You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@trafficserver.apache.org by Vladyslav Bachynskyi <v....@gmail.com> on 2012/12/01 07:55:09 UTC
Storage on FreeBSD (file and raw device issues)
Hi All.
I'm working on optimization of our CDN, and ATS is looks like a solution
that can fit our requirements.
But I'm in stuck at the moment :(
Trying to make work trafficserver-3.0.5 (from the ports tree) on FreeBSD
9.1, but I found, that I can't create storage more that 1.5Tb (while I need
much larger storage ~50Tb if it's possible with ATS at all)
Got message:
[Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk operation
failed WRITE -1 22
[Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to clear cache
directory '/cache/trafficserver/cache.db 589824:393207737'
[Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to initialize
the cache for http: cache disabled
[Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
[TrafficManager] ==> Cleaning up and reissuing signal #15
If I set storage for example 1Tb everything work as expected without
warnings.
Tried to use raw device as storage, and got message "Currently Raw Disks
are not supported":
[Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently Raw Disks are
not supported
[Nov 30 16:57:07.928] Server {34418488320} WARNING: could not initialize
storage "/dev/da0" [Currently Raw Disks are not supported]
[Nov 30 16:57:07.928] Server {34418488320} NOTE: cache clustering disabled
If I missed the same thread, where the same issue was solved, please point
me on that.
Any help will be very appreciated.
Thanks in advance.
Re: Storage on FreeBSD (file and raw device issues)
Posted by Vladyslav Bachynskyi <v....@gmail.com>.
Any ideas about incorrect calculation of cache-file?
On 03.12.2012 11:55, Igor Galić wrote:
> efulness) of the debugging in the
> area, and hope you can help
Re: Storage on FreeBSD (file and raw device issues)
Posted by Igor Galić <i....@brainsware.org>.
----- Original Message -----
> Hi,
> I've created 3Tb zfs raw device, and got below messages:
>
> [Dec 3 10:18:20.785] Server {0x803809800} WARNING: disk header
> different for disk /dev/zvol/zroot/trafficserver: clearing the disk
> [Dec 3 10:18:20.788] Server {0x803807400} NOTE: logging
> initialized[15], logging_mode = 3
> [Dec 3 10:18:20.790] Server {0x80380a800} NOTE: Clearing Disk:
> /dev/zvol/zroot/trafficserver
> [Dec 3 10:18:20.808] Server {0x80380a800} NOTE: clearing cache
> directory '/dev/zvol/zroot/trafficserver 3153920:2147466879'
> [Dec 3 10:18:20.812] Server {0x803807400} NOTE: traffic server
> running
> [Dec 3 10:18:29.916] Server {0x803811c00} WARNING: cache disk
> operation failed WRITE -1 22
> [Dec 3 10:18:29.948] Server {0x80380c000} WARNING: unable to clear
> cache directory '/dev/zvol/zroot/trafficserver 3153920:2147466879'
> [Dec 3 10:18:29.948] Server {0x80380c400} WARNING: failed to
> initialize the cache for http: cache disabled
> [Dec 3 10:18:29.948] Server {0x80380c400} NOTE: cache disabled
n.b.: I have not tested this code with ZFS as provider for the
RAW disk, and I've only tested a meager 1G - which is all my
Laptop has..
I'll try to increase the (usefulness) of the debugging in the
area, and hope you can help me gain more insight.
i
> After I've changed it to cache-file with size 1024000M, file with
> strange size 15T was created.
>
> # ls -lh /cache/trafficserver/
> -rw-r--r-- 1 nobody www 15T Dec 3 10:26 cache.db
>
> And got the same issue:
>
> [Dec 3 10:24:10.873] Server {0x803809800} WARNING: disk header
> different for disk /cache/trafficserver/cache.db: clearing the disk
> [Dec 3 10:24:10.875] Server {0x803809c00} NOTE: Clearing Disk:
> /cache/trafficserver/cache.db
> [Dec 3 10:24:10.876] Server {0x803807400} NOTE: logging
> initialized[15], logging_mode = 3
> [Dec 3 10:24:10.889] Server {0x803809c00} NOTE: clearing cache
> directory '/cache/trafficserver/cache.db 3088384:2097143432'
> [Dec 3 10:24:10.902] Server {0x803807400} NOTE: traffic server
> running
> [Dec 3 10:24:20.004] Server {0x803813000} WARNING: cache disk
> operation failed WRITE -1 22
> [Dec 3 10:24:20.065] Server {0x80380c000} WARNING: unable to clear
> cache directory '/cache/trafficserver/cache.db 3088384:2097143432'
> [Dec 3 10:24:20.065] Server {0x80380c400} WARNING: failed to
> initialize the cache for http: cache disabled
> [Dec 3 10:24:20.065] Server {0x80380c400} NOTE: cache disabled
>
> BTW, if I set cache-file size to 102400M then 1.6T cached.db created,
> 1024M = 16G etc.
