You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by ac...@apache.org on 2020/01/09 11:00:37 UTC
[incubator-nuttx] branch master updated: Add Quectel EC20 4G LTE
Module USB CDC/ACM support
This is an automated email from the ASF dual-hosted git repository.
acassis pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new dc5d8f7 Add Quectel EC20 4G LTE Module USB CDC/ACM support
dc5d8f7 is described below
commit dc5d8f7c4478efee10c661034600a61d52d2c13f
Author: liuzhao <ha...@yeah.net>
AuthorDate: Thu Jan 9 07:58:07 2020 -0300
Add Quectel EC20 4G LTE Module USB CDC/ACM support
Author: Alan Carvalho de Assis <ac...@gmail.com>
Run nxstyle to check .c and .h files and fix reported issues
Author: liuzhao <ha...@yeah.net>
Add Quectel EC20 4G LTE Module USB CDC/ACM support
---
.../src/imxrt/hardware/rt106x/imxrt106x_pinmux.h | 16 ++
arch/arm/src/imxrt/imxrt_clockconfig.c | 27 +-
boards/arm/imxrt/imxrt1060-evk/include/board.h | 2 +
boards/arm/imxrt/imxrt1060-evk/src/Makefile | 4 +
boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h | 9 +-
boards/arm/imxrt/imxrt1060-evk/src/imxrt_bringup.c | 23 ++
boards/arm/imxrt/imxrt1060-evk/src/imxrt_usbhost.c | 314 +++++++++++++++++++++
drivers/usbhost/usbhost_cdcacm.c | 30 +-
8 files changed, 416 insertions(+), 9 deletions(-)
diff --git a/arch/arm/src/imxrt/hardware/rt106x/imxrt106x_pinmux.h b/arch/arm/src/imxrt/hardware/rt106x/imxrt106x_pinmux.h
index add5479..94608d0 100644
--- a/arch/arm/src/imxrt/hardware/rt106x/imxrt106x_pinmux.h
+++ b/arch/arm/src/imxrt/hardware/rt106x/imxrt106x_pinmux.h
@@ -1004,6 +1004,22 @@
#define GPIO_USDHC2_WP_1 (GPIO_PERIPH | GPIO_ALT6 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B1_10_INDEX))
#define GPIO_USDHC2_WP_2 (GPIO_PERIPH | GPIO_ALT6 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_EMC_37_INDEX))
+/* USB OTG */
+
+#define GPIO_USB1_OTG_ID_1 (GPIO_PERIPH | GPIO_ALT3 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B0_01_INDEX))
+#define GPIO_USB1_OTG_ID_2 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B1_02_INDEX))
+#define GPIO_USB1_OTG_OC_1 (GPIO_PERIPH | GPIO_ALT3 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B0_03_INDEX))
+#define GPIO_USB1_OTG_OC_2 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B1_03_INDEX))
+#define GPIO_USB1_OTG_PWR_1 (GPIO_PERIPH | GPIO_ALT3 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B0_02_INDEX))
+#define GPIO_USB1_OTG_PWR_2 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B1_01_INDEX))
+
+#define GPIO_USB2_OTG_ID_1 (GPIO_PERIPH | GPIO_ALT3 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B0_00_INDEX))
+#define GPIO_USB2_OTG_ID_2 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B1_00_INDEX))
+#define GPIO_USB2_OTG_OC_1 (GPIO_PERIPH | GPIO_ALT3 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_EMC_40_INDEX))
+#define GPIO_USB2_OTG_OC_2 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B0_14_INDEX))
+#define GPIO_USB2_OTG_PWR_1 (GPIO_PERIPH | GPIO_ALT3 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_EMC_41_INDEX))
