libz.a
- $(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx
deleted file mode 100644
index 9c1b57a..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.emx
+++ /dev/null
@@ -1,69 +0,0 @@
-# Makefile for zlib. Modified for emx 0.9c by Chr. Spieler, 6/17/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-# make -fmakefile.emx; make test -fmakefile.emx
-#
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
- -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
- uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
- ./example
- echo hello world | .\minigzip | .\minigzip -d
-
-%.o : %.c
- $(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
- $(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
- $(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
- $(RM) *.d
- $(RM) *.o
- $(RM) *.exe
- $(RM) zlib.a
- $(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc
deleted file mode 100644
index ae83786..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.msc
+++ /dev/null
@@ -1,112 +0,0 @@
-# Makefile for zlib
-# Microsoft C 5.1 or later
-# Last updated: 19-Mar-2003
-
-# To use, do "make makefile.msc"
-# To compile in small model, set below: MODEL=S
-
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to the LOC macro below:
-# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Microsoft C 5.1 and later -------------
-
-# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
-# to the declaration of LOC here:
-LOC = $(LOCAL_ZLIB)
-
-# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
-CPU_TYP = 0
-
-# Memory model: one of S, M, C, L (small, medium, compact, large)
-MODEL=L
-
-CC=cl
-CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
-#-Ox generates bad code with MSC 5.1
-LIB_CFLAGS=-Zl $(CFLAGS)
-
-LD=link
-LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
-# "/farcall/packcode" are only useful for `large code' memory models
-# but should be a "no-op" for small code models.
-
-
-# variables
-ZLIB_LIB = zlib_$(MODEL).lib
-
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-
-
-# targets
-all: $(ZLIB_LIB) example.exe minigzip.exe
-
-.c.obj:
- $(CC) -c $(LIB_CFLAGS) $*.c
-
-adler32.obj: adler32.c zlib.h zconf.h
-
-compress.obj: compress.c zlib.h zconf.h
-
-crc32.obj: crc32.c zlib.h zconf.h crc32.h
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-
-gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
-
-gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
-
-gzread.obj: gzread.c zlib.h zconf.h gzguts.h
-
-gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
-
-infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-
-trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-
-example.obj: test/example.c zlib.h zconf.h
- $(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: test/minigzip.c zlib.h zconf.h
- $(CC) -c $(CFLAGS) $*.c
-
-
-# the command line is cut to fit in the MS-DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
- if exist $(ZLIB_LIB) del $(ZLIB_LIB)
- lib $(ZLIB_LIB) $(OBJ1);
- lib $(ZLIB_LIB) $(OBJ2);
-
-example.exe: example.obj $(ZLIB_LIB)
- $(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
- $(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
-
-test: example.exe minigzip.exe
- example
- echo hello world | minigzip | minigzip -d
-
-clean:
- -del *.obj
- -del *.lib
- -del *.exe
- -del *.map
- -del zlib_*.bak
- -del foo.gz
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc b/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc
deleted file mode 100644
index 5aec82a..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/msdos/Makefile.tc
+++ /dev/null
@@ -1,100 +0,0 @@
-# Makefile for zlib
-# Turbo C 2.01, Turbo C++ 1.01
-# Last updated: 15-Mar-2003
-
-# To use, do "make -fmakefile.tc"
-# To compile in small model, set below: MODEL=s
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-# -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below:
-# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------
-MODEL=l
-CC=tcc
-LD=tcc
-AR=tlib
-# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z -m$(MODEL)
-LDFLAGS=-m$(MODEL) -f-
-
-
-# variables
-ZLIB_LIB = zlib_$(MODEL).lib
-
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
-OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
-
-
-# targets
-all: $(ZLIB_LIB) example.exe minigzip.exe
-
-.c.obj:
- $(CC) -c $(CFLAGS) $*.c
-
-adler32.obj: adler32.c zlib.h zconf.h
-
-compress.obj: compress.c zlib.h zconf.h
-
-crc32.obj: crc32.c zlib.h zconf.h crc32.h
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-
-gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
-
-gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
-
-gzread.obj: gzread.c zlib.h zconf.h gzguts.h
-
-gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
-
-infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
- inffast.h inffixed.h
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-
-trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-