>
>
> On 01.12.2012 21:02, Igor Galić wrote:
>
>
>
> ----- Original Message -----
>
>
>
> I have already built the 3.3.1 dev version under FreeBSD and added
> the
> raw (zfs) disk to storage.config.
> All looks good at the moment, but full testing I'll be able to make
> in
> Monday at job.
> \o/
>
> Awesome. Your feedback is very appreciated. I have proposed this
> patch for the next stable release, but haven't had the opportunity
> to extensively test it myself
>
> i
>
>
>
> Thanks,
>
> On 12/01/2012 06:08 PM, James Peach wrote:
>
>
>
> On 30/11/2012, at 10:55 PM, Vladyslav Bachynskyi
> <v....@gmail.com> wrote:
>
>
>
> Hi All.
>
> I'm working on optimization of our CDN, and ATS is looks like a
> solution that can fit our requirements.
> But I'm in stuck at the moment :(
>
> Trying to make work trafficserver-3.0.5 (from the ports tree) on
> FreeBSD 9.1, but I found, that I can't create storage more that
> 1.5Tb (while I need much larger storage ~50Tb if it's possible
> with ATS at all)
>
> Got message:
>
> [Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk
> operation failed WRITE -1 22
> [Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to
> clear cache directory '/cache/trafficserver/cache.db
> 589824:393207737'
> [Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to
> initialize the cache for http: cache disabled
> [Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
> [TrafficManager] ==> Cleaning up and reissuing signal #15
>
> If I set storage for example 1Tb everything work as expected
> without warnings.
>
> Tried to use raw device as storage, and got message "Currently Raw
> Disks are not supported":
> Igor added FreeBSD raw disk support recently, but I don't think
> that's in any released version. Can you build master from
> git://git.apache.org/trafficserver.git and test that?
>
>
>
> [Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently Raw
> Disks are not supported
> [Nov 30 16:57:07.928] Server {34418488320} WARNING: could not
> initialize storage "/dev/da0" [Currently Raw Disks are not
> supported]
> [Nov 30 16:57:07.928] Server {34418488320} NOTE: cache clustering
> disabled
>
> If I missed the same thread, where the same issue was solved,
> please point me on that.
> Any help will be very appreciated.
> Thanks in advance.
>
>
> Hi,
> I've created 3Tb zfs raw device, and got below messages:
>
> [Dec 3 10:18:20.785] Server {0x803809800} WARNING: disk header
> different for disk /dev/zvol/zroot/trafficserver: clearing the disk
> [Dec 3 10:18:20.788] Server {0x803807400} NOTE: logging
> initialized[15], logging_mode = 3
> [Dec 3 10:18:20.790] Server {0x80380a800} NOTE: Clearing Disk:
> /dev/zvol/zroot/trafficserver
> [Dec 3 10:18:20.808] Server {0x80380a800} NOTE: clearing cache
> directory '/dev/zvol/zroot/trafficserver 3153920:2147466879'
> [Dec 3 10:18:20.812] Server {0x803807400} NOTE: traffic server
> running
> [Dec 3 10:18:29.916] Server {0x803811c00} WARNING: cache disk
> operation
> failed WRITE -1 22
> [Dec 3 10:18:29.948] Server {0x80380c000} WARNING: unable to clear
> cache directory '/dev/zvol/zroot/trafficserver 3153920:2147466879'
> [Dec 3 10:18:29.948] Server {0x80380c400} WARNING: failed to
> initialize
> the cache for http: cache disabled
> [Dec 3 10:18:29.948] Server {0x80380c400} NOTE: cache disabled
>
> After I've changed it to cache-file with size 1024000M, file with
> strange size 15T was created.