+#define GPIO_USB2_OTG_PWR_2 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_AD_B0_15_INDEX))
+
/* Watchdog Timer (WDOG1-2) */
#define GPIO_WDOG1_1 (GPIO_PERIPH | GPIO_ALT0 | GPIO_PADMUX(IMXRT_PADMUX_GPIO_B1_13_INDEX))
diff --git a/arch/arm/src/imxrt/imxrt_clockconfig.c b/arch/arm/src/imxrt/imxrt_clockconfig.c
index c533a92..ec29f10 100644
--- a/arch/arm/src/imxrt/imxrt_clockconfig.c
+++ b/arch/arm/src/imxrt/imxrt_clockconfig.c
@@ -232,8 +232,8 @@ static void imxrt_pllsetup(void)
{
#ifdef CONFIG_ARCH_FAMILY_IMXRT102x
uint32_t pll2reg;
- uint32_t pll3reg;
#endif
+ uint32_t pll3reg;
uint32_t reg;
#if (defined(CONFIG_ARCH_FAMILY_IMXRT105x) || defined (CONFIG_ARCH_FAMILY_IMXRT106x))
@@ -255,6 +255,31 @@ static void imxrt_pllsetup(void)
{
}
+ /* Init USB PLL3 */
+
+ /* capture it's original value */
+
+ pll3reg = getreg32(IMXRT_CCM_ANALOG_PFD_480);
+ putreg32(pll3reg |
+ CCM_ANALOG_PFD_480_PFD0_CLKGATE |
+ CCM_ANALOG_PFD_480_PFD1_CLKGATE |
+ CCM_ANALOG_PFD_480_PFD2_CLKGATE |
+ CCM_ANALOG_PFD_480_PFD3_CLKGATE,
+ IMXRT_CCM_ANALOG_PFD_480);
+
+ reg = IMXRT_USB1_PLL_DIV_SELECT |
+ CCM_ANALOG_PLL_USB1_ENABLE |
+ CCM_ANALOG_PLL_USB1_EN_USB_CLKS |
+ CCM_ANALOG_PLL_USB1_POWER;
+ putreg32(reg, IMXRT_CCM_ANALOG_PLL_USB1);
+
+ while ((getreg32(IMXRT_CCM_ANALOG_PLL_USB1) &
+ CCM_ANALOG_PLL_USB1_LOCK) == 0)
+ {
+ }
+
+ putreg32(pll3reg, IMXRT_CCM_ANALOG_PFD_480);
+
#ifdef CONFIG_IMXRT_LCD
/* Init Video PLL5 */
diff --git a/boards/arm/imxrt/imxrt1060-evk/include/board.h b/boards/arm/imxrt/imxrt1060-evk/include/board.h
index 7f9a5ac..3cc8acc 100644
--- a/boards/arm/imxrt/imxrt1060-evk/include/board.h
+++ b/boards/arm/imxrt/imxrt1060-evk/include/board.h
@@ -125,6 +125,8 @@
#define IMXRT_SYS_PLL_SELECT CCM_ANALOG_PLL_SYS_DIV_SELECT_22
+#define IMXRT_USB1_PLL_DIV_SELECT CCM_ANALOG_PLL_USB1_DIV_SELECT_20
+
#define BOARD_CPU_FREQUENCY \
(BOARD_XTAL_FREQUENCY * (IMXRT_ARM_PLL_DIV_SELECT / 2)) / IMXRT_ARM_PODF_DIVIDER
diff --git a/boards/arm/imxrt/imxrt1060-evk/src/Makefile b/boards/arm/imxrt/imxrt1060-evk/src/Makefile
index 498bd11..0a3ad3b 100644
--- a/boards/arm/imxrt/imxrt1060-evk/src/Makefile
+++ b/boards/arm/imxrt/imxrt1060-evk/src/Makefile
@@ -82,4 +82,8 @@ ifeq ($(CONFIG_IMXRT_LCD),y)
CSRCS += imxrt_lcd.c
endif
+ifeq ($(CONFIG_IMXRT_USBOTG),y)
+CSRCS += imxrt_usbhost.c
+endif
+
include $(TOPDIR)/boards/Board.mk
diff --git a/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h b/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h
index c1267ad..87ddbb9 100644
--- a/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h
+++ b/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h
@@ -177,7 +177,6 @@
#define GPIO_FT5X06_CTRSTn (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | \
GPIO_PORT1 | GPIO_PIN2 | IOMUX_FT5X06_RST) /* AD_B0_02 */
-
/* Test Pins **************************************************************/
#define BOARD_NGPIOIN 0 /* Amount of GPIO Input pins */
@@ -196,6 +195,10 @@
#define GPIO_GOUT4 (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | IOMUX_GOUT_DEFAULT | \