-example.obj: test/example.c zlib.h zconf.h
-
-minigzip.obj: test/minigzip.c zlib.h zconf.h
-
-
-# the command line is cut to fit in the MS-DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
- -del $(ZLIB_LIB)
- $(AR) $(ZLIB_LIB) $(OBJP1)
- $(AR) $(ZLIB_LIB) $(OBJP2)
-
-example.exe: example.obj $(ZLIB_LIB)
- $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
- $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
-
-test: example.exe minigzip.exe
- example
- echo hello world | minigzip | minigzip -d
-
-clean:
- -del *.obj
- -del *.lib
- -del *.exe
- -del zlib_*.bak
- -del foo.gz
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile b/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile
deleted file mode 100644
index 21337d0..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/Makefile
+++ /dev/null
@@ -1,126 +0,0 @@
-#---------------------------------------------------------------------------------
-.SUFFIXES:
-#---------------------------------------------------------------------------------
-
-ifeq ($(strip $(DEVKITARM)),)
-$(error "Please set DEVKITARM in your environment. export DEVKITARM=<path to>devkitARM")
-endif
-
-include $(DEVKITARM)/ds_rules
-
-#---------------------------------------------------------------------------------
-# TARGET is the name of the output
-# BUILD is the directory where object files & intermediate files will be placed
-# SOURCES is a list of directories containing source code
-# DATA is a list of directories containing data files
-# INCLUDES is a list of directories containing header files
-#---------------------------------------------------------------------------------
-TARGET := $(shell basename $(CURDIR))
-BUILD := build
-SOURCES := ../../
-DATA := data
-INCLUDES := include
-
-#---------------------------------------------------------------------------------
-# options for code generation
-#---------------------------------------------------------------------------------
-ARCH := -mthumb -mthumb-interwork
-
-CFLAGS := -Wall -O2\
- -march=armv5te -mtune=arm946e-s \
- -fomit-frame-pointer -ffast-math \
- $(ARCH)
-
-CFLAGS += $(INCLUDE) -DARM9
-CXXFLAGS := $(CFLAGS) -fno-rtti -fno-exceptions
-
-ASFLAGS := $(ARCH) -march=armv5te -mtune=arm946e-s
-LDFLAGS = -specs=ds_arm9.specs -g $(ARCH) -Wl,-Map,$(notdir $*.map)
-
-#---------------------------------------------------------------------------------
-# list of directories containing libraries, this must be the top level containing
-# include and lib
-#---------------------------------------------------------------------------------
-LIBDIRS := $(LIBNDS)
-
-#---------------------------------------------------------------------------------
-# no real need to edit anything past this point unless you need to add additional
-# rules for different file extensions
-#---------------------------------------------------------------------------------
-ifneq ($(BUILD),$(notdir $(CURDIR)))
-#---------------------------------------------------------------------------------
-
-export OUTPUT := $(CURDIR)/lib/libz.a
-
-export VPATH := $(foreach dir,$(SOURCES),$(CURDIR)/$(dir)) \
- $(foreach dir,$(DATA),$(CURDIR)/$(dir))
-
-export DEPSDIR := $(CURDIR)/$(BUILD)
-
-CFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.c)))
-CPPFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.cpp)))
-SFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.s)))
-BINFILES := $(foreach dir,$(DATA),$(notdir $(wildcard $(dir)/*.*)))
-
-#---------------------------------------------------------------------------------
-# use CXX for linking C++ projects, CC for standard C
-#---------------------------------------------------------------------------------
-ifeq ($(strip $(CPPFILES)),)
-#---------------------------------------------------------------------------------
- export LD := $(CC)
-#---------------------------------------------------------------------------------
-else
-#---------------------------------------------------------------------------------
- export LD := $(CXX)
-#---------------------------------------------------------------------------------
-endif
-#---------------------------------------------------------------------------------
-
-export OFILES := $(addsuffix .o,$(BINFILES)) \
- $(CPPFILES:.cpp=.o) $(CFILES:.c=.o) $(SFILES:.s=.o)
-
-export INCLUDE := $(foreach dir,$(INCLUDES),-I$(CURDIR)/$(dir)) \
- $(foreach dir,$(LIBDIRS),-I$(dir)/include) \
- -I$(CURDIR)/$(BUILD)
-
-.PHONY: $(BUILD) clean all
-
-#---------------------------------------------------------------------------------
-all: $(BUILD)
- @[ -d $@ ] || mkdir -p include
- @cp ../../*.h include
-
-lib:
- @[ -d $@ ] || mkdir -p $@
-
-$(BUILD): lib
- @[ -d $@ ] || mkdir -p $@
- @$(MAKE) --no-print-directory -C $(BUILD) -f $(CURDIR)/Makefile
-
-#---------------------------------------------------------------------------------
-clean:
- @echo clean ...