>
> # ls -lh /cache/trafficserver/
> -rw-r--r-- 1 nobody www 15T Dec 3 10:26 cache.db
>
> And got the same issue:
>
> [Dec 3 10:24:10.873] Server {0x803809800} WARNING: disk header
> different for disk /cache/trafficserver/cache.db: clearing the disk
> [Dec 3 10:24:10.875] Server {0x803809c00} NOTE: Clearing Disk:
> /cache/trafficserver/cache.db
> [Dec 3 10:24:10.876] Server {0x803807400} NOTE: logging
> initialized[15], logging_mode = 3
> [Dec 3 10:24:10.889] Server {0x803809c00} NOTE: clearing cache
> directory '/cache/trafficserver/cache.db 3088384:2097143432'
> [Dec 3 10:24:10.902] Server {0x803807400} NOTE: traffic server
> running
> [Dec 3 10:24:20.004] Server {0x803813000} WARNING: cache disk
> operation
> failed WRITE -1 22
> [Dec 3 10:24:20.065] Server {0x80380c000} WARNING: unable to clear
> cache directory '/cache/trafficserver/cache.db 3088384:2097143432'
> [Dec 3 10:24:20.065] Server {0x80380c400} WARNING: failed to
> initialize
> the cache for http: cache disabled
> [Dec 3 10:24:20.065] Server {0x80380c400} NOTE: cache disabled
>
> BTW, if I set cache-file size to 102400M then 1.6T cached.db created,
> 1024M = 16G etc.
>
>
> On 01.12.2012 21:02, Igor Galić wrote:
> >
> > ----- Original Message -----
> >> I have already built the 3.3.1 dev version under FreeBSD and added
> >> the
> >> raw (zfs) disk to storage.config.
> >> All looks good at the moment, but full testing I'll be able to
> >> make
> >> in
> >> Monday at job.
> > \o/
> >
> > Awesome. Your feedback is very appreciated. I have proposed this
> > patch for the next stable release, but haven't had the opportunity
> > to extensively test it myself
> >
> > i
> >
> >> Thanks,
> >>
> >> On 12/01/2012 06:08 PM, James Peach wrote:
> >>> On 30/11/2012, at 10:55 PM, Vladyslav Bachynskyi
> >>> <v....@gmail.com> wrote:
> >>>
> >>>> Hi All.
> >>>>
> >>>> I'm working on optimization of our CDN, and ATS is looks like a
> >>>> solution that can fit our requirements.
> >>>> But I'm in stuck at the moment :(
> >>>>
> >>>> Trying to make work trafficserver-3.0.5 (from the ports tree) on
> >>>> FreeBSD 9.1, but I found, that I can't create storage more that
> >>>> 1.5Tb (while I need much larger storage ~50Tb if it's possible
> >>>> with ATS at all)
> >>>>
> >>>> Got message:
> >>>>
> >>>> [Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk
> >>>> operation failed WRITE -1 22
> >>>> [Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to
> >>>> clear cache directory '/cache/trafficserver/cache.db
> >>>> 589824:393207737'
> >>>> [Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to
> >>>> initialize the cache for http: cache disabled
> >>>> [Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
> >>>> [TrafficManager] ==> Cleaning up and reissuing signal #15
> >>>>
> >>>> If I set storage for example 1Tb everything work as expected
> >>>> without warnings.
> >>>>
> >>>> Tried to use raw device as storage, and got message "Currently
> >>>> Raw
> >>>> Disks are not supported":
> >>> Igor added FreeBSD raw disk support recently, but I don't think
> >>> that's in any released version. Can you build master from
> >>> git://git.apache.org/trafficserver.git and test that?
> >>>
> >>>> [Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently
> >>>> Raw
> >>>> Disks are not supported
> >>>> [Nov 30 16:57:07.928] Server {34418488320} WARNING: could not
> >>>> initialize storage "/dev/da0" [Currently Raw Disks are not
> >>>> supported]
> >>>> [Nov 30 16:57:07.928] Server {34418488320} NOTE: cache
> >>>> clustering
> >>>> disabled
> >>>>
> >>>> If I missed the same thread, where the same issue was solved,
> >>>> please point me on that.