GPIO_PIN9 | GPIO_PORT1)
+/* USB OTG ID Pin: GPIO_AD_B1_02 */
+
+#define GPIO_USBOTG_ID (GPIO_USB_OTG1_ID_1 | IOMUX_USBOTG_ID_DEFAULT) /* AD_B1_02 */
+
/****************************************************************************
* Public Types
****************************************************************************/
@@ -298,5 +301,9 @@ int imxrt_ft5x06_register(void);
void imxrt_lcd_initialize(void);
#endif
+#if defined(CONFIG_IMXRT_USBOTG) || defined(CONFIG_USBHOST)
+int imxrt_usbhost_initialize(void);
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_ARM_IMXRT1060_EVK_SRC_IMXRT1060_EVK_H */
diff --git a/boards/arm/imxrt/imxrt1060-evk/src/imxrt_bringup.c b/boards/arm/imxrt/imxrt1060-evk/src/imxrt_bringup.c
index c737608..eecc1a6 100644
--- a/boards/arm/imxrt/imxrt1060-evk/src/imxrt_bringup.c
+++ b/boards/arm/imxrt/imxrt1060-evk/src/imxrt_bringup.c
@@ -54,6 +54,10 @@
# include "imxrt_usdhc.h"
#endif
+#ifdef CONFIG_USBMONITOR
+# include <nuttx/usb/usbmonitor.h>
+#endif
+
#include "imxrt1060-evk.h"
#include <arch/board/board.h> /* Must always be included last */
@@ -184,6 +188,25 @@ int imxrt_bringup(void)
}
#endif
+#if defined(CONFIG_IMXRT_USBOTG) || defined(CONFIG_USBHOST)
+ ret = imxrt_usbhost_initialize();
+ if (ret != OK)
+ {
+ syslog(LOG_ERR, "ERROR: Failed to start USB host services: %d\n", ret);
+ return ret;
+ }
+#endif
+
+#ifdef CONFIG_USBMONITOR
+ /* Start the USB Monitor */
+
+ ret = usbmonitor_start();
+ if (ret != OK)
+ {
+ syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d\n", ret);
+ }
+#endif
+
#ifdef CONFIG_DEV_GPIO
/* Initialize the GPIO driver */
diff --git a/boards/arm/imxrt/imxrt1060-evk/src/imxrt_usbhost.c b/boards/arm/imxrt/imxrt1060-evk/src/imxrt_usbhost.c
new file mode 100644
index 0000000..94e6996
--- /dev/null
+++ b/boards/arm/imxrt/imxrt1060-evk/src/imxrt_usbhost.c
@@ -0,0 +1,314 @@
+/*****************************************************************************
+ * boards/arm/imxrt/imxrt1060-evk/src/imxrt_usbhost.c
+ *
+ * Copyright (C) 2013, 2015-2017 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <gn...@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <sched.h>
+#include <errno.h>
+#include <assert.h>
+#include <debug.h>
+
+#include <nuttx/irq.h>
+#include <nuttx/kthread.h>
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbhost.h>
+#include <nuttx/usb/usbdev_trace.h>
+#include <nuttx/usb/ehci.h>
+
+#include <imxrt_ehci.h>
+
+#include "hardware/imxrt_pinmux.h"
+#include "hardware/imxrt_usbotg.h"
+#include "imxrt_periphclks.h"
+#include "imxrt1060-evk.h"
+
+#include <arch/board/board.h> /* Must always be included last */
+
+#if defined(CONFIG_IMXRT_USBOTG) || defined(CONFIG_USBHOST)
+
+/*****************************************************************************
+ * Pre-processor Definitions
+ *****************************************************************************/
+
+#ifndef CONFIG_USBHOST_DEFPRIO
+# define CONFIG_USBHOST_DEFPRIO 50
+#endif
+
+#ifndef CONFIG_USBHOST_STACKSIZE