- @rm -fr $(BUILD) lib
-
-#---------------------------------------------------------------------------------
-else
-
-DEPENDS := $(OFILES:.o=.d)
-
-#---------------------------------------------------------------------------------
-# main targets
-#---------------------------------------------------------------------------------
-$(OUTPUT) : $(OFILES)
-
-#---------------------------------------------------------------------------------
-%.bin.o : %.bin
-#---------------------------------------------------------------------------------
- @echo $(notdir $<)
- @$(bin2o)
-
-
--include $(DEPENDS)
-
-#---------------------------------------------------------------------------------------
-endif
-#---------------------------------------------------------------------------------------
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README b/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README
deleted file mode 100644
index ba7a37d..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/nintendods/README
+++ /dev/null
@@ -1,5 +0,0 @@
-This Makefile requires devkitARM (http://www.devkitpro.org/category/devkitarm/) and works inside "contrib/nds". It is based on a devkitARM template.
-
-Eduardo Costa <ed...@gmail.com>
-January 3, 2009
-
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx b/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx
deleted file mode 100644
index 4d6ab0e..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.emx
+++ /dev/null
@@ -1,69 +0,0 @@
-# Makefile for zlib. Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-# make -fmakefile.emx; make test -fmakefile.emx
-#
-
-CC=gcc -Zwin32
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
- -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
- gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
- ./example
- echo hello world | .\minigzip | .\minigzip -d
-
-%.o : %.c
- $(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
- $(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
- $(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
- $(RM) *.d
- $(RM) *.o
- $(RM) *.exe
- $(RM) zlib.a
- $(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos b/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos
deleted file mode 100644
index 57e29d3..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/Makefile.riscos
+++ /dev/null
@@ -1,151 +0,0 @@
-# Project: zlib_1_03
-# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
-# test works out-of-the-box, installs `somewhere' on demand
-
-# Toolflags:
-CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah
-C++flags = -c -depend !Depend -IC: -throwback
-Linkflags = -aif -c++ -o $@
-ObjAsmflags = -throwback -NoCache -depend !Depend
-CMHGflags =
-LibFileflags = -c -l -o $@
-Squeezeflags = -o $@
-
-# change the line below to where _you_ want the library installed.
-libdest = lib:zlib
-
-# Final targets:
-@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
- @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
- @.o.uncompr @.o.zutil
- LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
- @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
- @.o.trees @.o.uncompr @.o.zutil
-test: @.minigzip @.example @.lib
- @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV
- @echo running tests: hang on.
- @/@.minigzip -f -9 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -f -1 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -h -9 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -h -1 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -9 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -1 libc
- @/@.minigzip -d libc-gz
- @diff @.lib @.libc
- @echo that should have reported '@.lib and @.libc identical' if you have diff.
- @/@.example @.fred @.fred
- @echo that will have given lots of hello!'s.