> >>>> Any help will be very appreciated.
> >>>> Thanks in advance.
> >>>>
> >>
>
>
--
Igor Galić
Tel: +43 (0) 664 886 22 883
Mail: i.galic@brainsware.org
URL: http://brainsware.org/
GPG: 6880 4155 74BD FD7C B515 2EA5 4B1D 9E08 A097 C9AE
Re: Storage on FreeBSD (file and raw device issues)
Posted by Vladyslav Bachynskyi <v....@gmail.com>.
Hi,
I've created 3Tb zfs raw device, and got below messages:
[Dec 3 10:18:20.785] Server {0x803809800} WARNING: disk header
different for disk /dev/zvol/zroot/trafficserver: clearing the disk
[Dec 3 10:18:20.788] Server {0x803807400} NOTE: logging
initialized[15], logging_mode = 3
[Dec 3 10:18:20.790] Server {0x80380a800} NOTE: Clearing Disk:
/dev/zvol/zroot/trafficserver
[Dec 3 10:18:20.808] Server {0x80380a800} NOTE: clearing cache
directory '/dev/zvol/zroot/trafficserver 3153920:2147466879'
[Dec 3 10:18:20.812] Server {0x803807400} NOTE: traffic server running
[Dec 3 10:18:29.916] Server {0x803811c00} WARNING: cache disk operation
failed WRITE -1 22
[Dec 3 10:18:29.948] Server {0x80380c000} WARNING: unable to clear
cache directory '/dev/zvol/zroot/trafficserver 3153920:2147466879'
[Dec 3 10:18:29.948] Server {0x80380c400} WARNING: failed to initialize
the cache for http: cache disabled
[Dec 3 10:18:29.948] Server {0x80380c400} NOTE: cache disabled
After I've changed it to cache-file with size 1024000M, file with
strange size 15T was created.
# ls -lh /cache/trafficserver/
-rw-r--r-- 1 nobody www 15T Dec 3 10:26 cache.db
And got the same issue:
[Dec 3 10:24:10.873] Server {0x803809800} WARNING: disk header
different for disk /cache/trafficserver/cache.db: clearing the disk
[Dec 3 10:24:10.875] Server {0x803809c00} NOTE: Clearing Disk:
/cache/trafficserver/cache.db
[Dec 3 10:24:10.876] Server {0x803807400} NOTE: logging
initialized[15], logging_mode = 3
[Dec 3 10:24:10.889] Server {0x803809c00} NOTE: clearing cache
directory '/cache/trafficserver/cache.db 3088384:2097143432'
[Dec 3 10:24:10.902] Server {0x803807400} NOTE: traffic server running
[Dec 3 10:24:20.004] Server {0x803813000} WARNING: cache disk operation
failed WRITE -1 22
[Dec 3 10:24:20.065] Server {0x80380c000} WARNING: unable to clear
cache directory '/cache/trafficserver/cache.db 3088384:2097143432'
[Dec 3 10:24:20.065] Server {0x80380c400} WARNING: failed to initialize
the cache for http: cache disabled
[Dec 3 10:24:20.065] Server {0x80380c400} NOTE: cache disabled
BTW, if I set cache-file size to 102400M then 1.6T cached.db created,
1024M = 16G etc.
On 01.12.2012 21:02, Igor Galić wrote:
>
> ----- Original Message -----
>> I have already built the 3.3.1 dev version under FreeBSD and added
>> the
>> raw (zfs) disk to storage.config.
>> All looks good at the moment, but full testing I'll be able to make
>> in
>> Monday at job.
> \o/
>
> Awesome. Your feedback is very appreciated. I have proposed this
> patch for the next stable release, but haven't had the opportunity
> to extensively test it myself
>
> i
>
>> Thanks,
>>
>> On 12/01/2012 06:08 PM, James Peach wrote:
>>> On 30/11/2012, at 10:55 PM, Vladyslav Bachynskyi
>>> <v....@gmail.com> wrote:
>>>
>>>> Hi All.