+# ifdef CONFIG_USBHOST_HUB
+# define CONFIG_USBHOST_STACKSIZE 1536
+# else
+# define CONFIG_USBHOST_STACKSIZE 1024
+# endif
+#endif
+
+/*****************************************************************************
+ * Private Data
+ *****************************************************************************/
+
+/* Retained device driver handle */
+
+static struct usbhost_connection_s *g_ehciconn;
+
+/*****************************************************************************
+ * Private Functions
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Name: ehci_waiter
+ *
+ * Description:
+ * Wait for USB devices to be connected to the EHCI root hub.
+ *
+ *****************************************************************************/
+
+static int ehci_waiter(int argc, char *argv[])
+{
+ FAR struct usbhost_hubport_s *hport;
+
+ uinfo("ehci_waiter: Running\n");
+ for (; ; )
+ {
+ /* Wait for the device to change state */
+
+ DEBUGVERIFY(CONN_WAIT(g_ehciconn, &hport));
+ syslog(LOG_INFO, "ehci_waiter: %s\n",
+ hport->connected ? "connected" : "disconnected");
+
+ /* Did we just become connected? */
+
+ if (hport->connected)
+ {
+ /* Yes.. enumerate the newly connected device */
+
+ CONN_ENUMERATE(g_ehciconn, hport);
+ }
+ }
+
+ /* Keep the compiler from complaining */
+
+ return 0;
+}
+
+/*****************************************************************************
+ * Public Functions
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Name: imxrt_usbhost_initialize
+ *
+ * Description:
+ * Called at application startup time to initialize the USB host
+ * functionality.
+ * This function will start a thread that will monitor for device
+ * connection/disconnection events.
+ *
+ *****************************************************************************/
+
+int imxrt_usbhost_initialize(void)
+{
+ pid_t pid;
+ int ret;
+
+ imxrt_clockall_usboh3();
+
+ /* Make sure we don't accidentially switch on USB bus power */
+
+ *((uint32_t *)IMXRT_USBNC_USB_OTG1_CTRL) = USBNC_PWR_POL;
+ *((uint32_t *)0x400d9030) = (1 << 21);
+ *((uint32_t *)0x400d9000) = 0;
+
+ /* Setup pins, with power initially off */
+
+ imxrt_config_gpio(GPIO_USBOTG_ID);
+
+ /* First, register all of the class drivers needed to support the drivers
+ * that we care about
+ */
+
+#ifdef CONFIG_USBHOST_HUB
+ /* Initialize USB hub support */
+
+ ret = usbhost_hub_initialize();
+ if (ret < 0)
+ {
+ syslog(LOG_ERR, "ERROR: usbhost_hub_initialize failed: %d\n", ret);
+ }
+#endif
+
+#ifdef CONFIG_USBHOST_MSC
+ /* Register the USB host Mass Storage Class */
+
+ ret = usbhost_msc_initialize();
+ if (ret != OK)
+ {
+ syslog(LOG_ERR,
+ "ERROR: Failed to register the mass storage class: %d\n", ret);
+ }
+#endif
+
+#ifdef CONFIG_USBHOST_CDCACM
+ /* Register the CDC/ACM serial class */
+
+ ret = usbhost_cdcacm_initialize();
+ if (ret != OK)
+ {
+ uerr("ERROR: Failed to register the CDC/ACM serial class\n");
+ }
+#endif
+
+#ifdef CONFIG_USBHOST_HIDKBD
+ /* Register the USB host HID keyboard class driver */
+
+ ret = usbhost_kbdinit();