-
-@.minigzip: @.o.minigzip @.lib C:o.Stubs
- Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs
-@.example: @.o.example @.lib C:o.Stubs
- Link $(Linkflags) @.o.example @.lib C:o.Stubs
-
-install: @.lib
- cdir $(libdest)
- cdir $(libdest).h
- @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
- @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
- @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV
- @echo okay, installed zlib in $(libdest)
-
-clean:; remove @.minigzip
- remove @.example
- remove @.libc
- -wipe @.o.* F~r~cV
- remove @.fred
-
-# User-editable dependencies:
-.c.o:
- cc $(ccflags) -o $@ $<
-
-# Static dependencies:
-
-# Dynamic dependencies:
-o.example: c.example
-o.example: h.zlib
-o.example: h.zconf
-o.minigzip: c.minigzip
-o.minigzip: h.zlib
-o.minigzip: h.zconf
-o.adler32: c.adler32
-o.adler32: h.zlib
-o.adler32: h.zconf
-o.compress: c.compress
-o.compress: h.zlib
-o.compress: h.zconf
-o.crc32: c.crc32
-o.crc32: h.zlib
-o.crc32: h.zconf
-o.deflate: c.deflate
-o.deflate: h.deflate
-o.deflate: h.zutil
-o.deflate: h.zlib
-o.deflate: h.zconf
-o.gzio: c.gzio
-o.gzio: h.zutil
-o.gzio: h.zlib
-o.gzio: h.zconf
-o.infblock: c.infblock
-o.infblock: h.zutil
-o.infblock: h.zlib
-o.infblock: h.zconf
-o.infblock: h.infblock
-o.infblock: h.inftrees
-o.infblock: h.infcodes
-o.infblock: h.infutil
-o.infcodes: c.infcodes
-o.infcodes: h.zutil
-o.infcodes: h.zlib
-o.infcodes: h.zconf
-o.infcodes: h.inftrees
-o.infcodes: h.infblock
-o.infcodes: h.infcodes
-o.infcodes: h.infutil
-o.infcodes: h.inffast
-o.inffast: c.inffast
-o.inffast: h.zutil
-o.inffast: h.zlib
-o.inffast: h.zconf
-o.inffast: h.inftrees
-o.inffast: h.infblock
-o.inffast: h.infcodes
-o.inffast: h.infutil
-o.inffast: h.inffast
-o.inflate: c.inflate
-o.inflate: h.zutil
-o.inflate: h.zlib
-o.inflate: h.zconf
-o.inflate: h.infblock
-o.inftrees: c.inftrees
-o.inftrees: h.zutil
-o.inftrees: h.zlib
-o.inftrees: h.zconf
-o.inftrees: h.inftrees
-o.inftrees: h.inffixed
-o.infutil: c.infutil
-o.infutil: h.zutil
-o.infutil: h.zlib
-o.infutil: h.zconf
-o.infutil: h.infblock
-o.infutil: h.inftrees
-o.infutil: h.infcodes
-o.infutil: h.infutil
-o.trees: c.trees
-o.trees: h.deflate
-o.trees: h.zutil
-o.trees: h.zlib
-o.trees: h.zconf
-o.trees: h.trees
-o.uncompr: c.uncompr
-o.uncompr: h.zlib
-o.uncompr: h.zconf
-o.zutil: c.zutil
-o.zutil: h.zutil
-o.zutil: h.zlib
-o.zutil: h.zconf
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/README
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/README b/DocFormats/platform/3rdparty/zlib-1.2.8/old/README
deleted file mode 100644
index 800bf07..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/README
+++ /dev/null
@@ -1,3 +0,0 @@
-This directory contains files that have not been updated for zlib 1.2.x
-
-(Volunteers are encouraged to help clean this up. Thanks.)
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms b/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms
deleted file mode 100644
index 7066da5..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/descrip.mms
+++ /dev/null
@@ -1,48 +0,0 @@
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser <m....@gsi.de>
-
-cc_defs =
-c_deb =
-
-.ifdef __DECC__
-pref = /prefix=all
-.endif
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
- deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
- inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
-
-CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
-
-all : example.exe minigzip.exe
- @ write sys$output " Example applications available"
-libz.olb : libz.olb($(OBJS))
- @ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
- link example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
- link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
-
-clean :
- delete *.obj;*,libz.olb;*
-
-
-# Other dependencies.
-adler32.obj : zutil.h zlib.h zconf.h
-compress.obj : zlib.h zconf.h
-crc32.obj : zutil.h zlib.h zconf.h
-deflate.obj : deflate.h zutil.h zlib.h zconf.h
-example.obj : zlib.h zconf.h
-gzio.obj : zutil.h zlib.h zconf.h
-infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.obj : zutil.h zlib.h zconf.h infblock.h
-inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
-infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.obj : zlib.h zconf.h
-trees.obj : deflate.h zutil.h zlib.h zconf.h
-uncompr.obj : zlib.h zconf.h
-zutil.obj : zutil.h zlib.h zconf.h
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2 b/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2
deleted file mode 100644
index a105aaa..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/Makefile.os2
+++ /dev/null
@@ -1,136 +0,0 @@
-# Makefile for zlib under OS/2 using GCC (PGCC)
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile and test, type:
-# cp Makefile.os2 ..