>>>>
>>>> I'm working on optimization of our CDN, and ATS is looks like a
>>>> solution that can fit our requirements.
>>>> But I'm in stuck at the moment :(
>>>>
>>>> Trying to make work trafficserver-3.0.5 (from the ports tree) on
>>>> FreeBSD 9.1, but I found, that I can't create storage more that
>>>> 1.5Tb (while I need much larger storage ~50Tb if it's possible
>>>> with ATS at all)
>>>>
>>>> Got message:
>>>>
>>>> [Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk
>>>> operation failed WRITE -1 22
>>>> [Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to
>>>> clear cache directory '/cache/trafficserver/cache.db
>>>> 589824:393207737'
>>>> [Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to
>>>> initialize the cache for http: cache disabled
>>>> [Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
>>>> [TrafficManager] ==> Cleaning up and reissuing signal #15
>>>>
>>>> If I set storage for example 1Tb everything work as expected
>>>> without warnings.
>>>>
>>>> Tried to use raw device as storage, and got message "Currently Raw
>>>> Disks are not supported":
>>> Igor added FreeBSD raw disk support recently, but I don't think
>>> that's in any released version. Can you build master from
>>> git://git.apache.org/trafficserver.git and test that?
>>>
>>>> [Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently Raw
>>>> Disks are not supported
>>>> [Nov 30 16:57:07.928] Server {34418488320} WARNING: could not
>>>> initialize storage "/dev/da0" [Currently Raw Disks are not
>>>> supported]
>>>> [Nov 30 16:57:07.928] Server {34418488320} NOTE: cache clustering
>>>> disabled
>>>>
>>>> If I missed the same thread, where the same issue was solved,
>>>> please point me on that.
>>>> Any help will be very appreciated.
>>>> Thanks in advance.
>>>>
>>
Re: Storage on FreeBSD (file and raw device issues)
Posted by Igor Galić <i....@brainsware.org>.
----- Original Message -----
> I have already built the 3.3.1 dev version under FreeBSD and added
> the
> raw (zfs) disk to storage.config.
> All looks good at the moment, but full testing I'll be able to make
> in
> Monday at job.
\o/
Awesome. Your feedback is very appreciated. I have proposed this
patch for the next stable release, but haven't had the opportunity
to extensively test it myself
i
> Thanks,
>
> On 12/01/2012 06:08 PM, James Peach wrote:
> > On 30/11/2012, at 10:55 PM, Vladyslav Bachynskyi
> > <v....@gmail.com> wrote:
> >
> >> Hi All.
> >>
> >> I'm working on optimization of our CDN, and ATS is looks like a
> >> solution that can fit our requirements.
> >> But I'm in stuck at the moment :(
> >>
> >> Trying to make work trafficserver-3.0.5 (from the ports tree) on
> >> FreeBSD 9.1, but I found, that I can't create storage more that
> >> 1.5Tb (while I need much larger storage ~50Tb if it's possible
> >> with ATS at all)
> >>
> >> Got message:
> >>
> >> [Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk
> >> operation failed WRITE -1 22
> >> [Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to
> >> clear cache directory '/cache/trafficserver/cache.db
> >> 589824:393207737'
> >> [Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to
> >> initialize the cache for http: cache disabled
> >> [Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
> >> [TrafficManager] ==> Cleaning up and reissuing signal #15
> >>
> >> If I set storage for example 1Tb everything work as expected
> >> without warnings.
> >>
> >> Tried to use raw device as storage, and got message "Currently Raw
> >> Disks are not supported":
> > Igor added FreeBSD raw disk support recently, but I don't think
> > that's in any released version. Can you build master from
> > git://git.apache.org/trafficserver.git and test that?
> >
> >> [Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently Raw
> >> Disks are not supported
> >> [Nov 30 16:57:07.928] Server {34418488320} WARNING: could not
> >> initialize storage "/dev/da0" [Currently Raw Disks are not
> >> supported]
> >> [Nov 30 16:57:07.928] Server {34418488320} NOTE: cache clustering
> >> disabled
> >>
> >> If I missed the same thread, where the same issue was solved,
> >> please point me on that.
> >> Any help will be very appreciated.
> >> Thanks in advance.