+ if (ret != OK)
+ {
+ uerr("ERROR: Failed to register the KBD class\n");
+ }
+#endif
+
+ /* Then get an instance of the USB EHCI interface. */
+
+ g_ehciconn = imxrt_ehci_initialize(0);
+
+ if (!g_ehciconn)
+ {
+ uerr("ERROR: imxrt_ehci_initialize failed\n");
+ return -ENODEV;
+ }
+
+ /* Start a thread to handle device connection. */
+
+ pid = kthread_create("EHCI Monitor", CONFIG_USBHOST_DEFPRIO,
+ CONFIG_USBHOST_STACKSIZE,
+ (main_t)ehci_waiter, (FAR char * const *)NULL);
+ if (pid < 0)
+ {
+ uerr("ERROR: Failed to create ehci_waiter task: %d\n", ret);
+ return -ENODEV;
+ }
+
+ return OK;
+}
+
+/*****************************************************************************
+ * Name: imxrt_usbhost_vbusdrive
+ *
+ * Description:
+ * Enable/disable driving of VBUS 5V output. This function must be
+ * provided by each platform that implements the OHCI or EHCI host
+ * interface
+ *
+ * Input Parameters:
+ * rhport - Selects root hub port to be powered host interface.
+ * Since the IMXRT has only a downstream port, zero is
+ * the only possible value for this parameter.
+ * enable - true: enable VBUS power; false: disable VBUS power
+ *
+ * Returned Value:
+ * None
+ *
+ *****************************************************************************/
+
+#define HCOR ((volatile struct ehci_hcor_s *)IMXRT_USBOTG_HCOR_BASE)
+
+void imxrt_usbhost_vbusdrive(int rhport, bool enable)
+{
+ uint32_t regval;
+
+ uinfo("RHPort%d: enable=%d\n", rhport + 1, enable);
+
+ /* The IMXRT has only a single root hub port */
+
+ if (rhport == 0)
+ {
+ /* Then enable or disable VBUS power */
+
+ regval = HCOR->portsc[rhport];
+ regval &= ~EHCI_PORTSC_PP;
+ if (enable)
+ {
+ regval |= EHCI_PORTSC_PP;
+ }
+
+ HCOR->portsc[rhport] = regval;
+ }
+}
+
+/****************************************************************************
+ * Name: imxrt_setup_overcurrent
+ *
+ * Description:
+ * Setup to receive an interrupt-level callback if an overcurrent condition
+ * is detected.
+ *
+ * Input Parameters:
+ * handler - New overcurrent interrupt handler
+ * arg - The argument that will accompany the interrupt
+ *
+ * Returned Value:
+ * Zero (OK) returned on success; a negated errno value is returned on
+ * failure.
+ *
+ ****************************************************************************/
+
+#if 0 /* Not ready yet */
+int imxrt_setup_overcurrent(xcpt_t handler, void *arg)
+{
+ irqstate_t flags;
+
+ /* Disable interrupts until we are done. This guarantees that the
+ * following operations are atomic.
+ */
+
+ flags = enter_critical_section();
+
+ /* Configure the interrupt */
+
+#warning Missing logic
+
+ leave_critical_section(flags);
+ return OK;
+}
+#endif /* 0 */
+
+#endif /* CONFIG_IMXRT_USBOTG || CONFIG_USBHOST */
diff --git a/drivers/usbhost/usbhost_cdcacm.c b/drivers/usbhost/usbhost_cdcacm.c
index 7b195e7..f23c599 100644
--- a/drivers/usbhost/usbhost_cdcacm.c
+++ b/drivers/usbhost/usbhost_cdcacm.c
@@ -394,7 +394,7 @@ static bool usbhost_txempty(FAR struct uart_dev_s *uartdev);
* device.