-# cd ..
-# make -f Makefile.os2 test
-
-# This makefile will build a static library z.lib, a shared library
-# z.dll and a import library zdll.lib. You can use either z.lib or
-# zdll.lib by specifying either -lz or -lzdll on gcc's command line
-
-CC=gcc -Zomf -s
-
-CFLAGS=-O6 -Wall
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-# -Wstrict-prototypes -Wmissing-prototypes
-
-#################### BUG WARNING: #####################
-## infcodes.c hits a bug in pgcc-1.0, so you have to use either
-## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
-## This bug is reportedly fixed in pgcc >1.0, but this was not tested
-CFLAGS+=-fno-force-mem
-
-LDFLAGS=-s -L. -lzdll -Zcrtdll
-LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
-
-VER=1.1.0
-ZLIB=z.lib
-SHAREDLIB=z.dll
-SHAREDLIBIMP=zdll.lib
-LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
-
-AR=emxomfar cr
-IMPLIB=emximp
-RANLIB=echo
-TAR=tar
-SHELL=bash
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
- zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
- algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
- nt/Makefile.nt nt/zlib.dnt contrib/README.contrib contrib/*.txt \
- contrib/asm386/*.asm contrib/asm386/*.c \
- contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
- contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \
- contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
-
-all: example.exe minigzip.exe
-
-test: all
- @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
- echo hello world | ./minigzip | ./minigzip -d || \
- echo ' *** minigzip test FAILED ***' ; \
- if ./example; then \
- echo ' *** zlib test OK ***'; \
- else \
- echo ' *** zlib test FAILED ***'; \
- fi
-
-$(ZLIB): $(OBJS)
- $(AR) $@ $(OBJS)
- -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-$(SHAREDLIB): $(OBJS) os2/z.def
- $(LDSHARED) -o $@ $^
-
-$(SHAREDLIBIMP): os2/z.def
- $(IMPLIB) -o $@ $^
-
-example.exe: example.o $(LIBS)
- $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip.exe: minigzip.o $(LIBS)
- $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-clean:
- rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
-
-distclean: clean
-
-zip:
- mv Makefile Makefile~; cp -p Makefile.in Makefile
- rm -f test.c ztest*.c
- v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
- zip -ul9 zlib$$v $(DISTFILES)
- mv Makefile~ Makefile
-
-dist:
- mv Makefile Makefile~; cp -p Makefile.in Makefile
- rm -f test.c ztest*.c
- d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
- rm -f $$d.tar.gz; \
- if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
- files=""; \
- for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
- cd ..; \
- GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
- if test ! -d $$d; then rm -f $$d; fi
- mv Makefile~ Makefile
-
-tags:
- etags *.[ch]
-
-depend:
- makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h
-infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h
-inffast.o: infblock.h infcodes.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def b/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def
deleted file mode 100644
index 4c753f1..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/os2/zlib.def
+++ /dev/null
@@ -1,51 +0,0 @@
-;
-; Slightly modified version of ../nt/zlib.dnt :-)
-;
-
-LIBRARY Z
-DESCRIPTION "Zlib compression library for OS/2"
-CODE PRELOAD MOVEABLE DISCARDABLE
-DATA PRELOAD MOVEABLE MULTIPLE
-
-EXPORTS
- adler32
- compress
- crc32
- deflate
- deflateCopy
- deflateEnd
- deflateInit2_
- deflateInit_
- deflateParams
- deflateReset
- deflateSetDictionary
- gzclose
- gzdopen
- gzerror
- gzflush
- gzopen
- gzread
- gzwrite
- inflate
- inflateEnd
- inflateInit2_
- inflateInit_
- inflateReset
- inflateSetDictionary
- inflateSync
- uncompress
- zlibVersion
- gzprintf
- gzputc
- gzgetc
- gzseek
- gzrewind
- gztell
- gzeof
- gzsetparams
- zError
- inflateSyncPoint
- get_crc_table
- compress2
- gzputs
- gzgets
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt b/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt
deleted file mode 100644
index 57efe58..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/old/visual-basic.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-See below some functions declarations for Visual Basic.