> >>
>
>
--
Igor Galić
Tel: +43 (0) 664 886 22 883
Mail: i.galic@brainsware.org
URL: http://brainsware.org/
GPG: 6880 4155 74BD FD7C B515 2EA5 4B1D 9E08 A097 C9AE
Re: Storage on FreeBSD (file and raw device issues)
Posted by Vladyslav Bachynskyi <v....@gmail.com>.
I have already built the 3.3.1 dev version under FreeBSD and added the
raw (zfs) disk to storage.config.
All looks good at the moment, but full testing I'll be able to make in
Monday at job.
Thanks,
On 12/01/2012 06:08 PM, James Peach wrote:
> On 30/11/2012, at 10:55 PM, Vladyslav Bachynskyi <v....@gmail.com> wrote:
>
>> Hi All.
>>
>> I'm working on optimization of our CDN, and ATS is looks like a solution that can fit our requirements.
>> But I'm in stuck at the moment :(
>>
>> Trying to make work trafficserver-3.0.5 (from the ports tree) on FreeBSD 9.1, but I found, that I can't create storage more that 1.5Tb (while I need much larger storage ~50Tb if it's possible with ATS at all)
>>
>> Got message:
>>
>> [Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk operation failed WRITE -1 22
>> [Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to clear cache directory '/cache/trafficserver/cache.db 589824:393207737'
>> [Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to initialize the cache for http: cache disabled
>> [Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
>> [TrafficManager] ==> Cleaning up and reissuing signal #15
>>
>> If I set storage for example 1Tb everything work as expected without warnings.
>>
>> Tried to use raw device as storage, and got message "Currently Raw Disks are not supported":
> Igor added FreeBSD raw disk support recently, but I don't think that's in any released version. Can you build master from git://git.apache.org/trafficserver.git and test that?
>
>> [Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently Raw Disks are not supported
>> [Nov 30 16:57:07.928] Server {34418488320} WARNING: could not initialize storage "/dev/da0" [Currently Raw Disks are not supported]
>> [Nov 30 16:57:07.928] Server {34418488320} NOTE: cache clustering disabled
>>
>> If I missed the same thread, where the same issue was solved, please point me on that.
>> Any help will be very appreciated.
>> Thanks in advance.
>>
Re: Storage on FreeBSD (file and raw device issues)
Posted by James Peach <jp...@apache.org>.
On 30/11/2012, at 10:55 PM, Vladyslav Bachynskyi <v....@gmail.com> wrote:
> Hi All.
>
> I'm working on optimization of our CDN, and ATS is looks like a solution that can fit our requirements.
> But I'm in stuck at the moment :(
>
> Trying to make work trafficserver-3.0.5 (from the ports tree) on FreeBSD 9.1, but I found, that I can't create storage more that 1.5Tb (while I need much larger storage ~50Tb if it's possible with ATS at all)
>
> Got message:
>
> [Nov 30 16:16:23.669] Server {34418534400} WARNING: cache disk operation failed WRITE -1 22
> [Nov 30 16:16:23.714] Server {34418512896} WARNING: unable to clear cache directory '/cache/trafficserver/cache.db 589824:393207737'
> [Nov 30 16:16:23.715] Server {34418513920} WARNING: failed to initialize the cache for http: cache disabled
> [Nov 30 16:16:23.715] Server {34418513920} NOTE: cache disabled
> [TrafficManager] ==> Cleaning up and reissuing signal #15
>
> If I set storage for example 1Tb everything work as expected without warnings.
>
> Tried to use raw device as storage, and got message "Currently Raw Disks are not supported":
Igor added FreeBSD raw disk support recently, but I don't think that's in any released version. Can you build master from git://git.apache.org/trafficserver.git and test that?
>
> [Nov 30 16:57:07.928] Server {34418488320} WARNING: Currently Raw Disks are not supported
> [Nov 30 16:57:07.928] Server {34418488320} WARNING: could not initialize storage "/dev/da0" [Currently Raw Disks are not supported]
> [Nov 30 16:57:07.928] Server {34418488320} NOTE: cache clustering disabled
>
> If I missed the same thread, where the same issue was solved, please point me on that.
> Any help will be very appreciated.
> Thanks in advance.
>