*/
-static const struct usbhost_id_s g_id[2] =
+static const struct usbhost_id_s g_id[4] =
{
{
USB_CLASS_CDC, /* base */
@@ -409,6 +409,20 @@ static const struct usbhost_id_s g_id[2] =
CDC_PROTO_ATM, /* proto */
0, /* vid */
0 /* pid */
+ },
+ {
+ USB_CLASS_VENDOR_SPEC, /* base */
+ CDC_SUBCLASS_NONE, /* subclass */
+ CDC_PROTO_NONE, /* proto */
+ 0x2c7c, /* vid */
+ 0x0125 /* pid */
+ },
+ {
+ USB_CLASS_VENDOR_SPEC, /* base */
+ CDC_SUBCLASS_ACM, /* subclass */
+ CDC_PROTO_NONE, /* proto */
+ 0x2c7c, /* vid */
+ 0x0125 /* pid */
}
};
@@ -418,7 +432,7 @@ static struct usbhost_registry_s g_cdcacm =
{
NULL, /* flink */
usbhost_create, /* create */
- 2, /* nids */
+ 4, /* nids */
&g_id[0] /* id[] */
};
@@ -1380,7 +1394,8 @@ static int usbhost_cfgdesc(FAR struct usbhost_cdcacm_s *priv,
/* Check for the CDC/ACM data interface */
- if (ifdesc->classid == USB_CLASS_CDC_DATA &&
+ if ((ifdesc->classid == USB_CLASS_CDC_DATA ||
+ ifdesc->classid == USB_CLASS_VENDOR_SPEC) &&
(found & USBHOST_DATAIF_FOUND) == 0)
{
/* Save the data interface number and mark that the data
@@ -1494,7 +1509,8 @@ static int usbhost_cfgdesc(FAR struct usbhost_cdcacm_s *priv,
/* Check for an interrupt IN endpoint. */
else if (currif == USBHOST_CTRLIF_FOUND &&
- (epdesc->attr & USB_EP_ATTR_XFERTYPE_MASK) == USB_EP_ATTR_XFER_INT)
+ (epdesc->attr & USB_EP_ATTR_XFERTYPE_MASK) ==
+ USB_EP_ATTR_XFER_INT)
{
/* Yes.. it is a interrupt endpoint. IN or OUT? */
@@ -1690,7 +1706,7 @@ static void usbhost_putle32(FAR uint8_t *dest, uint32_t val)
/* Little endian means LS halfword first in byte stream */
usbhost_putle16(dest, (uint16_t)(val & 0xffff));
- usbhost_putle16(dest+2, (uint16_t)(val >> 16));
+ usbhost_putle16(dest + 2, (uint16_t)(val >> 16));
}
#endif
@@ -1890,7 +1906,7 @@ usbhost_create(FAR struct usbhost_hubport_s *hport,
if (usbhost_devno_alloc(priv) == OK)
{
- /* Initialize class method function pointers */
+ /* Initialize class method function pointers */
priv->usbclass.hport = hport;
priv->usbclass.connect = usbhost_connect;
@@ -2199,6 +2215,7 @@ static int usbhost_disconnected(FAR struct usbhost_class_s *usbclass)
/****************************************************************************
* Serial Lower-Half Interfaces
****************************************************************************/
+
/****************************************************************************
* Name: usbhost_setup
*
@@ -2608,7 +2625,6 @@ static void usbhost_rxint(FAR struct uart_dev_s *uartdev, bool enable)
static bool usbhost_rxavailable(FAR struct uart_dev_s *uartdev)
{
-
FAR struct usbhost_cdcacm_s *priv;
DEBUGASSERT(uartdev && uartdev->priv);