-
-Frequently Asked Question:
-
-Q: Each time I use the compress function I get the -5 error (not enough
- room in the output buffer).
-
-A: Make sure that the length of the compressed buffer is passed by
- reference ("as any"), not by value ("as long"). Also check that
- before the call of compress this length is equal to the total size of
- the compressed buffer and not zero.
-
-
-From: "Jon Caruana" <jo...@usa.net>
-Subject: Re: How to port zlib declares to vb?
-Date: Mon, 28 Oct 1996 18:33:03 -0600
-
-Got the answer! (I haven't had time to check this but it's what I got, and
-looks correct):
-
-He has the following routines working:
- compress
- uncompress
- gzopen
- gzwrite
- gzread
- gzclose
-
-Declares follow: (Quoted from Carlos Rios <c_...@sonda.cl>, in Vb4 form)
-
-#If Win16 Then 'Use Win16 calls.
-Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
- String, comprLen As Any, ByVal buf As String, ByVal buflen
- As Long) As Integer
-Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
- As String, uncomprLen As Any, ByVal compr As String, ByVal
- lcompr As Long) As Integer
-Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
- String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
- Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
- As Integer
-Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
- Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
- As Integer
-Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
- Long) As Integer
-#Else
-Declare Function compress Lib "ZLIB32.DLL"
- (ByVal compr As String, comprLen As Any, ByVal buf As
- String, ByVal buflen As Long) As Integer
-Declare Function uncompress Lib "ZLIB32.DLL"
- (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
- String, ByVal lcompr As Long) As Long
-Declare Function gzopen Lib "ZLIB32.DLL"
- (ByVal file As String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB32.DLL"
- (ByVal file As Long, ByVal uncompr As String, ByVal
- uncomprLen As Long) As Long
-Declare Function gzwrite Lib "ZLIB32.DLL"
- (ByVal file As Long, ByVal uncompr As String, ByVal
- uncomprLen As Long) As Long
-Declare Function gzclose Lib "ZLIB32.DLL"
- (ByVal file As Long) As Long
-#End If
-
--Jon Caruana
-jon-net@usa.net
-Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
-
-
-Here is another example from Michael <mi...@hotmail.com> that he
-says conforms to the VB guidelines, and that solves the problem of not
-knowing the uncompressed size by storing it at the end of the file:
-
-'Calling the functions:
-'bracket meaning: <parameter> [optional] {Range of possible values}
-'Call subCompressFile(<path with filename to compress> [, <path with
-filename to write to>, [level of compression {1..9}]])
-'Call subUncompressFile(<path with filename to compress>)
-
-Option Explicit
-Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller'
-Private Const SUCCESS As Long = 0
-Private Const strFilExt As String = ".cpr"
-Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long,
-ByVal level As Integer) As Long
-Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long)
-As Long
-
-Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal
-strargCprFilPth As String, Optional ByVal intLvl As Integer = 9)
- Dim strCprPth As String
- Dim lngOriSiz As Long
- Dim lngCprSiz As Long
- Dim bytaryOri() As Byte
- Dim bytaryCpr() As Byte
- lngOriSiz = FileLen(strargOriFilPth)
- ReDim bytaryOri(lngOriSiz - 1)
- Open strargOriFilPth For Binary Access Read As #1
- Get #1, , bytaryOri()
- Close #1
- strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth)
-'Select file path and name
- strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) =
-strFilExt, "", strFilExt) 'Add file extension if not exists
- lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit
-more space then original file size
- ReDim bytaryCpr(lngCprSiz - 1)
- If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) =
-SUCCESS Then
- lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100
- ReDim Preserve bytaryCpr(lngCprSiz - 1)
- Open strCprPth For Binary Access Write As #1
- Put #1, , bytaryCpr()
- Put #1, , lngOriSiz 'Add the the original size value to the end
-(last 4 bytes)
- Close #1
- Else
- MsgBox "Compression error"
- End If
- Erase bytaryCpr
- Erase bytaryOri
-End Sub
-
-Public Sub subUncompressFile(ByVal strargFilPth As String)
- Dim bytaryCpr() As Byte
- Dim bytaryOri() As Byte
- Dim lngOriSiz As Long
- Dim lngCprSiz As Long
- Dim strOriPth As String
- lngCprSiz = FileLen(strargFilPth)
- ReDim bytaryCpr(lngCprSiz - 1)
- Open strargFilPth For Binary Access Read As #1
- Get #1, , bytaryCpr()
- Close #1
- 'Read the original file size value:
- lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _
- + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _
- + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _
- + bytaryCpr(lngCprSiz - 4)
- ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value
- ReDim bytaryOri(lngOriSiz - 1)
- If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS
-Then
- strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt))
- Open strOriPth For Binary Access Write As #1
- Put #1, , bytaryOri()
- Close #1
- Else
- MsgBox "Uncompression error"
- End If
- Erase bytaryCpr
- Erase bytaryOri
-End Sub
-Public Property Get lngPercentSmaller() As Long
- lngPercentSmaller = lngpvtPcnSml
-End Property
http://git-wip-us.apache.org/repos/asf/incubator-corinthia/blob/1a48f7c3/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg
----------------------------------------------------------------------
diff --git a/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg b/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg
deleted file mode 100644
index aebf6e3..0000000
--- a/DocFormats/platform/3rdparty/zlib-1.2.8/qnx/package.qpg
+++ /dev/null
@@ -1,141 +0,0 @@
-<QPG:Generation>
- <QPG:Options>
- <QPG:User unattended="no" verbosity="2" listfiles="yes"/>
- <QPG:Defaults type="qnx_package"/>
- <QPG:Source></QPG:Source>
- <QPG:Release number="+"/>
- <QPG:Build></QPG:Build>
- <QPG:FileSorting strip="yes"/>
- <QPG:Package targets="combine"/>
- <QPG:Repository generate="yes"/>
- <QPG:FinalDir></QPG:FinalDir>
- <QPG:Cleanup></QPG:Cleanup>
- </QPG:Options>
-
- <QPG:Responsible>
- <QPG:Company></QPG:Company>
- <QPG:Department></QPG:Department>
- <QPG:Group></QPG:Group>
- <QPG:Team></QPG:Team>
- <QPG:Employee></QPG:Employee>
- <QPG:EmailAddress></QPG:EmailAddress>
- </QPG:Responsible>
-
- <QPG:Values>
- <QPG:Files>
- <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
- <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
- <QPG:Add file="../libz.so.1.2.8" install="/opt/lib/" user="root:bin" permission="644"/>
- <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.8"/>
- <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.8"/>
- <QPG:Add file="../libz.so.1.2.8" install="/opt/lib/" component="slib"/>
- </QPG:Files>
-
- <QPG:PackageFilter>
- <QPM:PackageManifest>
- <QPM:PackageDescription>
- <QPM:PackageType>Library</QPM:PackageType>
- <QPM:PackageReleaseNotes></QPM:PackageReleaseNotes>
- <QPM:PackageReleaseUrgency>Medium</QPM:PackageReleaseUrgency>
- <QPM:PackageRepository></QPM:PackageRepository>
- <QPM:FileVersion>2.0</QPM:FileVersion>
- </QPM:PackageDescription>
-
- <QPM:ProductDescription>
- <QPM:ProductName>zlib</QPM:ProductName>
- <QPM:ProductIdentifier>zlib</QPM:ProductIdentifier>
- <QPM:ProductEmail>alain.bonnefoy@icbt.com</QPM:ProductEmail>
- <QPM:VendorName>Public</QPM:VendorName>
- <QPM:VendorInstallName>public</QPM:VendorInstallName>
- <QPM:VendorURL>www.gzip.org/zlib</QPM:VendorURL>
- <QPM:VendorEmbedURL></QPM:VendorEmbedURL>
- <QPM:VendorEmail></QPM:VendorEmail>
- <QPM:AuthorName>Jean-Loup Gailly,Mark Adler</QPM:AuthorName>
- <QPM:AuthorURL>www.gzip.org/zlib</QPM:AuthorURL>
- <QPM:AuthorEmbedURL></QPM:AuthorEmbedURL>
- <QPM:AuthorEmail>zlib@gzip.org</QPM:AuthorEmail>
- <QPM:ProductIconSmall></QPM:ProductIconSmall>
- <QPM:ProductIconLarge></QPM:ProductIconLarge>
- <QPM:ProductDescriptionShort>A massively spiffy yet delicately unobtrusive compression library.</QPM:ProductDescriptionShort>
- <QPM:ProductDescriptionLong>zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system.</QPM:ProductDescriptionLong>
- <QPM:ProductDescriptionURL>http://www.gzip.org/zlib</QPM:ProductDescriptionURL>
- <QPM:ProductDescriptionEmbedURL></QPM:ProductDescriptionEmbedURL>
- </QPM:ProductDescription>
-
- <QPM:ReleaseDescription>
- <QPM:ReleaseVersion>1.2.8</QPM:ReleaseVersion>
- <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
- <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
- <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
- <QPM:ReleaseNoteMajor></QPM:ReleaseNoteMajor>
- <QPM:ExcludeCountries>
- <QPM:Country></QPM:Country>
- </QPM:ExcludeCountries>
-
- <QPM:ReleaseCopyright>No License</QPM:ReleaseCopyright>
- </QPM:ReleaseDescription>
-
- <QPM:ContentDescription>
- <QPM:ContentTopic xmlmultiple="true">Software Development/Libraries and Extensions/C Libraries</QPM:ContentTopic>
- <QPM:ContentKeyword>zlib,compression</QPM:ContentKeyword>
- <QPM:TargetOS>qnx6</QPM:TargetOS>
- <QPM:HostOS>qnx6</QPM:HostOS>
- <QPM:DisplayEnvironment xmlmultiple="true">None</QPM:DisplayEnvironment>
- <QPM:TargetAudience xmlmultiple="true">Developer</QPM:TargetAudience>
- </QPM:ContentDescription>
- </QPM:PackageManifest>
- </QPG:PackageFilter>
-
- <QPG:PackageFilter proc="none" target="none">
- <QPM:PackageManifest>
- <QPM:ProductInstallationDependencies>
- <QPM:ProductRequirements></QPM:ProductRequirements>
- </QPM:ProductInstallationDependencies>
-
- <QPM:ProductInstallationProcedure>
- <QPM:Script xmlmultiple="true">
- <QPM:ScriptName></QPM:ScriptName>
- <QPM:ScriptType>Install</QPM:ScriptType>
- <QPM:ScriptTiming>Post</QPM:ScriptTiming>
- <QPM:ScriptBlocking>No</QPM:ScriptBlocking>
- <QPM:ScriptResult>Ignore</QPM:ScriptResult>
- <QPM:ShortDescription></QPM:ShortDescription>
- <QPM:UseBinaries>No</QPM:UseBinaries>
- <QPM:Priority>Optional</QPM:Priority>
- </QPM:Script>
- </QPM:ProductInstallationProcedure>
- </QPM:PackageManifest>
-
- <QPM:Launch>
- </QPM:Launch>
- </QPG:PackageFilter>
-
- <QPG:PackageFilter type="core" component="none">
- <QPM:PackageManifest>
- <QPM:ProductInstallationProcedure>
- <QPM:OrderDependency xmlmultiple="true">
- <QPM:Order>InstallOver</QPM:Order>
- <QPM:Product>zlib</QPM:Product>
- </QPM:OrderDependency>
- </QPM:ProductInstallationProcedure>
- </QPM:PackageManifest>
-
- <QPM:Launch>
- </QPM:Launch>
- </QPG:PackageFilter>
-
- <QPG:PackageFilter type="core" component="dev">
- <QPM:PackageManifest>
- <QPM:ProductInstallationProcedure>
- <QPM:OrderDependency xmlmultiple="true">
- <QPM:Order>InstallOver</QPM:Order>
- <QPM:Product>zlib-dev</QPM:Product>
- </QPM:OrderDependency>
- </QPM:ProductInstallationProcedure>
- </QPM:PackageManifest>
-
- <QPM:Launch>
- </QPM:Launch>
- </QPG:PackageFilter>
- </QPG:Values>
-</QPG:Generation>